The Lumberman's Exchange - LBX Online Magazine

CLEEREMAN AUTOMATIC CARRIAGEYour Most Profitable Sawmill Investment.

12 MOdELsA CArriAge To FiT Your operATion!

CARRIAGEDRIVES

50HP - 400HP Hydraulic, Hydrostatic and Electric

QUALITY & SERVICE!

Why has CleeremAnSold over 900 Carriages? The Answer is Simple...

All Machines are Cleereman Quality Throughout.You Get the Best Machines Backed by the Top Service

in the Industry – Call Cleereman Today!

2500 lbs.

3500 lbs.

• The Sawmill Industry's Premier Bar Type Log Turner• Hydraulic Power Units• Track Frames, Husks & Sub Structures• Sawyers Cabs & Custom Built Control Cabs• Airbag & Hydraulic Cable Tensioners• All Types of Material Handling Equipment

CLEEREMAN Not JuSt CarrIageS & DrIveS!

[email protected]

PHONE: 715-674-2700FAX: 715-674-7002

5500 PINE ST., NEWALD, WI. 54511

2008 JD 548 GIII Grapple SkIDDer

Low Hours! Item ID: 12398Contact: TomPh: 800-315-9950 x604

MaCHIne wILL seLL FasT!New engine.tem ID: 12370Contact: DarenPh: 800-315-9950 x603

1998 Morbark 1300 WCl

DealS of the Month

www.LBXonLine.com

for classifieds call (800) 315-9950 or (615) 349-1890 or

Since 1986 - The Original (800) 315-9950 or (615) 349-1890December 2011

With your smart phone: Scan QR Code to visit—

í

CLEEREMAN AUTOMATIC CARRIAGEYour Most Profitable Sawmill Investment.

12 MOdELsA CArriAge To FiT Your operATion!

CARRIAGEDRIVES

50HP - 400HP Hydraulic, Hydrostatic and Electric

QUALITY & SERVICE!

Why has CleeremAnSold over 900 Carriages? The Answer is Simple...

All Machines are Cleereman Quality Throughout.You Get the Best Machines Backed by the Top Service

in the Industry – Call Cleereman Today!

2500 lbs.

3500 lbs.

• The Sawmill Industry's Premier Bar Type Log Turner• Hydraulic Power Units• Track Frames, Husks & Sub Structures• Sawyers Cabs & Custom Built Control Cabs• Airbag & Hydraulic Cable Tensioners• All Types of Material Handling Equipment

CLEEREMAN Not JuSt CarrIageS & DrIveS!

[email protected]

PHONE: 715-674-2700FAX: 715-674-7002

5500 PINE ST., NEWALD, WI. 54511

[email protected] or WWW.CleereMan.CoM

Loggers • Sawmills • Pallet Manufacturers • Wood Recycling Equipment

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

TimberHarvesTing equipmenT

Turn your loader into a self-propelled firewood processor capable of picking logs

out of the pile and cutting and splitting them onto the ground or conveyor or into a trailer, truck or bin. Operated by one person seated in the comfort and safety of the loader’s cab, the HFP160 is designed for commercial firewood operations and, when compared to traditional mechanical firewood processing methods can:

Reduce manpower requirements • Reduce work comp costs • Reduces fuel consumption • Improve safety • Provide greater mobility • Dramatically reduce set up time • Reduce handling of the wood • Lower your cost per cord for an improved • bottom line

The standard HFP160 is equipped with a 4-way splitter head with hydraulic height adjustment and 16” and 20” cut lengths. Optional interchangable 6-way and 8-way splitter heads and longer cut lengths are available.

For the past 37 years, Hahn Machinery has been noted for offering simple, rugged, and productive forestry equipment and the HFP160 is no exception

HaHn MacHinery inc. P.O. Box 220 • Two Harbors, MN 55616

www.hahnmachinery.com

Call Today1-800-483-8825

for complete details and a free DVD or email [email protected]

Covered by US Patent #7,669,618

Hahn HFP160 Firewood Pro

For Classifieds Call Your LBX REP at 1-800-315-9950 The Original Lumberman’s Exchange n 5

For ClassiFieds Call 800.315.9950

See pictures, prices, and location of all equipment at

www.lBXonline.comBLOWERS

Phelps blower - Phelps blower - Item ID-11742 - Daren 800-315-9950 x603

CHIPPERS CM&E 36” chipper. Bottom discharge. - CM&E 36” chipper. Bottom discharge. 75 HP - Item ID-11751 - Daren 800-315-9950 x6032000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 - Daren 800-315-9950 x6032008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x60448” Precision Chip Pack - Precision 48” 3 knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID-12128 - Daren 800-315-9950 x603Fulghum 54” 8 knife chipper. - Fulghum 54” 8 knife chipper. Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID-11737 - Daren 800-315-9950 x603HMC 48” Chipper - HMC 48”side entry, top discharge chipper. It hs a model CM

** INFO LINK **AJD Forest Products ................31Amark ..........................................7B & B Mfg. .................................37B. H. Payne ................................13Baker .....................................6, 15Bartlett Saw Service ................27Bay Equipment .........................29Brewer Eagle .............................20Buck Equipment (AIM) ...........14Cleereman Industries ................1Cook’s Saw Mfg.........................15Cord Master ..............................22Corley Mfg .................................33CRD Metalworks .......................23Dyna Products ..........................18Firewood Equipment Sale .......38Hahn Machinery .........................4Jackson Lumber .......................38James G Murphy Auction .....10Kasco-SharpTech .......................9 Lignomat ...................................19Litco ...........................................13

The Original Lumberman’s

exchange

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ad-vertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its prin-ciples and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2011 by Woods Publishing.

** Auctions **James G. murphy — page 10

www.murphyauction.comTiz’s Door sales, inc.

Thursday • December 8 • 10:00 a.m.2118 38th Street, Everett, Washington

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

Publisher Woods Publishing

Advertising sAles Morris Woods (615) 349-1890 [email protected]

design director Heninger & Associates [email protected]

equiPment rePs Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

mAiling Address P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

Ad submissions May be sent to— [email protected]

PostmAster Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** CALeNdAr **oreGon loGGInG ConferenCeComing feb. 23–25, 2012 Eugene, Oregon

WooD TeChnoloGy ClInIC anD ShoWComing March 13–15, 2012 Portland, Oregon

LM Equipment, Canada .............3Logical Fiber .............................24M&F Gauge ................................14Machinery Sales Co., Inc. ..........8Menominee Saw .......................35Midwest Sharpening Service ..28Multitek .....................................16Phase-A-Matic ...........................21Piper’s Saw Shop ......................30Resource Recovery ..................26Rotochopper ............................40Row Electric..............................34Sawmill Exchange ....................31Select Sawmill ...........................32Sering Sawmill ..........................21Sharp Tools ...............................39Suffolk Machinery ......................2TNT Transport Services..........12Truck & Trailer World .............17US Blades ..................................36Woodmizer ............................9, 25X-S Iron ......................................11

Happy Holidaysfrom all of us at the Lumberman’s Exchange

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

ad

dre

ss o

r

ad

d y

ou

r n

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Ori

ginal

Lum

berm

an’s

Exc

hang

eP

.O. B

ox 1

916

Col

umbi

a, T

N 3

8402

❑ P

leas

e ad

d ❑

Ple

ase

Chan

ge

❑ P

leas

e Re

mov

e

Co

mp

an

y n

am

e*

Indi

vidu

al N

ame

Add

ress

C

ity

Sta

te

Zip

Pho

ne

*Com

pany

nam

e an

d ad

dres

s re

quir

ed to

pro

cess

you

r cha

nge.

✁

6 n December 2011 Visit us online at www.LBXonline.com!

EquipmEntREpREsEntativEs

Daren Bodine Phone: 800-315-9950 ext. 603

Tom HirtPhone: 800-315-9950 ext. 604

CaLL us ToDay For aLL your useD

equIPMenT neeDs!

fREE EquipmEnt listings! Call –(800) 315-9950

The Most

Popular Band

Resaw in the

World!

Your Log To Lumber Leader

The Model “A” Baker Band Resaw:One of the All-Time Greats!

[email protected]: (800) 548-6914www.logtolumber.com

DealS of Month fRoM–November–

for classifieds call (800) 315-9950 or (615) 349-1890

See Photos online at— www.LBXonline.com

2006 JD650-J Dozer w/WInCh

servICeD & reaDy! Item ID: 12317Contact: TomPh: 800-315-9950 x604

PrICeD To seLL FasT!Single man operation w/circle sawItem ID: 12370Contact: DarenPh: 800-315-9950 x603

fIreWooD proCeSSor

58” Chipper with Factory Warranty. - Item ID-12232 - Daren 800-315-9950 x603Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 - Daren 800-315-9950 x603

COMPLETE SAWMILLSFrick Automatic Sawmill - Frick Automatic Sawmill, 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID-12217 - Tom 800-315-9950 x604Meadows #2 Sawmill - Meadows #2 carriage - 15’

48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID-11750 - Daren 800-315-9950 x603Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603Precision 58” Chipper - Complete rebuilt Precision


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save Your

Stubs & Pieces!➨

Now AcceptingVisa & Mastercard

2004 Barko 375a Loader on rough Terrain CarrierHandles bad ground conditions.

Item ID: 12283Contact: Tom800.315.9950 ext. 604www.LBXonline.com

1995 Franklin Tree Farmer Model C6 Forwarder


RunS Good!

whirlwind Pneumatic Pop sawItem ID: 12406Contact: Daren Ph: 800-315-9950 x603www.LBXonline.com

OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Daren 800-315-9950 x603Sawmill With Chipper - Carthage carriage, helle sawmill and chipper - Item ID-11992 - Daren 800-315-9950 x603

EDGERS & GANGSMeadows 7” X 48” Combination edger - Meadows 7” X 48” Combination edger. Serial # T7-1738-99. Was once used with a shifting saw. Some,

but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic roller

holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’

- Item ID-11733 - Daren 800-315-9950 x603Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Daren 800-315-9950 x603

FIREWOOD PROCESSORS2006 Timber Wolf Firewood

Paul Gang RipsawGlobe Panel RipsawKimwood Short Block RipsawGlobe Strip SawSalem Late Model Combination EdgerMereen-Johnson 48” Ripsaw

FILING ROOM EquIPMENTHanchett 84” Challenger GrinderMVM 160” Mag Bed Grinder (2) Vollmer CH210 Auto SharpenersGockel 163” Mag Bed GrinderArmstrong 3-10C Stretcher RollVollmer Cana E (8)Wright Mod. 1801 (3) Weinig R 934 Profile GrinderNewman G-200 GrindersHanchett Knife Grinders (10)Wright W-1600 Auto TipperArmstrong No. 90 EqualizerArmstrong Dual Side GrinderArmstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleHanchett DN-40 Knife GrinderArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 B.S. Stretcher Roll

HOGS & PuLvERIzERSWilliams 30KS Hammer Hog Jeffrey 36 x 60 ShredderZeno Low-Noise GrinderWest Salem Big Brute GrinderJacobson Hammer MillJeffrey 76WBH Horiz. HogGruendler 50XE Hammer Hog

MISCELLANEOuS10’ Hydraulic Lumber StackerCEMCO Combination Planer/Sander (2) Peerless 24-Unit BinsTektronix Log Metal DetectorDog Ear MachineIndustrial 3496 Finger Jointer

(866) 241-2977

Over 13 Acres Of GreAt Buys On used equipment!For complete equipment list, visit our website:www.machinerysales.com

Or Call and ask fOr dept. lX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers a-20, a-62, a-66 stetson-ross Planers 6-12-a1, 6-12-c1, 6-10-a1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

We are parTiNG ouT

When Calling Ask for Dept LX • [email protected]: 503-285-6691 • Fax: 503-285-0449

World’s larGesT iNveNTorynew & Used sawmill & Planing Mill equipment

9802 north Vancouver Way

Portland, oregon 97217

Arasmith Lilly Pad Chipper

Coastal Narrow Lumber Planer

Kockums L&B 7 ft. Air Strain Bandmill

We are oVerSToCkeD! prICeS reDUCeD!Take aDVanTaGe of ThIS ChanCe To SaVe bIG!

BANDMILLS & HEADRIGSKockums L&B 7’ Air St. BandmillKockums 6’ Air Strain BandmillMebor Horizontal BandmillSalem 6’ Air Strain BandmillSalem 5’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air Strain

CARRIAGES & DRIvESSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear CarriageUSNR 2000, 42" Stud CarriageSalem 60” 4-Block CarriageSalem 42” 4-Block Carriage

CHIPPERS & SCREENSKockums 66” Horiz. Feed Precision 58” Horizontal FeedArasmith Lilly Pad ChipperPrecision 48” 8-Knife Drop F.BM&M 5’X14’ ScreenRotex 6’X16’ ScreenWest Salem 58" Horizontal FeedPrecision 8X8 ScreenPrecision 66" Horizontal F.Precision 118” HFBD ChipperPrecision 96” Whole LogPrecision 48” Horizontal F.CM&E 36” Rechipper

DEBARkERSNicholson 22” A-5 Debarker

EDGERS, GANGS & RIPSAWSMereen-Johnson 424DC RipsawPinheiro Dip Chain Ripsaw

Industrial FJS-25 Finger J. SystemHurricane 28” Chop SawFruilmac End MatcherL&M Log Cut-Off SawsTimesaver Sanders (6)Lumber Stackers (3)Irvington 20’ Trimmer, 1’ Saws5-Arm Hyd. Tilt HoistSticker Recovery System

PLANERS & MOuLDERSNorthfield Double Surfacer Yates-A-63 16-Knife Planer Pkg.Coastal 16-Knife 9” Planer Pkg.Weinig 22B Complete LineWeining 22A 5-HeadStetson-Ross Timber SizerMattison 226 12” MoulderMattison 228 16” MoulderDiehl 6-head TF MoulderBuss 55 Double SurfacerBuss 88 Double SurfacerWadkin 6-Head MoulderWeinig U22A, 6-headNewman 382 Double SurfacerNewman M712 12-KnifeS-R 6-10-A1 10-KnifeCoastal 24” 20-knife PlanerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersWeiniig P22N 5-Head

RESAWSBrewco B-800 Resaw Salem 5’ Air Strain HorizontalSmith Twin Horizontal ResawMcDonough 54” Twin Horizontal 36” Tri-State Tilting ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed ResawSalem 6’ Horiz. Air StrainKockums 6’ Horiz. Twin Air Strain


2003 Franklin q70 Grapple skidderItem ID: 12337Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

2000 Morbark 22rXL ChipHarvesterItem ID: 12397Contact: Daren800.315.9950 ext. 603www.LBXonline.com

Processor with 26’ conveyor - 2006 Timber Wolf Firewood Processor with 26’ conveyor, 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren 800-315-9950 x603Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604Firewood Processor Single man operation with Circle Saw - Firewood Processor Single man operation with Circle Saw, 2 splitting stations, hydraulic conveyor, 2 extra blades, 2 wedges 353 Detroit Power unit - Item ID-12370 - Daren

800-315-9950 x603New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model. Standard features include a live deck, fold-able stacking conveyor, and a foldaway hitch for easy storage. The 18GM Firewood processor is capable of splitting up to two cords per hour at the centralized operator station. The 18GM is built with heavy-duty construction, offers a quiet Honda engine, and is perfect for the small start-up operation or weekend warrior. - Item ID-12299 - Tom 800-315-9950 x604

FORkLIFTS1994 Moffett Truck Mount Fork Lift - Very clean machine. Runs well. Owner using now. 2686 Hours. Priced to sell. Great for

Buy a WM3500 before the end of this yearand get a free cab with heating and air conditioning!

800.553.0182woodmizer.com

FREE

ACT NOW! Call before December 31.

A $5,420* savings!

Copyright 2011, Wood-Mizer Products, Inc. *Prices are in U.S. dollars and subject to change without notice.

delivering products or working in warehouse with high reach. This is a bargain! - Item ID-12321 - Tom 800-315-9950 x6041995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID-11892 - Daren 800-315-9950

x6032000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 - Daren 800-315-9950 x6032004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way


James G. Murphy Inc.Commercial & Industrial Auctioneers

1.800.426.3008 - 425.486.1246www.murphyauction.com

PUBLIC AUCTION

10AM - THURSDAY - DECEMBER 82118 38th St, Everett, WA NO MINIMUMS - NO RESERVES

Bid live or bid online with MurphyLIVE!

2004 Timesavers Vision Wide Belt Sander; Timesavers 2300 Wide Belt Sander; KVAL Pre-Hung Door Machine w/KVAL Door Assembly System; KVAL Beveler/Door Sizer; SCMI Sliding Panel Table Saw; Jamb Nailer; Jamb Machine; Shaper; (3) SPIDA Saws; Planer; Table, Band, Radial Arm Saws; Jointer; Shaper; Routers; Sanders; Boring Machines; Drill; DELLE VEDOVE UV Coater; LANTECH Shrink Wrapper; Hand & Power Tools; INT’L 22’, (2) ISUZU 20’ Van Trucks; Forklift; (2) Walk Behind Forkifts; More!!

TIZ’S DOOR SALES, INC


Contact Us for your equipment needs. If we don't have it, we can find it!

304.872.298894 Bandit 1400 Track Chipper - 6 BT Cummings power plant, Cat U/C at 60%, Disk style chipper head, continous rotating grapple, 14 in tree max for chipping, showing 5,128 hrs. ..................$41,00099 Int eagle - N 14 525 Cummings motor, 18 speed Eaton trans, 46 full locker rears, Tag axle at rear of frame, 4 sets of bunks, set up to pull pup trailer ...........................................................$37,50007 John Deere 450J - 6-way hydraulic blade, closed cab with heat and air, forestry package with winch, 60% on tracks and UC showing 3,177 hrs. ........................................................ $48,500Husky Brute XL235 - CRT bucksaw with interchangeable measuring deck, continous turn Rotobeck grapple, cummings powered, on a Pitts 5th wheel trailer, showing 6,250 hrs. .......... $35,000aluminum framed log trailer with four (4) sets of bunks ............................................... $7,500

2001JD 644H wheel LoaderItem ID: 12379Contact: Tom800.315.9950 ext. 604www.LBXonline.com

2000 CaT 962G wheel LoaderItem ID: 12407Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

2003 Morbark 1300 wCL Tub GrinderItem ID: 12401Contact: Daren/Michille800.315.9950 ext. 603

www.LBXonline.com

steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604

GENERATORS350 KVA Cummins - Genset with 9000 hours. - Item ID-11994 - Daren 800-315-9950 x603

HOGS/WOODGRINDERSWest Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Daren 800-315-9950 x603

kNIFE GRINDERSHanchett Circular saw grinder - Hanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Daren 800-315-9950 x603Schneider Pattern Knife

Grinder - Schneider Pattern Knife Grinder - Item ID-11743 - Daren 800-315-9950 x603

LOGGING EquIPMENT1961 Caterpillar 944 Wheel Loader - 1961 Caterpillar 944 Wheel Loader, Tire, Brakes, Bucket all are in good shape, Machine is Ready to work Serial #43A1589 - Item ID-12156 - Daren 800-315-9950 x6031974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple Price : 15,500.00 USD - Item ID-11979 - Daren 800-315-9950 x6031976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. - Item ID-12249 - Tom 800-315-9950 x6041977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x6041978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering.

Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x6041979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #:

440C334150T - Item ID-12091 - Tom 800-315-9950 x6041981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%. Comes with forks, owner also has bucket. - Item ID-12359 - Daren 800-315-9950 x603

2004 Prentice 384D w/Delimber & Ground sawItem ID: 12402Contact: Daren800.315.9950 ext. 603

www.LBXonline.com


west salem Grinder & Gen setItem ID: 12386Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

2007 Case 1150K DozerGood road builder!Item ID: 12348Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

1983 Caterpillar 988B Loader with very low hours - 1983 Caterpillar 988B Loader, Hours 5228, Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID-12375 - Daren 800-315-9950 x6031984 John Deere 540B Skidder - 1984 540B Skidder

95% Rubber Transmission Rebuilt Winch Rebuilt Front Rear end Rebuilt Rebuilt Radiator - Item ID-12343 - Tom 800-315-9950 x6041984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom

800-315-9950 x6041985 Timberjack 230 Cable Skidder - Still a strong working machine. Detroit 3-53 recently rebuilt. 28L tires at 30 - 40%, PLUS 2 spare axles, 3 spare tires & riims, and a spare transfer case! Winch pulls strong. Excellent value! - Item ID-12272 - Tom 800-315-9950 x6041986 Peterson Portable Flail Debarker - Excellent Condition. 4600 hours. Cummins 6 cylinder engine. Ready to work. CA - Item ID-12187 - Tom 800-315-9950 x6041987 Cat 988 Loader with Forks - 27,000 hours. Fair Condition. Big capacity. - Item ID-12186 - Tom 800-315-9950 x6041987 Clark F67 Skidders: 2 Running; 2 for Parts! - Customer selling 2 running Clark F67 Grapple Skidders and including 2 more F67’s

for parts. Running units have Cummins Engines, one has 28L x 26 tires at 65%; Other running unit has 30.5 x 32 tires at 20%. Owner ready to sell! Great package deal! - Item ID-12326 - Tom 800-315-9950 x6041988 (est) Franklin Model 3000 (3-Wheeled) Shear - Reconditioned. No hour meter. Tires at 80% with chains. John Deere engine. S/N 16088. Runs well. Water tank. Good for small thinning jobs. - Item ID-12394 - Tom 800-315-9950 x6041989 CAT D5H TSK - 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 - Daren 800-315-9950 x6031989 Clark 666 Dual arch grapple skidder - 1989 Clark 666 Dual arch grapple skidder, The machine has a new cummins 5.9l engine


When You Buy Your Circular Saws From B.H. PayneYou’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

1998 valmet 911.1 HarvesterGreat Price!Item ID: 12338Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

2005 Prentice 384 w/saw HookupsItem ID: 12396Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 - Daren 800-315-9950 x6031990 John Deere 640D Grapple Skidder - 1990 John Deere 640D Grapple Skidder, Single arch, Esco grapple, 30.5-32 tires. - Item ID-12214 - Daren 800-315-9950 x6031991 Cat 518 grapple skidder - 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 - Daren 800-315-9950 x6031991 Hydro Ax 221 - 1991 Hydro Ax 221 hour meter

broken good tread good running condition includes bush hog attachment - Item ID-11769 - Daren 800-315-9950 x6031991 Hydro Ax 221 - 1991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 - Daren 800-315-9950 x6031991 John Deere 548D Grapple Skidder - 1991 John Deere 548D Grapple Skidder with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x6031992 Ardco Swamp Trencher - Model H-150. SN:1522. Only 2200 HRS. Very Good Condition. DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation Tires at 98%. This machine only offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground


Real Tuff BaleR&BaggeRtm

phone: (325) 641-8300 fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$14,907

Real Tuff IndusTRIes

REAL TUFF INDUSTRIES

PO Box 693Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

Brownwood, Texas 76804Phone: 325-641-8300 Fax: 325-643-3243

. Easy to use

. Built of high quality materials and workmanship

. Heavy Duty to enable a broad spectrum of baling options

.Easily loads by conveyor or manual method

Most Popular Baler Sizes

12” x 16” x 36”12” x 16” x 32”11” x 17” x 36”8” x 18” x 36”

Real Ruff Baler Size

5” x 10” x 16” - Call For Price

4.0 cubic foot bale3.5 cubic foot bale3.9 cubic foot bale3.0 cubic foot bale0.4 cubic foot bale

Bale Size Bales per Hour

50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour50 - 60 bales per hour

. .Custom baler’s can be manufactured to your specifications

Real Tuff Baler Dimensions & Specifications

2 - Hydraulic Cylinders are controlled by using a two spool valve

30 H.P. motor (220/440 volt 3 phase) starter not included

25 G.P.M. Pump

50 Gallon reservoir capacityOnly the highest quality industrial components are used

Terms: 50% deposit upon receipt of purchase order. The blance is due upon completeion which will be approximately thirty daysfrom placement of order. F.O.B. Brownwood.

03/08

Dear Prospective Customer,

Thank you for inquiring about our Real Tuff Baler! From baling wood shavings to aluminumcans, the Real Tuff Baler is built to last, and priced for a quick return on your investment!

Real Tuff Baler

Real Tuff Baler Price: $12,997.00

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!Electric or diesel, Manual or Automatic

• Easy to use

• Built of high quality materials and workmanship

• Heavy duty to enable a broad spectrum of baling options

• Easily loads by conveyor or manual method

Real Tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

Effective May 1, 2011

conditions. This machine almost walks on water! Service records and books available from owner. FOB: GA. - Item ID-12312 - Tom 800-315-9950 x6041992 JD 650G Dozer w/Winch and 6-Way Blade - One owner. Undercarriage at 70%. Runs good. 9523 hrs. Transmission was re-built about a year ago 75% undercarriage. Good running machine. Well maintained. Root rake. Super Clean! - Item ID-12301 - Tom 800-315-9950 x6041992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats. Strong 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. Has a 20” shear head. - Item ID-12285 - Contact-Chris WOODS - Phone- 800.315.9950 Ext- 6001992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96” - Top Henge Rear Gate - Spring Suspension - Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID-12341 - Tom 800-315-9950 x6041992 Timberjack 240 Cable Skidder - New drop in 4 Cyl. Cummins engine. New transmission. 23.1 x 26 Tires 80%. Chains 75% good. Gearmatic winch.

Just spent $4000 on brakes. Excellent value. FOB: NH - Item ID-12274 - Tom 800-315-9950 x6041993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950 x6041993 WHO P12-63XSHD - 1993 W.H.O. P12-63XSHD, 700 HP CAT 3412 Engine, owner used it to grind mulch, comes with misc. parts, Approx. 13000 hours and is working daily. Engine was rebuilt by Cat 4500 hours ago. Owner is selling due to buying a larger machine. This machine won’t last!!! - Item ID-12139 - Daren 800-315-9950 x6031994 (est) Hydro-Ax 221 (3-Wheeled) Shear - No hour reading. John Deere 100HP engine. Tires at 90%. Reconditioned. S/N 4244L. Runs good. - Item ID-12395 - Tom 800-315-9950 x6041994 Caterpillar 518C Grapple Skidder - 1994 518C Caterpillar log skidder. Serial number 9HJ00425. This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses. The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch


50” Heavy Duty Log TroughItem ID: 12383Contact: Daren800.315.9950 ext. 603www.LBXonline.com

1993 Morbark Model 20 Tracked Chipper Has loader! Runs great!Item ID: 12339Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

packs. Installed new door latches. Doors open and close good. All fluids and filters have been changed. The tires are 28L- 26 in size and the tread will average about 40 percent. Machine has been sanded and painted. The hour meter is showing 4163. The engine cranks up instantly and the

transmission shifts good - Item ID-12302 - Daren 800-315-9950 x6031995 Franklin Tree Farmer Model C6 Forwarder - 6BT Cummins engine; 30.5 x 32 tires at 50%; Ice chains on front; New pins and bushings on loader; Four bunk, 18’ bed; 4 speed power-shift transmission; Dual controls. No hour

meter. Good Condition. - Item ID-12328 - Tom 800-315-9950 x6041995 Hanover Model D3 Forwarder - 5156 Hours. Loader has great lift capacity. Tires 70% or better. Adjustable bunk extension for longer wood. New exhaust. New batteries. Strong engine and transmission. Has 8 work lights. TX - Item ID-12162 - Tom 800-315-9950 x604

1995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%. Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800-315-9950 x604


P.O. Box 170 • Prentice WI 54556-0170 • 800-243-5438www.multitekinc.com • [email protected]

Multitek firewood ProcessorsIncrease your productivity and profitability

• Quality Equipment to Reduce your Labor Costs• Circular Saw or Bar & Chain Models• 7 Models to Choose From• Production Ratings up to 5.5 Full Cords Per Hour

Made in the U.S.A.

1995 Timbco 445 w/quadco HotsawItem ID: 12388Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

2010 valmet 860.4 Forwarder$70,000 below new!! Less than 1,000 hrs.

Item ID: 12351Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

LoAdEd!!!

1996 Timberjack ForwarderItem ID: 12364Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

Iron Mule 4500Item ID: 12365Contact: Daren800.315.9950 ext. 603www.LBXonline.com

1995 Prentice 210D Log Loader with delimber - 1995 Prentice 210D Log Loader with delimber, Hours Read: 12,191, S/N 210P50962, Mounted on a 1995 Evans 45’ Trailer - Item ID-12384 - Daren 800-315-9950 x6031995 Timbco 445 with

Quadco hotsaw - 1995 Timbco 445, approx. 9000 hours, New track Drive Motor, Cylinders just packed, Cummins engine, u/c 60%, this machine is in the woods daily - Item ID-12388 - Daren 800-315-9950 x6031995 Timbco T445 with Quadco 22” head - 1995 Timbco T445 with Quadco

22” head, 4600 hours on Total rebuild, New table and pins, new engine, new wiring harness, new track adjusters with zero hours on them, all new left rollers, 4 out of 7 rollers have been replaced on the right side, U/C is 65%, Tracks are in good shape 70% approx., new hour meter was installed with new engine. - Item ID-12346 - Daren 800-

315-9950 x6031995 Timberjack 380C Cable Skidder - Very clean unit. Working today in hardwood. Less than 3000 on rebuilt Cummins 6BT engine. Tires at 70%. Winch works great. - Item ID-12273 - Tom 800-315-9950 x6041996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with


www.blackstonebeaver.com

Firewood Processors

P: (508) 478-5902 123 Uxbridge RoadF: (508) 321-9876 Mendon, MA 01756

The Blackstone Beaver ComponentsThe Blackstone Beaver Firewood Processor is built in the USA with industry standard com-ponents. Hydraulic systems built with high quality Parker hoses and hose ends.

PLC controls and electronic valves reduce operator error and optimize speed.

SizeMaximum log length is 25' with a 24" diamat-er. Cut length is adjustable up to 24" long. Splitting head can be adjusted by up to 10" for consistent splits on various log diameters.

CustomizationBlackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid-mount.

SpeedThe processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

Enclosed CabOperator comfort in the enclosed cab •Dual joystick controls ease hand fatigue•

Out-feed ConveyorControl conveyor hydraulically from cab •Conveyor hydraulically folds for transport •Cleated belt holds wood securely •4" cleanout area allows small debris to fall•

3-Strand Live DeckLargest hydraulic folding deck in the business•Deck folds into the machine for transport •

I lackstoneeaver

I lackstoneeaver

Firewood Processors

P: (508) 478-5902 123 Uxbridge RoadF: (508) 321-9876 Mendon, MA 01756

The Blackstone Beaver ComponentsThe Blackstone Beaver Firewood Processor is built in the USA with industry standard com-ponents. Hydraulic systems built with high quality Parker hoses and hose ends.

PLC controls and electronic valves reduce operator error and optimize speed.

SizeMaximum log length is 25' with a 24" diamat-er. Cut length is adjustable up to 24" long. Splitting head can be adjusted by up to 10" for consistent splits on various log diameters.

CustomizationBlackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid-mount.

SpeedThe processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

Enclosed CabOperator comfort in the enclosed cab •Dual joystick controls ease hand fatigue•

Out-feed ConveyorControl conveyor hydraulically from cab •Conveyor hydraulically folds for transport •Cleated belt holds wood securely •4" cleanout area allows small debris to fall•

3-Strand Live DeckLargest hydraulic folding deck in the business•Deck folds into the machine for transport •

I lackstoneeaverI lackstoneeaver

Operator comfort in enclosed cab•Dual joystick controls ease hand •fatigueComfortable, adjustable seat•Joystick controls•Engine controls inside cab•

The Blackstone Beaver ComponentsThe Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.

sizeMaximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

CustomizationBlackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid mount.

speedThe processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

Featuring our exclusive split belt design stand alone

conveyer. We CUSTOMIzE any length

and option available! Call today for more

information!

(508) 478-5902

Featuring: exclusive split Belt, stand alone Conveyor

chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x6041996 BARKO 275B - 1996 BARKO 275B, 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 - Daren 800-315-9950 x6031996 JD770BH Motor Grader - 7720 Hours; s/n DW770BH557633. 12’ Blade; JD 6076 Engine. Very well maintained. Runs strong. Excellent price. - Item ID-12313 - Tom 800-315-9950 x6041996 Timberjack Forwarder - Timberjack forwarder, runs strong, good machine. Double bunk, extenda boom, 43” wide tires. Cummins 4BT 140-hp standard. Can drive in both directions. About 4500 hours. - Item ID-12364 - Daren 800-315-9950 x6031997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID-12229 - Tom 800-315-9950 x6041997 CATERPILLAR D5H TSK II - 1997 CATERPILLAR D5H TSK II, 6330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800-315-9950 x6031997 CLARK 666 Dixie Special - 1997 CLARK 666 Dixie Special, Grapple, winch, heat and air,

Cummins 6BTA 6cyl engine, 177HP, 80” Grapple, Grapple fully open is 10’ from the outside edges. This machine is in excellent condition and is a must see,

it has approx. 5000 hours, center pins are in great shape, Tires are very good rears are 98% and fronts are 85%, Don’t let this machine pass you by!!! - Item ID-

12137 - Daren 800-315-9950 x6031997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine.


For Firewood Production - Take Your Pick

*Production rate may vary based upon log size, quality, power source used and operator skill.

The Dyna SC-14 or SC-16

Packed and ready to go!

12 Years of Building Quality Machines!

toll free: 1.888.820.3962local: 231.734.4433fax: 231.734.36816228 60th Avenue, Evart, MI 49631

Both Give you High Production in an Affordable and Profitable Processor The SC-14 (pictured) Offers • Low Initial Investment • Powerful Hydraulic Operation • Flexible Power Options – PTO, Gas or Diesel • Large 12’ x 14” (18” Max) Log size • Easy to Operate Controls • Pull with any pickup! • Sets up Fast! • Production from 1.5 – 3 full cord per hour!*

DYNA Portable Sawmills

Shell Forest Products, Harrodsburg, KY Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN Warrick Hallet 320.864.4340

PDG Sales, Medina, NY Philip Graber 585.798.2969 SC-16 Demo Model Available

North Country Hydraulics, Potsdam, NY Ben Deschaine 315.842.0388

Riehl’s Sawmill Sales, Lykens, PA Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV Bill Mollard 304.940.0749

Call the Dealer Nearest You!


1995 Prentice 210D Log Loader w/DelimberItem ID: 12384Contact: Daren800.315.9950 ext. 603www.LBXonline.com

1994 CaT 518C Grapple skidderItem ID: 12302Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

2007 Tigercat 234 Loader w/slasherItem ID: 12347Contact: Tom800.315.9950 ext. 604www.LBXonline.com

2010 Barko 295ML Loaderw/CSI Slasher; 300 hours! Full warranty!Item ID: 12352Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 x6041997 JD 650-G Dozer - Only 3000 hours. One owner machine. Very well maintained. New undercarriage in 2008. Open ROPS cab. 6 way blade. Runs great. Good steady machine. Has 3rd spool, but no winch. - Item ID-12399 - Tom 800-315-9950 x6041997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% - Item ID-12130 - Daren 800-315-9950 x6031998 Barko 160D Loader - 1998 Barko 160D Loader, s/n 22409 6cyl Cummins engine, Lever controls, Continuous rotation grapple. Trailer and delimber are not included - Item ID-12207 - Daren 800-315-9950 x6031998 Cat D4 Grapple Dozer - D4HTSKII Cat w/ Esco Grapple. Serial#TSK1990... Unit has 3600 hrs. good undercarriage grapple and winch. LGP pads. Runs well. Goes where skidders can’t. -

Item ID-12324 - Tom 800-315-9950 x6041998 Morbark 1300 WCL, NEW ENGINE!!!! - 1998 Morbark 1300 WCL, Cat 3412, 860HP Engine, 4500 frame hours, 1600 hour on complete engine rebuild (over $22,000 in engine), both cylinders rebuilt on tub, New Conveyor Belt, New Tires, New Fresh Paint, Owner has spent over $35,000.00 in the past year on this machine! They are selling because they are going out of business - Item ID-12408 - Daren 800-315-9950 x6031998 PRENTICE 310E - 1998 PRENTICE 310E, Machine is ready to work, overall condition “GOOD” - Item ID-12033 - Daren 800-315-9950 x6031998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine. Works well. New Cummins 6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 - Tom 800-315-9950 x6041998 Valmet 911.1 Harvester - Single Owner machine. Super Clean and ready to go to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than

4 gal/hr. Slide Boom design easy to learn and operate. - Item ID-12338 - Tom 800-315-9950 x6041999 CAT 330 with Bucket & Thumb - Estimated 4500 hours. 40% undercarriage. Final Drives and Drive Motors just replaced. 42” Bucket with Fixed Thumb and Stump Ripper. S/N 6BR03006. Some cosmetic damage. Engine runs good.

Cab clean with working AC and heat. - Item ID-12250 - Tom 800-315-9950 x6041999 Hydro-Ax 611 EX - 1999 Hydro-Ax 611 EX, Cummins (Recon) DR1477RX SN: 60301916 HP: 215 CYLINDERS: 6 HOURS on new engine: 7613 total hours, AIR CONDITIONING, PAINT: Fair, BODY: Good GLASS: Fair, tire size 67 x 34.00-26 CONDITION: All


Complete reman: Precision 58” Chipper w/warrantyItem ID: 12232Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

Clark 664D Cable skidderItem ID: 12221Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

good, Hydro-Ac side cut head. - Item ID-12195 - Daren 800-315-9950 x6031999 Prentice 410E Loader with CTR Delimber - 1999 Prentice 410E Loader with CTR Delimber, 5166 hours, The paint is in fair condition all around, The glass inside the cab is missing from the sliding glass window, and also the glass in the door is cracked. The interior is in poor condition, the majority

of the problem being the windows. - Item ID-12191 - Daren 800-315-9950 x6031999 Prentice 620 Harvester - Ponsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value. Quebec, Canada - Item ID-12134 - Tom 800-315-9950 x6041999 Tigercat 720B Feller Buncher - 1999 Tigercat 720B Feller Buncher, 5600 actual hours, Machine has

new (crate) engine from Cummins with Machine has new (crate) engine from Cummins with 1293 hours on it. Very good running machine. All Pins & Bushings Tight. Machine operated very well. A/C very cold. Machine is in Alabama - Item ID-12181 - Daren 800-315-9950 x6031999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court

settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x6042000 Cat 550 Harvester w/Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID-12349 - Tom 800-315-9950 x6042000 CAT 962G Wheel Loader - 2000 CAT 962G Wheel Loader worked at a concrete plant in its


• Standard 404 Pitch Saw Chain, with 3/8 Kerf

• Automatic Chain Oiler• UL Approved, Wired to NEMA

Standards

We alSo offer The folloWInG:Spare Sawbar (all types) and Repair Center for All Used Bars

Saw Chain Loops or Reels • Chain Take-up assemblies

Sering Sawmill machinery co., inc.(360) 687-2667 Phone • (360) 687-2917 fax

[email protected]

1984 John Deere 540B skidderLow price, has grapple!Item ID: 12343Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

48” Precision Chip Packw/90’ vibrating conveyor

Item ID: 12128Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

Motivated Seller- ready to Work -

prior life. Less than 1000 hours on its rebuilt engine and transmission. The machine comes with a five (5) yardbucket and has had a complete overhaul of the air conditioning system that includes a new compressor, condensor, lines and coil. The work to the air conditioner was a four thousand dollar ($4000 USD) investment. The machine has approximately 11,000 frame hours. The glass on the can is cracked

on the front three panes and can be easily replaced if so desired. Otherwise, this is one of the best running wheel loaders in the market right now at its current price. - Item ID-12407 - Daren 800-315-9950 x6032000 Morbark 22RXL Chiphavester - 2000 Morbark 22 Chiphavester, The infeed area has been beefed up with T-1 steel for more strength and longer life with less weight. Enclosed weatherized operator’s cab tilts hydraulically for transport . Overall Length

38” Transport height 13’ 6” Width 10” 6” Weight 70000 lbs. Chipping capacity 22” diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-315-9950 x6032000 Sterling Road Truck/

Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x6042001 Cat D5C XL Dozer

5’-7-1/2” X 14’ BM & M ChiP

SCReen2 Decks• 5’ x 10’ Screen Size• Top Screen 2” squares• Bottom screen 3/8” mesh•

(800) [email protected]

Exceptional prices • Excellent service

Falcon Rotary Hog36” x 60” Rotary Hog• c/w (2) 200hp motors• c/w Infeed Chute•



Highest Production

Lowest Maintenance

Guaranteed!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 RogeRs Road,

PeRth ,

ontaR io K7h 1P9

Canada

www.cord-master.comEmail : [email protected]

NewGrappleSyStemNow Available!

Today!888-219-9663


The WOODBINEis the PROFESSIONAL’S CHOICE!

If you want to know what a Woodbine can do,don’t ask us (or our competition),ASK OUR CUSTOMERS.

ALL MACHINES NOW FEATURING PUSH BUTTON, FAST CYCLE SPLITTER STANDARD!

17 Hyde Hill Road, Williamsburg, MA 01096Email: [email protected]

Performance, Power & Profi tFirewood Processors

“I recently purchased the Woodbine Rapido Loco and I’m very pleased with it’s performance. I looked at other processors and for the quality and output I don’t believe you will fi nd a better one out there. The Rapido Loco is a no-frills workhorse. It’s easy to operate, simple to maintain and quick to set up. The staff at CRD Metalworks is both thorough and experienced and as a family business they provide the kind of support I expect as a customer. I would recommend the Wood-bine line-up to anyone looking to purchase or upgrade their fi rewood mill…(as long as they’re not my competition!)” — Matthew Ward, Maine, USA

Matthew, Alicia and Jaxson Ward

Our competition spends it’s time trying to knock us down.We spend our time supporting customers like

Matthew and his family, who depend on their Woodbine everyday.

Call 888-667-8580 todayfor the real Woodbine experience.

2005 JD 648G III Dual arch Grapple skidderItem ID: 12330Contact: Daren 800.315.9950 ext. 603

www.LBXonline.com

2009 JD 240DLC w/Denarco DM4150 strokerSave $100K! 2300 hrs!


REducEd!

2007 Tigercat 630C skidderOne owner, Big capacity!Item ID: 12275Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

CaT Dozer D4e w/winchItem ID: 12369Contact: Daren 800.315.9950 ext. 603

www.LBXonline.com

- Only 2250 hours. Just serviced by local Cat Dealer. Undercarriage 70%. Open ROPS Cab. 6-way Blade. Individual no longer needs. Great price! One owner for general maintenance and clean up of ranch in TX. - Item ID-12382 - Tom 800-315-9950 x6042001 JD 644H Wheel Loader - Very Clean Machine. 5400 hours. 624 H John Deere; 160 HP Diesel; A/C and heat; Single lever control; Front Hyd Ride control; L-3 20.5x25 Tires; Battery Disconnect; Front and rear fenders; Tires at 60%. Well maintained. Runs good. Strong engine. - Item ID-

12379 - Tom 800-315-9950 x6042001 Komatsu PC200LC6C - 2816 Hours. Bucket and thumb. 36” triple grouser pads. Very nice machine. One owner. - Item ID-12322 - Tom 800-315-9950 x6042001 MCB 621REG Trommel Screen with Radial fines conveyor - This is a 2001 MCB 621REG. Radial fines conveyor, fixed overs conveyor, tipping grizzly bars, radio remote. It has just over 8,200 hours, has had the drum replaced, has new rollers, and a new belt and it was just sand blasted, painted and has all new decals. Also, one of the grizzly tipping cylinders was just replaced, and other work has just been completed. The machine

runs great and is ready to go to work - Item ID-12358 - Daren 800-315-9950 x6032001 Prentice 384 Knuckleboom Log Loader - 2001 Prentice 384 Knuckleboom Log Loader, Cummins 6BT 5.9L engine, joystick control, enclosed cab, delimber, saw package hook ups. - Item ID-12212 - Daren 800-315-9950 x6032001 Timbco 445D with Quadco Sawhead - 12,560 hours. Runs good. Undercarriage 50%. 540 degree non continuous rotation on upper. Quadco 22” saw with continuous rotation. About 3000 hours on rebuilt engine. Areas to repair: some cracked track pads, 2 or 3 cracks in lower carbody that were welded, and may need new seal on one of the pumps. Great value. - Item ID-12288 - Tom 800-315-9950 x6042001 Timberjack/Deere 840 FB - Total hours = 8700. 75 hours on Rebuilt Engine. Machine is tight and dry.

New Oil Cooler. Joy Stick Steering. 34” Tires at 70%. JD 22” Saw Head is tight and runs well. Very clean unit and a great price. - Item ID-12410 - Tom 800-315-9950 x6042002 John Deere 435 Knuckleboom Log Loader - 2002 John Deere 435 Knuckleboom Log Loader, Joystick control, saw package hookups, delimber. - Item ID-12215 - Daren 800-315-9950 x6032002 John Deere 648G III TC Grapple Skidder - 2002 John Deere 648G III TC Grapple Skidder, Dual arch, Torque converters, winch, 30.5-32 tires - Item ID-12293 - Daren 800-315-9950 x6032002 John Deere 648GIII Dual Function Grapple Skidder - 2002 John Deere 648GIII Dual Function Grapple Skidder, 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily.


reduced for Quick Sale!

2008 valmet 890.3 20-Ton ForwarderLow hrs. Tracks!Item ID: 12263Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

- Item ID-12231 - Daren 800-315-9950 x6032002 Timberjack 608s with hot saw - 2002 Timberjack 608s with hot saw, approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Daren 800-315-9950 x6032002 Vermeer Horizonal Grinder Model HG365 - 2002 Vermeer Horizonal Grinder Model HG365, Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x6032003 Cat 525B S/A Skidder - Good condition. 10,500 hours. New Transmission. Recent work done. Runs well. CA - Item ID-12189 -

Tom 800-315-9950 x6042003 Franklin Q70 Grapple Skidder - 2003,Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800-315-9950 x6042003 Timbco T445-D w/Quadco 2800 Saw Head - 4400 Hours; Quadco 2800 Intermittent Head with 360 degree rotation. Head has new disc and saw motor. Lower has 28” pads. Undercarriage needs pins, bushings and rails and then

should be good for 5000 more hours. One owner who maintained very well. Idle for over a year, but is started every week and cycled. Cummins 260HP. - Item ID-12320 - Tom 800-315-9950 x6042003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included. - Item ID-12254 - Tom 800-315-9950 x6042004 72” CSI R72 Circle Saw - Year model 2004,

hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500.00. Was over $40,000.00 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000.00 USD - Item ID-12125 - Daren 800-315-9950 x6032004 Barko 375A Loader on Rough Terrain Carrier - Mounted on rough terrain carrier. 40’ boom , hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours. Rotobec continuous grapple. Very nice machine. - Item ID-12380 - Tom 800-315-9950 x6042004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x6042004 Hood 28000 Loader with hotsaw - Year model 2004; 72” hot saw; has 8000 hours. - Item ID-11418 - Daren 800-315-9950 x6032004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N


PRicE dRoPPEd!

‘95 Timberjack 380C Cable skidderItem ID: 12273Contact: Tom 800.315.9950 ext. 604www.LBXonline.com

2006 JD 848G SkiDDeRBuy Customer Direct with LBX!Item ID: 12327Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

Precision 58” Chip PackItem ID: 12233Contact: Daren800.315.9950 ext. 603www.LBXonline.com

‘02 JD 648G III Dual Function Grapple skidderItem ID: 12231Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

HA18599. Cummins 205HP Engine. Hydrostatic drive. Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID-12316 - Tom 800-315-9950 x6042004 JD/Timberjack 608S w/Waratah 622 processing head - 6809 Hours. One owner. Rebuilt undercarriage, now at 50%. Waratah 622 can have top saw added. Good condition. Forestry Package. Serial numbers available for both machine and head. LA - Item ID-12161 - Tom 800-315-9950 x604

2004 Peterbuilt 357 Log Truck with Pup and Loader - Super Clean rig ready to roll. Peterbuilt has Cat C-15 engine and only 159,000 miles. Includes 2000 Model Pitts Pup Trailer. Loader is 2004 Prentice 124 w/Rotobec Grapple installed by Huber Bros. Installation includes Oil Tank/Cooler in Headache rack. Cat 18 speed Transmission. 20,000 lb Fronts; 46,000 lb Rears. One owner. You won’t find a cleaner truck. - Item ID-12368 - Tom 800-315-9950 x6042004 Prentice 384 TMS Loader Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good. Working on job today. Good condition. TN - Item ID-12171 - Tom 800-315-

9950 x6042004 PRENTICE 384D with Delimber and Ground Saw - 2004 PRENTICE 384D with Delimber and Ground Saw, approx. 7000 hours, A/C, Cummins 6BTA Engine, this machine is currently in the woods and is a “WOODS READY” machine!! - Item ID-12402 - Daren 800-315-9950 x6032004 Valmet 425 Ex-10 Harvester - 4700 hours: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 - Tom 800-315-9950 x6042005 Prentice 384 with Saw Hookups - 2002 Prentice 384 with Saw Hookups, 10123 Hours, 2nd owner, This machine is in very good condition and is ready to work!!! - Item ID-12396 -

Daren 800-315-9950 x6032005 Prentice Model 410E w/TMS Package - 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained. KY - Item ID-12079 - Tom 800-315-9950 x6042005 Valmet 860.1 8-Wheeled Forwarder - 10,900 hours. New hydraulic transmission. Good condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Blade on front and hood guard. - Item ID-12267 - Tom 800-315-9950 x6042005 Valmet 941 Harvester with TWO 370.2 Heads - The largest of rubber tired harvesters. 15,000 hours, very well maintained and working today. Good condition. INCLUDES TWO Valmet 370.2 harvesting heads. Long reach, leveling

Top quality blades with precision ground technology

Winter weather is here, but that doesn’t mean you have to put a freeze on sawing. Ask for the 4 or 7 degree in higher horsepower, larger sawing environments, or the 9 degree in low horsepower and smaller log applications.

Top quality blades with precision ground technology

WINTER SAWING

Copyright 2011, Wood-Mizer Products, Inc.

The Peak of Technology

800.522.5760 SawFaster.com


2008 Morbark 3800 wood HogLower Price! Runs great!Item ID: 12277Contact: Tom 800.315.9950 ext. 604www.LBXonline.com

rayco stump Grinder rG1665aCItem ID: 12374Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

cab, and tracks for front bogeys make this a great value. Customer including Low Boy Trailer for legal transport. - Item ID-12265 - Tom 800-315-9950 x6042005 Valmet/Timbco 415 Harvester with 370E Head - Very nice unit. 6900 hours. 370E Harvesting head just added 18 months ago and only has 1500 hours. 36” Triple Grouser tracks at 70%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x6042005 Volvo L90E Wheel Loader w Forks & Bkt - 7561 Hours on this very nice woodyard loader. Volvo 119HP engine is stingy on gas. Includes 106” bucket for loading chips or waste. 20.5R25 tires at 80%. Comfortable cab with AC &

Heat. Ready to load today. - Item ID-12404 - Tom 800-315-9950 x6042006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service. 9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 - Tom 800-315-9950 x6042006 Barko 595 CRL Loader - 40’ Live Heel for high stacking. 8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%. Hyd tilt cab. Work ready! Good condition. - Item ID-12405 - Tom 800-315-9950 x6042006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready.

773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x6042006 JD 700J Dozer w/Winch - Super Clean Unit! Only 1850 hours. Enclosed cab with AC/Heat. Undercarriage at 75%. Sweeps and Winch. 6 way blade. One owner who maintained it very well. - Item ID-12391 - Tom 800-315-9950 x6042006 JD 700J Dozer with Winch - Very clean dozer with winch and low hours of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look. NC - Item ID-12101 - Tom 800-315-9950 x6042006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 - Tom 800-315-9950 x6042006 JD 848G Skidder - 5055 Hours. 30.5 Tires at 75%, but one tire at 30%. One Owner. Excellent condition due to great maintenance. Great price. Shop other similar units. This is clearly best value! - Item ID-12327 -

Tom 800-315-9950 x6042006 JD650-J Dozer with Winch - 2832 Hours. S/N T0650JX129263. Open Cab. JD 4.6 liter engine with 98HP. ROPS, Sweeps, Screens, 8’9” 6-way Blade, Winch w/ cable, 18” Pads. Undercarriage at 90%. Machine is very clean. One owner. Runs great. Road clearing, landing site maintenance, general dirt work, this unit is a great choice and great value! - Item ID-12317 - Tom 800-315-9950 x6042006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand New and has ZERO hours! It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI ground pressure. Superior traction and stability through Lamtrac’s unique quad track/double articulated platform. Priced well below dealer cost. This is a bargain from the manufacturer that won’t be seen again. See more at www.lamtrac.com. - Item ID-12353 - Tom 800-315-9950

Beaver Model 18

Coming Soon4 New Models

Safety�

Durable�

Reliable� Convenience�

The Firewood Factory�™�

™�

Reliable�™�

Safety�

Durable�

Reliable� Convenience�

The Firewood Factory�™�

™�

Reliable�™�

Made in the usaFirewood: Faster, Safer, Easier

feaTUreS:1 to 2 plus Full Cords per Hour •(128 cubic feet)Cuts up to 16” diameter and up •to 20’ lengths.Splits Wood from 12” to 24” •lengths.Splitter cycle time 4.5 seconds•Honda Engine GX-630 630cc•

Call Toll free

1-800-569-6813

www.woodbeaver.net | [email protected]


2002 vermeer Horizontal Grinder HG365Item ID: 12372Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

offERS WELcoME!

2007 CaT 325D w/624 waratah Proc. HeadExcellent cond! Must sell!


x6042006 Log Lift 115Z Foldable Self Loader - Never mounted. This loader is the highest quality on the market. Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load. Out & Down outriggers give maximum stability. Log Lift Loader also weighs 20% less than other loaders in it’s

class. Piston pumps give smooth fast cycle times. Cab is heated and has joystick controls. A/C can be added. This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x6042006 Morbark Hurricane 18 Chipper - Super clean chipper. 1050 hours. Strong engine. Great condition. Ready to go to work! - Item ID-12240 - Tom 800-315-9950 x6042006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top - Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires - Steel Disc Wheels - Good Floor Spring Suspension - Reyco 50% Tires - New Brakes - Item ID-12342 - Tom 800-315-9950 x6042006 PRENTICE 384 mounted on a Mack Truck - 2006 PRENTICE 384 mounted on a Mack Truck, 4600 hours, has been on a yard since 2006 Price : 80,000.00 USD - Item ID-12008 - Daren 800-315-9950 x6032007 Case 1150K Dozer -

2565 Hours on very strong dozer. Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID-12348 - Tom 800-315-9950 x6042007 Cat 325D w 624 Waratah Processing Head - 7800 hours. Very clean machine. Head updated.

Unit is working today. 34” Triple Grouser Pads. Great landing machine. - Item ID-12283 - Tom 800-315-9950 x6042007 JD 643J Feller Buncher w/Bunching Hot Saw - Original owner with excellent maintenance records. John Deere 20” FD 45 Bunching Head recently rebuilt. Total Hours = 7965.

22” Nicholson A5 Debarker

Air Seal Ring• C/W Operator’s Cab • & ConsoleReady to Load•



Nicholson Drum Chipper

38” x 42” Top Opening• Approx. 37” diameter • rotorDriven by 100hp, 460V, • 1180 RPM Mtr.




Call Marvin Miller for a quote 231-924-5953 • (fax) 231-924-6166 • 11606 Brickyard Rd. • Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang • Edger • ScraggTrim • Split • Strob

…and just about any Custom Saws you need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to ship from major manufacturers, including…

CaT excavator Model 235Item ID: 12371Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

euclid Dump Truck r-13Item ID: 12373Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

2005 valmet 941 Harvester w/(2) 370.2 HeadsMust sall! Includes trailer!


www.LBXonline.com

2005 volvo L90e wheel LoaderItem ID: 12404Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

w/Forks & Bucket

Only 3049 Hours on New Factory Re-manufactured Engine. Joy Stick Steering. 28 L 26 Tires - 90% on Front, 70% on Rear. Environmental Cab with A/C and Radio. Light Package. Clean, Tight and Dry. - Item ID-12279 - Tom 800-315-9950 x6042007 Kodiak Kutters Model B425 - Great condition with just 2500 hours. FAE Mulching Head Model 500-U. Cat C-13 engine with 425HP. Tracks at 50%. Serviced and ready to work. Compare this price....it’s below wholesale! - Item ID-12345 - Tom 800-315-9950 x6042007 Lamtrac Model LTR6125 Mulcher - NEW TRACK MULCHER W/ MAGNUM HEAD & WARN WINCH, 14 hours. The multipurpose LTR6125

offers the possibility to install an array of attachments to fit all your needs. Easily changing from a Mulcher to a Brush Cutter, Root Rake, or Dozer Blade, the LTR 6125 can get the job done quickly and efficiently without the hassle of having 4 machines to do one job... the LTR6125 does it all! Complete MFG Warranty included. - Item ID-12166 - Tom 800-315-9950 x6042007 Puma (K2) Forwarder - 2300 Hours. Excellent condition. Perfect for 2 to 4 load/day jobs. Small footprint. Low profile. Very strong loader with excellent reach. Ground clearance 23”. 23.1 x 26” tires at 80%. Cummins 130HP engine. Clark 3200 Power Shift transmission. Max speed 18MPH. Parker IQAN control system monitors all functions. Includes front

blade. Comfort cab with AC/Heat and Stereo. Similar unit new is $230,000! - Item ID-12390 - Tom 800-315-9950 x6042007 Tigercat 234 Loader w/Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple. CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite Ready. Less than half the price of new and in excellent condition. - Item ID-12347 - Tom 800-315-9950 x6042007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log Max 7000XT head. New pump for head. 36” Triple Grouser pads on 60% undercarriage.

Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. - Item ID-12366 - Tom 800-315-9950 x6042007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800-315-9950 x6042007 Timbco/Valmet 445EXL w/2800 Saw Head - Very limited use machine. Only 1240 confirmed hours. Quadco 2800 Intermittent Saw w/360 rotation and 12 tooth design. Upper unit has 360 rotation. Undercarriage at 75%. 24” single grousers. - Item ID-12392 - Tom 800-315-9950 x604


heaVy DUTy forkSaT bIG SaVInGS

■ IN STOCK■ SAME DAy ShIPMENT■ LET US QUOTE yOUR

SPECIAL DESIgN FORKS. VERy COMPETITIVE PRICINg.

bay eqUIpMenT Co. / (616) 392-1811P.O. BOx 1919 / HOlland, MicH. 49422 • Fax (616) 392-6238

email: [email protected] • www.bayequipmentco.com

Made from one piece of steel - not welded. Quality recognized world wide.

1-1/2” thick x 10” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . $2,600.00 pair2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $835.00 pair2-1/2” thick x 6” wide x 48” long (Surplus) . . . . . . . . . . . . . . . . . . $1,100.00 pair2-1/2” thick x 6” wide x 48” long . . . . . . . . . . . . . . . . . . . . . . . . . . $1,205.00 pair2-1/2” thick x 6” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . . . $1,365.00 pair

2-3/4” thick x 6” wide x 72” long . . . . . . . . . . . . . . . . . . . . . . . . $2,500.00 pair3” thick x 7” wide x 60” long . . . . . . . . . . . . . . . . . . . . . . . . $2,495.00 pair

3” thick x 7” wide x 72” long. . . . . . . . . . . . . . . . . . . . . $2,825.00 pair3” thick x 7” wide x 96” long . . . . . . . . . . . . . . . . . $3,530.00 pair

above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

3-1/2” thick x 8” wide x 60” long . . . . . . . . $3,595.00 pair3-1/2” thick x 8” wide x 72” long . . . . . . . . $3,990.00 pair3-1/2” thick x 8” wide x 96” long . . . . . . . . $5,025.00 pair

also, 4”, 5”, 6” thick forks to 168” long.

CaT 988B Loader Item ID: 12375Contact: Daren 800.315.9950 ext. 603

www.LBXonline.com

2009 Dynamic 585 whole Tree ChipperItem ID: 12400Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

BeSt chipper value

NeW!

2008 JD 548 GIII Grapple Skidder - Very Nice Machine with only 2100 hours. Single arch grapple; Winch; 28L tires at 75%; Comfort cab with heat and air. - Item ID-12398 - Tom 800-315-9950 x6042008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing machine. Super light foot print allows this machine to go where no other can and climb where no other machine dares! Cummings 290 HP provides maximum power to the head for best performance in its’ class. Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs. Operator comfort is second to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for

videos and specifications. - Item ID-12354 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III - 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/FOPS/OPS certified cab with premium comfort package. Its ingenious four track, double articulated design enhances

maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-9950 x6042008 Prentice 2764 w/Rotary Axe Brush Cutter - Super clean machine with only 1480 hours. Excellent condition. Great right of way maintenance machine. Comes with optional Prentice Hot Saw for tree felling. Customer must sell. - Item ID-12239 - Tom 800-315-9950 x6042008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 5300 hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes.

Great value! - Item ID-12119 - Tom 800-315-9950 x6042008 Valmet 890.3 20 Ton Forwarder - 5200 Hours. Excellent Conditon. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! Customer ready to sell. Tires at 50%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-315-9950 x6042009 Dynamic 585 Whole Tree Chipper - NEW! - Never Sold! Just 13 demo hours. Full factory warranty and updates. Model CH 585. S/N 5052. Cummins 500 HP Engine. 28” x 22” Capacity. Triple Chain Feed Deck. Cone Drum design for maximum fuel savings and best quality chips. Reversing engine fan. Best price on market! - Item ID-12400 - Tom 800-315-9950


PIPER’SSaw Shop

800 • 845 •6075

Promotional Pricing OfferSimonds Red Streak Hard Back

1-1/4” x .042 x 3/4” or 7/8”Length 13’2”

$14.27 eachTell us you saw it here!

LimitedTimeOnly$14.71 each

Franklin skidder 170PTItem ID: 12377Contact: Daren 800.315.9950 ext. 603

www.LBXonline.com

x6042009 Dynamic/Vector 7000 Whole Tree Chipper - NEW - Less than 125 Demo Hours. Powerful 700 HP engine. Weight = 60,000 lbs. Can handle up to 27” logs. 6 pocket drum gives maximum efficiency and best quality chips. Chipping - make chips to your specifications for fuel or other uses. Grind - process organics with light contaminants. Screen - size material to

meet a variety of markets. Replaceable screens to fit customer specifications. CAN-BUS (3) mode operating system monitors critical instructions and all processing choices. - Item ID-12403 - Tom 800-315-9950 x6042009 JD 240DLC w/Denarco DM4150 Stroker - Only 2200 hours. Owner selling out. This unit in MINT CONDITION! Price is what is owed on machine. Buyer may consider taking over

payments. One owner of course. Maintained to highest level. This is a great value and will not be on the market long. Not advertised anyplace but LBX! Note: No Butt Plate, or Measuring System-but can be added by buyer after sale. - Item ID-12308 - Tom 800-315-9950 x6042010 Barko 295ML Magnum with CSI 4400 Slasher - Very seldom does a loader like this come to the used machine market place.

Only 160 hours. Barko Magnum Series with CSI DM4400 Sawbuck. 32’ reach. Cummins 173HP engine. 4642 Rotobec Grapple. Mounted on a Pitts 39’ Trailer. Save thousands over new! - Item ID-12352 - Tom 800-315-9950 x6042010 JD 748H Grapple Skidder - Like New Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID-12282 - Tom 800-315-9950 x6042010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new forwarder! Only 722 hours. MFG warranty still applies. This machine is LOADED including the WEBASTO programmable pre-heater! Includes 2 sets of Eco Tracks; Blade, and Hood Guard. Owner changing jobs and no longer needs this machine. Save $50,000 off of new machine! - Item ID-12351 - Tom 800-315-9950 x6042011 JD 548GIII Grapple Skidder - Less than 600 hours. Full JD Warranty through March 2012. Extended warranty available from Deere. 28L Tires at 90%. Save $20,000 over new machine. Winch. Comfort Cab. Loaded! Great for working small tracts. - Item ID-12409 - Tom 800-315-9950 x6042011 JD Model 748H Dual


Sawmill ExchangEnorth america's largest Source

of Used Portable Sawmills.

over 800 ads:Portable Sawmills, Commercial Sawmills, Pallet and Cutstock Manufacturing, Firewood Manufacturing,

Chipping and Grinding, Trimmers, Debarkers, Dry Kilns, Edgers, Resaws, Ripsaws and Gang Saws, Loaders, Moulders and Planers, Sawdust Blowers and Chains,

Conveyors/Transfers/Decks/Green Chain, Rolling Stock, and Much More!!

The Place to Sell Your EquipmentCall Us for a Free List of Over 800 Ads

or to Sell Your Equipment.

800-459-2148 www.sawmillexchange.com

P.O. Box 710930 • Houston, TX 77271

US & Canada( )

aJD forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500Email: [email protected] • Web: www.ajdforestproducts.com

Dry Kilns • 2 sawmills • 25,000,000 BF annual ProDuction

Franklin skidder 142Item ID: 12376Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

2008 Lamtrac 8290 quad w/FAE 300-U HeadBELOW DEALER COST!


www.LBXonline.com

2009 Dynamic/vector 7000 Whole Tree ChipperBesT PrICe on 700hp Chipper!Item ID: 12403Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

NeW!

Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x604225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Daren 800-315-9950 x60350’ Heavy Duty Log trough - 50’ Heavy Duty Log trough, 2-15/16” Head Shaft, WD 110 Chain, 2 Sets of kickers to kick off either side, 5HP Electric Drive, Owner will will completely refurbish if needed - Item ID-12383 - Daren 800-315-9950 x603510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Daren

800-315-9950 x603Barko Knuckleboom - 2006, Model 495 Trailer Mounted , 3800 Hours , FEC Log Pro Buck Saw Included . Like new one owner machine! - Item ID-12153 - Tom 800-315-9950 x604Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603Caterpillar D4H Dozer 1903 Hours - 1993, Cat Model D4H XL, S/N 8J00374, 1903 Hours, PAT Blade, Laser Attachment, Winch, Cat 3304 Engine. Excellent Condition! - Item ID-12177 - Tom 800-315-9950 x604Caterpillar D6R - Caterpillar D6R with winch, hours 8211, s/n 5LN00696 Price

: 75,500.00 USD - Item ID-11906 - Daren 800-315-9950 x603Caterpillar Dozer Model D4E with winch - Caterpillar Dozer Model D4E with winch, 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603Caterpillar Excavator Model 235 - Caterpillar Excavator Model 235, 1239 hours,


2006 Barko 595 CrL LoaderItem ID: 12405Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

2006 Timbco/valmet 445eXL w/2800 Saw HeadOnly 1200 hours!Item ID: 12392Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x603Clark 664D Cable Skidder - Clark 664D Cable Skidder, 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-

315-9950 x603Deere 335 - 2006, Model 335, 5500 Hours, CTR 426 Delimber, Very good condition, one owner machine. - Item ID-12175 - Tom 800-315-9950 x604Eagerbeaver 20 Ton Trailer - 1987, Eagerbeaver 20 Ton Trailer, Tandem Axle, Dual Wheels, 8.25R15 Tires Good, Manual Fold Down Ramps,

Very Good Condition! - Item ID-12179 - Tom 800-315-9950 x604Euclid Dump Truck Model R-13 - Euclid Dump Truck Model R-13, Hours 3960, Engine Detroit Diesel - Item ID-12373 - Daren 800-315-9950 x603Franklin Skidder - 2003,Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front , 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 - Tom 800-315-9950 x604Franklin Skidder Model 142 - Franklin Skidder Model 142, Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603Franklin Skidder Model 170PT - Franklin Skidder Model 170PT, New tires,

New cable ,Hours 6585 - Item ID-12377 - Daren 800-315-9950 x603Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 - Daren 800-315-9950 x603Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New - Item ID-12365 - Daren 800-315-9950 x603John Deere 540B Cable Skidder - John Deere 540B Cable Skidder 23.1-26 tires. - Item ID-12210 - Daren 800-315-9950 x603John Deere 640E Skidder - 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Daren 800-315-9950 x603Mack Truck $48,500.00 - 1998, Model DM Mack Truck, 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck


www.corleymfg.com • [email protected]

CORLEY mfg

Now One Phone Puts You in Touch with ThE Single Source

for all your Sawmill Needs!CORLEY SAWMILL MACHINERY

TYRONE BERRY CARRIAGE DRIVESLEWIS CONTROLS OPTIMIZATION

Carriage linear & Set Shaftlewis Controls “electronics for sawmills by sawmillers”tyrone-Berry carriage Drives & Parts • Headrig slabbers

log turners • Bandmills & linebar resaw systems Board & Gang Edgers • trimmers

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key OperationMore Production & Profit is Only One Call Away

For Parts, Service & Sales

Call (423) 698-0284

1994 (est) Hydro ax 221 3-wheeled shearItem ID: 12395Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

1 of 2 availaBle

1988 (est) Franklin 3000 3-wheeled shearItem ID: 12394Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

LoW PRicE!

is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12178 - Tom 800-315-9950 x604MODEL 1300 SELF CONTAINED TUB GRINDER - MODEL 1300 SELF CONTAINED TUB GRINDER, CAT DIESEL ENGINE, READY TO WORK, CAB W/ A/C - Item ID-11792 - Daren 800-315-9950 x603Peterbilt Truck - 2000, Peterbilt Truck, Sleeper, Good running condition. - Item ID-12176 - Tom 800-315-9950 x604Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID-12174 - Tom 800-315-9950 x604Prentice 490 - 2006, Model

490, Dual Arch Grapple Skidder, 8000 Hours, 30.5x32 Tires Approx. 50%, Less than 500 hours on dealer rebuilt engine. One owner machine. - Item ID-12172 - Tom 800-315-9950 x604Rayco Stump Grinder Model RG1665AC - Rayco Stump Grinder Model RG1665AC, New teeth - Item ID-12374 - Daren 800-315-9950 x603Timbco Fellerbuncher - 2000, Model 425D , 8.3 Cummins Engine , approx. 7400 hours,U.C. New Drive Motors just installed. Like New , Timbco Bar Saw W/40 Degree Rotate with less than 1000 hours on it, Leveling System And Swing System Tight. Very Good Machine , Can Be Seen Working! - Item ID-12155 - Tom 800-315-9950 x604Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s

Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 x604WANTED: Older Clark Cable or Grapple Skidders still running - If you have an older Clark Cable or Grapple Skidder that you would like to sell, please call to discuss. Prefer Cable Units of any size. - Item ID-12151 - Tom 800-315-9950 x604

MISCELLANEOuS2007 Monarch Dynasty Motor Home - Unbelievable package! Less than 30,000 miles! Luxury at its’ best. Came to seller from Bank Repo. Allison Automatic Transmission; Cummins Diesel. Surround sound entertainment with 3 TV’s!

This is a top of the line motor home for a price you won’t believe. Call us for more amazing details of the features. If you want to cruise the highways....here is the way to go! NC - Item ID-12140 - Tom 800-315-9950 x604NEW 2010 Saukville Tractor - Cummins 37HP, hydrostatic drive, front & rear PTO & 3 Pt hitch. Cat 1 3-pt hitch, and drawbar, and can mount row crop (vegetable or nursery stock, including tree seedlings) cultivators under the front (between the rear wheels and front wheels), right in front of the operator who can then see the work easily and avoid crop losses from the cultivator going into the crop. Can also be fitted with a blade in the center, like a road grader, for light grading. It is completely hydrostatic drive. Has ability to drive attachments needing hydraulics (spraying equipment in fruit or nut orchards?). Can be fitted with a hydraulic drive PTO shaft (thus, infinite rpm adjustment). Specifications available on request. - Item ID-12300 - Tom 800-315-9950 x604


ROW ELECTRICAL EQUIPMENT, INC. YOUR SOURCE FOR USED, RECONDITIONED: • Squirrel Cage Motors • DC Motors - Crane and Mill • Transformers, Three-Phase • Gear Motors • Adjustable Speed Drives • Across/Line Magnetic Starters • Wound-Rotor Motors • Generators - AC and DC • Reduced Voltage Starters • Synchronous Motors • Engine-Generator Sets • Safety Switches • DC Motors • Transformers, Single Phase • Phase Convertors

Fax to: 800-248-4479 419-244-8887 419-248-4479

WE ANSWER ThE PhONE 24 hOURS • WE BUY USED ELECTRICAL

P.O. Box 2812 • Toledo, Ohio 43606

[email protected]

2001 Timberjack/Deere 840FBItem ID: 12410Contact: Tom800.315.9950 ext. 604www.LBXonline.com

1997 JD 650-G DozerItem ID: 12399Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

1981 Dresser 510BItem ID: 12359Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

MOuLDERS Fukami 6 head moulder - Fukami 6 head moulder NTX-150 - Item ID-11753 - Daren 800-315-9950 x603

PALLET MACHINERY2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Bob Hanna Double Head Pallet Notcher - Bob Hanna Double Head Pallet Notcher - Item ID-11815 - Daren 800-315-9950 x603Hawk Bandsaw Dismantler - Powered by a 3-phase, 15-hp electric motor. Has a 64” table. Can be a one or two-man machine. Large tires for extended blade life.

Capacity is 50-80 pallets per hour. Manufactured by Saw Service & Supply Co. - Item ID-11065 - Daren 800-315-9950 x603Mark I Pallet Dismantler - Mark One pallet disassembler, one-man, 62” table Mark I - Item ID-11811 - Daren 800-315-9950 x603Pallet Chief lll nailer - Pallet Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Daren 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-

11066 - Daren 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the

grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800-315-9950 x603

PLANERSnewman 4 sided planer - This 6-3/4” x 16” capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9” feed rolls rather than 8”. - Item ID-11729 - Daren 800-315-9950 x603Newman S682 two sided planer. 6”x30” capacity. 6


iNtroduciNg

JoCkeY GRinDeR oWneRS!!!are wear plates costing you too much money?

“eZ-SliDe” tooth StoP & tooth ReSt

this Patented, Spring Loaded design• Allows for EZ sliding of the grinding wheel to the tooth. • Eliminates the sticky divots of the old style wear plates.• Saves you time and money with better control of the sharpener and

more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

the eZ-Slide has saved many happy customers time and money.Call 1-800-582-0470 toDaY

Our sawyers say they will not go back to the old style parts.Joe NowakLumberjack HardwoodsMenominee, Michigan

This is one of the best innovations in our industry to come along in years. Where was this 30 years ago?Kevin Mueller Mueller Brothers TimberOld Monroe, Missouri

in Stock for:f and 2-1/2 style saws

B and 3 style coming soon

the Secret:the parts that touch the tooth don’t move!

www.menomineesaw.com [email protected]

knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. - Sectional top chipbreaker with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM,

feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with 2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 - Daren 800-315-9950 x603

RECYCLING EquIPMENT2002 Brush Bandit 250 - 2002 Brush Bandit 250 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hours on new engine, 1260+/- hours on frame, upper feed

wheel hydraulic lift, work ready! - Item ID-11835 - Daren 800-315-9950 x6032003 Morbark 7600 - 2003 Morbark 7600 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Daren 800-315-9950 x6032006 Morbark Hurricane 18 Chipper - Super clean

chipper. 1050 hours. Strong engine. Great condition. Ready to go to work! - Item ID-12240 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042009 Dynamic 585 Whole Tree Chipper - NEW! - Never Sold! Just 13 demo


Why?Why?We use only the highest quality nickel alloy steel •NEW• state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and •manufacturing experience

Proudly made in the • USAStock to 10 days on standard sizes•Nations largest distributor/manufacturer of saws •and knives

www.usblades.net

CALL 800-862-4544Locations in

• Hampden, ME • Meridian, MS• Florence, SC • West Monroe, LA

hours. Full factory warranty and updates. Model CH 585. S/N 5052. Cummins 500 HP Engine. 28” x 22” Capacity. Triple Chain Feed Deck. Cone Drum design for maximum fuel savings and best quality chips. Reversing engine fan. Best price on market! - Item ID-12400 - Tom 800-315-9950 x6042009 Dynamic/Vector 7000 Whole Tree Chipper - NEW - Less than 125 Demo Hours. Powerful 700 HP engine. Weight = 60,000 lbs. Can handle up to 27” logs. 6 pocket drum gives maximum efficiency and best quality chips. Chipping - make chips to your specifications for fuel or other uses. Grind - process organics with light contaminants. Screen - size material to meet a variety of markets. Replaceable screens to fit customer specifications. CAN-BUS (3) mode operating system monitors critical instructions and all processing choices. - Item ID-12403 - Tom 800-315-9950 x604Gyro Trac GT25 - Machine has 1278 hours. - Item ID-11801 - Daren 800-315-9950 x603Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Daren 800-315-9950 x603MORBARK 58 Chipper - MORBARK 58 3 knife Chipper, This machine is ready to work - Item ID-12082 - Daren 800-315-9950 x603Rayco Stump Grinder Model RG1665AC - Rayco Stump Grinder Model RG1665AC, New teeth - Item ID-12374 - Daren 800-315-9950 x603Rotochopper MC-166 XLT - This horizontal grinder is powered by a 460 hp CAT 3406 Diesel engine. CAT engine was replaced while under warranty in 2003. Built-in colorizer adds to the productivity as raw materials are colored at the same time they are ground. In-feed hopper is 16’ long by 66” wide. Rotor is 66” wide by 26” diameter. Unit has a variety of screens & screen sizes. The frame has approximately 3050 hours and the engine has approximately 2000 hours. Although this unit has only been used to grind pallets, it is also excellent for dry wall, bark, brush, green waste, trees, plastics, and garbage. - Item ID-12362 - Daren 800-315-9950 x603WHO P10-43SHD Tub Grinder - This 10-foot WHO tub grinder is powered by a 300 hp CAT 3306B Diesel engine. This tub grinder has been partially refurbished with new mill with swinging hammers, new hydraulic motors and pumps, and bearings, hoses and belts replaced as needed. Owner has also given it a fresh paint job and had the engine checked over. Two inch screens are installed. There are less than 4000 hours on this tub grinder. This


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WooD-paker! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing • 3007 West River Road • Olean, NY 14760

Toll Free 1-800-654-5320E-mail: [email protected] • Web: http://home.sprynet.com/~bbmfg/

Shrink Wrap FireWOOD/WaSteWOOD

financingavailable

2011 JD 548GIII skidderLIKE NEW: 600 hours!Item ID: 12409Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

‘01 woodmizer LT40Item ID: 12246Contact: Tom800.315.9950 ext. 604

www.LBXonline.com

grinder will grind all types of wood waste including pallets, limbs and brush, yard trimmings, paper, and much more. This tub grinder is in great shape and ready for work. - Item ID-12360 - Daren 800-315-9950 x603

ROLLING STOCk1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent

clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Daren 800-315-9950 x603

SAWMILL1992 Sanborn sawmill Mini-Max - 1992 Sanborn sawmill Mini-Max, 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. This machine has a log

cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x6031995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick. Price includes set up and training so you know you will be getting a great machine! - Item ID-12084 - Tom 800-315-9950 x6042001 Timber Harvester Grade Resaw System - 2001 Timber Harvester Grade Resaw System, Capacity

12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x6032003 Wood-Mizer LT70 Sawmill with Gang Rip Saw Package - Sold as package only. Great value! LT70-HD Sawmill features: Model: Woodmizer LT 70; Serial no. 456 C 724163NBA1052 A108; 18 ft. Main Table; 24 ft. Table Extension; 21 ft. Log Table & Log Rollers; Attachments for Shingle Sawing; Many extra attachments & extra bandsaw blandes; Engine for sawmill is Kabota diesel, Model 2KBXL01.5BAD. VIN: 1505 S-T-E. Condition: Excellent, Ready to

”Jackson has been around long enough so they’ve figured out

what works and what doesn’t.”

“Jackson Wood shaving Mills simply last longer. They’re rugged and dependable.”

“in volume tests on production, the Jackson Wood shaving Mill

was tops—and in day-in, day-out production, it’s still tops!”

“our Jackson shaving Mill was built in 1966 and is still going strong!”

“as our business has expanded, we’ve come back to Jackson for shaving Mills again and again.”

“We like the low maintenance and availability of manufactured parts for our Jackson equipment.”

What Our CustOmers are saying—

Questions about shaving mills

has 50 years of answers!plus The Original Patented WOOD ShAvINg MILL … Since 1960!

• several Models to choose from producing 7.4 cubic Yards (5.7 cubic Meters) to 50 cubic Yards (38.2 cubic Meters)

• Utilize low-grade logs & slabs

• Produce high-quality, fluffy shavings

• Powered by electric, Diesel or Tractor PTo

• complete wood shavings plant layout services available

• shavings Drying systems

Wood shaving mill

Manufacturers of —✔ shaving Mills✔ Webb solid-fuel Burners✔ “Premier” scragg Mills✔ stationary sawmill carriages✔ Feedworks, Decks, Turners✔ Hydraulic, electric and electronic setworks✔ Vertical edgers, Horizontal edgers✔ “lumber Harvester” Portable sawmills

SOLD AROUND ThE WORLD

AND MADE IN ThE U.S.A. Website: www.JacksonLbrharvester.com

phone: (715) 926-3816Fax: (715) 926-4545

CoMpAny, InC.

830 n. state road 37, Mondovi, Wisconsin 54755 Usa

We HaveDryers

available siNGle or Twin-Box maChiNe?We oFFer boTh.

phoNe us For deTails.


‘06 JD 540GIII Cable skidderGreat Condition; Low hours!Item ID: 12411Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

Haybuster IG-10 Tub GrinderItem ID: 12361Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

wHo P10-43sHD Tub GrinderItem ID: 12360Contact: Daren800.315.9950 ext. 603

www.LBXonline.com

Operatate. Hours on Mill - 636.8; Details on Gang Rip Saw: Diesel engine: Kabota Model D905-E; VIN: 456A114163 MBA 2401 A2.02; Family, 2KB X L01.OBCB; Extension tables, extra blades; Condiiton: Excellent, Ready to operate; Hours on Gang Ripsaw = 208 Hours. - Item ID-12393 - Tom 800-315-9950 x6042008 Challenger Grinder Model CHSP 200-4090 - Like New Condition. Only 315 hours. 120HP - 3 phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604log decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame. Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 - Daren 800-315-9950 x603

SHAvING EquIPMENT2009 Salsco 30 Shaving Mill - 2009 Salsco 30 in. Shaving Mill, 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Tom 800-315-9950 x604vEHICLES-TRuCk/TRAILER/vAN

1996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Daren 800-315-9950 x6032000 Peterbuilt Logging Truck - 2000 Peterbuilt, N-14Cummins engine,

18spd., 120 Prentice loader, pup trailer. - Item ID-12159 - Daren 800-315-9950 x603Bayliner Ciera - Call Daren at 800-315-9950 Ext. 603 to discuss. Comes with tri-axle trailer - Item ID-12363 - Daren 800-315-9950 x603

WOODWORkINGLarge Array of Lumber Mill Processing Equipment - Owner of large facility in NM is selling off surplus machines no longer in use. Go to wwwlbxonline.com and search for this item to see many different

machines and tools such as a Tri State gang rip saw; Deihl 5 head Moulder; Complete set of cutter heads; Zincker 20 inch 25hp gang rip saw (short length lumber); Trim Tables; GLover Dowel Moulder; Excel belt driven moulder; Six head Vonnegut 8 inch moulder; and more! - Item ID-12169 - Tom 800-315-9950 x604McDonough 54”band saw - This is a square column, weight strain machine. The serial # is 54 1076. - Item ID-11741 - Daren 800-315-9950

x603Whirlwind pneumatic pop saw - Whirlwind pneumatic pop saw, with 12’ in feed roller table, 3 phase 5hp electric motor. Fed from left to right, saw blade on the right side of machine. In like new condition, used in a one man shop part time for 2 years cutting KD pine lumber. This set up cost over $5000.00 new, includes a Reliant 2 bag dust collector and a 6’ motorized lazy susan work table. This machine is located in the northeast - Item ID-12406 - Daren 800-315-9950 x603

THE LuMBErMAn’S ExCHAnGEPost Office Box 1916Columbia, Tennessee 38402

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

New Track B-66

with Transport Dolly

Superior finished product control for biomass fuel, colored mulch, animal bedding, and other wood fiber commodities.

Electric or Diesel 150 - 875 Horsepower Portable, Stationary, or Track

Trust your wood fiber resources to the “Perfect In One Pass” TM advantage.

Rotochopper, Inc. | 217 West Street | St. Martin, MN 56376

The Lumberman's Exchange - LBX Online Magazine

Documents

Transcript of The Lumberman's Exchange - LBX Online Magazine