LBXonline presents The Lumberman's Exchange

Since 1986 - The Original (800) 315-9950 or (615) 349-1890January 2011

DEALS OF THE MONTH

RECONDITIONED NICHOLSON A5 DEBARKER

Jem Machine, Inc."Your full source of Good Sawmill Equipment"

www.JemMachine.com

FALCON/KIMWOOD HOG

NEW - NEVER INSTALLEDMORBARK TIMBER STACKER, Comes w/ 90ft. of Rail

CALL OR EMAILMIKE FREEMAN(503) 407-9652

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

4 n January 2011 Visit us online at www.LBXonline.com!

Jem Machine, Inc."Your full source of Good Sawmill Equipment"

www.JemMachine.com

P.O. Box 108125 Airport RoadGrangeville, Idaho

83530

Call or Email:Mike Freeman

(503) [email protected]

Your Dollar Goes Further on Equipment with Us!

Office:

(800) 282-5597Fax:

(208) 983-0633

Inventory Changes Daily

Call Mike for your equipment

needs.

HOG & CHIPPERS

GRAYCO METAL BUILDING

Ready to Install at your facility!75’ w x 270’ l x 24’ h

We have (14) 24 - 30 ready for shipment and some still standing.

(2) 24-UNIT CHIP BINSTruck Bins (24 to 62 Unit)

FALCON/KIMWOOD HOGChippers & Hogs (20hp to 500hp)

NICHOLSON 22” A5

In Stock35” & 44”

ARMSTRONG #4

$4,900

20 USNR DOUBLE LENGTH INFEED

MORBARK STAC TRACw/ 95’ of Track

NEW—NEVER

INSTALLED$24,500Bargain Basement Prices

For Classifieds Call Your LBX REP at 1-800-315-9950 The Original Lumberman’s Exchange n 5

FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comBANDMILLS & HEADSAWS

Timber Harvester 36HTE Band Sawmill - Purchased new in Oct. of 2005 for $41,690. It has the following extra features 1. Hydraulic power rolls- for exiting large cants/timbers 2. 30 HP Electric three phase motor 3. Large roller guide assembly 4. 3rd log post 5. Dual chain drive assembly 6. Electric Set works 7. Dragback guide assembly 8. 4’ bed extension Saw is capable of sawing up to 22’ long We were sawing 5-6 MBF per day when we took it out of production. Everything is in working condition. Ran indoors forless than 8 months. Replaced with a larger saw. - Item ID-10489 - Tom 800.315.9950 x604

BLOWERS45” Bayley material blower 25HP - This 45” Bayley Mfg. blower has a 20-1/4” side inlet and a 12” top outlet. The fan diameter is 36” and the housing width is 15-1/2”. It has a 25 HP 220/440 drip proof motor with a 6-B drive. - Item ID-11783 - Daren 800.315.9950 x603Chicago Blower - Siemens 75-hp motor, Series 30GI blower. 1775 RPM. - Item ID-10820 - Michelle 800.315.9950 x606Koger Blower - 75-hp, 54”x16” fan, 18” inlet and 18” outlet - Item ID-10849 - Michelle 800.315.9950 x606Phelps blower with 20 HP motor - Item ID-11742 - Michelle 800.315.9950 x606

CARRIAGES & DRIVESSalem 4-headblock Carriage - Left handed - Item ID-10846 - Michelle 800.315.9950 x606

CHIP SCREENSMorbark Chip Screener - 6x6 chip screener with 5-hp fine sawdust blower and 10-hp chip blower with pipes. All Hydraulic. Good condition. - Item ID-10766 - Michelle 800.315.9950 x606

CHIPPERS CM&E 36” chipper. Bottom discharge. - 75 HP - Item ID-11751 - Michelle 800.315.9950 x6061994 WOODCHUCK - ASPLUNDH WOOD CHIPPER. Hrs: 2226, TIRES: 8.75-16.5LT, ID# 1W9B71210RS200896, WEIGHT IS 4000#, WD 17586, WOOD CHIPPER SELF FEEDER WITH FORWARD AND REVERSE CONTROL, 6 CYLINDER FOR GAS MOTOR, 16 INCH DRUM - Item ID-11807 - Daren 800.315.9950 x6032000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 - Michelle 800.315.9950 x6062008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hrs. Limited factory warranty on upgraded features. - Item ID-12059 - Tom

** INFO LINK **Amark .....................................12

Anson ........................................1

B & B Mfg. .............................31

B. H. Payne .............................15

Baker .................................17, 38

Bandit Industries, Inc. .............13

Bartlett Saw Service ................37

Bay Equipment ........................39

Ben Jones Equipment ........19, 27

Buck Equipment (AIM) .........16

Cardinal Wireless ....................30

Charleston Auctions ..............10

Concept Products ....................28

Cord Master ............................22

Corley Mfg ..............................35

CRD Metalworks ....................14

Dyna Products .........................18

Hutto Wood Products ..................

James G. Murphy..................11

Jem Machine .............................4

Litco ........................................15

LM Equipment, Canada ............3

M&F Gauge ............................25

Machinery Sales Co., Inc. .........8

Menominee Saw ......................34

Metal Detectors, Inc. ...............26

Midwest Sharpening Service ..37

Multitek ...................................32

Phase-A-Matic ........................29

Piper’s Saw Shop ....................24

Resource Recovery .................29

Rotochopper ............................40

Row Electric ............................19

Sawmill Exchange ..................33

Select Sawmill ........................26

Sharp Tool ...............................35

Suffolk Machinery ....................2

Truck & Trailer World...............7

US Blades................................36

Woodmizer ....20,21 (Centerfold)

X-S Iron ........................9, 23, 27

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lum-berman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out writ-ten consent.

©2011 by Woods Publishing.

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circu-lated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

SALES MANAGER Michelle Cappel (800) 315-9950 x606

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** Auctions **CHARLESTON AUCTION — Page 10

WWW.CHARLESTONAUCTIONS.COM

HUGE AUCTION IN HOUSTONSTOCK BUILDING SUPPLY SURPLUS

Thursday, January 13, 9 a.m. CentralOnsite Auction with Simultaneous Webcast

JAMES G. MURPHY — Page 11

WWW.MURPHYAUCTION.COMPUBLIC AUCTION - SOUTHWEST FOREST PRODUCTS

Ash Fork, Arizona

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

Th

e Original

Lu

mb

erm

an

’s E

xch

an

ge

❑ P

leas

e Ad

d ❑

Ple

ase

Chan

ge ❑

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.

✁


EQUIPMENTREPRESENTATIVES

Michelle Cappel Phone: 800-315-9950 Ext. 606Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

Call us today for all your used equipment needs!—Michelle

DEALS OF THE MONTH– JANUARY –

See Photos online at

Item ID: 12081Contact: MichellePh: 800-315-9950 x606

1996 BARKO 275B

2002 WOODMIZER LT-40HDG-25

10,450 hours. Rear Bogeys recently sealed. 8 wheeled. Good condition and well maintained. Eco Tracks. Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Motivated Seller! These machines go in wet conditions and hills. Priced way below market.

Item ID: 12068Contact: Tom 800.315.9950 Ext. 604

Item ID: 12076Contact: DarenPh: 800-315-9950 x603

2005 VALMET 890.2 20-Ton Forwarder

800.315.9950 x6042008 Model 570 Dynamic Chipper - 1830 Hrs; New Drum at 750 hrs; Cummings 325 HP Engine; New wear plates in belly pan and discharge chute. Remote Control. Runs good. - Item ID-12061 - Tom 800.315.9950 x60448” Precision Chip Pak - Reconditioned, new 100-hp motor, chip blower, cyclone, 5x5 screen with new screens 1-3/4” & 3/4”, 6 knife with 3 blocked off, 20-hp on blower, new bearings, new belts, new sheaves. Price includes loading on truck. - Item ID-11586 - Michelle 800.315.9950 x60666” Fulghum 8 Knife Chipper - with a 250 hp motor, $7500. - Item ID-10478 - Tom 800.315.9950 x604Can Car Chip & Saw grinder with air hold downs - Item ID-11738 - Michelle 800.315.9950 x606Fulghum 54” 8 knife chipper. - Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID-11737 - Michelle 800.315.9950 x606HMC 48”side entry, top discharge

chipper. It hs a model CM 48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID-11750 - Michelle 800.315.9950 x606Hydraulic Feed Chipper - BANDIT 4B Cummins Power, Works Well - Item ID-11806 - Michelle 800.315.9950 x606Precision 48 Chipper & Shaker - Fines blower and dual trailer shoot. 125-hp electric motor and 36’ vibrating conveyor. - Item ID-11667 - Michelle 800.315.9950 x606Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-

hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 - Michelle 800.315.9950 x606

CHOP SAWSBlock saw - This well-guarded block saw has a 4x6 capacity. Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable - Item ID-11838 - Daren 800.315.9950 x603

COMPLETE SAWMILLSHMC MM10 Right hand 4 block modular mill-- - 2-saw vertical edger and 150 HP motor and starter. Carriage is all air powered. Needs a log turner, the carriage is 17’ 8” total


www.blackstonebeaver.com

Firewood ProcessorsI lackstoneeaver

P: (508) 478-5902 123 Uxbridge RoadF: (508) 321-9876 Mendon, MA 01756

I lackstoneeaver

Operator comfort in enclosed cab•

Dual joystick controls ease hand •

fatigueComfortable, adjustable seat•

Joystick controls•

Engine controls inside cab•

The Blackstone Beaver Components

The Blackstone Beaver Firewood Processor is built in the USA with industry standard components. Hydraulic systems built with high quality Parker hoses and hose ends.

SizeMaximum log length is 25’ with a 24’ diameter. Cut length is adjustable up to 24” long. Splitting head can be adjusted by up to 10” for consistent splits on various log diameters.

CustomizationBlackstone Beavers are customizable by the manufacturer. Integrate your ideas into a production machine built to match your requirements! Don’t need a mobile unit, specify a skid mount.

SpeedThe processor comes standard with a 3-stage hydraulic pump. All strokes are performed in high speed by default, but if greater splitting force is needed, pressure will immediately be increased. When load is decreased, the high speed stroke will renew.

TMT Chipping EdgerSchurman 6TA48 CombinationUkiah 6” x 48” Gang EdgerSchurman 12” Double Arbor Gang

FILING ROOM EQUIPMENTVollmer Cana E (8)Wright Mod. 1801 (3) Weinig R 934 Profile GrinderErma 71” Mag Bed GrinderNewman G-200 GrindersHanchett Knife Grinders (10)Wright W-1600 Auto TipperWright W-150 MSM Top & FaceArmstrong No. 90 EqualizerArmstrong Dual Side GrinderArmstrong Side ProNewman G-20 Rotary Armstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleHanchett DN-40 Knife GrinderArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 B.S. Stretcher Roll

HOGS & PULVERIZERSJeffrey 36 x 60 ShredderJacobson Horizontal HogZeno Low-Noise GrinderWest Salem Big Brute GrinderJacobson Hammer MillW. Salem 52” Horizontal GrinderJeffrey 56 WB Hammer HogLamb HX 750 Hammer Hog Kimwood Rotary HogJeffrey 76WBH Horiz. HogGruendler 50XE Hammer Hog

MISCELLANEOUSDog Ear MachineSmith Twin Horizontal ResawGlobe Strip SawMorbark Stac Trac, NEWMereen Johnson 424DC RipsawIndustrial 3496 Finger JointerIndustrial FJS-25 Finger J. SystemHurricane 28” Chop SawFruilmac End Matcher

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:www.machinerysales.com

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

WE ARE PARTING OUT

WORLD’S LARGEST INVENTORYNew & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSSalem 6’ Air Strain BandmillKockums 6’ QuadMaxi Mill with 6’ QuadSalem 7’ RH BandmillSalem 5’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air Strain

CARRIAGES & DRIVESSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear CarriageUSNR 2000, 42" Stud CarriageSalem 60” 4-Block CarriageSalem 42” 4-Block Carriage

CHIPPERS & SCREENSBM&M 5’X14’ ScreenRotex 6’X16’ ScreenPrecision 58” Horizontal FeedWest Salem 58" Horizontal FeedPrecision 8X8 ScreenKockums 8X8 ScreenPrecision 66" Horizontal F.Precision 118” HFBD ChipperPrecision 96” Whole LogPrecision 48” Horizontal F.B.C. 6140 Slant DiscCM&E 36” Rechipper

DEBARKERSNicholson 35" A-2 DebarkerNicholson 22” A-5 DebarkerNicholson 44” A-2 Debarker

EDGERS & GANGSPendu Double Arbor GangSchurman Late 4” x 36” Shifting

(4) Peerless 24-Unit BinsPeerless Trailer DumperSamuels Plastic Strapper (1) 60-Unit Peerless BinL&M Log Cut-Off SawsTimesaver Sanders (6)Lumber Stackers (3)Irvington 20’ Trimmer, 1’ SawsMereen-Johnson 48” Ripsaw Sullair V-200TS Compressor5-Arm Hyd. Tilt HoistSticker Recovery SystemIrvington Planer Trimmers

PLANERS & MOULDERSWeinig Hydromat 23Weinig Powermat 2000Stetson-Ross Timber SizerWeinig Powermat 2000Mattison 226 12” MoulderMattison 228 16” MoulderDiehl 6-head TF MoulderBuss 55 Double SurfacerBuss 88 Double SurfacerWadkin 6-Head MoulderYates A-20 10-KnifeWeinig U22A, 6-headWadkin 7-Head MoulderNewman M-990H 20-KnifeNewman 382 Double SurfacerNewman M712 12-KnifeS-R 6-10-A1 10-KnifeCoastal 24” 20-knife PlanerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersWeiniig P22N 5-Head

RESAWSMcDonough 54” Twin Horizontal 36” Tri-State Tilting ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed ResawSalem 6’ Horiz. Air StrainKockums 6’ Horiz. Twin Air StrainMcDonough 62” Linebar Resaw


06 John Deere 650J - Closed cab with heat and air, new undercarriage, 85% on tracks, forestry package, new paint, showing 3,114 hrs. ................... $58,500

00 John Deere 650H - 6-way hydraulic blade, forestry package, undercarriage fair, new injector pump, showing 9,975 hrs. ....

............................................. $39,500

01 Timco 425D Feller Buncher - Rebuilt motor, 80% on tracks and undercarriage, 33 inch bar saw with laterial tilt head, showing 7,100 hrs. ............................... $105,000

96 John Deere 750C - D6 Berco under-carriage, 6-way hydraulic blade, forestry package, new track pads and paint, show-ing 8,127 hrs., in excellent shape $30,000

81 John Deere 850 - 12ft 6 way hydraulic blade, forestry package, 65% on tracks and undercarriage, showing 6,267 hrs. ............................................................... $14,000

88 John Deere 550G - 6-way hydraulic blade, forestry package, 70% on tracks and undercarriage, showing 7,185 hrs. ............................................................... $21,500

98 Husky Brute XL 175 with CRT Bucksaw - Cummings 6 BT, continous turn grapple, on a Pitts pintel hook trailer .. ..................................................................... $27,500

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988

‘78 Timberjack 225Item ID: 12031Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1987 CAT D4H TSKw/Winch and Forestry Package

Item ID: 12026Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

LATE 70’S 230 Timberjack ForwarderItem ID: 11993Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

1979 JD 440C Cable Skidder Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T

Item ID: 12091Contact: Tom 800.315.9950 Ext. 604www.LBXonline.com

length the 1 head is 2’6” from the end of the carriage to the center of the hea2005 Timberharvester Sawmill - Purchased new in December 2005, has 1550 hrs, powered by a 47-hp Lombardini diesel, log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run inside. - Item ID-11584 - Michelle 800.315.9950 x6062008 Mighty Mite Mark IVB Portable Sawmill - Bandsaw Sawmill. Perkins 37hp Diesel Motor. Hour Meter Reads: 49.5. S/N: B4B0637 with 2007 Mighty Mite Mark IVB 40’ Trailer, VIN: 1M9SB40237P538637 - Item ID-11996 - Michelle 800.315.9950 x60656” Circular Sawmill - Runs 8’ to 28’ long saws up to 36” wide. Is PTO powered, currently running off 80-hp tractor. - Item ID-10802 - Michelle 800.315.9950 x606Complete Circle Mill/top saw/resaw/edger/all transfers - Complete sawmill helle carriage with top-saw; infeed deck; edger; McDonough resaw; Cat Gen-set; all transfer equipment. Circle saws and related equipment. All electrical switches included in sale. Buyer is responsible for removal. - Item ID-11656 - Daren 800.315.9950 x603Complete Plywood Mill - sold - Item ID-10797 - Michelle 800.315.9950 x606Complete Select Sawmill - 6” double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hrs. Comes with 48 extra blades worth $10,000.00. Also includes a debarker with 840 hrs. Both purchased new by current owner. Price new without the extra blades is $160,000 - Item ID-10782 -

Michelle 800.315.9950 x606Comptete Operating Sawmill - 1-HMC 30 ft. 4-Strand Log Deck with stop and loader. 2-HMC V2110 Slant Track Debarker - 24 ft. capacity Cornell Bark Conveyor – 40 ft.Debarker control cab 3-40 ft Hour Glass Rollcase. 4-30 ft. Heavy Duty Log Deck with stop and loader.HMC log turner (chain) up and down. 5-Lane Tech Heavy Duty 536 4-Head Block Carriage. 5 axles with 12” wheels.3 Cant turners. 6-Heavy Duty Modular Track System capable of sawing 24 ft. 7-Head Rig-48” main saw with 150 Hp-36” top saw with 75 HP-Off bearer belt-Over-sized booth with o heat and air-Silver Tech set works.8. 75 HP Hydro Static feed for carriage with cooler. 9. Mellot 24 ft retractable Roll Case with 8” spiral rolls and 2 pop up transfer rolls. 10. Mellot 24 ft Roll Case with 8” smooth rolls. 11. Mellot 8 ft. 4-Strand Transfer Deck to Edger with stop. 12. Lane Tech combination Edger Resaw with 75 HP motor.2 – 18” blades, center split with Silver Tech setworks. Infeed table- Cant transfer chains to resaw. 2 Carter laser site lines. 13. Lane Tech Resaw 42” circle saw. Line Bar with Manual set work from 0.5” to 8”. 2 side arm rolls plus top back rolls – all powered. 14. Mellot 20 ft. Self-tailing Out Feed Belt. 15. Mellot 20 ft. Split Out Feed with 8” rolls and pop up stop. Merry go around. 16. Mellot 4-Strand with square lugs. 17. Mellot 22 ft. Belt Conveyor. 18. Mellot 4-Strand 14ft (roof top chain) Deck with Hyd. stops. 19. Cornell 2-24” saws – auto Set works from 4ft. to 20 ft. in 1 ft. increments. 20. Mellot 40 ft. 4-Strand Lumber Deck. 21. 2-Strand Lumber Deck 24 ft. 22. 100 gal Hyd Pump Tank with solenoids for deck functions. 23. Dayton 10HP Air Compressor, 3 Phase. 24. Emglo 5 HP 230 Volt, 1 Phase. 25. Cat Generator – 3412 Engine, 550 KW – Serial # 81Z23731. 26. 48” 3-Knife Morbark Chippac with 15 HP Trailer Loading Blower. 27. Mellot 24 ft. Vibrating Conveyor. 28. Webster 50 ft. 8” sides Vibrating Conveyor with Saw Dust Section.

29. Rens Metal Detector in Webster Vibrating Conveyor. 30. Saw Laser Lite for Head. 31. Misc Blades and Parts for various machines. 32. Electrical panels. 33. Saw Motors. More pictures available upon request. Thanks for looking. Out put 35,000 bf in one 8 hour shift. - Item ID-11774 - Daren 800.315.9950 x603

Jackson Harvester Sawmill - 3 headblock carriage, 2 saw vertical edger, Mudata setworks, log turner, sawcab, almost new feedworks!!!! 2 strand live deck, Husk, newer sawcab outfeed belt. Can be bought as package or individual pieces! Can be seen running. Right handed. - Item ID-11313 - Daren 800.315.9950


!"#$%&'()&*#(+(,-"./*01

2--&3(+(45&/65&%

70/"38&*5.(9:"*;#%08

<=>?,7@A(B<>)7?@C

?@!7@9(?@!D(B<>)7?@!"#$%&'()%*+,(-.*%#"&./%&0.1'(2343563*(7+,(.+(89:99.5(+%(;,<*$0.1'(2343563*(=+,(.+(8>:99?5

?@!7@9(?@!D(B<>)7?@@.$(A3B.$'()3C.0.23+."#$(-%5"&B(D%%&E

4<A9(EF2BD(?@C7)9(B<>)7?@F%<$+%&'(;3G.$23+."#$(-%5"&B(D%%&E

>5..(GHIIJ(KLIFHMEN(-&(O*3*8(<3(?0.*0%(58

666P>Q5&.%38-0B"R8*-03PR-#

ONSITE AUCTION WITH SIMULTANEOUS WEBCAST

LOCATION:

DATE AND TIME:

PREVIEW INSPECTION:

FEATURED EQUIPMENT:Building Materials, Truss Joist, Moulding & Casing, Sheeting, 2x4, 2x6, 2x10 Lumber; Door Manufacturing Equipment, Routers, Table Saws, Air Compressors, I-Joist Machines, Mitre & Dbl Mitre Saws, Radial Arm Saws; Huge Inventory of Doors, Interior & Exterior Door Slabs & Prehung Doors, Hardware Inventory, Steel Doors, Bifold Doors, Door Glass Inserts

Call (877) 357-8124 or View Catalog Online at www.CharlestonAuctions.com

Huge Qty. of Door Manf Equipment

Hundreds of Hollow Core Door Slabs

Large Quantities of Steel Building Materials

HUGE AUCTION IN HOUSTON1992 Bell Super TItem ID: 11898Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

1984 John Deere 640D Cable SkidderNEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works

well; Runs good. VIN #: 640DC513656 NCItem ID: 12092Contact: Tom Ph: 800-315-9950 x604www.LBXonline.comx603

Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800.315.9950 x606Sawmill With Chipper - Carthage carriage, helle sawmill and chipper - Item ID-11992 - Michelle 800.315.9950 x606

CONVEYORSHurst Conveyor - Heavy duty material handling conveyor. Manufactured in 1994. Catwalk. Cleated 4’ wide belt. 100’ overall length. - Item ID-10821 - Michelle 800.315.9950 x606Webster Vibrating Conveyor - 90’ Webster Virbrating conveyor one

drive section one fiberglass section 12” botom - Item ID-11760 - Michelle 800.315.9950 x606

DEBARKERSMellott Debarker with 648 Rosser Head - Late 90’s. either 1997 or 1998. 20’ 3 strand log deck stop and load with Mellot 40’ log trough. Dual kickers and Cornell barn sweep. - Item ID-11668 - Michelle 800.315.9950 x606Precision 636 Debarker - Flat track debarker with Mellott 20’ deck. - Item ID-11683 - Michelle 800.315.9950 x606

EDGERS & GANGS6” Edger - Edminston hydraulic edger. Early 2000. with electric motor. Has a 40-hp, 60 hz. - Item ID-10864 - Michelle 800.315.9950 x606Meadows 7” X 48” Combination edger - Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic

roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’ - Item ID-11733 - Michelle 800.315.9950 x606Meadows Deluxe Edger - 4”x36”. Very little use, in very good condition. Has a pulley system to run it. 3 interchangeable blades. - Item ID-10900 - Michelle 800.315.9950 x606Miner Edger - 40 HP Electric motor, 4” x 32” capacity, up to (4) blades, 7’ Infeed, 8’ outfeed - Item ID-10789 - Tom 800.315.9950 x604Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Michelle 800.315.9950 x606Salem 3-Saw Edger - 60-hp motor, 4” X 48” capacity, 9’ infeed table, 17’ long picker outfeed table, hydraulic blade shift. 1990 model - Item ID-10852 - Michelle 800.315.9950 x606

Schurman 4” Top arbor edger - “Super Heavy Duty” would be an understated description of this machine. It features 50 HP on the arbor and a separate motor for the feed. There are 3 air shifting carbide saws in the 23” wide feed throat. 6 bottom and two top feed rolls. All powered. The top rolls have air lifts. All feed rolls as well as the saw portion of the arbor are chrome plated. A very well engineered, heavily built machine. - Item ID-11763 - Daren 800.315.9950 x603Timberking Talon 900 Edger - Powered by 220 volt, 3 phase electric, 15-hp motor. Has a 21” opening. Been used and stored inside a warehouse and never exposed to the elements. - Item ID-11560 - Michelle 800.315.9950 x606Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor. Good looking edger. - Item ID-11781 - Daren 800.315.9950 x603


!"#

James G. Murphy Inc.Commercial & Industrial Auctioneers

18226 68th Ave NE, Kenmore, WA 980281.800.426.3008 - 425.486.1246

murphyauction.com

PUBLIC AUCTION!"#$%&'!$()"*'!$(+*",#-$!

!"#$%&&'()*%+$,-./'0,"&'(1.".,

2345'6'7(89(!84:'6';49<40:'2=!"#$%#&'()*+',-#./01+'203-0"1'4(

>?@@'7'A&B'C#D'EE/'41F'GHIJ/'4K5-67%83'78'9#':#;/'<==.%7#')'>?-%@A#37'B8;/'C%0'B;%/#

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`"A07%83W''

]%/';%$#'8"'9%/'83;%3#'&%7U'MurphyLIVE!'4Qa']-1#".'!"#A%-A

K5II'T<G'5b'LIIOB,G5,>F']G<K:OG>

9A'5L9L5<5!''M''9A'0(!(0N(!O

1989 CAT D5H TSKItem ID: 12029Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1991 TIMBERJACK 450BItem ID: 12036Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

1988 Mack RW713 Day Cab Log TruckItem ID: 12000Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

FIREWOOD PROCESSORS2005 2040xp2 + 30’ Conveyor - 2005 2040xp2 firewood processor, 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hrs 5th strand live deck arm for processing blocks as short as 24” (normally a $2,000 option), Very Well Maintained Heated Operator Cabin, Pilot Electric/Hydraulic Joysticks Safety Seat, Clean Out Pan Option

(normally $1,000 option - Item ID-11871 - Daren 800.315.9950 x6032005 Built-Rite model 50 SCP processor - Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel - Item ID-11619 - Daren 800.315.9950 x6032005 Cord King Firewood Proccessor - 900 hrs, with 30 ft. conveyor - Item ID-12027 - Daren 800.315.9950 x6032006 MULTITEK 2020CSC - One owner, ‘06 Multitek 2020CSC firewood processor with a 2.4 L 66hp John Deere Engine, with 2000 hrs, unit is an all in one including loading deck and conveyor, heated

cab, and lights, 3/4” pinch saw chain, conveyor extension for loading semi-trailers. - Item ID-11900 - Daren 800.315.9950 x6032006 Timber Wolf Firewood Processor with 26’ conveyor - 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren 800.315.9950 x6032007Hakki Pete 1x37 EZ - 6 hrs, Auto Feed. 4 Way Splitter. Loading Conveyor - Item ID-11865 - Daren 800.315.9950 x6032008 Wood Beaver Hakki 1x37 Firewood Processor - 2008. powered by a 24-hp Honda gas engine. Includes a log deck. Less than 100 hrs. - Item ID-11659 - Michelle 800.315.9950 x606

Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800.315.9950 x604Empire Firewood Processor (now is Cord King) - 2002 Empire firewood processor with low hrs. 42” circle saw, 3 strand live deck that accepts log that are 25’ long and 22” in diameter. Powered by an 80-hp Cummins diesel. Less than 400 hrs. 30’ conveyor is included.


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save

Your

Stubs &

Pieces!➨

Our newest color—Light Blue

1990 Ford A64 Wheel LoaderItem ID: 12032Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1997 Morbark 1200 Tub GrinderItem ID: 12035Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

1992 John Deere 644E Wheel LoaderItem ID: 12034Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

1998 Cargo Walking Trailer45 ft. x 102 in.Item ID: 11998Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

Has tandem axle, pintle hitch and produces 4 cords per hour. Ready to tow home and get to work. - Item ID-11980 - Michelle 800.315.9950 x606HAKKI PETE 1X37 Firewood Processor - Manual Set-Up, 4 & 6 Way Wedge, 3 Extra Bars, 6 Extra Chains, Converted to Rim Sprocket, Hydraulic Log Lift, Serial #4702-5 includes a John Deere 850 Power Unit - Item ID-11694 - Daren 800.315.9950 x603Simplex Chomper 14 - Chomper firewood processor , model simplex

14 , will handle logs up to 14 “ in diameter unlimited length . Can do one cord in approx 1 1/2 hrs with one man , cut split and ready to go . Uses a hydraulic shear instead of a saw so no sharpening , can split two or four ways. In Maine - Item ID-11707 - Michelle 800.315.9950 x606TIMBERWOLF Pro-HD XL Inline Firewood Processor - 80hp John Deere, Auto cycle, 8 way wedge, 16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hrs. Also includes a partial factory warranty - Item ID-12013 - Michelle

800.315.9950 x606FORKLIFTS

1995 Nissan Forklift - 15,500 lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID-11892 - Michelle 800.315.9950 x6062000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 - Michelle 800.315.9950 x6062004 Moffett Model M5500 Truck

Mounted Forklift - 1418 Hrs; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800.315.9950 x6044500 Masse Ferguson Forklift - Powered by a 3-cylinder Perkins diesel engine (completely rebuilt). Almost new tires, 4’ forks, lift is 10’ high and has a 2 stage mast. Is hydro-static. - Item ID-10768 - Michelle 800.315.9950 x606Case 586C Forklift - Forklift with

SAVE BIG ON USED & REFURBISHED EQUIPMENT

‘08 Bandit Model 3590Cummins 700-HP. HP600 Twin Disc Clutch. Reversing Fan. Babitted Knives.

$340,000.00

GREAT BUY! ‘06 Bandit Model 4090CAT 1000-HP. Prentice Loader. Deluxe Operator’s Cab.

Refurbished. New Paint Job.

$440,000.00

‘07 Bandit Model 2090John Deere 325-HP Hydraulic SwivelAuto Feed.

$89,995.00

Email: [email protected]

Online: http://www.banditchippers.com

1-800-952-0178

OUR BIOMASS CHIPPERS TAKE YOU FROM FOREST TO FUEL.

‘03 Beast Model 3680CAT 565-HP. Radio Remote. Magnetic head pulley.

$240,000.00

For fuel wood production, nothing is built stronger and lasts longer than a Bandit whole tree chipper. Our unique machines quickly and effi ciently convert whole trees into dimensional chips. Now featuring eight high-powered machines to maximize productivity.

‘06 Beast Model 3680CAT 700-HP. Reversing Fan. Fifth Wheel Hitch.

$295,000.00

LumbermansExchange-1110.indd 1 10/21/10 10:05:28 AM

SAVE BIG ON USED & REFURBISHED EQUIPMENT

‘08 Bandit Model 3590Cummins 700-HP. HP600 Twin Disc Clutch. Reversing Fan. Babitted Knives.

$340,000.00

GREAT BUY! ‘06 Bandit Model 4090CAT 1000-HP. Prentice Loader. Deluxe Operator’s Cab.

Refurbished. New Paint Job.

$440,000.00

‘07 Bandit Model 2090John Deere 325-HP Hydraulic SwivelAuto Feed.

$89,995.00

Email: [email protected]

Online: http://www.banditchippers.com

1-800-952-0178

OUR BIOMASS CHIPPERS TAKE YOU FROM FOREST TO FUEL.

‘03 Beast Model 3680CAT 565-HP. Radio Remote. Magnetic head pulley.

$240,000.00

For fuel wood production, nothing is built stronger and lasts longer than a Bandit whole tree chipper. Our unique machines quickly and effi ciently convert whole trees into dimensional chips. Now featuring eight high-powered machines to maximize productivity.

‘06 Beast Model 3680CAT 700-HP. Reversing Fan. Fifth Wheel Hitch.

$295,000.00

LumbermansExchange-1110.indd 1 10/21/10 10:05:28 AM


A Powerful High Production Circle Saw Processor —WITHOUT THE HIGH PRICE TAG!

Simple Controls &Push Button Splitting

Circular Saw Saveson Maintenance

50 BHP CAT Power —STANDARD!

Introducing the All New Rapido Loco Junior

Designed to Work —

NOT TO BE WORKED ON!

THE RAPIDO LOCO JUNIOR FEATURES:

These Features — ALL STANDARD! — Not Expensive Upgrades!

Giving You More For Less Is The Woodbine Way.Call 888-667-8580 now to learn more!

The All New Rapido Loco Juniorat the Low Introductory Price of

ONLY $42,900Until April 1st, 2011

Coming Soon!Woodbine Pro 20 Chainsaw

& Loco 20 Circle BladeCall Now

for Specs & More Info.

17 Hyde Hill Road, Williamsburg, MA 01096www.crdmetalworks.comEmail: [email protected]

Performance, Power & Pro tFirewood Processors

Visit our website

1988 Clark 666 Grapple SkidderHours unavailable, 30.5 tires-front at 40%, rear at 20%. Runs good. Single arch grapple. Good back up skidder. Great price.Item ID: 12088Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

1995 Simonds Automatic Bandsaw LevelerExcellent Condition. Will improve cutting accu-racy, filing room safety,

saw life, leveling qual-ity and filing room pro-ductivity. The paybacks from automatic leveling - less deviation, kerf re-ductions, and simplified

saw maintenance. Great value and a smart in-vestment!Item ID: ?Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

good rubber, good brakes and runs good. Has side shift. 1982. Case 4-cylinder. ITEM IS SOLD!!!! - Item ID-11457 - Michelle 800.315.9950 x606Hyster Forklift - 2WD, LPG, Pneumatic Tires, Est 8000LB Capacity, Sideshift, ROP, Hrs Shown As 3451. - Item ID-12002 - Michelle 800.315.9950 x606

GENERATORS350 KVA Cummins - Genset with

9000 hrs. - Item ID-11994 - Michelle 800.315.9950 x60675KW Diesel Turbo Generator - 770 hrs on it. w/ a hercules Deisel Engine & right now it’s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! - Item ID-10491 - Tom 800.315.9950 x604

HOGS/WOODGRINDERS50IN Capacity Wood Hog with Conveyor - 50 Capacity Wood Hog, Equipped with 90’ Vibratory Conveyor and 40’ Belt Conveyor, Transformer Included - Item ID-12018 - Michelle 800.315.9950 x606

KNIFE GRINDERSHanchett Band Sharpener - Sharpener with stretcher and shaver - Item ID-11601 - Michelle 800.315.9950 x606Hanchett Circular saw grinder - This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Michelle 800.315.9950 x606Schneider Pattern Knife Grinder - Item ID-11743 - Michelle 800.315.9950 x606

LOG BOOM CRANES1984 BARKO 80BC - Log loader, includes the International truck, sn#15298 - Item ID-11428 - Daren 800.315.9950 x603

LOG TURNERS2 Strand Deck - 16’ long. 70” c to c 2-strand deck. Elecric Drive. Has front side singulator. - Item ID-11782 - Daren 800.315.9950 x603Log deck headframe with Mellott chain turner. - Deck is intended for

a RH mill. Chain spacing as viewed from carriage Right to Left: 0”-60”-118”. Turner is at 45”. Stop & Loader and deck drive shaft are 2-7/16”. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132” Width-77” height-64”. Sprockets are 1” wide at tooth area. 12 tooth. 2-5/8” spacing. Would work for H-78 chain. - Item ID-11778 - Daren 800.315.9950 x603Mellot log turner & Hydraulic system - The Mellot Log Turner Comes With With Joystick Control Valve And Hydraulic System. - Item ID-11752 - Daren 800.315.9950 x603

LOGGING EQUIPMENT1969 Fiat Allis articulating loader - 1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise - Item ID-11437 - Daren 800.315.9950 x6031974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple - Item ID-11979 - Daren 800.315.9950 x6031978 CAT 518 Grapple Skidder - 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight - Item ID-11800 - Daren 800.315.9950 x6031978 TIMBERJACK 225, DETROIT POWER-MANUAL SHIFT, Tires are 50%, Due to age of machine ares are unknown - Item ID-12031 - Daren 800.315.9950 x6031979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab


When You Buy Your Circular Saws From B.H. Payne

You’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth

Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also

Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels,

Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

1998 Prentice 310EItem ID: 12033Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

‘92 Ford L8000 w/1996 Series XL235E LX235E Log LoaderItem ID: 12025Contact: Daren 800.315.9950 Ext. 603www.LBXonline.com

1997 CAT D5H TSKIIItem ID: 12012Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2007 Cooks Portable Sawmillw/Portable Edger

Item ID: 12016Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800.315.9950 x6041980 DEERE 540B Grapple skidder, Swinging Grapple, winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. - Item ID-12010 - Daren 800.315.9950 x6031981 (est) Clark 666 Cable Skidder - Unknown hrs; Many recent improvements - New 6BT8.3 Cummins with 1500 hrs; New Service Brake; New Parking Brake; 23.1 x 26 tires at 50%; Runs good; Very strong power train. - Item ID-12054 - Tom 800.315.9950 x6041982 540B Grapple Skidder, New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon - Item ID-11569 - Daren 800.315.9950 x6031984 DEERE 540B cable skidder, New 23x126 tires on rear. 8000 hrs - Item ID-11875 - Daren 800.315.9950 x6031984 DEERE 540B - cable skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% - Item ID-11566 - Daren 800.315.9950

x6031984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800.315.9950 x6041985 Treefarmer C6E Grapple - Grapple, winch, complete overhaul 500 hrs ago, 453 Detroit, powershift transmission, 28x26 tires are 50%, rebuilt grapple and arm cylinders, all worn hoses replaced. Winch needs shaft. - Item ID-11296 - Daren 800.315.9950 x6031987 FORD L9000 - TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c - Item ID-11844 - Daren 800.315.9950 x6031988 Clark 666 Grapple Skidder - Hrs unavailable, 30.5 tires-front at 40%, rear at 20%. Runs good. Single arch grapple - Item ID-12088 - Tom 800.315.9950 x6041988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good - Item ID-11432 - Daren 800.315.9950 x6031988 FORD L9000 - 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader - Item ID-11846 - Daren 800.315.9950 x603


1996 511EX Hydro-Axw/Bunching Saw HeadApprox. 6800 hrs. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. Good price on strong machine.

Item ID: 12072Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2001 Fastline Gator 128 Band ResawItem ID: 12023Contact: Michelle 800.315.9950 Ext. 606

www.LBXonline.com

Mereen-Johnson 431-DC Gang Rip Saw w/ LaserItem ID: 12019Contact: Michelle 800.315.9950 Ext. 606www.LBXonline.com

2005 CAT 525B Grapple SkidderItem ID: 12028Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

‘00 Daewoow/Denharco DM3500 Stroke Delimber

Item ID: 12026Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2001 CAT D5H TSK II Grapple & WinchItem ID: 12083Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1988 GMC Topkick Log Truck - With Prentice loader. 3208 Cat diesel, air brakes and runs good. - Item ID-10920 - Michelle 800.315.9950 x6061989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 - Daren 800.315.9950 x6031990 FORD A64 Wheel Loader with forks, - Item ID-12032 - Daren 800.315.9950 x6031991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new

guages were installed. New hinge pins and steering pins installed. All filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 - Michelle 800.315.9950 x6061991 Hydro Ax 221 hour meter broken good tread good running condition includes bush hog attachment - Item ID-11769 - Michelle 800.315.9950 x6061991 Hydro Ax 221 John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab

with heat and air - Item ID-11770 - Michelle 800.315.9950 x6061991 Timberjack 450B - SN:CI-2759, Hour Meter Reads 4652.5, Cumings Diesel, 7’ Blade, Winch, Grapple - Item ID-12036 - Michelle 800.315.9950 x6061992 Ford L8000 with a 1996 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, - Item ID-12025 - Daren 800.315.9950

x6031992 GMC Truck with 1996 HM38 Production Drill - 29’ Drill Depth – Less than 200 hrs since replacement of Bar & Barrell; 3” Kelly Bar; Funk 12,000 transmission – Less than 50 hrs since rebuilt; Ford CSG 300 gasoline Engine; Rebuilt V-70 valve; Less than 100 hrs; Rebuilt Hydraulic Pump Less than 100 hrs; Reinforced Table; Mechanical drive & Hydraulic bar; 18” Ring Gear Torques to 42,000 ft. lbs; Swing Base; Mounted on Tandem Axle Carrier; Auger Capacity up to 72” intermittent or 54” Constant; Carrier-1992 GMC/Volvo Diesel Tandem Axle Truck – less than 200,000 mi. - Item ID-12056 - Tom 800.315.9950 x6041992 John Deere 644E Wheel Loader - 7’ Bucket, 4x4, Enclosed Cab, Hour Meter Reads: 12,344, SN: DW644EB537757 is in Nevada - Item ID-12034 - Michelle 800.315.9950 x6061992 Prentice 180D Log Loader with Cummins engine mounted on Pitts Trailer. Good condition with 7,700 hrs - Item ID-11434 - Daren 800.315.9950 x6031993 FREIGHTLINER FLD12064ST, detroit 60 series engine, 425 hp, 18spd transmission, 4.10 gear ratio,


2004 Deere 648G IIIItem ID: 12030Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1996 Timbco 445-C w/22” Quadco Hot SawWell maintained. Quadco saw head. Good condition. Runs good. Great price!Item ID: 12037Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1997 Bell Ultra C Feller BuncherKoehring 18” Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition. Great for thinning and very stingy on fuel. Plus, this machine is easy to transport behind a one-ton pickup. Smart way to cut when on a tight budget.Item ID: 12050Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Shaving MillItem ID: 11975Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

Barko 80 LOADER, Reman TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking Rears. Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives - Item ID-11641 - Daren 800.315.9950 x6031993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. - Item ID-11582 - Michelle 800.315.9950 x6061993 Timberjack 380 C Skidder - 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. - Item ID-11534 - Daren 800.315.9950 x6031994 Cat 518C Skidder - The engine

was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 - Michelle 800.315.9950 x6061994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 - Michelle 800.315.9950 x6061994 Hydro-Ax 611E Feller Buncher - Flotation tires at 75%, good overall condition. Works daily, 24” ax head, new injection pump, exceptionally clean operators station. - Item ID-11302 - Daren 800.315.9950 x6031994 John Deere 640E Cable Skidder

- Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID-11653 - Michelle 800.315.9950 x6061994 Komatsu WA-180 - Diesel, forks (no bucket), A/C, new belts, ejection pump redone, hydraulic pump


For Firewood Production - Take Your Pick

*Production rate may vary based upon log size, quality, power source used and operator skill.

The DYNA SC-14 OR SC-16

Packed and ready to go!

12 Years of Building Quality Machines!

toll free: 1.888.820.3962local: 231.734.4433fax: 231.734.36816228 60th Avenue, Evart, MI 49631

Both Give you High Production in an

Affordable and Profitable Processor The SC-14 (pictured) Offers

DYNA Portable Sawmills

Shell Forest Products, Harrodsburg, KY Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN Warrick Hallet 320.864.4340

PDG Sales, Medina, NY Philip Graber 585.798.2969 SC-16 Demo Model Available

North Country Hydraulics, Potsdam, NY Ben Deschaine 315.842.0388

Riehl’s Sawmill Sales, Lykens, PA Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV Bill Mollard 304.940.0749

Call the Dealer Nearest You!


FAX TO:

[email protected]

EXPERTLY BUILT AND SOLD by a company you can depend on!

Fulghum 66” ChipperBaker AX 12” Resaw

250 HP WEG SoftstarterDiehl Straight Line RipsawJocar Linebar ResawNewman S382 Dbl Surface Planer

Mereen Johnson 424 Slat Bed Gang RipsawUSNR Edger Infeed

redone, differential rebuilt, center pin replaced, solid tires, runs good, good appearance. In Pennsylvania. - Item ID-11394 - Daren 800.315.9950 x6031994 Prentice 210D - Grapple built for scrap iron, straight machine, joystick controls, radio works. Nice machine. 9600 hrs. - Item ID-11301 - Daren 800.315.9950 x6031995 Franklin 4000 w/Roto Saw - Includes a 1995 Roto Saw, 4 BT Cummins, Heat and Stereo. Runs

and looks great. - Item ID-11662 - Michelle 800.315.9950 x6061995 Hydro-Ax 411E, 7236 hrs, 18” Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat - Item ID-11673 - Daren 800.315.9950 x6031995 International 4700 Grapple Truck - 14’ Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 - Michelle 800.315.9950 x6061995 International 9300 Log Truck

- Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID-11502 - Michelle 800.315.9950 x6061995 MORBARK 1250, Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter

Replaced: 634. - Item ID-11704 - Daren 800.315.9950 x6031995 Tigercat Model 720 FB w/5000 Bunching Head - 5638 Hrs; Cummins 190HP; Tires: 28LX26; 2@80%; 2@30%; Paint - Fair; Body - Good; Glass - Fair; Cutting Disc Good. Runs good. Excellent value. - Item ID-12051 - Tom 800.315.9950 x6041996 511EX Hydro-Ax With Bunching Saw Head - Hrs est at 6800. Only 200 hrs on factory reconditioned hydraulic motors and pumps.

We know wood.We know wood.We know wood.[ It’s what we do. ][ It’s what we do. ][ It’s what we do. ]

!""#$$%#"&!'((()**+,-./0#1*,((((

Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


99 John Deere 648 GII Grapple Skidder - Cummings 6BT motor, single function grapple, decent tires, approx. 9,900 hrs. ...................................................... $35,000

98 John Deere 640 GII Cable Skidder - Cummings 6BT motor, new front tires and decent rear tires, approx. 9,500 hrs. ............................................................... $35,000

88 John Deere 640D Cable Skidder - Fair condition, 17,456 hrs. .................................................... $15,000

FMC Track Skidder - 653 Detriot motor, automatic Transmission ................................................... $10,500

FEC Flat Deck Bucksaw 3-line hookup ............... $3,000

CRT 42 Flat Deck Bucksaw 3-line hookup .......... $3,000

07 John Deere 450J - Closed cab with heat and air, 6-way hydraulic blade, Full forestry package, 60% on Track and un-dercarriage, showing 3,174 hrs . $42,500

96 John Deere 550G - 6-way hydraulic blade, lever steer, 50% on tracks, 70% on undercarriage, new paint, forestry package, showing 11,279 hrs. ......................... ..$25,000

89 John Deere 550G - 6-way hydraulic blade, limb risers and screened in cab, 80% on undercarriage, new tracks and paint, showing 6,442 hrs. ...................... .....$19,000

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988

2001 Husky XL 235 on Mack TruckLever Controls; runs good. Good back-up loader. Excellent price!Item ID: 12066Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2002 John Deere 230C LC Excavator w/ThumbCurrently working; Only 5200 Hrs; Cab w/ heat and A/C - Works, Glass good; minor dents all around but works good; New chains and sprockets about 300 hrs. ago.Item ID: 12097Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

Morbark 58 ChipperItem ID: 12082Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Serco 8500 Log LoaderItem ID: 12007Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800.315.9950 x6041996 BARKO 275B, 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 - Daren 800.315.9950 x6031996 Bobcat 773 skidsteer loader with bucket and flotation tires $10,000 - Item ID-11839 - Michelle 800.315.9950 x6061996 Cat 515 Grapple Skidder - John Deere winch, tires are 60%, 4 bearpaw chains, - Item ID-11305 - Daren 800.315.9950 x6031996 Caterpillar D5H - 140-hp 10’6” 6-way blade. New undercarriage, very clean. - Item ID-11306 - Daren 800.315.9950 x6031996 Freightliner 120c, knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. - Item ID-11435 - Daren 800.315.9950 x6031996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity. Truck runs well. - Item ID-11101 - Michelle 800.315.9950 x6061996 Morbark 2400 Chipper - Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID-11879 - Daren 800.315.9950 x6031996 Timbco 445B Leveling Feller Buncher - Quadco 22’ Hot Saw: Hour meter shows 6700 hrs, but owner says meter was changed. Est. hrs are 13,000. Runs good. Detailed maintenance history available. Motivated Seller. - Item ID-12075 -

Tom 800.315.9950 x6041996 Timbco 445-B w/ 22” Quadco Hot Saw - 40 degree tilt, Self- leveling, 4000 hrs on old meter, on new meter 6530 hrs, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter. May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails , pads and sprockets installed at 3400 hrs. Apr. 2006, New updated swing bearing and house tilt pins .bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007, New Cat track motor installed at 4550 hrs. Sept. 2007, 3500 hr. used swing box from Fraley installed at 4800 hrs. Jan 2008, All new track rollers on right side installed at 4950 hrs. Jan 2008, New saw head tilt flange installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept 2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs. Jan 2009, Boom cylinder resealed at 6020 hrs. Feb 2009 Shaft seals in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs. Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 - Item ID-12037 - Daren 800.315.9950 x6031996 TIMBERJACK 460, CAB, AIR, DUAL ARCH/YO, OVERALL CONDITION OF MACHINE IS GOOD, 5408 hrs - Item ID-11539 - Daren 800.315.9950 x6031996 TIMBERJACK 460 Grapple skidder - 10,850 hrs, 4wd, Cummins Engine, OROPS - Item ID-11695 - Daren 800.315.9950 x6031997 Bell Ultra C Feller Buncher - Koehring 18” Hot Saw; 5073 hrs; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition - Item ID-12050 - Tom 800.315.9950 x6041997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item ID-11857 -

Michelle 800.315.9950 x6061997 CATERPILLAR D5H TSK II - 6330 hrs, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL,50% Track Guards : Front/

Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800.315.9950 x6031997 Husky XL235 on Mack Truck


PIPER’SSaw Shop

800 • 845 •6075

Promotional Pricing OfferSimonds Red Streak Hard Back

1-1/4” x .042 x 3/4” or 7/8”Length 13’2”

$14.27 eachTell us you saw it here!

Limited

Time

Only

2005 CordKing Firewood ProcessorItem ID: 12027Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

CAT D4H TSK w/ Winch & Forestry Pkg.Item ID: 12024Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2004 Tigercat 630C Grapple Skidder12,295 hours but well maintained. Center section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NCItem ID: 12093Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

- Fair condition but runs good. Good back up loader. Standard lever controls. Clean for its’ age. Priced to sell. - Item ID-12066 - Tom 800.315.9950 x6041997 Morbark 1200 Tub Grinder - Hour Meter Reads 1021, 3412 Cat Diesel, Morlift 350 Grapple, Excellent machine for your grinding needs. $65000 - Item ID-12035 - Michelle 800.315.9950 x6061997 TIMBERJACK 460 Log Skidder - EROPS with A/C & Heat, Serial #962609, 7303 hrs - Item ID-11537 - Daren 800.315.9950 x6031998 Bell Ultra THP - Totally rebuilt, 7-1-08. engine,trans,drive motors, reconditioned a/c. New primeX 23x26 tires,new 3/4 rud multi-ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hrs. - Item ID-11679 - Daren 800.315.9950 x603

1998 Link-Belt 2800 - Runs and works good. 10,000 hrs. Fluids changed at 9,000 hrs. - Item ID-11650 - Michelle 800.315.9950 x6061998 Prentice 210E - mounted on trailer, joystick controls has the extra hydraulics to run a slasher or delimber but this loader has never had a delimber on it. installed new floor mat, had the seat recovered, changed all fluids and filters, resealed the joystick controls, and worked on the trailer landing gear - Item ID-11833 - Michelle 800.315.9950 x6061998 Prentice 210E - Loader has worked on small wood yard, level controls, John Deere engine, saw hook-up, good trailer - Item ID-11439 - Daren 800.315.9950 x6031998 PRENTICE 310E, Machine is ready to work, overall condition “GOOD” - Item ID-12033 - Daren

800.315.9950 x6031998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURING-TOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hrs - Item ID-11888 - Daren 800.315.9950 x6031998 Volvo truck w/160 Barco Log Loader - 1998 Volvo truck With a Volvo diesel engine, 5 speed transmission - Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great - Item ID-11436 - Daren 800.315.9950 x6031999 BELL TF120B Feller Bunchers, one owner machine, it is on D5 cat tracks, Hrs not known; meter not working. - Item ID-11480 - Daren 800.315.9950 x6031999 Cat D5C LGP w/ Mann rake new under carriage (20 hrs), 4000 original hrs, new Hystat system


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$13,907

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!Electric or Diesel, Manual or Automatic

Real Tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

‘98 John Deere 640 GII Grapple Skidder6 BT Cummings, new front tires, decent rear tires, approx. 9,500 hrs. .................... $35,000

(304) 872-2988

‘01 Husky XL 235 on Mack TruckLever Controls; runs good. Good back-up loader. Excellent price!Item ID: 12066Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Timberwolf Pro-HD XL Inline Firewood ProcessorItem ID: 12013Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

Sawmill with ChipperItem ID: 11992Contact: Michelle800.315.9950 Ext. 606www.LBXonline.com

rebuilt by Cat when under warranty at 3500 hrs, includes Mann rake, 6-way blade, OROPS, new paint and decals, very nice located in Michigan - Item ID-11822 - Michelle 800.315.9950 x6061999 TIMBERJACK 460 Grapple Skidder - Single Funct Grapple, 30.5 Tires, hrs 9999, Serial # : 995940 - Item ID-11696 - Daren 800.315.9950 x6032000 Daewoo with Denharco DM3500 stroke delimber - This is a bank repo an is open to offers - Item ID-12026 - Daren 800.315.9950 x6032000 TIMBERJACK 460 Skidder - 2000 TIMBERJACK 460, 30.5 ISD Tires, 6BTA Cummins, 120 Esco Grapple, 8900 hrs - Item ID-11538 - Daren 800.315.9950 x6032001 CAT D5H TSK II - 8,102 hrs, Cab with A/C, Six Way Blade, Fixed Esco 120” Grapple w/Winch, U/C 85%, rebuilt transmission - Item ID-12083 - Daren 800.315.9950 x6032001 ROTOCHOPPER MC166 - 3600 hrs, Cat 3406 460 hp, includes coloring attachment - Item ID-11692 - Daren 800.315.9950 x6032002 773G Bobcat - Has 3900 hrs and a Kubota diesel. - Item ID-11497 - Michelle 800.315.9950 x6062002 Case 90XT Skidloader - has 1950 hrs, 7’ bucket. - Item ID-11675 - Michelle 800.315.9950 x6062002 John Deere 230C LC Excavator with thumb - Currently working; Only 5200 HRS; CAB W/ HEAT AND AC - WORKS GLASS GOOD; MINOR DENTS ALL AROUND BUT WORKS GOOD; NEW CHAINS AND SPROCKETS ABOUT 300 HRS AGO - Item ID-12097 - Tom 800.315.9950 x6042003 Cat 247 Track Skidloader - New rear bogie wheels, hydraulic quick attach, vertical lift self leveling bucket. Machine has only 1100 hrs. Was well maintained and is ready to work. - Item ID-11348 - Daren 800.315.9950 x6032003 Cat 525B Grapple Skidder - S/N 3KZ00897, 10,496 Hrs, EROPS, ESCO Grapple w/ winch, 30.5 X 32 Tires 60%. Machine is in Tennessee - Item ID-11986 - Daren 800.315.9950 x6032003 Morgan 2 Saw Trimsaw - This machine was bought new and never

was really used, less than 50 hrs if that, machine has never been painted it wwas just not used. - Item ID-11904 - Daren 800.315.9950 x6032004 Barko 495MH Mounted on Trailer - 3280 hrs, Hydraulics for a self propelled carrier; Bar Slasher Hydraulics; Cummins engine; Rotobec 5052 grapple. Very good condition. Poor paint. Dry and tight. - Item ID-12065 - Tom 800.315.9950 x6042004 BARKO 495ML, 7068 hrs, heat and air works great, 6cyl Cat s/n#3539, Strong loader and is ready to work - Item ID-11905 - Daren 800.315.9950 x6032004 Bobcat S185 w/ high flow - 2004 Bobcat S185 skidsteer, turbo diesel, 56 HP, 1700 hrs, well-maintained skidsteer, everything is working. - Item ID-11840 - Michelle 800.315.9950 x6062004 Cat 287B - 2004. on tracks. 1390 hrs. Cab with A/C and hand controls. Tooth bucket. This is a one owner machine. - Item ID-11652 - Michelle 800.315.9950 x6062004 Cat 950GII Front End Loader - 950G currently has 18,111 hrs on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269. Equipped with GP bucket and having new 23” tires before sale. - Item ID-12100 - Tom 800.315.9950 x6042004 DEERE 648G III - 1420 hrs, 50% on tires, Pins are tight - Item ID-12030 - Daren 800.315.9950 x6032004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hrs - engine rebuilt at 7100 hrs; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller - Item ID-12067 - Tom 800.315.9950 x6042004 KOMATSU PC 200 LC7 Excavator w/Thumb - 2004; Only 3945 HRS; CAB W/ HEAT AND AC - WORKS; UC 60 %; SOLESBY THUMB; Very Clean and well maintained. Komatsu has highest resale value of all excavators. - Item ID-12096 - Tom 800.315.9950 x604

2004 Tigercat 630C Grapple Skidder - 12,295 hrs but well maintained. Center section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NC - Item ID-12093 - Tom 800.315.9950 x6042004 Valmet 425 Ex-10 Harvester - 4700 hrs: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 -

Tom 800.315.9950 x6042005 Bobcat S175 w/ grapple bucket - 945 hrs, always stored indoors, keyless entry, backlit status screen, new microfiber seat, high flow, includes grapple bucket, good tires, dealer maintained. - Item ID-11842 - Michelle 800.315.9950 x6062005 CAT 525B Grapple Skidder - 8100 hrs, EROPS w/ AC Single Arch w/ Grapple & Winch tires are 25% - Item ID-12028 - Daren 800.315.9950 x6032005 DEERE 748G III with Grapple


“Providing a full range of industrial metal detectors since 1965.”

MDI PROBE 2100PORTABLE INDUSTRIAL METAL DETECTORSIMPLE TO OPERATE – just turn on and go!MDI’S SUPERIOR DIGITAL TECHNOLOGY will detect an 8d nail buried 15" into a log!

• Pre-set for maximum sensitivity with adjustable sensitivity control

• Microprocessor controlled; eliminates mineral interference from logs or round for maximum detection depths

• Bright L.E.D. display indicates signal strength and battery level

• Touchpad control allows precision pinpointing of tramp metal

P.O. BOX 26440 • EUGENE, OREGON 97402PHONE: 541-345-7454 • FAX: 541-345-7971

www.metaldetectorsinc.com

2004 Valmet 425 EX-10 Harvester4700 hours; Valmet 360 Proc. Head. Fast and efficient measuring. In

woods or at the deck. Leveling machine for working steep grades. 35’ reach makes this a great thinning machine. Maximize your earning from every stem!

Item ID: 12074Contact: Tom 800.315.9950 Ext. 604www.LBXonline.com

2004 JD 648GIII Single Arch Grapple SkidderWell maintained; 8200 hours, engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller! (Tennessee)Item ID: 12067Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

and Winch - 5,654 hrs, NEW Center Section, 30.5x32 Tires, Tires ar 75% all around, This is a super nice Skidder and is working daily - Item ID-11976 - Daren 800.315.9950 x6032005 John Deere 550J - This has only 1981 hrs, has a cab with A/C, 24” pads, rear cab screens and front limb risers. The pins and bushings have been turned and the sprockets have been replaced. - Item ID-11661 - Michelle 800.315.9950 x6062005 Prentice 280 TMS Loader - Like new with less than 1000 hrs. Full package with loader, delimber,

slasher, and trailer! Less than half the price of new unit! Great value. - Item ID-12104 - Tom 800.315.9950 x6042005 Prentice Model 410E w/TMS Package - 2730 Hrs; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained. KY - Item ID-12079 - Tom 800.315.9950 x6042005 Rayco RC12 Chipper - John Deere engine with 500 hrs, ulsating down pressure, like new condition.

Machine is capble of chipping 12” wood. This machine is all but brand new. Has been kept in garage. - Item ID-11351 - Daren 800.315.9950 x6032005 Valmet 890.2 20 ton Forwarder - 10,450 hrs. Rear Bogeys recently sealed. 8 wheeled. Good condition and well maintained. Eco Tracks. Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Motivated Seller! - Item ID-12068 - Tom 800.315.9950 x6042006 Bandit 2680 Horizontal Grinder - Only 765 hrs; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5

tires. This machine is very clean in excellent condition. - Item ID-12048 - Tom 800.315.9950 x6042006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service. 9463 hrs. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 - Tom 800.315.9950 x6042006 Barko 495 Crawler Loader - 5008 hrs; Unit has 48” hydraulic cab riser that totally folds forward for legal height transport; Undercarriage is 90% with wide 36” pads. Equipped with both delimber and bar saw hydraulic package. 32’ reach and Rotobec 48” grapple. Excellent condition for yard machine or working at set. Priced to sell. - Item ID-12103 - Tom 800.315.9950 x604


EXPERTLY BUILT AND SOLD by a company you can depend on!

Our New Shaving MillsBig Production Affordable Price!

800-241-8983FAX 706-324-0047

Our New Shaving Mills Give You Big Production at an Affordable Price!

Financing Available

Expertly built and sold by a company you can depend on.

dynamically balanced

‘99 John Deere 648 GII Grapple Skidder6 BT Cummings, single function grapple, decent tires, approx. 9,900 hrs......................$35,000

(304) 872-2988

FMC Track Skidder653 Detroit motor, automatic Transmission .................... $10,500

(304) 872-2988

2006 Cat 420E Loader Backhoe - Comfort cab with AC/Stereo; Extend-a-hoe; 400 hrs; Aux hydraulics; 4 WHEEL DRIVE; 24” back hoe bucket - Item ID-12071 - Tom 800.315.9950 x6042006 Cat D6R Dozer with Semi-U Blade - 2821 Hrs; 24“ pads. 12’4“ Blade, Power tilt blade, Runs and operates good. Under carriage good, sprockets, rails, and pads good; Cab & Air; Cat C-9 Diesel Engine. - Item ID-12058 - Tom 800.315.9950 x6042006 Caterpillar 287B Track Skidloader - Hydraulic quick attach, vertical lift, self leveling 83” bucket, auxillary hydraulic. 600 hrs. - Item ID-11352 - Daren 800.315.9950 x6032006 Eco-Log 580B - 2700 hrs. Powered by a 250-hp Cat diesel engine. Logmax 7000b Harvesting head. Very motivated seller. - Item ID-11250 - Michelle 800.315.9950 x6062006 JD 700J Dozer with Winch - Very clean dozer with winch and low hrs of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look. NC - Item ID-12101 - Tom 800.315.9950 x6042006 JD 700J XLT Dozer - 1075 Hrs. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. - Item ID-12073 - Tom 800.315.9950 x6042006 NEW Fuchs 460 Log Loader -

44’ Reach. 212 Demo Hrs. Rotobec 5012 Grapple. Hydraulic raising cab for excellent operator visibility. Priced well below dealer cost. Motivated Seller. Great storage yard machine. - Item ID-12064 - Tom 800.315.9950 x6042006 PRENTICE 384 mounted on a Mack Truck - 2006 PRENTICE 384 mounted on a Mack Truck, 4600 hrs, has been on a yard since 2006 - Item ID-12008 - Daren 800.315.9950 x6032007 Barko 930 Mulcher - 300HP Cummings Engine, Hydraulic Winch with an FAE 300U Mulcher; Approx. 3500 hrs (must be confirmed); Tires 80%; Clean and dry and ready to work. Good condition. - Item ID-12052 - Tom 800.315.9950 x6042007 John Deere 700J LT Dozer - 1155 Hrs; John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6“ blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value. - Item ID-12094 - Tom 800.315.9950 x604NEW 2008 ASV Posi Track RC100 skidsteer loader, has low and high flow, only 600 hrs! Posi Track R-series see one in action! mfg info The RC-100 is powered by the Perkins 1104C-44T turbocharged diesel engine. It is a 4.4 liter 4-cylinder diesel engine that offers high output with low emissions and low sound. In fact, with 304

ft-lb of torque, ASV’s RC-100 has more available torque than any other rubber tracked loader. The Posi-Power Control™ (PPC™) system is an integral part of the RC-100’s powertrain. PPC™ is a power management system that lets you work the RC-100 to its fullest potential as it automatically shifts the hydrostat to match available engine horsepower. With the PPC system, it is virtually impossible to stall the engine. Advanced Hydraulic System The RC-100 features the

most advanced hydraulic system available in its class. The tracks are directly driven by two-speed drive motors with travel speeds up to 11.5 mph. The hydraulic system provides up to 38 gpm to the standard high flow auxiliary circuit on demand or 20 gpm to the low flow circuit. The RC-100’s advanced load-sensing hydraulic system is highly efficient, producing 10 percent more hydraulic horsepower — horsepower that is simply


2004 Komatsu PC 200 LC7Komatsu has highest resale for their excavators. Only 3945 hrs; Cab w/heat and air both working well; UC 60%; Solesby Thumb; Very Clean and well maintained. Excellent value.Item ID: 12096Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2004 Barko 575 Stationary Diesel12,000 hours; Good for sorting deck or Barge mount. Was working everyday when replaced with new. Very good price. High Lift Capacity!Item ID: Call for info!Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

lost on less efficient systems. As a result, you get more done and you get it done faster. Advanced Rubber Track Undercarriage The RC-100 is the only machine in its class designed from the ground

up to run on a suspended rubber track undercarriage. That means there are no compromises when it comes to machine width, ground clearance and machine balance. It also means you get maximum

traction and a smoother ride. Forty-two wheeled contact points spread the machine weight over 18-inch-wide rubber tracks, exerting only 3.5 psi ground pressure. With the RC-100 you can crawl over the most fragile ground with minimal surface disturbance. You can also work productively in virtually any ground condition. As with all ASV equipment, there is no steel inside the rubber tracks so operation is smooth, quiet and with much less friction. Torsion axle suspension of the undercarriage helps maximize contact with the ground for better traction and a much smoother ride than rigid-mounted track systems. It is better for the operator, better for load-retention and easier on the machine. Easy, Comfortable Operation The RC-100’s operator station has more features and built-in comfort than ever before. New joystick controls feature integrated hydraulic and electric attachment controls for precise, low-effort operation. A new hydraulically-operated quick attach is standard so you can connect to many non-powered tools without leaving the operator seat. Tilt-up Service Access A new tilt-up ROPS/FOPS canopy makes access to the hydraulic system quick and easy. Service to the engine and cooling package is through a tilt-up rear hood. - Item ID-11859 - Daren

800.315.9950 x6032008 Bobcat S175 - 2008 Bobcat S175 only 17 hrs!, 46 HP, 68” low-profile bucket, 8 bolt-on teeth Weight: 6,001 - 6,500 lbs $24,000 OBO - Item ID-11841 - Michelle 800.315.9950 x6062008 JD 2554 Harvester with Waratah 624 Processing Head - 4700 hrs; Waratah 624 Harvesting Head. Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller! Well maintained. Below market price. - Item ID-12087 - Tom 800.315.9950 x6042008 Valmet 603 Three Wheeled Feller Buncher - 3700 hrs; 18” Bunching Saw Head; 28” tires at 70%; Rear tire 20%; Cummins 4-cyl, 130 HP uses 4.5 gal/hr.; Very good condition. Excellent thinning machine - Item ID-12053 - Tom 800.315.9950 x6042008 Vermeer BP8000 Bale Processor - BP 8000 bale processor. Machine has big tires and remote for cab. It is not a final cut machine. Excellent condition. MS - Item ID-12099 - Tom 800.315.9950 x604225A Timberjack Skidder - In ready to work condition. 1986. with a 353 Detroit engine. - Item ID-11991 - Michelle 800.315.9950 x606230 Timberjack Forwarder - Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size is 24-5-32. Engine completely rebuilt 3000


Beaver Model 18

Coming Soon4 New Models

2005 Prentice Model 410E2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well MaintainedItem ID: 12079Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2006 JD 700J XLT Dozer1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. One owner who would rather sell than get hammered by trading!Item ID: 12073Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

hrs ago. - Item ID-11993 - Michelle 800.315.9950 x606510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Michelle 800.315.9950 x606518 Cat Grapple Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-11078 - Tom 800.315.9950 x60498’ 620 Prentice Track Cutter - Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,000 hrs. on it. - Item ID-10479 - Tom 800.315.9950 x604Barko 160A with Chop Saw - 1992. Chop Saw 2000 or 2001 included. - Item ID-11117 - Michelle 800.315.9950 x606Barko Fellerbuncher 785 - 1999. with a 22” Koehring head. - Item ID-11334 - Daren 800.315.9950 x603Bell Super T - 1992. serial number BCH3953, 23.1x26 tires. Needs a head - Item ID-11898 - Michelle 800.315.9950 x606Bell Ultra C - 1997. with Cummins 3.9 110-hp 4 cylinder diesel engine. A/C in cab. 18” Koehring saw felling head, joystick controls. 600 hrs on Reman Cummins engine; 5073 total hrs on machine. Very good condition. - Item ID-10803 - Michelle 800.315.9950 x606Bell Ultra T - 1997. with 1989 hrs. 23.1 tires are at 90%, joystick controls, extra 24” bars, new seat, no dents or broken glass. Dangle head. Currently working. A/C in cab. S/N BCH4648 - Item ID-10727 - Michelle 800.315.9950 x606Bobcat 843B Loader - Grapple loader, photos and more info coming soon. - Item ID-10777 - Michelle 800.315.9950 x606

Case 580 Fork Lift - Mid 70’s Fork Lift 580 Case, High Lift, Good Condition - Item ID-11493 - Daren 800.315.9950 x603Cat 242B Skidsteer - 2006. 300 hrs on machine. Cat engine. Includes bucket, forks, spare tire and chains. - Item ID-10845 - Michelle 800.315.9950 x606Cat 518 Grapple Skidder - 1980. with grapple, winch and canopy. Hrs unknown; no meter. - Item ID-11103 - Michelle 800.315.9950 x606Cat 518C Grapple Skidder - 1995. With grapple & winch. 12000 hrs - 200 hrs since engine and transmission were rebuilt. Really good condition. Tires are 28 X 46. Open cab. - Item ID-11293 - Michelle 800.315.9950 x606Cat 545 Grapple Skidder - 2003. Please call for information. - Item ID-10996 - Michelle 800.315.9950 x606Cat 545 Grapple Skidder - 2004. Call for more information. - Item ID-10997 - Michelle 800.315.9950 x606Cat 8000# Forklift - 1985 year, V80E type d. Axle repaired and transmission fixed. - Item ID-10674 - Michelle 800.315.9950 x606CAT D4H TSK WITH WINCH AND FORESTRY PKG - 1987. Only 7500 original hrs. - Item ID-12024 - Daren 800.315.9950 x603Cat D5M XL Dozer - With EROPS, Sweeps and screens. 50,000 pound W5C winch. 3490 hrs. New factory log arch. Very clean and straight machine. - Item ID-11253 - Michelle 800.315.9950 x606Caterpillar D6R with winch, hrs 8211, s/n 5LN00696 - Item ID-11906 - Daren 800.315.9950 x603DEERE 440 - sn#090370, with a winch - Item ID-11431 - Daren 800.315.9950 x603Ford Tractor with Trailer - 1989 Ford Tractor truck with 48’ Great Dane Trailer - Item ID-10671 - Michelle 800.315.9950 x606Franklin 105 and shred king forestry

machine - Both units powered by detroit engines, excellent condition, will separte the units, also have 16” Morbark sheer head for the franklin. serial#fe0159 Model #8000FE - Item ID-10415 - Michelle 800.315.9950 x606Gehl 3935 Skidloader - 2005. with less than 2000 hrs. - Item ID-10643 - Michelle 800.315.9950 x606Gehl 7800 Skidloader - 2004. with enclosed cab. Has radio and heat. - Item ID-11649 - Michelle 800.315.9950 x606Gyro Trac GT25 - Machine has 1278 hrs. - Item ID-11801 - Michelle 800.315.9950 x606Haybuster IG-8 Tub Grinder -

Powered by a 110-hp John Deere diesel engine. Has only 1034 hrs. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Michelle 800.315.9950 x606Hokah mill tie trim and stack station - The electric eye which stops the ties on this 8’ - 12’ trimmer is adjustable so that the sawyer can determine to trim more off one end or the other. Conveyors to take away cut off blocks are part of the system as is the stacker. This item has it’s own integral hydraulic unit in the base. - Item ID-11724 - Michelle 800.315.9950 x606Hood 28000 Loader - 2004; 72” hot saw; only 340 hrs. - Item ID-11418 -


CARDINAL WIRELESS5775 Park Plaza Ct.

Indianapolis, IN 46220317 577 9944 www.cardinal-wireless.com

TWO-WAY RADIOSUp to fifteen miles of loud, clear range

and NO airtime charges.

FREE shipping for minimum 3 units

GPS TRACKINGfor Truck Fleets

ASSET TRACKINGfor Construction Equipment, Generators,

Trailers and Rental Equipment

GATEGUARD®

Remote Gate Control and Radio Communication

Call today for more information:

8 0 0 - 3 3 2 - 3 2 6 8w w w . c a r d i n a l - w i r e l e s s . c o m

HEADSETSfor Hearing Protection

‘08 Valmet 603 3-Wheeled Feller Buncher3800 hours; 18” bunching saw head; Cummins 4-cyl engine with 130HP; Enclosed cab with heat/air/stereo; 28” tires at 70%; Very good condition. Low maintenance. Great thinning machine with zero turn radius. Economical to operate at 4.5 gal/hr. Very good value for hard to find

machine.

Item ID: 12053Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Michelle 800.315.9950 x606Hyundai with 2 Head Roller - 1994 Hyundai with 820 roller stroke Lakewood head. - Item ID-10977 - Michelle 800.315.9950 x606JCB 540 Wheel Loader - 2000. 4X4, 2-1/2 yard quick attach bucket, Extenda hoe, cab with heat and A/C, 5628 hrs, one owner and well maintained. - Item ID-10774 - Michelle 800.315.9950 x606John Deere 240 - Skid Loader 52HP 1785 Hrs. Excellent Condition. 12x16.5 Tires 75% More Details Soon. THANKS FOR LOOKING. - Item ID-11799 - Daren 800.315.9950 x603John Deere 290 - With Elite processing head, 2 roller. 4 cylinder

John Deere engine. Very good undercarriage. - Item ID-10934 - Michelle 800.315.9950 x606John Deere 410D - Backhoe, front end loader, new tires, starts easy and runs great. - Item ID-10726 - Michelle 800.315.9950 x606John Deere 548 D Grapple Skidder - 23/1x26 rubber at 90%. Enclosed cab, no winch. - Item ID-11558 - Daren 800.315.9950 x603John Deere 640E Cable Skidder - 1995. 500 hrs on new motor. Has new winch, new center, new batteries and heavy duty rears. This machine runs great and is ready to go to work. - Item ID-11330 - Daren 800.315.9950 x603

John Deere 640E Skidder - 1993. 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Michelle 800.315.9950 x606John Deere 643D - 1995. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hrs on machine. heated and A/C cab. - Item ID-11414 - Daren 800.315.9950 x603John Deere 648D Skidder - Has new hydraulic pumps, has winch, runs great, 8332 hrs. - Item ID-11711 - Michelle 800.315.9950 x606John Deere 650H - 2000. in great condition. 10’6” blade with 24” new pads. Hydrostatic transmission. 4795 hrs. 90-hp. - Item ID-10560 -

Michelle 800.315.9950 x606John Deere 843H - 2001. 28/26 tires at about 60%. Waratah head, all pins are tight and sheet metal is straight. - Item ID-11337 - Daren 800.315.9950 x603Koehring Hot Saw - 22” head. Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Michelle 800.315.9950 x606Manitou MLT523 - MLT523 Turbo, 2005, Perkins diesel, new front foam filled tires, rear tires are good. 17’ height reach and 8’ straight out, 4 or 2 wheel steer, enclosed cab with air and heat, 1750 hrs, has extra grapple bucket. - Item ID-11605 - Michelle 800.315.9950 x606Massey Ferguson 6170 Tractor - This tractor is a. 1998; it has air in the cab, shuttle shift, 85 to90% rubber on the tires and only 2468 hrs. It is 120-hp. Is 4-wheel drive. - Item ID-10546 - Michelle 800.315.9950 x606Metavic Log Loader trailer - Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. - Item ID-11362 - Daren 800.315.9950 x603Mitsubishi Log Loader - High cab, 66,000 weight, low use with good undercarriage. Has a new starter. Has grapple - Item ID-10780 - Michelle 800.315.9950 x606Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

‘08 JD 2554 Harvester w/Waratah 624 Processing Head4,700 hrs., Waratah 624 Harvesting Head. Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller! Below market price.

Item ID: 12087Contact: Tom800.315.9950 Ext. 606www.LBXonline.com

2006 JD 700J Dozer w/WinchVery clean dozer with winch and low hours of 1869. Enclosed cab with comfort package. Runs strong and is priced to sell. Excellent value and worth a look. NCItem ID: 12101Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

‘08 Dynamic 570 Chipper1900 hrs., Ready to produce. Updated drum. New wear plates. 325HP Cummins. Can handle limbs or full tree. Easy to transport.

Item ID: 12061Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

shear. - Item ID-11468 - Michelle 800.315.9950 x606NEW Pitts LB52-24D Tri-Axle Detach Trailer - 2008 Model. No miles. Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel wells. Priced to sell! NC - Item ID-12089 - Tom 800.315.9950 x604NEW Pitts LT42-8UL 8” Center Drop Log Trailer - Width: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC - Item ID-12090 - Tom 800.315.9950 x604Prentice 180 Loader - Please call for information - Item ID-10917 - Michelle 800.315.9950 x606Prentice 210D - 1991. 30’ boom and S&M Trailer. 6 cylinder BT Cummins (about 140-hp) - Item ID-10602 - Michelle 800.315.9950 x606Prentice 310E Knuckleboom Loader - 1999. with CTR delimber, air & heat, Cummins power and 7900 hrs - Item ID-10916 - Michelle 800.315.9950 x606Prentice 720 Processor - With 33” Timbco Sawhead, 8.3 Cummins diesel engine, 5400 hrs. Also track chains & sprockets are about 40%. - Item ID-11318 - Michelle 800.315.9950 x606Serco 8500 Log Loader - Model 8500, Not mounted - Item ID-12007 - Michelle 800.315.9950 x606Skylead Yarder - $40,000 in new parts. Brand new motor 300 hrs ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc. In good condition. 1999. - Item ID-11527 - Michelle 800.315.9950 x606Tigercat 860 Stroke Delimber - 1999. bought new in 2001. Excellent condition and ready to work. Delimber is a Denharco DM3500. Machine is a one owner, one operator machine. - Item ID-11886 - Michelle 800.315.9950 x606Timbco 425 Feller Buncher - 1996. with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. - Item ID-11031 - Michelle 800.315.9950 x606Timbco 425 with Bar Saw Head - 2002. powered by a 260-hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300 hrs, in good condition and very work ready. - Item ID-11340 - Michelle 800.315.9950 x606Timbco Forwarder - 1998. with 10,000 hrs. - Item ID-11599 - Daren 800.315.9950 x603Timberjack 230D Skidder - 3-cylinder Detroit diesel. Hercules winch. Tires are good. Needs to be jumped across the starter, needs new starter and cylinoid. - Item ID-10561 - Michelle 800.315.9950 x606Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. - Item ID-11072 - Michelle 800.315.9950 x606Timberjack 380 Grapple Skidder - Esco grapple, 453 Detroit Engine. Engine and transmission are strong,

pins are tight. 1980. - Item ID-10950 - Michelle 800.315.9950 x606Tree Farmer 3600 - 3 wheel, hotsaw attachment, 24.5x32 rubber, 6 cylinder Cummins and 6700 hrs. 1999. - Item ID-10659 - Michelle 800.315.9950 x606Valmet 546 - 1991. 955 head, 6 wheel drive. - Item ID-10724 - Michelle

800.315.9950 x606MISCELLANEOUS

9x30 Trommel Screen - This trommel is in good overall condition and is available immediately. Price includes trailer loading. The electric

motors and pump for the hydraulic system is also included as well as sheet metal cover and the support structure. Belly conveyor has been


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

NEW - Pitts LT42-8UL 8” Center Drop Log TrailerWidth: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC Note: Photo shows exact trailer but painted red. Unit available is painted black.Item ID: 12090Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

‘08 John Deere 2554 Tracked Harvester4700 hours; Waratah 624 Harvesting Head. Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller!Contact: Tom800.315.9950 Ext. 606www.LBXonline.com

sold seperately. Low hrs. - Item ID-11471 - Michelle 800.315.9950 x606Armstrong No. 4 Band Saw

Sharpener - Right handed, automatic. Complete with motors, starters, carbide face plate, “Sidewinder” feed finger, one set of cams and a set of post brackets. - Item ID-10564 - Michelle 800.315.9950 x606Container - Refrigerated - Electrical motor controls installed in

this 40’ container, several solid state reduced voltage starters, other starters, breakers, main transformer, etc. - Item ID-10957 - Michelle 800.315.9950 x606Cooks Sharpener - Electric band sharpener - Item ID-10898 - Michelle 800.315.9950 x606Dip Tank System - Installed in 1996. Tank is 10’ wide X 20’ long X 94” deep. Infeed deck is 21’ long X 13’6” wide. Infeed rollcase is 20’ long X 66” wide. Infeed drive is 10-hp. Outfeed rollcase is 45’ long X 66” wide. 2 storage decks, one is 20’L X 11’3”W the other is 20’L X 10’3”W. Hydraulic unit is 50-hp, 3 phase. New cost $230,000.00. (Building in photos is not included.) - Item ID-10850 - Michelle 800.315.9950 x606Elec Route MD 500 metal detector. - Elec Route MD 500 metal detector. Coil unit 03100. 52” hex opening. (32” flats.) Distance thru: 59”. - Item ID-11756 - Daren 800.315.9950 x603Galvanized duct piping - 300’ of 18” - $5 per foot, 300’ of 20” - $6.50 per foot, 50’ of 36” - $11 per foot, 35’ of 48” - $17 per foot - Item ID-10848 - Michelle 800.315.9950 x606Goeing Kerr Tek Tamet metal detector - 50” x50” opening. Distance thru: 48-1/2”. - Item ID-11755 - Daren 800.315.9950 x603Hough 65 Motor for Salvage - w/ a good cummins CN6 motor & converter. - Item ID-10480 - Tom 800.315.9950 x604Loading Ramp - Adustable height ramp, 66” x 30’. 15,000 pound

capacity. - Item ID-10596 - Michelle 800.315.9950 x606Lumber Carts - 15 carts available. Fairly new, very little use. $450 each. - Item ID-10904 - Michelle 800.315.9950 x606Lumber Carts - New - Either with US or import casters. Can also get with adjustable back-stop, $750 each with US casters, $700 each with import casters, add $225 to either for adjustable backstop. Call with any questions. - Item ID-10906 - Michelle 800.315.9950 x606MDI Metal Detector - The opening dimensions of this MDI magnetic metal detector are as follows: Width-46”, height-38” distance thru: 36”. - Item ID-11754 - Daren 800.315.9950 x603Milling machine - Cincinnati #2 vertical milling machine. - Item ID-11797 - Daren 800.315.9950 x603Read Screen All RD90A - 1989. with two-deck screen, 2” top screen and 3/4” bottom screen. In great shape, has 2025 hrs. - Item ID-11088 - Michelle 800.315.9950 x606Round table - 12’ round turn-table in like new condition. - Item ID-11467 - Michelle 800.315.9950 x606Salem Hydraulic Unit - 20-hp, 1745 RPM, 1-1/2 hp circulating motor with 1720 RPM, Denison pump - Item ID-10851 - Michelle 800.315.9950 x606Wood Storage Silo - Two available. 14’ diameter X 30’ cylinder size. Caged ladders & guardrail with toe bar. Metering bins with


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148 www.sawmillexchange.com

2006 Barko 495 Crawler Loader48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service. 9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. NCItem ID: 12102Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2007 John Deere 700J LT DozerOnly 1155 Hours! John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6“ blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value.Item ID: 12094Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

NEW - Pitts LB52-24D Tri-Axle Detach Trailer2008 Model. No miles. Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel wells. Priced to sell! NCItem ID: 12089Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘03 Mack w/’99 Serco 8000 Loader93 Mack CL713; Mac E-7 400hp engine; 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires; Factory built double steel frame; Complete HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4 squirt boom; This is a factory built Log Truck.Item ID: 12098Contact: Tom800.315.9950 Ext. 606www.LBXonline.com

discharge augers. Internal “Flying dutchman” system. Wood or paper storage. - Item ID-10814 - Michelle 800.315.9950 x606

MOULDERSFukami 6-head moulder NTX-150 - Item ID-11753 - Michelle 800.315.9950 x606

PALLET MACHINERYBob Hanna Double Head Pallet Notcher - Item ID-11815 - Michelle 800.315.9950 x606Bronco Model 2006 - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. still available as of 6/4/09 - Item ID-10542 - Michelle 800.315.9950 x606Bronco Pallet Machine - Model 300 with stacker can do a maximum of 54” x 54” - Item ID-10678 - Michelle 800.315.9950 x606Hawk Bandsaw Dismantler - Powered by a 3-phase, 15-hp electric motor. Has a 64” table. Can be a one or two-man machine. Large tires for extended blade life. Capacity is 50-80 pallets per hour. Manufactured by Saw Service & Supply Co. - Item ID-11065 - Michelle 800.315.9950 x606Mark I Pallet Dismantler - one-man, 62” table Mark I - Item ID-11811 - Michelle 800.315.9950 x606Pallet Chief lll auto naller Pallet Chief 3 - Item ID-11812 - Michelle 800.315.9950 x606Press for Applying Mending Plates - Pneumatic operated but is designed to easily switch over to hydraulics. Used in a business that specialized in non-standard sized pallets. For long stringers, used this press to join shorter stringers together with a mending or truss plate. The frame is 9’ long and has 4 quick acting pneumatic cylinders to firmly hold the pieces to be joined

in place. - Item ID-11068 - Michelle 800.315.9950 x606Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hrs on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800.315.9950 x606Third Man Inc. Pallet Nailing Unit - Model TMN-075, S/N PJ0075, Handles Up To 48 x48, Does 3 Or 4 Stringer Pallets. - Item ID-11890 - Michelle 800.315.9950 x606Third Man Nailer with Stacker - Item ID-11809 - Michelle 800.315.9950 x606Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical

cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item

ID-12011 - Daren 800.315.9950 x603PLANERS


JOCKEY GRINDER OWNERS!!!

“EZ-SLIDE” TOOTH STOP & TOOTH REST

This Patented, Spring Loaded Design• Allows for EZ sliding of the grinding wheel to the tooth.

• Eliminates the sticky divots of the old style wear plates.

• Saves you time and money with better control of the sharpener and

more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

Call 1-800-582-0470 TODAY

Our sawyers say they will not go back to

the old style parts.

Joe NowakLumberjack Hardwoods

Menominee, Michigan

This is one of the best innovations in our industry to

come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers Timber

Old Monroe, Missouri

www.menomineesaw.com

American 30” single surfacer. - American # 444 . Thickness capacity appears to be 7”. Three knife head on ball bearings. Segmented chipbreaker and infeed rolls. (Sleeve brngs on feed rolls.) Chipbreaker bar lifts right out for ease of knife setting. Knives measure approx. 135 thou thick. 15 HP three phase on main shaft and feed rolls belt to this. Readily addaptable for line shaft use. Well guarded. A nice unit. - Item ID-11784 - Daren 800.315.9950 x603Complete Planer Mill - Yates American A20, 8 knife, belt driven with top and bottom profile; 54” McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. - Item ID-10994 - Michelle 800.315.9950 x606Greenlee 30” double surfacer - This 30” straight knife double surfacer

has 4 knife heads with a 5” cutting circle. It opens to 7-1/4”. There are four top and four bottom feed rolls. There is a jointer for the top head. I was told by a planer expert that it would make a good finish planer. - Item ID-11780 - Daren 800.315.9950 x603Newman 4-sided planer - This 6-3/4” x 16” capacity 4-sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9” feed rolls rather than 8”. - Item ID-11729 - Michelle 800.315.9950 x606Newman S682 two sided planer. 6”x30” capacity. 6 knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped

with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. - Sectional top chipbreaker with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed from 50 - 150 FPM, feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with 2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 - Michelle 800.315.9950 x606Yates American planer, 18” model J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! - Item ID-11860 - Daren 800.315.9950 x603Yates Model 277 30”x14” double surfacer - 40 HP top. 25 HP bottom. 6 knife heads. Opens to 14” thickness. - Item ID-11779 - Daren

800.315.9950 x603Yates-American A-62 4 sided planer - This machine has 12 knife main heads with a 15” wide cut. The side head shafts are 1-13/16”. - Item ID-11762 - Daren 800.315.9950 x603

PORTABLE SAWMILLBolter Mill 12’ capacity 60 hp - Item ID-11736 - Michelle 800.315.9950 x606Timber Harvester HD-30 - powered by a 25-hp Kohler gas engine. It is a 2005. with approximately 400 hrs. Runs great and comes with 2 boxes of blades - Item ID-12009 - Michelle 800.315.9950 x606Timber Harvester Sawmill - 5600hrs runs and works great, cuts 30”wide and 21’long 30hp Deutz motor fully hydraulic mill - Item ID-11895 - Daren 800.315.9950 x603

RECYCLING EQUIPMENT1991 Haybuster IG-8 tub grinder - 1100 hrs, 2” screens, john deere diesel engine, swing hammers have been replaced, discharge belt has


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

Single Machine or Complete Turn-Key OperationMore Production & Profit is Only One Call Away

For Parts, Service & Sales

Call (423) 698-0284

been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800.315.9950 x6031994 Duratech HD8 8’ tub grinder, has only 204 hrs on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3” and 1 7/8”), 10’ discharge conveyor, good tires, 25/16” ball hitch on trailer. original owner’s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. - Item ID-11861 - Daren 800.315.9950 x6031994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 - Michelle 800.315.9950 x6061995 Diamond Z 936 Tub Grinder - Tub grinder with single axle. Powered by a Cat diesel engine. - Item ID-11882 - Michelle 800.315.9950 x6061995 MORBARK 1250 - Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. - Item ID-11704 - Daren 800.315.9950 x6031995 WHO P12-56 Tub Grinder - Cat 500 hp, hyd raising tub, updated/new hammer mill, new tub floor, clean unit ready for work. - Item ID-11818 - Daren 800.315.9950 x6031996 Morbark 2400 Chipper - Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID-11879 - Daren 800.315.9950 x6031996 Vermeer TG400 Tub Grinder - Powered by a Cat 3406 400-hp diesel engine and has only 1432 hrs. Has discharge conveyor. Well maintained. - Item ID-11486 - Michelle 800.315.9950 x6061997 Morbark 1200 Tub Grinder - Hour Meter Reads 1021, 3412 Cat Diesel, Morlift 350 Grapple, Excellent machine for your grinding needs. $65000 - Item ID-12035 - Michelle 800.315.9950 x6061999 CBI Model 4800 Grinder - 1680 Hrs: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800.315.9950 x6042000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done

by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Michelle 800.315.9950 x6062000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls with A/C and heat. New drum and bearings. serial# is 4661100-3036 - Item ID-11363 - Daren 800.315.9950 x6032001 Morbark 3036 - Whole tree chipper, powered by a 325-hp Cat diesel engine; has self-loading grapple; one year old heavy duty drum and runs great. - Item ID-11587 - Michelle 800.315.9950 x6062001 ROTOCHOPPER MC166 - 3600 hrs, Cat 3406 460 hp, includes coloring attachment - Item ID-11692 - Daren 800.315.9950 x6032002 Brush Bandit 250 - 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hrs on new engine, 1260+/- hrs on frame, upper feed wheel hydraulic lift, work ready! - Item ID-11835 - Michelle 800.315.9950 x6062003 Morbark 7600 - 3200 hrs on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800.315.9950 x6062003 ROTOCHOPPER CP118 - Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit breaker for

the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour - Item ID-11973 - Daren 800.315.9950 x6032003 ROTOCHOPPER CP118 - 80hp, 790 hrs, CAT diesel engine, fixed

hammers, one-pass re-grind & coloring system. - Item ID-11287 - Daren 800.315.9950 x6032004 BANDIT 3680 Beast Horizontal Grinder - approx. 4500 hrs., working Daily - Item ID-11819 - Daren 800.315.9950 x6032004 Bandit Beast - Powered by a


Why?Why?We use only the highest quality nickel alloy steel •

NEW• state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and •

manufacturing experience Proudly made in the • USAStock to 10 days on standard sizes•

Nations largest distributor/manufacturer of saws •

and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

V12 800-hp Cat diesel engine. 2300 hrs. Photos coming soon. - Item ID-11233 - Michelle 800.315.9950 x6062005 Rayco RC12 Chipper - John Deere engine with 500 hrs, ulsating down pressure, like new condition. Machine is capble of chipping 12” wood. This machine is all but brand new. Has been kept in garage. - Item ID-11351 - Daren 800.315.9950 x6032006 Bandit 2680 Horizontal Grinder - Only 765 hrs; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5 tires. This machine is very clean in excellent condition. - Item ID-12048 - Tom 800.315.9950 x6042006 Morbark 18 chipper - 180hp Cat, 160 hrs, tandem axle. 10,000lbs, curbside jack, 65”x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID-11355 - Daren 800.315.9950 x603CBI Magnum Force 4800 - 2001. 3000 hrs, magnetic head pulley, heavy duty grate liner with cutting anvil, 3412E 1000-hp Cat engine with Flexx Aire Fan. Solid steel rotor. Hammers, grate liner and discharge belt have been replaced and have less than 100 hrs on them. - Item ID-10577 - Michelle 800.315.9950 x606Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hrs. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-11803 - Michelle 800.315.9950 x6061999 Duratech HD12’ great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hrs on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use - Item ID-11848 - Michelle 800.315.9950 x606Duratech HD-8 - This tubgrinder has an 8’ tub with a tub extension. It has just over 700 hrs. It is powered by a 125-hp John Deere diesel engine. It has new hammers. 1994. Tub extension is 10’3” wide and bolted on, so it can easily be removed for shipping. - Item ID-10804 - Michelle 800.315.9950 x606Duratech HD8, tub grinder w/ coloring unit - Duratech HD8 Duratech / Haybuster HD8 tub grinder with coloring attachment, John Deere, 130 horsepower, 1100 hrs, swing hammers, magnet on 5’ conveyor, variable speed tub with load sensor, 3 sets of screens, 3”, 2”, and 1.75”, 90’s model - Item ID-11867 - Daren 800.315.9950 x603Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hrs. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 - Michelle 800.315.9950 x606Fecon 3250 Horizontal Grinder - 1995. powered by a Cat 3306. Includes remote control. Has only 1000 hrs. - Item ID-10798 - Michelle 800.315.9950 x606Fecon MZA 2500 - 2004. 400 hrs. Cat diesel engine, 250-hp. S/N 2S000692164 - Item ID-10799 - Michelle 800.315.9950 x606Gehrlinger - Powered by a perkins diesel and has power-shift transmission. Rated at 46,000 pounds and runs good. - Item ID-10781 - Michelle 800.315.9950 x606Gyro Trac GT25 - Machine has 1278 hrs. - Item ID-11801 - Michelle 800.315.9950 x6061992 Haines Bagger, single bagger, stationary, with large hopper, sealer, take-away belt, 8’ X 18” Ruff Top elevated conveyor, originally set up for bagging sand and gravel, owner used only a short while, and then it sat. always stored indoors, single phase electric see a similar model by Haines..click HERE Haines manufacturer still provides parts for this older unit. - Item ID-11826 - Michelle 800.315.9950 x606Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID-11554 - Michelle 800.315.9950 x606Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hrs. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Michelle 800.315.9950 x6061993 Morbark 1050 Tub Grinder, 4100 hrs on a 3406 CAT diesel engine, Magnetic head pulley, wood chip coloring attachment, and self loader (grapple), 6 sets of screens (4 - 4x6 inch screens, 1 - 2 inch screen, and 1 - 1 inch screen), Extra hammers, tips, nuts and bolts, wheel base, and tons of other small parts, Spare (new) hammermill, Recently changed clutch, hydraulic motors and hydraulic pump, The unit can easily grind over 100 cubic yards an hour and has a variable speed control. - Item ID-11312 - Daren 800.315.9950 x603Morbark 1200 Tub Grinder - 1993. ; rebuilt by Morbark in 1999.


Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. - Item ID-10773 - Michelle 800.315.9950 x606Morbark 1200 Tub Grinder - Powered by a Cat 3412 650-hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Michelle 800.315.9950 x606Morbark 2400XL 20” Drum Chipper with Grapple - 2003 Morbark Model 2400XL Hurricane, 20” capacity hydraulically feed drum chipper with a Morlift 150 grapple, Cummins 260 HP turbo diesel engine, 2655 hrs, hydraulic down riggers, tung jack and chute turner, dual feed rollers. - Item ID-11678 - Daren 800.315.9950 x6032007 Morbark 2600 Portable Grinder - 321 hrs. Portable wood hog. Powered by a 250-hp Cat diesel engine. Can choose from a 3”x5” rectangular screen or a 4” octagon screen. This machine is $220,000 new. Does have full warranty - Item ID-10743 - Michelle 800.315.9950 x606Morbark 290 Wood Chipper - everything done and ready for spring , great machine for landscaper or a second back up machine for a small tree company; chipper has always started and chipped; extra sharpened blades; it has a cummins diesel engine; 88 horse power; has new tires and brakes - Item ID-11897 - Daren 800.315.9950 x603MORBARK 58 3-knife Chipper, This machine is ready to work - Item ID-12082 - Daren 800.315.9950 x6031994 Morbark N-viro Mulch 2000 - Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-10551 - Michelle 800.315.9950 x606Powerscreen Mark II - Portable screening plant with conveyor. - Item ID-11585 - Michelle 800.315.9950 x606Remu MSU2-300-US Trommel Screen - Powered by a Ford 5.95L, 6-cylinder tubo diesel engine, 9’X6’ trommel screen, tandem axle, 4 conveyors, rear conveyor is a pivoting stacking conveyor. 1991. - Item ID-10998 - Michelle 800.315.9950 x606ReTech 622 Screener - 1994. powered by John Deere diesel. Extra screens & brushes and in great shape. 1/2” and 3/8” screens. - Item ID-10762 - Michelle 800.315.9950 x606UNIVERSAL REFINER PDR96 SUPER CONTENDER - 450 hp cummins, rebuilt engine & many wear parts replaced within 1000 hrs, machine has 6770 hrs on it. Discharge is a 20’ blower pipe. sn#PDR-96-12 - Item ID-11440 - Daren 800.315.9950 x603

Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400-hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hrs. Also a folding discharge conveyor. - Item ID-10539 - Tom 800.315.9950 x604WHO P-12 Tub Grinder - 1989. with 3486 hrs. - Item ID-11873 - Michelle 800.315.9950 x606

RESAWS2001 Fastline Gator 128 Band Resaw - Resaw, Single Head, 8x8 Cap. 20HP, 220V/3Ph/60Cy, S/N: 101001-66 - Item ID-12023 - Michelle 800.315.9950 x60642” Mcdonough Band Resaw - Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal. - Item ID-10477 - Tom 800.315.9950 x604Brewco B-1600 BRAND NEW!!! - BRAND NEW!!! Brewco B-1600 has never been plugged in. Owner purchased a much larger machine - Item ID-11249 - Michelle 800.315.9950 x606Kent Resaw - 1-1/4” bands, variable speed gear box. Extra wheels and 1/2 box of bands. 10’ return. 2001. Extended Return Belt and a Electric Band Sharpener - Item ID-10897 - Michelle 800.315.9950 x606Morgan band resaw - Morgan band resaw has automatic return belt, 220/440, 3-phase, early 90’s model - Item ID-11866 - Daren 800.315.9950 x603Morgan Four-Head Resaw - Morgan Four Head Resaw - Item ID-11810 - Michelle 800.315.9950 x606

ROLLING STOCK1974 Peterbuilt Water Truck - Model 351; Good condition. Runs and pumps water well. - Item ID-12060 - Tom 800.315.9950 x6041983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint,

front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k#

lift capacity @ 10 feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800.315.9950 x606

SAW GRINDERS & STRETCHERS


800.315.9950 x606Armstrong #4 - Bandsaw Sharperner - complete sharpener for left hand blades from 6” to 14” wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features “Sidewinder” spring loaded feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4” or narrower bands with slight modification. - Item ID-11618 - Michelle 800.315.9950 x606Baker 3630E Band Sawmill - 2001. 20’ Stationary unit powered by a 30-hp electric motor, 7.5-hp hydraulic unit. Includes electric set works and the control & hook-up for a log deck. Has been completely shop checked. Can take up to a 36” diameter log. - Item ID-10566 - Michelle 800.315.9950 x606Corley Sawmill ***SOLD*** - Model 385 Sawmill mounted on trailer frame - Item ID-10676 - Michelle 800.315.9950 x606Frick Slab dump - Overall footprint: 58” x 18’-3”. Plan view sketch available. This is a heavy duty well built unit. - Item ID-11786 - Daren 800.315.9950 x603KM-16 Trimsaw - Trimsaw - Item ID-11670 - Michelle 800.315.9950 x606Log Decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame. Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 - Michelle 800.315.9950 x606Lumber Transfer - Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain - Item ID-11669 - Michelle 800.315.9950 x606Meadows Portable Mill - 56” sawblade, setworks, new wheels on carriage, includes 4 extra blades (2 need work). Very good condition. $6,000 worth of work to setworks and carriage. Pulley system. - Item ID-10895 - Michelle 800.315.9950 x606

SHAVING EQUIPMENT2006 SALSCO 30 Shaving Mill - Hour meter is not working properly, 83 hp cat, Box is 102”x 30”, has a blower and all knives in blower are in good shape - Item ID-11977 - Daren 800.315.9950 x6032007 SALSCO 30 Shaving Mill with Blower, 1686 hrs, 83 hp Cat Engine, Box is 120”x 30” - Item ID-11978 - Daren 800.315.9950 x603Shaving Mill - Shop built, set up 1 year ago. Box is 48”W x 5-1/2’L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about $150 per month in electric use. - Item ID-11975 - Michelle 800.315.9950 x606

Dawson 2-Saw Air Trim Saw - Trimmer cuts cants with operator sliding material left or right on rollers. It has manual stops, saws are foot operated. Includes a waste belt conveyor below. - Item ID-10712 - Michelle 800.315.9950 x606Diehl air operated crosscut saw. Suitable for behind a roller line. Has an 18” saw. - Item ID-11740 - Michelle 800.315.9950 x606Mereen-Johnson 431-DC Gang Rip Saw with Laser - Model 431-DC, S/N: MJ-4728, 31IN Capacity, Comes with Mereen-Johnson Laser Set-Up - Item ID-12019 - Michelle 800.315.9950 x606Newman Drop Saw Trimmer - Has 7 adjustable saws. Has built in scrap conveyor. Includes all motor and starters. - Item ID-10714 - Michelle 800.315.9950 x606Slab Saw - New Slab Saw by Precision Mills. 1 blade. - Item ID-11643 - Michelle 800.315.9950 x606

TRANSFER DECKS3 Channel Live Deck - About 25’ long - Item ID-10896 - Michelle 800.315.9950 x606

TRIMMERSDawson Brothers Double End Trimmer - Comes with gas and electric motors. 30’ waste conveyor; air hoses and regulators included. - Item ID-10748 - Michelle 800.315.9950 x606

1985 Wilson 20-ton Tilt Deck Trailer - excellent deck, 90% tires, air brakes, - Item ID-11591 - Daren 800.315.9950 x6031988 Mack RW713 Day Cab Log Truck - Mack E6-350, 350 HP, 15 Speed Eaton Fuller Transmission, Spring Ride, GVWR: 52,000, Odometer Reads: 612,933, VIN: 1M2AY10Y0JM003060 - Item ID-12000 - Michelle 800.315.9950 x6061989 International Truck with Barko Loader - Model F-2574. 228” wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint. No leaks, clean and dry 1998 Barko Loader. - Item ID-11655 - Michelle

Simonds Vertical Circle Saw LevelerExcellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131. Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed

on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick.Item ID: 12084Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

Trim All “All in One” Trim Saw AttachmentOrder through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest

performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips.ItemID: 12105Contact: Tom800.315.9950 Ext. 606www.LBXonline.com

Armstrong Band grinder. - Nice #4 L.H. Armstrong Band grinder. Serial RB 6642. Air back feed. 3 Stands. Updates. Cams: 50E 4U W, 50E 4U F - Item ID-11777 - Daren 800.315.9950 x603

SAWMILL1995 Simonds Automatic Bandsaw Leveler - 1995. Excellent Condition. Will improve cutting accuracy, filing room safety, saw life, leveling quality and filing room productivity. The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Great value and a smart investment! - Item ID-12085 - Tom 800.315.9950 x6041995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hrs-3984 Hrs. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick. - Item ID-12084 - Tom 800.315.9950 x6042005 Cooks Acu-track AC 36 Heavy Duty - 2 Machine has 1300 hrs on

it, 51 HP Perkins Diesel. Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the hydrolic controls, it comes with a De-barker/De-Mudder to save wear and tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. - Item ID-11902 - Daren 800.315.9950 x6032007 Cooks Portable Sawmill with portable edger - 2007 AC-36 Cooks Portable Sawmill with portable edger, 301 hrs, tires are in good condition and ready to work. 51-hp diesel, setworks, mudsaw, sharpener. Edger is a Cooks 14” - Item ID-12016 - Michelle 800.315.9950 x60672” CSI R72 Circle Saw -. 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs - Item ID-10767 - Michelle

AmbitrimGANG TRIM SAW

Fully adjustable. Fully automatic.18”-diameter circular saw blades.

Saws material up to3!” thick " 12” wide.Call (573) 663-7711

Call toll-free: (800) 548-6914

www.logtolumber.com


HEAVY DUTY FORKSAT BIG SAVINGS

■

■

■ LET US QUOTE YOUR

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

Vermeer BP8000 Bale ProcessorMachine has big tires and remote for cab. It is not a final cut machine.

Excellent condition. Owner ready to sell. MSItem ID: 12099Contact: Tom800.315.9950 Ext. 606www.LBXonline.com

CAT 950GII Front End Loader950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269 WAItem ID: 12100Contact: Tom800.315.9950 Ext. 606www.LBXonline.com800.315.9950 x606

1989 Kenworth T800 Log Truck w/Log Trailer - Cat 3406B Diesel Engine, Fuller RT0187 18-Speed Transmission, 425 Horsepower, 80,000 GVW, 230 Wheelbase, Odometer Reads: 946,784, VIN: 1XKDDB9X6KS536125, with 1984 White Log Trailer, 26’ Length, VIN: SA100WHITLOG84529 - Item ID-12001 - Michelle 800.315.9950 x6061996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Michelle 800.315.9950 x6061996 Freightliner w/Prentice 120C Knuckleboom - Knuckleboom mounted behind the cab, Cat 10 speed - Item ID-11593 - Michelle 800.315.9950 x6061996 Peterbilt Model 377 - 1996 Peterbilt tamdan, 22-foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready to go to work. just put new shocks on front. Bed sides are 60”. - Item ID-11597 - Michelle 800.315.9950 x6061997 Mack CH613 w/1997 Sta-Lite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96” log loader trailer - Item ID-

11588 - Daren 800.315.9950 x6031998 Cargo Walking Floor Trailer, 45FT x 102IN - Tandem Axle, GVW: 68,000, Air Ride Suspension, Air Brakes, Aluminum Wheels, VIN: 1C9WX4526WC450129 - Item ID-11998 - Michelle 800.315.9950 x6061998 MACK CL713 - 1998 Mack w/ a 1998 Serco Loader, 25’ Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. - Item ID-11529 - Daren 800.315.9950 x6031999 MACK CL713 - 1999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E-7 Mack @ 460 hp. 8LL trans., cruise, Serco 8000 Loader, dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22’ deck, 22.5 tires, aluminum wheels, hub piloted - Item ID-11530 - Daren 800.315.9950 x6032002 Kenworth T800 Log Truck and Trailer - Cummins ISX, 475 HP, 18 Speed Eaton Fuller Transmission, Lift Axle, Odometer Reads: 522,028, VIN: 1NKDX4EX52S894416 with 2002 Whit-Log NBSE100 Log Trailer, GVWR: 34,000, VIN: 1W90111052SW02033 - Item ID-11999 - Michelle 800.315.9950 x6062002 MACK GRANITE CV713 - 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES

AND BRAKES at 80% - Item ID-11700 - Daren 800.315.9950 x6032003 Mack CH613 - With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning. 210,000 miles. Good tires. - Item ID-11087 - Michelle 800.315.9950 x6062003 Volvo Model 660 - This truck has been converted to a Toter Truck for pulling a 38 ft fifth wheel, has a 475 hp isx cummins deisel with 10 speed automatic trans. bunk bed and referigator,air ride fifth wheel, and much. much. more. - Item ID-11596 - Michelle 800.315.9950 x60625’ Deck trailer with dove tail - 25’ deck trailer with dove tail. Photos coming soon. Is a 2007. - Item ID-11676 - Michelle 800.315.9950 x606Great Lake Log Jammer - 1983. LOG JAMMER IS A PRENTICE S/N# 90P22414 MODEL# F90, STICK ON JAMMER 20’ - Item ID-11592 - Daren 800.315.9950 x603Hobbs End Dump - 1975. 26 feet long, 5.5 foot high sides. Cylinder weeps and tires are not good. - Item ID-11085 - Michelle 800.315.9950 x606Johnson Short Wood Pup Trailer - 2 short wood pup trailers; tire size 11R 22.5; good condition; price is $6,000 each. - Item ID-11657 - Daren 800.315.9950 x603Kent Pole Trailer - 1990. - Item ID-11855 - Michelle 800.315.9950 x606Kenworth W900B Logging Truck - 2000. truck powered by a Cat 3406E, 550-hp. 18 speed, 460,000 miles, 430 ratio, Henrickson HN suspension,

dual exhaust, dual air cleaners. Truck drives great. Also has a 2004 Serco 8500 Log Loader with cooler and extenda boom mounted behind the cab. 22’ log body. - Item ID-11478 - Michelle 800.315.9950 x606Nabors Pole Trailer - 1987. Truck not included with trailer. Call with questions. - Item ID-11854 - Michelle 800.315.9950 x606Pup Trailer - 3 axle load hog pup trailer. Rebuilt in 2005. - Item ID-11416 - Michelle 800.315.9950 x606Wisconsin Tiltbed Trailer - 1973. Two axle, fifth wheel pull, ex-forest service. Has good tires. - Item ID-11084 - Michelle 800.315.9950 x606‘93 Mack with ‘99 Serco 8000 Loader - 93 Mack CL713; Mac E-7 400hp engine; 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires; Factory built double steel frame; Complete HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4 squirt boom; This is a factory built Log Truck. - Item ID-12098 - Tom 800.315.9950 x604

WOODWORKINGBaker BX Resaw - 2 turntables. 30-hp electric 3-phase motor - Item ID-10570 - Michelle 800.315.9950 x606McDonough 54”band saw - This is a square column, weight strain machine. The serial # is 54 1076. - Item ID-11741 - Michelle 800.315.9950 x606

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper? Why are our customers so loyal?

Intelligent Design

Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and backed up with . . . World class factory service and support.

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“Perfect In One Pass” .

217 West Street St. Martin, MN 56376

6084523651 3205483586

http://www.rotochopper.com [email protected]

Grinding Ag Biomass Grinding Forestry Biomass

Electric Diesel



Intelligent Design






6084523651 3205483586



Electric Diesel



Intelligent Design






6084523651 3205483586



Electric Diesel

THE LUMBERMAN’S EXCHANGE

Post Office Box 1916Columbia, Tennessee 38402

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

LBXonline presents The Lumberman's Exchange

Documents

Transcript of LBXonline presents The Lumberman's Exchange