Textiles Catalogueintertex.ca/.../10/IntertexTextilesIncTextilesCatalogue1.pdfIntertex Textiles Inc....
Transcript of Textiles Catalogueintertex.ca/.../10/IntertexTextilesIncTextilesCatalogue1.pdfIntertex Textiles Inc....
-
Intertex Textiles Inc.
1200 Speers Road Unit 2
Oakville, Ontario, Canada
L6L 2X4
Textiles Catalogue
Phone: (905)842-7627
Fax: (905)842-7704
E-mail: [email protected]
W: www.intertex.ca
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G09P77- -31
9 oz. Premium Fibreglass Fabric
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Tan, Heat Treated, Red Available
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 8.5. (288 gm/sq.m)
FABRIC THICKNESS, inches 0.020 (0.50mm)
WARP STRENGTH, lbs/in. 100.0 (45.4 Kg/2.54cm)
FILL STRENGTH, lbs/in. 40.0 (18.2 Kg/2.54cm)
ABRASION RESISTANCE Low
TEMPERATURE TOLERANCE To 1000˚F (540˚C)
CHEMICAL RESISTANCE Excellent except Hydrofluoric and hot Phosphoric acid and wet
Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High dielectric strength, low constants
AVAILABLE FINISHES
FINISH NUMBER 31 Heat Treated, Red available, See Fabric Finish Options data
sheet
CERTIFICATIONS MIL-C-20079 MIL-I-24244
US Coast Guard 164.009
NRC 1.36
STYLE: G09P77- -31
An AMATEX woven thermoglass light weight fabric which has been heat treated to a
natural tan shade. Applications include lagging cloth, marine and industrial use, light
weight curtain materials. Resistant to most chemicals, offers good thermal protection to
temperatures up to 1000˚F (540˚C).
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G19P33- -31
19 oz. Premium Fibreglass Fabric
STYLE: G19P33- -31
An AMATEX woven thermoglass fabric which has been heat treated to a natural tan
shade, or dyed red. Applications include welding protection, curtain materials, and
insulation fabric. Resistant to most chemicals, offers good thermal protection to
temperatures up to 1000˚F (540˚C).
SPECIFICATIONS
BASE FABRIC 100% Fibreglass
COLOUR / APPEARANCE Tan Heat Treated or Red
AVAILABLE WIDTHS, inches 30”, 40”, 60”, 72” (0.75m, 1.0m, 1.5m, 1.8m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 17.7 +/- 10% (602 gm/sq. m)
FABRIC THICKNESS, inches 0.030 (0.76mm)
WARP STRENGTH, lbs/in. 200.0 (90 Kg/2.54cm)
FILL STRENGTH, lbs/in. 100.0 (45.5 Kg/2.54cm)
ABRASION RESISTANCE Medium
TEMPERATURE TOLERANCE To 1000˚F (540˚C)
CHEMICAL RESISTANCE Excellent except Hydrofluoric and hot Phosphoric acid and wet
Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High Dielectric strength, low constants
AVAILABLE FINISHES
FINISH NUMBER 31 Heat Treated, 42 PVC Binder, Red Available, see Fabric Finish
Options data sheet
CERTIFICATIONS MIL-C-20079 MIL-I-24244
US Coast Guard 164.009
NRC 1.36
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G19P33- -31AL3
STYLE: G19P33- -31AL3
An AMATEX woven thermoglass fabric, plain weave, heat treated with aluminum foil on
on side. Applications include protective curtains, lagging cloth, vapor and flange spray
shields, and heat reflection. Resistant to most chemicals, offers good thermal protection
to temperature up to 1000˚F (540˚C).
Aluminized Premium Quality
19oz. Fibreglass cloth
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Aluminum foil one side, tan reverse side
AVAILABLE WIDTHS, inches 48”, 58”, 60” (1.22m, 1.47m, 1.52m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 20.5 (697 gm/sq. m)
FABRIC THICKNESS, inches 0.032 (0.81mm)
WARP STRENGTH, lbs/in. 200.0 (90.9 Kg/ 2.54cm)
FILL STRENGTH, lbs/in. 100.0 (45,4 Kg/ 2.54cm)
ABRASION RESISTANCE Medium
TEMPERATURE TOLERANCE
Base fabric to 1000˚F (540˚C)
Acrylic Adhesive to 325˚F (163˚C)
Aluminum foil to 1000˚F (540˚C)
Coating Certifications 1 Mil Aluminum Foil
CHEMICAL RESISTANCE Excellent except Hydrofluoric and hot Phosphoric acid and wet
Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
AVAILABLE FINISHES
FINISH NUMBER
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G24PBB- -00
STYLE: G24PBB- -00
An AMATEX woven roving thermoglass fabric of a medium weight in a plain weave.
Applications include all general industrial uses which do not require rigid specifications.
Resistant to most chemicals, offers thermal protection for temperatures up to 1000˚F
(540˚C).
24 oz. Industrial Quality Fibreglass Fabric
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE White or Orange
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 24 (814 gm/sq.m)
FABRIC THICKNESS, inches 0.036 (+/-.005”) (1.19m)
WARP STRENGTH, lbs/in. 225 (102 Kg/2.54 cm)
FILL STRENGTH, lbs/in. 200 (91 Kg/2.54 cm)
ABRASION RESISTANCE Good
TEMPERATURE TOLERANCE To 1000˚F (540˚C), Higher for brief periods
CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and
wet Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High Dielectric strength/ low constants
AVAILABLE FINISHES
FINISH NUMBER See Fabric Options data sheet
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G30PAB- -7B
STYLE: G30PAB- -7B
An AMATEX woven roving thermoglass fabric of a heavier weight in a plain weave
coated with blue Vertex. Applications include all general industrial uses as well as
welding and stress relief blankets and drop cloths. Resistant to most chemicals, offers
thermal protection up to 1600˚F (870˚C)
30 oz. Industrial Quality
Blue Vertex Fibreglass Cloth
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Blue
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 30 (1019 gm/sq.m)
FABRIC THICKNESS, inches 0.048 (+/-.005”) (1.22m)
WARP STRENGTH, lbs/in. 300.0 (136 Kg/2.54cm)
FILL STRENGTH, lbs/in. 150.0 (68 Kg/2.54cm)
ABRASION RESISTANCE Good
TEMPERATURE TOLERANCE To 1600˚F (870˚C), Higher for brief periods
CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and
wet Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High Dielectric strength/ low constants
AVAILABLE FINISHES
FINISH NUMBER 7B, Vertex Blue, See Fabric Options data sheet
*Temperature Tolerance established only as a benchmark of
fabric to a propane torch flame test exposing the fabric to 2000°
F during which hole(s) do not form in the cloth. At this
temperature the fibreglass fabric does, however, brittle.
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
PADMASTER 20
STYLE: PADMASTER 20
An AMATEX woven thermoglass fabric of medium weight with special vertex treatment
to a tan colour. Applications include pad fabrics, flange and valve covers, weld curtain
materials, and insulation fabrics. Resistant to most chemicals, offers excellent heat and
flame protection to temperatures up to 1200˚F (650˚C)
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Tan
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 20 (679 gm/sq.m)
FABRIC THICKNESS, inches 0.034 (0.86mm)
WARP STRENGTH, lbs/in. 3000 (136 Kg/2.54cm)
FILL STRENGTH, lbs/in. 280.0 (127 Kg/2.54cm)
ABRASION RESISTANCE Medium
TEMPERATURE TOLERANCE To 1200˚F (650˚C) Higher for very brief periods
CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and
wet Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High dielectric strength, low constants
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
PADMASTER 34
STYLE: PADMASTER 34
An AMATEX woven thermoglass heavier weight plain fabric with special vertex treatment
to a tan colour. Applications include hot side insulation fabric, flange and valve covers,
weld curtains, stress relief blankets and drop cloths. Resistant to most chemicals, offers
good heat and flame protection to 1200˚F (650˚C).
34 oz. Fibreglass Insulation Pad Fabric
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Tan
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1/5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 34 (1155 gm/sq.m)
FABRIC THICKNESS, inches 0.043 (1.09mm)
WARP STRENGTH, lbs/in. 300.0 (136Kg/2.54cm)
FILL STRENGTH, lbs/in. 300.0 (136 Kg/2.54cm)
ABRASION RESISTANCE Good
TEMPERATURE TOLERANCE Up to 1200˚F (650˚C)
CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and
wet Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G32PAA- -00
STYLE: G32PAA- -00
An AMATEX woven thermoglass roving medium weight fabric. Applications include fire
blankets, gasket cloth, welding drop cloth, divider curtains. Resistant to light welding
sparks, splatter, splash, good for reflective heat uses.
32oz. Plain Fibreglass Welding Fabric
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE White
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 32 (1087 gm/sq.m) (Average w/ laminate)
FABRIC THICKNESS, inches 0.044 (1.11 mm)
WARP STRENGTH, lbs/in. 300 (136 Kg/2.54cm)
FILL STRENGTH, lbs/in. 200 (91 Kg/2.54cm)
ABRASION RESISTANCE Good
TEMPERATURE TOLERANCE To 1000˚F (540˚C), higher for very brief periods
CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and
wet Hydrogen Chloride
SOLVENT RESISTANCE Very Good
SUNLIGHT & AGE RESISTANCE Very Good
FINISH NUMBER See Fabric Options data sheet
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G40PAE
STYLE: G40PAE
An AMATEX woven roving thermoglass fabric of a heavy weight in a plain weave.
Applications include all general industrials uses such as blankets, covers and protective
curtains. Resistant to most chemicals, offers thermal protection for temperatures up to
1000˚F (540˚C)
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE White
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 40 (1359 g,/sq.m)
FABRIC THICKNESS, inches 0.051 (1.29mm)
WARP STRENGTH, lbs/in. 275.0 (125 Kg/2.54cm)
FILL STRENGTH, lbs/in. 250.0 (114 Kg/2.54cm)
ABRASION RESISTANCE Good
TEMPERATURE TOLERANCE To 1000˚F (540˚C), Higher for brief periods
CHEMICAL RESISTANCE Excellent except Hydrofluoric acid and hot Phosphoric acid and
wet Hydrogen Chloride
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High dielectric strength, low constants
FINISH NUMBER See Fabric Options data sheet
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G17SIL
STYLE: G17SIL-60
An AMATEX woven fibreglass base fabric impregnated with a high quality silicone.
Finish offers a smooth, slick surface providing for efficient processing in cut and sew
operations. Also used for weather protection. This product is designed for cut & sew
fabrication of high temperature (500˚F / 260˚C) removable pads and covers.
17 oz. Industrial Silicone Impregnated
Fibreglass Cloth
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Silver/grey or Red
AVAILABLE WIDTHS, inches 60” (1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Satin Weave
FABRIC WEIGHT, oz/sq. yd. 17 (578 gm/sq.m)
FABRIC THICKNESS, inches 0.017 (+/-.005”) (0.43mm)
WARP STRENGTH, lbs/in. 300 (136 Kg/2.54cm)
FILL STRENGTH, lbs/in. 300 (136Kg/2.54cm)
ABRASION RESISTANCE Good
TEMPERATURE TOLERANCE
-65 ˚F to 500˚F Continuous
700˚F Intermediate
Base Fabric 1000˚F
Passes NFPA 701 Certification Available
BASE FABRIC CERTIFICATIONS MIL-Y-1140 at additional cost
MIL-I-24244 at additional cost
COATING CERTIFICATIONS MIL-PRF-20696f, section 4.4 testing at additional cost
OIL & HYDROCARBON CERTIFICATION MIL-C-20696f, section 4.4 at additional cost
SOLVENT RESISTANCE n/a
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES n/a
AVAILABLE FINISHES Silver/Grey or Red cured silicone rubber, other colours available
CERTIFICATIONS NFPA 701, ANSI/FM 4950 for curtain
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
G32SIL
STYLE: G32SIL
An AMATEX heavier weight woven fibreglass base fabric impregnated with a high quality
silicone. Applications include equipment and personnel heat shields, splash curtains,
and pipe or duct wrap. Resistant to most chemicals and solvents, weld splatter and light
metal splash.
32 oz. Industrial Silicone Impregnated
Fibreglass Cloth
SPECIFICATIONS
BASE FABRIC Fibreglass
COLOUR / APPEARANCE Silver/grey or Red, both sides
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 25 & 50 (22.8m, 45.7m)
WEAVE STYLE Satin, 8 harness
FABRIC WEIGHT, oz/sq. yd. 32 (1087 gm/sq.m)
FABRIC THICKNESS, inches 0.035 (0.89mm)
WARP STRENGTH, lbs/in. 410 (186 Kg/2.54cm)
FILL STRENGTH, lbs/in. 375 (170Kg/2.54cm)
ABRASION RESISTANCE Very Good
TEMPERATURE TOLERANCE
-65 ˚F to 450˚F Continuous
Base Fabric 1000˚F continuous
Passes NFPA 701 Certification Available
BASE FABRIC CERTIFICATIONS MIL-Y-1140, MIL-I-24244
COATING CERTIFICATIONS MIL-I-24244, ASTM E162; ASTM E84.84a, MIL-C-24567 (SH);
NSN 8305-01-035-1057
OIL & HYDROCARBON CERTIFICATION MIL-C-20696f, section 4.4
SOLVENT RESISTANCE Oil & Hydraulic fluid resistance
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES n/a
AVAILABLE FINISHES Silver/Grey or Red cured silicone rubber, other colours available
CERTIFICATIONS NFPA 701, ANSI/FM 4950 for curtain
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
HTX-600-9N
STYLE: HTX-600-9N
An AMATEX woven continuous filament amorphous silica fabric featuring a proprietary
tan coating. Applications include pad fabrics, valve covers, expansion joints, special
curtain materials and damage control cloth. Resistant to most chemicals, offers good
thermal protection to temperatures up to 1800˚F (990˚C) continuous.
Medium Weight Silica Cloth
SPECIFICATIONS
BASE FABRIC Silica
COLOUR / APPEARANCE Tan
AVAILABLE WIDTHS, inches 36” (0.914m), 60” also available
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Satin, 8 harness
FABRIC WEIGHT, oz/sq. yd. 18
FABRIC THICKNESS, inches 0.034 (0.86mm)
WARP STRENGTH, lbs/in. 250.0 (114 Kg/2.54cm)
FILL STRENGTH, lbs/in. 150.0 (68 Kg/2.54cm)
ABRASION RESISTANCE Very Good
TEMPERATURE TOLERANCE 1800˚F (990˚C), 3000˚F melt temp (1649˚C)
CHEMICAL RESISTANCE Excellent
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High dielectric, low constants
FINISH 9N Tan
CERTIFICATIONS NFPA 701, ANSI/FM 4950 for curtain
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
HTX-1000-9N
STYLE: HTX-1000-9N
A woven continuous amorphous silica fabric featuring a proprietary tan coating.
Applications include pad fabrics, valve and generator covers, curtain materials, and
damage control cloth. Resistant to most chemicals, offers good thermal protection to
temperatures up to 1800˚F (990˚C).
33 oz. Silica Cloth
SPECIFICATIONS
BASE FABRIC Silica
COLOUR / APPEARANCE Tan
AVAILABLE WIDTHS, inches 36” (0.914m) 60” also available
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Satin. 12 harness
FABRIC WEIGHT, oz/sq. yd. 33
FABRIC THICKNESS, inches 0.046 (1.17mm)
WARP STRENGTH, lbs/in. 350.0 (158 Kg/2.54cm)
FILL STRENGTH, lbs/in. 250.0 (114 Kg/2.54cm)
ABRASION RESISTANCE Excellent
TEMPERATURE TOLERANCE 1800°F continuous (990°C) 3000°F melt temp. (1649°C);
CHEMICAL RESISTANCE Excellent
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High dielectric strength, low constants
FINISH NUMBER 9N Tan
CERTIFICATIONS NFPA 701, ANSI/FM 4950 for curtain
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
HTX-1000-8N-AL7
STYLE: HTX-1000-8N-AL7
A woven continuous filament silica fabric featuring a proprietary tan coating & aluminized
one side. Applications include pad fabrics, valve and generator covers, curtain
materials, and damage control cloth. Resistant to most chemicals, offers good thermal
protection to temperatures over 2000˚F
38 oz. Aluminized Silica Cloth
SPECIFICATIONS
BASE FABRIC Silica
COLOUR / APPEARANCE Aluminized one side, tan reverse
AVAILABLE WIDTHS, inches 35” (0.89m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Satin, 12 harness
FABRIC WEIGHT, oz/sq. yd. 38oz.
FABRIC THICKNESS, inches 0.044 (1.09mm)
WARP STRENGTH, lbs/in. 430.00 (195 Kg/2.54m)
FILL STRENGTH, lbs/in. 285.0 (129 Kg/2.54cm)
ABRASION RESISTANCE N/A
TEMPERATURE TOLERANCE 1800°F continuous (990°C) 3000°F melt temp. (1649°C)
BASE FABRIC CERTIFICATIONS Higher than 95% Silica (SiO₂) content
CHEMICAL RESISTANCE Excellent
SOLVENT RESISTANCE Excellent
SUNLIGHT & AGE RESISTANCE Excellent
ELECTRICAL PROPERTIES High dielectric, low constants
FINISH AL7, aluminum laminate one side w/ 8N
CERTIFICATIONS
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
Thermoglass™ Tapes
STYLE: Thermoglass™ Tapes
Industrial quality thermoglass tapes are carefully
woven and sized using fibreglass yarns. It is
recommended that these tapes be used at surface
temperatures ranging from 120˚F to 1000˚F. Typical
uses include lagging of all types, pipe insulation wrap,
electrical insulation and thermal insulation.
Industrial Quality Fibreglass Tapes
SPECIFICATIONS
G12RP372 G29RP372 G31RP372 G52RP372 G100RP372
Tape Thickness 1/32” 1/16” 1/16” 1/8” 1/4”
Width Code Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft.
1/2” 04 0.4 0.8 0.7 1.5 ** 2.6
3/4” 06 0.6 1.3 1.0 2.2 4.1
1” 08 0.7 1.7 1.3* 2.8* 5.5
1.25” 09 0.9 2.1 1.6 3.6 6.7
1.5” 10 1.1 2.5 2.0* 4.2* 8.1
2” 12 1.4 3.4 2.6* 5.6* 10.9
2.5” 14 1.7 4.2 3.3* 7.0* 13.5
3” 16 2.1 5.1 3.9* 8.5* 16.4
3.5” 18 MTO MTO 4.5 9.9 —
4” 20 2.8 6.8 5.2 11.3 21.9
5” 21 3.5 8.5 6.5 14.1 27.3
6” 22 4.2 10.2 7.8 16.9 32.9
7” 46 — 11.8 9.1 19.7 —
8” 23 5.3 13.4 10.4 22.5 43.8
9” 72 — MTO MTO MTO MTO
10” 80 — 28.6 12.6 28.2 54.8
12” 96 — 28.7 14.9 33.2 65.7
** Two 50ft. Rolls packaged together
Drop Warp tape available for G31, G52, G100
Weight and size tolerance +/- 10%
Standard roll lengths, 100ft unless otherwise specified
5 roll minimum 6”-12”
Treatments Available:
* Heat Treatment (Tan colour) *Vermiculite Coating—Temp. 2000˚F
* Pressure Sensitive Tape 1/2” to 3” *Black Graphite
* Dyed Silicone rubber and PTFE Teflon
Product Features: Temperature Tolerance up to 1000˚F
(538˚C)
Will not burn, smolder or support flame
Retains 50% tensile strength at 700˚F and as much as 25% at 1000˚F
Does not stretch or shrink
Highest strength to weight ratio of in-dustrial textiles
Resistant to most chemicals and sol-vents
Fine glass filaments allow for great
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
Vertex Treated Tapes
STYLE: Vertex Tapes
Vertex treated tapes are woven and sized using
fibreglass yarns. The tapes are the coated with
Vertex, a high-temperature vermiculite coating. Uses
include lagging, pipe insulation wrap, electrical
insulation, thermal insulation, gasketing, automotive.
Vertex Treated Fibreglass Tapes
SPECIFICATIONS G19P752 G29RP372 G31RP372 G36P752 G52RP752 G65RP752 G100RP372 G120P752
Tape Thickness 1/32” 1/16” 1/16” 1/16” 1/8” 1/8” 1/4” 1/4”
Width Code Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft.
1” 08 1.0 1.7 1.3 2.1 **2.8 4.2 5.5 9.1
1.5” 10 1.4 2.5 2.0 3.0 4.2 6.2 8.1 13.4
2” 12 1.9 3.4 2.6 4.1 5.6 8.2 10.9 18.2
3” 16 2.9 5.1 3.9 6.2 8.5 12.2 16.4 27.4
4” 20 3.8 6.8 5.2 8.2 11.3 15.2 21.9 36.5
5” 21 4.7 8.5 6.5 10.3 14.1 20.5 27.5 45.6
6” 22 5.7 10.1 7.8 12.3 16.9 24.5 32.9 54.7
7” 46 6.6 11.8 9.1 14.1 19.3 28.4 MTO MTO
8” 23 — 13.4 10.4 16.2 22.5 32.8 43.8 72.9
9” 72 — MTO MTO 17.9 MTO MTO MTO MTO
10” 80 — 28.6 12.6 20.0 28.2 40.6 54.8 MTO
12” 96 — 28.7 14.9 23.3 33.1 48.9 65.7 109.5
** Two 50ft. Rolls packaged together
-Drop Warp tape available for G29 and G52, in some sizes
-Weight and size tolerance +/- 10%
-Standard roll lengths, 100ft unless otherwise specified
-5 roll minimum 6”-12”
Product Features: Direct Flame Tolerance up to 2000˚F
(1093˚C)
Will not burn, smolder or support flame
Does not stretch or shrink
Highest strength to weight ratio of in-dustrial textiles
Vertex treatment available in blue, black, or natural tan.
To order tape, select thickness and width you require. Identify the code number for proper tape width. This is the suffix
of the order part number. Example: you wish to order 1/16” thick tape at a width of 2”. The 1/16” thickness is tape
G29RP372. The width cod for 2” wide tape is 12. Therefore, specify G29RP372-12 tape when placing an order.
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
08TT132
STYLE: 08TT132
A Norfab 100% Kevlar® light weight fabric woven in a twill pattern. Applications include
safety clothing, aprons, cuffs, sleeves, caps and pockets and other garments. Fabric is
UV sensitive.
100% Kevlar® 8 oz. Safety Cloth
SPECIFICATIONS
BASE FABRIC 100% Kevlar®
COLOUR / APPEARANCE Yellow
AVAILABLE WIDTHS, inches 40”, 60” (1.0m, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE 3/1 Left Hand Twill, woven face down
FABRIC WEIGHT, oz/sq. yd. 8.1 (275 gm/sq. m)
FABRIC THICKNESS, inches 0.026 (0.56mm)
WARP STRENGTH, lbs/in. 400 (182 Kg/2.54cm)
FILL STRENGTH, lbs/in. 360 (164 Kg/2.54cm)
ABRASION RESISTANCE Very Good
TEMPERATURE TOLERANCE n/a
CHEMICAL RESISTANCE n/a
SOLVENT RESISTANCE n/a
SUNLIGHT & AGE RESISTANCE Kevlar® yarns are UV sensitive
ELECTRICAL PROPERTIES n/a
AVAILABLE FINISHES n/a
FINISH NUMBER 30 wear resistant, 39 firm hand
CERTIFICATIONS Meets NFPA 1971, 1997
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
08TT132-60-36GR
STYLE: 08TT132-60-36GR
A Norfab 100% Para-Aramid light weight fabric woven in a 3/1 left hand twill pattern,
woven face down. Fabric is coated both sides with medium grey silicone rubber.
Applications include safety clothing, aprons, cuffs, sleeves, caps and pockets , other
garments and cargo covers.
100% Kevlar® 8oz. Safety Fabric
SPECIFICATIONS
BASE FABRIC 100% Para-Aramid
COLOUR / APPEARANCE Grey
AVAILABLE WIDTHS, inches 60” (1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE 3/1 Left Hand Twill, woven face down
FABRIC WEIGHT, oz/sq. yd. 19.5 (665 gm/sq. m)
FABRIC THICKNESS, inches 0.036 (0.76mm)
WARP STRENGTH, lbs/in. 400 (182 Kg/2.54cm)
FILL STRENGTH, lbs/in. 360 (164 Kg/2.54cm)
ABRASION RESISTANCE n/a
TEMPERATURE TOLERANCE
After flame, seconds 2.0
After glow, seconds 2.0
Char length, inches 0.3
CHEMICAL RESISTANCE n/a
SOLVENT RESISTANCE n/a
SUNLIGHT & AGE RESISTANCE Kevlar® yarns are UV sensitive
ELECTRICAL PROPERTIES n/a
FINISH NUMBER 36, medium grey silicone, both sides
CERTIFICATIONS
NOTE: This fabric has passed FAA’s one hour “Igloo Fire Test”
which may allow certain narrow body combi airplane operators to
comply with FAA’s new airworthiness directive #AD-93-07-15.
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
08TT333
STYLE: 08TT333
A Norfab CutPro® Natural light weight twill fabric of a ring spun 100% Kevlar yarn. Used
as cut resistant safety clothing with inherent flame resistance that will never wash or
wear out.
Norfab CutPro® Natural 8 oz. Cloth
SPECIFICATIONS
BASE FABRIC Kevlar®
COLOUR / APPEARANCE Yellow
AVAILABLE WIDTHS, inches 60” (1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE 2/1 Twill
FABRIC WEIGHT, oz/sq. yd. 8 oz. (271 gm/ sq. m)
FABRIC THICKNESS, inches 0.025 (0.63mm)
TENSILE STRENGTH
ASTM D5034 (Grab) W&F) lbs. 430 x 350
CUT RESISTANCE
ANSI/ISEA 105-2016 Level A2
PUNCTURE RESISTANCE
ANSI/ISEA 105-2016 Level 5
ABRASION RESISTANCE TEST
ANSI/ISEA 105-2016 Level 2
CERITIFCATIONS
NFPA 1971, Standard on Protective Ensembles for
Structural Fire Fighting and Proximity Fire Fighting,
2013 Edition
CAN/CGSB 155.1, Standard on Firefighters Protective
Clothing for Protection Against Heat and Flame, 2001
Edition
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
09TT344
STYLE: 09TT344
A Norfab CutPro® Natural light weight twill fabric of a ring spun 100% Kevlar® yarn with
stainless steel wire reinforcement. Used as cut resistant safety clothing with inherent
flame resistance that will never wash or wear out.
Norfab CutPro® Natural 9 oz. Cloth
with Stainless Steel Wire
SPECIFICATIONS
BASE FABRIC Kevlar®/Stainless steel wire
COLOUR / APPEARANCE Yellow
AVAILABLE WIDTHS, inches 60” (1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Twill
FABRIC WEIGHT, oz/sq. yd. 9 oz. +/-7% (305 gm/ sq. m)
FABRIC THICKNESS, inches 0.024 +/- .005 (0.61mm)
TENSILE STRENGTH
ASTM D5034 (Grab) W&F) lbs. 495 x 300
CUT RESISTANCE
ANSI/ISEA 105-2016 Level A4
PUNCTURE RESISTANCE
ANSI/ISEA 105-2016 Level 5
ABRASION RESISTANCE
ANSI/ISEA 105-2016 Level 2
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
10TT366
STYLE: 10TT366
Norfab CutPro® Vintage combines the strength, high thermal capability, cut resistance
and durability of Twaron® with the hardness of stainless steel. The unique composition
of CutPro® Vintage provides outstanding protection against hazards posed by sharp
objects and revolving or reciprocating blades.
Norfab CutPro® Vintage 10oz.
with Stainless Steel Wire
SPECIFICATIONS
BASE FABRIC Twaron®/Stainless Steel Wire
COLOUR / APPEARANCE Yellow with strip
AVAILABLE WIDTHS, inches 60 (1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Twill
FABRIC WEIGHT, oz/sq. yd. 9.5 +/- 7% (322.11 gm./sq. m.)
FABRIC THICKNESS, inches .026 +/- .005 (0.66mm)
TENSILE STRENGTH
ASTM D5034 (Grab) W&F) lbs. 500 x 400
CUT RESISTANCE
ANSI/ISEA 105-2016 Level A6
PUNCTURE RESISTANCE
ANSI/ISEA 105-2016 Level 3
ABRASION RESISTANCE
ANSI/ISEA 105-2016 Level 2
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
22PT338
STYLE: 22PT338
A Norfab woven fabric of an Aramid fibre blend over a fibreglass core yarn. Applications
include safety clothing, gloves, mitts, jackets, curtains, and other industrial applications.
Resistant to heat sources up to 650 ˚F (340˚ C), offers excellent thermal protection.
22 oz. Aramid/Fibreglass cloth
SPECIFICATIONS
BASE FABRIC Aramid / Fibreglass
COLOUR / APPEARANCE Yellow
AVAILABLE WIDTHS, inches 40”, 60” (1.0, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 22 (747 gm/sq. m)
FABRIC THICKNESS, inches 0.70 (+/-.005”) (1.73mm)
WARP STRENGTH, lbs/in. 350 (158 Kg/2.54cm)
FILL STRENGTH, lbs/in. 200 (91 Kg/2.54cm)
ABRASION RESISTANCE Very Good
TEMPERATURE TOLERANCE Up to 650 ˚F
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
22PT30-AL7
STYLE: 22PT30- -AL7
A Norfab medium weight fabric of Aramid fibre blend with fibreglass core yarn,
aluminized one side. Applications include safety clothing, gloves, mitts, jackets, curtains,
and other industrial applications. Resistant to hear sources, offers excellent thermal
protection for safety garments.
22 oz. Aramid/Fibreglass cloth
Aluminized one side
SPECIFICATIONS
BASE FABRIC Aramid / Fibreglass
COLOUR / APPEARANCE Yellow, aluminized 1 side
AVAILABLE WIDTHS, inches 40”, 60”
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Plain
FABRIC WEIGHT, oz/sq. yd. 23 (780 gm/sq. m)
FABRIC THICKNESS, inches 0.062 (+/-.005”) (1.58mm)
WARP STRENGTH, lbs/in. 430 (195 Kg/2.54cm)
FILL STRENGTH, lbs/in. 280 (127 Kg/2.54cm)
Flammability-After Flame (seconds) 0.0
Flammability– Char Length 0.0
Adhesion after Wet Flex Pass
Reflectivity after Abrasion (seconds) 39
RPP Rating (cal/cm²) 78
Taber Abrasion 1400
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
Norfab 400 Series Tapes
STYLE: Norfab Tapes
Carefully woven using Para-Aramid fibre blends over
fibreglass core yarn. Typical uses include lagging,
pipe insulation wrap, electrical insulation, thermal
insulation, gasketing.
Para-Aramid Tapes
SPECIFICATIONS
N11P400 N22P400 N44P400 N88P400
Tape Thickness 1/32” 1/16” 1/8” 1/4”
Width Code Lbs/100ft. Lbs/100ft. Lbs/100ft. Lbs/100ft.
1/2” 04 0.32 0.54 **1.20 **2.28
3/4” 06 0.45 0.85 1.73 *3.33
1” 08 0.60 1.11 2.33 4.55
1.5” 10 0.90 1.66 3.41 6.91
2” 12 1.21 2.22 4.49 9.25
2.5” 14 1.50 2.78 5.58 11.61
3” 16 1.82 3.33 6.66 13.90
4” 20 *2.42 4.45 *9.05 18.67
5” 21 *3.02 5.55 *11.22 23.37
6” 22 *3.63 6.66 *13.39 27.54
7” 46 4.23 7.77 15.72 32.09
8” 23 4.83 8.88 18.05 36.64
9” 72 — 9.99 20.3 41.19
10” 80 — 11.11 22.71 45.74
11” 88 — 12.21 25.04 50.29
12” 96 — 13.32 27.37 54.84
** Two 50ft. Rolls packaged together
Weight and size tolerance +/- 10%
Notes:
- Roll lengths 100 feet unless otherwise specified
- Pressure Sensitive Adhesive (PSA) available up to 3” wide
To order tape, select thickness and width you require. Identify the code number for proper tape width. This is the
suffix of the order part number. Example: you wish to order 1/16” thick tape at a width of 2”. The 1/16” thickness
is tape N22P400. The width cod for 2” wide tape is 12. Therefore, specify N22P400-12 tape when placing an
order.
Product Features: Heat Resistance up to 650˚F (340˚C)
DREF yarn construction
Excellent strength and abrasion resis-tance
Good flexibility
Good chemical resistance
Excellent Mildew resistance
Synthetic blend
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
05WKRS1-AL7
STYLE: 05WKRS1- -AL7
A Norfab knit light weight fabric of an Aramid fibre blend over a carbon core yarn (carbon
kevlar), aluminum laminate one side. Applications include light weight safety clothing,
mitts, gloves, jacket liner, and other industrial applications. Resistant to moderate heat
sources, offers good thermal protection for safety garments.
7.5oz. Aramid Carbon Aluminized Fabric
SPECIFICATIONS
BASE FABRIC Aramid cover with OPF insert
COLOUR / APPEARANCE Light green, aluminized 1 side
AVAILABLE WIDTHS, inches 40”, 60” (1.0, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Knit
FABRIC WEIGHT, oz/sq. yd. 7.5 (255 gm/sq.m.)
FABRIC THICKNESS, inches 0.023 (0.58mm)
WARP STRENGTH, lbs (1” unravelled) 82 (37.20 Kg)
FILL STRENGTH, lbs (1”unravelled) 21 (9.53 Kg)
FLAMMABILITY-AFTER FLAME, sec-
onds 0
FLAMMABILITY CHAR LENGTH,
inches 0
Adhesion after Wet Flex Pass
Reflectivity after Abrasion, seconds 28
RPP Rating (cal/cm²) 55
Taber Abrasion 1100
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
11HT156-AL7
STYLE: 11HT156- -AL7
A Norfab knit medium weight fabric of an Aramid fibre blend over an oxidized PAN(OPF)
core yarn , aluminum laminate one side. Applications include safety clothing, mitts,
gloves, jackets, curtains and other industrial applications. Resistant to radiant heat
sources, offers excellent thermal protection for safety garments. Recommended for
molten metal splash protection.
14oz. Aramid Carbon Aluminized Fabric
SPECIFICATIONS
BASE FABRIC Aramid cover with OPF insert
COLOUR / APPEARANCE Light green, aluminized 1 side
AVAILABLE WIDTHS, inches 40”, 60” (1.0, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Herringbone Twill
FABRIC WEIGHT, oz/sq. yd. 14 (475 gm/sq.m.)
FABRIC THICKNESS, inches 0.034 (0.86mm)
WARP STRENGTH, lbs 177 (80.29 Kg)
FILL STRENGTH, lbs 104 (47.17 Kg)
FLAMMABILITY-AFTER FLAME,
seconds 0
FLAMMABILITY CHAR LENGTH,
inches 0.3
Adhesion after Wet Flex Pass
Reflectivity after Abrasion, seconds 28
RPP Rating (cal/cm²) 55
Taber Abrasion 2100
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
11HT156-42.5-30
STYLE: 11HT156-42.4-30
A Norfab knit medium weight fabric of an Aramid fibre blend over an oxidized PAN(OPF)
core yarn. Applications include safety clothing, mitts, gloves, jackets, curtains and other
industrial applications. Resistant to reflected heat sources, offers excellent thermal
protection for safety garments.
11oz. Plain Aramid Carbon Fabric
SPECIFICATIONS
BASE FABRIC Aramid/OPF
COLOUR / APPEARANCE Light green
AVAILABLE WIDTHS, inches 42.5”, 60” (1.08m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Herringbone Twill
FABRIC WEIGHT, oz/sq. yd. 11 (374 gm/sq.m.)
FABRIC THICKNESS, inches 0.040 (+/-0.5”) (0.94mm)
WARP STRENGTH, lbs/in. 175 (80Kg/2.54cm)
FILL STRENGTH, lbs/in. 120 (55Kg/2.54cm)
ABRASION RESISTANCE Excellent
FINISH NUMBER 30, Wear Resistant
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
16HT65-AL7
STYLE: 16HT65-AL7
A Norfab knit heavy weight fabric of an Aramid fibre blend over an oxidized PAN(OPF)
core yarn , aluminum laminate one side. Applications include safety clothing, mitts,
gloves, jackets, curtains and other industrial applications. Resistant to radiant heat
sources, offers excellent thermal protection for safety garments. Recommended for
molten metal splash protection.
19oz. Aramid Carbon Aluminized Fabric
SPECIFICATIONS
BASE FABRIC Aramid/OPF
COLOUR / APPEARANCE Light green, aluminized 1 side
AVAILABLE WIDTHS, inches 40”, 60” (1.0, 1.5m)
ROLL LENGTH, yards 50 (45.7m)
WEAVE STYLE Herringbone Twill
FABRIC WEIGHT, oz/sq. yd. 19 (644 gm/sq.m.)
FABRIC THICKNESS, inches 0.045 (1.14mm)
WARP STRENGTH, lbs 256 (116.12 Kg)
FILL STRENGTH, lbs 168(76.20 Kg)
FLAMMABILITY-AFTER FLAME,
seconds 0
FLAMMABILITY CHAR LENGTH,
inches 0.2
Adhesion after Wet Flex Pass
Reflectivity after Abrasion, seconds 32
RPP Rating (cal/cm²) 64
Taber Abrasion 1700
-
1200 Speers Rd. Unit #2. Oakville, Ontario, Canada. L6L 2X4
Phone: (905) 842-7627 Web: www.intertex.ca
Fax: (905) 842-7704 E-mail: [email protected]
FINISH NAME ABRREVIATION DESCRIPTION
00 Plain Untreated PL Loom stage of greige fabric
30 Wear Resist WR Improves fabric abrasion resistance
31 Heat Treated HT Removes most fibre starches and oils, fabric
takes a natural tan appearance.
34 Rewet Adhesive RA Rewettable fabrication adhesive
35 Flame Retardent FR Prevents fabric flame support
36 Silicone Rubber SR One or Two side coat of silicone rubber
39 Firm Hand FH Improves fabric stability and creates a stiffer
fabric
40 Form Hand with
Water/Oil repel FH-WO Firm hand with water and oil repellency
41 Water/Oil repel WO Water and oil repellency
42 Heat Treat + PVC HT-PV Heat treated fabric with PVC fibre binder
43 PVC coated PV PVC applied to bind woven fibres
45 Tacky Cloth TK1 Facilitates multiple layer fabrications of gaskets
and similar items
46 Dutchpro DP-YL Yellow neoprene coating on one side
47 Combo 31+35 HT-FR Heat Treated, Flame Retardant
48 Combo 35 + Colour FR-(colour) Flame retardant with colour
49 Combo 31+32 HT-WS Heat treated w/ weave set coating
50 Combo 31+Vert.903N HT-9N Heat treated w/ 9N vertex
51 Combo 31+729N HT-7N Heat treated w/ 7N vertex
52 Weldpro W-BK Black coating for welding fabric
53 Clear Acrylic CA Fibre binder for cutting and fabrication
56 Neoprene NE-(colour) Fabric coated both sides with neoprene
57 Combo 56+BK+VP NE-BK-VP Black neoprene with vertex powder
7B Vertex 729 Blue 7B Proprietary high temp. vermiculite coating
7N Vertex 729 Natural 7N Proprietary high temp. vermiculite coating
9B Vertex 903 Blue 9B Proprietary high temp. vermiculite coating
9N Vertex 903 Natural 9N Proprietary high temp. vermiculite coating
AL Aluminum Laminate AL Aluminum one side
FINISH OPTIONS