CORROSION

James Instruments Inc. specialises in Non-Destructive Testing equipment for concrete and other construction materials. Central to theimprovement of the construction infrastructure are tools that evaluate the condition of existing construction. Destructive and Non-DestructiveTesting (NDT) techniques are applied. Destructive tests can provide direct information, but are relatively expensive, time-consuming and causedamage to the structure. Destructive test results often cannot be evaluated using statistical approaches because the number of locations in thestructure that can be tested without damage to the structure is limited. On the other hand, Non-Destructive Testing (NDT) techniques are relativelyinexpensive to apply, and they can detect, localize, and characterize flaws and damage in concrete, wood and other construction materialstructures without leaving any undesirable discontinuities or causing damage to concrete members.

STR

EN

GTH

L

OC

ATO

RS

ULT

RA

SO

NIC

S

CO

RR

OSIO

N

MO

ISTU

RE

www.NDTjames.comemail: info@NDTjames.com800-426-6500 • 773-463-65653727 N. Kedzie Ave., Chicago, IL 60618

www.NDTjames.euemail: europe@NDTjames.eu

+31 (0)548 659032Windmolen 22, 7609 NN Almelo

The Netherlands

Test Well.Build Well.

Gecor 8™Advanced Rebar Concrete CorrosionRate System.

C-CS-8300 – Gecor 8™ Complete System

Cor-Map™

Cor-Map II™Ohmcorr™Concrete Half-CellPotential Systemsfor Locating Areasof Rebar Corrosion.Cor-Map II includesdigital Mapping feature and PC Software.Ohmcorr is a concrete resistivity systemused in conjunction with the Cor-Mapand Cor-Map II

C-CM-5000 – Cor-Map II™ Complete Systemfor Half-Cell Potential

C-CM-4000 – Cor-Map™ Complete System forHalf-Cell Potential

C-RM-8000 – Ohmcorr™ Resistivity System

Porosiscope™Determines airand waterpermeability inconcrete both atand below thesurface

ASR Detect™, Carbo Detect™Chemical indicator system for testing forASR and Carbonation

I-AS-3000 – ASR Detect™ Complete SystemI-CB-6000 – Carbo Detect™ Complete System

Air Meters for Fresh ConcreteASTM Type B and other Air MetersavailableA-AB-1200 – ASTM Type ‘B’ Air meter

CholrimeterField Test System for determination ofchloride concentrations in constructionmaterials

C-CL-3000 – Chlorimeter™ Complete System(does not include extraction liquids)C-CL-2012 – Pack of 12 extractions liquidsC-CL-2096 – Pack of 100 jars of extractionliquids

C-P-6050 – Porosiscope™ Complete System(plugs not included)

C-P-6060 – Pack of 25 Test Plugs

FOR CONSTRUCTION MATERIALS

REBAR LOCATORS

ULTRASONIC

MOISTURE

Windsor® Probe Test SystemMost Advanced System ForCompressive Strength Testing ofStandard and High PerformanceConcrete.

Z-WP-1000 – Windsor® HP Probe System(system does not include probes)Z-WP-534 – Windsor® Probe ManualSystem (system does not include probes)U-PRS-01 – 75 Silver Probes & 75 PowerLoads for Testing Standard Density ConcreteU-PRS-03 – 75 Gold Probes & 75 PowerLoads for Testing Lightweight Concrete

Windsor® Pin Test SystemFor Strength Testing of Concrete, Brickand Mortar Features Special Chuck forMortar Joint.

W-P-2000 – Complete Windsor® Pin System(system does not include pins)W-P-1040 – Case of 40 Hardened Steel Pinsfor Windsor® Pin System

V-Meter MK IV™

Ultrasonic Pulse Velocity SystemFor Finding Voids and Cracks,and Determining Other MaterialProperties

V-C-400 – V-Meter MK IV™Complete SystemV-C-401 – V-Meter MK IV™ Systemw/o Software, include two 54KHztransducers

Aggrameter™For instantaneousdetermination of themoisture content ofsand, fine aggregateand coarse aggregateusing a uniquemicrowave sensor

T-T-100 – Aggrameter ™Complete System

Aquameter™Moisture Meter forConcrete, Brick,Masonry, Wood andOther ConstructionMaterials

T-M-170 – Aquameter ™

Aquaprobe™

Advanced Microwave Soil Moisture Meter for Professional Use

T-S-30 – Aquaprobe ™Soil Moisture MeterComplete SystemT-S-35 – Aquaprobe ™Soil Moisture MeterBasic System

Cementometer™Hand Held MicrowaveMoisture Meter forWater/Cement Ratios of FreshConcrete

T-C-20 – Cementometer™ Type LComplete for Low w/c Ratios

T-C-10 – Cementometer™ Type RComplete for Normal Range w/cRatios

Emodumeter™For Resonant Frequency Testing Determining Young'sModulus( E) and Poisson's Ratio

V-E-400 –CompleteEmodumeter™System

TransducersA complete line of lowfrequency transducersare available for everyneed.

Vu-Con®

Impact Echo SystemFor Field Evaluationof ConcreteStructures andConcrete ThicknessDetermination

V-V-100 – Vu-Con®

Complete System

Rebarscope®

Advanced System for RebarLocation and Bar Size Determination.The unit is also capable of locatingnon ferrous metals as well such ascopper, aluminium, some stainlesssteels, wire, and more!R-C-410 – Rebarscope® CompleteSystem includes Scan Cart andRebarlinx™ SoftwareR-C-400 – Rebarscope® Basic System

Mini R-Meter™

Economic System forRebar Location

R-HR-8100 – Mini R-Meter™ CompleteSystem with PCSoftwareR-HR-8000 – Mini R-Meter™ Basic System

James Bond Test™ MK IIIFor Testing Tensile Strength of Overlays,and Overlayments

P-C-7300 – James Bond Test™ Mark III CompleteSystem

ReboundHammers

Strength Testing for Concrete, manualand digital versions available, low impactand high impact strength available.Digital Hammers include Reboundlinxsoftware for data transfer.

W-D-2000 /W-D-2005 – Complete DigitalRebound Hammer for Standard/Low ImpactW-D-1500 /W-D-1505 – Basic DigitalRebound Hammer for Standard/Low ImpactW-M-250/W-M-255 – Standard ImpactManual Rebound Hammer/Low ImpactManual Rebound HammerW-C-7312 – Test Anvil to Calibrate ReboundHammers

www.NDTjames.com • www.NDTjames.eu www.NDTjames.com • www.NDTjames.eu

STRENGTH TESTING

Anchor Test SystemsMeasures a wide range of anchorstrengths in construction materials.

P-C-7280 – Standard Anchor Test Kit for LoadVerificationP-C-7281 – Standard Anchor Test Kit forTesting Load FailureP-C-7290 – Super Anchor Test System

REBAR LOCATORS

ULTRASONIC

MOISTURE

Windsor® Probe Test SystemMost Advanced System ForCompressive Strength Testing ofStandard and High PerformanceConcrete.

Z-WP-1000 – Windsor® HP Probe System(system does not include probes)Z-WP-534 – Windsor® Probe ManualSystem (system does not include probes)U-PRS-01 – 75 Silver Probes & 75 PowerLoads for Testing Standard Density ConcreteU-PRS-03 – 75 Gold Probes & 75 PowerLoads for Testing Lightweight Concrete

Windsor® Pin Test SystemFor Strength Testing of Concrete, Brickand Mortar Features Special Chuck forMortar Joint.

W-P-2000 – Complete Windsor® Pin System(system does not include pins)W-P-1040 – Case of 40 Hardened Steel Pinsfor Windsor® Pin System

V-Meter MK IV™

Ultrasonic Pulse Velocity SystemFor Finding Voids and Cracks,and Determining Other MaterialProperties

V-C-400 – V-Meter MK IV™Complete SystemV-C-401 – V-Meter MK IV™ Systemw/o Software, include two 54KHztransducers

Aggrameter™For instantaneousdetermination of themoisture content ofsand, fine aggregateand coarse aggregateusing a uniquemicrowave sensor

T-T-100 – Aggrameter ™Complete System

Aquameter™Moisture Meter forConcrete, Brick,Masonry, Wood andOther ConstructionMaterials

T-M-170 – Aquameter ™

Aquaprobe™

Advanced Microwave Soil Moisture Meter for Professional Use

T-S-30 – Aquaprobe ™Soil Moisture MeterComplete SystemT-S-35 – Aquaprobe ™Soil Moisture MeterBasic System

Cementometer™Hand Held MicrowaveMoisture Meter forWater/Cement Ratios of FreshConcrete

T-C-20 – Cementometer™ Type LComplete for Low w/c Ratios

T-C-10 – Cementometer™ Type RComplete for Normal Range w/cRatios

Emodumeter™For Resonant Frequency Testing Determining Young'sModulus( E) and Poisson's Ratio

V-E-400 –CompleteEmodumeter™System

TransducersA complete line of lowfrequency transducersare available for everyneed.

Vu-Con®

Impact Echo SystemFor Field Evaluationof ConcreteStructures andConcrete ThicknessDetermination

V-V-100 – Vu-Con®

Complete System

Rebarscope®

Advanced System for RebarLocation and Bar Size Determination.The unit is also capable of locatingnon ferrous metals as well such ascopper, aluminium, some stainlesssteels, wire, and more!R-C-410 – Rebarscope® CompleteSystem includes Scan Cart andRebarlinx™ SoftwareR-C-400 – Rebarscope® Basic System

Mini R-Meter™

Economic System forRebar Location

R-HR-8100 – Mini R-Meter™ CompleteSystem with PCSoftwareR-HR-8000 – Mini R-Meter™ Basic System

James Bond Test™ MK IIIFor Testing Tensile Strength of Overlays,and Overlayments

P-C-7300 – James Bond Test™ Mark III CompleteSystem

ReboundHammers

Strength Testing for Concrete, manualand digital versions available, low impactand high impact strength available.Digital Hammers include Reboundlinxsoftware for data transfer.

W-D-2000 /W-D-2005 – Complete DigitalRebound Hammer for Standard/Low ImpactW-D-1500 /W-D-1505 – Basic DigitalRebound Hammer for Standard/Low ImpactW-M-250/W-M-255 – Standard ImpactManual Rebound Hammer/Low ImpactManual Rebound HammerW-C-7312 – Test Anvil to Calibrate ReboundHammers

www.NDTjames.com • www.NDTjames.eu www.NDTjames.com • www.NDTjames.eu

STRENGTH TESTING

Anchor Test SystemsMeasures a wide range of anchorstrengths in construction materials.

P-C-7280 – Standard Anchor Test Kit for LoadVerificationP-C-7281 – Standard Anchor Test Kit forTesting Load FailureP-C-7290 – Super Anchor Test System

CORROSION

James Instruments Inc. specialises in Non-Destructive Testing equipment for concrete and other construction materials. Central to theimprovement of the construction infrastructure are tools that evaluate the condition of existing construction. Destructive and Non-DestructiveTesting (NDT) techniques are applied. Destructive tests can provide direct information, but are relatively expensive, time-consuming and causedamage to the structure. Destructive test results often cannot be evaluated using statistical approaches because the number of locations in thestructure that can be tested without damage to the structure is limited. On the other hand, Non-Destructive Testing (NDT) techniques are relativelyinexpensive to apply, and they can detect, localize, and characterize flaws and damage in concrete, wood and other construction materialstructures without leaving any undesirable discontinuities or causing damage to concrete members.

STR

EN

GTH

L

OC

ATO

RS

ULT

RA

SO

NIC

S

CO

RR

OSIO

N

MO

ISTU

RE

www.NDTjames.comemail: info@NDTjames.com800-426-6500 • 773-463-65653727 N. Kedzie Ave., Chicago, IL 60618

www.NDTjames.euemail: europe@NDTjames.eu

+31 (0)548 659032Windmolen 22, 7609 NN Almelo

The Netherlands

Test Well.Build Well.

Gecor 8™Advanced Rebar Concrete CorrosionRate System.

C-CS-8300 – Gecor 8™ Complete System

Cor-Map™

Cor-Map II™Ohmcorr™Concrete Half-CellPotential Systemsfor Locating Areasof Rebar Corrosion.Cor-Map II includesdigital Mapping feature and PC Software.Ohmcorr is a concrete resistivity systemused in conjunction with the Cor-Mapand Cor-Map II

C-CM-5000 – Cor-Map II™ Complete Systemfor Half-Cell Potential

C-CM-4000 – Cor-Map™ Complete System forHalf-Cell Potential

C-RM-8000 – Ohmcorr™ Resistivity System

Porosiscope™Determines airand waterpermeability inconcrete both atand below thesurface

ASR Detect™, Carbo Detect™Chemical indicator system for testing forASR and Carbonation

I-AS-3000 – ASR Detect™ Complete SystemI-CB-6000 – Carbo Detect™ Complete System

Air Meters for Fresh ConcreteASTM Type B and other Air MetersavailableA-AB-1200 – ASTM Type ‘B’ Air meter

CholrimeterField Test System for determination ofchloride concentrations in constructionmaterials

C-CL-3000 – Chlorimeter™ Complete System(does not include extraction liquids)C-CL-2012 – Pack of 12 extractions liquidsC-CL-2096 – Pack of 100 jars of extractionliquids

C-P-6050 – Porosiscope™ Complete System(plugs not included)

C-P-6060 – Pack of 25 Test Plugs

FOR CONSTRUCTION MATERIALS