Technical specification: Renishaw Metrology Fixturing

Renishaw metrology fixturingYour single source for modular and custom fixturing

Technical specification

Find our digital catalogue and additional product information online, at www.renishaw.com/fixtures

Browse and buy components and accessories online 24/7, atwww.renishaw.com/shop

Do you have any questions or want to discuss your metrology fixturing solution further? Get in touch with your local sales office on 1-800-847-6045

Contents

Your partner in precision ..........................................................................................5

Why choose Renishaw fixtures? .............................................................................7

Your fixture application.............................................................................................9

Fixturing solutions ..................................................................................................11

Metrology fixture tables ......................................................................................................... 11

FixtureBuilder software ......................................................................................................... 12

Custom designed fixtures ...................................................................................................... 13

QuickLoad™ rail system ....................................................................................................... 14

QuickLoad™ corner (QLC) .................................................................................................... 16

Interchangeable vision fixture (IVF)....................................................................................... 16

Fixture kits ...............................................................................................................19

Steps to building the right fixture kit ...................................................................................... 19

Fixture base plates ..................................................................................................20

Choosing the correct fixture base plate ................................................................................ 20

CMM base plates ................................................................................................................. 21

Vision base plates ................................................................................................................. 22

Vision base plates continued ................................................................................................ 23

Equator™ gauging system base plates ................................................................................ 23

CMM and Equator™ gauging system component sets .......................................24

M4 CMM and Equator system component set: Clamping ..................................................... 24

M6 CMM and Equator system component sets: Clamping ................................................... 25

M6 CMM and Equator system component sets: Magnetic and clamping ............................. 26

M8 CMM and Equator system component sets: Clamping ................................................... 27

M8 CMM and Equator system component sets: Magnetic and clamping ............................. 28

1/4-20 CMM and Equator component sets: Clamping ............................................................ 29

1/4-20 CMM and Equator system component sets: Magnetic and clamping .......................... 30

Vision component sets ...........................................................................................31

M4 vision component sets ..................................................................................................... 31

M6 vision component set ...................................................................................................... 32

1/4-20 vision component sets ................................................................................................. 33

Modular fixturing components ...............................................................................35

Renishaw metrology fixturing | www.renishaw.com/fixtures 5

Your partner in precision

Welcome to RenishawAs one of the world’s leading engineering and scientific technology companies, Renishaw has expertise in precision

measurement, healthcare and metal additive manufacturing (also referred to as 3D printing).

Green lights everywhereWe exist to help our customers achieve new levels of precision, efficiency and profitability.

All of our work is based on a single-minded determination to drive out sources of process variation, enhance precision control

and extend the boundaries of metrology.

As manufacturers ourselves, we understand the need for optimum productivity, which is why we are dedicated to reliability in

our products and unquestioning support and service in our solutions.

We aim now, as we have always done, to be the first and the best in metrology, so that, when you walk around your

manufacturing facilities, you see the universal sign that your business is running smoothly: green lights everywhere.

Extreme accuracy

Producing ever more precise measurement technology and improved manufacturing techniques are challenges, we believe,

that require a certain ethos and way of working.

We have always been a research and development-focussed business that seeks every possible opportunity - both incremental

and revolutionary - to bring greater reliability, accuracy and control to manufacturing.

We do these things because we know our customers need to rely on someone obsessive about every detail. Someone who

will still be able to provide support for a product that’s decades old. Someone who’ll chase microns so customers can run their

business with confidence.

RepeatabilityWhatever your business, process variation is an important consideration. It could cost you contracts, market share and

customers. It can cause waste, delay, overstaffing and it compromises traceability. All of which prevent you achieving the right

level of cost, quality and profitability.

“We have a fundamental belief that metrology isn’t just an eliminator of variation but an enabler of new capabilities.”

Sir David McMurtry, Co-founder and Executive Chairman, Renishaw plc


Why choose Renishaw fixtures?

Renishaw metrology fixtures will give you the clear advantage

• Our large range of modular fixturing components and custom design capabilities provides a solution for any application

and parts of almost any size, shape or material.

• Most components are hand-tightened and require no special tools, making fixturing set-ups quick and easy.

• Set-ups can be documented and repeated with speed and precision using our alpha-numerically labelled base plates.

• Unrivalled durability and wear resistance with Renishaw’s heat treated steel components and Nituff® hardcoat anodised

base plates.

• Improved productivity during part inspection with Renishaw’s FixtureBuilder software; create fixturing set-ups, provide

documentation and assist off-line programming.

• Maximum flexibility when fixturing with a wide choice of base plates and components available in M4, M6 and M8 metric

and 1/4-20 imperial thread sizes.

Available online 24/7

As well as ordering metrology fixturing through your local sales

representative, you can also purchase our modular fixturing

components and FixtureBuilder software through the Renishaw

Web shop. It’s never been so quick, convenient and easy to

order your parts, spares and accessories.

Renishaw’s Web shop hosts a range of modular fixturing

designed for CMMs, vision systems and the Equator™ gauging

system. Parts and accessories for Renishaw’s products can be

purchased online 24/7, or a quote can be requested by visiting

www.renishaw.com/shop

Perfect your process control

Within Renishaw’s industry recognised Productive Process

Pyramid™ framework for process control, the 'post-process

monitoring' phase is the final step to ensure effective end-

to-end metrology. It is within this phase that consideration

needs to be given to the fixturing solution to maximise the

effectiveness of a CMM, vision machine or flexible gauge.

There are many benefits that the correct use of metrology

fixturing can bring to your inspection process such as

repeatability and reproducibility, part positioning and

productivity, and cost reduction.


Your fixture application

Fixtures for co-ordinate measuring machines (CMMs)

Whether you are inspecting parts for aerospace, automotive, electronics, industrial or

medical applications, Renishaw CMM fixtures can provide a full solution to your CMM

fixturing requirements.

The range includes fixture plates with M4, M6, M8 or 1/4-20 threaded fittings in a wide choice

of standard sizes, and an extensive selection of easy-to-use modular fixturing components.

Perfect fixturing solutions can be assembled very quickly to increase throughput and avoid

downtime in inspection.

Renishaw CMM fixtures can improve the throughput, reproducibility and accuracy of your

inspection process by providing quick and repeatable fixturing set-ups for your components.

Renishaw CMM fixtures are modular and can be expanded with your requirements to

provide a complete fixturing solution for any part regardless of its size, shape or material.

Fixtures for Equator™ gauging system

The loading and positive engagement of the Renishaw Equator system fixtures base plate

allows for a quick changeover of parts, on and off the Equator system, within seconds. Each

fixture is repeatedly located and securely held in place with a unique 3-point kinematic

system.

Multiple holes on the base plate ensure flexibility for fixturing a range of parts. Each plate is

alphanumerically labelled so that the set-up can be recorded and documented, allowing the

user to repeat the set-up quickly and accurately.

Fixturing components can be easily threaded into the base plate and positioned for minimal

contact on and around the part. This provides an unobstructed probe path and the ability to

inspect every detail on the part.

Fixtures for vision systems

Renishaw’s multi-hole and multi-window precision acrylic base plates allow for backlighting

and a clear, clean view of the part. Fixturing components can quickly be threaded into the

base plate and arranged in any configuration, allowing the part to be held in a virtually

free state with very little force applied to the surface. The part can be viewed easily without

obstruction to the backlight or probe path. Fixturing components can be placed within a tight

circumference to hold and locate the smallest of parts.

Renishaw’s vision fixtures offer two unique fixturing solutions designed to fit your specific

vision system or multi-sensor machine:

• QuickLoad™ corner (QLC)

• Interchangeable vision fixture (IVF)

Each system uses an acrylic base plate that allows for the use of backlighting for a clear

view of the part on your vision system.


Fixturing solutions

Metrology fixture tables

Compatible with any portable CMM, white light or laser system, our metrology tables give you the freedom to move about your workshop or metrology inspection area with ease.

The modular construction of Renishaw’s metrology tables provide flexibility to

mount portable CMMs. Improve your inspection process with our metrology

tables and discover the following benefits:

Stability: Every fixture plate is secured to the metrology table frame with

mounting holes, adding to the stability and rigidity of the table. This also allows

users to mount heavy parts to the table without the top plate flexing or distorting.

Portability: Each table is fitted with levelling casters for easy height adjustments

and manoeuvrability around your metrology or inspection area.

Repeatability: The fixture plates are precision ground and hard coat anodised

to resist scratching and increase durability. All plates come with alpha-numeric

labelling as standard, for correctly documenting each fixture setup.

Compatibility: Fixture your parts using individual modular fixturing components

or a custom fixture. Ordering one of our universal adapter plates (R-PAACU) will

allow for fitment of any Faro, Romer or Nikon portable CMMs.

No downtime: Our metrology tables come fully assembled, just un-crate and

start measuring.

Designed to suit your needs: Metrology fixture tables are available in any size

to suit your requirements. Base plates are available in both a clear hard coat or

black hard coat anodised finish (black finish ideal for vision related applications).

Renishaw’s metrology fixture tables are available in both standard sizes (see

table below) or custom sizes with fully customisable options such as drawers,

shelves and monitor or laptop brackets.

Contact your local sales representative for more information or visit

www.renishaw.com/fixturetable

Part number Thread Height Width Depth Thread spacing

R-TM-1200900-25-6 M6 914 mm 1200 mm 900 mm 25 mm

R-TM-1500900-25-6 M6 914 mm 1500 mm 900 mm 25 mm

R-TM-18001200-25-6 M6 914 mm 1800 mm 1200 mm 25 mm

R-TM-1200900-30-8 M8 914 mm 1200 mm 900 mm 30 mm

R-TM-1500900-30-8 M8 914 mm 1500 mm 900 mm 30 mm

R-TM-18001200-30-8 M8 914 mm 1800 mm 1200 mm 30 mm

R-TM-4836-1-20 1/4-20 36 in 48 in 36 in 1 in

R-TM-6036-1-20 1/4-20 36 in 60 in 36 in 1 in

R-TM-7248-1-20 1/4-20 36 in 72 in 48 in 1 in

N.B. Don't forget to order a universal adapter plate R-PAACU to allow fitment of any Faro, Romer or Nikon portable CMM to your metrology table

(see page 60). Contact your local sales representative for a black finish plate top.

Standard sized metrology fixture tables

12

FixtureBuilder software

Renishaw’s FixtureBuilder is a 3D-modelling software package designed to allow the creation and documentation of fixturing set-ups. It can also be used to assist with offline programming.

Easy to use: All standard base plates and fixturing components are conveniently organised into tabbed catalogues, grouped

by component category and thread size.

Flexible: Users can create custom fixturing set-ups and components, e.g. custom plates, and store them in user-defined

libraries for future use and reference.

Less time offline: You can export the part and the fixture together. This can greatly reduce editing when programming offline in

your CMM or vision software, where fixturing components could interfere with probe clearances.

Try before you buy and download a free trial online at www.renishaw.com/fixturebuilderdownload

Intelligent ‘Drag and drop’ functionality

Simply drag and drop the components

onto a plate or another component. The

*SmartSnap® technology automatically

aligns them while indicating the mating

hole, X, Y and Z co-ordinates.

Full CAD compatibility

FixtureBuilder offers the ability to import

and export most common 3D CAD files.

An additional translator module for CATIA,

Pro/E, UGNX, Solidworks® and Inventor® is

also available for purchase.

Compliance and quality standards

The ‘Build it’ function is one of the key

benefits to all FixtureBuilder software

users. It allows the automated production

of a complete bill of materials and work

instructions for every fixture set-up.

Renishaw’s FixtureBuilder software has improved our ability to programme off-line. The software

package enables us to build and export fixture set-ups using 3D models, which we then use to

create inspection programmes before the part is ready. In some cases, before the part has even

been manufactured! We can work from a 3D model in FixtureBuilder to create the fixture, and use

this model to programme well ahead of time..

Tritech Precision Products Yeovil (UK)

*SmartSnap®, TriBall® are registered trademarks of IronCAD


Custom designed fixtures

If Renishaw’s standard range of modular fixturing does not meet your requirements, we can provide you with custom fixtures for your CMM, vision or Equator™ gauging system.

Custom fixturing applications are used across a variety of industries

from aerospace to automotive and medical to precision manufacturing.

Renishaw’s engineers will design and build a custom fixture best suited

to your requirements. All aspects of the application are taken into

consideration, including:

• How frequently the part will be measured

• The type of material, size and shape of the part

• The dimensions and tolerances of the part

• The datums or orientation of the part

• The weight and size of the fixture

To enable us to provide the best solution, you can submit your

pictures, parts, drawings and CAD files for review to your local sales

representative.

Custom fixtures can also be designed to include our QuickLoad rail

system for CMM and QuickLoad corners for vision applications.

For more information, please contact your local sales office or complete

a custom fixture request form by visiting

www.renishaw.com/customfixture

14

QuickLoad™ rail system

The QuickLoad rail system allows for increased speed and flexibility, while maintaining repeatability and reproducibility when loading and locating base plates onto a CMM.

The QuickLoad rail (QLR) system is rapid, easy and repeatable,

allowing the user to set up parts for inspection on multiple

plates, and load them to the rail efficiently to maximise

throughput. Due to the simplicity of its application, it requires

no additional training, so you will be up and running without

disruption to your inspection process.

The specially designed QuickLoad base plates locate to the QuickLoad rail, on either side, using quick release magnets and

locating pins. This design ensures the plates are located and secured for maximum throughput and unrivalled repeatability. This

technology gives users the ability to inspect and release parts swiftly.

The QuickLoad rail’s versatile system allows for flexibility when setting up your parts for measurement and provides a robust

work-holding solution. It's universal mounting design allows for fitment to any CMM machine.

The design of our rail maximises the available measuring volume on your CMM. The rail can be located and secured to the

CMM’s granite on the left, centre, right or to an existing modular base plate, allowing multiple plates and configurations to be

used, that utilise one or both sides of the QuickLoad rail.

Custom fixtures can be designed for use with the QuickLoad rail system allowing for increased flexibility and repeatability of

your part inspection process.

The QuickLoad rail system is available to purchase separately or in sets. Additional thread sizes and custom sized plates are

also available to order, contact your local sales representative for more information or visit www.renishaw.com/quickloadrail


QuickLoad rails

Part number Thread Thickness Width Length

R-QLR-1350450 M4/M6/M8 12.4 mm 50.8 mm 457.2 mm

R-QLR-1350600 M4/M6/M8 12.4 mm 50 mm 600 mm

R-QLR2-1350600 (x2 rails) M4/M6/M8 12.4 mm 50 mm 600 mm

R-QLR-50218 1/4-20 0.5 in 2 in 18 in

R-QLR-50224 1/4-20 0.5 in 2 in 24 in

R-QLR2-50224 (x2 rails) 1/4-20 0.5 in 2 in 24 in

Included: all QuickLoad rails come with locating washers and M6, M8, M10, M12 and 1/4-20 cap head screws.

QuickLoad plates

Part number Thread Height Width Depth Hole spacing

R-QLPC-13150150-12-6 M6 12.7 mm 150 mm 150 mm 12.5 mm OC



R-QLPC-13300300-15-8 M8 12.7 mm 300 mm 300 mm 15 mm OC

R-QLPC-13450450-15-8 M8 12.7 mm 450 mm 450 mm 15 mm OC

R-QLPC-5066-50-20 1/4-20 0.5 in 6 in 6 in 0.5 in OC



N.B. Custom plate sizes and additional thread sizes available upon request, contact your local sales representative for more information.

QuickLoad rail and plate sets

Part number Thread Contents Quantity

R-KQL-A-6 M6R-QLR-1350600 1

R-QLPC-13300300-12-6 2

R-KQL-B-6 M6

R-QLR-1350600 2

R-QLPC-13300300-12-6 2

R-QLPC-13450450-12-6 2

R-KQL-A-8 M8R-QLR-1350600 1

R-QLPC-13300300-15-8 2

R-KQL-B-8 M8

R-QLR-1350600 2

R-QLPC-13300300-15-8 2

R-QLPC-13450450-15-8 2

R-KQL-A-20 1/4-20R-QLR-50224 1

R-QLPC-501212-50-20 2

R-KQL-B-20 1/4-20

R-QLR-50224 2

R-QLPC-501212-50-20 2

R-QLPC-501818-50-20 2

Included: all QuickLoad rails come with locating washers and M6, M8, M10, M12 and 1/4-20 cap head screws.

16

QuickLoad™ corner (QLC)

Renishaw’s QuickLoad™ corner (QLC) system is designed to fit your specific vision machine.

This system is made to fit the lower left hand corner of your

vision stage and the location of its mounting holes. The

QuickLoad corner contains magnets that allow Renishaw’s

vision acrylic base plates to snap into a precise and repeatable

position, enabling quick and easy loading and unloading of

plates. Steel pins are pressed into the sides of the plate to fit the

magnets contained in the QLC.

The edges of the QLC are serrated so that parts can be

mounted directly against them with Renishaw fixturing

components. This enables quick and easy viewing for inspection.

There are two plate options to choose from to accompany your

QLC:

• Multi-hole - Set up multiple parts on the plate at one time.

Ideal for fixturing parts of various shapes and sizes.

• Multi-window - Allows a clear, unobstructed view of your

parts. Multi-window plates can accommodate numerous

parts at one time with different size window options. Ideal

for small part inspection.

Interchangeable vision fixture (IVF)Renishaw’s interchangeable vision fixture (IVF) is ideal for machines 450 mm × 450 mm or larger.

The interchangeable vision fixture (IVF) makes holding parts an

easy and efficient turnkey fixturing method. Easily switch multiple

fixturing plates on and off the aluminium frame mounted to your

vision system.

The anodised aluminium frame and acrylic fixture plates are

custom made to fit and mount to your specific vision machine

taking into account the mounting of your probe rack and

calibration artefacts.

Fixturing plates can be different sizes, depending on the size

of your frame and parts and the number of parts you are

inspecting. Plates are designed to use all, 1/2, 1/4 or 1/8 of the

frames total size and are equipped with handles to load on to

the frame. Modular plates come with your choice of multi-hole or

multi-window threaded hole pattern.

Interchangeable fixture plates can be modular with M4, M6 or

1/4-20 threaded holes (10 mm or 0.50 in OC) or Renishaw can

design and build a custom fixture for your parts.

A combination of both modular and custom fixture plates can be

made to fit the same IVF frame. Some parts are better suited for

custom fixturing depending on the orientation, complexity ort the

part and the frequency of the inspection.


This page is left intentionally blank.


Fixture kits

Steps to building the right fixture kit

It’s easy to get started and build your own fixture kit using the simple steps below. Get in touch with our expert sales representatives who can help you build a kit unique to your needs.

A kit consists of one base plate and a comprehensive set of components available for CMM, vision, - including a QuickLoad™

corner (QLC) - and Equator™ gauging systems. The type of parts you are going to fixture, your machine and application, will

determine which kit you choose. Renishaw offers a range of different kit choices depending on your application.

Custom options are available, contact your local sales representative for more information.

Building your fixture kit

CMM and Equator kits:

1. Choose a thread size: M4, M6, M8 or 1/4-20

2. Choose the size of your fixture base plate

3. Choose a set of components (clamping or magnetic and clamping)

Vision and QLC kits:

1. Choose a thread size: M4, M6 or 1/4-20

2. Choose the size of your fixture acrylic base plate (multi-hole or multi-window)

3. Choose your QLC

4. Choose a set of components

Additional considerations when building your kit

CMM and Equator™ gauging system:

• Clamping component set

• Magnetic and clamping component set

If you are fixturing steel or cast iron parts, a magnetic and clamping component set is recommended.

Component sets are available with increasing amounts of components from A, our smallest component set, to B, our medium

sized set, and finally C, our largest set. Additional components can be purchased individually to expand your kit.

Vision:

• Multi-hole acrylic plate - more holes for attaching more components

• Multi-window acrylic plate - more windows for optimal viewing of small parts

Don’t forget to select the correct QLC specific to your vision or multi-sensor machine to accompany your acrylic base plate. To find the correct QLC compatible with your machine, please contact your local sales representative.

20

Choosing the correct fixture base plate

Renishaw fixture base plates are designed to allow the fixturing of all workpieces, from very small delicate parts, up to large,

heavy industrial components. Renishaw’s fixture base plates are available for three main applications CMM, vision and

Equator™ gauging system and because of this, there are several factors which need to be considered when choosing the

correct fixture base plate:

• Application (CMM, vision or Equator gauging system)

• Machine type

• Base plate size

• Thread size

Additional considerations for aluminium base plates

For aluminium base plates, it is important to ensure you secure your plate to the granite surface of your CMM bed. Securing

your base plate is always advised, to maintain accuracy and repeatability during your inspection process.

The two available options when securing your base plates are:

Plate clamps:

• Plates clamps can be purchased for an additional cost and can be used to secure any standard or custom fixture base

plates to your CMM granite, plate clamp part no. R-CPC-190 (see page 50).

Mounting holes:

• These are only provided on a request basis and should be discussed with your sales representative when placing your

order. Mounting holes can be added to any standard or custom base.

Fixture base plates

M4 multi-window acrylic plate, 11.7 mm × 250 mm × 250 mm

M6 Equator™ plate, 12.7 mm × 300 mm × 300 mm

M8 CMM aluminium plate, 12.7 mm × 450 mm × 450 mm

1/4-20 multi-hole acrylic plate, 0.5 in × 10 in × 10 in


CMM base plates

Renishaw CMM fixture base plates are precision ground within tight tolerances that are key to the quality of the modular Renishaw fixtures system.

Base plates are available in standard and custom sizes with a choice of

threaded holes: M4, M6, M8* or 1/4-20. Cast aluminium base plates are coated

with Nituff® hard coat anodise to resist wear and scratching and are available

in sizes up to 1500 mm × 3000 mm (60 in × 120 in). Custom sized plates are

available to order.

Don’t forget to ask your local sales representative about securing your plate

to the CMM granite. This can be done either with Renishaw’s plate clamps or

mounting holes.

* M12 thread size available upon request.

Part number Thread Height Width Depth Spacing

M4 plates

R-PC-13150150-10-4 M4 13 mm 150 mm 150 mm 10 mm OC

R-PC-13300300-10-4 M4 13 mm 300 mm 300 mm 10 mm OC

M6 plates

R-PC-13150150-12-6 M6 13 mm 150 mm 150 mm 12.5 mm OC

R-PC-13300300-12-6 M6 13 mm 300 mm 300 mm 12.5 mm OC

R-PC-13450450-12-6 M6 13 mm 450 mm 450 mm 12.5 mm OC

R-PC-19600600-12-6 M6 19 mm 600 mm 600 mm 12.5 mm OC

R-PC-19750750-12-6* M6 19 mm 750 mm 750 mm 12.5 mm OC

R-PC-197501000-12-6* M6 19 mm 750 mm 1000 mm 12.5 mm OC

R-PC-199001200-12-6* M6 19 mm 900 mm 1200 mm 12.5 mm OC

M8 plates

R-PC-13300300-15-8 M8 13 mm 300 mm 300 mm 15 mm OC

R-PC-13450450-15-8 M8 13 mm 450 mm 450 mm 15 mm OC

R-PC-19600600-15-8 M8 19 mm 600 mm 600 mm 15 mm OC

R-PC-19750750-15-8* M8 19 mm 750 mm 750 mm 15 mm OC

R-PC-197501020-15-8* M8 19 mm 750 mm 1020 mm 15 mm OC

R-PC-199001200-15-8* M8 19 mm 900 mm 1200 mm 15 mm OC

1/4-20 plates

R-PC-5066-50-20 1/4-20 0.5 in 6 in 6 in 0.5 in OC

R-PC-501212-50-20 1/4-20 0.5 in 12 in 12 in 0.5 in OC

R-PC-501818-50-20* 1/4-20 0.5 in 18 in 18 in 0.5 in OC

R-PC-752424-50-20* 1/4-20 0.75 in 24 in 24 in 0.5 in OC

R-PC-752840-50-20* 1/4-20 0.75 in 28 in 40 in 0.5 in OC

R-PC-753030-50-20* 1/4-20 0.75 in 30 in 30 in 0.5 in OC

R-PC-753648-50-20* 1/4-20 0.75 in 36 in 48 in 0.5 in OC

* Mounting holes may also be added and longer lead times may apply to larger plates.

22

Vision base plates

Our acrylic fixture base plates can be customised to fit and mount to your vision stage with a small area in the centre of the plate without threaded holes, which allows an unrestricted view for very small parts.

Acrylic base plates are 13 mm (0.50 in) thick and available in sizes from 150 mm ×

150 mm (6 in × 6 in) up to 400 mm × 400 mm (16 in × 16 in ), available with M4, M6 or 1/4-

20 threaded holes. Custom sized plates are available to order.

There are two base plate options to choose from:

Multi-hole - offers greater flexibility to set up and check as many parts as possible at one

time with a clear area in the centre of the plate.

Multi-window - more windows for the clearest view of small parts.

Don’t forget to select the correct QuickLoad™ corner (QLC) specific to your vision or multi-

sensor machine to accompany your acrylic base plate. To find the correct QLC compatible

with your machine, please contact your local sales representative.

Part number Thread Height Width Depth Windows Spacing

M4 multi-hole plates (ideal for parts 75 mm × 75 mm or smaller)

R-PV-13150150-10-4 M4 13 mm 150 mm 150 mm - 10 mm OC

R-PV-13200200-10-4 M4 13 mm 200 mm 200 mm - 10 mm OC

R-PV-13250150-10-4 M4 13 mm 250 mm 150 mm - 10 mm OC

R-PV-13250250-10-4 M4 13 mm 250 mm 250 mm - 10 mm OC

R-PV-13300200-10-4 M4 13 mm 300 mm 200 mm - 10 mm OC

R-PV-13300300-10-4 M4 13 mm 300 mm 300 mm - 10 mm OC

R-PV-13400400-10-4 M4 13 mm 400 mm 400 mm - 10 mm OC

R-PV-13250150-10-4R* M4 13 mm 250 mm 150 mm - 10 mm OC




M4 multi-window plates

R-PV-W-13150150-10-4 M4 13 mm 150 mm 150 mm 4 10 mm OC




R-PVW-13300200-10-4 M4 13 mm 300 mm 200 mm 3 10 mm OC

R-PVW-13300300-10-4 M4 13 mm 300 mm 300 mm 8 10 mm OC


R-PVW-13200200-10-4R* M4 13 mm 200 mm 200 mm 5 10 mm OC




M6 multi-hole plates

R-PV-13150150-12-6 M6 13 mm 150 mm 150 mm - 12.5 mm OC

R-PV-13250250-12-6 M6 13 mm 250 mm 250 mm - 12.5 mm OC

M6 multi-window plates

R-PV-W-13250150-12-6 M6 13 mm 250 mm 150 mm 4 12.5 mm OC



*The letter R at end of a vision plate part number indicates that the plate is designed for use with a lower right mounting QLC.


Equator™ gauging system base plates

Base plates for Renishaw Equator system fixtures use a 3-point kinematic system and can be taken on and off the Equator system within seconds.

The base plates are available in M4, M6, M8 or 1/4-20 thread sizes and are all

precision ground within tight tolerances.

Each plate is cast aluminium and coated with Nituff® hard coat anodise to

reduce wear and scratching.

Part number Thread Height Width Depth Spacing

M4 plate

R-PCR-13300300-10-4 M4 13 mm 300 mm 300 mm 10 mm OC

M6 plate

R-PCR-13300300-12-6 M6 13 mm 300 mm 300 mm 12.5 mm OC


M8 plate


1/4-20 plate

R-PCR-501212-50-20 1/4-20 0.5 in 12 in 12 in 0.5 in OC

Vision base plates continued

Part number Thread Height Width Depth Windows Spacing

1/4-20 multi-hole plates

R-PV-5066-50-20 1/4-20 0.5 in 6 in 6 in - 0.5 in OC

R-PV-501010-50-20 1/4-20 0.5 in 10 in 10 in - 0.5 in OC

R-PV-50128-50-20 1/4-20 0.5 in 12 in 8 in - 0.5 in OC

R-PV-501616-50-20 1/4-20 0.5 in 16 in 16 in - 0.5 in OC

R-PV-501010-50-20R* 1/4-20 0.5 in 10 in 10 in - 0.5 in OC

R-PV-501212-50-20R* 1/4-20 0.5 in 12 in 12 in - 0.5 in OC

1/4-20 multi-window plates

R-PV-W-50106-50-20 1/4-20 0.5 in 10 in 6 in 4 0.5 in OC

R-PV-W-501010-50-20 1/4-20 0.5 in 10 in 10 in 5 0.5 in OC

R-PVW-50128-50-20 1/4-20 0.5 in 12 in 8 in 4 0.5 in OC

R-PV-W-501616-50-20 1/4-20 0.5 in 16 in 16 in 7 0.5 in OC

R-PVW-501010-50-20R* 1/4-20 0.5 in 10 in 10 in 5 0.5 in OC

R-PVW-501212-50-20R* 1/4-20 0.5 in 12 in 12 in 6 0.5 in OC

*R at end of part number indicates that the plate is designed for use with a lower right mounting QLC.

24

CMM and Equator™ gauging system component setsM4 CMM and Equator system component set: Clamping

The M4 CMM and Equator system clamping kits can be used to

hold brass, titanium, aluminium, plastic and other non-ferrous parts.

To build your kit, select an appropriately sized base plate for your

requirements with M4 threaded holes. Don’t forget to ask your sales

representative to add on plate clamps or mounting holes to your

order to secure your plate to the CMM granite.

Part number DescriptionSet A (part no. R-FSC-CA-4)

R-S-610-4* 6 mm dia. × 10 mm standoff 3R-S-625-4* 6 mm dia. × 2 mm standoff 3R-S-95-4* 9 mm dia. × 5 mm standoff 3R-S-910-4 9 mm dia. × 10 mm standoff 3R-S-925-4 9 mm dia. × 25 mm standoff 3R-S-950-4 9 mm dia. × 50 mm standoff 2R-S-1210-4 12 mm dia. × 12 mm standoff 3R-S-1225-4 12 mm dia. × 25 mm standoff 3R-S-1250-4 12 mm dia. × 50 mm standoff 2R-SP-610-4 6 mm dia. × 10 mm pin standoff 2R-SP-910-4 9 mm dia. × 10 mm pin standoff 2R-CT-40-25-4 40 mm tension clamp with 25 mm post 2R-CW-25-25-4 25 mm wire clamp with 25 mm post 3R-CW-50-50-4 50 mm wire clamp with 50 mm post 2R-RPA-4 Aluminium resting pin 4R-AJ-9-4 9 mm dia. adjustable jackstand 1R-AS-30-4 30 mm long adjustable slide 1R-AS-45-4 45 mm long adjustable slide 1R-TB-1619-4 Tower block with base 16 mm² × 19 mm 1R-TC-300190-4 300 mm × 190 mm × 25 mm component tray 1

R-BC10 50 mm × 200 mm × 150 mm compartment box (not shown)

1

Total number of components in each set 46

* Component does not have a threaded top

R-FSC-CA-4


M6 CMM and Equator system component sets: Clamping

The M6 CMM and Equator system clamping kits can be used to

hold brass, titanium, aluminium, plastic and other non-ferrous parts.






Set B (part no. R-FSC-CB-6)

Set C (part no. R-FSC-CC-6)

R-S-910-6 9 mm dia. × 10 mm standoff - 3 6R-S-1310-6 13 mm dia. × 10 mm standoff - - 4R-S-1320-6 13 mm dia. × 20 mm standoff 3 6 8R-S-1325-6 13 mm dia. × 25 mm standoff 3 6 8R-S-1350-6 13 mm dia. × 50 mm standoff 3 6 8R-S-1910-6 19 mm dia. × 10 mm standoff - 3 4R-S-1920-6 19 mm dia. × 20 mm standoff 3 6 8R-S-1925-6 19 mm dia. × 25 mm standoff 3 6 8R-S-1950-6 19 mm dia. × 50 mm standoff 3 6 8R-S-19100-6 19 mm dia. × 100 mm standoff - 4 6R-S-2520-6 25 mm dia. × 20 mm standoff 3 6 8R-S-2525-6 25 mm dia. × 25 mm standoff 3 6 8R-S-2550-6 25 mm dia. × 50 mm standoff 3 6 8R-S-25100-6 25 mm dia. × 100 mm standoff - 4 6R-SP-1325-6 13 mm dia. × 25 mm pin standoff 2 4 4R-SP-1925-6 19 mm dia. × 25 mm pin standoff - - 2R-CT-40-30-6 40 mm tension clamp with 30 mm post 2 6 6R-CT-64-70-6 64 mm tension clamp with 70 mm post 4 12 12R-CT-95-83-6 95 mm tension clamp with 83 mm post - - 3R-CT-100P-83-6 100 mm tension clamp plunger with 83 mm post - - 3R-CTB-25-6 25 mm tension clamp bracket - - 1R-RCD-6 Delrin® resting cone 4 4 6R-RPS-6 Steel resting pin - 4 6R-APJ-6 Adjustable pivot joint - - 1R-AJ-13-6 13 mm dia. adjustable jackstand 1 2 4R-AJ-25-6 25 mm dia. adjustable jackstand - 2 3R-AS-45-6 45 mm long adjustable slide 1 2 3R-AS-70-6 70 mm long adjustable slide 1 2 4R-TB-2025-6 Tower block with base 20 mm² × 30 mm - 2 2R-T-25300-6 25 mm² × 300 mm tower - - 1R-TC-500200 500 mm × 200 mm × 25 mm component tray 1 1 2

R-BC1050 mm × 200 mm × 150 mm compartment box (not shown)

1 1 2

Total number of components in each set 44 110 163

R-FSC-CB-6

26

M6 CMM and Equator system component sets: Magnetic and clamping

The M6 CMM and Equator system magnetic and clamping kits can

be used to hold steel, aluminium, plastic, ferrous and other non-

ferrous parts.





Part number DescriptionSet A (part no. R-FSC-MCA-6)

Set B (part no. R-FSC-MCB-6)

Set C (part no. R-FSC-MCC-6)

R-M-13-6 13 mm dia. × 25 mm magnet 3 4 6R-M-19-6 19 mm dia. × 25 mm magnet 3 4 6R-M-25-6 25 mm dia. × 25 mm magnet 3 4 6R-MP-13-6 13 mm dia. × 25 mm pin magnet - 2 2R-MP-19-6 19 mm dia. × 25 mm pin magnet - - 2R-S-910-6 9 mm dia. × 10 mm standoff - 3 4R-S-1310-6 13 mm dia. × 10 mm standoff - - 4R-S-1320-6 13 mm dia. × 20 mm standoff 3 6 8R-S-1325-6 13 mm dia. × 25 mm standoff 3 6 8R-S-1350-6 13 mm dia. × 50 mm standoff 3 6 8R-S-1910-6 19 mm dia. × 10 mm standoff - 3 4R-S-1920-6 19 mm dia. × 20 mm standoff 3 6 8R-S-1925-6 19 mm dia. × 25 mm standoff 3 6 8R-S-1950-6 19 mm dia. × 50 mm standoff 3 6 8R-S-19100-6 19 mm dia. × 100 mm standoff - 3 6R-S-2520-6 25 mm dia. × 20 mm standoff 3 6 8R-S-2525-6 25 mm dia. × 25 mm standoff 3 6 8R-S-2550-6 25 mm dia. × 50 mm standoff 3 6 8R-S-25100-6 25 mm dia. × 100 mm standoff - 3 6R-CT-40-30-6 40 mm tension clamp with 30 mm post - 4 4R-CT-64-70-6 64 mm tension clamp with 70 mm post 4 8 8R-CT-95-83-6 95 mm tension clamp with 83 mm post - - 2R-CTB-25-6 25 mm tension clamp bracket - - 1R-RCD-6 Delrin® resting cone 4 4 6R-RPS-6 Steel resting pin - 4 6R-APJ-6 Adjustable pivot joint - - 1R-AJ-13-6 13 mm dia. adjustable jackstand 1 2 3R-AJ-25-6 25 mm dia. adjustable jackstand - 2 3R-AS-45-6 45 mm long adjustable slide 1 2 3R-AS-70-6 70 mm long adjustable slide 1 2 3R-TB-2025-6 Tower block with base 20 mm² × 30 mm - 2 2R-T-25300-6 25 mm² × 300 mm tower - - 1R-TC-500200 500 mm × 200 mm × 25 mm component tray 1 1 2


1 1 2


R-FSC-MCB-6


M8 CMM and Equator system component sets: Clamping

The M8 CMM and Equator system clamping component set can

be used to hold aluminium, plastic, brass, titanium and other non-

ferrous parts.








R-S-1315-8 13 mm dia. × 15 mm standoff - 3 4R-S-1320-8 13 mm dia. × 20 mm standoff 3 6 8R-S-1325-8 13 mm dia. × 25 mm standoff 3 6 8R-S-1350-8 13 mm dia. × 50 mm standoff 3 6 8R-S-1915-8 19 mm dia. × 15 mm standoff - 3 4R-S-1920-8 19 mm dia. × 20 mm standoff 3 6 8R-S-1925-8 19 mm dia. × 25 mm standoff 3 6 8R-S-1950-8 19 mm dia. × 50 mm standoff 3 6 8R-S-19100-8 19 mm dia. × 100 mm standoff - 4 6R-S-2520-8 25 mm dia. × 20 mm standoff 3 6 8R-S-2525-8 25 mm dia. × 25 mm standoff 3 6 8R-S-2550-8 25 mm dia. × 50 mm standoff 3 6 8R-S-25100-8 25 mm dia. × 100 mm standoff - 4 6R-SP-1325-8 13 mm dia. × 25 mm pin standoff 2 4 6R-CT-40-30-8 40 mm tension clamp with 30 mm post 2 6 6R-CT-64-70-8 64 mm tension clamp with 70 mm post 4 12 12R-CT-95-83-8 95 mm tension clamp with 83 mm post - - 3R-CT-100P-83-8 100 mm tension clamp plunger with 83 mm post - - 3R-CTB-25-8 25 mm tension clamp bracket - - 1R-RCD-8 Delrin® resting cone 4 4 4R-RCS-8 Steel resting cone - 4 4R-APJ-8 Adjustable pivot joint - - 1R-AJ-19-8 19 mm dia. adjustable jackstand 1 2 4R-AJ-25-8 25 mm dia. adjustable jackstand - 2 3R-AS-45-8 45 mm long adjustable slide - 1 3R-AS-70-8 70 mm long adjustable slide 1 3 4R-TB-2530-8 Tower block with base - 2 2R-T-25300-8 25 mm² × 300 mm tower - - 1R-TC-500200 500 mm × 200 mm × 25 mm component tray 1 1 2


1 1 2


R-FSC-CB-8

28

M8 CMM and Equator system component sets: Magnetic and clamping

The M8 CMM and Equator system magnetic and clamping

component set can be used to hold steel, aluminium, plastic, ferrous

and other non-ferrous parts.








R-M-13-8 13 mm dia. × 25 mm magnet 3 4 6R-M-19-8 19 mm dia. × 25 mm magnet 3 4 6R-M-25-8 25 mm dia. × 25 mm magnet 3 4 6R-MP-13-8 13 mm dia. × 25 mm pin magnet - 2 2R-MP-19-8 19 mm dia. × 25 mm pin magnet - - 2R-S-1315-8 13 mm dia. × 15 mm standoff - 3 3R-S-1320-8 13 mm dia. × 20 mm standoff 3 6 8R-S-1325-8 13 mm dia. × 25 mm standoff 3 6 8R-S-1350-8 13 mm dia. × 50 mm standoff 3 6 8R-S-1915-8 19 mm dia. × 15 mm standoff - 3 3R-S-1920-8 19 mm dia. × 20 mm standoff 3 6 8R-S-1925-8 19 mm dia. × 25 mm standoff 3 6 8R-S-1950-8 19 mm dia. × 50 mm standoff 3 6 8R-S-19100-8 19 mm dia. × 100 mm standoff - 4 6R-S-2520-8 25 mm dia. × 20 mm standoff 3 6 8R-S-2525-8 25 mm dia. × 25 mm standoff 3 6 8R-S-2550-8 25 mm dia. × 50 mm standoff 3 6 8R-S-25100-8 25 mm dia. × 100 mm standoff - 4 6R-CT-40-30-8 40 mm tension clamp with 30 mm post - 4 4R-CT-64-70-8 64 mm tension clamp with 70 mm post 3 8 8R-CT-95-83-8 95 mm tension clamp with 83 mm post - - 2

R-CTB-25-8 25 mm tension clamp bracket - - 1

R-RCD-8 Delrin® resting cone 4 4 4R-RCS-8 Steel resting cone - 4 4R-APJ-8 Adjustable pivot joint - - 1R-AJ-19-8 19 mm dia. adjustable jackstand 1 2 3R-AJ-25-8 25 mm dia. adjustable jackstand - 2 3R-AS-45-8 45 mm long adjustable slide - 1 3R-AS-70-8 70 mm long adjustable slide 1 3 3R-TB-2530-8 Tower block with base - 2 2R-T-25300-8 25 mm² × 300 mm tower - - 1R-TC-500200 500 mm × 200 mm × 25 mm component tray 1 1 2


1 1 2


R-FSC-MCB-8


1/4-20 CMM and Equator system component sets: Clamping

The 1/4-20 CMM and Equator system clamping component set can

be used to hold aluminium, plastic, brass, titanium and other non-

ferrous parts.


requirements with 1/4-20 threaded holes. Don’t forget to ask your

sales representative to add on plate clamps or mounting holes to

your order to secure your plate to the CMM granite.




R-S-37550-20 0.375 in dia. × 0.5 in standoff - 3 6R-S-5050-20 0.5 in dia. × 0.5 in standoff - - 4R-S-5075-20 0.5 in dia. × 0.75 in standoff 3 6 8R-S-501-20 0.5 in dia. × 1.0 in standoff 3 6 8R-S-502-20 0.5 in dia. × 2.0 in standoff 3 6 8R-S-7550-20 0.75 in dia. × 0.5 in standoff - 3 4R-S-7575-20 0.75 in dia. × 0.75 in standoff 3 6 8R-S-751-20 0.75 in dia. × 1.0 in standoff 3 6 8R-S-752-20 0.75 in dia. × 2.0 in standoff 3 6 8R-S-754-20 0.75 in dia. × 4.0 in standoff - 4 6R-S-175-20 1.0 in dia. × 0.75 in standoff 3 6 8R-S-11-20 1.0 in dia. × 1.0 in standoff 3 6 8R-S-12-20 1.0 in dia. × 2.0 in standoff 3 6 8R-S-14-20 1.0 in dia. × 4.0 in standoff - 4 6R-SP-501-20 0.5 in dia. × 1.0 in pin standoff 2 4 4R-SP-751-20 0.75 in dia. × 1.0 in pin standoff - - 2R-CT-160-125-20 1.6 in tension clamp with 1.25 in post 2 6 6R-CT-250-275-20 2.5 in tension clamp with 2.75 in post 4 12 12R-CT-375-325-20 3.75 in tension clamp with 3.25 in post - - 3R-CT-4P-325-20 4.0 in tension clamp plunger with 3.25 in post - - 3R-CTB-1-20 1.0 in tension clamp bracket - - 1R-RCD-20 Delrin® resting cone 3 4 6R-RPS-20 Steel resting pin - 4 6R-APJ-20 Adjustable pivot joint - - 1R-AJ-50-20 0.50 in dia. adjustable jackstand 1 2 4R-AJ-1-20 1.0 in dia. adjustable jackstand - 2 3R-AS-1-20 1.0 in long adjustable slide 1 2 3R-AS-3-20 3.0 in long adjustable slide 1 2 4R-TB-751-20 Tower block with base 0.75 in² × 1.0 in - 2 2R-T-112-20 1.0 in² × 12.0 in tower (1 row, 4 sides) - - 1R-TC-500200 20 in × 8 in × 1 in component tray 1 1 2R-BC10 8 in × 8 in × 2 in compartment box (not shown) 1 1 2Total number of components in each set 42 109 161

R-FSC-CB-20

30

1/4-20 CMM and Equator system component sets: Magnetic and clamping

The 1/4-20 CMM and Equator system magnetic and clamping

component set can be used to hold steel, aluminium, plastic, ferrous

and other non-ferrous parts.


requirements with 1/4-20 threaded holes. Don’t forget to ask your

sales representative to add on plate clamps or mounting holes to

your order to secure your plate to the CMM granite.




R-M-50-20 0.5 in dia. × 1.0 in magnet 3 4 6R-M-75-20 0.75 in dia. × 1.0 in magnet 3 4 6R-M-1-20 1.0 in dia. × 1.0 in magnet 3 4 6R-MP-50-20 0.5 in dia. × 1.0 in pin magnet - 2 2R-MP-75-20 0.75 in dia. × 1.0 in pin magnet - - 2R-S-37550-20 0.375 in dia. × 0.5 in standoff - 3 4R-S-5050-20 0.5 in dia. × 0.5 in standoff - - 4R-S-5075-20 0.5 in dia. × 0.75 in standoff 3 6 8R-S-501-20 0.5 in dia. × 1.0 in standoff 3 6 8R-S-502-20 0.5 in dia. × 2.0 in standoff 3 6 8R-S-7550-20 0.75 in dia. × 0.5 in standoff - 3 4R-S-7575-20 0.75 in dia. × 0.75 in standoff 3 6 8R-S-751-20 0.75 in dia. × 1.0 in standoff 3 6 8R-S-752-20 0.75 in dia. × 2.0 in standoff 3 6 8R-S-754-20 0.75 in dia. × 4.0 in standoff - 3 6R-S-175-20 1.0 in dia. × 0.75 in standoff 3 6 8R-S-11-20 1.0 in dia. × 1.0 in standoff 3 6 8R-S-12-20 1.0 in dia. × 2.0 in standoff 3 6 8R-S-14-20 1.0 in dia. × 4.0 in standoff - 3 6R-CT-160-125-20 1.6 in tension clamp with 1.25 in post - 4 4R-CT-250-275-20 2.5 in tension clamp with 2.75 in post 4 8 8R-CT-375-325-20 3.75 in tension clamp with 3.25 in post - - 2R-CTB-1-20 1.0 in tension clamp bracket - - 1R-RCD-20 Delrin® resting cone 3 4 6R-RPS-20 Steel resting pin - 4 6R-APJ-20 Adjustable pivot joint - - 1R-AJ-50-20 0.50 in dia. adjustable jackstand 1 2 3R-AJ-1-20 1.0 in dia. adjustable jackstand - 2 3R-AS-1-20 1.0 in long adjustable slide 1 2 3R-AS-3-20 3.0 in long adjustable slide 1 2 3R-TB-751-20 Tower block with base 0.75 in² × 1.0 in - 2 2R-T-112-20 1.0 in² × 12.0 in tower (1 row, 4 sides) - - 1R-TC-500200 20 in × 8 in × 1 in component tray 1 1 2R-BC10 8 in × 8 in × 2 in compartment box (not shown) 1 1 2Total number of components in each set 47 111 163

R-FSC-MCB-20


Vision component sets

M4 vision component sets

The M4 vision component set is ideal for holding small intricate

parts, ferrous or non-ferrous.

N.B.: Ensure that the acrylic plate and QuickLoad corner you

select will fit your specific machine. Please contact your local sales

representative to discuss your requirements.

Part number DescriptionSet A (part no. R-FSV-A-4)

Set B (part no. R-FSV-B-4)

R-S-65-4* 6 mm dia. × 5 mm standoff - 3R-S-610-4* 6 mm dia. × 10 mm standoff 3 6R-S-625-4* 6 mm dia. × 25 mm standoff 3 6R-S-95-4* 9 mm dia. × 5 mm standoff 3 3R-S-910-4 9 mm dia. × 10 mm standoff 3 6R-S-920-4 9 mm dia. × 20 mm standoff 3 6R-S-925-4 9 mm dia. × 25 mm standoff 3 6R-S-1210-4 12 mm dia. × 10 mm standoff 3 6R-S-1225-4 12 mm dia. × 25 mm standoff 3 6R-SP-610-4 6 mm dia. × 10 mm pin standoff 2 4R-SP-910-4 9 mm dia. × 10 mm pin standoff 2 4R-CTT-40-25-4 40 mm tension clamp with coated soft tip with 25 mm post 2 4R-CWT-25-25-4 25 mm wire clamp with coated soft tip with 50 mm post 2 4R-CWT-50-50-4 50 mm wire clamp with coated soft tip with 50 mm post 2 4R-CP-4 Pusher clamp 1 1R-CVM-B-4 Micro vice clamp with base 1 1R-CSPS-1210-4 Spring pusher standoff clamp 1 1R-RPA-4 Aluminum resting pin 4 4R-VC-5050-4 50 mm × 50 mm corner viewer 1 1R-AJ-9-4 9 mm dia. adjustable jackstand 1 2R-AS-30-4 30 mm long adjustable slide 1 2R-ASA-45-4 45 mm long adjustable acrylic slide base 1 2R-TB-1619-4 Tower block with base 16 mm² × 19 mm 1 1R-TC-300190-4 300 mm × 190 mm × 25 mm component tray 1 1R-BC10 40 mm × 200 mm × 135 mm compartment box (not shown) 1 1Total number of components in each set 48 85


R-FSV-B-4

32

M6 vision component set

The M6 vision component set can be used to hold any type or part,

ferrous or non-ferrous.




Part number DescriptionSet A (part no. R-FSV-A-6)

R-S-610-6* 6 mm dia. × 10 mm standoff 3R-S-625-6* 6 mm dia. × 25 mm standoff 3R-S-95-6* 9 mm dia. × 5 mm standoff 3R-S-910-6 9 mm dia. × 10 mm standoff 3R-S-920-6 9 mm dia. × 20 mm standoff 3R-S-925-6 9 mm dia. × 25 mm standoff 3R-S-1310-6 13 mm dia. × 10 mm standoff 3R-S-1320-6 13 mm dia. × 20 mm standoff 3R-SP-610-6 6 mm dia. × 10 mm pin standoff 2R-SP-910-6 9 mm dia. × 10 mm pin standoff 2R-CTT-40-30-6 40 mm tension clamp with coated soft tip with 30 mm post 4R-CWT-25-25-6 25 mm wire clamp with coated soft tip with 25 mm post 4R-CWT-50-50-6 50 mm wire clamp with coated soft tip with 50 mm post 4R-CP-6 Pusher clamp 1R-CVM-B-6 Micro vice clamp with base 1R-CSPS-1925-6 19 mm dia. × 25 mm spring pusher standoff clamp 1R-RPS-6 Steel resting pin 4R-VC-7575-6 75 mm × 75 mm corner viewer 1R-AJ-13-6 13 mm dia. adjustable jackstand 1R-AS-45-6 45 mm long adjustable slide 1R-ASA-45-6 45 mm long adjustable acrylic slide base 1R-TB-2025-6 Tower block with base 20 mm² × 30 mm 1R-TC-300190-6 300 mm × 190 mm × 25 mm component tray 1R-BC10 50 mm × 200 mm × 150 mm compartment box (not shown) 1Total number of components in each set 54


R-FSV-A-6


1/4-20 vision component sets

The 1/4-20 vision component set can be used to hold any type of

part, ferrous or non-ferrous.




Part number DescriptionSet A (part no. R-FSV-QLCA-20)

Set B (part no. R-FSV-QLCB-20)

R-S-2550-20* 0.25 in dia. × 0.5 in standoff 3 3

R-S-251-20* 0.25 in dia. × 1.0 in standoff 3 6R-S-37525-20* 0.375 in dia. × 0.25 in standoff 3 6R-S-37550-20 0.375 in dia. × 0.5 in standoff 3 6

R-S-37575-20 0.375 in dia. × 0.75 in standoff 3 6

R-S-3751-20 0.375 in dia. × 1.0 in standoff 3 6R-S-5050-20 0.5 in dia. × 0.5 in standoff 3 6R-S-5075-20 0.5 in dia. × 0.75 in standoff 3 6R-S-501-20 0.5 in dia. × 1.0 in standoff - 6R-SP-2550-20 0.25 in dia. × 0.5 in pin standoff 2 4R-SP-37550-20 0.375 in dia. × 0.5 in pin standoff 2 4R-CTT-160-125-20 1.6 in tension clamp with rubber coated tip with 1.25 in post 4 4R-CWT-1-1-20 1.0 in wire clamp with rubber coated tip with 1.0 in post 4 4R-CWT-2-2-20 2.0 in wire clamp with rubber coated tip with 2.0 in post 4 4R-RPS-20 Steel resting pin 4 4R-VC-33-20 3.25 in × 3.25 in corner viewer 1 1R-AJ-50-20 0.5 in dia. adjustable jackstand 1 2R-CP-20 Pusher clamp 1 1R-CSPS-751-20 0.75 in dia. × 1.0 in spring pusher standoff clamp 1 1R-AS-1-20 1.0 in long adjustable slide 1 2R-ASA-2-20 2.0 in long adjustable acrylic slide 1 2R-TB-751-20 Tower block with base 0.75 in² × 1.0 in 1 2R-CVM-B-20 Micro vice clamp with base 1 1R-TC-300190-20 20 in × 8 in × 1 in component tray 1 1R-BC10 8 in × 8 in × 2 in compartment box (not shown) 1 1Total number of components in each set 54 89


R-FSV-QLCB-20

Modular fixturing components

Adjustables ............................................................................................................. 36

Clamps ..................................................................................................................... 42

Magnets ................................................................................................................... 52

Miscellaneous ......................................................................................................... 56

Standoffs ................................................................................................................. 62

Suction cups ........................................................................................................... 68

Towers ..................................................................................................................... 72

Trays ........................................................................................................................ 76

36

AdjustablesAllow for added flexibility when fixturing complex parts.


Adjustable jack standTo allow variable heights of up to 22 mm and then lock into position.

R-AJ-25-8

R-APJ-8

Adjustable pivot jointFor positioning a component at any angle. Lock the rotating base into position and then set the angle of the pivot.

Part no. THD DIA HT ADJ

R-AJ-9-4 M4 9.5 mm 16.1 mm 2.5 mm

R-AJ-13-6 M6 15.9 mm 42.4 mm 14 mm

R-AJ-25-6 M6 25.4 mm 42.4 mm 13.5 mm

R-AJ-19-8 M8 19.1 mm 37 mm 13 mm

R-AJ-25-8 M8 25.4 mm 42.4 mm 12.7 mm

R-AJS-35-8* M8 38.1 mm 65 mm 15 mm

R-AJS-50-12* M12 50.8 mm 100 mm 35.5 mm

R-AJ-50-20 1/4-20 0.63 in 1.5 in 0.55 in

R-AJ-1-20 1/4-20 1.0 in 1.5 in 0.5 in

* = component made from steel.


R-APJ-6 M6 19 mm 50.8 mm 186°

R-APJ-8 M8 19 mm 50.8 mm 186°

R-APJ-20 1/4-20 0.75 in 2.0 in 186°

��

��

��°

��

THD

MAX ADJ

DIA

HT

THD

MAX ADJ

HT

DIA

THD

HT

ADJ

DIA

R-AS-45-8

Adjustable slide To place components in between holes on the plate.

R-AS-45-4

Part no. THD HT A B C

R-AS-30-4 M4 5 mm 30.1 mm 12.7 mm 9.3 mm

R-AS-45-4 M4 5 mm 45 mm 12.7 mm 23.8 mm

R-AS-45-6 M6 10 mm 44.5 mm 20 mm 12.9 mm

R-AS-70-6 M6 10 mm 72 mm 25 mm 33.9 mm

R-AS-100-6 M6 10 mm 100 mm 25 mm 61.9 mm

R-AS-45-8 M8 10 mm 44.5 mm 20 mm 12.9 mm

R-AS-70-8 M8 10 mm 71.9 mm 25 mm 33.9 mm

R-AS-150-12 M12 25 mm 175 mm 50.8 mm 100 mm

R-AS-1-20 1/4-20 0.25 in 1.38 in 0.63 in 0.5 in

R-AS-3-20 1/4-20 0.25 in 3.0 in 1.0 in 1.5 in

Included: socket head cap and thumb screws.

HT

��

�

�

�

��

THDB

CA

HT

38

Adjustable height standTo allow variable heights without marring the part.

R-AH-2545-8


R-AH-2545-6 M6 25.4 mm 45 mm 9 mm

R-AH-2545-8 M8 25.4 mm 45 mm 9 mm

R-AH-1175-20 1/4-20 1.0 in 1.75 in 0.38 in��

��

��

��

DIA

HT

ADJTHD

R-AVP-2525-6

Adjustable V-postFor holding cylindrical or tubular parts without marring the part’s surface. Can be rotated and locked to any orientation.


R-AVP-2525-6 M6 25.1 mm 25 mm 360°

R-AVP-2525-8 M8 25.1 mm 25 mm 360°

R-AVP-11-20 1/4-20 0.99 in 1.0 in 360°

Included: shoulder bolt.

HT

DIA

��°

��

��

HT

DIA

120°

R-ASA-45-4

Adjustable acrylic slide To place components in between holes on the plate.


R-ASA-45-4 M4 5 mm 45 mm 12.7 mm 24 mm

R-ASA-45-6 M6 10 mm 50.8 mm 20 mm 28.6 mm

R-ASA-2-20 1/4-20 0.025 in 2 in 0.63 in 1.13 in

Included: socket head cap and thumb screws.

HT

��

�

�

�

��

THDB

CA

HT

360° ADJ


Adjustable slide acrylic extensionScrew any component onto the acrylic slide to extend the reach of the component.

Part no. THD HT A B C ADJ

R-ASAE-4 M4 10 mm 82.3 mm 12.7 mm 25.4 mm 186°

Included: socket head screws.

HT

A

B

C

ADJR-ASAE-4

B

CA

ADJ

HT

Rotational micro VFor holding small cylindrical or tubular parts with minimal surface contact.

R-VMR-1525-4

Adjustable slide mirrorTo aid viewing and inspecting a part.


R-ASM-4 M4 28.6 mm 75 mm 20.24 mm 30 mm

R-ASM-50-2 M4/M6/ 1/4-20

45.8 mm/ 1.8 in

95 mm/ 3.75 in

34.9 mm/ 1.97 in

31.8 mm/ 1.18 in

R-ASM-50-2

HT

B

CA

45°

Part no. THD HT A

R-VMR-1525-4 M4 26.5 mm 15.9 mm

R-VMR-1525-6 M6 25 mm 15.9 mm

R-VMR-631-20 1/4-20 1.04 in 0.63 in

HT

THDØ A

R-ASM-4

40

Quick slide plateThreaded slide plate, designed to mount fixturing components to, using the QuickLoad Corner (QLC).

Part no. THD A B C HT

R-PSQ-2042-4 M4 20.5 mm 20 mm 79 mm 17.6 mm

R-PSQ-3272-4 M4 20.5 mm 32 mm 109 mm 17.6 mm

Included: socket head cap screws and washers.

R-PSQ-3272-4

R-PSQ-2042-4

Adjustable angle plateIdeal for holding components on an angle. The angle plate is adjustable to 180°.

R-PCA-135075-15-8


R-PCA-135075-10-4 M4 12.3 mm 76.2 mm 50.8 mm 180°

R-PCA-135075-12-6 M6 12.3 mm 76.2 mm 50.8 mm 180°

R-PCA-135075-15-8 M8 12.3 mm 76.2 mm 50.8 mm 180°

R-PCA-5023-50-20 1/4-20 0.49 in 3.0 in 2.0 in 180°

A B

THDC

HT

C

THD

B

A

APPLICATION EXAMPLE ON QLC

HT

C D Ø

0° -

5° 6.55 mm/0.258 in

10° 8.26 mm/0.325 in

15° 9.93 mm/0.391 in

20° 11.56 mm/0.455 in

25° 13.16 mm/0.518 in

30° 14.71 mm/0.579 in

35° 16.26 mm/0.64 in

40° 17.75 mm/0.699 in

45° 19.25 mm/0.758 in

50° 20.73 mm/0.816 in

55° 22.20 mm/0.874 in

60° 23.65 mm/0.931 in

65° 25.07 mm/0.987 in

70° 26.47 mm/1.042 in

75° 27.86 mm/1.097 in

80° 29.21 mm/1.15 in

85° 30.51 mm/1.201 in

90° 31.75 mm/1.25 in

N.B. column D Ø can be used to set gauge pin angles

D Ø


Adjustable micro VFor cylindrical parts smaller than 6.5 mm in diameter.


R-AVM-4 M4 8 mm 25.4 mm 23.8 mm 10 mm

HT

B

A

C

R-AVM-4

B

C

A

HT

42

A wide range of clamps to secure any size part in place using minimal force.

Clamps


Tension clampFor quick and easy clamping.

R-CT-40-30-6R-CT-64-70-6


R-CT-40-25-4 M4 25 mm 42.9 mm 7.6 mm 3.9 mm

R-CT-40-30-6 M6 30 mm 42.9 mm 7.6 mm 3.9 mm

R-CT-40-70-6 M6 68.1 mm 42.9 mm 7.6 mm 3.9 mm

R-CT-64-70-6 M6 68.1 mm 66.4 mm 12.7 mm 5.4 mm

R-CT-95-83-6 M6 82.8 mm 98.5 mm 19.1 mm 8.6 mm

R-CT-40-30-8 M8 30.1 mm 42.9 mm 7.6 mm 3.9 mm

R-CT-40-70-8 M8 68.2 mm 42.9 mm 7.6 mm 3.9 mm

R-CT-64-70-8 M8 68.2 mm 66.4 mm 12.7 mm 5.4 mm

R-CT-95-83-8 M8 80.9 mm 98.5 mm 19.1 mm 8.6 mm

R-CT-160-125-20 1/4-20 1.26 in 1.7 in 0.3 in 0.15 in

R-CT-160-275-20 1/4-20 2.76 in 1.7 in 0.3 in 0.15 in

R-CT-250-275-20 1/4-20 2.76 in 2.62 in 0.5 in 0.21 in

R-CT-375-325-20 1/4-20 3.26 in 3.88 in 0.75 in 0.34 in

N.B. Part number under tension clamp is for reference only. See chart for complete dimensions.

HTHT

B

A

C

Soft tip tension clampRubber coated tips hold parts without scratching or marring the surface of a part.

R-CTT-64-70-6


R-CTT-40-25-4 M4 25 mm 42.9 mm 7.6 mm 3.9 mm

R-CTT-40-30-6 M6 30 mm 42.9 mm 7.6 mm 3.9 mm

R-CTT-40-70-6 M6 68.2 mm 42.9 mm 7.6 mm 3.9 mm

R-CTT-64-70-6 M6 68.1 mm 66.4 mm 12.7 mm 5.4 mm

R-CTT-95-83-6 M6 82.8 mm 98.5 mm 19.1 mm 8.6 mm

R-CTT-40-30-8 M8 30.1 mm 42.9 mm 7.6 mm 3.9 mm

R-CTT-40-70-8 M8 68.2 mm 42.9 mm 7.6 mm 3.9 mm

R-CTT-64-70-8 M8 68.2 mm 66.4 mm 12.7 mm 5.4 mm

R-CTT-95-83-8 M8 80.9 mm 98.5 mm 19.1 mm 8.6 mm

R-CTT-160-125-20 1/4-20 1.26 in 1.7 in 0.3 in 0.15 in

R-CTT-160-275-20 1/4-20 2.76 in 1.7 in 0.3 in 0.15 in

R-CTT-250-275-20 1/4-20 2.76 in 2.62 in 0.5 in 0.21 in

R-CTT-375-325-20 1/4-20 3.26 in 3.88 in 0.75 in 0.34 in

N.B. Part number under soft tip tension clamp is for reference only. See chart for complete dimensions.

HTHT

A

B C

Spring wire clampFor light clamping of small parts, minimising the contact area on a part and for least possible obstruction.

R-CW-50-50-4

Part no. THD HT A B DIA

R-CW-25-25-4 M4 25 mm 38.35 mm 7.9 mm 1.6 mm

R-CW-50-50-4 M4 50 mm 56.85 mm 7.9 mm 1.6 mm

R-CW-25-25-6 M6 23.9 mm 38.35 mm 7.9 mm 1.6 mm

R-CW-50-50-6 M6 50 mm 56.85 mm 7.9 mm 1.6 mm

R-CW-1-1-20 1/4-20 0.94 in 1.51 in 0.31 in 0.06 in

R-CW-2-2-20 1/4-20 1.76 in 2.23 in 0.31 in 0.06 in

N.B. Part number under spring wire clamp is for reference only. See chart for complete dimensions.

HT

A B

DIA

44

Soft tip spring wire clampWith rubber coated tips for light clamping of small parts, minimising the contact area on a part and for least possible obstruction.

R-CWT-25-25-4

Part no. THD HT A B DIA

R-CWT-25-25-4 M4 25 mm 38.35 mm 7.9 mm 1.6 mm

R-CWT-50-50-4 M4 50 mm 56.85 mm 7.9 mm 1.6 mm

R-CWT-25-25-6 M6 23.9 mm 38.35 mm 7.9 mm 1.6 mm

R-CWT-50-50-6 M6 50 mm 56.85 mm 7.9 mm 1.6 mm

R-CWT-1-1-20 1/4-20 0.94 in 1.51 in 0.31 in 0.06 in

R-CWT-2-2-20 1/4-20 1.76 in 2.23 in 0.31 in 0.06 in

N.B. Part number under spring wire clamp is for reference only. See chart for complete dimensions.HT

DIA

HT

DIA

BA

Positional tension clampAllows locking the tension clamp rotational position to avoid

probing interferences from one time to the next.

CB

HT

A

R-CPT-64-58-6


R-CPT-64-58-6 M6 57.2 mm

63.5 mm

12.7 mm

5.4 mm

R-CPTT-64-58-6* M6 57.2 mm

63.5 mm

12.7 mm

5.4 mm

R-CPT-250-225-20 1/4-20 2.25 in 2.5 in 0.5 in 0.21 in

R-CPTT-250-225-20* 1/4-20 2.25 in 2.5 in 0.5 in 0.21 in

* Part number beginning R-CPTT has rubber coated tips.

HT

CB

HT

A

Plunger tip tension clampThis tension clamp contains an adjustable rubber-tipped

plunger to reach over the edge of a part and apply a clamping

force inside a recess.

R-CT-4P-325-20

B

C

A

HTHT

A

B

C


R-CT-100P-83-6 M6 82.8 mm 95.4 mm 19.1 mm 8.6 mm

R-CT-100P-83-8 M8 80.9 mm 95.4 mm 19.1 mm 8.6 mm

R-CT-4P-325-20 1/4-20 3.26 in 3.76 in 0.75 in 0.34 in


��

�

��

�

�

�

Pusher clampTo push a part against standoffs or into corner (two interchangeable tips are included).

R-CP-4

Screw pusher clampFor pushing and holding a part against stops.

R-CSP

Part no. THD HT A B C D ADJ

R-CSP M6/M8/ 1/4-20

76 mm/ 3.0 in

76 mm/ 3.0 in

25 mm/ 1.0 in

44 mm/ 1.75 in

44 mm/ 1.75 in

38 mm/ 1.5 in

Included: socket head cap screw, M6, M8 and 1/4-20 thumbs screw and washer.

Micro vice clampIdeal for holding parts horizontally or vertically. Jaws have a V notch for holding cylindrical and tubular parts.

R-CVM-4

R-CVM-B-20

Part no. THD HT A B C ADJ

R-CVM-4 M4 27.8 mm

37.8 mm

10.2 mm

– 12.7 mm

R-CVM-B-4 (with base)

M4 35.1 mm

51.5 mm

15.9 mm

15 mm 12.7 mm

R-CVM-6 M6 27.8 mm

37.8 mm

10.2 mm

– 12.7 mm


M6 37.8 mm

78.3 mm

20 mm 35 mm 12.7 mm

R-CVM-20 1/4-20 1.1 in 1.49 in 0.4 in – 0.5 in


1/4-20 1.35 in 3.0 in 0.75 in 1.5 in 0.5 in


HT

ADJ

A

B

C

A

C

B

HT

ADJ

INTERCHANGABLE DELRIN® TIP

ADJ

HT

A B

D

THD


R-CP-4 M4 31.2 mm

38.1 mm

19.1 mm

7.9 mm

12.7 mm

9.5 mm

R-CP-6 M6 31.2 mm

38.1 mm

19.1 mm

7.9 mm

12.7 mm

9.5 mm

R-CP-20 1/4-20 1.23 in

1.5 in 0.75 in

0.31 in

0.5 in 0.38 in

Included: socket head cap screw, thumb screw and washer.

��

�

��

�

�

�

C

46

CentresFor holding cylindrical parts at each end on their inside diameters.

R-CC-6

Part no. THD DIA HT A B C ADJ

R-CC-6 M4/M6/ 1/4-20

6.4 mm/ 0.25 in

38 mm/ 1.5 in

22.2 mm/ 0.88 in

50.8 mm/ 2.0 in

20 mm/ 1.10 in

16 mm/ 0.63 in

R-CC-13 M4/M6/M8/ 1/4-20

12.7 mm/ 0.50 in

50.2 mm/ 1.98 in

38.1 mm/ 1.5 in

63.5 mm/ 2.5 in

25 mm/ 1.48 in

38 mm/ 1.5 in

R-CC-25 M4/M6/M8/ 1/4-20

25.4 mm/ 1.0 in

69.2 mm/ 2.73 in

50.8 mm/ 2.0 in

76.2 mm/ 2.0 in

35 mm/ 2.13 in

50 mm/ 1.97 in

Included: both male and female centring options; socket head cap screws.

Tension clamp bracketTo hold a tension clamp on an angle.

R-CTB-25-6

Part no. THD DIA HT A B C

R-CTB-25-6 M6 25.5 mm

6.4 mm

85.7 mm

38.1 mm

31.8 mm

R-CTB-25-8 M8 25.5 mm

6.4 mm

85.7 mm

38.1 mm

31.8 mm

R-CTB-1-20 1/4-20 1.01 in 0.25 in 3.37 in 1.5 in 1.25 in

THDDIA

A

B

C

HT

A

HT

C

B

THDDIA

Mini viceFor clamping a small area of a part. Vice can be rotated 360° and then locked into position.

R-CMV-6

Part no. THD HT A B ADJ

R-CMV-4 M4 57.2 mm 31.8 mm 31.8 mm 11 mm

R-CMV-6 M6 57.2 mm 31.8 mm 31.8 mm 11 mm

R-CMV-8 M8 57.2 mm 31.8 mm 31.8 mm 11 mm

R-CMV-20 1/4-20 2.25 in 1.25 in 1.25 in 0.44 in

N.B. Additional jaws can be purchased for use with any thread size mini vice by ordering part numbers: R-CMV-AJ (aluminum flat jaw) or R-CMV-VAJ (aluminum V jaw).

A

�

��

��

�

�

��

DIA

ADJ

B

CHT

A

HT

ADJ

THDA B


Spring wedge clampDesigned for securing parts using a downwards force, instead of using tension clamps.

R-CWS-6

Part no. THD HT ADJ DIA

R-CWS-6 M6 51.9 mm 9.9 mm 15.9 mm

R-CWS-20 1/4-20 1.97 in 0.39 in 0.63 in

Micro sliding pusher clampFor securing small and delicate parts using a spring pointed Delrin® tip, with minimum force and contact.

R-CPSM-4


R-CPSM-4 M4 29 mm 103 mm 19 mm 25 mm

N.B. Includes socket head cap screws and washers.

Micro centreHas adjustability to hold cylindrical parts up to 26 mm in length and 25.5 mm in diameter.

R-CMC-4

Part no. THD A B C ADJ

R-CMC-4 M4 50.8 mm 31.8 mm 12.7 mm 26 mm

N.B. Includes socket head cap screws and washers.

ADJ

DIA

HT

ADJ HT

B

A

30°

A

CHT

ADJ

B

DIA

48

Micro V spring clampThe clamp has an adjustable spring arm for different diameter parts and also an adjustable end stop (two interchangeable feet are included).

R-CSVM-4


R-CSVM-4 M4 48.5 mm 75 mm 12.4 mm 0-24°

3-jaw clampFor holding round parts at one end or in the middle, allowing the probe around the part without interference.


R-CJ-3 M6/ M8/ 1/4-20

127 mm/ 5 in

178 mm/ 7 in

56.3 mm/ 2.22 in

70 mm/ 2.75 in

19 mm/ 0.75 in

1.5-64.5 mm

Included: socket head cap screws.OD Min = 1.5 mm, OD Max = 64 mm, ID Min = 47 mm, ID Max = 64

R-CJ-3

B

D

A

HT

C

ADJ

HT

C

A B

ADJ

D

Rotating 3-jaw clampFor clamping on inner and outer diameter of part, locking into position then rotated to a marked increment. Not intended for checking part runout.

R-CJR-3

D

ADJ


R-CJR-3 M4/ M6/ 1/4-20

60 mm/ 2.38 in

102 mm/ 4 in

70 mm/ 2.76 in

38 mm/ 1.5 in

6.4 mm

1-63 mm

Included: socket head cap screws and chuck keys.OD Min = 1.5 mm, OD Max = 27 mm, ID Min = 16 mm, ID Max = 55

C

A

HT

B

ADJ

HT

A

B

INTERCHANGABLE FEET


Rotational angle viceProvides quick, convenient staging for a variety of parts, can be mounted directly on the rails of your comparator. Pivot range from 0 to 90° and rotational range of 360°.

Part no. THD HT A (jaws)

R-CRAV M4/M6/1/4-20 91.8 mm/3.64 in 31.5 mm/1.24 in

N.B. Dovetail nuts not included as standard.

R-CRAV

HT

A

CMM plate clampNon-marking clamp for securing 13 mm and 19 mm thick plates to a CMM. Includes screws for M8, M10 and M12 inserts.

R-CPC-190

Part no. THD HT A B C D E

R-CPC-190 M8/M10/M12

34 mm

193 mm

32 mm

90 mm

18.3 mm

11.9 mm

N.B. Set of 2.

C

A

B

HT E D D

A

C

B

EHT

Spring pusher standoff clampDesigned for fixturing small parts in tight or compact space. Ideal for positioning parts and for profile clamping.

R-CSPS-1210-4 R-CSPS-1925-6

Part no. THD DIA HT A

R-CSPS-1210-4 M4 12 mm 10 mm 4 mm

R-CSPS-1515-4 M4 15 mm 15 mm 6.7 mm

R-CSPS-1925-6 M6 19 mm 25 mm 10.7 mm

R-CSPS-1925-8 M8 19.1 mm 25 mm 11 mm

R-CSPS-751-20 1/4-20 0.75 in 1.0 in 0.42 in

HT

DIA

A

HT

DIA

A

50

Adjustable angle slideHold and secure cylindrical/tubular parts at a specific angle. Available with 6 different female/male removable centring pin options for different length parts allowing for maximum access.

R-CCAS

Part no. THD ADJ HT WDTH DPTH ADJ L MAX DIA

R-CCAS M4/ 1/4-20

0-30° 155 mm/ 6.13 in

50 mm/ 2 in

73 mm/ 2.89 in

29 mm/ 1.14 in

Hold down clampFor more clamping force.

R-CH-133-6

R-CH-89-6


R-CH-89-6 M6 41.8 mm

125.3 mm

38.1 mm

35.3 mm

28.6 mm

12.7 mm

R-CH-133-6 M6 49.9 mm

139.4 mm

38.1 mm

49.4 mm

28.6 mm

7.9 mm

R-CH-89-8 M8 41.8 mm

124.2 mm

38.1 mm

35.3 mm

30 mm

12.7 mm

R-CH-133-8 M8 49.9 mm

137.9 mm

38.1 mm

49 mm

30 mm

7.9 mm

R-CH-350-20 1/4-20 1.64 in

4.89 in

1.5 in 1.39 in

1.13 in

0.5 in

R-CH-525-20 1/4-20 1.96 in

5.43 in

1.5 in 1.93 in

1.13 in

0.31 in


�

��

��

��

�

HTADJ

BC

A

D

52

For holding steel or iron parts.

Magnets


MagnetFor holding steel or iron parts.

Part no. THD DIA HT

R-M-6-4 M4 6.4 mm 25 mm

R-M-13-4 M4 12.7 mm 25 mm

R-M-13-6 M6 12.7 mm 25 mm

R-M-19-6 M6 19.1 mm 25 mm

R-M-25-6 M6 25.4 mm 25 mm

R-M-32-6 M6 31.8 mm 25 mm

R-M-13-8 M8 12.7 mm 25 mm

R-M-19-8 M8 19.1 mm 25 mm

R-M-25-8 M8 25.4 mm 25 mm

R-M-32-8 M8 31.8 mm 25 mm

R-M-50-20 1/4-20 0.5 in 1.0 in

R-M-75-20 1/4-20 0.75 in 1.0 in

R-M-1-20 1/4-20 1.0 in 1.0 in

R-M-125-20 1/4-20 1.25 in 1.0 in

R-M-19-6

��

��

DIA

HT

Pin magnetFor holding and locating steel or iron parts.

R-MP-19-6

Part no. THD DIA HT A B

R-MP-6-4 M4 6.4 mm 25 mm 3.8 mm 1.6 mm

R-MP-13-4 M4 12.7 mm 25 mm 3.8 mm 3.2 mm

R-MP-13-6 M6 12.7 mm 25 mm 3.8 mm 3.2 mm

R-MP-19-6 M6 19.1 mm 25 mm 3.8 mm 3.2 mm

R-MP-25-6 M6 25.4 mm 25 mm 3.8 mm 3.2 mm

R-MP-13-8 M8 12.7 mm 25 mm 3.8 mm 3.2 mm

R-MP-19-8 M8 19.1 mm 25 mm 3.8 mm 3.2 mm

R-MP-25-8 M8 25.4 mm 25 mm 3.8 mm 3.2 mm

R-MP-50-20 1/4-20 0.5 in 1.0 in 0.15 in 0.13 in

R-MP-75-20 1/4-20 0.75 in 1.0 in 0.15 in 0.13 in

R-MP-1-20 1/4-20 1.0 in 1.0 in 0.15 in 0.13 in

B

HT

DIA

A

DIA

HT

B

A

Magnetic mini V blockDesigned to hold ferrous cylindrical parts in a V, without the need for additional tension clamps.

R-NTM-1

Part no. HT A B

R-NTM-1 27.9 mm/ 1.1 in

27.9 mm/ 1.1 in

24.9 mm/ 1.1 in

R-M-25-8

R-MP-13-8

A

HT

B

54

V magnet with baseFor holding round and tubular parts.

Part no. THD DIA HT A B C

R-MVB-13-6 M6 12.7 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-19-6 M6 19.1 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-25-6 M6 25.4 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-32-6 M6 31.8 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-19-8 M8 19.1 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-25-8 M8 25.4 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-32-8 M8 31.8 mm

31.4 mm

76.2 mm

19.1 mm

38.1 mm

R-MVB-50-20 1/4-20 0.5 in 1.25 in 3.0 in 0.75 in 1.5 in

R-MVB-75-20 1/4-20 0.75 in 1.25 in 3.0 in 0.75 in 1.5 in

R-MVB-1-20 1/4-20 1.0 in 1.25 in 3.0 in 0.75 in 1.5 in

R-MVB-125-20 1/4-20 1.25 in 1.25 in 3.0 in 0.75 in 1.5 in

Included: socket head cap screws, thumb screws and washers.

R-MVB-25-6

�

��

��°

��

�

�

��

DIA

THD

C

A B

HT

120°

V magnetFor holding cylindrical parts and bent tubing.

R-MV-13-6

��°

��

��

Part no. THD DIA HT

R-MV-13-6 M6 12.7 mm 25 mm

R-MV-19-6 M6 19.1 mm 25 mm

R-MV-25-6 M6 25.4 mm 25 mm

R-MV-32-6 M6 31.8 mm 25 mm

R-MV-13-8 M8 12.7 mm 25 mm

R-MV-19-8 M8 19.1 mm 25 mm

R-MV-25-8 M8 25.4 mm 25 mm

R-MV-32-8 M8 31.8 mm 25 mm

R-MV-50-20 1/4-20 0.5 in 1.0 in

R-MV-75-20 1/4-20 0.75 in 1.0 in

R-MV-1-20 1/4-20 1.0 in 1.0 in

R-MV-125-20 1/4-20 1.25 in 1.0 in

DIA

HT

120°

R-MV-25-8

56

MiscellaneousFind the ideal solution for resting or locating parts.


Resting pinTo rest a part on a rounded point.

AluminiumR-RPA-4

SteelR-RPS-6

Delrin®R-RPD-6

Part no. THD DIA HT Material A

R-RPD-4 M4 6.4 mm 5 mm Delrin® 1.6 mm

R-RPA-4 M4 6.4 mm 5 mm Aluminium 1.6 mm

R-RPD-6 M6 9.5 mm 10 mm Delrin® 1.9 mm

R-RPS-6 M6 9.5 mm 10 mm Steel 1.9 mm

R-RPD-20 1/4-20 0.38 in 0.38 in Delrin® 0.08 in

R-RPS-20 1/4-20 0.38 in 0.38 in Steel 0.08 inHT

DIA

A

HT

DIA

A

ConeTo rest a part on a rounded point for single-point contact.

Delrin®

R-RCD-6Steel

R-RCS-6

AluminiumR-RCA-6

Part no. THD DIA HT Material

R-RCD-6 M6 15.9 mm 12.7 mm Delrin®

R-RCS-6 M6 15.9 mm 12.7 mm Steel

R-RCA-6 M6 25.4 mm 19.1 mm Aluminium

R-RCD-8 M8 15.9 mm 12.7 mm Delrin®

R-RCS-8 M8 15.9 mm 12.7 mm Steel

R-RCA-8 M8 25.4 mm 19.1 mm Aluminium

R-RCS-25-8 M8 25.4 mm 19.1 mm Steel

R-RCS-50-12 M12 50 mm 40 mm Steel

R-RCD-20 1/4-20 0.63 in 0.5 in Delrin®

R-RCS-20 1/4-20 0.63 in 0.5 in Steel

R-RCA-20 1/4-20 1.0 in 0.75 in Aluminium

��

��

DIA

HT

Wedge stopThe wedge stops, typically used in pairs, will locate and hold down a part plus restrict the part from lifting.

R-WS-915-6

Part no. THD DIA A B Material

R-WS-1010-4 M4 10 mm 15 mm 4.7 mm Aluminium

R-WS-915-6 M6 14.5 mm 6.4 mm 19.1 mm Steel

R-WS-37550-20 1/4-20 0.57 in 0.25 in 0.75 in Steel

R-WS-37550-20

A

B

THD

DIA

58

Corner viewerFor allowing a part to be located in a corner. The serrations allow backlighting along the sides of the part.

R-VC-5050-4


R-VC-5050-4 M4 5 mm 50 mm 50 mm 10 mm

R-VC-7575-6 M6 7 mm 82.6 mm 82.6 mm 19 mm

R-VC-33-20 1/4-20 0.25 in 3.25 in 3.25 in 0.75 in

Included: socket head cap screws.

C

B

AHT

THD

Vertical base plateFor holding components vertically.

R-PCV-507540-10-4

Part no. THD HT A B

R-PCV-507540-10-4 M4 63.5 mm 76.2 mm 38.1 mm

THREAD

HT

A B

HT

A B

THD

Screws and adaptersComponent replacement parts.

AATS-20AATK-6 AATS-14 AAS-6ATS-4

Part no. THD DIA HT

Thumb screw

AATK-6 M6 12 mm 20 mm

AATK-20 1/4-20 0.32 in 0.35 in

Screw

AATS-14 M3 6 mm 15 mm

AATS-20 M3 6 mm 20 mm

ATS-4 M4 13 mm 15 mm

Adapter

AAS-4 M4 8 mm 15 mm

AAS-6 M6 8 mm 15 mm

AAS-8 M8 11 mm 17 mm

AAS-20 1/4-20 0.83 in 1.1 in


Adjustable T-armTo support a part on its side.

R-AT-6

Part no. THD DIA HT A B ADJ

R-AT-6 M6 7.8 mm 52 mm 100 mm 12.7 mm 89 mm

12.70

ADJ

DIA

A B

HT

DIAHT

ADJ

A B

B

Micro V blockFor holding small cylindrical parts.

R-VMB-20510

Part no. HT WDTH DPTH

R-VMB-20510 10 mm/0.39 in 20 mm/0.79 in 5 mm/0.2 in

N.B. Set of 2.

Tooling ball For referencing CMM co-ordinates to a program or part.

R-STB-13-6


R-STB-13-6 M6 19.1 mm 41.5 mm 12.7 mm

R-STB-13-8 M8 19.1 mm 41.5 mm 12.7 mm

R-STB-50-20 1/4-20 0.75 in 1.6 in 0.5 inA

HT

DIA

A

HT

DIA

60

Metrology table adapter plateAllows for fitment of any Faro, Romer or Nikon portable CMMs to any Renishaw fixture base plate or metrology table base plate.

Part no. THD HT A B

R-PAACU M6/M8/1/4-20 20 mm/ 0.79 in

200 mm/ 7.87 in

200 mm/ 7.87 in

Included: socket head cap screws, thumb screws and washers.

R-PAACU

HT

A

B

M8 THD1/4-20 THD

M6 THD

62

StandoffsElevate and locate your part into the machine’s working volume with our selection of standoffs.


StandoffTo elevate and locate a part. Available to order in M4, M6, M8, M12 and 1/4-20 thread sizes, component information continues overleaf.

R-S-13100-6R-S-125-4*

Thread

DIA

HT

DIA

THD

HT

Part no. THD DIA HT

M4 standoffs

R-S-65-4* M4 6 mm 5 mm

R-S-610-4* M4 6 mm 10 mm

R-S-615-4* M4 6 mm 15 mm

R-S-620-4* M4 6 mm 20 mm

R-S-625-4* M4 6 mm 25 mm

R-S-95-4* M4 9 mm 5 mm

R-S-910-4 M4 9 mm 10 mm

R-S-915-4 M4 9 mm 15 mm

R-S-920-4 M4 9 mm 20 mm

R-S-925-4 M4 9 mm 25 mm

R-S-950-4 M4 9 mm 50 mm

R-S-125-4 M4 12 mm 5 mm

R-S-1210-4 M4 12 mm 10 mm

R-S-1215-4 M4 12 mm 15 mm

R-S-1220-4 M4 12 mm 20 mm

R-S-1225-4 M4 12 mm 25 mm

R-S-1250-4 M4 12 mm 50 mm

N.B. M4 standoffs are made of aluminium.* = does not have a threaded top.

Part no. THD DIA HT

M6 standoffs

R-S-610-6* M6 6 mm 10 mm

R-S-625-6* M6 6.4 mm 25 mm

R-S-95-6* M6 9 mm 5 mm

R-S-910-6 M6 9.5 mm 10 mm

R-S-915-6 M6 9.5 mm 15 mm

R-S-920-6 M6 9.5 mm 20 mm

R-S-925-6 M6 9.5 mm 25 mm

R-S-1310-6 M6 13 mm 10 mm

R-S-1315-6 M6 12.7 mm 15 mm

R-S-1320-6 M6 12.7 mm 20 mm

R-S-1325-6 M6 12.7 mm 25 mm

R-S-1350-6 M6 12.7 mm 50 mm

R-S-13100-6 M6 12.7 mm 100 mm

R-S-13150-6 M6 12.7 mm 150 mm

R-S-1910-6 M6 19 mm 10 mm

R-S-1915-6 M6 19.1 mm 15 mm

R-S-1920-6 M6 19.1 mm 20 mm

R-S-1925-6 M6 19.1 mm 25 mm

R-S-1950-6 M6 19.1 mm 50 mm

R-S-19100-6 M6 19.1 mm 100 mm

R-S-19150-6 M6 19.1 mm 150 mm

R-S-2515-6 M6 25.4 mm 15 mm

R-S-2520-6 M6 25 mm 20 mm

R-S-2525-6 M6 25.4 mm 25 mm

R-S-2550-6 M6 25.4 mm 50 mm

R-S-25100-6 M6 25.4 mm 100 mm

R-S-25150-6 M6 25.4 mm 150 mm

R-S-3825-6 M6 38.1 mm 25 mm

R-S-3850-6 M6 38 mm 50 mm

R-S-38150-6 M6 38.1 mm 150 mm

N.B. M6 standoffs are made of steel.* = does not have a threaded top.

R-S-1220-4

64

Part no. THD DIA HT

1/4-20 standoffs

R-S-2550-20* 1/4-20 0.25 in 0.5 in

R-S-251-20* 1/4-20 0.25 in 1.0 in

R-S-37525-20* 1/4-20 0.375 in 0.25 in

R-S-37550-20 1/4-20 0.375 in 0.5 in

R-S-37575-20 1/4-20 0.375 in 0.75 in

R-S-3751-20 1/4-20 0.375 in 1.0 in

R-S-5025-20* 1/4-20 0.5 in 0.25 in

R-S-5050-20 1/4-20 0.5 in 0.5 in

R-S-5075-20 1/4-20 0.5 in 0.75 in

R-S-501-20 1/4-20 0.5 in 1.0 in

R-S-502-20 1/4-20 0.5 in 2.0 in

R-S-504-20 1/4-20 0.5 in 4.0 in

R-S-506-20 1/4-20 0.5 in 6.0 in

R-S-7550-20 1/4-20 0.75 in 0.5 in

R-S-7575-20 1/4-20 0.75 in 0.75 in

R-S-751-20 1/4-20 0.75 in 1.0 in

R-S-752-20 1/4-20 0.75 in 2.0 in

R-S-754-20 1/4-20 0.75 in 4.0 in

R-S-756-20 1/4-20 0.75 in 6.0 in

R-S-150-20 1/4-20 1.0 in 0.5 in

R-S-175-20 1/4-20 1.0 in 0.75 in

R-S-11-20 1/4-20 1.0 in 1.0 in

R-S-12-20 1/4-20 1.0 in 2.0 in

R-S-14-20 1/4-20 1.0 in 4.0 in

R-S-16-20 1/4-20 1.0 in 6.0 in

R-S-1501-20 1/4-20 1.5 in 1.0 in

R-S-1502-20 1/4-20 1.5 in 2.0 in

R-S-1506-20 1/4-20 1.5 in 6.0 in

* = standoffs are made of steel.

Standoff continuedTo elevate and locate a part. Available to order in M4, M6, M8, M12 and 1/4-20 thread sizes.

Thread

DIA

HT

DIA

THD

HT

Part no. THD DIA HT

M8 standoffs

R-S-1315-8 M8 12.7 mm 15 mm

R-S-1320-8 M8 12.7 mm 20 mm

R-S-1325-8 M8 12.7 mm 25 mm

R-S-1350-8 M8 12.7 mm 50 mm

R-S-13100-8 M8 12.7 mm 100 mm

R-S-1915-8 M8 19.1 mm 15 mm

R-S-1920-8 M8 19.1 mm 20 mm

R-S-1925-8 M8 19.1 mm 25 mm

R-S-1950-8 M8 19.1 mm 50 mm

R-S-19100-8 M8 19.1 mm 100 mm

R-S-19150-8 M8 19.1 mm 150 mm

R-S-2520-8 M8 25.4 mm 20 mm

R-S-2525-8 M8 25.4 mm 25 mm

R-S-2550-8 M8 25.4 mm 50 mm

R-S-25100-8 M8 25.4 mm 100 mm

R-S-25150-8 M8 25.4 mm 150 mm

R-S-3825-8 M8 38.1 mm 25 mm

R-S-3850-8 M8 38.1 mm 50 mm

R-S-38150-8 M8 38.1 mm 150 mm

N.B. M8 standoffs are made of steel.

R-S-1320-8 R-S-5050-12

Part no. THD DIA HT

M12 standoffs

R-S-3825-12 M12 38 mm 25 mm

R-S-3850-12 M12 38 mm 50 mm

R-S-5025-12 M12 50 mm 25 mm

R-S-5050-12 M12 50 mm 50 mm

R-S-50100-12 M12 50 mm 100 mm

R-S-50200-12 M12 50 mm 200 mm

R-S-50300-12 M12 50 mm 300 mm

N.B. M12 standoffs are made of steel.

R-S-502-20


Delrin® standoffTo elevate and locate a part using a non-marring material.

R-SD-1325-6R-SD-610-4 R-SD-910-4

Thread

DIA

HT

Part no. THD DIA HT

R-SD-610-4* M4 6 mm 10 mm

R-SD-910-4 M4 9 mm 10 mm

R-SD-1210-4 M4 12 mm 10 mm

R-SD-925-6 M6 9 mm 25 mm

R-SD-1325-6 M6 13 mm 25 mm

R-SD-1925-6 M6 19 mm 25 mm

R-SD-3751-20 1/4-20 0.38 in 1.0 in

R-SD-501-20 1/4-20 0.5 in 1.0 in

R-SD-751-20 1/4-20 0.75 in 1.0 in

* = does not have a threaded top.

Pin standoffTo elevate and locate a part against the pin.

R-SP-910-4 R-SP-1325-8


R-SP-610-4 M4 6 mm 10 mm 2.5 mm 2 mm

R-SP-910-4 M4 9 mm 10 mm 2.5 mm 2 mm

R-SP-1210-4 M4 12 mm 10 mm 2.5 mm 2 mm

R-SP-610-6 M6 9.5 mm 10 mm 3.8 mm 1.6 mm

R-SP-910-6 M6 9.5 mm 10 mm 3.8 mm 1.6 mm

R-SP-1325-6 M6 12.7 mm 25 mm 3.8 mm 3.2 mm

R-SP-1925-6 M6 19.1 mm 25 mm 3.8 mm 3.2 mm

R-SP-2525-6 M6 25 mm 25 mm 3.8 mm 3.2 mm

R-SP-1325-8 M8 12.7 mm 25 mm 3.8 mm 3.2 mm

R-SP-1925-8 M8 19 mm 25 mm 3.8 mm 3.2 mm

R-SP-2525-8 M8 25.4 mm 25 mm 3.8 mm 3.2 mm

R-SP-501-20 1/4-20 0.5 in 1.0 in 0.15 in 0.13 in

R-SP-751-20 1/4-20 0.75 in 1.0 in 0.15 in 0.13 in

R-SP-2550-20 1/4-20 0.38 in 0.5 in 0.15 in 0.06 in

R-SP-37550-20 1/4-20 0.38 in 0.5 in 0.15 in 0.06 in

R-SP-11-20 1/4-20 1.0 in 1.0 in 0.15 in 0.13 in

B

A

DIA

HT

DIA

HT

B

A

THD

DIA

HT

DIA

HT

B

A

Delrin® pin standoffTo elevate and locate a part against a pin using a non-marring material.

R-SPD-910-4 R-SPD-1325-6


R-SPD-910-4 M4 9 mm 10 mm 2.5 mm 2 mm

R-SPD-1325-6 M6 12.7 mm 25 mm 3.8 mm 3.2 mm

R-SPD-501-20 1/4-20 0.5 in 1.0 in 0.15 in 0.13 inB

A

DIA

HT

DIA

HT

B

A

66

R-S-2550-2W-6 R-S-2550-4W-6

2-way and 4-way spring-loaded pin standoffFor locating within a hole or slot of a part.

Part no. THD DIA HT A B ADJ

2-way pins

R-S-1350-2W-6 M6 13 mm 50 mm 2 mm 9 mm 12.5 mm

R-S-2550-2W-6 M6 25 mm 50 mm 7 mm 19 mm 12.5 mm

R-S-2550-2W-8 M8 25 mm 50 mm 7.1 mm 19 mm 12.5 mm

R-S-502-2W-20 1/4-20 0.50 in 2.0 in 0.08 in 0.35 in 0.50 in

R-S-12-2W-20 1/4-20 1.0 in 2.0 in 0.28 in 0.75 in 0.50 in

4-way pins

R-S-1350-4W-6 M6 13 mm 50 mm 2 mm 9 mm 12.5 mm

R-S-2550-4W-6 M6 25 mm 50 mm 7 mm 19 mm 12.5 mm

R-S-2550-4W-8 M8 25 mm 50 mm 7.1 mm 19 mm 12.5 mm

R-S-502-4W-20 1/4-20 0.50 in 2.0 in 0.08 in 0.35 in 0.50 in

R-S-12-4W-20 1/4-20 1.0 in 2.0 in 0.28 in 0.75 in 0.50 in

��

��

�

�

��

DIA

ADJ

HT

B

A

Standoff adapterFor step clamps and calibration sphere.

R-SA-6-8

Part no. THD DIA HT A (top THD)

R-SA-14-4 M4 19.1 mm 15 mm 1/4-20

R-SA-6-4 M4 19.1 mm 15 mm M6

R-SA-8-4 M4 19.1 mm 25 mm M8

R-SA-4-6 M6 9.5 mm 15 mm M4

R-SA-8-6 M6 25.4 mm 25 mm M8

R-SA-10-6 M6 25.4 mm 25 mm M10

R-SA-14-6 M6 25.4 mm 25 mm 1/4-20

R-SA-6-8 M8 25.4 mm 25 mm M6

R-SA-14-8 M8 25.4 mm/1.0 in 25 mm/0.98 in 1/4-20

R-SA-10-8 M8 25.4 mm 25 mm M10

R-SA-8-12 M12 25.4 mm 25 mm M8

R-SA-4-20 1/4-20 9.5 mm/0.375 in 12.7 mm/0.50 in M4

R-SA-6-20 1/4-20 25.4 mm/1.0 in 25.4 mm/1.0 in M6

R-SA-8-20 1/4-20 25.4 mm/1.0 in 25.4 mm/1.0 in M8

R-SA-10-20 1/4-20 25.4 mm/1.0 in 25.4 mm/1.0 in M10

R-SA-12-58 5/8-11 50.8 mm/2.0 in 50 mm/1.97 in M12

Rotator standoff To secure parts against stops/supports.

R-SR-2525-6


R-SR-2525-6 M6 25 mm 25 mm 19 mm

R-SR-11-20 1/4-20 1.0 in 1.0 in 0.76 in

THD

HT

DIA

A

HT

DIA

ADJ

HT

THD

DIA

360°

68

Suction cupsOur range of suction cups can be used to hold plastic, glass, polystrene and other non-ferrous parts, contoured surfaces, cylindrical tubes and shafts.


Suction cupFor holding plastic, glass, polystyrene and other non-ferrous parts.

R-CS-20-6 R-CS-30-6 R-CS-50-6


R-CS-5-6 M6 18.8 mm 35 mm 5.7 mm

R-CS-10-6 M6 18.8 mm 45 mm 11 mm

R-CS-20-6 M6 31.5 mm 45 mm 22 mm

R-CS-30-6 M6 44.2 mm 65 mm 34 mm

R-CS-50-6 M6 69.6 mm 65 mm 53 mm

R-CS-5-20 1/4-20 0.74 in 1.38 in 0.22 in

R-CS-10-20 1/4-20 0.74 in 1.75 in 0.43 in

R-CS-20-20 1/4-20 1.24 in 1.75 in 0.87 in

R-CS-30-20 1/4-20 1.74 in 2.5 in 1.34 in

R-CS-50-20 1/4-20 2.74 in 2.5 in 2.09 in

N.B. Requires R-CSH-MSC, available separately.


R-CES-10-6 M6 18.8 mm 41.7 mm 11 mm

R-CES-20-6 M6 31.5 mm 49.4 mm 22 mm

R-CES-30-6 M6 31.5 mm 56.6 mm 34 mm

R-CES-50-6 M6 31.5 mm 66.6 mm 53 mm

R-CES-10-20 1/4-20 0.74 in 1.64 in 0.43 in

R-CES-20-20 1/4-20 1.24 in 1.94 in 0.87 in

R-CES-30-20 1/4-20 1.24 in 2.23 in 1.34 in

R-CES-50-20 1/4-20 1.24 in 2.26 in 2.09 in


Exposed suction cupFor holding contoured surfaces.

R-CES-20-6R-CES-10-6 R-CES-30-6

A

HT

DIA

A

HT

DIA

DIA

HT

A

A

HT

DIA

Suction V cupFor holding cylindrical tubes and shafts.


R-CVS-5-6 M6 19 mm 35 mm 5 mm 90°

R-CVS-10-6 M6 19 mm 41 mm 10 mm 120°

R-CVS-20-6 M6 31 mm 51 mm 20 mm 120°

R-CVS-30-6 M6 44 mm 76 mm 30 mm 120°

R-CVS-50-6 M6 70 mm 89 mm 50 mm 120°

R-CVS-5-20 1/4-20 0.74 in 1.46 in 0.22 in 90°

R-CVS-10-20 1/4-20 0.74 in 1.62 in 0.43 in 120°

R-CVS-20-20 1/4-20 1.24 in 2.0 in 0.87 in 120°

R-CVS-30-20 1/4-20 1.74 in 2.98 in 1.34 in 120°

R-CVS-50-20 1/4-20 2.74 in 3.5 in 2.09 in 120°


R-CVS-5-6 R-CVS-20-6

B

A

HT

DIA

A

HT

DIA

B

70

R-CSH-MSC

Vacuum pumpFor suction cups with on/off valve, hose connector and quick disconnect.

R-CSVP

Manifold6-port or 10-port manifold can be used vertically or horizontally on base plate.

R-CSM-10P

Vacuum hoseHose for connecting manifold to vacuum pump and to suction cups.

Part no. Description

R-CSVP Vacuum pump assembly

N.B. Requires R-CSH-MP, available separately.

Part no. Description HT A B C

R-CSM-6P 6-port manifold 52 mm 121 mm

25 mm 67 mm

R-CSM-10P 10-port manifold 52 mm 197 mm

25 mm 67 mm

N.B. Requires R-CSH-MP and R-CSH-MSC, available separately.

Part no. Description

R-CSH-MP 9.5 mm dia. hose to connect manifold to vacuum pump (sold per 1 m)

R-CSH-MSC 6.4 mm dia. hose to connect manifold to suction cups (sold per 1 m)

R-CSH-MSC

B

A

C

HT

A

HT

C

B


Suction cup trayFor holding and organising suction cups.

R-TCS-300200

Part no. THD HT WDTH DPTH

R-TCS-300200 M6 25.4 mm 304.8 mm 190.5 mm

R-TCS-300200 1/4-20 1.0 in 12.0 in 7.5 in

N.B. Tray is compatible with both M6 or 1/4-20 suction cup components.

72

TowersOur towers can be used to fixture large components or to hold a part vertically.


TowerTo hold a part vertically.

R-T-50600-8 R-T-35450-6 R-T-35300-8 R-T-25150-6

��

��

�

�

�

Part no. THD HT A B C THDRows

R-T-2080-4 M4 80 mm 75 mm 20 mm 20 mm 2 / 1*

R-T-25150-6 M6 150 mm

127 mm

25 mm 25 mm 1

R-T-25300-6 M6 300 mm

127 mm

25 mm 25 mm 1

R-T-35300-6 M6 300 mm

152 mm

51 mm 35 mm 2

R-T-35450-6 M6 450 mm

152 mm

51 mm 35 mm 2

R-T-50600-6 M6 600 mm

152 mm

51 mm 50 mm 2

R-T-50750-6 M6 760 mm

152 mm

51 mm 50 mm 2

R-T-25150-8 M8 150 mm

127 mm

25 mm 25 mm 1

R-T-25300-8 M8 300 mm

127 mm

25 mm 25 mm 1

R-T-35300-8 M8 300 mm

152 mm

51 mm 35 mm 2 / 1*

R-T-35450-8 M8 450 mm

152 mm

51 mm 35 mm 2 / 1*

R-T-50600-8 M8 600 mm

152 mm

51 mm 50 mm 2

R-T-50750-8 M8 760 mm

152 mm

51 mm 50 mm 2

R-T-16-20 1/4-20 6.0 in 5.0 in 1.0 in 1.0 in 1

R-T-112-20 1/4-20 12.0 in 5.0 in 1.0 in 1.0 in 1

R-T-1512-20 1/4-20 12.0 in 6.0 in 2.0 in 1.5 in 2

R-T-1518-20 1/4-20 18.0 in 6.0 in 2.0 in 1.5 in 2

R-T-224-20 1/4-20 24.0 in 6.0 in 2.0 in 2.0 in 2

R-T-230-20 1/4-20 30.0 in 6.0 in 2.0 in 2.0 in 2

Included: socket head cap screws.* Two sides have two rows of holes and two sides have one row of holes in the

centre.

B

C

A

HT

THD

74

Tower block with baseFor positioning a component vertically to the part set-up. Can be used without the base to allow full rotation.

�

��

�

��

�

�

Part no. THD HT A B C D

R-TB-1619-4 M4 26.4 mm

41.3 mm

15.9 mm

15.9 mm

15 mm

R-TB-2025-6 M6 35 mm

70 mm

20 mm

20 mm

35 mm

R-TB-2530-8 M8 40 mm

88.9 mm

25 mm

25 mm

45 mm

R-TB-751-20 1/4-20 1.25 in

2.75 in

0.75 in

0.75 in

1.5 in

Included: socket head cap screws.

R-TB-2530-8

HT

A

D C

B

THD

76

TraysTo hold and organise fixturing components.


Large component trayTo hold and organise components.

R-TC-560500

Medium component trayTo hold and organise components.

Part no. THD HT LNGTH WDTH

R-TC-560500 M6/M8/ 1/4-20

25 mm/ 1 in

560 mm/ 21.5 in

500 mm/ 20 in


R-TC-500200 M6/M8/ 1/4-20

25 mm/ 1 in

500 mm/ 20 in

200 mm/ 8 in

R-TC-500200

Small component trayTo hold and organise components.

R-TC-300190-4 R-TC-300200


M4 component tray

R-TC-300190-4 M4 25 mm 300 mm 190 mm

M6/M8 component tray

R-TC-300190-6 M6 25 mm 300 mm 190 mm

R-TC-300200* M6/M8/ 1/4-20

25 mm/ 1 in

300 mm/ 12 in

200 mm/ 8 in

1/4-20 component tray

R-TC-300190-20 1/4-20 1 in 12 in 8 in

*Designed to hold 1.5 in/38 mm dia. standoffs.

R-TC-300190-20

78

Component storage boxCompartment box to hold and organise components.

Part no. HT LNGTH WDTH

R-BC10 40 mm 200 mm 135 mm

R-BC10

RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.

© 2019-2021 Renishaw plc. All rights reserved. Renishaw reserves the right to change specifications without notice.RENISHAW and the probe symbol used in the RENISHAW logo are registered trade marks of Renishaw plc in the United Kingdom and other countries. apply innovation and names and designations of other Renishaw products and technologies are trade marks of Renishaw plc or its subsidiaries. All other brand names and product names used in this document are trade names, trade marks or registered trade marks of their respective owners.

About Renishaw

Renishaw is an established world leader in engineering technologies, with a strong history of innovation in product development and manufacturing. Since its formation in 1973, the company has supplied leading-edge products that increase process productivity, improve product quality and deliver cost-effective automation solutions.

A worldwide network of subsidiary companies and distributors provides exceptional service and support for its customers.

Products include:

• Additive manufacturing and vacuum casting technologies for design, prototyping, and production applications

• Dental CAD/CAM scanning systems and supply of dental structures

• Encoder systems for high-accuracy linear, angle and rotary position feedback

• Fixturing for CMMs (co-ordinate measuring machines), vision machines and Equator™ gauging systems

• Gauging systems for comparative measurement of machined parts

• High-speed laser measurement and surveying systems for use in extreme environments

• Laser and ballbar systems for performance measurement and calibration of machines

• Medical devices for neurosurgical applications

• Probe systems and software for job set-up, tool setting and inspection on CNC machine tools

• Raman spectroscopy systems for non-destructive material analysis

• Sensor systems and software for measurement on CMMs

• Styli for CMM and machine tool probe applications

For worldwide contact details, visit www.renishaw.com/contact

T +44 (0) 1453 524524F +44 (0) 1453 524901E [email protected]

www.renishaw.com

Renishaw plc

New Mills, Wotton-under-EdgeGloucestershire, GL12 8JRUnited Kingdom

Part no.: H-1000-9971-03-A Issued: 05.2021

*H-1000-9971-03*

Technical specification: Renishaw Metrology Fixturing

Documents

Transcript of Technical specification: Renishaw Metrology Fixturing