393. Foundry equipment

Sale Information

Number of items : 47

Location : Hoeilaart (Belgium)

Start date : 03 March 2015 as from 17:00

End date : 10 March 2015 as from 18:30

Viewing day : 03 March 2015 from 15:00 to 17:00

Overijsesteenweg, 74

1560 Hoeilaart (BE)

Removal day : 20 March 2015 from 12:00 to 16:30

Overijsesteenweg, 74

1560 Hoeilaart (BE)

WWW.AUCTELIA.COM

The General Terms and Conditions and the Specific conditions of sale apply to this online Auction

SPECIFIC CONDITIONS - 393. Foundry equipment

START DATE 03 March 2015 as from 17:00

END DATE 10 March 2015 as from 18:30

VIEWING 03 March 2015 from 15:00 to 17:00

Overijsesteenweg, 74

1560 Hoeilaart (BE)

REMOVAL 20 March 2015 from 12:00 to 16:30

Overijsesteenweg, 74

1560 Hoeilaart (BE)

In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows

on the removal day the proforma invoice and signs the delivery note.

WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots.

WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and

transport costs will be charged.

AUCTION FEES Auction Fees (based on Final Selling Price per Piece)

- Amounts less than €15,000 17% of the final selling price

- Amounts more than €15,000 12% of the final selling price

VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees

PAYMENT Within 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the

bank account below and mention the invoice number:

Auctelia

ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB

BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB

ORGANIZER AUCTELIA

Rue Emile Francqui, 1

1435 Mont-Saint-Guibert (BE)

+ 32 (0)10/620.660

+ 32 (0)10/620.661

SUPERVISION This online Auction sale is held under the supervision of court Bailiff Alain BORDET, 4031 Angleur-Lige and/or court Bailiff

Marcel MIGNON, 6870 Saint-Hubert.

EXTENSION OF

ONLINE AUCTIONIf there is at least one Bid within the last 5 minutes of a sale, the closing time is extended by 5 minutes until there is no more

Bid.

If no Bid has been placed on a Lot, then the closing time of the sale of this Lot is extended by 20 minutes.

ATTRIBUTION OF LOTS Within 48 hours of the closing of the Auction (Saturdays, Sundays and Belgian public holidays not included), the Candidate-

Buyer receives confirmation of purchase by e-mail on behalf of the Seller that the Sales contract has been materialised. If the

Candidate-Buyer has not received an e-mail of confirmation within this delay, this means that their Bid did not result in an

Attribution.

TERMS AND

CONDITIONSThe General Terms and Conditions and the Specific conditions apply to this online Auction, as you can find on the website

www.auctelia.com.

TO THE ATTENTION OF

THE CANDIDAT-

BUYER/BUYER

Lots are sold as they are, in the state they are in on the date of Attribution or of the Sales contract, with all the benefits and

burdens attached thereto. Auctelia SA and/or the Seller provide no guarantee relating to hidden or visible defects, nor does it

provide guarantees relating to the wholeness, quantities, the working and/or the usefulness. Defects of any nature

whatsoever, the disappointed expectations of the Buyer or third party buyers do not give right to compensations, damages

and/or settlement. Given that Lots can be viewed before the Sale or the Auction and that the Terms and Conditions are

known to the Buyer, the Buyer is deemed to have carefully examined the Lots, prior to purchase. The Buyer examines the

Lots at his own risk.

TRANSLATION In the case of a discrepancy between translations of these Specific conditions and the original French version of these

Specific conditions, the French version prevails.

Photos Description Start price

ID : 393-019 Mitutoyo 3D Bench measurementMake : Mitutoyo

Model : B 706

3D Bench measurement

Brand: Mitutoyo

Model: B 706

Overall dimensions: 140 cm x 162 cm x 260 cm

Marble Dimensions: 128 cm x 104 cm x 26 cm

Travel axes (X x Y x Z) : 700 x 600 x 450 mm

max. workpiece hight : 570 mm

max. workpiece weight : 500 kg.

Table height / gooseneck: 68 cm

 

Supplied with:

Measuring head Renishaw

Type: MIH

Feelers, ...

 

PC Geopak II program

Program runs under DOS

 

Note: This material is in a cramped laboratory, exit through an opening to recreate

(partition), handling and lifting are the responsibility of the purchaser and under its

responsibility

The prospective purchaser is required to be on site the day of the visits to provide that

necessary to remove this material

4 500,00 €

Photos Description Start price

ID : 393-048 Renishaw probe headMake : Renishaw

Model : MP7

Renishaw probe head

Brand: Renishaw

Type: MP7

Mounted on BT40 taper

Supplied with stylus

Mounting CNC to take part zero points

450,00 €

ID : 393-047 Clamping elements

Clamping elements for attachment to table (room for template)

250,00 €

Photos Description Start price

ID : 393-049 Welding semi-automatic Kemppi Kempomat 2500Make : Kemppi

Model : Kempomat 2500

Compact semi-automatic welding installation air cooled

Brand: KEMPPI (FINLAND)

Type: Kempomat 2500

No Series: 6214250 847620 G

Year: 1998 (very little use <100h)

Including:

- Power Source "Kempomat 2500" 220 / 380V

- Trolley bottle and primary cable 5m. Without plug.

- Complete Ground cable 50mm2, 5m

- Pressure regulator

- Torch Binzel MB 26KD, 3m

> Comes with consumables:

- 2 gas bottles (85% Ar + 15% CO2)

- Started with 4 coils (steel wire & fouré - steel wire)

+ 1 coil in the machine (steel wire)

Specifications:

Rated voltage 230V / 400V

Of 3-230V Voltage: 220V 240V -10% + 6%

Duty cycle: 30% 9.2kVA EDCharge max. : 250A / 26V 30% ED

Settings range: 40 - 250A / 14 - 26V

NB adjustment positions: 10 positions

Unwinding mechanism: 2 wheels

Wire feed speed: 0 ... 18m / min

Son used: 0.6 ... 1.0mm - dia stainless steel / 0.8 ... 1.2mm - dia cored wire / 1.0 ... 1.2

mm dia Alu

Max weight of coil: 20Kg

Max Dia of coil: 300mm dia

Temperature class H (180 ° C)

Degree of protection: IP 23C

Dimensions: Length 930mm / width 440mm / 860mm height

Weight: 80kg

500,00 €

Photos Description Start price

ID : 393-001 Hydraulic GroupMake : Vem

Model : KMER 225 54

Hydraulic Group

Including pumps, tank, pressure tank, heat exchanger oil / water

Overall dimensions: 250 cm x 300 cm x 240 cm

Main pumps VEM

Quantity: 3

Type: KMER 225 54

Power output: 37 kW

Power supply: 220/380 V

Unit weight: 270 kg

Oil tank

Included electric heaters

Capacity: + - 2000 liters

Annex pump Eltemek

Type: AIS112

Power: 4 kilowatts

Power supply:

Weight: 35 kg

Year 1996

Accumulator pressure

Brand: Kunkel-Wagner

Year: 1982

Pressure: 80 bar

Dismantling and moving charged to the purchaser

2 500,00 €

ID : 393-002 CompAir L 45 SR CompressorMake : ComptAir

Model : L 45 SR

CompAir compressor

Type: L 45 SR

Voltage: 380 V AC

Power: 58 kilowatts

M³ / min: 5.93 to 7.9

Hours: +/- 22000

Dimensions: 142 cm x 100 cm x 166 cm

Dismantling and removal charged to the purchaser

<strong>The tank located above is not part of the batch</strong>

Dismantling and moving charged to the purchaser

3 500,00 €

Photos Description Start price

ID : 393-003 Thermco FurnaceMake : Thermco

Model : FTT45-50

Industrial furnace

Brand: Thermco

Type: FTT45-50

Year: 1986

Voltage: 380 V AC

Operating hours: 36,839 hours

Overall dimensions: 190 cm x 180 cm x 174 cm

Internal dimensions of the oven: 102 cm x 50cm x 50cm

In working order

Dismantling and moving charged to the purchaser

750,00 €

ID : 393-004 Robuschi Vacuum PumpMake : Robuschi

Model : RV25/TM/CT

Robuschi vacuum pump

Type: RVS25 / TM / CT

FEV Engine

Type: KMER 180 L4

Power: 22 kilowatts

Power supply: 220/380 V

Weight: 170 kg

Dimension Dimension: 170 cm x 40 cm x 80 cm

Dismantling and moving charged to the purchaser

800,00 €

ID : 393-005 Demag Slewing jibs and hoistsMake : Demag

Model : PK2N

Stem and hoists

Brand: Demag

Load: 500 kg

Arm length: 400 cm

Height: 400 cm

Type: PK2N

Power supply: 220 V single phase / three phase 380 V

Power: 0.57 kilowatts

Year: 1970

Dismantling and moving charged to the purchaser

500,00 €

Photos Description Start price

ID : 393-006 Axmann Sand MixerMake : Axmann

Model : SBS5W

Sand mixer

Brand: Axmann

Type: SBS5W

Voltage: 220V AC (check)

Year: 1981

Operating hours: 1957 hours

Dismantling and moving charged to the purchaser

1 500,00 €

ID : 393-007 Vacuum Pump and TankMake : Sihi

Model : LPHY65327BN134.02

Vacuum pump

Make : Sihi

Model : LPHY65327BN134.02

Engine : VEM

Type: KMER 180 L4

Power: 22 kilowatts

Power supply: 220/380 V

Weight: 170 kg

Tank capacity: + - 800 liters

Overall dimensions: 170 cm x 140 cm x 200 cm

Dismantling and moving charged to the purchaser

650,00 €

ID : 393-008 Demag Slewing jibs and hoistsMake : Demag

Model : PK2-F

Slewing jibs and hoists

Brand: Demag

Type: PK2-F

Power supply: 220 V single phase / 380 V trpihasé

Power: 0.5 kilowatts

Year: 1968

Load: 500 kg

Total height: 350 cm

Arm length: 300 cm

Dismantling and moving charged to the purchaser

350,00 €

Photos Description Start price

ID : 393-010 Vogel and Schemmann Cast Iron Core machineMake : Vogel&Schenmann

Model : KSM6.40.00CB

Cast iron core machine 

Brand: Vogel & Schemmann

Type: KSM6.40.00CB

Year: 1981

Dismantling and moving are under the responsibility of the buyer

2 000,00 €

ID : 393-009 10000L Oil tank

Oil tank 10.000 L

Type: Double wall tank

Year: 1999

Dimensions:

L: 400 cm

H: 300 cm

Diameter: 200 cm

Leak detector included

Dismantling and pick up are under the responability of the buyer

500,00 €

Photos Description Start price

ID : 393-012 Horizontal Graziano LatheMake : Graziano

Model : AK132M 74 N

Horizontal Lathe

Brand: Graziano

Engine: ACEC

Type: AK132M 74N

Power supply: 220 V / 380 V

Power: 7.5 kilowatts

Dimensions: 330 cm x 130 cm x 145 cm

Length between ends: 135 cm

Cam-Lock D1-6 "

 

1 hydraulic 3-jaw chuck AUTOBLOK (mounted on the machine)

compact series Integrated Cylinder

Type 250 CD - Diam bar passage. 50mm

 

1 Hydraulic chuck jaws 4 fixing Cam-Lock 6 "

 

Hydraulic-tip against SAUTER HZR8

 

Turret "Rapid"

 

Hydraulic pump HOB.26 2 connecting pairs

Set of tools included

Dismantling and pick up under the responsibility of the buyer

350,00 €

Photos Description Start price

ID : 393-013 Conveyor Belt - Hoppers - Pouring Bucket

Conveyor belt , hoppers, pouring bucket

Conveyor belt:

Length: 600 cm +/-

Width between band edges: 30 cm

Width: 73 cm

Hoppers and its rail:

Rail:

Length: 500 cm

Maximum length between hoppers : 330 cm

Width: 50 cm

Double Hoppers:

Height: 145 cm

Width: 50 cm

Length: 250 cm

Hydraulic Draining

Pouring bucket:

Height: 50 cm

650,00 €

ID : 393-014 La Roche Mechanical Sheetmetal Press

La Roche Mechanical Sheetmetal Press

Voltage: 230 V three-phase

Dimensions: 133 cm x 73 cm x 80 cm

Automatic stop limit switch

Bending diameter: 3.5 cm solid steel

Profile rack included with the lot

Dimensions: 123 cm x 52 cm x 90 cm

Jigs included

Dismantling and pick up are at the buyer's responsibilty

800,00 €

ID : 393-015 Demoor Horizontal LatheMake : Demoor

Model : AK132M 74 N

Horizontal Lathe

Brand: Demoor

ACEC Engine

Type: AK132M 74N

Power supply: 220 V / 380 V

Power: 7.5 kilowatts

Overall dimensions: 330 cm x 130 cm x 145 cm

Length between centers: 135 cm

Set of tools included

Dismantling and pick up under buyer's responsibility 

350,00 €

Photos Description Start price

ID : 393-017 Demag Electric Hoist - 500 KgMake : Demag

Model : PK2N 16/5P2K

Electric chain hoist 500 kg

Brand : Demag

Type: PK2N 16 / 5P2K

Building Year: 1976

Voltage: AC 220/380 V

Power: 0.5 kilowatts

Chain movement height: 220 cm

Condition: tested  - in working condition

Note: the support arm is not included in this lot

250,00 €

ID : 393-018 Vibrating TableMake : Curtis Vibrators

Model : RVT30/72/820

Vibrating Table

Voltage: 230V/380V three-phase

Dimensions: 213 cmx92 cm x 60 cm

Dismantling and pick up are under buyer's responsibility

350,00 €

ID : 393-020 Demag Electric Hoist - 500 kgMake : Demag

Model : PK2 16/5P2K

Demag electric hoist 500 kg

Type: PK2 16 / 5P2

Building Year: 1968

Voltage: AC 220/380 V

Power: 0.5 kilowatts

Chain movement Height: 220 cm

Condition: tested and in working condition

Remark: the support arm is not included in this lot

150,00 €

ID : 393-021 Demag 500 kg Electric hoistMake : Demag

Model : PK2N 16/5P2K

Demag electric hoist 500 kg

Type: PK2N 16 / 5P2K

Year built: 1976

Voltage: AC 220/380 V

Power: 0.5 kilowatts

Height of chain movement: unknown but in principle 230 cm

State: Not tested

Note: the support arm is not part of the batch

150,00 €

Photos Description Start price

ID : 393-022 Demag 250 kg Electric hoistMake : Demag

Model : PK1P 13/3P2-8K

Demag 250 kg electric hoist 

Type: PK1P 13/3 K P 2-8

Year built: 1968

Voltage: AC 220/380 V

Power: 0.2 kilowatts

Chain movement Height: Unknown

State: Not tested

Note: the support arm is not part of the batch

150,00 €

ID : 393-023 Meili 1T Electric hoistMake : Meili

Model : EF 2 527 2 brins

Meili 1T electric hoist 

Type: EF 2527 2 sprigs

Year built: 1985

Voltage: AC 220/380 V

Chain movement Height: Unknown

Status: not tested, but off Voltage is functional

200,00 €

ID : 393-024 Conveyor Belts

Conveyor belts

Voltage: AC 220/380 V

Band Width: 50 cm

External width: 90 cm Overall

Lengths:

1 x 700 cm

1 x 620 cm

1 x 315 cm

Band Width: 40 cm

External width: 82 cm Overall

Lengths:

1 x 390 cm

500,00 €

ID : 393-025 Castolin Eutectic Charger MetallicMake : Castolin Eutectic

Model : Rototec 80

Apparatus for charging metal

Brand :Eutectic Castolin

Type: Rototec 80

The apparatus for refilling axes

Condition: very close to the new 

250,00 €

Photos Description Start price

ID : 393-026 Cone-shaped Drill holders and Cutters

Cone-shaped  drill holders and cutters 

Cone BT 40

Amount: 7

Condition: new

This lot is located on the tablet No. - 426

100,00 €

ID : 393-027 Bits and Cutters

Various bits and cutters

This lot is located on the tablet No. - 426

100,00 €

ID : 393-028 Platelets

Various platelets

This lot is located on the tablet No. - 426

100,00 €

ID : 393-029 Platelets - Bits

Various platelets, bids

This lot is located on the tablet No. - 425

100,00 €

ID : 393-030 Platelets, Mills, Pliers

Platelets, mill, pliers

This lot is located on the tablet No. - 425

100,00 €

ID : 393-031 Cutter Insert HolderMake : Iscar

Cutter insert holder

1 x Iscar

1 x Walter

This batch is situated on the tablet nr. 427

100,00 €

ID : 393-032 Cutters -Bits

Cutters, various bits ...

This batch is situated on the tablet nr. 456

100,00 €

Photos Description Start price

ID : 393-033 Toolholders Seco - Kennametal ToolsMake : Seco

Toolholders Seco, Kennametal tools, etc.

This batch is situated on the tablet nr. 455

100,00 €

ID : 393-034 Toolholders Seco - Sandvik - Kennametal

Toolholders Seco, Kennametal tools, etc.

This batch is situated on the tablet nr. 454

100,00 €

ID : 393-035 Toolholders Seco - Sandvik - KennametalMake : Sandvik

Toolholders Seco, Sandvik, Kennametal, etc.

This batch is situated on the tablet nr. 453

80,00 €

ID : 393-036 Sandvik knives - KennametalMake : Sandvik

Knives Sandvik, Kennametal, etc.

This lot is on a roller side table

80,00 €

ID : 393-037 Tyrolit stone for GrinderMake : TYROLIT

Tyrolit Stones for grinder

Diameter: 50 cm

Thickness: 5 cm

Bore size: 4.5 cm

Quantity: 5

This batch is situated on the tablet nr. 443

90,00 €

ID : 393-038 Tyrolit Stones for GrinderMake : TYROLIT

Tyrolit Stones for grinder

Diameter: 30 cm

Thickness: 4 cm

Bore size: 3 cm

Quantity: 7

Diameter: 30 cm

Thickness: 2.7 cm

Bore size: 2.5 cm

Quantity: 3

This set is sitiated on the nr. 444 tablet

50,00 €

Photos Description Start price

ID : 393-039 Double Grinding Machine

Double grinding machine

Voltage: 220V AC

Maximum stone diameter: 50 cm

Condition: tested  - working

100,00 €

ID : 393-040 Drilling Bushings

Drilling bushings

Set in 15 wooden bins

Those drilling bushes are used for jig drilling

300,00 €

ID : 393-041 Double Barrel Holder

Double barrel holder

Quantity: 5

Capacity barrels: 200 L

Dimensions: 127 cm x 76 cm x 28 cm

30,00 €

ID : 393-042 Joos Single Grinding MachineMake : Joos

Model : ES 6-60 R

Joos  Single Grinding Machine 

Type: R ES 6-60

Voltage: 220V - 3-phase

Diameter of the stone: 50 cm

Condition: tested -  in working

150,00 €

ID : 393-043 Oils & double barrel holder

Oils & double barrel holder

1 x Univis HP 46, 200 L, encapsulated

1 x UNIL HFO 46, 200 L, encapsulated

2 x barrels non - identified, one was encapsulated, 1 was started

2 x barrel holders

100,00 €

ID : 393-044 Double Barrel Holder

Double barrel holders

Number: 8

Capacity of barrels: 200 L

Dimensions: 127 cm x 76 cm x 28 cm

25,00 €

Photos Description Start price

ID : 393-045 Oils & double barrel holderMake : Shell

Oils & double barrel holder

1 x Shell Oil Dromus B, L 200, encapsulated

1 x Shell Oil Volvota 1000, 200 L, encapsulated

1 x Shell Spiros, started

1 x Shell Donox, started

2 x barrel holders

100,00 €

ID : 393-046 Double barrel holders

Double barrel holders

Number: 10

Capacity of barrels: 200 L

Dimensions: 127 cm x 76 cm x 28 cm

50,00 €

WHY SELL YOUR USED EQUIPMENT WITH AUCTELIA ?

QUALITY DEALS

Auctelia is deal-focused:95% of listed equipment have been sold. We only earn our fee if you make a sale.

BEST PRICE

Online auction is one of the best way to reach the market price.

You always win.

SHORT TIME

Online auction accelerates sales so you save time and stay focused

on your own business.

info@auctelia.com

+31-85-4002222

+32-10-620660

www.auctelia.com/sell

Contact us!

References

95%

25.000+

of listed equipmenthave been sold

buyers & sellers

30 targeted countries