PERSIAPAN 1 PERSIAPAN ................................................................................................................. - 2 1.1 MELEPAS BATERAI ...................................................................................................... - 2 -

1.2 MEMASUKKAN KARTU R-UIM ....................................................................................... - 2 1.3 INSTALLING THE T-FLASH CARD .................................................................................... - 2 1.4 MEMASUKKAN BATERAI ................................................................................................ - 2 1.5 MENGISI DAYA BATERAI ................................................................................................ - 3 2 2 MENGGUNAKAN JALAN PINTAS........................................................................... - 3 2.1 JALAN PINTAS DALAM LAYAR .......................................................................................... - 3 2.2 INFORMASI TOMBOL ..................................................................................................... - 4 3 MENU............................................................................................................................ - 4 3.1 MENU UTAMA ............................................................................................................... - 4 3.2 FUNGSI U-DISK ............................................................................................................ - 5 3.3 FUNGSI MODEM ........................................................................................................... - 5 3.4 PENGATURAN TELEPON ................................................................................................ - 5 4 MENGISTALL DRIVER USB........................................................................................ - 5 4.1 SYSTEM REQUIREMENT ................................................................................................ - 5 4.2 MENGGUNAKAN CD-ROM ........................................................................................... - 5 -

1

Persiapan 1.1 Melepas Baterai

Baterai ponsel ini berjenis baterai lithium. Harap gunakan baterai yang original. Untuk mengeluarkan baterai: geser cover belakang searah dengan panah yang ada di gambar 1, lalu keluarkan baterai searah dengan panah yang ada pada gambar 2.

1.2 Memasukkan kartu R-UIM Masukkan kartu R-UIM yang valid sebelum menggunakan ponsel. Untuk memasukkannya, arahkan kartu ke slot kartu yang sudah disediakan, lalu tekan kartu untuk memasukkan ke slot seperti pada gambar 3.

1.3 Memasang kartu memori T-Flash Untuk menyisipkan T-Flash Card: geser ke bawah untuk membuka slot (Gambar 4), tempat T-Flash card pada posisi yang sesuai (Gambar 5), mengenakan slot dan dorong kembali ke atas untuk tetap (Gambar 6)

1.4

Memasukkan Baterai

Tujuan tepi bawah baterai pada kekuatan antarmuka dan kemudian tekan ke bawah tepi atas baterai untuk memasang baterai, seperti yang ditunjukkan pada Gambar 7. Kemudian tempat -2-

dan tekan tombol geser penutup belakang ke bawah sampai penutup belakang di posisi, seperti yang ditunjukkan pada Gambar 8.

1.5

Mengisi daya Baterai

Harap untuk menggunakan charger original yang di dapat dari paket ponsel anda. Masukan charger di samping posel seperti pada Gambar 9.

2

Menggunakan Jalan pintas 2.1 Jalan pintas dalam layar

Dalam status standby, terdapat daftar menu yang terlihat dalam layar dari kiri ke kanan adalah: Tulis Pesan, Profil, Facebook, Y!M, Java, Bluetooth, Tekan tombol OK di tengan tombol navigasi. Tombol singkat Tulis Pesan akan aktif dan tekan tombol OK kembali untuk masuk ke menu pilihan. Tekan tombol power atau tombol hapus untuk kembali ke status tidak aktif.

-3-

2.2 Informasi Tombol

Figure 1 Gambar Keypad Hape Qwerty smartfen Q9+ Dalam status standby, tekan tombol atas navigasi untuk memulai browser WAP. Tekan tombol bawah navigasi untuk membuka Galeri. Tekan tombol kiri navigasi untuk Pemutar musik. Tekan tombol kanan navigasi untuk memulai Kamera. Tekan tombol Hapus untuk membuka menu favorit. Tetapi tombol navigasi ini dapat di atur sesuai keinginan anda. 3 Menu 3.1 Menu Utama

Dalam keadaan standby, tekan tombol pilih kiri (Tombol Menu) untuk menuju ke daftar menu utama; Dari kiri ke kanan, lalu lanjut ke bawah: Nama, SMS, Panggil , Profil, Wap, Layanan dan Aplikasi, kamera, Musik, Suara recoder, Galeri, Game, Value-Added, Opera Mini, UTK, Twitter, Y!M, Facebook, Pengaturan.

-4-

3.2 Fungsi USB-disk Pilh Menu/ Pengiriman / Pengaturan Koneksi / USB-disk lalu tekan tombol OK untuk mengaktifkan fungsi U-disk. Akan keluar informasi Mohon sambungkan USB lalu sambungkanlah kabel data ke komputer. Jika sebelumnya sudah terpasang, cabut dahulu, lalu sambungkan lagi.

3.3 Fungsi Modem

Smartfren Q9+ dapat digunakan sebagai modem ketika anda menggundakan Komputer atau Laptop untuk menggunakan internet. Pilih Menu/Pengaturan/Pengaturan koneksi/Modem lalu tekan tombol OK untuk mengaktifkan fungsi modem.3.4 Pengaturan Telepon

1) Pilih Menu/Pengaturan/Pengaturan Telepon untuk mengatur bahasa/format waktu/Format tanggal/kunci tombol otomatis. 2) Pilih Menu/Pengaturan/Pengaturan Tampilan untuk mengatur wallpaper/screensaver/tema/format manual utama/layar belakang. 3) Dalam menu pilihan anda dapat menyimpan file audio di dalam galeri dan dapat di set sebagai nada dering panggilan masuk.

4

Menginstall Driver USB 4.1 System requirement

OS: Windows 2000Windows XPWindows Vista CPU: 500MHz atau lebih. Memori: 128M atau lebih. 4.2 Menggunakan CD-ROM

Masukkan CD-ROM dalam Driver DISK untuk memulai menginstall,

-5-

-6-

CONTENTS

1

GETTING STARTED ..................................................................................................... - 2 1.1 REMOVING THE BATTERY ............................................................................................. - 2 1.2 INSTALLING THE R-UIM CARD ...................................................................................... - 2 1.3 INSTALLING THE T-FLASH CARD .................................................................................... - 2 1.4 INSTALLING THE BATTERY ............................................................................................. - 3 1.5 CHARGING THE BATTERY ............................................................................................. - 3 -

2

USING SHORTCUT FOR QUICK ACTION................................................................... - 3 2.1 SHORTCUT SOFT MENU ............................................................................................... - 3 2.2 KEY ASSIGNMENT ........................................................................................................ - 4 -

3

MENU............................................................................................................................. - 4 3.1 MAIN MENU ................................................................................................................. - 4 3.2 USB-DISK FUNCTION ................................................................................................... - 5 3.3 MODEM FUNCTION ....................................................................................................... - 5 3.4 PHONE SETTINGS ........................................................................................................ - 5 -

4

INSTALLING USB DRIVER .......................................................................................... - 6 4.1 SYSTEM REQUIREMENT ................................................................................................ - 6 4.2 USING CD-ROM ......................................................................................................... - 6 -

1

Getting started 1.1 Removing the Battery

To remove the battery: Slide the rear cover upward (see Figure 1) to remove the rear cover, raise the upper edge of the battery (see Figure 2), and then take the battery out of the phone.

1.2

Installing the R-UIM Card

Insert a valid R-UIM card before using the phone. To install the R-UIM card, aim the card at the card slot, press down the upper edge of the card, and then push the entire card into the card slot, as shown in Figure 3.

1.3

Installing the T-Flash Card

To insert T-Flash Card: slide down to open the slotFigure 4, place T-Flash card on the suitable positionFigure 5,put on the slot and push it up to fixedFigure 6

-2-

1.4

Installing the Battery

Aim the lower edge of the battery at the power interface and then press down the upper edge of the battery to install the battery, as shown in Figure 7. Then place and press the rear cover downward till the rear cover is in position, as shown in Figure 8.

1.5

Charging the Battery

Do use the original charger that comes with the phone to charge the battery. Insert the charging connector of the charger to the charging interface at the bottom of the phone (see Figure 9) and insert the other end to the power outlet.

2

Using shortcut for quick action 2.1 Shortcut Soft Menu

In standby status, there is a list of menu showed on screen and from left to right each is: New SMS, Profiles, Facebook, Y!M, Java, Bluetooth. Press OK key in the center of navigator key. New SMS shortcut key will be activated and press OK key again to go into relative menu. Press power key to make shortcut key to be inactive status.

-3-

2.2

Key assignment

Keypad of the smartfren Q9+ Qwerty phone In standby status, by default, press navigators upper key to start Wap browser. Press navigators down key to open Gallery. Press navigators left key to enter into Music player. Press navigators right key to start Camera. Press del key to open My favorites. Customer can re-assign other application function to the navigators upper, down, left, right key. . 3 Menu 3.1 Main menu

In standby status, press left soft key (Menu key) to go into main menu list; Icons listed from left to right in the first row: Phone Book, SMS, Call History, Profiles, Wap, Service and Application; Icons listed from left to right in the second row: Camera, Music, Voice Recorder, Gallery, -4-

Games, Extra; Icons listed from left to right in the third row: Opera Mini, UTK, Twitter, Y!M, Facebook, Settings. 3.2 USB-Disk function

Select Menu/Settings/Connection settings/USB-disk then press OK key to enable USB-Disk function. Please connect USB will be showed to ask users to plug USB cable for normal use. If USB cable has already been plugged before enabling the USB-Disk function, please plug out the cable then plug in again. 3.3 Modem function

Q9+ can be used as modem when using PC or laptop to surf internet. Select Menu/Settings/Connection settings/Modem then press OK key to enable Modem function. Taking Windows XP system as example, super terminal dialer can be used as the dialer interface. 3.4 Phone settings

1) SelectMenu/Settings/Phone settings to set Language/Time format/Date format/Auto key-lock function 2) SelectMenu/Settings/Display settings to set Wallpaper/Screen saver/Theme/Main Menu style/Backlight 3) In option menu, a piece of audio file stored in gallery can be selected for incoming call tone and a piece of picture for Wallpaper/Screen saver/Theme.

-5-

4 4.1

Installing USB Driver System requirement OS: Windows 2000, Windows XP, Windows Vista, Windows 7, MAC. CPU: 500MHz or higher. Memory: 128M or higher.

4.2

Using CD-ROM

Insert CD-ROM in DISK driver to start USB driver installation as following show in windows operating system.

-6-