Smart Suitcase Hardware eries - haopute.com · (AQP) on the OH-58D Kiowa warrior ... It is...
6
Smart Suitcase Hardware Series www.haopute.com email:[email protected] phone:02884625157 mobile:18982185717
Transcript of Smart Suitcase Hardware eries - haopute.com · (AQP) on the OH-58D Kiowa warrior ... It is...
Smart Suitcase Hardware Series
www.haopute.com
email:[email protected]
phone:02884625157
mobile:18982185717
ScanGenie Series The ScanGenie Series features state-of-the-art data acquisition hardware for structural health monitoring applications that supports large sensor network area monitoring. The compact and light-weight hardware comes with a simple I/O interface, and can be used in a large variety of applications such as composite damage detection, crack detection, corrosion monitoring, state sensing and much more.
ScanGenie II
ScanGenie II controls the active interrogation of both metal and composite structures through sensor activation and response for damage detection, particularly for large area monitoring. The hardware can monitor up to 320 sensors to monitor structural integrity through both through transmission and pulse echo modes. It also features temperature sensing and sensor diagnostics.
ScanGenie Mini
ScanGenie Mini is our latest model in the Smart Suitcase Series purpose-built far “active” damage detection. It features a very lightweight compact design that can support up to 32 sensors. It can also be customized to interface as an onboard active system.
ScanGenie On-board
ScanGenie II On-board hardware is the ScanGenie II configured with a single board computer to function as an on-board active sensing SHM system. It supports military standard features and connectors for reliable in flight and on-board functionality using up to 32 sensors.
ScanGenie cPCI
The ScanGenie cPCI card is an active damage detection system interfaced with the aerospace industry standard VxWorks operating system environment for on-board applications. The data acquisition card supports up to 32 sensors.
GeniePad
The GeniePad is the latest model in the ScanGenie II hardware series. The GeniePad is a 64-channel ScanGenie II integrated with a touch screen tablet forming a light-weight handheld data acquisition system.
www.haopute.com
email:[email protected]
phone:02884625157
mobile:18982185717
ScanGenie Series Features
ScanGenie II
ScanGenie Mini
ScanGenie On-board*
ScanGenie cPCI GeniePad
Pitch-Catch Mode
Pulse-echo Mode
Self-diagnosis ability
Sensor diagnosis ability
Channels Up to 320 Up to 32 Up to 32 Up to 32 Up to 64
Temperature Measurement -55 to 150 C
Adjustable Sampling Rate 6, 12, 24 48 MS/s
Waveform generation 10kHz – 1MHz
Actuation Signal amplitude (P-P) 120V 90V 90V 100V 90V
On board
Off board
Battery Powered
Weight 4 lbs. 0.43 lbs. 3.69 lbs. 0.25 lbs. ~ 3.5 lbs.
Dimensions (inch) 10.5 x 12.5 x 1.5
4 x 4.5 x 1.5 4 x 4.2 x 11.6 4 x 6.5 x 0.5 ~ 9 x 13.5 x 2
• Successfully tested by the U.S. Army for Environmental MIL-STD-810G as per Airworthiness Qualification Plan (AQP) on the OH-58D Kiowa warrior
• Uses a SwitchHub hardware to support the maximum number of 320 channels • Specification are subject to change without notice.
www.haopute.com
email:[email protected]
phone:02884625157
mobile:18982185717
ScanSentry Series
The ScanSentry series consists of our specialized hardware dedicated for hot-spot monitoring. This series was created to be able to provide solutions to challenges encountered in monitoring hard to monitor hot-spot areas with very small coverage area. With this in mind, the ScanSentry series hardware was designed for low crosstalk. This allows for extremely close sensor spacing for high-resolution fatigue crack monitoring.
ScanSentry
ScanSentry High Voltage
ScanSentry High Voltage has the same features as the ScanSentry but has a maximum actuation signal amplitude that is 60 percent more than the standard ScanSentry. It also offers twice the number of channels respectively. This increases the sensor network configuration options allows for additional applications to be applied.
ScanPad
Acellent ScanPad is an all-in-one handheld device which features the standard ScanSentry interfaced with a touch-screen tablet operating on Windows 7 Pro. The ScanPad is preconfigured to control data acquisition and data analysis with damage detection via the installed Acellent software. This is a convenient alternative especially when working with monitored structures on site.
The ScanSentry is designed to have the same SHM monitoring functions as the ScanGenie series while specializing on hot-spot monitoring. With 32 total channels (16 discrete actuators and 16 discrete receiver channels), it offers the lowest crosstalk of any of our hardware solutions. The reduced crosstalk facilitates close sensor spacing enabling high-resolution fatigue crack monitoring. The hardware features a very lightweight design and easy to learn and use I/O interface.
www.haopute.com
email:[email protected]
phone:02884625157
mobile:18982185717
ScanSentry Series Features
ScanSentry ScanSentry High Voltage
ScanPad
Pitch - Catch Mode
Pulse-echo Mode
Self-diagnosis ability
Sensor diagnosis ability
Channels Up to 32 Up to 64 Up to 32
Temperature Measurement -55 to 150 ºC
Adjustable Sampling Rate 6, 12, 24, 48 MS/s
Waveform Generation 10kHz – 700KHz
Actuation Signal amplitude (P-P) 94V 150V 94V
On board
Off board
Battery Powered
Weight 3 lbs. 5.12 lbs. 8.5 lbs.
Dimensions (inch) 7.5 x 12.4 x 1.1 10.5 x 14.7 x 1.5 9 x 13.5 x 2.3 • Specification are subject to change without notice.
canSentry Series Features canSentry Series Features
www.haopute.com
email:[email protected]
phone:02884625157
mobile:18982185717
IMGenie II
The IMGenie II is a lightweight, low profile, battery-powered device that reports impact events in real-time. With the 64 channels standard and wireless card option, IMGenie II can efficiently monitor large structure remotely. Power saving sleep mode allows IMGenie II to "wake up" upon impact to reports the impact's time, force and location.
• Supports up to 64 PZT passive sensors • 25 KS/s rate parallel input at 12 bit resolution • Input signal range +/- 10V • 16 MB flash memory for data storage • Real-time mode and data-logger mode • Low Pass filter on every channel
APA40-A Acellent’s wide-band power amplifier is a 40 Watt, wideband, power amplifier with an output voltage range of 70 Volts. The Amplifier APA40-A has a fixed gain of 20dB with <0.3% distortion over the entire frequency range while having a slew rate that is greater than 600V/s. It is significantly smaller (only 1/10 the size of KH7500) and lighter (only 1/6 the weight of KH7500) than the KH7500, making it easier to handle and to use. Amplifier APA40-A also provides much stronger power than Acellent's old amplifier model AT76. The amplifier can be used for piezoelectric applications as well as many other applications.
• Maximum Voltage: ± 70 volts peak • Maximum Current: ± 800 mA peak • Output Power: 40.0 watts peak • Frequency Range: DC to 1 MHz • Voltage Gain: Fixed x10 • Slew Rate (no load): 600 volts / µsecond • Maximum Input Voltage: ± 10 volts peak • Maximum DC Component: ± 10 volts DC • Input Coupling: Direct DC coupling
• Input Impedance: 10K ohm • Output Coupling: DC coupling • Load Impedance: Capable of driving any load within the voltage and current limitations of the amplifier • AC Power Source: User settable: 100-130 VAC, 50/60 Hz or 200-250 VAC, 50/60 Hz • Circuit Protection: Overload, short circuit • Weight: ~ 4.25 lbs. • Dimensions: 8"L x 6"W x 3.5"H
• Ethernet Interface, RS-232 Interface, USB Interface • Battery Powered • Operating Temperature Range: 0 ºC – 45 ºC • Storage Temperature Range: -15 ºC – 85 ºC • Weight: ~ 1.5 lbs. • Dimensions: 7.5"L x 4.3"W x 1.6"H
• Specifications are subject to change without notice.
www.haopute.com
email:[email protected]
phone:02884625157
mobile:18982185717
