(410334-X) SIRIM QAS International Sdn. Bhd.No.1, Persiaran Dato' Menteri, P.O.BOX 7035, Section 2, 40700 Shah Alam, Selangor Darul Ehsan, Malaysia Tel: 03-55446386 Fax: 03-55446381 www.sirim-qas.com.my

TEST REPORT

REPORT NO : 2018MA0802 PAGE : 1 OF 5

This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QASInternational Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means orforms (including but not limited to advertising purposes) without written approval from the Managing Director, SIRIM QAS InternationalSdn. Bhd. Please refer the last page for Conditions Relating to the Use of Test Report.

THIS TEST REPORT IS ISSUED IN SECURED PDF SOFTCOPY

Applicant : ITHAD ENGINEERING SDN BHDNo.37, Jalan Taming 7,Taman Taming Jaya, Balakong,43300 Seri kembangan,Selangor, Malaysia.

Manufacturer : ITHAD ENGINEERING SDN BHDNo.37, Jalan Taming 7,Taman Taming Jaya, Balakong,43300 Seri kembangan,Selangor, Malaysia.

Product : 19" DATA CENTRE SERVER RACKReference Standard / Method of Test

: IEC 60297-3-100 - Mechanical Structures for Electronics Equipment - Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series.- Part 3-100: Basic Dimensions of Panels, Subracks, Chassis, Racks and Cabinets

Description of sample / Description of Test Specimen

: Brand: PrimestarModel: 42U Server RackOverall Dimension: 600(W)X1000(D)X2000(H) - mmSample Quantity: 1 unit

Date Received of Complete Application

: 04 September 2018

Job No. : J20181390653Description of Test Results / Overall Test Result

: The test results for the submitted test samples as described in this test report complied with the requirements of the above reference standard.

Issued Date : 04 October 2018

Approved Signatories;

...................................................... (MOHD HAFIZOL BIN SHAARI)

Testing Executive

...................................................... (MOHD FAIZAR BIN MUSTAFA)

Head Mechanical & Automotive Section

Testing Services Department

REPORT NO. : 2018MA0802 PAGE: 2 OF 5

This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS International Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or forms (including but not limited to advertising purposes) without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. Please refer the last page for Conditions Relating to the Use of Test Report.

TEST RESULT

19” DATA CENTRE SERVER RACK

Test Item : Dimensions of Mechanical Structures

Test Clause : Clause 5 – Front panels 5.1 – Front panel dimensions

Test Result :

Type Requirement Actual Result

Height Units

n x U H1

±0.4 H2

±0.4 H3

±0.4 H4

±0.4 H1 H2 H3 H4

1U

(44.45) 43.65 31.75 5.95 - 43.49 31.50 6.03 - Pass

2U

(88.90) 88.10 76.20 5.95 - 88.19 76.21 6.11 - Pass

3U

(133.35) 132.55 57.15 37.70 - 132.69 57.36 37.53 - Pass

4U

(177.80) 177.00 101.60 37.70 - 177.34 101.77 38.01 - Pass

5U

(222.25) 221.45 146.05 37.70 - 221.69 145.88 37.73 - Pass

6U

(266.70) 265.90 190.50 37.70 - 266.25 190.65 37.35 - Pass

8U

(355.60) 354.80 279.40 37.70 76.20 354.71 279.45 37.91 76.13 Pass

10U

(444.50) 443.70 368.30 37.70 165.10 443.62 368.41 37.53 165.08 Pass

11U

(488.95) 488.15 412.75 37.70 146.05 488.18 412.60 37.71 146.12 Pass

Note: All dimensions in millimetres (mm)

REPORT NO. : 2018MA0802 PAGE: 3 OF 5

This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS International Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or forms (including but not limited to advertising purposes) without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. Please refer the last page for Conditions Relating to the Use of Test Report.

TEST RESULT

19” DATA CENTRE SERVER RACK

Test Item : Dimensions of Mechanical Structures

Test Clause : Clause 6 – Racks 6.1 – Racks description

Test Result : Width dimension, Wc = 500 mm

Test Item : Dimensions of Mechanical Structures

Test Clause : Clause 6 – Racks 6.2 – Rack/cabinet mounting grid type II

Test Result :

Requirement Actual Result

Wc = 500 Wc = 500 Pass

465.1±1.6 464.6 Pass

31.75±0.4 31.68 Pass

450±0.4 450.18 Pass

Note: All dimensions in millimetres (mm)

REPORT NO. : 2018MA0802 PAGE: 4 OF 5

This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS International Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or forms (including but not limited to advertising purposes) without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. Please refer the last page for Conditions Relating to the Use of Test Report.

TEST RESULT

19” DATA CENTRE SERVER RACK

Test Item : Dimensions of Mechanical Structures

Test Clause : Clause 7 – Cabinet 7.3 – Dimensions of cabinets type B

Test Result : Height, H – 2000 mm Width, Wc – 600 mm Depth, D – 1000 mm

REPORT NO. : 2018MA0802 PAGE: 5 OF 5

This Test Report refers only to samples submitted by the applicant to SIRIM QAS International Sdn. Bhd. and tested by SIRIM QAS International Sdn. Bhd. This Test Report shall not be reproduced, except in full and shall not be used for any purpose by any means or forms (including but not limited to advertising purposes) without written approval from Managing Director, SIRIM QAS International Sdn. Bhd. Please refer the last page for Conditions Relating to the Use of Test Report.

APPENDIX I

PICTURES OF THE SAMPLE

Figure 1&2 - 19” Data Centre Server Rack