1

The Brooks® Sho-RateTM Series glass tube variable area flow meter has been the industrystandard glass tube variable area meter for decades. This glass tube meter is ideal for avariety of gas and liquid applications. These meters are particularly suited for purgeapplications. The base configuration uses a borosilicate glass tube installed in analuminum frame with 316SS end blocks, adaptors, and valve. Additional materialoptions, valve options, and flow controllers are available to provide the appropriateconfiguration for a wide variety of applications.

• Standard direct read scales on tube for all fluids and fluid conditions (user selected)• Standard millimeter scales with flow curves for all fluids and fluid conditions (user

selected)• Scale length (approximate) 65mm, 150mm• Magnifier built into front shield• Flowmeter options:

Multiple fitting adapters for all world areasNo valve, cartridge valve and precision control valveInlet & outlet valvesIntegral flow controller, upstream & downstreamMultiple connection fittings to fit all applicationsMultiple approval certifications for world wide usage

Data Sheet

Sho-RateTM

Models 1350G & 1355GVariable Area

OverviewOverviewOverviewOverviewOverview

PrPrPrPrProduct Featuroduct Featuroduct Featuroduct Featuroduct Featureseseseses

DS-VA-1350G-engDecember, 2015

Sho-RateTM 1350G & 1355G Series

Low Flow Glass TubeFlowmeters

DS-VA-1350G-engDecember, 2015

2

FeaturFeaturFeaturFeaturFeatures and Benefitses and Benefitses and Benefitses and Benefitses and Benefits

Optional Optional Optional Optional Optional VVVVValves for Inlet or Outletalves for Inlet or Outletalves for Inlet or Outletalves for Inlet or Outletalves for Inlet or Outlet• Cartridge III Valves• NRSTM (Non-Rising Stem)• Integral Flow Controllers

ThrThrThrThrThreaded eaded eaded eaded eaded JacJacJacJacJack Scrk Scrk Scrk Scrk Screwewewewew• Tubes sealed on compression gasket

Metering Metering Metering Metering Metering TTTTTubesubesubesubesubes• Heavy-wall, precision bore• Borosilicate glass• Removeable without

disconnnecting instrument

InInInInInterterterterterccccchangeable hangeable hangeable hangeable hangeable TTTTTubes and Floatsubes and Floatsubes and Floatsubes and Floatsubes and Floatswith Dirwith Dirwith Dirwith Dirwith Direct Reading (DR) Scales onect Reading (DR) Scales onect Reading (DR) Scales onect Reading (DR) Scales onect Reading (DR) Scales onthe the the the the TTTTTubeubeubeubeube• Allows users to change ranges as

the application dictates• DR Scale on Tube is determined

by the user; based on specificapplication needs

• Eliminates reading errorsintroduced by detached scales;resulting in a more accurateindication of flow

Rugged, Single Piece FrRugged, Single Piece FrRugged, Single Piece FrRugged, Single Piece FrRugged, Single Piece Frame Constructioname Constructioname Constructioname Constructioname Construction

InInInInIntegrtegrtegrtegrtegral Float Stopsal Float Stopsal Float Stopsal Float Stopsal Float Stops• Prevent loss of float during tube

removal

Clear PClear PClear PClear PClear PolycarbonateolycarbonateolycarbonateolycarbonateolycarbonateFFFFFaceshieldaceshieldaceshieldaceshieldaceshield

• Built-in magnifier for easierfloat and scale reading

Self Self Self Self Self Aligning BlocAligning BlocAligning BlocAligning BlocAligning Blocksksksksks• Allows for easier tube alignment and

replacement

3

1350G1350G1350G1350G1350G 1355G1355G1355G1355G1355G

PrPrPrPrProduct Specificationsoduct Specificationsoduct Specificationsoduct Specificationsoduct Specifications

PerformancePerformancePerformancePerformancePerformanceAccuracyAccuracyAccuracyAccuracyAccuracy ±5% at reference conditions ± 3% at reference conditions

RepeatabilityRepeatabilityRepeatabilityRepeatabilityRepeatability 0.25% F.S.

Pressure/TemperaturePressure/TemperaturePressure/TemperaturePressure/TemperaturePressure/Temperature 200 psig (33°F - 250°F) / 13.8 bar (1°C-121°C)

Materials of ConstructionMaterials of ConstructionMaterials of ConstructionMaterials of ConstructionMaterials of Construction Borosilicate glass, Brass, Aluminum, 316 Stainless Steel, Clear Polycarbonate,Milk White Polycarbonate, Teflon®

End Block OptionsEnd Block OptionsEnd Block OptionsEnd Block OptionsEnd Block Options Stainless Steel and Brass

Packing MaterialPacking MaterialPacking MaterialPacking MaterialPacking Material Viton® fluoroelastomers, Teflon®, Buna, Kalrez® perfluoroelastomers

Float MaterialsFloat MaterialsFloat MaterialsFloat MaterialsFloat Materials Glass, Sapphire, Stainless Steel, Carboloy®, Tantalum

Connection MaterialsConnection MaterialsConnection MaterialsConnection MaterialsConnection Materials Stainless Steel

Connection OptionsConnection OptionsConnection OptionsConnection OptionsConnection Options 1/8” NPT (w/wo locknuts)1/4” NPT (w/wo locknuts)

1/8” Compression (w/wo locknuts)1/4” Compression (w/wo locknuts)

6 mm Compression (w/wo locknuts)1/4” RC (w/wo locknuts)3/8” RC (w/wo locknuts)

1/4” VCR®

1/4” ID HoseSwagelok® Converters

DimensionsDimensionsDimensionsDimensionsDimensions See Dimension Drawings

Alarm AvailabilityAlarm AvailabilityAlarm AvailabilityAlarm AvailabilityAlarm Availability (coming soon)

Valve OptionsValve OptionsValve OptionsValve OptionsValve Options Cartridge III Valve and NRSTM

Valve MaterialsValve MaterialsValve MaterialsValve MaterialsValve Materials Stainless Steel

Flow ControllerFlow ControllerFlow ControllerFlow ControllerFlow Controller Yes

CertificationsCertificationsCertificationsCertificationsCertifications International Calibration Certificate (ICC)CRN (coming soon)

Pressure Equipment Directive (97/23/EC)RoHS (II)

REACH (coming soon)

4

PrPrPrPrProduct Specifications - Capacities; 1350G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1350G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1350G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1350G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1350G, Rib Guided, Spherical Floats

Models 1350G/1355G Models 1350G/1355G Models 1350G/1355G Models 1350G/1355G Models 1350G/1355G TTTTTube and Float Code; Decaled Scale Option, 7th, 8th & 9th Digitsube and Float Code; Decaled Scale Option, 7th, 8th & 9th Digitsube and Float Code; Decaled Scale Option, 7th, 8th & 9th Digitsube and Float Code; Decaled Scale Option, 7th, 8th & 9th Digitsube and Float Code; Decaled Scale Option, 7th, 8th & 9th Digits

SevenSevenSevenSevenSeventh Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Configurfigurfigurfigurfigurationationationationation

CodeCodeCodeCodeCode Model 1350 Model 1350 Model 1350 Model 1350 Model 1350 TTTTTubeubeubeubeube Model 1355 Model 1355 Model 1355 Model 1355 Model 1355 TTTTTubeubeubeubeube

A R-2-15-A GB R-2-15-B GC R-2-15-C GD R-2-15-D GF R-6-15-B GG R-2-65-A G R-2-15-AAAA GH R-2-65-B GJ R-2-65-C GK R-2-65-D GL R-6-65-A GM R-6-65-B GN No Tube No Tube

Eighth and NinEighth and NinEighth and NinEighth and NinEighth and Ninth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Conth Digit in Model Code, for Scale Configurfigurfigurfigurfigurationationationationation

Decal Scale InscriptionDecal Scale InscriptionDecal Scale InscriptionDecal Scale InscriptionDecal Scale Inscription

MeterMeterMeterMeterMeter FloatFloatFloatFloatFloat MMMMMMMMMM LinearLinearLinearLinearLinear CustomCustomCustomCustomCustom PPPPPererererercencencencencentttttAccurAccurAccurAccurAccuracyacyacyacyacy MaterialMaterialMaterialMaterialMaterial ScaleScaleScaleScaleScale ScaleScaleScaleScaleScale DecalDecalDecalDecalDecal ScaleScaleScaleScaleScale

StandarStandarStandarStandarStandarddddd Glass 1A 2A 3A 4A(1350-10%) Stainless Steel 1B 2B 3B 4B(1355-5%) Sapphire 1C 2C 3C 4C

Carboloy 1D 2D 3D 4DTantalum 1E 2E 3E 4E

CalibrCalibrCalibrCalibrCalibratedatedatedatedated Glass 1G 2G 3G 4G(1350-5%) Stainless Steel 1H 2H 3H 4H(1355-2% Sapphire 1J 2J 3J 4J

Carboloy 1K 2K 3K 4KTantalum 1L 2L 3L 4L

*Note: Code for No Float/No Scale = “ZZ”

Capacities - Rib Guide Capacities - Rib Guide Capacities - Rib Guide Capacities - Rib Guide Capacities - Rib Guide TTTTTubes, Spherical Floats for use with 1350G Series Onlyubes, Spherical Floats for use with 1350G Series Onlyubes, Spherical Floats for use with 1350G Series Onlyubes, Spherical Floats for use with 1350G Series Onlyubes, Spherical Floats for use with 1350G Series OnlyMeterMeterMeterMeterMeter TTTTTubeubeubeubeube FloatFloatFloatFloatFloat WWWWWateraterateraterater AirAirAirAirAirSizeSizeSizeSizeSize No.No.No.No.No. MaterialMaterialMaterialMaterialMaterial GPHGPHGPHGPHGPH LPHLPHLPHLPHLPH SCFHSCFHSCFHSCFHSCFH NLPHNLPHNLPHNLPHNLPH

Glass 0.010 0.041 0.12 3.2Sapphire 0.021 0.079 0.19 5.0

R-2-65-A G Stainless Steel 0.049 0.18 0.37 9.8Carboloy 0.10 0.36 0.65 17Tantalum 0.10 0.40 0.71 18

Glass 0.014 0.06 0.16 4.4Sapphire 0.028 0.10 0.25 6.7

R-2-65-B G Stainless Steel 0.07 0.25 0.48 12Carboloy 0.12 0.48 0.80 21

2 Tantalum 0.14 0.53 0.87 22

Glass 0.12 0.47 0.99 26Sapphire 0.22 0.83 1.3 35

R-2-65-C G Stainless Steel 0.41 1.5 2.1 55Carboloy 0.65 2.4 3.1 81Tantalum 0.70 2.6 3.3 87

Glass 0.68 2.5 3.9 100Sapphire 0.99 3.7 5.1 130

R-2-65-D G Stainless Steel 1.6 6.3 7.9 200Carboloy 2.5 9.5 11 290Tantalum 2.7 10.0 12 310

Glass 2.4 9.2 14 370Sapphire 3.6 13 18 480

R-6-65-A G Stainless Steel 6.0 22 27 710Carboloy 8.9 33 38 1000Tantalum 9.5 36 41 1000

6 Glass 9.9 37 52 1300Sapphire 14.0 53 67 1700

R-6-65-B G Stainless Steel 22.0 85 97 2500Carboloy 32.0 120 130 3500Tantalum 34.0 130 140 3700

Air flows are at 14.7 psia and 70 Degrees F/1.01 Bar and 21.1 Degrees C

5

PrPrPrPrProduct Specifications - Capacities; 1355G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1355G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1355G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1355G, Rib Guided, Spherical Floatsoduct Specifications - Capacities; 1355G, Rib Guided, Spherical Floats

Capacities - Rib Guide Tubes, Spherical Floats for use with 1355G Series OnlyMeter Tube Float Maximum Flow Rate*Size No. Material Water (CC/Min) Air

Glass 0.59 50 SCC/MSapphire 1.1 79 SCC/M

R-2-15-AAAA Stainless Steel 2.6 150 SCC/MCarboloy 5.2 280 SCC/MTantalum 5.8 310 SCC/M

Glass 5.5 370 SCC/MSapphire 10 520 SCC/M

R-2-15-D Stainless Steel 20 830 SCC/MCarboloy 34 1200 SCC/MTantalum 36 1300 SCC/M

Glass 17 0.82 SLPMSapphire 26 1.0 SLPM

2 R-2-15-A Stainless Steel 46 1.6 SLPMCarboloy 70 2.4 SLPMTantalum 75 2.5 SLPM

Glass 53 2.3 SLPMSapphire 80 3.0 SLPM

R-2-15-B Stainless Steel 130 4.6 SLPMCarboloy 200 6.7 SLPMTantalum 210 7.1 SLPM

Glass 90 4.0 SLPMSapphire 130 5.2 SLPM

R-2-15-C Stainless Steel 220 7.9 SLPMCarboloy 340 11 SLPMTantalum 360 11 SLPM

Glass 210 9.5 SLPMSapphire 320 12 SLPM

R-6-15-A Stainless Steel 540 18 SLPMCarboloy 790 25 SLPMTantalum 840 26 SLPM

6 Glass 560 23 SLPMSapphire 820 29 SLPM

R-6-15-B Stainless Steel 1300 43 SLPMCarboloy 1900 60 SLPMTantalum 2000 63 SLPM

Air flows are at 14.7 psia and 70 Degrees F/1.01 Bar and 21.1 Degrees C

6

PrPrPrPrProduct Dimensions - Model 1350G and 1355Goduct Dimensions - Model 1350G and 1355Goduct Dimensions - Model 1350G and 1355Goduct Dimensions - Model 1350G and 1355Goduct Dimensions - Model 1350G and 1355G

Model 1350G

Model 1355G

7

PrPrPrPrProduct Dimensions - Model 1350G/1355G with Flow Conoduct Dimensions - Model 1350G/1355G with Flow Conoduct Dimensions - Model 1350G/1355G with Flow Conoduct Dimensions - Model 1350G/1355G with Flow Conoduct Dimensions - Model 1350G/1355G with Flow Contrtrtrtrtrollerollerollerolleroller

Model 1350G/1355G withModel 8800 Flow Controller on Inlet

Model 1350G/1355G withModel 8900 Flow Controller on Outlet

8

1. Model2. Size, connections, type3. Quantity required4. Fluid5. Minimum, normal and maximum operating temperature6. Minimum, normal and maximum operating pressure (inlet and outlet)7. Minimum, normal and maximum flow rate8. Materials of construction

a. End fittingsb. Side platesc. Bezeld. Elastomers

9. Fluid10. Fluid specific gravity11. Fluid viscosity12. Unusual system conditions (For ranges and pressure drops other than those listed, consult factory).13. Optional equipment

a. Valve type and locationb. Flow controller and type

OrOrOrOrOrdering Indering Indering Indering Indering Information - Referformation - Referformation - Referformation - Referformation - Reference Model Code ence Model Code ence Model Code ence Model Code ence Model Code TTTTTablesablesablesablesables

9

Model CodeModel CodeModel CodeModel CodeModel Code

Code DescriptionCode DescriptionCode DescriptionCode DescriptionCode Description Code OptionCode OptionCode OptionCode OptionCode Option Option DescriptionOption DescriptionOption DescriptionOption DescriptionOption DescriptionI.I.I.I.I. Basic Model Number 13501350135013501350 65mm Sho-Rate Size 1-6 Flow Indicator

13551355135513551355 150mm Sho-Rate Size 1-6 Flow Indicator

II.II.II.II.II. Model Revision Level GGGGG Revision G

III.III.III.III.III. End Block Material AAAAA 316 stainless steelBBBBB Brass

IV.IV.IV.IV.IV. Tube 1350 1355AAAAA - R-2-15-A GBBBBB - R-2-15-B GCCCCC - R-2-15-C GDDDDD - R-2-15-D GEEEEE - R-6-15-A GFFFFF - R-6-15-B GGGGGG R-2-65-A G R-2-15-AAAA GHHHHH R-2-65-B GJJJJJ R-2-65-C GKKKKK R-2-65-D GLLLLL R-6-65-A GMMMMM R-6-65-B GN*N*N*N*N* No Tube

*Notes: The options indicated are not available with a CRN certification.

V.V.V.V.V. Float & Direct Read Scale Float Accuracy Scale InscriptionSelection ZZ**ZZ**ZZ**ZZ**ZZ** None N/A N/A

1A1A1A1A1A *GLASS STD-50(10%), 55(5%) MM1B1B1B1B1B *ST.STL STD-50(10%), 55(5%) MM1C1C1C1C1C *SAPPHIRE STD-50(10%), 55(5%) MM1D1D1D1D1D *CARBOLOY STD-50(10%), 55(5%) MM1E1E1E1E1E *TANTALUM STD-50(10%), 55(5%) MM1G1G1G1G1G GLASS CALIB-50(5%), 55(3%) MM1H1H1H1H1H ST.STL CALIB-50(5%), 55(3%) MM1J1J1J1J1J SAPPHIRE CALIB-50(5%), 55(3%) MM1K1K1K1K1K CARBOLOY CALIB-50(5%), 55(3%) MM1L1L1L1L1L TANTALUM CALIB-50(5%), 55(3%) MM2A2A2A2A2A *GLASS STD-50(10%), 55(5%) LINEAR2B2B2B2B2B *ST.STL STD-50(10%), 55(5%) LINEAR2C2C2C2C2C *SAPPHIRE STD-50(10%), 55(5%) LINEAR2D2D2D2D2D *CARBOLOY STD-50(10%), 55(5%) LINEAR2E2E2E2E2E *TANTALUM STD-50(10%), 55(5%) LINEAR2G2G2G2G2G GLASS CALIB-50(5%), 55(3%) LINEAR2H2H2H2H2H ST.STL CALIB-50(5%), 55(3%) LINEAR2J2J2J2J2J SAPPHIRE CALIB-50(5%), 55(3%) LINEAR2K2K2K2K2K CARBOLOY CALIB-50(5%), 55(3%) LINEAR2L2L2L2L2L TANTALUM CALIB-50(5%), 55(3%) LINEAR3A3A3A3A3A *GLASS STD-50(10%), 55(5%) CUSTOM DECAL3B3B3B3B3B *ST.STL STD-50(10%), 55(5%) CUSTOM DECAL3C3C3C3C3C *SAPPHIRE STD-50(10%), 55(5%) CUSTOM DECAL3D3D3D3D3D *CARBOLOY STD-50(10%), 55(5%) CUSTOM DECAL3E3E3E3E3E *TANTALUM STD-50(10%), 55(5%) CUSTOM DECAL3G3G3G3G3G GLASS CALIB-50(5%), 55(3%) CUSTOM DECAL3H3H3H3H3H ST.STL CALIB-50(5%), 55(3%) CUSTOM DECAL3J3J3J3J3J SAPPHIRE CALIB-50(5%), 55(3%) CUSTOM DECAL3K3K3K3K3K CARBOLOY CALIB-50(5%), 55(3%) CUSTOM DECAL3L3L3L3L3L TANTALUM CALIB-50(5%), 55(3%) CUSTOM DECAL4A4A4A4A4A *GLASS STD-50(10%), 55(5%) PERCENT SCALE4B4B4B4B4B *ST.STL STD-50(10%), 55(5%) PERCENT SCALE4C4C4C4C4C *SAPPHIRE STD-50(10%), 55(5%) PERCENT SCALE4D4D4D4D4D *CARBOLOY STD-50(10%), 55(5%) PERCENT SCALE4E4E4E4E4E *TANTALUM STD-50(10%), 55(5%) PERCENT SCALE4G4G4G4G4G GLASS CALIB-50(5%), 55(3%) PERCENT SCALE4H4H4H4H4H ST.STL CALIB-50(5%), 55(3%) PERCENT SCALE4J4J4J4J4J SAPPHIRE CALIB-50(5%), 55(3%) PERCENT SCALE4K4K4K4K4K CARBOLOY CALIB-50(5%), 55(3%) PERCENT SCALE4L4L4L4L4L TANTALUM CALIB-50(5%), 55(3%) PERCENT SCALE

*Accuracy for air and water in the preceding capacity tables will be STD-50(5%), 55(3%).** Use this code (ZZ) only when Tube Code above is “N”

10

Model Code (ConModel Code (ConModel Code (ConModel Code (ConModel Code (Continued)tinued)tinued)tinued)tinued)

Code DescriptionCode DescriptionCode DescriptionCode DescriptionCode Description Code OptionCode OptionCode OptionCode OptionCode Option Option DescriptionOption DescriptionOption DescriptionOption DescriptionOption DescriptionVI.VI.VI.VI.VI. Tube Packing and Tube Packing O-ring Meter/Valve

O-ring Materials AAAAA Buna BunaBBBBB Viton VitonCCCCC Viton Teflon(mtr), Kalrez(vlv, jack screw)DDDDD Viton EPREEEEE Viton KalrezFFFFF Teflon BunaGGGGG Teflon VitonHHHHH Teflon Teflon(mtr), Kalrez(vlv, jack screw)JJJJJ Teflon EPRKKKKK Teflon KalrezLLLLL EPR EPRMMMMM Butyl ButylNNNNN No Packing BunaPPPPP No Packing VitonQQQQQ No Packing Teflon(mtr), Kalrez(vlv, jack screw)RRRRR No Packing EPRSSSSS No Packing KalrezTTTTT No Packing Butyl

Note: If valve assy is not required for a specific model number, select the proper code for the O-ring material of the Sho-Rate.

VII.VII.VII.VII.VII. End Fitting Composition Fitting Material Connection Size and TypeCCCCC 316SS 1/8" NPT*F*F*F*F*F 316SS 1/8" Thd.W/LocknutJJJJJ 316SS 1/4" NPT

* / ***K* / ***K* / ***K* / ***K* / ***K KYNAR 1/4" NPT*N*N*N*N*N 316SS 1/4" Thd.W/LocknutRRRRR 316SS 1/8" Compression*U*U*U*U*U 316SS 1/8" Compression w/locknut (2 pc design)WWWWW 316SS 1/4" F-Rc Thd w/LocknutXXXXX 316SS 1/4" Compression*1*1*1*1*1 316SS 1/4" Compression w/locknut (2 pc design)33333 316SS 3/8" F-Rc Thd w/Locknut

***4***4***4***4***4 316SS 1/4" I.D.Hose*6*6*6*6*6 316SS Integral 5/16-24 thd.*7*7*7*7*7 316SS 1/4" VCR

***8***8***8***8***8 316SS 6mm thd*Not valid for controllers***The options indicated are not available with a CRN certification.

VIII.VIII.VIII.VIII.VIII. Valve Type AAAAA Valve PlugBBBBB NRS-316SS #1CCCCC NRS-316SS #2DDDDD NRS-316SS #3EEEEE NRS-316SS #4FFFFF NRS-316SS #5GGGGG NRS-316SS #6HHHHH NRS-316SS #7JJJJJ To Integrally Mounted 88/8900 316SS Flow Controller - Cartridge II/III Valve - Viton DiaphragmKKKKK To Integrally Mounted 88/8940 316SS Flow Controller - Cartridge II/III Valve - Viton DiaphragmLLLLL To Integrally Mounted 88/8900 Brass Flow Controller - Cartridge II/III Valve - Viton DiaphragmMMMMM To Integrally Mounted 88/8940 Brass Flow Controller - Cartridge II/III Valve - Viton DiaphragmNNNNN To Integrally Mounted 88/8900 316SS Flow Controller - Cartridge II/III Valve - Teflon DiaphragmPPPPP To Integrally Mounted 88/8940 316SS Flow Controller - Cartridge II/III Valve - Teflon DiaphragmQQQQQ To Integrally Mounted 88/8900 Brass Flow Controller - Cartridge II/III Valve - Buna DiaphragmRRRRR To Integrally Mounted 88/8940 Brass Flow Controller - Cartridge II/III Valve - Buna Diaphragm11111 To Integrally Mounted 88/8900 316SS Flow Controller - NRS - Viton Diaphragm22222 To Integrally Mounted 88/8940 316SS Flow Controller - NRS - Viton Diaphragm33333 To Integrally Mounted 88/8900 Brass Flow Controller - NRS - Viton Diaphragm44444 To Integrally Mounted 88/8940 Brass Flow Controller - NRS - Viton Diaphragm55555 To Integrally Mounted 88/8900 316SS Flow Controller - NRS - Teflon Diaphragm66666 To Integrally Mounted 88/8940 316SS Flow Controller - NRS - Teflon Diaphragm77777 To Integrally Mounted 88/8900 Brass Flow Controller - NRS - Buna Diaphragm88888 To Integrally Mounted 88/8940 Brass Flow Controller - NRS - Buna DiaphragmSSSSS Std. Valve Cavity - no valve assy or plugTTTTT Cartridge II/III Valve - Low Flow - 316SSUUUUU Cartridge II/III Valve - Med Flow - 316SSVVVVV Cartridge II/III Valve - HighFlow - 316SS

11

Model Code (ConModel Code (ConModel Code (ConModel Code (ConModel Code (Continued)tinued)tinued)tinued)tinued)

Sample Standard Model CodeSample Standard Model CodeSample Standard Model CodeSample Standard Model CodeSample Standard Model Code

IIIII IIIIIIIIII IIIIIIIIIIIIIII IVIVIVIVIV VVVVV VIVIVIVIVI VIIVIIVIIVIIVII VIIVIIVIIVIIVII IXIXIXIXIX XXXXX XIXIXIXIXI

13501350135013501350 GGGGG GGGGG 1B1B1B1B1B FFFFF CCCCC LLLLL 22222 AAAAA AAAAA AAAAA

Code DescriptionCode DescriptionCode DescriptionCode DescriptionCode Description Code OptionCode OptionCode OptionCode OptionCode Option Option DescriptionOption DescriptionOption DescriptionOption DescriptionOption DescriptionIX.IX.IX.IX.IX. Valve Cavity/Controller Location Valve/Controller Connection Orientation

& Connection Orientation Location Inlet Outlet11111 Inlet Back Back55555 Outlet Back Back99999 n/a Back Back

X.X.X.X.X. Accessories AAAAA NoneB*B*B*B*B* Bistable Alarm 1 InitiatorC*C*C*C*C* Bistable Alarm 2 InitiatorsD*D*D*D*D* Bistable Alarm 1 Initiator with I.S. Relays 240VE*E*E*E*E* Bistable Alarm 2 Initiators with I.S. Double Relays 240VF*F*F*F*F* Bistable Alarm 1 Initiator with I.S. Relay 120VG*G*G*G*G* Bistable Alarm 2 Initiators with I.S. Double Relays 120VHHHHH Aluminum Flush Bezel for Stainless MetersKKKKK Panel Mount Screws

*Notes: Not yet available. Release TBD

XI.XI.XI.XI.XI. Options AAAAA NoneBBBBB 316 Stainless Steel FrameCCCCC Baseplate (Aluminum)DDDDD No Brooks IdentificationEEEEE 316SS Frame & No Brooks IDFFFFF Baseplate & No Brooks IDGGGGG 316SS Frame & BaseplateHHHHH 316SS Frame & Baseplate & No Brooks IDJJJJJ Stainless Steel Tag & 316SS FrameKKKKK Stainless Steel Tag & Baseplate (Aluminum)LLLLL Stainless Steel Tag & no Brooks IDMMMMM Stainless Steel Tag & 316SS Frame & No Brooks IDNNNNN Stainless Steel Tag & Baseplate & No Brooks IDPPPPP Stainless Steel Tag & 316SS Frame & BaseplateQQQQQ Stainless Steel Tag & 316SS Frame & Baseplate & No Brooks IDRRRRR Stainless Steel TagS*S*S*S*S* Stainless Steel Float StopsTTTTT 316SS Frame & Stainless Steel Float StopsUUUUU 316SS Frame & Stainless Steel Float Stops & Stainless Steel Tag

*Notes: Not yet available. Release TBD

XII.XII.XII.XII.XII. Certifications AAAAA NoneBBBBB CRN CertificationCCCCC International Calibration Certification (10%-1350, 5%-1355)DDDDD Degrease for Oxygen Service (not MIL Spec)EEEEE CRN Cert & ICCFFFFF CRN Cert & Degrease for O2GGGGG Degrease for O2 & ICC

Brooks is committed to assuring all of our customers receive the ideal flow solution for their application, along with outstandingservice and support to back it up. We operate first class repair facilities located around the world to provide rapid response andsupport. Each location utilizes primary standard calibration equipment to ensure accuracy and reliability for repairs andrecalibration and is certified by our local Weights and Measures Authorities and traceable to the relevant International Standards.

Visit www.BrooksInstrument.com to locate the service location nearest to you.

STSTSTSTSTARARARARARTTTTT-UP SERVICE -UP SERVICE -UP SERVICE -UP SERVICE -UP SERVICE AND IN-SITU CALIBRAAND IN-SITU CALIBRAAND IN-SITU CALIBRAAND IN-SITU CALIBRAAND IN-SITU CALIBRATIONTIONTIONTIONTION

Brooks Instrument can provide start-up service prior to operation when required. For some process applications, where ISO-9001Quality Certification is important, it is mandatory to verify and/or (re)calibrate the products periodically. In many cases this servicecan be provided under in-situ conditions, and the results will be traceable to the relevant international quality standards.

CUSTCUSTCUSTCUSTCUSTOMER SEMINARS OMER SEMINARS OMER SEMINARS OMER SEMINARS OMER SEMINARS AND AND AND AND AND TRAININGTRAININGTRAININGTRAININGTRAINING

Brooks Instrument can provide customer seminars and dedicated training to engineers, end users, and maintenance persons.

Please contact your nearest sales representative for more details.

HELP DESKHELP DESKHELP DESKHELP DESKHELP DESKIn case you need technical assistance:

USA

+6297 9741

Due to Brooks Instrument's commitment to continuous improvement of our products, all specifications are subject to change without notice.

BrBrBrBrBrooks Service and Supportooks Service and Supportooks Service and Supportooks Service and Supportooks Service and Support

Votre contact Brooks Instrument : Serv’Instrumentation

Z.I Broteau Nord 69540 Irigny

France Tél : +33 (0)4 78 51 47 50 Fax : +33 (0)4 78 51 59 96

Email : e-serv@servinstrumentation.fr Web : www.servinstrumentation.fr

TRADEMARKSBrooks, NRS, Sho-Rate ..................................... Brooks Instrument, LLCAll other trademarks are the property of their respective owners.