SCBA Storage on Rosenbauer Pumpers

View Spartan Chassis Sled Test video on Hendersonfireonline.com

Locations

Captain, FF/Paramedic, & FF all located their respective seats Engineer’s SCBA is in Comp 4

Engineer’s SCBA Deployment

• Open Compartment 4

• Press down on Yellow tabs on both sides on drawer.

• Slide out drawer until it locks

• Grab handles and pull down

Engineer SCBA Deployment

• Remove Retention Strap

• Lift SCBA over head and place on your back

• Fold SCBA Bracket back up.

• Slide Drawer back into Comp 4

Stowing SCBA in Rosenbauer Engine

• Make sure all straps are folded up and contained inside storage box.

• Press bottle firmly into bracket

• Place retention strap around SCBA

• Fold bracket plate back up.

• Slide drawer back into compartment.

SMARTDOCK SCBA BRACKETIMMI GEN 2

Benefits

• Complies with NFPA 1901 to provide 9G retention

• Deploys and stows easily• Adjusts easily in the field• No straps or levers for firefighters to

deploy

Smartdock PartsClaw Assembly

Valve Retention Tab

Height Adjustment

CAUTION!!

Never cinch SCBA straps up while vehicle is in motion. If shoulder straps are tight, SmartDock will not retain bottle in the event of an accident.

Deployment

Always wear seat belt when vehicle is in motion

Place SCBA straps on shoulders After arriving on scene cinch up

straps on shoulders Lean forward Stand up SCBA bottle will automatically be

released from SmartDock

Daily Check and Stowing

View SmartDock SCBA Storage video on Hendersonfireonline.com

Troubleshooting• Make certain claw

assembly works smoothly everyday during checkout

• Make sure bottle is seated on valve retention tab correctly

• Make sure height adjustment is correct (claw assembly should barely touch top of bottle – no more than 1/8” space.)

• Bottle heights may vary slightly. Check every time bottle is put in bracket.