Sample Test Case for Diff RAB and SRB

10776 Test Tag Test Cases

GSM-BTR-1-4806 CDR-UMTS-010










13340 Requirement Tag

PS 64/64 to CS 12.2+PS 64/64 to PS 64/64

PS 64/128 to CS 12.2+PS 64/128 to PS 64/128

PS 64/128 to CS 12.2+PS 64/128 to CS 12.2

PS 64/384 to CS 12.2+PS 64/384 to PS 64/384

PS 64/384 to CS 12.2+PS 64/384 to CS 12.2

CS 12.2 to CS 12.2+PS 64/64 to CS 12.2

CS 12.2 to CS 12.2+PS 64/64 to PS 64/64

CS 12.2 to CS 12.2+PS 64/128 to CS 12.2

CS 12.2 to CS 12.2+PS 64/128 to PS 64/128

CS 12.2 to CS 12.2+PS 64/128 to CS 12.2 when TU Subscribed to PS 64/384








CS 12.2 to CS 12.2+PS 64/128 to PS 64/128 when TU Subscribed to PS 64/384

CS 12.2 to CS 12.2+PS 64/384 to CS 12.2

CS 12.2 to CS 12.2+PS 64/384 to PS 64/384

Interactive or background / UL:128 DL:64 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH

Interactive or background / UL:384 DL:64 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH

Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB+ Interactive or background / UL:128 DL:64 kbps / PS RAB+ UL:3.4 DL: 3.4 kbps SRBs for DCCH

Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB+ Interactive or background / UL:64 DL:64 kbps / PS RAB+ Interactive or background / UL:64 DL:64 kbps / PS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH





Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB+ Interactive or background / UL:64 DL:128 kbps / PS RAB+ Interactive or background / UL:64 DL:128 kbps / PS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH

Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL: 16 DL:128 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH









Conversational/speech / UL:5.9 DL:5.9 kbps / CS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH

Streaming / unkNown / UL:8 DL:32 kbps / PS RAB+ Interactive or background / UL:8 DL:8 kbps / PS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH

Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB +Streamingl / unkNown / UL:32 DL:32 kbps / PS RAB + Interactive or background / UL:8 DL:8 kbps / PS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH

Interactive / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH

GSM-BTR-1-4860

GSM-BTR-1-4862

GSM-BTR-1-4866

GSM-BTR-1-4868

GSM-BTR-1-4870

CDR-UMTS-010CDR-HSD-010CDR-HSD-020CDR-HSD-030

Interactive or background / UL:128 DL:[Bit rate depending on the UE category] / PS RAB + Interactive or background / UL:128 DL:[Bit rate depending on the UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH


Interactive or background/ UL:384 DL:[Bit rate depending on the UE category] / PS RAB + Interactive or background / UL:384 DL:[Bit rate depending on the UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH


Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:64 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH


Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH


Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive or background / UL:384 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH

GSM-BTR-1-4872




GSM-BTR-1-4878

GSM-BTR-1-4880

GSM-BTR-1-4882


Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:128 DL: [ Guaranteed bit rate 128 max bit rate depending on UE category] kbps / PS RAB + Interactive or background / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL

Interactive / UL:16 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH

Conversational / speech / UL:5.9 DL:5.9 kbps / CS RAB+ Interactive or background / UL:0 DL:0 kbps / PS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH

Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB+ Interactive or background / UL:0 DL:0 kbps / PS RAB+ UL:3.4 DL:3.4 kbps SRBs for DCCH

CDR-UMTS-010CDR-HSD-240

AMR Speech 12.2kbps + PS Interactive EUL/HS

CDR-UMTS-010CDR-HSD-240CDR-HSD-312

AMR Speech 5.9kbps (SF128) + PS Interactive EUL/HS

CDR-UMTS-010CDR-ENA-060

Conversational/Speech UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB

GSM-BTR-1-4886

GSM-BTR-1-4888

GSM-BTR-1-4892

GSM-BTR-1-4896

GSM-BTR-1-4898

CDR-UMTS-010CDR-HSD-010CDR-HSD-020CDR-HSD-030CDR-ENA-060

Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL: [ max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + UL


Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:128 DL: [ max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:128 DL: [max bit rate depending on UE category] / PS RAB + UL


Streaming / unknown / UL:16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB + Interactive / UL:64 DL: [max bit rate depending on UE category] / PS RAB


Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB


Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Streaming / unknown / UL:R99 streaming 128 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB

GSM-BTR-1-4902

GSM-BTR-1-4904

GSM-BTR-1-4906

GSM-BTR-1-4908

GSM-BTR-1-4952


Conversational / speech / UL:64 DL:64 kbps / PS RAB + Interactive / UL:EUL [max bit rate depending on UE category] DL: [max bit rate depending on UE category] / PS RAB


Streaming / unknown / UL:16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH


Streaming / UL:R99 streaming 16 DL: [guaranteed 128, max bit rate depending on UE category] kbps / PS RAB + Interactive / UL:8 DL: [max bit rate depending on UE category] / PS RAB + UL:3.4 DL:3.4 kbps SRBs for DCCH

3GPP specifications

From Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL: [ HSDPA max bit rate depending on UE category] kbps / PS RAB to Conversational / speech / UL:12.2 DL:12.2 kbps / CS RAB + Interactive / UL:64 DL:64 PS RAB

3GPP Specifications

PS RAB change: (UL:384 / DL: 384 PS) to (UL:[max bit rate depending on UE category] / DL: [max bit rate depending on UE category] PS) to (UL:384 / DL: 384 PS)

GSM-BTR-1-4680

GSM-BTR-1-4682

CDR-UMTS-310, REL-7 TS24.008 CR 1053.

Two RABs in dormant state, UE initiated data on the first RAB

3GPP Specifications

Band II, NW initiates PDP Context Deactivation when UE has multiple-calls (CS + PS Call) active and is also connected with PC via ActiveSync or PC Suite or Desktop Manager or iTune through a USB cable.

GSM-BTR-1-4684

GSM-BTR-1-4686

GSM-BTR-1-4688 DELETE

3GPP Specifications

Band V, NW initiates PDP Context Deactivation when UE has multiple-calls (CS + PS Call) active and is also connected with PC via ActiveSync or PC Suite or Desktop Manager or iTune through a USB cable.

3GPP Specifications

NW pages the device for an I/B PS call when UE is in PMM-Idle mode

Two RABs in dormant state, UE initiated data on the second RAB

GSM-BTR-1-4690 DELETE

GSM-BTR-1-4692

Two RABs and a CS call, the two RABs are in dormant state, UE initiated data on the first RAB

CDR-UMTS-310, REL-7 TS24.008 CR 1053.

Two RABs and a CS call, the two RABs are in dormant state, UE initiated data on the second RAB

Network Configuration

UMTS/HSDPA 850 cell, static c









UMTS/HSDPA 850 cell, static channel, good signal quality





UMTS/HSPA 850 cell, static ch

UMTS/HSPA 850 cell, static ch



UMTS/HSDPA 1900 cell, static


UMTS/HSDPA 1900 cell, static



UMTS/HSDPA band V cell, stati

UMTS/HSDPA Band II cell, stat

UMTS/HSPA 1900 cells, static

UMTS/HSUPA/HSDPA 850 cell an

UMTS/HSDPA 850 cell and 1900

UMTS/HSDPA 1900 cell static

UMTS/HSDPA 850 cell static c

UMTS/HSDPA 850 cell static c


Test Steps and Pass / Fail Criteria

Verify that while the TU is supporting a PS Interactive/Background 64/64 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/64 RAB, and following release of the Interactive/Background 64/64 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only.

Verify that while the TU is supporting a PS Interactive/Background 64/128 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/128 RAB only.

Verify that while the TU is supporting a PS Interactive/Background 64/128 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following release of the PS Interactive/Background 64/128 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only.

Verify that while the TU is supporting a PS Interactive/Background 64/384 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/384 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/384 RAB only.

Verify that while the TU is supporting a PS Interactive/Background 64/384 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/384 RAB, and following release of the PS Interactive/Background 64/384 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only.

Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/64 RAB, and following release of the PS Interactive/Background 64/64 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only.

Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/64 RAB, and following release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/64 RAB only.



Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following the release of the PS Interactive/Background 64/128 RAB, reconfigure to support a CS Conversational/Speech 12.2 RAB only. The 64/128 RAB should be supported by the TU even though the TU is subscribed to PS 64/384 service.

Verify that while the TU is supporting a CS Conversational/Speech 12.2 RAB, it can correctly reconfigure to support a simultaneous CS Conversational/Speech 12.2 RAB and PS Interactive/Background 64/128 RAB, and following the release of the CS 12.2 call, reconfigure to support a PS Interactive/Background 64/128 RAB only. The 64/128 RAB should be supported by the TU even though the TU is subscribed to PS 64/384 service.



1. power up the DUT in the 3G cell2. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case4. perform alternate FTP download and upload

* The DUT shall support the RAB/SRB



1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate a PDP Context 4. network assign the RAB combination specified in this test case5. perform alternate FTP download and upload 6. check voice quality

* The DUT shall support the RAB/SRB combination* DUT shall have good audio quality for the voice call

1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT)4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)5. network assign the RAB combination specified in this test case6. verify the data session throughput7. check voice quality


1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT)4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)5. network assign the RAB combination specified in this test case6. verify the data session working fine.7. check voice quality





* The DUT shall support the RAB/SRB combination

* DUT shall have good audio quality for the voice call







1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate 1st PDP Context (such as a browser on the DUT)4. network assign the RAB combination specified in this test case5. verify the data session working fine.6. check voice quality



1. power up the DUT in the 3G cell2. activate 1st PDP Context (such as a browser on the DUT)3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)4. network assign the RAB combination specified in this test case5. verify the data session working fine.







1. power up the DUT in the 3G cell2. activate 1st PDP Context (such as a browser on the DUT)3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)4. network assign the RAB combination specified in this test case5. verify the data session throughput


1. power up the DUT in the 3G cell2. activate 1st PDP Context (such as a browser on the DUT)3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)4. network assign the RAB combination specified in this test case5. verify the data session working fine.











1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate 1st PDP Context 4. activate 2nd PDP Context4. network assign the RAB combination specified in this test case5. perform alternate FTP download and upload 6. check voice quality




1. power up the DUT in the 3G cell2. MO or MT a CS voice call (AMR5.9, SF128)3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case4. DUT is able to support the required CS RAB + PS RAB simultaneously.


1. power up the DUT in the 3G cell2. MO or MT a CS voice call (AMR12.2, SF128)3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case4. DUT is able to support the required CS RAB + PS RAB simultaneously.


1. power up the DUT in the 3G cell2. MO or MT a CS voice call (AMR12.2, SF128)3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case4. perform alternate FTP download and upload


1. power up the DUT in the 3G cell2. MO or MT a CS voice call (AMR5.9, SF128)3. activate a PDP Context 3. network assign the RAB/SRB combination specified in this test case4. perform alternate FTP download and upload


1. power up the DUT in the 3G cell2. MO or MT a CS voice call (AMR12.2, SF128)3. activate three PDP Contexts consequtively3. network assign the RAB/SRB combination specified in this test case4. perform alternate FTP download and upload


1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate 1st PDP Context 4. activate 2nd PDP Context4. network assign the RAB combination specified in this test case5. perform alternate FTP download and upload6. check voice quality



1. power up the DUT in the 3G cell2. establish a CS voice call 3. activate 1st PDP Context 4. activate 2nd PDP Context4. network assign the RAB combination specified in this test case5. perform alternate FTP download and upload 6. check voice quality



1. power up the DUT in the 3G cell2. activate 1st PDP Context (such as a browser on the DUT)3. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)4. activate 3rd PDP Context with a different QoS (streaming)5. network assign the RAB combination specified in this test case6. verify the data session working fine.


1. power up the DUT in the 3G cell2. MO or MT a CS call3. activate 1st PDP Context (such as a browser on the DUT)4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)5. network assign the RAB combination specified in this test case6. verify the data session working fine.


1. power up the DUT in the 3G cell2. MO or MT a CS call3. activate 1st PDP Context (such as a browser on the DUT)4. activate 2nd PDP Context with a different QoS (as a tethered dialup modem)5. network assign the RAB combination specified in this test case6. verify the data session working fine.


1. power up the DUT in the 3G cell2. Activate PDP Context with QoS conversational, UL64+DL64 3. activate 2nd primary PDP Context 4. network assign the RAB combination specified in this test case5. verify the data session working fine.


1. power up the DUT in the 3G Band V cell2. activate 1st PDP Context 3. activate 2nd PDP Context with a different QoS 4. network assign the RAB combination specified in this test case5. verify the data session working fine.


1. power up the DUT in the 3G band II cell2. activate 1st PDP Context 3. activate 2nd PDP Context with a different QoS 4. network assign the RAB combination specified in this test case5. verify the data session working fine.


Verify Device could switch from CS + UL64k/DL HSDPA RAB to CS + UL64k/DL64k RAB after it receives Radio Bearer Reconfiguration with "dl-parameters : sameAsUL”.

Verify Test UE can correctly upgrade its PS RAB from DCH/DCH to E-DCH/HS-DSCH, then downgrade from E-DCH/HS-DSCH to DCH/DCH in band II and V

0. Use AT Command CGDCONT to create two separate APNs, for instance PTA and Phone1. Use the device as a modem to establish the first primary PDP Context with a dial up connection;2. Access an internal web server or Ping via the established connection to verify the data connecton works fine;3. Make the above data connection go into dormant state (e.g. release RB);4. Establish the second Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device;5. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing or Ping from the first data connection again.6. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=1 and nsapi6=0 in the IE UplinkDataStatus. Otherwise, test case shall fail.7. Deactivate both PDP contexts.

(a) Activate a 3G 1900 cell with good RF condition

(b) Power on TU to register to the Network

(c) Prompt TU to have its ActiveSync Client Activated and then initiate a PS session (browse a internal web page from the device)

(d) After TU successfully initiate a PS data session, prompt it to initiate a voice call.

(e) Dial a voice call through the TU.

(f) After the voice call is connected, wait 3 seconds, then send a PDP Context Deactivation Request from NW Simulator to the TU.

(g) Wait 40 seconds to 10 minutes, check whether the voice call channel still exists or not by listening to the handset. If the voice call is dropped or voice channel does not exist, then the test case fails, otherwise, the test case passes.



(c) Prompt TU to have its ActiveSync Client Activated and then initiate a PS session (browse a internal web page from the device)

(d) After TU successfully initiate a PS data session, prompt it to initiate a voice call.

(e) Dial a voice call through the TU.

(f) After the voice call is connected, wait 3 seconds, then send a PDP Context Deactivation Request from NW Simulator to the TU.

(g) Wait 40 seconds to 10 minutes, check whether the voice call channel still exists or not by listening to the handset. If the voice call is dropped or voice channel does not exist, then the test case fails, otherwise, the test case passes.



(c) Prompt TU to initiate a PS session (browse an internal web page from the device)

(d) After TU successfully initiate the PS data session, then initiates a MT voice call;

(e) Wait 15 seconds, NW simulator sends a PS Signaling Connection Release to TU but keep voice call still alive. TU will be in PMM-Idle mode.

(f) NW simulator sends a Page type II message (with P-TMSI) to the TU for a Terminating Interactive/Background (PS) call.

(g) As TU is now in PMM-Idle mode, it shall send a Service Request (paging response) to NW. If not, test case fails.

1. Establish the first Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device;2. Make the above data connection go into dormant state (e.g. release RB);3. Use the device as a modem to establish the second primary PDP Context with a dial up connection;4. Access an internal web server via the established dial up connection to verify the data connecton works fine;5. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing from the second data connection again.6. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=0 and nsapi6=1 in the IE UplinkDataStatus. Otherwise, test case shall fail.8. Deactivate both PDP contexts.

1. Use the device as a modem to establish the first primary PDP Context with a dial up connection;2. Access an internal web server via the established connection to verify the data connecton works fine;3. Make the above data connection go into dormant state (e.g. release RB);4. Establish the second Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device;5. Initiate a MO voice call;6. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing from the first data connection again.7. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=1 and nsapi6=0 in the IE UplinkDataStatus. Otherwise, test case shall fail.8. Release voice call and deactivate both PDP contexts.

0. Use AT Command CGDCONT to create two separate APNs, for instance PTA and Phone1. Establish the first Primary PDP context by using AT command or by pushing the MediaNet or web browsing key on the device;2. Make the above data connection go into dormant state (e.g. release RB);3. Initiate a MT voice call;4. After the voice call is set up successfully, use the device as a modem to establish the second primary PDP Context with a dial up connection;5. Access an internal web server via the established dial up connection to verify the data connecton works fine;6. Make the data connection go into dormant state (e.g. release RB) for about 10 seconds, then start web browsing from the second data connection again.7. Device shall send Service Request message to SS. In the Service Request message, it shall set both bit nsapi5 =1 and nsapi6 =1 in the IE PDP Status, but set bit nsapi5=0 and nsapi6=1 in the IE UplinkDataStatus. Otherwise, test case shall fail.8. Release voice call and deactivate both PDP contexts.

Test Results (Pass/Fail)Additional Data /

Results/CommentsTest Case Failure Severity

Level

S1 if device can not simultaneously support PS and CS call assuming Multi-RAB support is required. S2 if reconfiguration fails










S1 if device can not simultaneously support PS and SRB


S1 if device can not simultaneously support PS and CS call assuming Multi-RAB support is required. S2 if device does not support multiple PS sessions simultaneously.




S1 if device can not simultaneously support PS and CS call assuming Multi-RAB support is required. S2 if RAB/SRB combination configuration fails


S1 if device can not simultaneously support PS and CS call assuming Multi-RAB support is required.

S2 if device does not support multiple PS sessions simultaneously.

S1 if device can not simultaneously support PS and CS call assuming Multi-RAB support is required. S2 if device does not support 2 PS sessions simultaneously.

S1 if device can not simultaneously support PS and SRB Combination.




S1 if device rejects or fails such RB Reconfiguration Request from NW.

S2 if reconfiguration fails

S1 if the device does not set PDP Status IE or UplinkDataStatus IE correctly

S1 if voice call is dropped abnormally or voice channel does not exist.


S1 if device fails at step (g).


S1 if the device does not send its UL Data Status IE in the Service Request (Data) message when it has data to send on one of its dormant PDPs.

S1 if voice call can not be setup successfully or voice call is dropped during the testing.









S1 if device can not simultaneously support PS and CS call assuming Multi-RAB support is required. S2 if RAB/SRB combination configuration fails




S1 if device rejects or fails such RB Reconfiguration Request from NW.

Sample Test Case for Diff RAB and SRB

Documents

Transcript of Sample Test Case for Diff RAB and SRB