ROD ROTATORS...Rod Rotators Features • Effectively remove paraffin build up • Evenly distribute...
Transcript of ROD ROTATORS...Rod Rotators Features • Effectively remove paraffin build up • Evenly distribute...
Phone: 780-496-9800 Fax: 780-463-9800 Toll Free: 1-877-448-0586 www.plainsmanmfg.com
MADE IN CANADA
Rod Rotators
Features• Effectively remove paraffin build up• Evenly distribute rod and tubing wear• Use with Plainsman PL5 centralizing couplings for maximum effectiveness• Parts interchangeable with existing 302 and 252 rod rotators
3020 Gear Driven
2520 Ratchet Table
3020 3020SG 2520Max.Torque Ouput 240 lb-ft 240 lb-ft 120 lb-ftMax. Recommended Load 40,000 lbs 40,000 lbs 33,000 lbsPolished Rod Size 1-1/8” to 1-3/4” 1-1/8” to 1-3/4” 1-1/8” to 1-1/2”Shipping Weight 48 lbs 48 lbs 35 lbsRotation Type Helical Worm Gear Helical Worm Gear Ratchet TableBody Material Ductile Iron Ductile Iron Ductile IronRotation per 90º Lever Stroke <5º <2.5º 15º RO
D RO
TATO
RS
Specifications subject to change without notice
1. Custom cable lengths available2. Rotators must be under load to operate
3020SG (Slow Gear Driven)
Specifications subject to change without notice
Phone: 780-496-9800 Fax: 780-463-9800 Toll Free: 1-877-448-0586 www.plainsmanmfg.com
MADE IN CANADA
2520 ROD ROTATOR PARTS LIST
2520 Rod Rotator Parts List
1. 2520 Rod Rotators come complete with all the assemblies and parts as shown below 2. Cam shaft bearings can only be ordered as part of cam shaft assembly
Cam Shaft Assembly
Yoke Kit
12
20
ITEM PART DESCRIPTION PART NUMBER1 Housing 4257652 Top Cover 4257663 Ratchet Table 4257694 Rod Loading Bearing 3250155 O-Ring 4257616 Plug 1250017 Holding Pawl 4257718 External Retaining Ring (E-Ring) 4257609 Holding Pawl Bolt 425772
101-1/4” Pilot1-1/2” Pilot
425774425775
11 Actuator Pawl 42577012 Cam Shaft Assembly 42709613 Cam Shaft 42576814 Cam Shaft Bearings 42576315 Cam Shaft Packing Gland 42576716 Oil Seal (for cam shaft packing gland) 42576217 Actuator Lever 42577318 Bolt (for actuator lever) 42576419 Safety Beam Clamp Assembly 42575720 Yoke Kit 42710221 3/16” Galvanized Wire Cable Assembly c/w Ends 425758
19
21
Safety Beam Clamp Assembly
CableAssembly
Specifications subject to change without notice
Phone: 780-496-9800 Fax: 780-463-9800 Toll Free: 1-877-448-0586 www.plainsmanmfg.com
MADE IN CANADA
ITEM PART DESCRIPTION PART NUMBER1 Body 4278522 Rod Load Bearing 4261443 Middle Shaft Bearing 426145
4Worm Drive Shaft 427849Worm Drive Shaft, Slow Gear 431950
5 Actuator Lever 4278486 E-Ring (large) 4261687 Bearing for Actuator Ratchet 4261478 Ratchet Spring 4261679 J-Hook 42907110 Actuator Ratchet Body 42785111 Grease Nipple 42614812 Bearing for Backstop Nut 42614613 Backstop Nut 427850
14Worm Gear 427853Worm Gear, Slow Gear 431951
15 Large O-Ring (body) 42616916 Small O-Ring (Pillar Post) 42614917 Cover cap 427847
181-1/4” Pilot1-1/2” Pilot
425774425775
19 Safety Beam Clamp Assembly 42575720 Yoke Kit 42710221 3/16” Galvanized Wire Cable Assembly c/w ends 425758
Safety Beam Clamp Assembly
Yoke Kit
Actuator Cable
Assembly
19
20
21
1. 3020 Rod Rotators come complete with all the assemblies and parts as shown below
3020 Rod Rotator & 3020 Slow Gear Parts List
3020 ROD ROTATOR PARTS LIST
(8), PB-RODR04