Rion ECO Modular Greenhouse Assembly Instructions

ECO 6 x 7 Greenhouse

Modular greenhouses, garden sheds, outdoor garden elements and accessoriesDesigned and manufactured by Rion

A Member of the Plasson Group

Rion Ltd. Cabri 25120 Israel Tel: +972-4-995-2666 Fax: +972-4-995-2677email: [email protected] homepage: http:\\www.rion.com

2011 by Rion

Authorized Rion DistributorsUSA

Backyard Living Source, Inc. - BLS149 S. Adkins Way, Suite 101 Meridian, ID 83642 +208-287-6601Fax: [email protected]

Canada

Greenwall Solutions Inc.10-8707 Dufferin St., Suite # 384Vaughan, Ontario, Canada L4J 0A6 +905 597 5710Fax +905 597 5710info@greenwallsolutions.comwww.greenwallsolutions.comwww.canada-greenhouse-kits.com

Korea

Dowin Corporation3F Daeki BOD 1031-7 Bangbae-3dongSeocho-gu, Seoul, Korea +82 2 583 8511Fax: +82 2 583 [email protected]

Australia

Oldfields Pty Ltd8 Farrow RoadCampbelltown N.S.W. 2560 +61 2 4627 0777Fax: +61 2 4627 [email protected]://www.oldfields.com.au/treco/index.htm

Germany

Clemens HobbyTec GmbHRudolf-Diesel-Str. 8D-54516 Wittlich / Germany +49 (0) 6571 / 929-222Fax: +49 (0) 6571 / [email protected]

South Africa

Easy Greenhouses CCP.O. Box 538, Olivedale 2158Sales and Support: Linda Hill +27 11 792 7583Mobile: +27 82 777 [email protected]

Czech Republic

Lanit Plast S.R.O.Hlubocinka 809Sulice +420 251 562 734Fax: +420 251 560 278 [email protected]

Great Britain

Two Wests & Elliott4 Unit Carwood Rd.Sheepbridge Ind. Estate Chesterfield Derbyshire S41 9RH +01246 451077Fax: +01246 [email protected]

Scotland

Lomond Horticultural Products Ltd.The Oaks, Balfron StationGlasgow, Scotland, G63 0QN +44(0)1360 [email protected]

New Zealand

Bear ForestPo 404059PuhoiAuckland 1095 +09 422 0879Mobile:027 682 [email protected]

English

IntroductionCongratulations on purchasing a Rion ECO Greenhouse. We are certain that it will give you many happy years of pleasure in your garden.

The Rion ECO Greenhouse has been designed to be as easy to put together as it is beautiful to look at. Most of the work can be done by a single person. Only attaching the roof requires the help of a family member or neighbor for a short while.

Easy assembly methods eliminate the need for special tools or expertise.

Safety First Please read these Assembly Instructions completely before assembly and keep

them in your records so you can refer to them if you wish to add options or make repairs.

The instructions in this manual lead you through each step in the assembly process. It is important for you to follow them closely.

We recommend that you use gloves during assembly. Rion is not responsible for the misuse of tools or parts. If local building codes require permits or licenses make sure that they are

acquired before beginning. Your Greenhouse should be securely anchored to the prepared foundation using

the recommended hardware. If you prepare a concrete foundation do not excavate and pour concrete in

frozen ground. Exercise caution when lifting heavy assemblies. Do not attempt to assemble your Greenhouse in high winds. We recommend that you place your Greenhouse in a spot where it will receive

direct sunlight and will be protected from the wind as much as possible. The door should not face prevailing winds.

When your Greenhouse is fully assembled examine it for sharp edges and trim with a razor knife if necessary.

It is important to clear your Greenhouse of snow in the winter.

If you live in a hot climate, where outside temperatures exceed 46 C (115 F) in the sun or 36 C (99 F) in the shade, this may cause the temperature inside the greenhouse to exceed 55 C (131 F). Such conditions may harm your plants and will damage the greenhouse by warping structural profiles. In order to prevent damage: Ensure good ventilation during hot days. Make sure that the temperature inside the greenhouse never exceeds 55 C

(131 F) by providing a shading screen, such as the Rion ShadeNet (available as an option).

Note: Rion is not responsible for any damage due to high temperatures.Important: Make sure that you check the contents of the greenhouse

packaging against the packing list and the required parts for your model. Do not begin assembly if any parts are missing.

ii ECO Greenhouse Assembly Instructions

How To Use This ManualFirst take a look at page 1 for the parts list. Here you will see:aThe part IDbA drawing of the partcThe number of parts you have received according

to which greenhouse model you have purchaseddA descriptive name of the part, oreDimensions of the part

li ECO Greenhouse Assembly Instructions

Parts Pices Gewchshauselemente Partes

6 x 7

01

4 Corner Frame Connector

2D

8 Frame Connector

3A

s Left Rib Connector

4A

2 Right Rib Connector

5A 10 Rib Connector

6A

2 Left Pediment Connector

7A

2 Right Pediment Connector

8A

2 Top Pediment Connector

09

7 T-Oval Connector

10 2 Oval Junction Connector

B2

6 50 cm17F

B70 6 61.8 cm2E

R1

4 113 cm38A

R2 4 53.4 cm19

R3 4 47.7 cm16C

E1

10 113 cm3' 8A"

E2 14 54 cm1' 9B"

E3 4 52.2 cm18L)

E4 6 39.4 cm1' 3A"

E5 4 13.4 cm5B"

E7 22.9 cm9"

E71 44.5 cm1' 1K"

E72 15 65.8 cm2' 1G"

SR1

1 40 cm13C

DoorW1

1 Door Handle Connector

D1

2 Side Cap

D2 2 Middle Cap

6 x 7

PN70

6 71.5 118.3 cm2' 4D" 3' 10L"

PN71

6 59.7 118.3 cm1' 11A" 3' 10L"

PN75 2 72.3 66.7 cm)2' 4A" 2' 2B"

PN76 1 72.3 64.7 cm2' 4A" x 21A

PN77

4 73.5 66.7 cm 2' 5O" 2' 2B"

PN78

4 73.5 64.7 cm2' 5O x 21A

PN73L

2 58.1 44.9 cm1' 10G" 1' 5M"

PN73R

2 58.1 44.9 cm1' 10G" 1' 5M"

PN72

2 109.9 17.9 cm37B x 7

PN61

2 59.7 44.7 cm1' 11A" 1' 5F"

WIN34 1 Roof Vent

WIN35 - Roof Vent

WINH31 2 Roof Vent Handle

6 x 7

a b c de

Every assembly step begins with an Overview Page. In this example you see:aThe name of the assemblybThe portion of the greenhouse to be assembled,

shown in greencSpecial instructions that will help you in your

assembly.

1 ECO Greenhouse Assembly Instructions

6 x

76

x5

6 x

2.5

Frame Chssis Rahmen Marco

Assemble the frame on a flat surface (such as a driveway or a garage) and then move it into position when it is completed

Montez le chssis sur une surface plane (par exemple une alle ou un garage) et dplacer-le ensuite pour le positionnez au bon endroit une fois son assemblage termin.

Setzen Sie den Rahmen auf einer flachen Flche (zum Beispiel einer Einfahrt oder einer Garage) zusammen und tragen ihn nach Fertigstellung an den endgltigen Standort.

Monte el marco en una superficie plana (tal como una calzada o un garaje) y despus trasldelo a la posicin cuando completado.

a

b

c

iv ECO Greenhouse Assembly Instructions

Follow the assembly instructions step-by-step. In this example, you see:aThe step numberbParts needed for this stepcTools needed for this stepdA drawing of the parts. their ID, and how to align themeA number indicating previously-assembled part

required for this step. Here you should use what you assembled in step 2.

fWhere to insert pins to lock parts in placegThe location of the doorway. Here you can see that

the door hinge is placed outside the greenhouse.hSpecial instructions that will help you in your

assembly.

2 ECO Greenhouse Assembly Instructions Frame Chssis Rahmen Marco

1

20p

Some glazing elements (RA, RB, RC, and RD) are placed inside the long profiles in the interests of space.

Certains lments de vitrage (RA, RB, RC et RD) ont t placs l'intrieur des longs profils pour gagner de la place.

Einige Verglasungselemente (RA, RB, RC und RD) wurden aus Grnden der Platzersparnis in die langen Profile gelegt.

Algunos elementos de vidrio (RA, RB, RC, y RD) estn colocados dentro de los perfiles largos para ahorrar espacio.

3#

B2x 1

SR1x 1

2D

Door22

BKWBKN

BKB

2Dx 1

Door22x 1

(50 mm)

BKNx 2BKWx 2BKBx 2

B2

SR1

Pin1x 2

2

1

a

b c de

h

g

f

Example

Assembly TechniquesUsing Pins

When you see the Pin icon do the following:

Put a Pin1 pin on the GT1 Glazing Tool.Align the pin with the indicated hole and push it in until it snaps

secure.Release the GT1 Glazing Tool and continue inserting pins where

indicated.

To disassemble parts remove the pins by placing the end of the GT1 Glazing Tool into the hole of the pin and levering it out.

Using Glazing ElementsGlazing elements (RA, RB, RC, and RD) used to secure panels to the greenhouse.

In order to maintain the life of your greenhouse, it is essential to insert glazing elements fully and completely. Attach them to the profiles as follows:Moisten the glazing element with soapy water. Insert one end of the glazing element into the profile until it snaps

into place.Push the glazing element along its length.Continue until the end of the glazing element. It will snap into place.The callout () shows an enlarged cross-section of the profile and glazing element when it is seated correctly

vi ECO Greenhouse Assembly Instructions

Inserting Roof PanelsOnce the glazing elements are in place, insert panels and windows in the following manner:Make sure that the plastic identification strip indicating the side

with UV protection is facing outside.Peel away a little portion of both edges of the ID strip. Slip one corner into the RD glazing element.Continue inserting the panel until it is fully in.Center the panel, if necessary.The callout () shows an enlarged cross-section of the profile and glazing element when it is seated correctly

In this example, first insert the panel into the lower RD glazing element, following the steps above.

Then bend the panel so it will enter the top glazing element.The callout () shows an enlarged cross-section of the lower profile and glazing element, and () of the upper profile and glazing element when they are seated correctly.

Prepare a FoundationBefore assembling your new Greenhouse a proper foundation must be prepared. A number of anchoring options are possible, based on wind and ground conditions in your area.

Make sure that you have checked with your local authorities regarding any required building permits.

Decide at this time the final orientation of your Greenhouse. We recommend that you place your greenhouse in a spot where it will receive direct sunlight and will be protected from the wind as much as possible. The door should not face prevailing winds.

It is important to clear your Greenhouse of snow in the winter.

Note: You may assemble the greenhouse on its base on a hard surface and move it to its final position when you have finished. Make sure that there are no obstructions between the assembly area and the final position.

Treated Wood BaseBuild a framework composed of 4 6 () and 2 12 () treated lumber using deck screws or galvanized lag bolts and fill it with gravel or earth or other suitable material to fill the base up to the top surface of the 4 6 (). Attach the greenhouse frame through the connectors using screws that are 6 mm (B") in diameter and no less than 70 mm (2C") long (not supplied).

Wood DeckYour Greenhouse can be secured to a wood deck with screws (not supplied) through the frame connectors. Use screws that are 6 mm (B) in diameter and no less than 70 mm (2C) long. Make sure that the wood deck itself is securely anchored to the ground. See hardware quantities and foundation measurements.

Excavated TrenchYour Greenhouse can be placed in an excavated trench to anchor it to the ground. See the foundation measurements for dimensions.

Concrete FoundationPrepare a poured concrete foundation according to local building codes. Do not excavate and pour concrete in frozen ground. Make sure that there is a slight slope for drainage.

Pour at least 10 cm (4") larger than the size of the greenhouse. The Greenhouse is secured to the concrete foundation using screws and concrete anchors or expansion anchors (not supplied). Use screws 6 mm (B") in diameter and no less than 70 mm (2C") long. A drill with an appropriate masonry bit is required.

Base Width Base Length Fill Quantity Screw/Lagbolts

6 x 7 2.03 meter (6 7G) 2.38 meter (7 9C) 4.8 cubic meters (51.6 cubic feet)

24

Foundation Width Foundation Length Screw/anchor set or expansion anchor

6 x 7 2.07 meter (6 9") 2.41 meter (7 10O) 24

viii ECO Greenhouse Assembly Instructions

Assembly Tips and Notes

General1 Remove everything from your packages and sort them according to part type

when you begin assembly.

2 The part code is stamped on each connector.

3 Use a tape measure to select the correct profile and glazing element for each step.

4 Some glazing elements (RA, RB, RC, and RD) are placed inside the long profiles in the interests of space.

5 Panels are identified with stickers.

6 Protect unassembled panels from the sun to prevent identification stickers from adhering to the glazing.

7 Moisten parts with soapy water to make them easier to assemble.

8 To disassemble parts remove the pins using the pin tool. Place the end into the exposed hole and lever the pin out.

9 If a hole in the connector is missing, drill a hole with a 6 mm (") drill bit through the assembled profile and then insert the pin.

10 In extremely rare cases connectors will not slip into some round or oval profiles. In this case place the affected part into 10 cm (4) of boiling water for 15 seconds before connecting.

Frame11 Assemble the frame on a flat surface (such as a driveway or a garage) and then

move it into position when it is completed

Glazing12 Moisten glazing elements before insertion. See Using Glazing Elements (p. v)

for more information.

Panels13 See Inserting Roof Panels (p. vi).

14 The plastic identification strip indicates the side of the panel which must face the outside in order to provide UV protection. Peel off the edges of the strip before inserting them in profiles.

15 Remove the identification strip on the panels at the end of assembly.

Roof16 If you need to remove the roof caps push them on one side and lift.

17 Place the roof on the columns and circle around the greenhouse and insert the first 1 cm (") of the roof connectors into the columns. Panel by panel, circle around the greenhouse and lower the roof into place. Use the GT1 Glazing Tool to guide the corners of the panels into the channels.

Door18 The larger handle always faces the outside.

19 Use the Door Latch to keep the door closed against the wind. We do not recommend closing the door when you are inside.

Finishing Touches20 Examine your Greenhouse for sharp edges and trim with a razor knife if

necessary.

21 It is important to clear your Greenhouse of snow in the winter.

22 Rion offers a wide range of options for your new Greenhouse, including modular shelves, irrigation systems, additional windows, automatic window openers, and others.

23 Seal any gaps between the upper panels and profiles using SF soft foam insulation. Cut pieces of SF soft foam insulation 2.5 cm (1") long, remove the adhesive backing, and place where shown, making sure that the area is clean and dry.

Rion Limited Warranty1. Warranty Coverage

Subject to the exclusions set forth below, Rion Ltd. warrants that the greenhouse covered by this warranty (the "Greenhouse" or the "Product") is warranted to the original purchaser only ("Purchaser") against damage or breakage caused, through normal use for the purpose intended by Rion Ltd. and in accordance with its instructions, by any defects in material or workmanship for the following periods:

(a) With respect to the Product's structure (i.e., the profiles of the Greenhouse) - for a period of 5 years from the original date of purchase ("Purchase Date").

(b) 1.1With respect to Discoloration and/or fading of the Greenhouse's panels caused through normal use- for a period of 10 years as of the Purchase Date. For the removal of doubt, this warranty does not cover discoloration caused by use of chemicals and/or any other reason other than exposure to the sunlight.

(c) 1.2With respect to malfunction and/or possible distortions of the Greenhouse's jointers- for a period of 7 years as of the Purchase Date.

(d) 1.3The Purchaser's exclusive remedy is as set forth in Section ?5 ("Remedies") below, and applies to the Greenhouse purchased in _________, only when accompanied by this written warranty.

2. Notification of Claims

If Purchaser believes that the Greenhouse is defective in material or workmanship, then written notice providing details of the alleged defect must be sent by Purchaser to the local representative as per our website's contact list at www.rion.com, within 30 days after discovery of alleged Product defect, and in any event within the warranty period. Any such notice must note Purchase Date and include documentary evidence thereof (such as invoice or receipt) in order to establish warranty eligibility. Repair or replacement of any Product or part thereof will not extend the warranty period as to the entire Product. Repaired or replaced parts shall be subject to a specific warranty for a period of 90 days, following repair or replacement, or the remaining period of the Product part's warranty, whichever is greater.

3. Exclusions from Warranty Coverage

This warranty provides a remedy only for defects reported in accordance with section 1.c above. In addition this warranty does not provide a remedy in any of the events specified below:

(a) This warranty does not cover Greenhouses larger than 8 or 6 foot by 16 foot.

(b) This warranty does not cover Greenhouses in climates in which the temperature exceeds 50 (fifty degrees) Celsius (122 degrees Fahrenheit) or have a load exceeding 50 kg / 110 Lb per 1 Sq. Mr. / 10.89 Sq. Ft.

(c) This warranty does not apply to Product exposed to wind speed exceeding 90 KM/HR (55 Miles/HR).

(d) Rion shall have no liability or obligation to Purchaser with respect to any Greenhouse covered by this Warranty which is subjected to any of the following: abuse; improper use or operation; incorrect handling; use of force; negligence or accident; modification; alteration; impact from foreign objects; vandalism; pollutants; set-up on an un-level foundation; painting; fading; assembly not in accordance with the users manual; failure to follow the instructions outlined in the users manual; failure to follow the maintenance procedures in the service manual for the Greenhouse where a schedule is specified for regular replacement or maintenance of certain parts (based on usage) and Purchaser has failed to follow such schedule; failure to erect the Greenhouse according to the instructions provided by Rion; defects or damage that result from purchaser constructing the Greenhouse using components other than original Rion components supplied by Rion; attempted repair by non-qualified personnel; defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Rion, or anyone authorized by it; operation and/or use of the Greenhouse outside of the published parameters and for purposes other than those defined by Rion in ______ manual, or if such Products' original identification (trademark, serial number) markings have been defaced, altered, or removed; normal wear and tear; defects or damage that result from the use of Non-Rion branded or certified Greenhouse or other peripheral equipment; acts of God such as earthquakes, tornados, floods, hail, storms, hurricanes, blizzards, floods, fire effects or other similar severe weather or similar natural phenomena; any other act which is not the fault of Rion is excluded from coverage. Rion excludes from warranty coverage Greenhouses sold AS IS and/or with ALL FAULTS and excludes used Greenhouses which have not been sold by Rion (or by those authorized to do so by Rion) to the Purchaser. Warranty coverage is only valid within ______________.

4. Exclusion of Implied Warranties; No other Expressed Warranties;

Except for the foregoing warranty and without derogating from provisions of Section ?3 ("Exclusions from Warranty Coverage") above, Rion hereby disclaims and excludes all other warranties, express or implied, including but not limited to any and/or all implied warranties of merchantability, fitness for a particular purpose or any other warranties otherwise arising from a course of dealing or a usage of trade or advertising (except where such warranties arise under applicable consumer product warranty laws and cannot lawfully be disclaimed, in which event such warranties are limited to their minimum applicable scope and to the shortest period permitted or required under applicable law). Rion hereby disclaims any representation or warranty that the Greenhouse is compatible with any combination of non-Rion products Purchaser may choose to connect to the Greenhouse.

In no event shall Rion be liable, whether in contract or tort (including negligence) for damages in excess of the purchase price of the Greenhouse, or for any indirect, incidental, special or consequential damages of any kind, including but not limited to, personal physical injuries to any person, compensation, reimbursement or damages on account of loss of revenue or profits, loss of business, loss of information or data, or other financial loss arising

x ECO Greenhouse Assembly Instructions

out of or in connection with the ability or inability to use the products to the full extent these damages may be disclaimed by law, or for breach of any expressed written or oral or implied warranty on Greenhouses.

5. Remedies

This section provides for the sole remedy available to the Purchaser from Rion for any defect in the Greenhouse proven to be defective in material or workmanship under normal use during the relevant Warranty Period. In the event of any defect covered hereby, or any implied warranty, Rion at its sole discretion shall replace the defective Product or any part thereof which requires replacement or pay the replacement cost. Rion reserves the right to make substitutions for warranty claims if parts or the Greenhouse are unavailable or obsolete. Purchaser's failure to make a claim as provided in section 2 above or continued use of the Greenhouse shall constitute an unqualified acceptance of such Greenhouse and a waiver by Purchaser of all claims thereto.

Rion reserves the right to discontinue or change any of its products, including colors, without notice. Should a Greenhouse or a part thereof covered by this Warranty be unavailable, Rion reserves the right to substitute a Greenhouse or part thereof that is of equal value according to Rion's sole discretion, or to provide Purchaser with a refund which reflects the cost of the Greenhouse or the part thereof. Taxes, shipping costs, inconvenience, loss of use, installation fees, incidental or consequential damages are not covered by this Warranty.


Parts

6 x 7

01

4 Corner Frame Connector

2D

8 Frame Connector

3A

s Left Rib Connector

4A

2 Right Rib Connector

5A 10 Rib Connector

6A

2 Left Pediment Connector

7A

2 Right Pediment Connector

8A

2 Top Pediment Connector

09

7 T-Oval Connector

10 2 Oval Junction Connector

B2

6 50 cm17F

B70 6 61.8 cm2E

R1

4 113 cm38A

R2 4 53.4 cm19

R3 4 47.7 cm16C

E1

10 113 cm3' 8A"

E2 14 54 cm1' 9B"

E3 4 52.2 cm18L)

E4 6 39.4 cm1' 3A"

E5 4 13.4 cm5B"

E7 22.9 cm9"

E71 44.5 cm1' 1K"

E72 15 65.8 cm2' 1G"

SR1

1 40 cm13C

DoorW1

1 Door Handle Connector

D1

2 Side Cap

D2 2 Middle Cap

6 x 7

PN70

6 71.5 118.3 cm2' 4D" 3' 10L"

PN71

6 59.7 118.3 cm1' 11A" 3' 10L"

PN75 2 72.3 66.7 cm)2' 4A" 2' 2B"

PN76 1 72.3 64.7 cm2' 4A" x 21A

PN77

4 73.5 66.7 cm 2' 5O" 2' 2B"

PN78

4 73.5 64.7 cm2' 5O x 21A

PN73L

2 58.1 44.9 cm1' 10G" 1' 5M"

PN73R

2 58.1 44.9 cm1' 10G" 1' 5M"

PN72

2 109.9 17.9 cm37B x 7

PN61

2 59.7 44.7 cm1' 11A" 1' 5F"

WIN34 1 Roof Vent

WINH31 2 Roof Vent Handle

DSN

4.5 m Rubber Door Seal

SF .5 m Soft Foam Insulation

6 x 7


Tools RA2

3 69.1 cm2' B"

RB1

12 52 cm1' 8A"

RB3 4 47.5 cm1' 6M"

RC1

8 66.6 cm2' 2B"

RC2 8 63 cm2'C"

RC10 3 69.8 cm2' 3A"

RD3

12 68.7 cm2' 3"

PIN1

380 Conecting Pins

GT1

2 Glazing Tool

18

2 Corner Oval Connector

Door Joint KitASM80 2 WingnutASL80 2 WasherAS80 2 80 mm Screw

BKN

2 Nut

BKW 2 WasherBKB 2 50mm Screw

Dow1

1

6 x 7

Hinged Door Kit18D

2 Corner Oval Door Hinge Connector

Hinge

1 Upper Door Hinge

Door22

1 Lower Door Hinge

Dow2

1 Door Latch

LI6

1 Door Holder

6 x 7

Spirit Level

Safety Gloves

Razor Knive

Pliers

Power Drill

Hammer

Scissors

Screwdriver

Tape measure


6 x

76

x5

6 x

2.5

Frame

Assemble the frame on a flat surface (such as a driveway or a garage) and then move it into position when it is completed

6 ECO Greenhouse Assembly Instructions Frame6

x7

6x

56

x 2

.5

1

20p

Some glazing elements (RA, RB, RC, and RD) are placed inside the long profiles in the interests of space.

3#

B2x 1

SR1x 1

2D

Door22

BKWBKN

BKB

2Dx 1

Door22x 1

(50 mm)

BKNx 2BKWx 2BKBx 2

B2

SR1

Pin1x 2

2

1

7 ECO Greenhouse Assembly Instructions Frame

6 x

76

x5

6 x

2.5

4

5

6

01x 1

B2x 1

Pin1x 2

2Dx 1

Pin1x 2

01B2

32D

B2x 1

01x 1

Pin1x 2

B2

01


x7

6x

56

x 2

.5

7

Pin1x 4

4

5

6


6 x

76

x5

6 x

2.5

8#

B2x 3

01x 2

2Dx 2

Pin1x 12

B2

01

B2

B2

01

2D

2D


x7

6x

56

x 2

.5

9

B70x 2

Pin1x 4

7

B70

B70


6 x

76

x5

6 x

2.5

10

B70x 2

2Dx 2

Pin1x 8

9

2D

B70

B70

2D


x7

6x

56

x 2

.5

11

10

B70

B70

2D

2D

B70x 2

B70x 2

2Dx 2

Pin1x 8


6 x

76

x5

6 x

2.5

12

11

8

Pin1x 4


x7

6x

56

x 2

.5

13


6 x

76

x5

6 x

2.5

14 Prepare a Foundation (p. vii)


6 x

76

x5

6 x

2.5

Roof

Moisten glazing elements before insertion. See Using Glazing Elements (p. 9) for more information.

18 ECO Greenhouse Assembly Instructions Roof6

x7

6x

56

x 2

.5

15

The plastic identification strip indicates the side of the panel which must face the outside in order to provide UV protection. Peel off the edges of the strip before inserting them in profiles.

6A

E5

E2

09

R3

8A

PN79 LOGO

6Ax 1

8Ax 1

09x 1

E5x 1E2x1

R3x1

PN79 LOGOx1

Pin1x 10

19 ECO Greenhouse Assembly Instructions Roof

6 x

76

x5

6 x

2.5

160p

7Ax 1

09x 1

E5x 1R3x1

Pin1x 10 15

7AE5

09

R3


x7

6x

56

x 2

.5

17


7A

E5 09

R3

PN72

8A

E2

7Ax 1

8Ax 1

09x 1

E5x 1E2x1

R3x1

PN72x1

Pin1x 6


6 x

76

x5

6 x

2.5

180p

6Ax 1

R3x1

09x 1

E5x 1Pinx 10

17

6A

E5

R3

09


x7

6x

56

x 2

.5

19


16

3A

R2

E4PN73L

E2

09

3Ax 1

09x 1

E2x1

E4x1

R2x1

PN73Lx1

Pin1x 10


6 x

76

x5

6 x

2.5

20


19

4A

PN73R

E4 R2

E2

09

4Ax 1

09x 1

E2x1

E4x1

R2x1

PN73Rx1

Pin1x 5


x7

6x

56

x 2

.5

21

3Ax 1

4Ax 1

10x 2

E2x 3

Pin1x 12

4A

E210

3A

E210

E2


6 x

76

x5

6 x

2.5

22

R2x2

E4x2

PN73Lx1

PN73Rx1

PN61x 1

Pin1x 8

R2 18

PN72R

E4 PN73L

R2PN61


x7

6x

56

x 2

.5

23

Pin1x 8

21

22


6 x

76

x5

6 x

2.5

24

E2x 2

E3x 2

5Ax 5

Pin1x 16

5A

E2

E3

E3

E2

5A 5A

5A

5A


x7

6x

56

x 2

.5

25

E72x5

Pin1x 20

23

E72

E72

E72

E72

24

E72


6 x

76

x5

6 x

2.5

26

E2x 2

E3x 2

5Ax 5

Pin1x 16

5A

E2

E3

E3

E2

5A 5A

5A

5A


x7

6x

56

x 2

.5

2725

E72

E72

E72

E72

26

E72

E72x5

Pin1x 20


6 x

76

x5

6 x

2.5

28

20

E72

27

E72

E72

E72

E72

E72x5

Pin1x 20


x7

6x

56

x 2

.5

29

28

RA2

RB1

RD3RB1

RB3

RA2

RD3

RD3

RA2

RB3

RB3

RD3

RA2

RA2x 3

RB1x 2

RB3x 2

RD3x 3

Moisten glazing elements before insertion. See Using Glazing Elements (p. v) for more information.


6 x

76

x5

6 x

2.5

30

WIN34

WINH31x 2

WIN34

WINH31

WINH31


x7

6x

56

x 2

.5

31

The plastic identification strip indicates the side of the panel which must face the outside in order to provide UV protection. Peel off the edges of the strip before inserting them in profiles. See Inserting Roof Panels (p. 10).

PN78x 2

29

PN78

PN78

30

PN78


6 x

76

x5

6 x

2.5

32


RC2x 4

31

RC2

RC2

RC2

RC2

RC2

RC2


x7

6x

56

x 2

.5

33

32

RD3RB1

RD3

RB1

RB1

RB1

RD3

RD3

RD3

RB1x 4

RD3x 3



6 x

76

x5

6 x

2.5

34

33

PN77

PN77

PN75

PN77

PN77

PN75x 1

PN77x 2


x7

6x

56

x 2

.5

35

34

RC1

RC1

RC1

RC1

RC1

RC1x 4



6 x

76

x5

6 x

2.5

36


RB1x 2

RB3x 2

RD3x 3 35

RB3

RD3RB3

RD3

RB1

RB1

RD3

RD3

RB3


x7

6x

56

x 2

.5

37


PN76x 1

PN78x 2

36

PN76

PN78

PN78

PN78


6 x

76

x5

6 x

2.5

38

37

RC2

RC2

RC10

RC10

RC2

RC2

RC2

RC10


RC10x 3

RC2x 4


x7

6x

56

x 2

.5

39

38

RD3

RB1

RD3

RB1RB1

RD3 RB1

RD3

RB1


RB1x 4

RD3x 3


6 x

76

x5

6 x

2.5

40


PN75x 1

PN77x 2

39

PN77

PN75

PN77

PN77

PN77


x7

6x

56

x 2

.5

41

40

RC1

RC1

RC1

RC1

RC1

RC1x 3



6 x

76

x5

6 x

2.5

42

If you need to remove the roof caps push them on one side and lift.

D1x2

D2x 2

41

D1

D1

D2

D2


6 x

76

x5

6 x

2.5

Walls

48 ECO Greenhouse Assembly Instructions Walls6

x7

6x

56

x 2

.5

43

R1x4

Pin1x 8

14

R1

R1

R1

R1

49 ECO Greenhouse Assembly Instructions Walls

6 x

76

x5

6 x

2.5

44

E1x 8

43

E1

E1

E1

E1

E1

E1

E1

E1


x7

6x

56

x 2

.5

45

Pin1x 16

44


6 x

76

x5

6 x

2.5

46

PN71x1

45

PN71


x7

6x

56

x 2

.5

47

PN71x1

46

PN71


6 x

76

x5

6 x

2.5

48

PN70x3

47

PN70

PN70

PN70


x7

6x

56

x 2

.5

49

PN71x3

48

PN71

PN71

PN71


6 x

76

x5

6 x

2.5

50

PN70x3

49

PN70

PN70

PN70


x7

6x

56

x 2

.5

51 Place the roof on the columns and circle around

the greenhouse and insert the first 1 cm (") of the roof connectors into the columns. Panel by panel, circle around the greenhouse and lower the roof into place. Use the GT1 Glazing Tool to guide the corners of the panels into the channels.

42

50


6 x

76

x5

6 x

2.5

52

Pin1x 18

51


6 x

76

x5

6 x

2.5

Door

60 ECO Greenhouse Assembly Instructions Door6

x7

6x

56

x 2

.5

53

54

The larger handle always faces the outside.

18Dx 1

18x 1

E2x1

E4x2

Pin1x 8

E4

18

E4

E2

18D

18D

Doorw1x 1

09x 1

E2x1

DOW1x2Pin1x 3

09

DoorwW1

E2

DOW1

61 ECO Greenhouse Assembly Instructions Door

6 x

76

x5

6 x

2.5

55


56

PN61x 1

Pin1x 2 PN61

53

54

18Dx 1

18x 1

E1x 2

E2x1

Pin1x 8 18

E2

E1

E1

18D


x7

6x

56

x 2

.5

57


58

PN71x 1

Pin1x 2

PN71

55

56

DSN

DSN57

DSN

DSN

DSN

DSN


6 x

76

x5

6 x

2.5

59

Use the Door Latch to keep the door closed against the wind. We do not recommend closing the door when you are inside.

LI6x 1

LI6


x7

6x

56

x 2

.5

60

Upper Door Hingex 1

(80 mm)

AS80x 1ASL80x 1ASM80x 1DOW2

59

AS80

Upper Door Hinge

DOW2

ASL80ASM80

Upper Door Hinge


6 x

76

x5

6 x

2.5

61

(80 mm)

AS80x 1ASL80x 1ASM80x 1

60

AS80ASL80ASM80

58


x7

6x

56

x 2

.5

62 Remove the identification strip on the panels at the end of assembly.

Examine your Greenhouse for sharp edges and trim with a razor knife if necessary. 61


6 x

76

x5

6 x

2.5

63

Seal any gaps between the upper panels and profiles using SF soft foam insulation. Cut pieces of SF soft foam insulation 2.5 cm (1") long, remove the adhesive backing, and place where shown, making sure that the area is clean and dry.

SF

62

SF

ECO GreenhouseRion Ltd. Cabri 25120 Israel Tel: +972-4-995-2666 Fax: +972-4-995-2677

email: [email protected] homepage: http:\\www.rion.comVersion 25032011

ECO 6 x 7 GreenhouseEnglishIntroductionSafety FirstHow To Use This ManualAssembly TechniquesUsing PinsUsing Glazing ElementsInserting Roof Panels

Prepare a FoundationTreated Wood BaseWood DeckExcavated TrenchConcrete FoundationAssembly Tips and NotesGeneralFrameGlazingPanelsRoofDoorFinishing TouchesRion Limited Warranty

PartsFrame1234567891011121314

Roof15161718192021222324252627282930313233343536373839404142

Walls43444546474849505152

Door5354555657585960616263

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

Rion ECO Modular Greenhouse Assembly Instructions

Documents

Transcript of Rion ECO Modular Greenhouse Assembly Instructions