Report on In-house Internship I) II) III)Project Report + Code + Video submission Presentation and...
Transcript of Report on In-house Internship I) II) III)Project Report + Code + Video submission Presentation and...
Report on
In-house Internship
• Event Details:In-house Internship was conducted on following topics
I) Problem Based Products.
II) Arduino Based Product.
III) Photoshop and In Design.
• Date:18th June- 30th June 2018
• Venue: TCET Lab. No.118, 105 and 103, First floor EXTC department.
• Participants: SE-EXTC (A &B) ,TE- EXTC (A &B), and TE ETRX (Total 54) students
• List of students
I) Problem Based Product
II) Arduino Based Product.
Sr. No. Name of Student Class/ Div
1 Smriti Singh SE EXTC- B
2 Rahul Varma SE EXTC- B
3 Jaikumar Yadav SE EXTC- B
4 Bhandari Sanjeeva TE EXTC-A
5 Khan Zaid TE EXTC-A
6 Khan Zohra TE EXTC-A
7 SaminaGogari TE EXTC-A
Sr. No. Name of Student Class/ Div
1 Aanwi Tarihalkar SE EXTC- B
2 Dharana Singh SE EXTC- B
3 Sonal Singh SE EXTC- B
4 Akansha Gupta SE EXTC- A
5 Suraj Pal SE EXTC- B
6 Adarsh Singh SE EXTC- B
7 Vaibhav Yadav SE EXTC- B
8 Rakesh Kumar Gupta SE EXTC- A
9 Sanket Bari TE EXTC- A
10 Sunil Kumar Kannaujiya TE EXTC- A
11 Dheeraj Singh TE EXTC- B
12 Rohit Gupta SE EXTC- A
13 Ankit Gupta SE EXTC- A
14 Arjun Gupta SE EXTC- A
15 Ashwani Gupta SE EXTC- A
16 Sachin Mishra SE EXTC- A
III) Photoshop and In Design.
Sr. No. Name of Student Class/ Div
1 Akash Pathak TE EXTC-B
2 Alok Singh TE EXTC-B
3 Devesh Singh TE EXTC-B
4 Prachi Thakur TE EXTC-B
5 Jyoti Tiwari TE EXTC-B
6 Urja Tiwari TE EXTC-B
7 Kajal Yadav TE EXTC-B
8 Tanya Tripathi TE EXTC-B
9 Prathamesh Tendulkar SE EXTC-B
10 Ashish Bishnoi TE EXTC-A
11 Snehil Dandwate TE EXTC-A
12 Kapil Bidikar TE EXTC-A
13 Miten Dalsaniya TE EXTC-A
14 Pransu Shrivastav TE EXTC-B
• Objectives:
o It will also develop skills in engineering students so that they can use the knowledge
acquired in the internship to implement their ideas on product development.
o Assist the student's development of skills such as teamwork, communications and
attention to detail.
o Students improved their logic building and programming skills in Arduino Uno.
Students implemented small projects in Arduino Uno for Satellite Communication.
o It will help students to develop logic building and programming skills in Arduino Uno.
17 Siddhant Jaiswal SE EXTC- A
18 Vivek Gupta SE EXTC- A
19 Hiral Pal SE EXTC- A
20 Satyaprakash Mishra SE EXTC- A
21 Abhishek Nirmal SE EXTC- A
22 Asad Khan SE EXTC- A
23 Satyam Singh SE EXTC- B
24 Utkarsh Shukla SE EXTC- B
25 Shishir Tripathi SE EXTC- B
26 Rana Shivamev Singh SE EXTC- B
27 Arunendra Singh TE ETRX
28 Sourav Dambal SE EXTC- A
29 Anjali Gupta SE EXTC- A
30 ApurvaTejani TE EXTC-B
31 Rahul Gupta TE EXTC-B
32 Tarun Patangia TE EXTC-B
33 Ayush Jalgaonkar SE EXTC- A
o Students will be able to build small projects and participate in various project
competitions.
o Enhance and/or expand the student's knowledge of a particular area(s) of designing
using photoshop.
o It will create an excitement in the young minds and will definitely develop their
interest in software skills.
o It will also develop skills in engineering students so that they can use the knowledge
acquired in the internship to implement their ideas on product development.
o Develop TCET departmental magazine.
• Staff Involved:
o Dr. Lochan Jolly - Dean, SSW.
o Ms. Anvita Birje (AP- EXTC)
o Ms. Megha Gupta (AP- EXTC)
o Mr. Niket Amoda(AP- EXTC)
• Introduction
o For any country to grow there is a need to develop an attitude in young generation
where they should want to know “how things happen” and “where they can apply
those concepts for betterment of society”. Looking at the need many foreign country
governments are insisting and motivating their younger generations to take science
courses.
o Students now a day are very much interested in technology. The details they get from
websites are useful. And hence they are also eager to design their own websites.
o Therefore, we developed in house Internship programme for the specially second year
students
o The internship used Photoshop and In design designing tool which is very convenient
and requires their creativity.
o Students are made aware of all the tools available in photoshop.
o The entire Internship programme took about 2weeks from18th June- 30thJune 2018.
o Components required for this internship project issued from R& D cell of TCET and
all other expenses borne by EXTC department.
• Schedule detail:
Sr.
No. Day, Date Time
Topic
I course
Topic
II course
Topic
III course
1 Mon, 18th
Jun 2018
9:30-
5:30 Problem Definition
Brief session on Satellite
Communication
Introduction to
Photoshop by Mr.
Shivank Sharma,
Alumni, Sales
Manager, Reliance Jio
2 Tue, 19th Jun
2018
9:30-
5:30
Testing of various
components
Understanding problem
definition and
finalization of group
Understanding
Photoshop, Making a
logo/poster (to
check the
understanding)
3
Wed, 20th
Jun 2018 9:30-
5:30
Application of
Solenoid and motor
by Mr. Lalit Chawla
Application of Solenoid
and motor by Mr. Lalit
Chawla
Designing templates
for Departmental
Magazine
4
Thu, 21stJun
2018 9:30-
5:30 Testing of circuits
Ardunio Workshop
Finalization of topics and
components requirement
for individual project
groups.
Cover Page Design
for Department
Magazine
5
Fri, 22nd Jun
2018 9:30-5:30
Industrial Visit to
EL guard,
Kandivali(W)
Industrial Visit to EL
guard, Kandivali(W)
Exploring multiple
websites for template
design
6 Mon, 25th
Jun 2018 9:30-5:30 Testing of circuits
Logic building and
writing pseudo
code for the problem
definition
Introduction to In
design
7 Tue, 26th Jun
2018 9:30-5:30
Implementation of
tested circuit on
zero PCB
Coding and debugging
and project
implementation
Implementation of In
design
8
Wed, 27th
Jun 2018 9:30-5:30
Designing
kits/products to
demonstrate
Coding and debugging
and project
implementation
Introduction to Web
Development
9
Thu, 28thJun
2018 9:30-5:30
Designing a
kits/products to
demonstrate
Demonstration of projects
to Expert from TCS Mr.
Prasad Rangnekar
Sample Magazine
design
10
Fri, 29th Jun
2018
9:30-5:30
Documentation
I) Manual
II) Report
III) Video
Recording
Project Report + Code +
Video submission
Presentation and
Competition
11
Sat, 30th Jun
2018 9.30-
1pm
Evaluation by, Mr.
JersonFernandes,
Embedded System
Designer
Evaluation by, Mr.
JersonFernandes,
Embedded System
Designer
Evaluation by, Mr.
AnshulSinha,AP-TSAP
In-House Internship Feedback A.Y.2017-18(Even Sem)
Student’s response I course II course III course
1. I was well informed about the objectives of this internship. 4 4.4 4.3
2. The content is relevant to my branch. 4.25 4.9 4
3. The program was well paced within the allotted time. 3.75 4.4 4.4
4. The instructor was well prepared. 4 4.2 4.4
5. The material was presented in an organized manner. 4.25 4.5 4.4
6. The activities in this internship gave me sufficient practice
and feedback.
4 4.4 4.4
7. The difficulty level of this internship was appropriate. 3.75 4.6 4.5
8. The internship was a good way for me to learn content. 4 4.7 4.6
9. I will be able to use what I learned in this internship in
projects.
4 4.4 4.3
10. I would be interested in attending a follow-up, more
advanced internship on this same subject.
4 4.4 4
11. Institute provided me all the required resources. 4.25 4.7 4.1 Average marks on a 1 to 5 Scale:1 = "Strongly disagree," or the lowest, most negative impression, 3 = "Neither agree nor disagree,"
or an adequate impression , 5 = "strongly agree," or the highest, most positive impression.
• Differentiation:
▪ This time in in-house internship industrial visit was planned.
▪ Also industry experts from various industries interacted with students.
• Outcome:
• This in-house Internship programme helped students to have hands on experience of
electronic components and designing.
• Students have developed product according to problems.
• Students improved their logic building and programming skills in Arduino Uno.
• Students implemented small projects in Arduino Uno for Satellite Communication.
• Students designed template and cover page of department magazine.
• Certificate was given to 40 students out of 54 only who successfully completed the
assigned project during this internship
Prepared By:
SD/-
Checked By:
SD/-
Reviewed By:
SD/-
Approved By:
SD/-
Ms. Anvita Birje
Ms. Megha Gupta
Mr. NiketAmoda
Dr. VinitkumarDongre Dr. Lochan Jolly Dr. B.K.Mishra
(AP EXTC) (HOD EXTC) (Dean SSW) (Principal)