Q-Max Brochure

Q-MAXHIGH FLOW, LOW HEAD PUMPS

CORNELL PUMP COMPANY

EFFICIENT BY DESIGN

Q-MAX PUMPS

HEAVY-DUTY CENTRIFUGAL PUMPSAvailable in horizontal or vertical close-coupled and frame or engine mount configurations. Engineered for high flow/low-head applications, with renowned Cornell quality and durability.

Cornell redesigned some of our most popular clear liquids pumps, engineering them with single volutes. This makes the pumps lighter, and less expensive to produce while maintaining excellent hydraulic efficiencies and performance.

FEATURES AND BENEFITS The Q-Max line of pumps is designed with Cornell’s renowned quality and durability.

Competitive Pricing

Available in all mounting configurations (CC, Frame and SAE)

Packing or Cycloseal® mechanical seal

Back pullout construction

Cast iron construction with bronze wear rings

2 year warranty

20,000 hour minimum B-10 bearing life

ALL Q-MAX PUMPS INCLUDE: Standard iron construction w/ bronze shaft sleeve

Cast iron impeller

External Hydraulic Balance Line

Replaceable wear rings and shaft sleeve

High efficiency hydraulics

• HIGH FLOW• LOW HEAD• RELIABLE ENGINEERING• NEW DESIGN• HIGH EFFICIENCY

CYCLOSEAL® SYSTEM FOR GRIT REMOVALCYCLOSEAL is a self-contained single mechanical seal with a dished backplate. This configuration requires no external flushing and eliminates the need for a water flush line. The Cycloseal uses stationary deflector vanes cast into the dished pump backplate in conjunction with contoured impeller back vanes to create pressure gradients that moves solids and entrained vapor away from the seal faces. The Cycloseal system is only available on Cornell pump models.

�� No flush water required�� Removes grit from pump seal compartment �� Extends pump seal life three times standard mechanical�� No drips/mess at application site�� Reduced maintenance costs�� Increased uptime and reliability

Q-MAX PUMPS

0 50 100 150 200 250 300 350 400 450 500

0

5

10

15

20

25

30

35

TOTA

L D

YNA

MIC

HE

AD

0

10

20

30

40

50

60

70

80

90

100

110

120

CAPACITY0 250 500 750 1000 1250 1500 1750 2000 2250

Speed Impeller Dia. Style Solids Dia. Ns Suction Discharge No. Vanes

VARIOUS1775 RPM ENCLOSED .75" 2870 8" 5" 6

TYPE :CLEAR LIQUIDCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal. Other mounting styles orS.G. may require curve adjustments.

GPM

M3/HR

FEE

T

MET

ER

S

Volute

SINGLE

0002 10/22/15

04/03/15CTG MODEL : 5YBQ CURVE NO:

CTG

75%

5YBQ18

10 FT. (3.0 M)

10.12"-0°

30 HP

10.12"-10°

9.5"-10°

8.5"-10°

7.5"-10°

70%

70% 75%80%

80%

83%

83%

60%

85%

84%

84%

25 HP

20 HP

15 HP

9 FT. (2.7 M)

8 FT. (2.4 M)

12 FT. (3.7 M) NPSHR

0 50 100 150 200 250 300 350 400

0

5

10

15

20

25

30

35

TOTA

L D

YNA

MIC

HE

AD

0

10

20

30

40

50

60

70

80

90

100

110

120

CAPACITY0 200 400 600 800 1000 1200 1400 1600 1800


VARIOUS1770 RPM ENCLOSED .75" 3000 8" 5" 6

TYPE :CLEAR LIQUIDCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, close-coupled configuration.Other mounting styles or S.G. may require curve adjustments.

GPM

M3/HR

FEE

T

MET

ER

S

Volute

SINGLE

0002 10/29/15

04/03/15CTG MODEL : 5WBQ CURVE NO:

CTG 5WBQ18

8 FT. (2.4 M)

9.0" DIA 0°

15 HP

65%75%

75%

84%

65%

9.0" DIA 13°

8.5 DIA 13°

8.0 DIA 13°

7.5 DIA 13° 12 FT. (3.7 M)NPSHR

10 FT. (3.0 M)

20HP

10 HP

81%

81%

84%

0 250 500 750 1000 1250 1500 1750 2000

0

5

10

15

20

25

30

35

TOTA

L D

YNA

MIC

HE

AD

0

10

20

30

40

50

60

70

80

90

100

110

120

CAPACITY0 1000 2000 3000 4000 5000 6000 7000 8000 9000


VARIOUS1780 RPM ENCLOSED 1.38" 4800 10" 10" 5

TYPE :CLEAR LIQUIDSCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, close-coupled configuration.Other mounting styles or S.G. may require curve adjustments.

GPM

M3/HR

FEE

T

MET

ERS

Volute10YBQ 10YBSGL DBL

0001 10/29/15

10/30/07AE MODEL : 10YB/10YBQ CURVE NO:

GH

60%

10YB18

15 FT. (4.6 M)

11.5" @ 0°

75 HP

11.5" @ 17°

11.5" @ 22°

11.0" @ 22°

10.5" @ 22°

70%

77%

77%

80%

70%

60 HP

50 HP

17 FT. (5.2 M)

20 FT. (6.1 M) NPSHR


1775 VARIOUS ENCLOSED .75" 2790 10" 6" 6

TYPE : CLEAR LIQUIDCornell Pump Company • Clackamas, Oregon

Performances shown are for S.G. 1.0 60°F water, frame mounted configurationwith Cycloseal®.Other mounting stylesor S.G. may require curve adjustments.

0 100 200 300 400 500 600 700 800 900 1000

5

10

15

20

25

30

35

CAPACITY

TOTA

L D

YN

AM

IC H

EA

D

10

20

30

40

50

60

70

80

90

100

110

120

130

0 500 1000 1500 2000 2500 3000 3500 4000 4500 GPM

M3/HR

FEE

T

MET

ERS

40 HP

10 FT. (3.0M)

10.5" DIA 13°

11" DIA 0°

12 FT. (3.7 M)

60 HP

80%

30 HP

Volute

SINGLE

00- -

9/22/15- MODEL : 6YBQ CURVE NO:

JG

50 HP

84%

6YBQ18

86%

86%

84%

60%70%

10" DIA 13°

15 FT. (4.6M)

11" DIA 13°

9.5" DIA 13°

9" DIA 13°

80%

75%

75%18 FT. (5.5 M) NPSHR

HIGH QUALITY, HIGH EFFICIENCY CORNELL PRODUCT.

5WBQ• Flow rates from 540 to 1,800 GPM• Pressure from 11.5’ to 85’ (5 to 37 PSI)• 84% efficient at Best Efficiency Point• Dimensions are same as existing 5WBH pump

5YBQ• Flow rates from 520 to 1,850 GPM• Pressure from 21’ to 106’ (9 to 46 PSI)• 85% efficient at Best Efficiency Point• Dimensions are same as existing 5YBH pump

6YBQ• Flow rates from 1,000 to 2,750 GPM• Pressure from 21’ to 129’ (9 to 56 PSI)• 86% efficient at Best Efficiency Point• Dimensions are same as existing 6YB pump

10YBQ• Flow rates from 1,900 to 5,100 GPM• Pressure from 28’ to 115’ (12 to 50 PSI)• 80% efficient at Best Efficiency Point• Dimensions are same as existing 10YB pump

Cycloseal® and Redi-Prime® are Registered Trademarks of Cornell Pump Company.

Cornell pumps and products are the subject of one or more of the following U.S. and foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;

6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and foreign patent applications.

EFFICIENT BY DESIGN

SELF-PRIMING PUMPSCORNELL PUMP COMPANY

STX & STL SERIES

INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL® SYSTEM

FIVE-YEARWARRANTY

CORNELL SUBMERSIBLESCORNELL PUMP COMPANY

EFFICIENT BY DESIGNEFFICIENT BY DESIGN

EFFICIENT, RELIABLE, TROUBLE-FREE

EFFICIENT BY DESIGN

HYDRO TURBINECORNELL PUMP COMPANY

AGRICULTURECORNELL PUMP COMPANY

EFFICIENT BY DESIGN

INDUSTRIALCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

Immersible motors are designed to be used in dry-pit applications where there is a possibility of flooding. Why take a submersible motor that was designed to run submerged 100% of the time and modify it to run in air 99% (or most of the time) and submerged 1% of the time (in case of a flood)? This seems backwards. The correct approach is to take a TEFC motor that is designed to run in air 100% of the time and adapt it to run submerged 1% of the time (in case of a flood).

IMMERSIBLE MOTOR BASIC DESIGN:The basic design of the immersible pump/motor incorporates a premium efficient, inverter duty, P-Base or C-Face TEBC motor (totally enclosed, blower cooled). The motor, as the name implies, is totally enclosed and cooled by a blower on top of the motor. If the motor becomes submerged, the blower motor fan shuts down without affecting the main motor. While the motor is temporarily submerged, the media cools the motor just like a true submersible. A special conduit box is used to prevent water leakage into the motor. The motor is designed to prevent infiltration of water along the shaft and into the motor by utilizing a triple redundant sealing system, including a patented hydroseal design. The motor-end bell housing incorporates the ‘inverted cup’ principle, which traps an air bubble under the motor as water rises, thus keeping water away from the shaft seal. The shaft is fitted with a hydroseal, which expells water and further reduces the chance of water reaching the shaft seals.

The Immersible motor can withstand up to 30 feet of submergence depth for a two-week period. This exceeds the requirements of Immersible motors that is described in the industry standard “Index of

Protection” IP67. Competitive designs only allow immersion of the motor for a period of time not exceeding 30 minutes at a submergence level of 3 ‘. Hardly enough time to deal with any kind of flooding emergency!

THE IMMERSIBLE MOTOR CONCEPT:

CORNELL PUMP COMPANY // 16261 SE 130th AVE CLACKAMAS, OR2013 © ALL RIGHTS RESERVED

IMMERSIBLECORNELL PUMP COMPANY

FOOD PROCESSCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

WATER TRANSFERCORNELL PUMP COMPANY

HYDRAULIC FRACTURING

EFFICIENT BY DESIGN

REDI-PRIME PUMPSBOMBAS DE CEBADO ASISTIDO REDI-PRIME®


Cornell Pump Company16261 SE 130th AveClackamas, OR 97015P: (503) 653-0330F: (503) 653-0338

Efficient by Design

CORNELLPUMP.COM©2011 CORNELL PUMP COMPANY

LÍNEA DE PRODUCTOS DE CORNELL

Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.

Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;

6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.

*To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:

Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.

Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.

self-priming

refrigeration municipal food process industrial

submersible hydro-turbine agricultureTHE CORNELL PRODUCT LINE

MINE DEWATERINGCORNELL PUMP COMPANY

WHEN RELIABILITY MATTERS

BOMBAS AUTOCEBANTES BOMBAS SUMERGIBLES TURBINAS BOMBAS PARA AGRICULTURA Y RIEGO

BOMBAS PARA REFRIGERACIÓN

BOMBAS DE CEBADO ASISTIDO

BOMBAS PARA ELSECTOR PÚBLICO

DESAGÜES EN MINERÍA

TRANSPORTE HIDRÁULICODE ALIMENTOS

CORPORATIVO

BOMBAS PARA EL SECTOR INDUSTRIAL

MOTORES INMERSIBLES

CUANDO LA FIABILIDAD ES LO QUE IMPORTA

MUNICIPALITIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MINING

EFFICIENT BY DESIGN


EFFICIENT BY DESIGN

CUTTER PUMPS

EFFICIENT BY DESIGN


CHOPPERCORNELL PUMP COMPANY

EFFICIENT BY DESIGNEFFICIENT BY DESIGNEFFICIENT BY DESIGN

END GUNBOOSTER PUMP


EFFICIENT BY DESIGN

FOR CENTER PIVOT IRRIGATION

HYDRAULIC SUBSCORNELL PUMP COMPANY

• Models Available - 4NNT, 6NNT, 8NNT, etc.• Discharge Sizes Available - 4 to 8 inch• Standard Construction - Cast Iron, Class 30• Optional Construction - 316SS, CD4MCU, Ductile Iron• Permco hydraulic drive

• Various adaptor plates available for hydraulic motor fit• Heavy duty shaft / bearing frame assembly• Heavy duty “wet end” construction• Manufactured in the United States

• Premium Hydraulic Efficiencies, 76 to 80% BEP• 3 inch or larger solid handling capability• Total Dynamic Head: 50 to 360 feet• Capacity: 200 to 7000 GPM

• General Agriculture, Industrial and Municipal Applications• Rental Applications• Mining Applications• Flood Control Applications• Construction / Dewatering Applications

STANDARD SPECIFICATIONS

FEATURES AND BENEFITS

PERFORMANCE CHARACTERISTICS

TYPICAL MARKETS

EFFICIENT BY DESIGN

MANURE PUMPSCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MP SERIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MINING PUMPS DESIGNED FOR COARSE ABRASIVES

MX SERIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

MX SERIESCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

HIGH HEAD MINING PUMPS

SLURRY PUMPS

SLURRY PUMPSCORNELL PUMP COMPANY

CURVES

EFFICIENT BY DESIGN

SELF PRIMING SUBMERSIBLE

HYDRO TURBINE

AGRICULTURAL REFRIGERATIONMUNICIPALMINE DEWATERINGFOOD PROCESS

CUTTERCHOPPER EDGE™ HYDRAULIC SUBS MANURE MP SERIES

MX SERIES MX MINING REDI-PRIME® SLURRY

INDUSTRIAL

IMMERSIBLE

REFRIGERATIONCORNELL PUMP COMPANY

EFFICIENT BY DESIGN

WATER TRANSFER

CORNELLPUMP.COM©2015 CORNELL PUMP COMPANY

MARKET AND PRODUCT LINEOIL & GAS


EFFICIENT BY DESIGN

OIL & GAS

AUTHORIZED CORNELL PUMP DISTRIBUTOR

Cornell Pump CompanyClackamas, Oregon, USA

P: +1 (503) 653-0330F: +1 (503) 653-0338

EFFICIENT BY DESIGN

V-SERIES PUMPSCORNELL PUMP COMPANY

FOR MEDIUM DUTY APPLICATIONS

V SERIES

CYCLOSEAL®CORNELL PUMP COMPANY

PATENTED LONG LASTING, LEAK-FREE FLUSHLESS SEALING SYSTEM

EFFICIENT BY DESIGN

Celebrating

20YEARS

1994-2014SYSTEMSYSTEM

CYCLOSEALCYCLOSEAL

CYCLOSEAL®

Q-Max Brochure

Documents

Transcript of Q-Max Brochure