PROFESSIONAL SAFETY SOLUTIONS - Shipserv Ltd

PROFESSIONAL SAFETY SOLUTIONSGas Detection

Alcohol & Drug Detection

Respiratory Protection

Breathing Protection

Chemical Protection

Temperature & Pressure Calibrator

Safety Approved FlashLights

Repair & Calibration

www.finecomese.com

PROFESSIONAL SAFETY SOLUTIONS

Gas Detection

Alcohol & Drug Detection

Respiratory Protection

Breathing Protection

Chemical Protection

Temperature & Pressure Calibrator

Safety Approved FlashLights

Repair & Calibration

Shipping &

Shipbuilding

Fire & Rescue

| 사업 역

Chemical,

Refining, Oil & Gas

Pharmaceutical

Mining

Government & Institute

Semiconductor &

Electronics

■ Portable Gas Detector ■Toxic Gas Detection Tube

Draeger Accuro Pump 06

Draeger Detector Tubes 06

Draeger Chip-Measurement-System (CMS) 06

Draeger Short-Term Detection Tubes 07

Single Gas Detector

Draeger Pac 3500/5500/7000 11

MiniMax RXT/XP 11

GasAlertClip Extreme/GasAlert Extreme 11

Mulit Gas Detector

Draeger X-am 2000 12

MiniMax X4 12

Draeger X-am 5000/5600 12

Draeger X-am 7000 13

Impact / Impact Pro 13

GasAlert Quattro 14

GasAlertMicro Clip XT 14

GasAlertMax XT II 14

GasAlertMicro 5 15

Draeger X-zone 5000 15

■ Fixed Gas Detection ■Gas Detector

Draeger Polytron 3000 16



Draeger PIR 3000 17

Draeger PIR 7000 17

Draeger PEX 3000 18

Draeger Polytron SE Ex 18

Draeger Polytron 2 XP Ex 19

Draeger Polytron FX 19

Draeger Polytron 2 XP Tox 20

Honeywell Sensepoint XCD 20

Honeywell Series 3000 MKII Transmitter 20

Honeywell Apex Transmitter 21

Honeywell Searchpoint Optima Plus Point Infrared Gas Detector 21

Control Unit

Draeger Regard 1 22

Draeger QuadGard 22

Honeywell TouchPoint 22

■ Calibration gas ■Cal Gaz Calibration gases 23

■ Alcohol & Drug Test Kit ■Draeger Alcotest 6510 / 6810 24

AlcoHawk ABI 24

AL 6000 24

AL 9000 25

Breath Alcohol Measurement with Draeger Alcotest-Tubes 25

Draeger DrugCheck 25

■ Flow Check(Smoke Generator) ■Draeger Air Flow Tester 26

Draeger Flow check 26

■ Air Purifying Respirator ■Half Mask

Draeger X-ploreⓇ 3300 27


Draeger X-ploreⓇ Bayonet Filter 27

Full Face Mask




Draeger X-ploreⓇ Rd40 Filters 28

■ Escape Device ■Escape Emergency Breathing Devices(EEBD)

Draeger Saver CF series 29

Filter Escape Apparatus

Draeger ParatⓇ C 29

Draeger ParatⓇ 4500 30

Draeger ParatⓇ 3000 series 30

■ Breathing Apparatus ■Self-Contained Breathing Apparatus(SCBA)

Draeger PASⓇ Lite 31

Draeger PSSⓇ 3000 31



SCBA Face Mask

Draeger FPSⓇ 7000 33

Draeger Panorama NovaⓇ 33

BA Cylinder

Draeger Compressed Air Cylinder 34

Closed Circuit Breathing Apparatus

Draeger PSS BG4 Plus 34

[ 5 ]

■ Compressor ■Draeger DE 100 35

Draeger Junior II 35

Draeger Mariner 35

Draeger Verticus 35

■ Compressed Air Quality Test Kit ■Draeger Aerotest Simultan HP 36

Draeger Aerotest Alpha 36

Draeger Aerotest Navy 36

■ Chemical Protection Suit ■Draeger CPS 5800 37

Draeger CPS 5900 37

Draeger CPS 7900 37

Draeger SPC 3800 37

SAINT-GOBAIN ONESuitⓇ Flash 38

SAINT-GOBAIN ONESuitⓇ Gard 38

SAINT-GOBAIN ONESuitⓇ Pro 38

SAINT-GOBAIN ONESuitⓇ Shield 39

Kappler Zytron 500 39

Kappler Zytron Chemical suits 39

■ Safety Helmet ■Draeger HPS 3100 40

Draeger HPS 6200 40

■ Calibrator ■Temperature Calibrator

Temperature Dry Block Calibrator 41

Sub-Zero Low Temperature Dry block Calibrator 41

Pneumatic & Hydraulic Pressure Calibrator

Pressure Calibrator 42

■ Safety Approved Flashlights ■Pocket Sabre 1820 43

L4 1830 LED 43

MityLite 1900 43

SabreLite 2000 43

SabreLite 2010 Recoil LED 44

StealthLite 2400 44

StealthLite 2410 Recoil LED 44

StealthLite Rechargeable 2460 44

HeadUp Lite 2600 45

HeadUp Lite 2610 LED 45

HeadUp Lite 2640 45

HeadUp Lite 2690 LED 45

Little Ed 3610 Recoil LED 46

Little Ed Rechargeable 3660 Recoil LED 46

Big Ed Rechargeable 3750 46

KingLite 4000 46

M10 8040 47

WorkSafe 2117/2217 47

WorkSafe 2124/2224 47

WorkSafe 2206 47

Responder 48

LightHawk 48

■ Camera ■Intrinsically Safe Camera

iCam 501 49

Thermal Imaging Camera

Draeger UCF 6000/7000 49

■ Fire Detector Tester■Smoke Detector Tester 50

Heat Detector Tester 50

Flame Detector Tester 50

■ Repair & Service ■ 51

Professional Safety Solutions

CONTENTS

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor

Portable Gas DetectorProfessional Safety Solutions

Toxic Gas Detection Tube

[ 6 ]

Application For short-term measurements

with a small number of strokes

Design Bellow pump worked by hand

Single-handed operation

Number of strokes 1-50 and higher

Stroke Volume 100mL (±5%)

Size ( H×W×D) 85×170×45mm

Size 205 x 92 x 45mm

Weight 730g

Data Capacity Stores up to 50 measurements

Ingress Protection (IP) IP-54

Power Supply 4 x 1.5Volt (AA) alkaline batteries

Operation Temp. 0 to 40'C

Approval UL, CSA, MSHA

The Draeger accuro gas detector pump allows you to use triedand tested Draeger tubes to take measurements underextreme conditions.

Draeger Accuro Pump

More than 200 different Draeger tubes are available toaccurately make spot measurements for over 500 gases andvapours

Draeger Detector Tubes

The Draeger CMS is one of the most accurate and reliableportable detection systems currently available for spot gasmeasurements. It combined substance specific measuringChips with and electronic based Analyzer for an easy to usespot-measurement system.

Draeger Chip-Measurement-System (CMS)

•Glass Vial ( 120 x 7mm)

•Filled with a chemical Reagents

•Air is pulled through with a hand operated pump

•The reagents change color if the targeted chemical is present

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor

[ 7 ]

Acetaldehyde 100/a 100-1,000 ppm 67 26 665

Acetic Acid 5/a 5-80 ppm 67 22 101

Acetone 40/a 40-800 ppm 81 03 381

Acetone 100/b 100-12,000 ppm CH 22 901

Acid Test Qualitative 81 01 121

Acrylonitrile 0.5/a (5) 0.5-20 ppm 67 28 591

Air Current Tube Kit 40 54 388

Air Current Tubes CH 25 301

Alcohol 25/a 50-4,000 ppm Isopropanol 81 01 631

25-5,000 ppm Methanol

Alcohol 100/a 100-3,000 ppm CH 29 701

Amine Test Qualitative 81 01 061

Ammonia 0.25/a 0.25-3 ppm 81 01 711

Ammonia 2/a 2-30 ppm 67 33 231

Ammonia 5/b 2.5-100 ppm 81 01 941

Ammonia 5/a 5-700 ppm CH 20 501

Ammonia 0.5%/a 0.05-10 Vol.% CH 31 901

Aniline 0.5/a 0.5-10 ppm 67 33 171

Aniline 5/a 1-20 ppm CH 20 401

Arsine 0.05/a 0.05-60 ppm CH 25 001

Benzene 0.5/a 0.5-10 ppm 67 28 561

Benzene 0.5/c (5) specific 0.5-10 ppm 81 01 841

Benzene 2/a (5) 2-60 ppm 81 01 231

Benzene 5/b 5-50 ppm 67 28 071

Benzene 15/a 15-420 ppm 81 01 741

Carbon Dioxide 100/a 100-3,000 ppm 81 01 811

Carbon Dioxide 0.1%/a 0.1-6 Vol.% CH 23 501

Carbon Dioxide 0.5%/a 0.5-10 Vol.% CH 31 401

Carbon Dioxide 1%/a 1-20 Vol.% CH 25 101

Carbon Dioxide 5%/A 5-60 Vol.% CH 20 301

Carbon Disulfide 3/a 3-95 ppm 81 01 891

Carbon Disulfide 30/a 32-3,200 ppm CH 23 201

Carbon Monoxide 2/a 2-300 ppm 67 33 051

Carbon Monoxide 5/c 5-700 ppm CH 25 601

Carbon Monoxide 8/a 8-150 ppm CH 19 701

(only for CO in H2)

Carbon Monoxide 10/b 10-3,000 ppm CH 20 601

Carbon Monoxide 10/d 10-3,000 ppm 81 03 321

Carbon Monoxide 0.3%/b 0.3-7 Vol.% CH 29 901

Carbon Pretubes CH 24 101

Carbon Tetrachloride 0.1/a 0.1-5 ppm 81 03 501

Carbon Tetrachloride 1/a (5) 1-15 ppm 81 01 021

Carbon Tetrachloride 5/c 5-50 ppm CH 27 401

Chlorine 0.2/a 0.2-30 ppm CH 24 301

Chlorine 0.3/b 0.3-10 ppm 67 28 411

Chlorine 50/a 50-500 ppm CH 20 701

Chlorine Dioxide 0.025/a 0.025-3 ppm 81 03 491

Draeger-TubeⓇ Measuring Range Part No. Draeger-TubeⓇ Measuring Range Part No.

Draeger Short-Term Detection Tubes

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor



[ 8 ]

Chlorobenzene 5/a (5) 5-200 ppm 67 28 761

Chloroform 2/a (5) 2-10 ppm 67 28 861

Chloroformates 0.2/b 0.2-10 ppm 67 18 601

Chloropicrin 0.1/a 0.1-2 ppm 81 03 421

Chloroprene 5/a 5-60 ppm 67 18 901

Chromic Acid 0.1/a (9) 0.1-0.5 mg/m3 67 28 681

Cyanide 2/a 2-15 mg/m3 67 28 791

Cyanogen Chloride 0.25/a 0.25-5 ppm CH 19 801

Cyclohexane 100/a 100-1,500 ppm 67 25 201

Cyclohexylamine 2/a 2-30 ppm 67 28 931

Dichloropropene 0.1/a 0.1-10 ppm 81 03 551

Diesel Fuel 25-200 mg/m3 81 03 475

Diethyl Ether 100/a 100-4,000 ppm 67 30 501

Dimethyl Formamide 10/b 10-40 ppm 67 18 501

Dimethyl Sulfate 0.005/c (9) 0.005-0.05 ppm 67 18 701

Dimethyl Sulfide 1/a (5) 1-15 ppm 67 28 451

Epichlorohydrin 5/c 5-80 ppm 67 28 111

Ethyl Acetate 200/a 200-3,000 ppm CH 20 201

Ethyl Benzene 30/a 30-600 ppm 67 28 381

Ethylene 0.1/a (5) 0.2-5 ppm 81 01 331

Ethylene 50/a 50-2,500 ppm 67 28 051

Ethylene Glycol 10 (5) 10-180 mg/m3 81 01 351

Ethylene Oxide 1/a (5) 1-15 ppm 67 28 961

Ethylene Oxide 25/a 25-500 ppm 67 28 241

Ethyl Formate 20/a 20-500 ppm 81 03 541

Ethyl Glycol Acetate 50/a 50-700 ppm 67 26 801

Fluorine 0.1/a 0.1-2 ppm 81 01 491

Formaldehyde 0.2/a 0.2-5 ppm 67 33 081

Formaldehyde Activation extend to 0.04 ppm 81 01 141

tube (for use only in

conjunction with 0.2/a tube)

Formaldehyde 2/a 2-40 ppm 81 01 751

Formic Acid 1/a 1-15 ppm 67 22 701

Halogenated Hydrocarbons 100-2,800 ppm 81 01 601

100/a

Hexane 100/a 50-3,000 ppm 67 28 391

Hydrazine 0.01/a 0.01-6 ppm 81 03 351

Hydrazine 0.25/a 0.1-10 ppm CH 31 801

Hydrocarbons 0.1%/c 0.1-1.3 Vol. % 81 03 571

Hydrocarbons 2/a 2-24 mg/l 81 03 581

Hydrochloric Acid 0.2/a 0.2-20 ppm 81 03 481

Hydrochloric Acid 1/a 1-10 ppm CH 29 501

Hydrochloric Acid 50/a 50-5,000 ppm 67 28 181

Hydrochloric Acid/Nitric 1-10 ppm (HCL) 81 01 681

Acid 1/a 1-15 ppm (HNO3)

Hydrocyanic Acid 2/a 2-150 ppm CH 25 701

Hydrogen 0.2%/a 0.2-2 Vol. % 81 01 511


|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor

[ 9 ]

Hydrogen Fluoride 0.5/a 0.5-90 ppm 81 03 251

Hydrogen Peroxide 0.1/a 0.1-3 ppm 81 01 041

Hydrogen Sulfide 0.2/a 0.2-5 ppm 81 01 461

Hydrogen Sulfide 0.2/b 0.2-6 ppm 81 01 991

Hydrogen Sulfide 0.5/a 0.5-15 ppm 67 28 041

Hydrogen Sulfide 1/d 1-200 ppm 81 01 831

Hydrogen Sulfide 2/a 2-200 ppm 67 28 821

Hydrogen Sulfide 2/b 1-60 ppm 81 01 961

Hydrogen Sulfide 5/b 5-600 ppm CH 29 801

Hydrogen Sulfide 100/a 100-2,000 ppm CH 29 101

Hydrogen Sulfide 0.2%/A 0.2-7 Vol. % CH 28 101

Hydrogen Sulfide 2%/a 2-40 Vol. % 81 01 211

Hydrogen Sulfide + 0.02-7 Vol. % CH 28 201

Sulfur Dioxide 0.2%/A

Iodine 0.1/a 0.1-6 ppm 81 03 521

Mercaptan 0.1/a 0.1-2.5 ppm 81 03 281

Mercaptan 0.5/a 0.5-5 ppm 67 28 981

Mercaptan 20/a 20-100 ppm 81 01 871

Mercury Vapor 0.1/b 0.05-2 mg/m3 CH 23 101

Methyl Acrylate 5/a 5-200 ppm 67 28 161

Methyl Bromide 0.2/a 0.2-8 ppm 81 03 391

Methyl Bromide 0.5/a 0.5-30 ppm 81 01 671

Methyl Bromide 5/b 5-50 ppm CH 27 301

Methylisothiocyanate 0.1/a 0.1-6 ppm 81 03 485

Methylene Chloride 100/a 100-2,000 ppm 67 24 601

Natural Gas Test (Methane)(5) Qualitative CH 20 001

Nickel Tetracarbonyl 0.1/a (9) 0.1-1 ppm CH 19 501

Nitric Acid 1/a 1-50 ppm 67 28 311

Nitrogen Dioxide 0.5/c 0.5-25 ppm CH 30 001

Nitrogen Dioxide 2/c 2-100 ppm 67 19 101

Nitrous Fumes 0.5/a 0.5-10 ppm CH 29 401

Nitrous Fumes 2/a 2-100 ppm CH 31 001

Nitrous Fumes 20/a 20-500 ppm 67 24 001

Nitrous Fumes 50/a 50-2,000 ppm 81 01 921

Nitrous Fumes 100/c 100-5,000 ppm CH 27 701

Oil Mist 1/a 1-10 mg/m3 67 33 031

Olefins 0.05%/a 0.06-3.2 Vol.% Propylene CH 31 201

0.04-2.4 Vol.% Butylene

Organic Arsenic 3 mg org. arsenic/m3 CH 26 303

Compounds and Arsine

Organic Basic Nitrogen 1 mg/m3 CH 25 903

Compounds

Oxygen 5%/C 5-23 Vol. % 81 03 261

Ozone 0.05/b 0.05-1.4 ppm 67 33 181

Ozone 10/a 10-300 ppm CH 21 001

Pentane 100/a 100-1,500 ppm 67 24 701

Perchloroethylene 0.1/a 0.1-4 ppm 81 01 551



|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor



[ 10 ]


Perchloroethylene 2/a 2-300 ppm 81 01 501

Perchloroethylene 10/b 10-500 ppm CH 30 701

Petroleum Hydrocarbons 10/a 10-300 ppm (n-Octane) 81 01 691

Petroleum Hydrocarbons 100/a 100-2,500 ppm (n-Octane) 67 30 201

Phenol 1/b 1-20 ppm 81 01 641

Phosgene 0.02/a 0.02-1 ppm 81 01 521

Phosgene 0.25/c 0.25-15 ppm CH 28 301

Phosphine 0.01/a 0.01-1 ppm 81 01 611

Phosphine 0.1/a 0.1-4 ppm CH 31 101

Phosphine 0.1/b in acetylene 0.1-15 ppm 81 03 341

Phosphine 1/a 1-100 ppm 81 01 801

Phosphine 25/a 25-10,000 ppm 81 01 621

Phosphine 50/a 15-1,000 ppm CH 21 201

Phosphoric Acid Esters 0.05/a 0.05 ppm 67 28 461

Dimethyldichlorovinylphosphate

Polytest Qualitative CH 28 401

Pyridine 5/A 5 ppm 67 28 651

Styrene 10/a 10-200 ppm 67 23 301

Styrene 10/b 10-250 ppm 67 33 141

Styrene 50/a 50-400 ppm CH 27 601

Sulfur Dioxide 0.1/a 0.1-3 ppm 67 27 101

Sulfur Dioxide 0.5/a 0.5-25 ppm 67 28 491

Sulfur Dioxide 1/a 1-25 ppm CH 31 701

Sulfur Dioxide 20/a 20-2,000 ppm CH 24 201

Sulfur Dioxide 50/b 50-8,000 ppm 81 01 531

Sulfuric Acid 1/a (9) 1-5 mg/m3 67 28 781

Sulfuryl Fluoride 1/a (5) 1-5 ppm 81 03 471

Tetrahydrothiophene 1/b (5) 1-10 ppm 81 01 341

Thioether 1 mg/m3 CH 25 803

Toluene 5/b 5-300 ppm 81 01 661

Toluene 50a 50-400 ppm 81 01 701

Toluene 100/a 100-1,800 ppm 81 01 731

Toluene Diisocyanate 0.02/A (9) 0.02-0.2 ppm 67 24 501

Trichloroethane 50/d (5) 50-600 ppm CH 21 101

Trichloroethylene 2/a 2-250 ppm 67 28 541

Trichloroethylene 50/a 50-2,000 ppm 81 01 701

Triethylamine 5/a 5-60 ppm 67 18 401

Vinyl Chloride 0.5/b 0.5-30 ppm 81 01 721

Vinyl Chloride 100/a 100-3,000 ppm CH 19 601

Water Vapor 0.1/a 0.05-1 mg/L 81 01 321

Water Vapor 1/b 1-40 mg/L 81 01 781

Water Vapor 3/a 3-60 lbs/mcf 81 03 031

Xylene 10/a 10-400 ppm 67 33 161


|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor

[ 11 ]

Pac 3500 Pac 5500 Pac 7000

Life Time 2 years (730 days) 5 years No life time limitation

Measurement O2, CO, H2S O2, CO, H2S O2, CO, H2S, CO2, Cl2, HCN, NH3, NO2, PH3, SO2, OV,NO

Dimensions (W×H×D) 84×64×25mm

Weight 120g

Ingress Protection IP 65

Battery life 8 hours of use per day, 1 minute alarm per day CO, H2S : ＞2 years O2 : ＞12 months

Alarms Visual, audible, vibrating

Guaranty 2 years

Event logger Storage of up to 60 events including concentration levels, date and time

Approval CE-Sign, ATEX, UL, IECEx

MiniMax RXT MiniMax XP

Life Time 2 years after activation No life time limitation

Measurement O2, CO, H2S O2, CO, H2S, SO2, Cl2

HCN, NH3, H2

Dimensions (W×H×D) 93×50×27mm

Weight 81.5g (Toxic), 93g (O2)


Battery life 3 years


Guaranty 2 years

Approval UL/Cul, ATEX

GasAlertClip Extreme GasAlert Extreme

Life Time 2 years after activation No life time limitation

Measurement O2, CO, H2S, SO2 O2, CO, H2S, SO2,

HCN, NH3, Cl2, NO,

NO2, PH3, ETO, O3

Dimensions (W×H×D) 28×50×81mm 28×50×95mm

Weight 76g 82g

Ingress Protection IP 66/67

Battery life 2 years


Guaranty 2 years

Approval UL, ATEX, IECEx, CE

MiniMax RXT / XP GasAlertClip Extreme / GasAlert Extreme

Draeger Pac 3500 / 5500 / 7000

Portable Gas DetectionProfessional Safety Solutions

Single Gas Detector

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor


Multi Gas Detector

[ 12 ]

X-am 5000 X-am 5600

Dimension 47×130 ×44mm

Weight 220-250g

Measurement Up to 5 gases Up to 6 gases

Flammable(Cat Ex/IR Ex), O2, CO, H2S, NO, NO2,

SO2, PH3, HCN, NH3, CO2, OV, OV-A, H2


Alarms Visual, audible, Vibrating

Battery life ＞12 hours

Charging Time ＜4 hours

Data logger Can be read out via Infrared ＞1000 hours with 5-6

gases and a recording interval of 1 value per minute

Approval ATEX, UL, CSA, IECEx, CE, MED, MSHA, MED

The X-am 5000 / 5600 is thesmallest gas detectioninstrument for 1-6 gasesmonitoring

Draeger X-am 5000 / 5600

Dimension 48×130×44mm

Weight 220-250g

Measurement Flammable, O2, CO, H2S



Battery life ＞12 hours

Charging Time ＜4 hours

Data logger Can be read out via Infrared

＞1000 hours with 4 sensors and a recording interval of 1 value per minute

Approval ATEX, UL, CSA, IECEx, CE, MED, MSHA

The Draeger X-am 2000 has been specially designed for personal multi gas monitors.Unlimited 1-4 gas instrument with exchangeable sensors

Draeger X-am 2000


Weight 210g

Measurement 0-100%LEL Flammable

0-30% O2

0-999 ppm CO

0-250 ppm H2S



Battery life 14-16 hours

Guaranty 2 years

Approval UL, ATEX, CSA, SAA

MiniMax X4

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor

[ 13 ]


Weight Instrument : 600g

Rechargeable battery : 490-730g

Measurement Up to 5 gases

Flammable (Cat Ex/ IR Ex), O2, CO, H2S, CO2, HCN, NH3, PH3, SO2, OV, OV-A, NO



Battery life Alkaline ＞20 hours

NiMH ＞ 9 hours

Charging Time 3.5 to 7 hours, depending on battery type

Pump mode Maximum length of tubing 45m

Approval ATEX, MED, UL, CSA, IECEx, CE


Weight 520g

Measurement Flammable, O2, CO, H2S, NH3, CO2

(Up to 2-4 gases) SO2, Cl2, NO2



Battery life Alkaline ＞17 hours

NiMH ＞10 hours

Pump mode Maximum length of tubing 25m

Approval UL, ATEX, CAS, SAA

Impact / Impact Pro

The Draeger X-am 7000 is the innovative solution for thesimultaneous detection of up to 5 gases.

Draeger X-am 7000

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor


Multi Gas Detector

[ 14 ]


Weight 171g


0-30% O2

0-500 ppm CO

0-100 ppm H2S

Ingress Protection IP 66/IP 67


Battery life 10 hours : recharges in less than 4 hours.

Guaranty 2 years

Approval ATEX, IECEx, SA, CE


Weight 328g


0-30% O2

0-1000 ppm CO

0-200 ppm H2S



Battery life 13 hours

Guaranty 2 years


The slim and compactGasAlertMicro Clip XT IIprovides affordable protectionform atmospheric hazards.

GasAlertMicro Clip XT

GasAlertMax XT II reliablymonitors up to four hazardsand combines straghtforwardone-button operation with ourrobust, motorized pump forintelligent, remote sampling,ideal for confined spaces.

GasAlertMax XT II


Weight 316-338g


0-30% O2

0-1000 ppm CO

0-200 ppm H2S



Battery life AA alkaline ＞ 14 hours

Rechargeable ＞ 18 hours

Guaranty 2 years

Approval SA, ATEX, IECEx

GasAlert Quattro

|G

as D

ete

ction

: Porta

ble

Gas D

ete

ctor

[ 15 ]


Weight 370g

Measurement PID(VOCs), IR (CO2), Flammable

O2, CO, H2S, SO2, PH3, NH3, NO2, Cl2, ClO2, O3



Pump Sample from up to 20m

Guaranty 2 years


Simultaneously monitor and display up to five atmospheric hazards with the GasAlertMicro5 Series. Adaptable to variety of applications, the GasAlertMicro 5 Series has an extensiveselection of user-settable filed options and is available as either a standard toxic gas model,a PID model for the detection VOCs, or IR model for CO2 detection.

GasAlertMicro 5


Weight 7 -10kg


Alarms Visual, audible

Live signal Green status display(360'c), illuminated ring(LED)

Operating time Approx. 60h

Pump operation Maximum length of tubing 45m

Radio transmission Worldwide license-free ISM frequencies

Digital radio, robust and

interference-free transmission up to 100m

Approval ATEX, IEC, SA

The Draeger X-zone 5000 transforms the Draeger personal gas detection instruments X-am5000 into innovative area monitoring devices for a wide range of applications. Up to 25Draeger X-zones can be automatically interconnected to form a wireless fenceline.

Draeger X-Zone 5000

|G

as D

ete

ction

: Fixe

d G

as D

ete

ction

Fixed Gas DetectionProfessional Safety Solutions

Gas Detector

[ 16 ]

Type Intrinsically safe transmitter for electrochemical sensors

Gases and Range Toxic gases and Oxygen in various ranges

Display Large graphic display, 34 ×62mm Menu structure and messages in real text, 3 button navigation

Signal Output Analog 4 to 20mA

Maintenance 3.4 Ma constant

Fault ＜3.2 Ma

Power Supply 12 to 30 VDC, 2-wire

Ambient Conditions Temperature : -40 to +65℃, Pressure : 700 to 1300hPa, Humidity : 0 to 100%RH, non condensing

Enclosure IP 66/67, NEMA 4, GRP housing, M20 cable gland

Dimensions (H ×W ×D) 166×135×129mm

Weight (Approx) 900g / 2 lbs

Approvals ATEX, IEC, UL, CSA, CE-mark

Type Intrinsically safe transmitter for electrochemical sensors

Gases and Range Toxic gases and Oxygen, ranges user adjustable,

see sensor data sheet

Display Large graphic display, 34 ×62mm, Menu structure and

messages in real text, 3 button navigation


Warning every 10s for 1s

Maintenance 3.4mA constant or 4 Ma ±1mA, 1 Hz modulation

Fault < 3.2 MaPower Supply 16.5 to 30VDC 2-wire, 3-wire for Pump module

and relay module

Pump Module Tubing up to 30m @0.5l/min with 4mm inner diameter

Relay Module Two alarm relats, one fault relay, SPDT, user programmable

Ambient Temperature -40 to +65°

Conditions Pressure 700 to 1300hPa

Humidity 0 to 100%RH, non condensing

Enclosure GRP, IP 66/67, NEMA 4, M20 cable gland

Dimensions 166×135×129mm

Weight (Approx) 900g / 2 lbs

SIL Level SIL 2 verified


Type Microprocessor-controlled transmitter with pump and oven

Gases and Range Nitrogen trifluoride NF3 CAS 7783-54-2 0 to 50ppm

Octafluorocyclopentene C5F8 CAS 559-40-0 0 to 30ppm

Hexafluorobutadiene C4F6 CAS 685-63-2 0 to 30ppm

Output Analog 4 to 20mA, digital HART

optional digital LON

Power Supply 24 VDC±10%; 1.5A

Ambient Conditions Temperature 0 to 40℃Humidity transmitte 0 to 99 %RH, non-condensing

Humidity sample gas 20 to 90%RH

Enclosure IP 21

Enclosure IP 65/66, glasfiber reinforced polyester


Weight (Approx) 2.4 kg / 5.2 lbs

Approvals CE mark electromagnetic compatibility

The Draeger Polytron 7000 is anintrinsically safe gas detector for thecontinuous monitoring of toxic gasesand oxygen. With its unique modulardesign and total flexibility: TheDraeger Polytron 7000 is a trulyuniversal transmitter that can satisfyall toxic and oxygen measurementapplications on a single platform.SIL 2 Approval guarantees nounrevealed failures.

Draeger Polytron 7000

The Dreager Polytron 7500 is apyrolysing gas detector for thecontinuous monitoring of toxicgases such as NF3 andperfluorinated C4F6 and C5F8 inthe ambient air. The devicecontains all necessary functionssuch as sampling, processing andanalysis in one enclosure.


The Draeger Polytron 3000 is an intrinsically safe gas detector for the continuous monitoringof toxic gases and oxygen. High measuring accuracy alongside simple mounting and very easyoperation. The Polytron 3000 is ideally suited to the measuring of toxic gases and oxygen in awide range of applications.


|G

as D

ete

ction

: Fixe

d G

as D

ete

ction

[ 17 ]

Type Explosion proof gas transmitter with infrared sensor technology

Working principle Temperature-compensated infrared absorption

Gases and Range Methane, propane, ethylene : 0 to 100 %LEL

Measuring performance Digital resolution 0.5 %LEL

(metnane) Repeatability ≤±2 %LEL

Response time T0...90 ≤30 sec (with splash guard and calibration adapter)

Electrical data Output signals 4 to 20mA

Fault signal 1 mA

Power supply 10 to 30 VDC

Power consumption ≤2 W

Ambient Conditions Temperature : -40 to +65℃, Pressure : 700 to 1300hPa, Humidity : 0 to 100%RH

Enclosure IP65, IP 66/67, M25 or 3/4" NPT Dimensions 170mm ×￠37mm

Weight (Approx) 550 g Approvals ATEX, IEC, UL, CSA, CE-mark


Principle of operation Temperature-compensated infrared absorption, 4-beam technology

Gases and Range Methane, propane, ethylene 0 to 20...100 %LEL

Measuring performance Digital resolution 0.5 %LEL

(type 334,metnane) Repeatability ≤±1 %LEL

Response time T0...90 ≤4 sec (normal response), ＜1 sec (fast response)

Electrical data Output signals 4 to 20mA , HART

Fault signal ≤1.2 mA

Beam block warning signal 2 mA

Maintenance signal 3 mA

Power supply 13 to 30 VDC, 3-wire

Ambient Conditions Temperature : -40 to +77℃, Pressure : 700 to 1300hPa, Humidity : 0 to 100%RH

Enclosure IP 66/67, NEMA 4X

Dimensions 160mm×￠89mm

Weight (Approx) 2.2 kg Approvals ATEX, IEC, UL, CSA, CE-mark

The Draeger PIR 3000 is an explosion proof infrared gas detector for the continuousmonitoring of flammable gases and vapours. With a GRP junction box, 316 stainlesssteel enclosure and excellent measuring performance, the PIR 3000 offersunsurpassed price performance ratio.

Draeger PIR 3000

The PIR 7000 is a SIL 2 approved explosion proof infrared gas detector for thecontinuous monitoring of flammable gases and vapours. With a 316 stainlesssteel enclosure and drift free heated measurement optics, it is built for theharshest and offshore applications.

Draeger PIR 7000

|G

as D

ete

ction

: Fixe

d G

as D

ete

ction


Gas Detector

[ 18 ]

Type Transmitter with catalytic bead sensor

Gases Flammable gases and vapors in ambient air

Measuring range Type XTR 0000 and 0001 0 to 100%LEL

Type XTR 0010 and 0011 0 to 10%LEL

Signal Output Normal operation 4 to 20mA

Warning 3.4 mA

Fault ＜ 1.2 mA

Power Supply 12 to 30 VDC (nominal 24 VDC) max. 110 mA at 24V

Ambient Temperature -40 to +65℃Conditions Pressure 700 to 1300hPa

Humidity 5 to 95%RH

Enclosure IP 65/66, glasfiber reinforced polyester

Dimensions Type XTR 0000 : 80×145× 55mm

(H×W×D) Type XTR 0001 : 110×145×55mm

Weight (Approx) 600g

Expected lifetime typical ＞ 3 years

Approvals ATEX, CE-mark

The Draeger PEX 3000 is an explosion proof gas detector for thecontinuous monitoring of flammable gases and vapours in ambient air.

Draeger PEX 3000

Type Sensing head with catalytic bead sensor

Gases Flammable gases and vapors in ambient air

Full scale deflection SE Ex PR M and HT M With suitable central controller 100% of the LEL

SE Ex LC M With suitable central controller 10% of the LEL

Response time SE Ex PR M and HT M T50 ≤6 s, T90 ≤15 s (methane)

(at 25℃) SE Ex LC M T50 ≤6 s, T90 ≤20 s (methane)

Ambient Conditions SE Ex PR M Min .temperature : -50℃ Max. : T4: +85℃, T5: +55℃, T6: +40℃SE Ex LC M Min .temperature : -40℃ Max. : T4: +85℃, T5: +50℃, T6: +40℃SE Ex HT M Min .temperature : -50℃ Max. : T3: +150℃Pressure 700 to 1300hPa

Humidity 0 to 95%RH

Junction box SE Ex PR M and LC M IP 66, glasfiber reinforced polyester (GRP)

SE Ex HT M IP 66, cast iron enclosure, galvanized

Dimensions SE Ex PR M and LC M Standard junction box 140×80×55mm incl. sensor and cable entry

(H×W×D) SE Ex PR M and LC M Big junction box 120×130×55mm incl. sensor and cable entry

SE Ex HT M 160×150×80mm

Weight (Approx) SE Ex PR M and LC M 0.6kg, SE Ex HT M 1.5kg, Sensor 0.2kg

Expected lifetime typical ＞3 years

Approvals MED, CE-mark

Using the heat-of-reaction measuring principle, the Draeger Polytron SEEx sensing heads are gas detectors that allow for the continuousmonitoring of combustible gases and vapours in the ambient air.

Draeger Polytron SE Ex

|G

as D

ete

ction

: Fixe

d G

as D

ete

ction

[ 19 ]

The Draeger Polytron 2 XP Ex is an explosion proof gas detector for continuousmonitoring of combustible gases and vapours in ambient air.

Draeger Polytron 2 XP Ex

The Draeger Polytron FX is an explosion proof, gas detector for the continuous monitoring ofcombustible gases and vapours in ambient air. Non-intrusive calibration and maintenancemeans no special area permits are required to perform routine tasks.

Draeger Polytron FX

Type Explosion proof transmitter

Gases and Range Combustible gases and vapors; 0 to 100%LEL


Maintenance 4 ±1 mA 1 Hz modulation

Fault ＜1.2 mA

Relays (optional) Two alarm relays, one fault relay SPDT;

user programmable Rating: 5A 230VAC, 5A 30VDC


Ambient Conditions Temperature -40 to +80℃ (with catalytic bead sensor)

Temperature -40 to +65℃ (with IR sensor)

Pressure 700 to 1300hPa

Humidity 0 to 100%RH

Enclosure IP 66; 3/4" NPT female conduit entry, NEMA 4X & 7

Dimensions 180 ×130 ×130mm (Cat. Bead sensor),

(H ×W ×D) 305 ×130 ×130mm (IR sensor)

Weight (Approx) 2.1kg (Cat. Bead sensor), 2.6kg (IR sensor)

Approvals ATEX, UL, CSA, CE-mark


Gases and Range Combustible gases and vapors; 0 to 100%LEL or 0 to 10 %LEL

Display 3 digit LCD; resolution 1 %LEL


Maintenance 4 ±1 mA 1 Hz modulation, or steady 3 mA; user selectable

Fault ＜2 mA


Ambient Conditions Temperature -40 to +80℃ (with catalytic bead sensor)

Temperature -40 to +65℃ (with IR sensor)

Pressure 700 to 1300mbar


Enclosure Power-coated aluminum transmitter housing,

Stainless steel sensor housing

Enclosure rating IP 66; 3/4" NPT female conduit entry, NEMA 4X & 7

Dimensions 165 ×115 ×100mm (Cat. Bead sensor),

(H ×W ×D) 295 ×115 ×100mm (IR sensor)

Weight (Approx) 1.5kg (Cat. Bead sensor), 1.9kg (IR sensor)


|G

as D

ete

ction

: Fixe

d G

as D

ete

ction


Gas Detector

[ 20 ]

Use Rugged and reliable gas detector for the protection of

personnel from toxic and oxygen gas hazards.

Suitable for use in Zone 1 or 2 hazardous areas and North

American Class I , II Division 1 or 2 areas.

Gases and Range Toxic gases and Oxygen in various ranges (see sensor data sheet)

Signal Output 0- 100%FSD 4-20mA

Fault = 3mA

Calibration due selectable off or 3mA

Max. over range 22mA

Inhibit (toxic sensors) = Selectable 3mA or 4mA Inhibit

(Oxygen sensor) = Selectable 3mA or 17.4mA

Material Transmitter : Epoxy painted aluminium alloy LM25 or 316

Stainless steel

Sensor : 316 Stainless steel with PTFE filter


Ambient Temperature -40 to +55℃Conditions Pressure 90 to 110kPa


IP Rating IP 66, NEMA 4X


Weight (Approx) Aluminium alloy LM25: 1.7kg, Stainless steel 316: 3.7kg



Gases and Range Toxic gases and Oxygen in user selectable ranges (see sensor data sheet)

Display Backlit LCD; 2 lines, 20 characters menu structure and messages in real text


Maintenance 4 ±1 mA 1 Hz modulation, or steady; user programmable

Fault ＜1 .2 mA

Digital HART, RS 485


Ambient Conditions Temperature : -40 to +65℃, Pressure : 700 to 1300mbar, Humidity : 0 to 100%RH

Enclosure IP 66; 3/4" NPT female conduit entry, NEMA 4X & 7

Dimensions (H×W×D) 275×130×130mm

Weight (Approx) 2.4kg


The Sensepoint XCD transmitterprovides comprehensive monitoringof flammable, toxic and oxygen gashazards in potentially explosiveatmospheres, indoor and outdoors-and is marked by installation ease andflexibility, user-friendly operation andcost-effective gas monitoring.

Honeywell Sensepoint XCD

Toxic, 2 wire loop powered 4-20mAgas transmitter with integral gasconcentration display.

Honeywell Series 3000 MkII Transmitter

The Draeger Polytron 2 XP Tox is an explosion proof gas detector for continuous monitoring of toxic gasesand oxygen in ambient air. The transmitter converts the signal from an electrochemical sensor to 4 to20mA analog, HART or RS485 digital signal output. The unit is designed for one-man calibration, andoffers a variety of diagnostics and self test features.

Draeger Polytron 2 XP Tox

Use 3wirw, 4-20mA and RS485 MODBUS output fixed point

detector with in-built alarm and fault relays for the protection

of personnel and plant from flammable, toxic and Oxygen

hazards. Incorporating a transmitter with local display and

fully configurable via non-intrusive magnetic switch interface.

Wide range of sensors available.

Gases and Range Flammable CAT, IR (methane, propane)

Toxic gases and Oxygen (see sensor data sheet)

Signal Output Normal 4-20mA Fault ≥0.0＜1.0mA

Max. over range 22mAn hibit = 2.0mA or 4.0mA

Material Transmitter : Epoxy painted aluminium alloy LM25 or 316

Stainless steel

Sensor : 316 Stainless steel

Weather Protection : Plastic

Power Supply 16 to 32 VDC

Ambient Temperature -40 to +65℃Conditions Pressure 90 to 110kPa


IP Rating IP 66


Weight (Approx) Aluminium alloy LM25: 2.0kg, Stainless steel 316: 5.0kg

Approvals ATEX, IEC, UL, GB, KTL, CE mark

|G

as D

ete

ction

: Fixe

d G

as D

ete

ction

[ 21 ]


Gases and Range Toxic gases and Oxygen in various ranges


Relay A1, A2 and Fault 2A at 30VDC

Digital LonWorks (optional) - only available on ATEX certified version

Material and Weight 316 Stainless steel 5.25kg

Power Supply 24VDC norminal (18 to 32 VDC)

Power Consumption Apex 3W toxic, 4.6W catalytic, 4.6W thick film

Ambient Conditions Temperature -40 to +65℃Pressure 700 to 1300hPa


Enclosure IP 66/67, NEMA 4 / 6

Response time Catalytic T50＜5 seconds, T90＜10 seconds

Toxic T50＜12 seconds, T90＜30 seconds

Approvals ATEX, UL, CSA, CE mark

The sensor can be fitted with a choice of over 40 toxic gas ranges and wide range of detectableflammable gases. Each cartridge is pre-calibrated and simply plugs into the sensor. The IntrinsicallySafe design allows cartridges to be changed with the unit under power. The transmitter recognizes anewly fitted sensor cartridge and automatically reads all the configuration information from it.

Honeywell Apex Transmitter


Output Measuring range 4-20 mA sink or source

Inhibit 1-3 mA (default 2 mA)

Warning 0-4 mA (default 4 mA)

Fault 0 mA

Over range 20-21.5 mA (default 21mA)

Digital Output Optional Multidrop Modbus RS485

Material 316 stainless steel

Weight (Approx) 1.6kg

Accuracy Optima PLUS (HC) Baseline ＜±1%LEL, 50% FSD＜±2%LEL

Optima PLUS (ET) Baseline ＜±2% LEL, 50% FSD ＜±3%LEL

Response time T50 ＜4.5 seconds, T90 ＜6.5 seconds (for methane, including weather protection)

Ambient Conditions Temperature -40 to +77℃Pressure 700 to 1300hPa


Enclosure IP 66/67

Power supply 18 - 32 VDC (24V nom), ＜4,5 W max

Approvals ATEX, UL, CSA

Market leading point infrared flammable gas detector offering unrivalledperformance and sensitivity.

Honeywell Searchpoint Optima Plus Point Infrared Gas Detector

|G

as D

ete

ction

: Fixe

d G

as D

ete

ction


Control Unit

[ 22 ]

Operation Single 'Test/Accept/Reset' push button for normal use.

Three further hidden push buttons per module for

configuration via intuitive control system.

Backlit display System and channel status including gas type, measuring

range, units of measure,digital gas reading, bar graph

display 0-100%FSD, system status indicators including alarm

set point, alarm activated and power health.

Other indication Ultra-bright LEDs : Alarm (red), power (green), fault (amber)

Audible alarm 85dBA at 1m

Ingress protection Indoor use, IP 44 in accordance with EN60529:1992

Weight 6kg (13.2lbs)

Power Supply 85-265Vac, 50/60Hz auto-sensing

19-32Vdc

Maximum power 160Wac or 63Wdc

Number of Inputs Up to four channel modules may be fitted to any system.

mV and mA types available input modules are suitable for

the following type of detector.

Detector type 2/3 wire 4-20mA Transmitters

Relays Alarm 1 (A1), Alarm 2 (A2)

Single channel controller, housed in a regged ABS enclosure for in- and outdoor applications

Power supply 110/240 VAC, 50/60Hz

Input 2/3-wire 4 to 20mA transmitter or Draeger Polytron SE Ex measuring head

Output 3 gas alarm relays, fault relay, inhibit relay

Remote acknowledgement, 4 to 20 mA (optional), RS 232 (optional)

Operation One-button operation, Large LC-display, status LED's, Built-in buzzer

Battery buffer 2×12VDC, 1.2Ah (optional)

Ingress protection IP 65, NEMA 4 Dimensions (H×W ×D) 270×270×90mm

Weight 2.5kg Wiring 0.5 to 2.5 mm2 ; AWG 20 to 14

Ambient conditions Temperature : 0 to 55℃, Pressure : 700 to 1300hPa, Humidity : 0 to 100%RH

Approvals CE, ATEX

Security at a glance. TheQuadGard control unit can beconfigured for four differenttransmitters. Whether it isindoors or outdoors-the flatenclosure is easy to mount.Independent and group alarmoutputs are available.

Draeger QuadGard

Wall mounted 1 to 4 channel controlpanel for the local annunciation ofgas hazards as detected by theHoneywell Analytics range of gasdetectors. Suitable for use as anindoor stand-alone, self-containedinstallation or as part of a largerdistributed control system.

Honeywell TouchPoint

Robust, reliable and very cost effective. The compact Regard-1 is a complete standalonesystem for the control of a single gas detector; suitable for monitors of toxic gases, oxygen,combustible gases and vapours.

Draeger Regard 1

Control unit Low profile wall mounting enclosure

Local alphanumeric display

Front panel membrane push buttons

Front panel LED's

Internal alarm

Ingress protection IP 65, NEMA 4

Power Supply 110 V/230 VAC, 50-60 Hz

5 W (100 W maximum)

24 VDC, 2A

Outputs (system) MA 1, MA 2, MA 3 and common fault

voted, common or single alarm configurations

Input modules 2/3 wire 4-20mA Transmitters

3 wire pellistor

Outputs A1, A1, A3 / fault alarm relays

(per input) Repeat 4-20mA

Approvals EC, EMC EN50081-1 and 50082-2, UL,

LVD EN 61010-1

|C

alib

ratio

n G

as

[ 23 ]

Calibration GasProfessional Safety Solutions

Cal Gaz Calibration gases

Pressure reducer (Regulators)

•25%LEL Methane / Air



•50% Methane / N2

•50%LEL Iso-Butane / Air

•8% iso-Butane / N2

•8% n-Butane / N2

•50%LEL Propane /Air

•50%LEL Pentane / Air

•50%LEL H2 / Air

•1000 ppm H2 / N2

•5% O2 / N2

•18% O2 / N2

•70 ppm CO / Air or N2



•25 ppm H2S/ Air or N2

•99.99% N2

•25 ppm NH3 / N2

•50 ppm NH3 / N2

•1000 ppm iso-Butylene / Air

•3% CO2 / N2

•5% CO2 / N2

•191 ppm Ethanol / N2

•260 ppm Ethanol / N2

•Chlorine

•Hydrogen Chloride

•Mercaptan

•Nitrogen Dioxide

•Phosphine

•Hexane

•Toluene

•Sulphur Dioxide

•Benzene

•Nitric Oxide

•Ethylene Oxide

•Helium UHP

•713 Regulator 1.5LPM

•715 Regulator 0.5LPM

•Trigger Regulator 0.5LPM/ 6.0 LPM

•2.5%(50%LEL) CH4 / 18% O2 / 100ppm CO / 25ppm H2S / N2

•2.5%(50%LEL) CH4/ 12% O2 / 50ppm CO / 25ppm H2S / N2

•0.9%(50%LEL) I-C4H10 / 12% O2 / 50ppm CO / 25ppm H2S / N2

Non-refilable Multi-gas calibration Cylinders

Non-refillable Single Gas calibration cylinders

Available calibration Gases

|A

lcoh

ol &

Dru

g Te

st Kit

[ 24 ]

Alcohol & Drug Test KitProfessional Safety Solutions

Alcohol & Drug Test Kit


Weight 195g

Measurement Range 0 to 0.500%BAC

Measurement Principle Electrochemical alcohol specific DraegerSensor 1/4" technology

Visual signal 3 color LED(green, yellow, red)

Audible signal Signaling to support messages and warnings or alcohol concentration limits

Data storage Draeger 6510 : Last 10 tests

Draeger 6810 : Last 250 tests with date and time

Power Supply 2×1.5V alkaline(AA) batteries

Approval DOT / NHTSA

Optional Calibration Kit (Dry gas & Regulator)

Printer with cable (Draeger alcotest 6810)

Dimensions 127×82.5×25.4mm

Weight 227g

Measurement Range 0.00% -0.40% BAC

Measurement Principle Semiconductor type alcohol sensor

Accuracy ±0.01%@ .20%BAC

Digital Display 3 Digit LED display

Power 9 Volt alkaline battery

Blowing Time 5 sec.

Response Time 5 sec.

Approval DOT/ NHTSA


Weight 115g

Measurement Range 0.00% -0.40% BAC / 0.00 - 4.00‰ /

0.00 -2.00mg / l BrAC

Measurement Principle Semiconductor type alcohol sensor

Accuracy ±0.01%@ 0.05%BAC

Digital Display LED display

Power Two 1.5Volt (AA) alkaline batteries

Approval DOT/ NHTSA, CE, FDA 510K listed,

Australian standard

The AlcoHawk ABI is a breathalcohol screener that quicklyscreens for the presence ofalcohol.

AlcoHawk ABI

No Calibration Servicerequired. Breathalyzer withPre-Calibrated replaceablesensor module.

AL 6000

The Draeger Alcotest 6510/6810 offers professional users rapid and precise breath-alcohol analysis ina compact, user-friendly form. This instrument is listed on National Highway Traffic SafetyAdministration Conforming Products List (NHTSA CPL) as an Evidential Breath Tester for Departmentof Transportation applications.

Draeger Alcotest 6510 / 6810

|A

lcoh

ol &

Dru

g Te

st Kit

[ 25 ]

Alcotest tubes 0.5‰ 10 tubes, 10 mouthpieces, 1 alcotest measuring bag

Alcotest tubes 0.8‰ 10 tubes, 10 mouthpieces, 1 alcotest measuring bag

This easy to use, single used measuring system consist of an alcotest tubes, a mouthpiece and a measuring bag. When the tested person blows a volume of breathwhich contain alcohol, the chemical reagent system in the tubes will change colour fromyellow to green when alcohol is present.

Breath Alcohol Measurement with Draeger Alcotest-Tubes

Draeger DrugCheck (6) COC, OPI, AMP, MET, PCP, THC 5 test kit / 25 test kit

Draeger DrugCheck (3) COC, OPI, AMP 25 test kit

※ COC : Cocaine metabolites OPI : Opiates AMP : Amphetamines MET : Methamphetamine + designer amphetamines

THC : Tetrahydrocannabinol (Cannabis) PCP : Phencyclidine MOR : Morphine BENZ : Benzodiazepines,

BARBI : Barbiturates

A part of diagnostic and forensic investigations, the Draeger DrugCheck enables thesimultaneous qualitative detection of up to six classes of illegal substances in one sample oforal fluid. This very straight forward test is designed to be performed by anyone, anytime andanywhere.

Draeger DrugCheck


Weight 100g

Measurement Range 0.000% -0.400% BAC / 0.000 - 4.000‰ / 0.000-2.000mg/l BrAC

Measurement Principle Fuel cell type alcohol sensor

Accuracy ±0.005%@ 0.100%BAC

Audible warnings 3 steps beep warning of alcohol detection with LED display

Power Two 1.5Volt (AA) alkaline batteries

Approval DOT/ NHTSA, CE

Optional Calibration Kit (Dry gas and Regulator)

Printer with Cable, PC software CD & USB Cable

The Fuel Cell Sensor Technolgy, AL 9000 is intended to measure alcohol in humanbreath.

AL 9000

|F

low

Ch

eck

(Sm

ok

e G

en

era

tor)

[ 26 ]

Flow Check(Smoke Generator)Professional Safety Solutions

Flow Check(Smoke Generator)

Air-Flow tester Kit : included carrying box, comprising an aspirator bulb, air flow test tubes(10) and sealing caps

Air flow test tubes can be used universally. Simple and easy to use for the identificationof air flows movements.

Draeger Air Flow Tester

The Draeger Flow Check air current indicator produces a harmless cloud of smoke that floats freely andeasily, because it has the same density as ambient air. Consequently, slight air currents become visible to easyidentify leaks and test the integrity of air-tight systems.

Draeger Flow Check

Dimension 300×200×70 mm

Weight 500g

Smoke Time per Ampoule Approx. 3 min

Operating Time Approx. 20 min

Battery Ni-Cd 4.8V-12V/600mA

Accessories Flow check ampoules (3 ampoules and 1 nozzle)

|A

ir Pu

rifying

Re

spira

tor

[ 27 ]

Air Purifying RespiratorProfessional Safety Solutions

Half Mask

Practical use and comfort: Draeger X-ploreⓇ 3300 offers both and additionally excels byits economical and low maintenance use.

Draeger X-ploreⓇ 3300

•Reusable Half mask with a dual filter bayonet connection

•Mask made from Soft-TPE material for friendly to the skin and comfortable to wear

•Economical, easy to maintain, good wearing comfort

•Tested and certified according to EN 140 and NIOSH

•Maintenance free

A perfect combination of durability, protection and comfort. For harsh conditions andlong duration use, the Draeger X-plore 3500 half mask is the first choice.


•Reusable, premium quality half mask with a dual filter Bayonet connection

•Mask made from hypoallergenic Draegerflex material for longterm, demanding jobs

•Very comfortable head harness with "drop down" neck strap

•Each mask is supplied with a re-sealable storage bag

•Tested and certified according to EN 140 and NIOSH

•Spare parts available

Filter system for maximum wearer comfort. The Draeger X-ploreⓇ bayonet filters areeasy to attach, minimize restrictions on field of view and offer reliable protection fromharmful gases, vapors and particles.

Draeger X-ploreⓇ Bayonet filter

•Innovative and comfortable

•Easy and secure attachment

•Many possibilities

•Packaged in pairs

•All gas and combination cartridges are equipped with a robust plastic housing

•CE-marked in accordance with EN 14387 and/or EN 143:2000

|A

ir Pu

rifying

Re

spira

tor

[ 28 ]

Air Purifying RespiratorProfessional Safety Solutions

Full Face Mask

Whether in the chemical, metal, or automotive industries, ship building, maintenance,supplies, or disposal: The Draeger X-ploreⓇ 5500 full face mask is the right solution forenvironments where not only increased respiratory protection is required, but also aclear vision is mandatory.


•Dual filter bayonet connection

•Double sealing frame ensures comfortable and tight fit

•Shock-resistant polycarbonate visors

•Mask material in EPDM

•Approved to EN136

Double and triple safety. The Draeger X-ploreⓇ 6300 meets stringent requirements withregard to reliability, secure fit and comfort. An economical full-face mask for professionaluse in industry.


•Single-filter face mask

•Double sealing frame ensures comfortable and

tight fit

•Formerly known as Panorama series

•5 point head harness

•Lightweight blue plastic frame

•Mask material in EPDM

•Scratch resistant plexiglass (PMMA) visors

•Blue plastic exhalation valve cover, no neck strap

•Approved to EN136, CE marking, NIOSH approved,

SAI Global approved

Synonymous with experience and safety. The filters of the Draeger X-ploreⓇ Rd40 seriesprovide economical and effective cleaning of breathing air from harmful substances - beit in fumigation, agricultural, clean-up or general manufacturing industries.

Draeger X-ploreⓇ Rd40 filter

•Offers various filter types for major applications

and protects against many hazardous substances

•Long life

•Resealable individual packaging

•The aluminum housing ensures that any damage

to the filter is easily detected, therefore providing

extra security

•All filters are CE-marked in accordance with EN

14387 and/or EN 143:2000

Especially durable with wide panoramic view: Draeger X-ploreⓇ 6530 is an exceptional fullface mask for professional use in the most versatile applications.


•Single-filter face mask

•Double sealing frame ensures comfortable and

tight fit

•Formerly known as Panorama series

•5 point head harness

•Lightweight blue plastic frame

•Stainless steel speech diaphragm for clear

communication

•Shock & heat -resistant polycarbonate visors

•Black plastic exhalation valve cover with neck strap

•Approved to EN136, CE marking, NIOSH approved,

SAI Global approved

|E

scap

e D

evice

[ 29 ]

Escape DeviceProfessional Safety Solutions

Escape Emergency Breathing Devices(EEBD)

The Draeger Saver emergency escape breathing apparatus provides up to15 minutes of breathable air in a wide range of hazardous environments.

Draeger Saver CF series

Saver CF 10 Saver CF 15

Size (L ×W×H) (mm) 490×160×250 490×160×250

Cylinder Free Capacity (litres) 400 600

Cylinder Water Capacity (litres) 2 3

Maximum Working Pressure (bar) 200 200

Medium Pressure (bar) 5 5

Airflow to Hood (bar) 35-37 35-37

Operating Temperature Range (℃) -15 to +60 -15 to +60

The Draeger PARATⓇ C fire escape hood gives you atleast 15 minutes escape time in the event of a fire.

Draeger PARATⓇ C

Filter performance Combination cartridge (gas & particle filter) provides protection against smoke, gases and particles

Filter Type CO-P2

Approved duration minimum of 15 minutes

Service Life 12 years total (6 years maintenance free - filter and valve change required after 6 years)

Weight approx. 600 grams

Dimensions PARAT C Single/Traveler/Soft-Pack - 8×19×13.5cm (H×L×W)

PARAT C Box - 18×19×8 cm (H×L×W)

PARAT C Twin-Pack - 9×33×22.5 cm (H×L×W)


|E

scap

e D

evice

[ 30 ]

Escape DeviceProfessional Safety Solutions


The Draeger PARATⓇ 4500 is an escape hood with a combination ABEK P15 filter. Approved tothe only recognized standard for industrial escape devices (DIN 58647-7)-it provides users aminimum of 15 minutes escape time from gases and particles.

Draeger PARATⓇ 4500

Filter performance Combination cartridge (gas & particle filter) provides

protection against organic and inorganic gases and particles

Filter Type ABEK-P15 approved in accordance to DIN 58647 Part 7

Approved duration minimum 15 minutes

Service Life 12 years total (4 years maintenance free - thereafter filter change every 4 years

Weight approx. 600 grams

Dimensions PARAT 4520 Soft-Pack - 8×19×13.5cm (H×L ×W)

PARAT 4530 Traveler-Pack - 8×19×13.5cm (H×L ×W)

PARAT 4560 Box - 18×19×8 cm (H×L ×W)

The Draeger PARATⓇ 3100 is a half mask escape device equipped with a multi-gasABEK15 filter. Approved to the only recognized standard for industrial escape devices(DIN 58647-7)-it provides users a minimum of 15 minutes escape time.

Draeger PARATⓇ 3000 series

Filter performance ABEK 15 gas filter for protection against organic and anorganic gases

and vapours, approved in accordance to DIN 58647 part 7

Duration at least 15 minutes

Shelf life 4 years maintenance free, filter exchange every 4 year, total shelf life 12 years

Weight PARAT 3100 - approx. 360g, PARAT 3200 - approx. 330g

Dimensions PARAT 3100 - 170×110×90mm (L×W×H)

PARAT 3200 - 170×110×60mm (L×W×H)

|B

rea

thin

g A

pp

ara

tus

[ 31 ]

Breathing ApparatusProfessional Safety Solutions

Self-Contained Breathing Apparatus(SCBA)

The Draeger PSSⓇ 3000 is a new generation of high performing breathing apparatus forfirefighters. Combining comfort with exceptional pneumatic performance, it is designed forapplications where simplicity and ease of use are key essentials. Lightweight yet robust, andeasy to don, this advanced breathing apparatus provides the ultimate in breathing protection.

Draeger PSSⓇ 3000

Weight incl. LDV 2.70 Kg

Dimensions 590×290×160 mm (H×W×D)

Input Pressure 0 - 300 bar

Nominal 1st Stage output pressure 7.5 bar

1st stage output flow ＞1000 l/min

LDV output flow ＞ 400 l/min

Whistle activation pressure 50 - 60 bar

Approvals EN 137:2006 Type 2, vfdb 0802

For use in industrial applications where a simple, robust and easy to use breathingapparatus is required, the Draeger PASⓇ Lite Self-Contained Breathing Apparatus(SCBA)combines reliability with comfort and performance.

Draeger PASⓇ Lite

Weight incl. LDV 2.70 Kg

Dimensions 590×290×160 mm (H×W×D)



1st stage output flow ＞ 1000 l/min



Approvals EN 137 2006 Type 2, EN 14593 pt1, MED, SOLAS II-2

|B

rea

thin

g A

pp

ara

tus

[ 32 ]


Self-Contained Breathing Apparatus(SCBA)

New generation SCBA designed for professional firefighters combines robust design andstate-of-the-art ergonomics, a wide range of configurations and options to suit individualrequirements.

Draeger PSSⓇ 7000

PSS 7000 PSS 7000 Bodyguard

Weight of complete set 11.7 Kg 12.2 Kg



1st stage output flow ＞1000 l/min

LDV output flow ＞400 l/min


Approvals EN 137:2006 Type 2, vfdb 0802

The Draeger PSSⓇ 5000 SCBA is a high performance breathing apparatus for the professional firefighter.Combining advanced ergonomics with a wide range of configurable options the Draeger PSSⓇ 5000 providesthe user with the comfort and versatility to meet the demands of first responders.

Draeger PSSⓇ 5000

PSS 5000 DS PSS 5000 DP PSS 5000 DP Bodyguard 7000

Weight 3.85 Kg 4.00 Kg 4.60 Kg



1st stage output flow ＞ 1000 l/min



Approvals EN 137:2006 Type 2

|B

rea

thin

g A

pp

ara

tus

[ 33 ]


SCBA Face Mask

The Draeger FPS 7000 full-face mask sets new standards with regard to safety andwearer comfort for use by firefighters, emergency services and in mining.

Draeger FPSⓇ 7000

Mask body Convenient, hypoallergenic and flexible silicone or EPDM

(dermatologically tested)

Harness 5-point connection with a large contact surface area at the back of the head,

alternatively a hairnet

Mask-helmet 2-point connection for Draeger HPS 6200 either with Draeger Q-fix or with

combination Draeger S-fix connection

Size Mask body in 3 sizes (S, M and L) compatible with inner mask in 3 different sizes

Visor polycarbonate visor available with different coatings

Connector P, RA, ESA, PE

Weight approx. 600 g (varies according to version)

Approvals EN 136 Class. 3, EN 137 type 2

The Draeger FPS 7000 full-face mask sets new standards with regard to safety andwearer comfort for use by firefighters, emergency services and in mining.

Draeger Panorama NovaⓇ

Mask body either EPDM or silicone

Visor either impact-resistant polycarbonate, coated polycarbonate or

particularly chemical-resistant triplex glass

Connector made of robust plastic with inhalation and exhalation valve.

Draeger plug-in connector for positive-pressure lung demand valve

Weight approx. 550-650 g (depending on the visor)

Approvals in accordance with EN 136 (CE symbol) and NIOSH

|B

rea

thin

g A

pp

ara

tus

[ 34 ]


BA Cylinder

Closed Circuit Breathing Apparatus

Type Water Capacity Working Pressure

Steel 6 Litre 200 bar

6 Litre 300 bar

Carbon Composite 6.8 Litre 300 bar

8 Litre 300 bar

9 Litre 300 bar

A wide range of breathing air cylinders, giving high quality, performance and reliability.A complete range of 200 bar and 300 bar steel and composite cylinders.Sizes range from 6L 200bar to 9L 300 bar with a choice of cylinder valves.

Draeger Compressed Air Cylinder

Duration of use 4 h according to EN 145 and NIOSH

Weight, ready for use 15.5kg (incl. mask, full oxygen cylinder(aluminum),

CO2absorber and approx. 1.2kg cooling ice)

Dimensions 595×450×185mm (H×W ×D)

Constant oxygen metering 1.5 - 1.9 l/min O2

Minimum valve ＞80 l/min O2

Breathing bag volume 5.5 liter

Bypass valve ＞50 l/min

Operating temperatures -40℃ to +90℃ (if stored at room temperature)

Approvals EN 145, Ex protection according to EN 50020,

Eex IIC T4, Eex iaI and NIOSH

The closed-circuit breathing apparatus Draeger PSSⓇ BG 4 plus combinesuncompromising safety with the greatest breathing and wearing comfort. It supplies the wearer with breathing air in a toxic environment for up to four hours.

Draeger PSS BG4 Plus

|C

om

pre

ssor

[ 35 ]

CompressorProfessional Safety Solutions

Compressor

•Easy Operation

•Pure Breathing Air

•Innovative materials for durable installations

•Complete filling application

•200 bar or 300 bar filling valve with automatic venting, pressure gauge

and 1 metre long filling hose

•Mobile, 3-stages

•Purification system P11

The Draeger DE 100 mobilecompressor is by far thesmallest and lightest ofDraeger’s mobilecompressors.

Draeger DE 100

•The small compact class

•Simple and safe operation


•Compressor block with micronic type suction filter, intercoolers, interstage

separator interpressure safety valves and filter set P21

The Draeger JUNIOR 100 isthe most compact, mobilerecreational Draeger divingcompressor.

Draeger Junior II

•The small compact class

•Simple and safe operation


•Compressor block with micronic type suction filter, intercoolers,

interstage separator, interpressure safety valves and filter set P21

•Available in three different versions (200 L/min, 250 L/min, 320 L/min)

The universal mobilecompressors DraegerMARINER 200/250/320are ideally suited forprofessional operationsunder the most extremeoperating conditions.

Draeger Mariner

•Modular design

•Intelligent design and state-of-the-art technologies


•Compressor block with micronic type suction filter, intercoolers,

interstage separator, interpressure safety valves, filter set P61

•Securus filter monitoring system

•B - control

•Available in five versions with air supply capacities of 260 L/min up to 680 L/min

Efficient and "super silent":The sound-proofed highpressure compressor station(up to 420 bar) DraegerVERTICUS 5 provides highoperational performance andoffers safe and reliablebreathing air supply forprofessional applications.

Draeger Verticus

|C

om

pre

ssed

Air Q

ua

lity Test K

it

[ 36 ]

Compressed Air Quality Test KitProfessional Safety Solutions

Compressed Air Quality Test Kit

•Draeger Aerotest Simultan HP

comprising of 1 reducer with manual connection, 1 connecting adapter for 4 Draeger-Tubes, 1 package Draeger

Oil Impactor, 1 adapter 200 bar, 1 adapter 300 bar, Timer, Tube opener, bubble test hose, pack of 5 sintered filters,

instruction manual for use, transport case

Draeger Aerotest Simultan HP is used to determine the quality of respiratory air in high-pressure applications. In combination with the new Draeger Oil Impactor the system offers aunique quality level for the monitoring of compressed air.

Draeger Aerotest Simultan HP


Weight Approx. 3.0kg

Measurement Oil, Water Vapour, CO, CO2

Supply Pressure 200/300 bars

Connection G 5/8

Flow 0.2 and 4.0 L/min


Weight Approx. 3.0kg

Measurement Oil, Water Vapour, CO, CO2

Supply Pressure 15 bar

Connection 9 mm

Flow 0.2 and 4.0 L/min

The Draeger Aerotest Alpha isthe instrument of choice formonitoring the purity ofcompressed air in the lowpressure range. In combinationwith the Draeger Oil impactor,the system achieves anunprecedented quality ofcompressed air monitoring.

Draeger Aerotest Alpha

•The Draeger Aerotest Alpha

comprising of 1 pressure reducer, measuring device for 4 tubes,

impactor adapter, coupling, barbed nipple, timer,tube opener, buble test

hose, pack of 5 sintered filters, instruction manual, transport case

The Draeger Aerotest Navy isdesigned for the quanttativedetermination of watervapour, oil, CO2, CO and O2 aswell as other impurities to becontained in the compressedair supplied from highpressure compressors orcompressed air to max.300bar.

Draeger Aerotest Navy

•The Draeger Aerotest Navy, complete

Consist of : 1 measuring device for 4 tubes, timer, break-off facility for

tubes, instruction manual in transportable case, one adapter for

compressor valve PN300 and one adapter for cylinder valve PN300, gas

detector pump accuro, spare parts for the accuro pump, T piece for O2

test.

Box of 10 Draeger tube, CO2

Box of 10 Draeger tube, CO

Box of 10 Draeger tube, Oil

Box of 10 Draeger tube, H2O

Draeger-Tubes Adapter for impactor Draeger Oil Impactor

|C

he

mica

l Pro

tectio

n S

uit

[ 37 ]

Chemical Protection SuitProfessional Safety Solutions

Chemical Protection Suit

•One piece type overall with hood made of Tyvek F material for single use

against sold and liquid chemicals SOLAS Approved

•Intergrated face cuff, welded gloves and stitched socks Grey version with

silvershiled gloves. Orange version with butyl gloves

•Zip fastener is located on the backside horizontally with doble over flap,

two snap and velcro fastener

•Zip fastener is covered by a cover flap with tapes

•Colour : Grey and Orange

•Suit sizes : M, L, XL

•Soft Draeger face cuff which fits with most mask types

•Made of Zytron 500, the softest laminate material in the market

•Fixed glove combination with a Barrier-glove on the inside and Butyl-

glove on the outside

•Fixed gloves combine butyl outer with laminate inner lining for increased

protective

•Gas-tight socks made of suits material

•Colour : Orange

•Weight : approx. 2.5kg

•Suit sizes : M, L, XL, XXL

Splash protection from headto toe. The protective overallsSPC 3800 prevent contactwith solid and liquidchemicals and is primarilyused in industry and shipping.

Draeger SPC 3800

The Draeger CPS 5800 is alimited-use chemicalprotective suit for industrialapplications and operationson board that involve agaseous, liquid or solidhazardous substance. Thesuit is especially designed foroperations requiring optimalmaneuverability, such asconfined space entry ordecanting substances.

Draeger CPS 5800

•Larger visor offers almost natural field of vision just like the FPS 7000

•Made of D-mex, a very light and flexible symmetric-5-layer-material

•Fixed glove combination with a Barrier-glove on the inside and

Butyl - glove on the outside

•New glove combinations

•Improved boot adaptation for more space around the calves

•Colour : Orange and Blue

•Weight : 6.9kg (with boot), 5.5kg (with socks)

•Suit sizes : S, M, L, XL, XXL

•One piece chemical protection suit against hazardous gases, liquids, and

particles

•Made of Zytron 500, the softest laminate material in the market

•Fully encapsulating suit for maximum-protection

•Fixed gloves combine butyl outer with laminate inner lining for increased

protective againts chemicals and punctures. Kevlar over-glove for

additional cut protection

•Intergrated gas-tight socks with boot flaps for use with multiple boot

sizes

•Colour : Orange

•Weight : approx. 3kg

•Suit sizes : S, M, L, XL, XXL

The gas-tight suit DraegerCPS 7900 provides excellentprotection against industrialchemicals, biological agents,and other toxic substances.Its innovative materialqualifies the CPS 7900 equallywell for work in explosiveareas and for handlingcryogenic substances.

Draeger CPS 7900

The Draeger CPS 5900 is theideal disposable, gas-tightchemical protective suit forhazmat incidents. Wherecomplete protection againsthazardous gases, liquids andparticles is of the utmostpriority, this lightweightgarment is the suit of choice.

Draeger CPS 5900

|C

he

mica

l Pro

tectio

n S

uit

[ 38 ]

Chemical Protection SuitProfessional Safety Solutions

Chemical Protection Suit

•Certified to NFPA 1991 (2005 ed.) - Flash fire and Liquefied gas

•First single-skin suit certified to flash fire

•Maximum protection against chemical and biological agents

•Lightweight design for user comfort

•TWICE the lifecycle of other suits

•15-year MINIMUM shelf life

•Reusable and decontaminable

•Detachable secondary visor

•Certified to both NFPA 1991 (2005 ed.) and 1994 Class 2 (2007 ed.) also Certified to both EN 943-1 and EN 943-2

•Saint-Gobain CoretechⓇ Barrier Membrane technology

•Single-skin lightweight ensemble (＜5Kgs)

•Superior flame and abrasion resistance

•Reusable limited use design

•Ultra-compact for convenient, space-saving storage

•7+ year shelf life (lower life cycle cost)

ONESuitⓇ Flash meets the needs of those working in the most dangerous environments. Certified to NFPA1991 plus flash fire protection, this single-skin, lightweight protective garment protects against chemical andbiological agents in both liquid and vapor form. ONESuitⓇ Flash Protective Suits provide an added level ofprotection, without the need for an uncomfortable cover.

SAINT-GOBAIN ONESuitⓇ Flash

ONESuitⓇ Pro is the most affordable chemical protective suit, certified to the NFPA 1991 standard. It is also the only ensemble certified to both NFPA 1991 and NFPA 1994 Class 2, offering the highestlevels of protection against chemical and biological agents at a price comparable to other NFPA 1994Class 2 and non-certified products. Maximum protection, minimum price.

SAINT-GOBAIN ONESuitⓇ Pro

•Certified to NFPA 1991 (2005 ed.) - Liquefied gas

•Maximum protection against chemical and biological agents

•Ultra-lightweight for maximum user comfort

•Reusable and decontaminable

•TWICE the lifecycle of other suits

•15-year MINIMUM shelf life

•Detachable secondary visor

ONESuitⓇ Gard is engineered to meet the protection and comfort needs of those working in the mostdangerous environments. The marriage of Saint-Gobain Performance Plastics' technical expertise to real-world input from hazmat professionals has produced the single-skin ONESuitⓇ Gard. Ultra-lightweightdesign combines superior protection and maximum user comfort.

SAINT-GOBAIN ONESuitⓇ Gard

|C

he

mica

l Pro

tectio

n S

uit

[ 39 ]

•Dual Certified to NFPA 1994 Class 2 and NFPA 1992

•Maximum protection against chemical/biological agents

•Unique face mask interface provides vapor tight configuration

•Lightweight design for user comfort

•Saint-Gobain Coretech™‚ barrier material technology offers exceptional durability and flexibility

•Twice the lifecycle of other suits

•10-year shelf life

•Ultra-compact for convenient, space-saving storage

ONESuit Shield combines uncompromised protection with exceptional comfort in a Level Bconfiguration. Certified to CBRN First Response and Chemical Splash standards, thislightweight and durable garment provides enhanced mobility for performing the mostdemanding tasks.

SAINT-GOBAIN ONESuitⓇ Shield

•CE Certified Type 1aET

•Vapor Total Encapsulating Suit for maximum-protection against hazardous gases, liquids, and particles

•Made of Zytron 500, the softest laminate material

•Fixed gloves combine butyl outer with inner Barrier Glove liner

•Intergrated gas-tight sock boots with boot flaps for use with multiple boot sizes

•Colour : Orange or Charcoal

•Weight : approx. 4.1kg

•Suit sizes : XS, SM/MD, LG/XL, 2X/3X, 4X

Gas-tight styles for Level A protection include front and rear entry, flat back orexpanded back. Zytron 500 fabric also available in splash suits and coveralls.

Kappler Zytron 500

•Made of Zytron material

•The concept of an apparel matrix is pure Kappler innovation

•Simple system to identify protection levels

•Unsurpassed protection, an easy-to-use numbering system

•Easy-to-use numbering system

•Distinctly colored garments for clear identification

For thirty years Kappler has defined the protective garment industry with patentedfabrics, innovative seaming technology and unique garment designs.

Kappler Zytron Chemical Suits

|S

afe

ty He

lme

t

[ 40 ]

Safety HelmetProfessional Safety Solutions

Safety Helmet

•Excellent wearing comfort due to comfortable interior design

•Excellent wearing comfort due to comfortable interior design

•With ventilation system for optimal climate inside the helmet-sealable

•Individual adjustment of the head size by easy to operate adjustment wheel

•Various easy to adapt accessories for different applications available

•Available as set incl. robust safety goggles with Pinlock-Technology or as version without Goggles

The Draeger HPS 3100 - a multi-functional and universal helmet for the variousdemands of emergency teams in search and rescue missions, for forest and bushfirefighting, road accidents, height rescue and any kind of technical support operationsin emergency situations.

Draeger HPS 3100

•Helmet approved the prEN 443: 2008

•Helmet shell made from Duroplast (fiberglass) material

•Head size : 52-64, optional sizes : 50-51

•Harness : 3-point chin strap

•Nomex inner equipment

•Weight : approx. 1365g

•Reflective stripes available separately

•Upon request, choice of combination of helmet and front plate of different colours can be selected

•Polysulfone Visor

Wearing comfort and safety characterize the new Draeger HPS 6200 firefighting helmet.

Draeger HPS 6200

|C

alib

rato

r

[ 41 ]

CalibratorProfessional Safety Solutions

Temperature Calibrator

Models 350H 350H2 650H 650H2

Range 10℃above amb. to 350℃ 20℃above amb. to 650℃Resolution 0.1℃ 0.1℃Accuracy ±1℃ ±5℃Stability ±0.3℃ ±0.4℃ ±0.5℃ ±0.6℃Stabilization Time 15 minutes 25 minutes

Well Dia 25mm 25mm

Well Depth 110mm 190mm 110mm 190mm

Heating Time(to Max.) 20minutes 28minutes 20minutes 40minutes

Cooling Time(to 100℃) 45minutes 60minutes 60minutes 180minutes

Interchangeable Thermowell 1/4" & 1/2" Bore Dia standard

Switch Test Facility/Supply Provided / 5 V DC(open)

Power Consumption 500 W 1200 W 1400 W

Power Supply 220V AC / 50Hz

Dimensions(W×H×D) 160×330×350mm 160×330×450mm 160×330×350mm 160 x 365 x 450mm

Weight 7 kg 8.5 kg 8.5 kg 11 kg

Optional RS-232 Computer Interface & Calibration Software

Approval CE / DNV

Temperature Dry Block Calibrator

Models R-40 MP40R

Range -35℃ from Ambient to 123℃ -40℃above Ambient to 123℃Resolution ±0.1℃ ±0.1℃Accuracy ±0.5℃ ±0.3℃Stability ±0.05℃ ±0.05℃Stabilization Time 15 minutes 7 minutes

Well Dia 19mm 19mm

Well Depth 100mm 100mm

Heating Time(to Max.) Approx. 10 min 14 min

Cooling Time(to 100℃) 20 min 34 min

Interchangeable Thermowell Single hole to suit 1/4 & 1/2 Probes Single hole to suit 1/4

Power Supply 220V AC / 50Hz / 450 W 230VAC / 50Hz / 120W

Dimensions(W×H×D) 160×350×300mm 155×375×300mm

Weight 8 kg 10 kg

Optional RS-232 Computer Interface & Calibration Software

Sub-Zero Low Temperature Dry block Calibrator

|C

alib

rato

r

[ 42 ]

CalibratorProfessional Safety Solutions

Pneumatic & Hydraulic Pressure Calibrator

Pressure Calibrator

MPCE-P MPCE-H

Ranges -0.85 to 2 / 10 / 20 / 35 / 40 Bar 0 to 70 / 100 / 200 / 350 / 600 / 700 Bar

Accuracy ±0.1% F.S.

Resolution Minimum 4 1/2 digit

Display 2 line, 16 charactres LCD (Alpha-Numeric)

Engineering Units Mpa, Atm, Bar, Kg/cm2, mH2O, PSI, inHg, ftH2O, Kpa, inH2O, mmHg, cmH2O

mA Input 0-25mA DC

Pressure Switch Test Maximum 5V DC

Over Pressure Alarm 105% FS (Audio / Visual)

Matching Pumps Thro's Matching Pneumatic Hand Pump with fine adjustment Vernier & Release Valve

Battery Type & Life 9 Volts : Approx. 12 hours

Low Battery indication Provided

Dimension 480×260×150 mm

Weight 5 kg 7 kg

Approval DNV

|S

afe

ty Ap

pro

ved

Fla

shlig

hts

[ 43 ]

Safety Approved FlashlightsProfessional Safety Solutions

Safety Approved Flashlights

Lights Source Xenon

Batteries 2 C Alkaline (included)

Tested Lumen Value 22

Runtime 6h 45min

Beam distance 146m

Length 15.2cm

Weight with batteries 0.22kg

Approval IEC Ex, UL, FM, CSA

Lights Source LED

Batteries 2 AAA Alkaline (included)


Runtime 32 hours

Beam distance 13m

Length 15.7cm


Approval FM

Pocket Sabre 1820 L4 1830 LED

Lights Source Xenon



Runtime 1h 30min

Beam distance 45m

Length 10.4cm


Approval IEC Ex, CSA, ETL

Lights Source Xenon

Batteries 3 c Alkaline (not included)


Runtime 5 hours

Beam distance 158m

Length 19.8cm


Approval IEC Ex, UL, CSA, FM

MityLite 1900 SabreLite 2000

|S

afe

ty Ap

pro

ved

Fla

shlig

hts

[ 44 ]



Lights Source Recoil LED

Batteries 3 c Alkaline (not included)


Runtime 43 hours

Beam distance 74m

Length 20.6cm


Approval ETL

Lights Source Xenon

Batteries 4 AA Alkaline (included)


Runtime 3h 45min

Beam distance 125m

Length 16.5cm


Approval ETL, CSA, FM

SabreLite 2010 Recoil LED StealthLite 2400




Runtime 7h 15min

Beam distance 102m

Length 17.8cm


Approval IEC EX, ETL


Batteries 4 AA NiMH Rechargeable


Runtime 4h 15min

Beam distance 99m

Length 17.8cm


Approval FM

StealthLite 2410 Recoil LED StealthLite Rechargeable 2460

|S

afe

ty Ap

pro

ved

Fla

shlig

hts

[ 45 ]

Lights Source Krypton (Primary / Back-up)



Runtime 3h 30min

Beam distance 27m

Length 9.7cm


Approval FM, CSA

Lights Source 3 LED's



Runtime 19h (HI) / 47h (LOW)

Beam distance 28m(HI) /19m (LOW)

Length 3.8cm


Approval UL

HeadUp Lite 2600 HeadUp Lite 2610 LED

Lights Source Halogen(HIGH) / 3 LEDs (LOW)



Runtime 2h 45min (HI) / 17h (LOW)

Beam distance 46m (HI) / 20m (LOW)

Length 6.7cm


Approval CE Ex, UL

Lights Source LED



Runtime 1h 30min

Beam distance 81m

Length 7.1cm


Approval CE Ex, IEC Ex, SGS, QPS

HeadUp Lite 2640 HeadUp Lite 2690 LED

|S

afe

ty Ap

pro

ved

Fla

shlig

hts

[ 46 ]




Batteries 4 AA Alkaline


Runtime 7h 15min

Beam distance 102m

Length 19.1cm


Approval IEC Ex, ETL


Batteries 4 AA NiMH Rechargeable


Runtime 4h 15min

Beam distance 99m

Length 19.1cm


Approval FM

Little Ed 3610 Recoil LED Little Ed Rechargeable 3660 Recoil LED

Lights Source Krypton

Batteries 4 C NiCAD Rechargeable


Runtime 1h 45m (Primary) / 4h (Back-up)

Beam distance 133m (Primary) / 65m (Back-up)

Length 17.8cm


Approval UL

Lights Source Xenon

Batteries 8 D Alkaline (not included)


Runtime 11h

Beam distance 106m

Length 23.8cm


Approval FM, CSA

Big Ed Rechargealbe 3750 KingLite 4000

|S

afe

ty Ap

pro

ved

Fla

shlig

hts

[ 47 ]

Lights Source Xenon

Batteries 4 C Alkaline (not included)


Runtime 5h 15min

Beam distance 198m

Length 28.6cm


Approval IEC Ex, FM, CSA

Model 2117 2217

Power Source 2 D Alkaline

Bulb /Lamp Life 15 hours

Light Output 10,000 beam candlepower

Length 20.6cm

Weight without battery 0.13kg

Approval UL, ASTM & MSHA

Submersible N/A Waterproof

M10 8040 WorkSafe 2117 / 2217

Model 2124 2224

Power Source 3 D Alkaline



Length 25.1cm


Approval UL/CUL, ASTM & MSHA

Submersible N/A Waterproof

Model 2206

Power Source 6V Alkaline



Length 20.9cm


Approval UL/CUL, MASHA

Submersible Waterproof & floating

WorkSafe 2124 / 2224 WorkSafe 2206

|S

afe

ty Ap

pro

ved

Fla

shlig

hts

[ 48 ]



Model Responder Right Angle

Batteries Ni-Cad Rechargeable

Power supply 120V or 220V AC



Length 28cm


Approval ATEX, UL

Responder

LightHawk

Model LightHawk 4 cell

Batteries Lithium-Ion Battery pack

Power supply 120V-220V AC


Light Output 264 Lumens

Length 24.1cm


Approval UL, CSA

|C

am

era

CameraProfessional Safety Solutions

Intrinsically Safe Camera

[ 49 ]


Weight Approx. 200g

IP Rating IP 65

Power 2 x Alkaline AA batteries

Memory On board 1 Gbyte NAND flash

Image 3.1 Mega-Pixel (2048×1536 resolution)

Lens Fixed focus 1/4" format lens in plastic holder

Focal Distance 30 cm to infinity

View Finder Two element optical view finder

Connectivity USB 1.1 via mini-USB socket for use in the safe area only

Flash 4 LED flash giving 43.7 lux. Seconds of energy at 67ms exposure

Image format jpeg Approval ATEX, IECEx, FM

The iCAM 501 intrinsically safe digital stills camera is the perfect visulisation tool for use in hazardousareas. ATEX and IECEx certified, the iCAM 501 can be used in all sectors of industry includingChemical & Pharmaceutical plants, Oil & Gas production platforms, Refineries, Mining andEmergency Services to name but few.

iCAM 501

UCF 6000 UCF 7000


Weight 1,335g (incl.battery)

Display

Technology Liquid cristal display (LCD)

Size 9cm (3.5")

Housing

Protection cover Rubber material EPDM

Carrying loops High-temperature resistant material

Housing material High-temperature resistant material

Protection class IP 66 and 67

Infrared-specifications

Type of sensor a-Si Microbolometer Array

Resolution 160×120 Pixel

IR spectral 7 to 14㎛

Temperature sensitivity typically 0.035℃ ＜0.05℃ (nominal)

Picture frequency 50Hz 25Hz

Optics

Material Germanium

Focus From 1 m to infinity

Field of view Horizontal : 47' / Vertical : 32' / Diagonal 62'

Operation

Operation time with battery typically 4 hours

Operation temperature -40℃ to 85℃Approval ATEX ib T4 (Zone 1)

The Draeger UCF camera delivers excellent image quality even under the most extreme conditions. The user-friendly thermal imaging camera Draeger UCF series is characterized by easy of use andessential, innovative functions.The Draeger UCF 7000 camera is intrinsically safe (ATEX zone 1) and offers the maximum level of safetyand reliability in potentially explosive atmospheres.

Draeger UCF 6000 / 7000Thermal Imaging Camera

|F

ire D

ete

ctor Te

ster

Fire Detector TesterProfessional Safety Solutions

Fire Detector Tester

[ 50 ]

Model No. Products Description

330 Smoke Dispenser For testing detectors of up to

100mm in diameter

340 Smoke Dispenser For testing detectors of up to 133mm

in diameter

100 Telescopic Access Pole From 1.26m to 4.50m in 4 sections

for access up to approx. 6.00m

101 Extension Pole 1.13m length



200 Removal Tool For detectors of 65mm diameter up

to 110m diameter

A3 Smoke Test Aerosol 250ml Canister

C3 CO Test Aerosol 250ml Canister

A7 Detector Duster 250ml Canister

Smoke Detector Tester

Model No. Products Description

423 Heat Detector Tester Main powered 110VAC

424 Heat Detector Tester Main powered 220VAC

461 Heat Detector Tester Cordless Heat Tester



101 Extension Pole 1.13m length



725 Battery Fast Charger For use with Solo 461

760 Battery Baton Rechargeable NiMH Battery for use

with solo 461

Heat Detector Tester


Weight 2.1kg

Test range UV up to 8m in continue mode,

Flame detectors up to 4m in pulse mode

Test range IR and

UV/IR Flame detectorsup to 4m

Battery sealed Lead Acid battery, 12Vdc /2.8 Ah

Lamp H3, 12 Vdc/100W

Use 10-15minutes under optimal conditions and

continuous use

Housing ABS (plastic) black

Protection IP 30 /NEMA

The Sense-WARE T-229/4PFlame detector test lampactivates UV, IR and UV/IRFlame detectors that detectat 185-235nm UV and 4.4micron IR radiation.

Flame Detector Tester

•UL/ULC listed

•Detector manufacturer endorsed

•Non-flammable

•Oil-free formulation

•No lasting residue

•Fast activation and clearing time

The solo A3 is a clean synthetic aerosol that delivers particlesreplicating those found in real smoke to the detector. Provided in a250ml canister it is designed for use with the Solo 330 and 332dispensers.

A3 Smoke Detector

Professional SafetySolutions

www.finecomese.com

| Repair & Service

| Calibration Service listed items

| SERVICE CENTER

화인컴에스이㈜의 서비스 시스템은 풍부한 현장 경험과제조사들과의 기술 공유를 통해 최상의 서비스로고객 만족을 지향합니다.

We, Finecom Se, have the service system to aim thecustomers' satisfaction through sharing theinformation with Makers and highly field experiencedTechnician.

3F, Seo-Kang B/D, Choryang dong 1196-3, Dong-gu Busan, Korea

Tel : +82 51 465 8145 Fax : +82 51 465 8144

•Portable Gas Detector

•Fixed Gas Detection System

•Breath Alcohol Tester

•Self-Containd Breathing Apparatus

•Escape Emergency Breathing Devices

•Chemical Protection Suit

•Temperature measuring instruments

•Pressure measuring instruments

Head Office

710, Kranz-Techno Bldg., 5442-1, Sangdaewon-1dong, Jungwon-gu, Seongnam-city, Gyeonggi-do, Korea 462-730Tel : +82 31 749 6040(Rep.) Fax : +82 31 749 6044 E-mail : [email protected]

Busan Office

3F, Seo-Kang B/D, Choryang dong 1196-3, Dong-gu Busan, KoreaTel : +82 51 465 8145 Fax : +82 51 465 8144

Ulsan Office

202, Choeun Bldg., 558-10, Seonam-dong, Nam-gu, Ulsan, KoreaTel : +82 52 256 7567 Fax : +82 52 256 7569

http://www.finecomse.com

PROFESSIONAL SAFETY SOLUTIONS - Shipserv Ltd

Documents

Transcript of PROFESSIONAL SAFETY SOLUTIONS - Shipserv Ltd