Printing Process & Techniques

162
GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-1 Sample Name: ______________________________________________________________________________________ Explanation / Comment: ______________________________________________________________________________ ___________________________________________________________________________________________________ ___________________________________________________________________________________________________ Mounted sample area (Fold to fit if necessary. Nothing protruding beyond the page edges; tape (hinge) the sample on the left edge, toward the rings) Printing Process & Techniques Relief Printing—Letterpress

Transcript of Printing Process & Techniques

Page 1: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesRelief Printing—Letterpress

Page 2: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesRelief Printing—Block Printing

Page 3: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesRelief Printing—Flexography

Page 4: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesRelief Printing—Rubber Stamping

Page 5: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPlanographic Printing—Offset Lithography

Page 6: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPlanographic Printing—Collotype

Page 7: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPlanographic Printing—Spirit Duplication

Page 8: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPlanographic Printing—

Page 9: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesItaglio Printing—Engraving

Page 10: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesItaglio Printing—Rotogravure

Page 11: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesItaglio Printing—

Page 12: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-12

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPorous Printing—Screen Printing

Page 13: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-13

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPorous Printing—Mimeography

Page 14: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-14

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesPorous Printing—

Page 15: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-15

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—Color Laser Copy

Page 16: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-16

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—Color Ink Jet

Page 17: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-17

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—Xerography

Page 18: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-18

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—Direct Digital Printing

Page 19: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-19

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—Thermal Printing

Page 20: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-20

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—Dye Sublimation Printing

Page 21: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing Process & Techniques 1-21

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing Process & TechniquesNon-Impact Printing—

Page 22: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesStandard Duplicator Bond, Sub 20

Page 23: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesOffset Book Paper, Sub 70

Page 24: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesRag Content, % [indicate percentage, >20]

Page 25: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesWatermarked [indicate weight]

Page 26: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesCover, Coated One Side (c/1s)

Page 27: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesCover, Coated Two Sides (c/2s)

Page 28: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesDuplex Cover

Page 29: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesFelt Finish

Page 30: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesEmbossed Finish

Page 31: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesDeckle Edge

Page 32: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other Substrates3-part [or more] Carbonless Paper Set

Page 33: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-12

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other Substrates2-part [or more] Carbonless Tag Set

Page 34: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-13

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesChipboard

Page 35: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-14

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesCorrugated Board, 1-ply

Page 36: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-15

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesCorrugated Board, multiple-ply

Page 37: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-16

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesAdhesive Backed Label Paper [peel & stick]

Page 38: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-17

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesMoisture Activated Label [lick & stick]

Page 39: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-18

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesArtificial Paper [non natural fibers, not recycled]

Page 40: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-19

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other Substrates100% Recycled Paper, no virgin pulp

Page 41: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Paper and Other Substrates 2-20

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Paper and Other SubstratesNewsprint, Greater than 28#

Page 42: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsLine Art

Page 43: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsLine Screen, 133-lpi, single color

Page 44: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsLine Screen, 120-lpi, process color

Page 45: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsLine Screen, 85-lpi, single color

Page 46: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsHalftone, Ghost or Phantom

Page 47: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsMechanical Percentage Screen Tint, Process Color

Page 48: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsMechanical Percentage Screen Tint, Single Color

Page 49: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsSpot Color Printing, 2-color [not process]

Page 50: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsSpot Color Printing, 3-color [not process]

Page 51: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsSpot Color Printing, 4-color [not process]

Page 52: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary Effects6-color Printing (Process + 2 other)

Page 53: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-12

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsTrue Duotone

Page 54: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-13

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsFake Duotone

Page 55: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-14

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsLenticular Screening

Page 56: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-15

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsFoil-Stamped Hologram

Page 57: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-16

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsMezzotint Effect

Page 58: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-17

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsStraight Line Screen

Page 59: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-18

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsSteel Etch Effect

Page 60: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-19

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsVignette

Page 61: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-20

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsDropout

Page 62: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-21

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsSurprint

Page 63: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-22

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsCallout with Article

Page 64: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-23

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsTextured / Patterned Typeface

Page 65: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-24

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsConsecutive Numbering [at least 3]

Page 66: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-25

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsScoring or Creasing

Page 67: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-26

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsBlind Embossing

Page 68: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-27

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsPerforations

Page 69: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-28

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsDie Cutting

Page 70: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-29

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsHot Foil Stamping

Page 71: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-30

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsUV Coating

Page 72: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-31

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsThermography

Page 73: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-32

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsVarnish Coating

Page 74: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Printing and Auxiliary Effects 3-33

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Printing and Auxiliary EffectsZ-fold

Page 75: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyText Classification Letters [a full line]

Page 76: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographySerif Classification Letters [a full line]

Page 77: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyScript Classification Letters [a full line]

Page 78: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographySans Serif Classification Letters [a full line]

Page 79: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographySquare Serif Classification Letters [a full line]

Page 80: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyOccasional / Novelty / Decorative Letters

Page 81: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyIncursivve Classification Letters [a full line]

Page 82: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyCaps and Small Caps Letters [a full line]

Page 83: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyOutline Letters [a full line]

Page 84: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyMinuscules [6 consecutive lines]

Page 85: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyMajuscules [6 consecutive lines]

Page 86: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-12

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyCallout and Associated Article / Story

Page 87: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-13

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyBold Type [paragraph]

Page 88: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-14

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyHanding Indent [paragraph]

Page 89: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-15

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyHanging Initial [in paragraph]

Page 90: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-16

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyRaised Initial [in paragraph]

Page 91: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-17

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyDrop Cap [in paragraph]

Page 92: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-18

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyAll Serif Type [paragraph]

Page 93: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-19

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyRunaround Type [multiple paragraphs]

Page 94: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-20

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyIndent, Ragged Right Type [paragraph]

Page 95: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-21

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyIndent, Ragged Left Type [paragraph]

Page 96: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-22

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyCentered Type [paragraph]

Page 97: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-23

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyJustified Type [paragraph]

Page 98: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-24

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyLigatures

Page 99: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-25

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyRunning Sides [3 consecutive full page samples]

Page 100: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-26

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyRunning Feet [3 consecutive full page samples]

Page 101: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-27

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyRunning Heads [3 consecutive full page samples]

Page 102: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-28

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyDingbats [5 samples from 5 separate printed sources]

Page 103: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Type & Typography 4-29

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Type & TypographyLogotypes [6 samples from 6 separate printed sources]

Page 104: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Line

Page 105: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Color

Page 106: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Texture

Page 107: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Shape

Page 108: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Form

Page 109: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Value

Page 110: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionComposition Principle—Size

Page 111: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionLayout Design Principle—Emphasis

Page 112: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionLayout Design Principle—Contrast

Page 113: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionLayout Design Principle—Balance

Page 114: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionLayout Design Principle—Alignment

Page 115: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-12

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionLayout Design Principle—Repetition

Page 116: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Layout Design & Composition 5-13

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Layout Design & CompositionLayout Design Principle—Flow

Page 117: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryGestalt Theory

Page 118: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryIconic Semiotic

Page 119: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryIndexical Semiotic

Page 120: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheorySymbolic Semiotic

Page 121: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryConstructivism Theory

Page 122: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryEcological Theory

Page 123: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryCognitive Theory

Page 124: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryHuxley / Lester Model

Page 125: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Visual Communications Theory 6-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Visual Communications TheoryOmniphasism

Page 126: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesException to Freedom of Expression—Obscenity or Defemation

Page 127: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-2

Sample Name: ______________________________________________________________________________________ _____________________________________________________________________________________

Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesException to Freedom of Expression—Breach of the Peace, Incitement to Crime, “Fighting Words” or Sedition

Page 128: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesPhoto Manipulation That Changes Message/Truth

Page 129: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesPhoto Requiring a Model Release

Page 130: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesExample of a Compilation Requiring Licensing

Page 131: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesExample of an Ethically Acceptable Photo Manipulation

Page 132: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-7

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesCopyright / Trademark Violations—Using Music, Video, Movie, or Animation

Sample Name: ______________________________________________________________________________________ _____________________________________________________________________________________

Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Page 133: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-8

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesCopyright / Trademark Violations—Using Fonts, Artwork, or Photo(s)

Sample Name: ______________________________________________________________________________________ _____________________________________________________________________________________

Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Page 134: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesTrademark Usage by Non-registeree

Page 135: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesAn Example of Commercial Fair Use

Page 136: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Legal & Ethical Issues 7-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Legal & Ethical IssuesAn Example of a Certification Mark Requiring Licensing

Page 137: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaWeb Technologies—Search Engines [6 exmples]

Page 138: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaWeb Technologies—SEO [2 examples]

Page 139: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaWeb Technologies—Flash-based Web Site [2 examples]

Page 140: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaWeb Technologies—Web Application [interactive form]

Page 141: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Blogs [6 examples]

Page 142: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Microblogging [4 examples]

Page 143: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-7

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Social Networking [4 examples]

Page 144: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-8

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Social Network Aggregation [2 examples]

Page 145: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-9

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Instant Messaging

Page 146: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-10

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Podcasting

Page 147: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-11

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCommunication—Satellite Radio/Web

Page 148: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-12

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCollaboration—Wikis [2 examples]

Page 149: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-13

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCollaboration—Social Bookmarking [4 examples]

Page 150: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-14

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaCollaboration—Social News [4 examples]

Page 151: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-15

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaMultimedia—Photo Sharing [4 examples]

Page 152: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-16

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaMultimedia—Video Sharing [2 examples]

Page 153: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-17

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaMultimedia—Live Casting [2 examples]

Page 154: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-18

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaMultimedia—Audio / Music Sharing [4 examples]

Page 155: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-19

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaEntertainment—Virtual Worlds [2 examples]

Page 156: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK New Media 8-20

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

New MediaMultimedia—Game Sharing [2 examples]

Page 157: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Miscellaneous 9-1

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

MiscellaneousSaddle-stitching

Page 158: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Miscellaneous 9-2

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

MiscellaneousSide-stitching

Page 159: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Miscellaneous 9-3

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

MiscellaneousPerfect binding

Page 160: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Miscellaneous 9-4

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Miscellaneous

Page 161: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Miscellaneous 9-5

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Miscellaneous

Page 162: Printing Process & Techniques

GRC 101 Semester Project—SAMPLE BOOK Miscellaneous 9-6

Sample Name: ______________________________________________________________________________________Explanation / Comment: ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Mounted sample area(Fold to fit if necessary. Nothing protrudingbeyond the page edges; tape (hinge) thesample on the left edge, toward the rings)

Miscellaneous