5/28/2018 Pricelist_PUK04_01.04.2013

1/3

Lampert Werktechnik GmbHwww.Lampert.info 1

PRICELISTPUK PRECISION WELDING DEVICES AND ACCESSORIES

In Euro, ex works, excl. V.A.T and shipping costs (valid from 01.04.2013)

444 010 PUK 04 and welding-microscope SM04 3.390,00 Includes: hand piece, 10 special electrodes 0,5mm incl. diamond grindingwheel , 2 crocodile clips, soldering tweezers, brush (with brass wire) surfacecompactor, 3 m gas hose

Welding microscope SM04 includes: electronically controlled eye-protectingfilter (Luminescence DIN3 / Obscurity DIN11), 10x magnification, LED-lighting 3W, and hand piece holder. Adjustable in pitch and complete withhand rests.

100 600 PUK Flow Regulator 83,00 For Argon gas, flow rate 0 6 L/min. Specially matched and optimized foruse with all PUK precision welding devices.

Available for: D N/DK S/NL GB IT F/E R/GUSAvailable for other countries on request.

100 850 Foot Switch 38,70 Available as an optional accessory for the PUK 3s and PUK 04

200 250 Pivoting Arm 395,00 For the welding-microscope SM04.Includes: an adjustable supporting stand and arm, milled from solidaluminium and pivot adjustable in pitch

The Pivoting Arm is the ideal add-on for the SM04 microscope, and allows ahigh level of flexibility and freedom-of-movement when working

200 217 Headrest 49,00 for mounting on the welding microscope (from 05.2013)Consisting of individually adjustable headrest and replacement felt

5/28/2018 Pricelist_PUK04_01.04.2013

2/3

Lampert Werktechnik GmbHwww.Lampert.info 2

200 218 Headrest 58,00 for mounting on the welding microscope (until 05.2013)Consisting of individually adjustable headrest and replacement felt

100 510 Absorber 115,50 Connects to the PUK 04Includes: 1 replacement Active Carbon Filter

100 400 Special electrodes 28,50 10 pieces 0,5mm - contains no Thorium oxide (non radioactive) 0,5 x 50mm.Includes: 1 diamond grinding wheel.

300 800 Desk-stand 115,40 Includes: an arm for holding the hand piece, welding-table (as a base) andsteel bar (as a support).The desk-stand holds the PUK hand-piece securely and allows freehandwork.

300 811 Third Hand Assistant 148,00 Holds work pieces securely.Includes: a clamp for holding the work piece, welding-table (as a base) andsteel bar (as a support).

200 200 Welding-microscope SM04 920,00 Includes: electronically controlled eye-protecting filter (Luminescence DIN3/ Obscurity DIN11), 10x magnification, LED-lighting 3W, and hand pieceholder. Adjustable in pitch and complete with hand rests.

Using the SM04 welding microscope when welding means that high-qualitywelds can be easily produced and hence, outstanding results become reality.Only the user who really sees" what is happening during the welding

process, can actively control the results produced or successfully modelmetal.

5/28/2018 Pricelist_PUK04_01.04.2013

3/3

Lampert Werktechnik GmbHwww.Lampert.info 3

100 200 Optic unit 484,00 A magnifying glass equipped with magnification 1,75x (3dpt), glare-freelamp, electronically controlled eye-protecting filter (Luminescence DIN3 /Obscurity DIN11), 9 W bulb, welding table and an arm for holding the handpiece.

The PUK Optic unit is especially handy for large work pieces that don't fitunder the microscope.

100 823 T-connector optic 16,50 Allows the optic-unit and microscope to be connected to the PUK at thesame time.

100 855 Electrode grinding motor 124,90 (including T-connector and diamond grinding wheel)

Suitable for the connection to PUK04 and PUK 3s devices as of year 2011

100 856 Electrode grinding motor including wall power supply 124,90 (wall power supply for use from 110V up to 230V mains voltage)

For use combined with PUK welding devices produced before year 2011