Piggy bank safe - media.prusaprinters.org · Piggy bank safe with a hole on the top for putting...
5
21.87 hrs 5 pcs f 0.20 mm 0.10 mm k 0.40 mm h 1 270.00 g d MK3/S Summary Piggy bank safe with a hole on the top for putting money and the twisting mechanism for accessing the money. Gadgets > Portable devices safe piggybank moneyholder moneybox money Model has been taken apart so it would not need supports. Number pad comes in 3 variants a full pad with numbers and buttons to do a color changes, pad with the buttons and the numbers on the side, and all 3 separately. Only the cover.stl requires supports on the little flaps. I added a .gcode with my color changes if you want to thy that out. digital_craft_architecture Piggy bank safe VIEW IN BROWSER updated 21. 3. 2020 | published 21. 3. 2020
Transcript of Piggy bank safe - media.prusaprinters.org · Piggy bank safe with a hole on the top for putting...
21.87 hrs
5 pcs
f
0.20 mm0.10 mm
k
0.40 mm
h
1
270.00 g
d
MK3/S
Summary
Piggy bank safe with a hole on the top for putting money and the twistingmechanism for accessing the money.
Gadgets > Portable devices
safe piggybank moneyholder moneybox money
Model has been taken apart so it would not need supports. Number padcomes in 3 variants a full pad with numbers and buttons to do a colorchanges, pad with the buttons and the numbers on the side, and all 3separately. Only the cover.stl requires supports on the little flaps. I added a.gcode with my color changes if you want to thy that out.
digital_craft_architecture
Piggy bank safe
VIEW IN BROWSER
updated 21. 3. 2020 | published 21. 3. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
354.3 KB
3.12 hrs f 0.20 mm k 0.40 mm h PLA 55.00 g d MK3/S
updated 21. 3. 2020
693.1 KB
0.74 hrs f 0.10 mm k 0.40 mm h PLA 4.30 g d MK3/S
updated 21. 3. 2020
1.0 MB
1.23 hrs f 0.10 mm k 0.40 mm h PLA 10.90 g d MK3/S
updated 21. 3. 2020
1.3 MB
1.10 hrs f 0.10 mm k 0.40 mm h PLA 4.90 g d MK3/S
updated 21. 3. 2020
2.5 MB
15.68 hrs f 0.20 mm k 0.40 mm h PLA 195.10 g d MK3/S
updated 21. 3. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
3.1 KBupdated 21. 3. 2020
32.8 KBupdated 21. 3. 2020
28.7 KBupdated 21. 3. 2020
mk3_pla-bottom-plate.gcode
mk3_pla-buttons-with-numbers-and-base-plate.gcode
mk3_pla-cover.gcode
mk3_pla-front-shaft.gcode
mk3_pla-body-of-the-safe.gcode
bottom-plate.stl
stl.
1.stl
174.0 KBupdated 21. 3. 2020
122.8 KBupdated 21. 3. 2020
14.3 KBupdated 21. 3. 2020
113.6 KBupdated 21. 3. 2020
65.5 KBupdated 21. 3. 2020
167.9 KBupdated 21. 3. 2020
41.0 KBupdated 21. 3. 2020
203.6 KBupdated 21. 3. 2020
149.9 KBupdated 21. 3. 2020
9.stl
0.stl
4.stl
2.stl
star.stl
3.stl
7.stl
8.stl
body-of-the-safe.stl
166.9 KBupdated 21. 3. 2020
630.7 KBupdated 21. 3. 2020
52.1 KBupdated 21. 3. 2020
98.3 KBupdated 21. 3. 2020
1.4 MBupdated 21. 3. 2020
1.2 MBupdated 21. 3. 2020
2.4 MBupdated 21. 3. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
6.stl
cover.stl
base-plate-with-buttons.stl
5.stl
front-shaft.stl
buttons.stl
buttons-with-numbers-and-base-plate.stl
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
