PE_WELD
-
Upload
sangeethkp -
Category
Documents
-
view
223 -
download
0
Transcript of PE_WELD
-
8/3/2019 PE_WELD
1/2
Product Description & Function
The Welding Pig is a special pig developed by PE to seal
the ends of pipes. This pig allows pipe welding to be
carried out prior to laying land based pipelines or on
vessels prior to placement subsea.
The Welding Pig is used to create an inert atmosphere in
the pipe so that welds can be carried out.
PEs Welding Pig is suitable for pipe sizes from 8 and
above.
PL/WP/01
Features
> Single module tool
> High strength steel body
> Fitted with PEs Omnithane polyurethane inflatable sealing tyres
> The two separate sealing tyres are inflated independently for maximum integrity
> Unique sealing tread which is pushed against the pipe wall in a dual action to both seal and grip the pipe
Welding Pig positioned in pipeline
8 standard steel Welding Pig
CAD image - Welding Pig
Engineered Solutions for the Pipeline Pigging and Flow Assurance Industry
PIPELINE ENGINEERING
In-s i tu p ipe sea l ing capabi l i ty
Welding Pig
ads 4544 PE WELD 15/5/07 16:27 Page 1
-
8/3/2019 PE_WELD
2/2
Pipeline Engineering
Gatherley Road
Catterick Bridge
Richmond, North Yorkshire
DL10 7JQ United Kingdom
Tel: +44 (0) 1748 813 000
Fax: +44 (0) 1748 813 501e: [email protected]
w: www.pipelineengineering.com
Copyright Reserved Pipeline Engineering & Supply Co. Ltd 2007PL/WP/01
Benefits for Operators
PEs Welding Pig provides many benefits:
> Easy to insert into pipes
> Easy to remove when either mid-line or end-line tie-ins are completed
> All required work can be completed onsite
> Suitable for refurbishment and reuse leading to significant cost savings
Design, Development and Testing
Engineering expertise is used to design, test and
build the Welding Pig to meet the exact
requirements of the pipeline where it will be used.
Computer aided design capability is used to
develop the Welding Pig and if required, prototype
pigs can be tested in purpose built test loops.
On-site Services
Our Engineering Team isavailable to provide support
services worldwide. All our
engineers are fully certifiedand trained for onshore and
offshore operations.
Insertion, Operation and Removal
The Welding Pig is positioned in the pipeline and
the sealing tyres are inflated with water or air using a
connector hose to inflate the tyre connection to hold
up to 2 bar differential pressure.
When the required welding has been completed, the
Welding Pig can be pigged or pulled from the
pipeline.
PE works with its clients to ensure all operational
requirements are met in the functionality of the
Welding Pig.
8 and 10 Welding Pigs
ads 4544 PE WELD 15/5/07 16:27 Page 2