MotoArt

1

u Desks Pg 3 - 6u Cowling Desks Pg 7 - 8u Conference Tables Pg 9 - 12u Reception Desk Pg 13u Seating Pg 14 - 16u Credenza Pg 17 - 18u Coffee Tables Pg 19 - 24u Other Tables 25 - 27

u Misc. Pg 27 - 28u Mirrors / Sconces Pg 29-30u Room Dividers Pg 31-32u Room / Office Pg 33 - 34u Artwork Pg 35 -38u Custom Projects Pg 39 - 40u Moto Life Pg 41 - 44u Aircraft Pg 45 - 46

Table Of Contents

MotoArt welcomes you to our 2009 catalog. Whether you’ve been following our work for ten years or you are new fan to our art, we have numerous new additions to our series that we are pleased to share. Each of our authentic series pieces are limited editions based on the available air frame parts that we can secure.

Our once small business has now blossomed into an international affair. Over 50% of our hand crafted art pieces are now shipped overseas to far away locations as Russia, Japan, Australia, Asia, The Middle East and throughout the European continent.

Our client base for corporate work has also increased dramatically. We are pleased to introduce new partnerships with companies in our portfolio including Spyker Cars, The Boeing Company, Lockheed Martin, Kaiser Hospitals, Microsoft, and Disney.

Please feel free to visit our web site for more information and detailed photographs of our products. Each month we continue to introduce a new limited edition series. To stay current with our work just subscribe to our monthly newsletter by sending us an e-mail at [email protected]

Blue Skies,

Dave & Donovan

MotoArt - Saving History One Piece At a TimeWe would like to share some of the most common questions that we receive at MotoArt in this introduction. Listed below are some of these questions with our answers. Hopefully this will better give some insight into MotoArt.

Where does Motort get their parts? We find our inventory all over the world. Different yards specialize in different aircraft. Most commercial aircraft parts come from the deserts in California and Arizona. However the older, more vintage parts are typically found in isolated locations.

Isn’t there an abundance of old airplanes out there? Yes, and no. Since 9/11, the US Government changed the laws about decommissioned parts. You can no longer obtain old military aircraft. Everything that leaves our Government bases must be scrapped in very small sections, making it all unusable. Any fighter, bomber or US Cargo airplane part that we use is being pulled from a pre-9/11 pile. These piles are growing smaller each day. Commercial Aircraft are available because the FAA requires them to be decommissioned after so many cycles of take off & landings.

How & when did MotoArt start? Dave & Donovan who founded MotoArt, worked together in the 1990’s as architectural sign guys. They did high-end theme work for large entertainment parks and sporting venues. One day the scrap aluminum truck came by and he had an old beat up B-17 propeller in back of his truck. Donovan rescued it and created the first Propeller Sculpture. The rest is history.

Didn’t I see this stuff on TV one time? Yes, MotoArt did a television series called Wing Nuts back in 2004 for Discovery Channel. Eight one-hour episodes were produced based on our work. Unfortunately it ended when our good friend and partner Tim Roberts passed away from a heart attack. You can still find Wing Nuts airing in all parts of the world besides the US.

What type of clients does MotoArt have? MotoArt clients are some of the most diverse we ever could have imagined. From top celebrities, Fortune 500 companies, self made people who reward themselves, to young adults who save money for years to buy one of our pieces.

Why are MotoArt products so expensive? In actuality they’re not considering the process our pieces must go through to look so good. Great cost goes into procuring the parts by finding; removing them and shipping them back to our studios. Also �process also entails the tedious process of sanding and polishing each piece that sometimes leads to hundreds of hours work.

Why do you call yourself MotoArt? MotoArt was originally started to preserve all works of recycled engineered parts from �of industrial art.

How many pieces have you designed? To date, MotoArt has designed and fabricated nearly a hundred different series of recycled functional art.

2

Fly through your workday with a DC-9 Wing Desk. This piece is fabricated from a DC-9 “T” tail stabilizer. Surfaces are sanded and polished to a mirror finish. The legs are 1/2”-machined aluminum, powder coated black chrome with polished aluminum face plates. Our standard length is 8’, but the DC-9 may be ordered cut to suit your space up to 20’ long. End surfaces are finished with 1/2” green glass Plexiglas. The back surface is finished with 3/4” black stained hardwood. Each piece is available with an optional 1/2” glass top supported by 1” machine polished aluminum stand-off’s.

DC-9 DESK

Desks

3

WWW.MOTOART.COM

MotoArt, LLC Torrance Airport 23940 Madison Street, Torrance, CA 90505 Tel: (310) 375 - 4531

Aviation history is alive when you pilot the C-130 Desk. Designed using the C-130 outer flap. The original dimensions of 24’-0” x 4’-0” can be cut to meet your own personal space. 1’ clear Plexiglas stand off’s support 1/2” glass to allow viewing the exquisite rivet and track detail of this piece. Machined and powder coated aluminum “I” beam legs support this beautiful desk.

C-130 OUTER FLAP DESK

4

Be one of the lucky few to own a B-25 Bomber Desk. This very limited edition series consists of Rudders and Elevators from the famous “Mitchell” bomber. The skeleton aluminum frame once hidden by cloth is now clearly visible and beautifully finished with a metallic powder coat color of your choice. The desk surface is 1/2” tempered glass with polished edges following the outline of this rare piece. The base and legs are designed to compliment the unit and are available in hardwood stained and clear coated to your specifications.

B-25 BOMBER DESK

Desks

5


WWW.MOTOART.COM

Steer past the ordinary with the Fairchild C-119 Rudder Desk. Designed and constructed with an authentic 1950’s C-119 rudder that has been stripped of it’s cloth exterior, powder coated and mounted on custom hardwood legs. The frame is covered with 1/2” tempered glass that highlights the construction detail of these amazing frames. Custom colors and laminates available on the leg design to accent your home or office décor. A limited edition of 40 units available. Each unit is complete with original manufactures tags to authenticate your piece. Available in 8’4” length or 11’ configurations.

C-119 RUDDER DESK

From the side, this is a masculine unit showing the true girth of these control services. All aged surfaces are finely sanded and are beautifully mirror polished to accent the rivet detail. This fine piece is supported by 4” x 8” architectural aluminum I-beams. The leg units have machined radiuses and are powder coated with a black wrinkle finish. The wide area work surface is topped with 3/8” tempered glass following the contoured outline of the desk.

C-119 FLAP DESK

6

MidnightBlack

BlackChrome

ReflectiveSilver

CandyRed

PrismaticBlue

*MetallicOrange

GrannyGreen

MetallicPurple

Jumbo size your reception area with our 747 Cowling Desk. These hard to find engine cowlings are 105” in diameter. The finish is a sanded and mirror polished aluminum surface. An average of 2 or 3 of these jumbos come off the line every year, so availability is extremely limited. We maximized the workspace on this Cowling by designing a hardwood desktop and lower shelf system with a 3/8” black glass working surface.

LIMITED EDITION747 COWLING RECEPTION DESK

Cowling Desks

7

WWW.MOTOART.COM

Fabricated from a Boeing 727 cowling nacelle that once covered the Pratt &Whitney JT8D engines with 14,000 pounds of thrust , is now elegant enough to put in your home or office. Sanded and polished to a mirror finish, with a black stained hardwood desktop, and topped with 1/4” glass. The cowling comes with optional 1/4” casters, elevating the desktop for a stand-up workstation.

727 VALET DESKFuel your need to own a piece of aviation history by being one of the lucky few to own a KC-97 Cowling Desk. The KC-97 was first produced in 1950 as a transport version of the B-29 Bomber and primarily used as a strategic tanker aircraft for the USAF. MotoArt has modified the cowlings by using two of the three sections of the full engine cowl, to create a sleek custom desk. Each has a stained and clear coated hardwood desk top, black coated interior, and a highly polished exterior finish. Also available in Hand Rubbed Satin finish.

KC-97 COWLING DESK

MotoArt, LLC Torrance Airport 23940 Madison Street, Torrance, CA 90505 Tel: (310) 375 - 4531 8

Start off any business meeting with a conversation piece that may accidentally dominate your conversation. The 14’ DC-4 Conference Table is beautifully completed with the combination of mirror polished leading edges and a vibrant powder coated treatment. The underside paneling is finished with turned aluminum and the frame is accented with red LED lighting. The legs are dual aluminum I-beams fused together and powder coated, completed with polished aluminum end caps. Also available in DC-6 and DC-3 rudders.

DC-4 CONFERENCE TABLE

Conference Tables

9

PrismaticBlue

MidnightBlack

BlackChrome

ReflectiveSilver

CandyRed

*MetallicOrange

GrannyGreen

MetallicPurple


WWW.MOTOART.COM

Let your imagination soar as you sit behind a magnificent C-130 Conference Table. At 12’-0” long x 63” wide, the flap dimensions are truly impressive. The ends and internal mounting points are powder coated in wrinkle black to match the custom fabricated “I” beam legs. The 1/2” tempered glass top is supported by 1” thick Plexiglas stand-offs, allowing a complete view of the rivet detail and mirror polished aluminum finish.

C-130 INNER FLAP CONFERENCE TABLE

10

After 30 years of service, the Boeing 727 can now land in your conference room. This impressive horizontal stabilizer is BIG. The unit is cut at 15’ in length with plenty of width to fill up the boardroom. The combination of mirror polished finish and a epoxy painted surface makes it look factory fresh. Topped with 1/2” tempered glass and dual aluminum I-beam legs, it is sure to land you at least another 30 years of service.

727 CONFERENCE TABLE

Conference Tables

11

WWW.MOTOART.COM

Make a historic statement at your next boardroom meeting with your Aileron Conference Table. Created by using two tapered skeleton wing ailerons that are de-clothed and powder coated with brilliant color to accent the frame. Maximum leg clearance is achieved by using ailerons tapered outwards. The 1/2” tempered glass top can be cut in either a rectangular shape, or follow the contour of the ailerons. Shown with optional decorative engine turned aluminum under paneling. The Aileron Conference Table comfortably seats ten people.

C-119 AILERON CONFERENCE TABLE


PrismaticBlue

MidnightBlack

BlackChrome

ReflectiveSilver

CandyRed

*MetallicOrange

GrannyGreen

MetallicPurple

Reception Desk

Your client’s spirits will soar at the sight of MotoArt’s Wingman Reception Desk. Fabricated from three DC-9 stabilizers and tastefully assembled with glass, hardwood and perforated aluminum. All aluminum components are sanded and mirror polished. All wood surfaces are stained and clear coated. The front fascia surface is perforated aluminum framed with hardwood. The desk surface is protected with 1/4” black glass. The reception surface is 1/2” clear glass with obscured sub surface diamond etching. This desk can be created to your personal specifications. Shown at 94”L x 45”H x 51”W

WINGMAN RECEPTION DESK

13

Seating WWW.MOTOART.COM


Don’t like what you’re hearing in the office, pull the lever and abort with the B-52 Ejection Chair. Designed with sporty red upholstery, detailed painted handles and powder-coated metal base with heavy-duty casters. Available in downward and upward ejection seats that were used on both decks of the B-52.

B-52 EJECTION CHAIRFly into the new year with the C-130 Navigators Chair. These limited edition seats are each restored, with red racing upholstery, anodized aluminum base plates and low profile casters. The C-130 Navigator Chairs give you additional movement that you won’t find with our aircraft seats including reclining, up & down and light weight enough to scoot around in.

C-130 NAVIGATORS CHAIR

14

Drift away with the Albatross Couch. Designed with an Albatross Float Tank that has nautical lines with tons of rivet detail. This lucky pontoon was rescued from the bone yard and now starts its new life as an incredible, extremely limited MotoArt couch. Weeks of sanding, polishing, stitched red upholstery and a lot of love completes this rare piece.

ALBATROSS FLOAT TANK COUCH

15

Seating


The F-4 Ejection Bar Stool that is designed using the original bucket seat from an F-4 Phantom Jet Fighter. Our workmanship includes utilizing the original paint with highlighted accents and high performance upholstery. The F-4 ejection seat is supported by custom fabricated aluminum legs that are powder coated Reflective Silver.

F-4 EJECTION BARSTOOL

Break the sound barrier without ever leaving your office with the F-4 Ejection Seat. Our low riding F-4 chair has a custom fabricated aluminum base that is powder coated wrinkle black, with double wheel casters. The seat bucket is designed with either a racing red upholstery or your favorite color to match your décor. The authentic F-4 bucket seat has been left in original condition to reflect this Vietnam era bird.

F-4 EJECTION SEAT

16

WWW.MOTOART.COM

Creating a new credenza has never been more plane cool. Using a C-119 Aileron and a Boeing 707 Damper Valve, MotoArt designed this credenza with custom wood cabinetry, turned aluminum laminate, internal illumination with florescent & LED lighting, topped with 3/8” polished edge tempered glass. This beautiful piece originally photographed, flew to the old Grumman Factory in New York for it’s final flight.

C-119 CREDENZA

Credenzas

17


Designed and fabricated featuring two RB-211 Rolls Royce Engine Tail Cones. Originally used to cap the flame thrust of this wide-body jet engine. Encased within an internal steel frame, the cabinetry features finely handcrafted Australian Lacewood doors. The credenza sits on machined aluminum feet fashioned to replicate the look of pistons. The credenza top is finished with brushed aluminum laminate and glass.

L1011 CREDENZA

For the person on the go we present our Galley Cart Credenza. Fitted with original brakes, this credenza is happy in a stationary position or ready to roll when you are. Completed with two diamond plated airline beverage carts connected with custom machined aluminum “I” beams. The shelf surfaces are 3/8” tempered glass with flat polished edges.

GALLEY CART CREDENZA

18

WWW.MOTOART.COM

Coffee Tables

This table will definitely leave you and your friends spinning. The Jet Spinner Table is a beautiful illuminated piece that includes a titanium L1011 spinner and a mirror polished propeller gear dome. It illuminates softly through a bottom plate, a top plate and a red Plexiglas eye.

L1011 SPINNER TABLE

19


WWW.MOTOART.COM

Let the good times roll with the Boeing 707 Wheel Table. This great looking table stands at 18” high and is topped with 3/8” tempered glass 40” in diameter. Each unit is hand sanded and polished with the Boeing insignia hubcap in black.

707 WHEEL TABLE

20

Coffee Tables

21

CONTINENTAL RADIAL ENGINE COFFEE TABLELadies and Gentlemen, start your engines! Introducing our 1930’s Continental Radial Engine Coffee Table. Be one of the lucky few to own this spectacular piece that is available in a very limited edition. It is sure to be the most outstanding conversation piece in your home, office or hangar. The Radial Engine Coffee Table comes in pristine condition, completely rebuilt with original parts and colors.


The inside of a Radial Engine never looked so good. Detailed with aluminum parts that are painstakingly polished, with chrome plated steel gears and gold plated bronze bearings.The complicated internal workings of this engine will be a compliment to any art collection, office, hanger or home. Offered in a very limited edition.

JACOBS RADIAL ENGINE TABLE

Control the direction of your style with the Douglas Pedal Table. This table is designed and fabricated from the very rare Douglas C-133 aircraft. A total of 15 units available in this series. Each table is completely dismantled to the last bolt, then restored to a museum quality finish. Custom colors are available to match your decor. The table comes complete with a 28” x 1/4” tempered glass top and stands at 22.5”

DOUGLAS PEDAL TABLE

22

WWW.MOTOART.COM

Coffee Tables

23

Land yourself a new table with the C-119 Landing Gear Door. Each beautifully polished piece accents the rivet detail of the original construction, the air scoop is capped with aluminum perforated metal, and each custom piece is cut to your specified length. The C-119 Table comes complete with 3/8” tempered glass and standoff’s. Table shown is 5’ in length x 32” in width. These are a very limited edition with this style air scoop.

C-119 COFFEE TABLE


WWW.MOTOART.COM

Originally designed for efficient airflow and maximum control for the DC-9 “T” tail, MotoArt gives them new life as the Wingman Coffee Table. These sleek polished aluminum units have been cut into 20” high sections to create a unique coffee table base. This product is sold without glass for a big cost savings in shipping. Recommended with a 48” to 60” diameter or oval glass top that can be purchased at any local glass company.

DC-9 WINGMAN COFFEE TABLE

The B-52 Spinner is a deco style piece that looks “plane” cool. This design is fabricated from an aerodynamic nose assembly gear box cover that protruded from each of the eight Pratt & Whitney J-57 jet engines. The spinner and 3/8” aluminum supports are mirror polished. The tempered glass is 3/8” thick and is available in your choice of diameters up to 40”.

B-52 SPINNER TABLE

24

Tables

25

Lift yourself out of the norm with the Sikorsky S-58 Composite Cooling Fan. The S-58 was one of the largest helicopters with a radial piston engine. Built in the 1950’s and primarily used for the US Navy for Satellite recovery. Motoart has taken S-58 Fan Blade to new heights, creating a unique table top that is complete with an RB-211 Engine Shaft for the table support. Stands at 30” with a 49” - 56” glass top.

SIKORSKY TABLE


The RB211 Table received its name from the Rolls Royce Engine off the L1011 that we use the shaft from. It is now creatively used as the stand to elevate the jet engine turbine fan tabletop and covered with tempered glass. The RB211 Table has the raw look of machined metals and has thrilled the audiences from home to abroad.

RB211 TABLE

Propel your libations with the DC-3 MartiniTable. Designed and fabricated with a DC-3 “toothpick” propeller and a C-130 Hercules gear dome base. These mirror polished units sandwich a 3/4” thick glass top and a 3/4” thick Plexiglas bottom, both of which are illuminated and edge lit through an internal light source. The top and bottom 3/8” aluminum mounting plates are grained and anodized. The anodized finish is available in several colors.

DC-3 MARTINI TABLE

26

Blow your friends away with the MK-84 Aqua Bomb. This piece will compliment your environment and will add a little tranquility to any home or office. Fabricated with an MK-84 bomb tail fin assembly, a 10-gallon Plexiglas fish tank and a spun aluminum dome cap. Standing at 80” tall, the AquaBomb is completely self-contained with a built-in pump, filter and lighting. Fish not included.

MK-84 AQUA BOMB

The Blockbuster Bomb Tables are constructed from deactivated MK-84 tail fin assemblies. Each is internally illuminated and is topped with 3/8” thick tempered glass in 40” diameter. A 1/2” stainless steel bolt secures the glass to the bomb base. Finishes include the original rusted look or choose from a variety of powder-coated colors.

MK-84 BLOCKBUSTER BOMB TABLE

MK84 Bombs

PrismaticBlue

MidnightBlack

BlackChrome

ReflectiveSilver

CandyRed

*MetallicOrange

GrannyGreen

MetallicPurple

27


WWW.MOTOART.COM

This original windscreen is from our first operational front line fighter. Perfect for a laptop surround, to help you fight the daily grind.

F-80 FIGHTER WINDSCREEN

The Airline GalleyBar’s are the perfect addition to any fun or retro theme room. Each is available with optional decorative aluminum plating, custom made drawers, including ice bucket, wine & can rack, wood cutting board, cash drawer and of course, locking brakes.

AIRLINE GALLEY BAR

Misc Items

28

These Boeing 707 engine cowls will be a dramatic statement on any wall. These 1950’s era nacelles are hand sanded and polished to a mirror finish accenting the sensuous lines of the dual air intakes. The dimensions of this unit are 56” wide and 32’ deep. Wall mounted brackets are provided. The B-52 Mirror fits nicely in these units for added refection and depth. Each unit sold separately

707 COWLING MIRRORLight up your skies with the beautiful B-52 Mirror. Each piece is powder coated in reflective silver measuring out at 36” in total diameter and centered with a 20” mirror with backlit internal illumination. Each piece is easy to mount with all attachments included. Choice of backlighting in gold, blue, green, red and clear illumination.

B-52 STRATOFORTRESS MIRROR

Mirrors

29

Wall Fixtures WWW.MOTOART.COM


Light up your way with a DC-9 Wall Sconce. Designed with “jackscrew” access door that is mirror polished and illuminated with 110 volt lighting. Only one available per aircraft, so if you need a dozen, you better start laying off some pilots.

DC-9 WALL SCONCEYour loved ones will always be with you when displayed in the passenger fuselage window. These frames are cut from commercial passenger aircraft from Boeing, Douglas and Lockheed aircraft. Each unit comes with a hanger wire and dual Plexiglas windows to sandwich your favorite photo. All units are stripped, sanded and polished to a mirror finish.

FUSELAGE PICTURE FRAMES

30

Fuselage Room Dividers

Roll a Boeing 737 Fuselage next to your desk for a little privacy. These 737 panels on casters are available in 5’ sections with low profile casters. They are light weight and perfectly balanced.

737 ON CASTERS

31

WWW.MOTOART.COM


Enjoy a sleek look for dividing rooms or as wall art. Shown here in a 9’ length with a historic Pan Am 707 that made the 25th anniversary flight from New York to Paris. The outside fuselage was stripped, sanded of all imperfections and mirror polished with the original windows still intact. This design can be customized in a variety of options including sizes, window illumination for transparent photographs, custom graphics and original paint schemes.

707 FUSELAGE

32

Join the Mile High Club without the hassle of going to the airport. The Mile High Bed will lift you to new altitudes of comfort and style. Designed and fabricated from two DC-9 rear stabilizers and a C-130 inner flap. The bed is 11’ long x 7’-6” wide x 4’-6” high. All surfaces are sanded and mirror polished. The bed is accented by 1/2” Plexiglas and illuminated with internal LED lighting. The smooth surfaces provide a wonderful playground for you and your co-pilot.

MILE HIGH BED

Room and Office

33


Designed with two aileron’s that are stripped and powder coated with your desired color, stood vertically and mounted on custom stained & clear coated hardwood shelves. 7’-8” total height, width can be customized to your specifications.

AILERON BOOK SHELF

High Flying Entertainment has never looked so good. Custom designed wing aileron entertainment centers are now available at MotoArt. Each is created by using the skeletal frames of the C-119 aileron with a powder coat and hard wood stained finish. Since they are made to order; sizes, colors and options can vary including internal illumination and custom laminates. Please e-mail us for more details and pricing.

FLIGHT ENTERTAINMENT

34

WWW.MOTOART.COM

Your favorite girl can now be your favorite pin-up. The B-25 Nose Art collection lets you be creator, or pick from our on-hand selection of our favorites. Unlike other Nose Art collections you may find in the market, these are created MotoArt style with authentic B-25 panels from WWII. Our artists are standing by.

B-25 NOSEART

Artwork

35

WWW.MOTOART.COM

What once torqued the engine of a 1940’s Jacobs Radial is now available in desk lamp. Designed with an authentic Jacobs piston and a UL listed LED adjustable gooseneck lamp, this lamp will shine for 100,000 hours without needing to be replaced. Also Available are the Architects Spring Arm Lamps with halogen lighting.

RADIAL ENGINE PISTON LAMPS

MotoArt Rule #1 - No clocks! But after finding 5,000 new 1940’s era Jacobs radial engine pistons, we had to figure out something to do with them. Thus, was born our very cool DeskWatch. These dead stock new pistons are machined at a 60-degree angle for easy reading.

PISTON DESK WATCH

Make your company logo stand out in your customer’s office guarantied! A gift that is so truly unique and stylish, that it can’t help but be displayed. With a minimum order, MotoArt can etch your company logo on the face of each piston Desk-Watch or Piston Lamp. Camera-ready art of your logo required. Call or e-mail us for details.

GREAT CORPORATE GIFT IDEAS

Lighting


Large Propeller Sculptures

Propeller BladeConvair: 7’-4”B-17: 6’-6”B-50: 9’P-47: 7’-4”Corsair: 7’-6”DC-6: 7’-4”C-130 7’-4”

B-25 7’2”DC-3 6’-6”P-3 Orion: 7’-3”Hellcat: 6’-8”P-51: 6’-4”Constellation: 8’-6”DC-4 7’-4”

These museum-worthy, historic propellers find their way to MotoArt from a variety of aircraft dating back to WWII. Each blade undergoes dozens and dozens of hours sanding and then polished to a mirror finish. These MotoArt sculptures are handsomely mounted on a propeller “clam shell” hub, with internal illumination. To compliment your environment, the hub may be powder-coated any color or chrome plated for an all-polished look. Pricing is based on the size and rarity of the blades.

LARGE PROP SCULPTURES

37


WWW.MOTOART.COMSmall Propeller Sculptures

Smaller but just as stunning as our Large Propeller Sculptures, the Small Prop Sculptures will fly almost anywhere. All blades are sanded and polished to a mirror finish and tastefully mounted on an internal rotating cam gear. These bases are powder coated clear to highlight etched inspection signatures and exceptional milling.

SMALL PROP SCULPTURES

38

Spyker Cars debuted their new display by MotoArt at the Los Angeles Auto Show. The MotoArt design accents the aviation heritage of Spyker Cars, which dates back to 1914 when they merged with a Dutch Aircraft Company. MotoArt is pleased to announce that Spyker World is rolling out our exhibit package to all new Spyker distributors. This custom exhibit package includes a 737 fuselage, C-124 cargo flooring, F-80 Information Lecterns. Also included but not shown a C-130 Coffee Table and Galley Cart for paint samples.

SPYKER CARS EXHIBIT

39

Custom OrdersFrom Concept to Reality

MotoArt is pleased to offer turnkey custom design concepts and fabrication. Our in-house capabilities include rough pencil sketch renderings to high tech three-dimensional drawings showing you every angle of the proposed piece. From trade show exhibits, interior design, and custom fabricated furniture, MotoArt can provide you or your clients exactly what you envisioned and more!


WWW.MOTOART.COM

MotoArt and Microsoft teamed up to deliver a unique and compelling design exhibit space to present the Flight Simulator X. Touted by aviation enthusiasts as THE “as real as it gets” flight simulation experience. Microsoft debuted their new Flight SimX exhibit at the EAA Air Show 2006 in Oshkosh, Wisconsin. The exhibit was created utilizing four TBM Avenger Elevators each mounted on a set of four 737 Galley Bars to create the user space to play the game.

FLIGHT SIMULATOR X

MotoArt and the Boeing team joined forces to create this unique flight simulator. Using a combination of vintage Boeing KC-97 cowlings and state of the art glass control panels this unit can be seen making the rounds at the worlds premier air shows. Function meets fun!

BOEING 787 FLIGHT SIMULATOR

40

The Motolife

41


WWW.MOTOART.COM

42

The Motolife

43


WWW.MOTOART.COM

727See products made from this plane on pages: 8, 11

The Aircraft

45

B-52 StratofortressSee products made from this plane on pages: 14, 29

B-25 BomberSee products made from this plane on pages: 5, 24, 35

747See products made from this plane on pages: 7

DC-3See products made from this plane on pages: 26

707See products made from this plane on pages: 20, 29, 32

C-119 “Flying Box Car”See products made from this plane on pages: 6, 12, 17 23, 34

C-130 HerculesSee products made from this plane on pages: 4, 10, 14, 33

L-1011See products made from this plane on pages: 18, 19, 26

F-4 PhantomSee products made from this plane on pages: 16

WWW.MOTOART.COM

DC-4See products made from this plane on page: 9

DC-9See products made from this plane on pages: 3, 13, 24 30, 33

Radial EnginesSee products made from this plane on pages: 21, 22, 36

Grumman AlbatrossSee products made

from this plane on page: 15

MK-84 BombsSee products made from this plane on page: 27

SikorskySee products made from this plane on pages: 35


MotoArt, LLC Torrance Airport 23940 Madison Street, Torrance, CA 90505Tele: (310) 375-4531

www.motoart.com

8001 Hillsborough RdSuites G & H

Ellicott City, Maryland 21043

Contact: Mike Rudden301-806-6029

[email protected]

East Coast Sales & Showroom Gallery:

West Coast Sales & Showroom:

23940 Madison Street,Torrance, California 90505

Contact: Piedra Stone310-375-4531

[email protected]

Asia Pacific Office

Hong KongAsia

Contact: [email protected]

European Sales & Showroom Gallery:

ArteinmotionReggio Emilia, Italy

Contact: Carlo PanciroliTél: +39-0522924056

[email protected]

MotoArt

Documents

Transcript of MotoArt