Easy to use and friendly Graphical User InterfaceNew Indoor Mapping capabilityDisplays Scanner Measurements

- GSM: RSSI Wide, RSSI Narrow, Spectrum Analysis, Control Channel Color Code (BSIC, C/I)

- WCDMA: RSSI Wide, RSSI Narrow, Spectrum Analysis, Pilot, Top N Pilot, Timeslot

- CDMA2000: RSSI Wide, RSSI Narrow, Spectrum Analysis, Pilot, Top N Pilot, Code Domain

Provides ability to perform RSSI channel scans and DBS measurementsHardware Auto Detection makes installation and set up easyProvides logging options and audio alarms settings

Simplifying Wireless Intelligence…CERTIFIEDISO 9001:2000

DTI, a PCTEL Company

DTI, a PCTEL Company

12810 Wisteria Drive, Germantown, MD 20874 USA301.515.0036 voice 301.515.0037 fax

www.DynamicTelecommunications.comSpecification Subject to Change Without Notice.

Specifications*

Frequency BandsSingle-Bands: 800MHz, 900MHz, 1800MHz, 1900MHz, and 2100MHzDual-Bands: 800/1900 MHz and 900/1800 MHz

ProtocolsGSM, CDMA2000 or WCDMA

Scanning SpeedUp to 500 Channels/second

Basic Accuracy± 1.0 dB typical

Frequency Accuracy± 0.05 ppm GPS Locked± 0.2 ppm GPS Unlocked

Operating RF Input Signal Range-120 dBm to -15 dBm

Input PowerReceiver: +8 to +16 VDC (Negative

Ground), 1.0A Max @ 12 VDCDRS: 10.5 - 16.5 VDC, 2.4 W

SizeReceiver: 6.5” x 5.25” x 1.375”DRS: 2.1” diameter, under 5” long

WeightReceiver: Less than 3 lbsDRS: 0.5 lb

Features of InSite LX Software

Ordering Information

For Ordering Information Please Contact DTI Sales at +1.301.515.0036

InSiteTM RF Data Collection System…

Rev B

April 2004

InSiteTM RF Data Collection System

Hardware (Receiver and DRS)

Software (InSite LX)

Operating SystemWindows 2000

Scanner supportSeeGull LX single or dual bands

DTI is a leading supplier of high-speed, multi-standard receivers as well as test and measurement solutions to the Wireless Industry Worldwide.

Founded in 1995, DTI maintains its world headquarters in the technology corridor located in Germantown, Maryland, on the USA’s East Coast. DTI was acquired in March of 2003 by PCTEL, a leading provider of innovative and cost-effective Internet access solutions and 802.11 mobility software.

DTI is recognized for World-class speed and quality that helps our customers thrive in a competitive environment.

Wireless Solutions

• Interference & Propagation Measurements

• Data Collection Systems• Scanning Receivers• Transmitters• Market Analysis• Base Station Monitoring• Custom & OEM Solutions

Wireless Applications

• Network Optimization• Co-channel Interference• Indoor Test & Measurement• Coverage Testing

Version 2.0

PRELIMINARY

Notes: * See scanner datasheets for more specifications

Minimum Distance Sampling 10 cm on one Channel @60 MPH

Wire

less

Driv

e Te

st S

olut

ions

…

Provides a Propagation Tool, Drive-Test Scanner and Spectrum Analyzer all in one Solution

Portable and easy to install

High performance fast scanning receivers

Reliable tool with accurate and precise measurements

Fully integrated test system provides ease of use

User friendly and intuitive graphical user interface

Dynamic Telecommunication (DTI)’s InSiteTM RF Data Collection System is a cost-effective and user friendly approach to collecting and displaying drive test data for deployment and optimization of wireless networks. The InSiteTM

System helps wireless operators to meet their network coverage, capacity, and quality goals.

DTI’s InSiteTM RF Data Collection System is used throughout the network lifecycle, from initial deployment to ongoing testing and optimization, in areas such as:

• Drive Test and Measurements• Site Surveys• Model Tuning• Base Station Monitoring• Demodulating RF Signals• Analyzing Wireless Network Data

DTI’s InSiteTM RF Data Collection System includes:

• InSite LX software• 1 to 8 SeeGullTM LX receivers

(GSM, WCDMA, or CDMA2000)• Doppler Radar Sensor (DRS)• Laptop (option)• Cables and Accessories

Benefits…

InSiteTM RF Data Collection System

Network Deployment

DTI, a PCTEL Company

Network Optimization

Challenge:

Determining whether or not a site meets its coverage, capacity, and quality objectives successfully.

Challenge:

Minimizing cost of deploying cellular networks and working with the inherent limitations of predicated data.

Solution:

Performing drive tests and collecting measured data about the network in question. The drive test data is very valuable for site evaluation and model calibration.

Measures GSM, CDMA2000 and WCDMA signals

Dual-Band Collection Capability

Supports Lee Criteria and Distance Based CW Measurements

Built-in Spectrum Analysis

RSSI, Pilot (PN), Top N, and TimeSlot Measurements

Internal GPS

Indoor mapping

Hardware auto-detection

Features…

Solution:

Performing drive testing to collect data that is used in comparison with predicted data to assess coverage consistency and verify that site performance goals are met.

Applications…Overview…

Doppler Radar Sensor

SeeGullTM LX High-Speed Scanning Receiver

• As a Drive Testing tool, the InSiteTM System measures and displays highly accurate and reliable RF data that are used to identify network problems and why they occurred

• As a Propagation Testing solution, the InSiteTM System provides propagation data for analysis of network coverage

• As a Model Tuning tool, the InSiteTM System collects data under Lee’s sampling criteria which improves the reliability of estimating signal levels

• The InSiteTM System also serves as a Spectrum Analysis tool that measures and reports power spectral density

• Network Deployment involves the processes of site evaluation and acceptance testing (Figure to the right)

• Performing drive testing with an InSiteTM RF Data Collection System helps to shorten a network’s turn-up time, optimize its performance, and improve its quality

• Accurate RF Data is used for an effective site survey that saves both time and money

• Distance Based feature (with DRS) fine-tunes prediction data

Drive testing with the InSiteTM System addresses the entire network evolution cycle

InSiteTM RF Data Collection System