Medica 2013 Exhibitor Catalogue

P.b.b. GZ 02Z033434 M | Verlagspostamt: A-8010 Graz, Wickenburggasse 32 | www.schaffler-verlag.com | ISSN 0472-5530

ÖKZ EXTRA:MEDICA

2013

World Forum for Medicine

Medical devicesGesundheitswirtschaft

MEDICA Facts

ClusterVerzeichnis

InternationalInnovation

Austria

Visitors

Hall Plan

B2BExport

ÖsterreichCompany Profiles

Exhibitors

MEDICAAussteller

Hallenplan

Inhalt 3 Grußworte/Preambles

4 MEDICA2013–Wasmanwissenmuss

6 Firmenverzeichnis/CompanyProfiles

13 Hallenplan/PocketPlan

WasUnternehmenleisten

5 CAS:ReineLuftistunserBusiness

7 BieglerMedizinelektronik: AutomatischerDruckinfusor

9 MAQUET

11 HeintelMedizintechnik: Inkontinenzpflege

17 Gesundheits-ClusterOÖ– TheHealthTechnologyCluster

19 LISA–LifeScienceAustria: AdvancingAustrianlifescience attheheartofEurope

21 ClusterLifeSciencesTirol– MedizintechnikmadeinTirol

23 human.technology.styria.– Networkingwithasmile

25 S.I.ESystemIndustrieElectronic: DasunvergleichlicheBedienerlebnis durchrevolutionäreHMI-Lösungen

27 ADVANTAGEAUSTRIA– CommitedExperts

28 MEDICA2013

Impressumnach§24MedienG:Medieninhaber: Schaffler Verlag GmbH, DVR 1031911, A-8010 Graz, Wickenburggasse 32, T: +43(0) 316 820565-0, F: +43(0) 316 820565-20, E: [email protected], Web: www.schaffler-verlag.com. Druck: Dorrong, Graz. Herausge-ber: Mag. Roland Schaffler, [email protected], am Standort RedaktionGraz: Wickenburggasse 32, A-8010 Graz. Weitere Informationen und Offenlegung nach § 25 MedienG: www.schaffler-verlag.com > „Impressum“

MEDICA – Branchentreff der Gesundheitswirtschaft

Als größte Messe der Gesundheitswirtschaft öffnen MEDICA & COMPAMED von 20. bis 23. November 2013 wieder ihre Hallen und die internationale Fachszene kommt zum Weltforum der Medizin nach Düsseldorf. Die Vielzahl der österreichischen Besucher und Aussteller macht die MEDICA zugleich zur größten österreichischen Medizinmesse mit internationaler Wirkung.

Mit der ÖKZ EXTRA: MEDICA sind Sie bereits bei Ihrer Messevorbereitung und auch vor Ort bestens gerüstet: Die ÖKZ EXTRA: MEDICA präsentiert österreichische Aussteller und Besucher in Düsseldorf mit übersichtlichen Firmenprofilen und Kontaktdaten. Ein handlicher Pocket-Plan mit Firmen- und Hallenübersicht in der Mitte des Heftes gibt Übersicht und macht Ihren Weg durch die Hallen von MEDICA und COMPAMED noch einfacher.

Informieren Sie sich über Aussteller und Besucher und vereinbaren Sie Ihre Messetermine rechtzeitig mithilfe der Kontaktdaten aus den Firmenprofilen. Falls Sie das Heft nicht nach Düsseldorf mitnehmen wollen – Auf den Gemeinschaftsständen von Life Science Austria, organisiert von Human.technology Styria in Halle 17, sowie auf den Ständen der Wirtschaftskammer in den Hallen 3, 8b und 17 liegt die ÖKZ EXTRA: MEDICA ebenfalls auf.

Das alles macht die ÖKZ EXTRA: MEDICA, die in Kooperation mit der Dachmarke Life Science Austria (LISA), Advantage Austria/Wirtschaftskammer Österreich und den Clustern Gesundheits-Cluster, Human.technology Styria sowie dem Cluster Life Sciences der Standort-agentur Tirol entstand, zum unverzichtbaren Messeplaner für die MEDICA 2013.

Gute Vorbereitung für die MEDICA und wir sehen uns in Düsseldorf!

Ihre Eva Gillesberger

Life Science Austria: Advancing life science at the heart of Europe

Welcome to the LISA Pavilion 17D20 at MEDICA 2013!

Over the past decade, Austria has established itself as a well-respected hub of the life science industry. Region by region, the life science industry has spread across Austria from the capital Vienna to the powerhouses of Styria, Tyrol and Upper and Lower Austria. Each region has its own special culture and particular strengths that are reflected in the local companies who are organised through regional life science clusters. In Austria a total 435 companies can be related to the field of medical technology. These companies employ in total almost 25,000 people and have a turnover of 7.4 billion euros.

Life Science Austria (LISA) promotes the life science sector in Austria on the international stage and is the first point of call for enquiries relating to it. Organised through regional life science clusters, LISA represents companies in the therapeutic, medical technology and diagnostic sectors as well as providers of enabling technologies.

This booklet is intended to help you find your right contacts with any of our attending Austrian life science companies. Please do not hesitate to come by our LISA desk if you need additional information. We will be more than happy to assist you.

Sonja PolanManager International Marketing

Discover and experience the fascinating innovations and trends “made in Austria”!

There are 61 Austrian exhibitors presenting at MEDICA & COMPAMED 2013, including 21 companies at the Austrian Group stands in halls 3 and 17 and at COMPAMED (hall 8b).

This exhibition guide aims to give you an insight into the diverse range Austria has to offer in the fields of medical technology, microbiology, laboratory medicine, diagnostics, producing and processing medical products as well as equipment and technology for manufacturing medical devices. It should also simplify your visit around the fair.

With our offices in Frankfurt, Berlin and Munich – www.advantageaustria.org/de – the Austrian trade delegations are your first port of call for establishing contacts to Austrian companies. We look forward to meeting you at our group stand and wish you a successful MEDICA & COMPAMED 2013.

Michael LoveAustrian Trade Commissioner

MEDICA 2013 – World Forum for Medicine

The global health market is growing annually by about six per cent. MEDICA in Düsseldorf is the largest and leading medical trade fair worldwide and has been able to continually build on its position as an influential platform for transnational business, information and expert exchange. Indicators for this outstanding role of MEDICA are amongst others an ageing society, a strong population growth, technical advancement and above all, the increased purchasing power all over the world. The high level of internationality among exhibitors and visitors is testament to this. Almost three quarters of the more than 4,500 exhibitors at MEDICA 2012 were international participations. At the same time more than one in two of the total of 130,600 trade visitors came from outside Germany to the city on the Rhine.

Even though MEDICA looks back on a history of more than 40 years of successful events and takes place every year, MEDICA one year is never the same as MEDICA the following year. Product ranges in the trade fair and the accompanying congresses are continually revised and adapted to visitors‘ changed requirements. It is only in this way that the right target groups can be directed to the exhibitors. Once again, for MEDICA 2013, which will take place from November 20 to 23 in Düsseldorf, numerous ideas will be put „into action“. Read more about this year’s MEDICA on the following pages!

As far as the advancing miniaturisation in medical technology is concerned, this is illustrated wonderfully by the cooperation of MEDICA with COMPAMED, the international leading market platform of suppliers for the medical technology industry (November 20-22 2013/halls 8a and 8b).

Visit us online at: www.medica.de and www.compamed.de

Joachim SchäferManaging Director Messe Düsseldorf

54. Jg. (2013), ÖKZ EXTRA: MEDICA | www.schaffler-verlag.com ÖKZ EXTRA: MEDICA 3

Vor diesem Hintergrund entwickeln sich die Gesundheits-märkte in den meisten Ländern schneller als das Bruttoin-landsprodukt. Halten diese Trends unverändert an, steigt

der weltweite Gesundheitsmarkt von aktuell gut 5 Billionen auf rund 15 Billionen Euro im Jahr 2030.

Wie sich die Struktur der Nachfrage verändert, so vielschichtig präsentiert sich der globale Markt auch in Bezug auf das Ange-bot. Einst eher als Low-Price-Anbieter betrachtet stellen sich etwa Großkonzerne aus China weltweit dem Wettbewerb mit den marktbestimmenden „Big Playern“ und haben die Qualität ihrer Produkte sowie ihr Service-Angebot deutlich gesteigert. Und auch Unternehmen aus aufstrebenden Schwellenländern wie

Indien, Malaysia oder Thailand haben in stark preisorientierten Marktsegmenten bereits auch Kliniken in Europa oder Amerika als Abnehmer.

Daraus erklärt es sich auch, warum die MEDICA als weltweit größte und führende Medizinmesse ihre Position als maßgeben-de Plattform für länderübergreifendes Business, Information und den Expertenaustausch kontinuierlich ausbauen konnte. Der hohe Internationalitätsgrad auf der Aussteller- sowie Besucherseite ist ein Beleg dafür. Fast drei Viertel der mehr als 4.500 Aussteller der MEDICA 2012 waren internationale Beteiligungen. Zugleich kam mehr als jeder zweite der insgesamt 130.600 Fachbesucher nicht aus Deutschland.

MEDICA 2013 – Was man wissen muss

Der globale Gesundheitsmarkt wächst jährlich um rund sechs Prozent. Eine alternde Gesellschaft, starkes Bevölkerungswachs-tum, der technische Fortschritt und die Zunahme der Kaufkraft in weiten Teilen der Welt sind die treibenden Kräfte.

Foto

: Mes

se D

uess

eldo

rf /

ctill

man

n

54. Jg. (2013), ÖKZ EXTRA: MEDICA | www.schaffler-verlag.com4 ÖKZ EXTRA: MEDICA

MEDICAFacts

Dabei hilft den Ausstellern, dass die in den letzten Jahren forcierte zielgruppenspezifische Marketing-Kampagne der MEDICA Früchte trägt: Immer mehr Besucher sind Top-Entscheider (93 % Entschei-derquote).

ImmeramPulsderZeit

Wenngleich die MEDICA auf eine mehr als 40 Jahre währende erfolgreiche Veranstaltungshistorie zurückblickt und jedes Jahr stattfindet, so gleicht kein Jahr dem anderen. Angebote in der Fachmesse und den begleitenden Kongressen werden fortlaufend überarbeitet und den veränderten Erfordernissen der Besucher an-gepasst. So gelingt es, den Ausstellern die richtigen Zielgruppen zuzuführen. Auch für die MEDICA 2013 werden wieder zahlreiche Ideen „in die Tat“ umgesetzt.

RelaunchfürdasKongressprogramm

So erfährt das Kongressprogramm der MEDICA eine Neuposi-tionierung. Die programmatische Weiterentwicklung des Kon-gresses sieht ein schärferes Themenprofil vor, eine noch engere Verzahnung mit den Themen der MEDICA-Fachmesse und den Ausbau des internationalen Programmparts. Deshalb erfolgt auch die Umbenennung in „MEDICA Conferences & Forums“.

Unter dem Titel MEDICA EDUCATION CONFERENCE bilden teilneh-merstarke Kurse der Vorjahre die Basis z. B. zu allgemeinmedizini-schen Themen inklusive der Praxiskurse am Gerät, die unverändert mit CME-Punkten für die ärztliche Fortbildung zertifiziert sind.

Englischsprachige Programmbestandteile sind unterdessen be-reits in diesem Jahr eine Vortragsreihe zu aktuellen Aspekten in Bezug auf individualisierte Medizin, eine internationale Konfe-renz zu Katastrophen- und Wehrmedizin sowie eine hochkarätige Veranstaltung für die internationale Sportmedizin-Fachszene.

DeutscherKrankenhaustag&EuropeanHospitalConference

Fester Bestandteil der MEDICA 2013 ist zudem der 36. Deutsche Krankenhaustag als die führende Informations- und Kommunikati-onsplattform für alle Entscheider der Kliniken in Deutschland. Pa-rallel dazu werden etwa 150 bis 170 Top-Entscheider aus Europas Krankenhäusern am 20. November 2013 zur zweiten EUROPEAN HOSPITAL CONFERENCE (EHC) in Düsseldorf erwartet. Die EHC fin-det im Zwei-Jahres-Rhythmus statt.

ForenundFachmesse

Als weitere Programmkomponenten von MEDICA Conferences & Forums greifen auch die in die Fachmesse integrierten Foren maß-gebliche Trends auf. Dazu zählen u. a. MEDICA HEALTH IT FORUM (IT-Trends, Telemedizin/Halle 15) und MEDICA TECH FORUM (Ent-wicklungen auf dem Gebiet der Hightech-Medizin) mit jeweils auch englischsprachigen Vorträgen, MEDICA PHYSIO FORUM (Physio-therapieverfahren/Halle 4) sowie etwa das 2012 erfolgreich von der Messe Düsseldorf und der Techniker Krankenkasse (TK) initi-ierte MEDICA ECON FORUM zu Fragen der Nutzenbewertung und Finanzierung von Innovationen.

MEDICAundCOMPAMED–DieMedizintechnik-IndustrieundihreZulieferer

Die fortschreitende Miniaturisierung in der Medizintechnik be-trachtend wird wunderbar das Zusammenspiel der MEDICA mit der parallelen COMPAMED, der international führenden Marktplatt-form der Zulieferer für die Medizintechnik-Industrie (20. bis 22. November 2013, Hallen 8a und 8b) deutlich.

Beispielhaft zu nennen sind Entwicklungen auf dem Gebiet der Im-plantatemedizin, wo der korrekte Sitz von Implantaten (z. B. Hüft-gelenken) durch integrierte Beschleunigungssensoren kontrolliert wird. Oder nicht minder spannend sind aktuelle Arbeiten auf dem Gebiet der Neuroprothetik. Diese Beispiele zeigen: Wer up-to-date bleiben will, was die Medizintechnik-Szene aktuell bewegt und wie die Medizintechnik-Industrie im Zusammenspiel mit ihren Zuliefe-rern den medizinischen Fortschritt im Sinne qualitativ guter und wirtschaftlicher Patientenversorgung vorantreibt, für den ist ein Besuch der MEDICA und der COMPAMED 2013 ein Muss.

Weitere Informationen: www.medica.de www.compamed.de

Joachim Schäfer, Geschäftsführer der Messe Düsseldorf GmbH

R

Reine Luft ist unser Business.

CAS Clean-Air-Service AGCH-9630 WattwilT +41 (0)71 987 01 01

CAS Clean-Air-Service AGD-52134 HerzogenrathT +49 (0)2407 5656 - 0

CAS Clean-Air-Service AGA-1120 WienT +43 (0)171 728 285

www.cas.ch

Messtechnik und -service– Reinraumqualifizierung– Filtersystem-Integritätstest– Instandhaltung und Sanierung– Strömungsvisualisierung

Prozessvalidierung– Qualifizierung von thermischen

Prozessen

Dienstleistungen– Qualitätssicherungsmassnahmen– Validierungsvorschriften– Arbeitsvorschriften– Kundenseminare und Workshops

Kalibrierservice– Vertrieb von CLiMET-Partikelzähler

und deren Kalibrierung– Kalibrierung von physikalischen

Messgeräten


MEDICAFacts

8b/F03-2abatec electronic solutions GmbH Oberregauer Straße 48A-4844 RegauT: +43(0)7672/[email protected]

3/F56, 3/G64, 8b/F03-5, 17/C20-5ADVANTAGE AUSTRIA Unterlindau 21-29,D-60323 Frankfurt/MainT: +49(0)69/971 012 [email protected]/deContact: Mag. Michael Love

8b/F03-4AMACO ING. VONACH GmbH Dornbirner Str. 19 A-6890 LustenauT: +43(0)5577/[email protected]

17/C20-2alpha trace medical systems Dr. Grossegger & Drbal GesmbHRuthgasse 19/1A-1190 WienT: +43(0)1/[email protected]

abatec electronic solutions specializes in electronic solutions from circuit boards to complete devices, with 5,000 m² production space at its two sites. We are able to fulfill orders of almost every volume just in time and in variable batch sizes, from standard products to customized solutions, on several automated SMT and THT lines with an integrated test bay and several assembly lines. Whether you need contract manufacture (EMS) or solutions designed and developed by abatec (E²MS), you benefit from Austrian quality certified to the following standards: Industrial ISO 9001, Automotive TS 16949, Medical EN ISO 13485

ADVANTAGE AUSTRIA supports Austrian companies with a view to finding new contacts and strengthening existing business companies. We are the first point of contact for companies looking for suitable Austrian suppliers, technologies and business partners in all industry sectors and in the medical sector in particular. Bringing business together is our business. The Austrian Pavilions are organized as a joint venture between Austria’s official trade promotion organization „ADVANTAGE AUSTRIA“ and the ADVANTAGE AUSTRIA office in Frankfurt.

AMACO is a system supplier for printing and coding on packages and products all over the world. Business activities are stretched nowadays to more than 78 countries worldwide. AMACO‘s flexographic and thermal transfer printers print all required fix and variable product information in-line onto blister packs of medical disposables. The printers are installed on intermittent running packaging machines. BENEFITS: highest quality printing, top flexibility, easy handling, cost savings on packaging process, no pre-printed packaging material – less stock.

As a pioneer in the digital EEG field, alpha trace has provided numerous hospitals and private practices with cutting-edge equipment in the field of neurology, neurophysiology and sleep medicine. With more than 25 successful years in the field we supply computer-based diagnostic systems that have been validated and improved over decades. Following a customer-centric innovation philosophy, our customers’ needs are the focus and driving force behind everything we do. The networked alpha trace solutions feature an innovative user interface, a common database and premium support. The current alpha trace product range includes: EEG systems, including VideoEEG, EMG systems, including evoked potentials and neurography, and sleep systems.

VisitorAnagnostics Bioanalysis GmbHWestbahnstraße 55, A-4300 St. ValentinT: +43(0)7435/581 [email protected]: Karl [email protected]: +43(0)664/516 14 99

Anagnostics‘ vision is to establish our proprietary hybcell technology, a breakthrough development in multiplex diagnostics, as an internationally widely accepted standard.Located in St. Valentin, Austria, we started our developments in 2006. Our team comprises of specialists in molecular diagnostics, mechatronics and software engineering. Our focus for development is user-friendliness of our products. hybcell is the result of our goal to bring multiplexed diagnostics into routine analysis. hybcell is the world’s first cylindrical microarray, changing paradigms in microarray technology and re-defining biochips.


CompanyProfiles

Biegler GmbHAllhangstrasse 18a

Tel.: +43 1 979 21 05Fax:

3001 Mauerbach, Austria

+43 1 979 21 05 16email: [email protected] www.biegler.com

AUTOMATISCHERDRUCKINFUSOR

Verabreichung von

Flüssigkeiten unter

konstantem Druck mit

elektronischer Regelung

3/D52AMEDA Labordiagnostik GmbH Krenngasse 12A-8010 GrazT: +43(0)316/698 069www.amp-med.comContact: DI Gerald [email protected]

8b/F03-6AT & S Austria Technology & Systemtechnik AG Fabrikgasse 138700 Leoben-HinterbergT: +43(0)3842/[email protected]

AMEDA Labordiagnostik GmbH is an Austrian manufacturer specialized in supply of modern and reliable technology for use in routine in-vitro diagnostics. The product portfolio known worldwide under the AMP Diagnostics brand includes diagnostic kits in various convenient configurations as well as equipment covering the segments of clinical chemistry, immunology, hematology and coagulation, as well as urine and rapid diagnostics.The commitment to highest quality standards as well as flexibility in meeting customer requirements are a solid and reliable basis for long-term collaboration with distribution partners in more than 60 countries all over the world.

Austria Technologie & Systemtechnik Aktiengesellschaft (AT&S) is European market leader and one of the world’s leading producers of high-end printed circuit boards. AT&S is especially well positioned worldwide in the highest tech market segment for HDI microvia printed circuit boards, which are chiefly used in mobile devices. The Group is also highly successful in the automotive printed circuit board market, and in the industrial and medical technology sectors. As an international growth enterprise AT&S has a global presence, with three production facilities in Austria (Leoben, Fehring, Klagenfurt) and one in India (Nanjangud), China (Shanghai) and Korea (Ansan, near Seoul) and currently employs 7,500 people.

CompanyProfiles

17/D20ATOS Medical Solution Unterkriech 34A-4845 Rutzenmoos/[email protected]: Michael SchiemerM: +43(0)664/333 97 23

11/A22BIEGLER GmbH Allhangstraße 18 aA-3001 MauerbachT: +43(0)1/979 21 [email protected]: Ingeborg [email protected]

17/D20Bossard Austria GmbH Geiselbergstraße 10-12A-1110 WienT: +43(0)1/797 70 12www.bossard.atContact: Kai von [email protected]: +43(0)664/887 180 31

3/F72-3Biomedica Medizinprodukte GmbH & Co KGDivischgasse 4A-1210 WienT: +43(0)1/291 07 [email protected] www.bmgrp.comContact: Dr. Bernhard Küenburg

ATOS MEDICAL SOLUTION is a young company from Austria. Medical Solution is part of the ATOS Group GmbH which is situated in Upper Austria. Some of our products are the carry chair “ATOS STAR” for ambulance vehicles, or a transport solution for the Medumat Transport Ventilation device. We develop together with you and our highly qualified employees an individual solution for your application. We also offer technical inspections of medical products. Please check out our homepage for further information or send us an email with your request.

Biegler has been successfully involved in development and production of medical devices and disposables for more than 35 years. In a row of prime instruments are the blood and infusion warmer BW 685/S, Protherm II and the emergency warmer ESH04 for mobile use. The automatic pressure infusor AUTOPRESS can be used directly with the warmer or as stand-alone solution wherever fluids have to be dispensed under constant pressure. Biegler offers integrated development and production as OEM services. Certifications: ISO 13485:2003, CE 0123, FDA-registered for several products.

Bossard is a leading supplier of intelligent solutions for industrial fastening technology. The company’s complete portfolio for fasteners includes worldwide sales, technical consulting (engineering) and inventory management (logistics). Its customers include local and multinational industrial companies who use Bossard‘s solutions to improve their productivity. Employing more than 1,800 people in over 60 locations around the world, the Group generated CHF 487.1 million in sales in 2012. Bossard is listed on the SIX Swiss Exchange.

Biomedica is a leading distribution partner for high value medical products and in vitro diagnostics in the human and veterinary field with subsidiaries in all 13 central- and southeast European countries and a highly motivated and educated team of 250 people.Additionally, Biomedica provides innovation in the following areas:1) Biomedica Immunoassays: highly sensitive Elisa test kits for clinical research in the field of bone- and skeletal disease as well as in cardiology.2) DCX Biodecontamination for surface and room disinfection in hospitals via a dry hydrogenperoxide aersols.3) PhC Autoinjectors for intramuscular emergency injection for military and civil use.

11/F21Carl Reiner GmbHMariannengasse 17A-1090 WienT: +43(0)1/402 62 [email protected]: Peter [email protected]

Today the brand name CARL REINER is a synonym for innovative development and the production of new technologies in medicine. This traditional enterprise in Austria is known to be a competent partner, especially in the fields of anesthesia, pulmology, cardiology, urology and ENT. Our product TwinStream™ Multi Mode Respirator provides tubeless Jet-Laryngoscopy, Jet-Bronchoscopy, Jet-Tracheoscopy and all forms of surgical and intensive care related Jet-Ventilation.


CompanyProfiles

12/D32CMB Maschinenbau & Handels GmbHConceptstraße 1, A-8101 GratkornT: +43(0)3124/[email protected]: Ing. Helmut [email protected]: +43(0)664/808 002 26

17/D20CNSystems Medizintechnik AG Reininghausstraße 13A-8020 GrazT: +43(0)316/723 [email protected]: Mag. Alice [email protected]

Since 1995 CMB develops and produces turn-key solutions for the treatment of medical waste, which are used in hospitals and labs. CMB provides technologies for the collection and internal transportation as well as microbiological inactivation and mutilation of infectious medical waste. Our patented disinfection/sterilization system “Sintion” treats all kind of medical infectious waste using the combined technology of microwaves and saturated steam. All pathological germs are killed and the waste is save for external transport to either incineration, landfilling or recycling.

CNSystems is market leader in the field of non-invasive, continuous hemodynamic optimization. We provide state-of-the art technology for Syncope assessment and pacemaker optimization in Cardiology and Internal Medicine as well as in the Research area. Our continuous, non-invasive blood pressure monitoring solutions including goal-directed fluid management also significantly support current clinical routines in Anesthesia and Perioperative Care.

MAQUET Medizintechnik

Vertrieb & Service GmbH

IZ NÖ-Süd, Strasse 16, Objekt 69 E 5

2355 Wiener Neudorf, Austria

Tel.: +43 2236 677 393 0

Fax: +43 2236 677 393 77

[email protected]

www.maquet.com

OP-INTEGRATION NEU DEFINIERTTEGRIS

MAQUET setzt neue Maßstäbe:Individuell anpassbare

Benutzeroberfläche

n

Workflow-orientierte Arbeitsabläufen

Chirurgische Sicherheits-

Checklisten

n

Höchste Flexibilität bei geringstem

Platzbedarf

n

Time-shift Recordingn

Parallele Aufzeichnung von zwei

HD Quellen

n

MAQUET — The Gold Standard.

CompanyProfiles

3/D06DIALAB GmbH IZ NÖ Süd, Hondastraße Objekt M55A-2351 Wiener NeudorfT: +43(0)2236/660 [email protected]: Estelik Murat

3/F64-1eBioscience, an Affymetrix CompanyCampus Vienna Biocenter 2A-1030 WienT: +43(0)1/796 40 [email protected]: Michael [email protected]

17/C20-6EMS HandelsgmbH Schubertstraße 3A-2100 KorneuburgT: +43(0)2262/616 [email protected]: Alfred [email protected]

8b/E08EGSTON System Electronics Eggenburg GmbHGrafenberger Straße 37A-3730 EggenburgT: +43(0)2984/[email protected]: Ing. Herbert [email protected]

DIALAB GmbH was founded in 1972 and is a manufacturer and distributor of diagnostics and laboratory equipment – it offers the widest range of laboratory diagnostics worldwide. We dedicate ourselves exclusively to supporting the clinical laboratory and to supplying a complete range of products, based on 4 product lines, namely Clinical Chemistry Reagents, Immunological Reagents, Coagulation Reagents and Rapid Tests. Presently, DIALAB supplies its wide product range to more than 100 countries around the world.

eBioscience, an Affymetrix company is a lead supplier in immunoassays and proteins for Life Science research and diagnostic. Frequently first to market the company develops more than 800 innovative products every year including antibodies, fluorochromes and further reagents for immunology, oncology, cell biology, stem cell biology and diagnostics. In addition a broad spectrum of reagents for the analysis of cytokines, growth factors and other soluble proteins as well as ELISA kits, matched antibody pairs, proteins and standards. The latest novelty are ProcartaPlexTM bead-based multiplex immunoassays using Luminex® xMAP technology that enables the simultaneous detection and quantification of up to 50 protein targets in single 25-50ul sample.

YOUR PARTNER IN ELECTROPHYSIOLOGY: We offer high technology, high quality products for electromyography and evoked potentials (EMG/EP), intraoperative monitoring (IOM), electroencephalography (EEG), cerebral function monitoring applications (CFM), brain motor control assessment (BMCA), event related potentials (ERP) as well as complete range of electrodes and accessories. In the field of lung function monitoring we are proud to present our Angelie EIS Electrical impedance segmentography device. Choose EMS products and use our professional experience in design, development, manufacturing, servicing and supporting of high technology medical devices.

EGSTON, renowned for its compact and shapely designed N-Series and the rapidly available P-Series, has expanded its product range by introducing 42W and 60W models. A further step to improve its product range. To satisfy the customer needs even better EGSTON has reinforced its development group and focuses now even more on bespoke power supplies and charger designs up to an output of 150W. Customers can benefit from the 17 years of experience in miniature high efficiency power supply design and the detailed knowledge in the optimum usage of modern microcontrollers from different brands. EGSTON power supplies and chargers are made in the EU.

10/B49EMTensor GmbH Donau-City-Straße 1, A-1220 WienT: +43(0)1/[email protected]: Mag. Ilse [email protected]

Founded in 2012, EMTensor specializes in mobile, radiation free, electromagnetic imaging devices, unifying anatomical and functional capabilities in a single technology, based on company’s long-standing and extensive research activities. This mobile technology can be deployed in ambulances and rescue helicopters, and is available for a wide range of medical applications, including stroke diagnosis, brain injuries, various types of cancer and cardiovascular screening.


CompanyProfiles

3/B53Eurolyser Diagnostica GmbH Bayernstraße 11aA-5020 SalzburgT: +43(0)662/432 100www.eurolyser.comContact: Mag. Gerhard [email protected]

8b/L20Feller GmbH Wärndorferstraße 3, A-2525 GünselsdorfT: +43(0)2256/[email protected]: Ing. Martin [email protected]

Eurolyser Diagostica is a point-of-care diagnostics specialist delivering high quality products to over 65 countries. We offer both analysis devices as well as test kits. Our latest innovation, the CUBE, is truly ground breaking: this compact, elegant, fast and precise instrument allows determination of the most important medical parameters such as CRP, Ferritin or PT (INR) in less than 10 minutes. The CUBE is intuitively operated with a tailored Android App on a Tablet PC. If desired, it can even be connected to electronic health services or databases.

Feller is a leading manufacturer of power cords and cables for the Medical, Healthcare and the Electronics industry. Feller has own production sites in the hotspots of the Electronics industry with the worldwide headquarter in the central European heart in Austria near Vienna. In Austria R&D, cable extrusion and fully automatized production is the main competence. Further locations are in: Hungary, in Newcastle UK, in North Carolina and California in the USA, Feller in Hong Kong/ China.


CompanyProfiles

17/D20FerRobotics Compliant Robot Technology GmbH Altenbergerstraße 69, A-4040 LinzT: +43(0)720/108 107 [email protected]: DI Dr. Ronald [email protected]: +43(0)660/5636982

13/A31H+H SYSTEM GmbH Weissenbach 325, A-5350 StroblT: +43(0)6137/217 [email protected]: Tobias [email protected]

17/D20Human.technology Styria GmbH Reininghausstraße 13, A-8020 GrazT: +43(0)316/587 [email protected]://human.technology.styriaContact: DI (FH) Gernot [email protected]: +43(0)699/188 997 06

17/D20Health Technology Cluster Hafenstraße 47-51, A-4020 LinzT: +43(0)732/79810-5156gesundheits-cluster@clusterland.atwww.gesundheits-cluster.atContact: DI (FH) Philipp [email protected]: +43(0)664/818 65 59

Ferrobotics is the technology leader in physically compliant robotics. We make robots feel. Our compliant CPM shoulder rehab device comes with haptic feeling competence and integrates eventual pain reactions intuitively. Easy teach-in of free motion patterns in all seen degrees of freedom. Each session is fully recorded and identically reproducible. Try the near-to-nature performance of our Active Motion Board for mobility maintenance, fall prevention up to professional fitness training! Free definable parameters. Boosts cognitive, motor and sensor competencies.

The H+H divider system has proved its worth in practice for more than 30 years in all medical areas from the pharmacy to the hospital. Safety and quality obtain top priority in the health care market, shop fitters and all types of businesses prefer organization and presentation. H+H SYSTEM is distributed by our partners in many European countries as well as in the H+H subsidiary in the USA. H+H SYSTEM, the partner when it comes to medication storage.

Human.technology Styria is a membership organization for the life science and related industries in Styria, Austria, a powerhouse of innovation with world leading reputations in the fields: biobanking and biomarker technologies, process engineering for pharmaceutical and biotechnology companies and advanced biomedical sensor technologies. The Cluster has assembled a highly integrated network of life science companies across Styria including companies at the very start of their existence right up to industry flagships.

We are an inter-sectoral network for increasing innovative capacity and international competitiveness of Health Technology companies, their suppliers as well as relevant research and healthcare facilities. We currently connect 220 partner companies from Austria and South Germany. Due to the Upper Austrian strength in medical technology, the main focus is on medical electronics, software, clean room & hygiene, hospital equipment, end-user products, diagnostics pharma and materials (metal/plastics).

02

01

03

Hotbed of Human Life Science Technology

human.technology.styria

3/F64-2Iason Labormedizin GmbH Feldkirchner Straße 4A-8054 GrazT: +43(0)316/284 [email protected]

IASON is specialist in laboratory reagents (ELISA, RIA) and the automatization of ELISA tests devices. Secondly IASON is one of the most experienced companies having established Europe’s most up to date pharmaceutical production centers based on cyclotron nuclide production and market registered in EU-products of 18F-PET-Tracers.


CompanyProfiles

P.b.b. GZ 02Z033434 M | Verlagspostamt: A-8010 Graz, Wickenburggasse 32 | www.schaffler-verlag.com | ISSN 0472-5530

PoCKETPlAn

2013

World Forum for Medicine

Medical devicesGesundheitswirtschaft

MEDICA Facts

ClusterVerzeichnis

InternationalInnovation

Austria

Visitors

Hall Plan

B2BExport

ÖsterreichCompany Profiles

Exhibitors

MEDICAAussteller

Hallenplan

Hallen/Halls 1, 2, 3 Labortechnik, DiagnosticaLaboratory equipment, diagnostics

Hallen/Halls 4, 5Physiotherapie/OrthopädietechnikPhysiotherapy/orthopaedic equipment

Halle/Hall 15Informations- und KommunikationstechnikInformation and communication technology

Hallen/Halls 5, 6, 7.0, 7.1, 7aBedarfs- und Verbrauchsartikel, Textilien Disposables, commodities and consumer goods, textiles

Hallen/Halls 8a, 8bCOMPAMEDHigh tech solutions for medical technology

Hallen/Halls 16, 17Nationale und internationale Gemeinschaftsstände,Elektromedizin, MedizintechnikNational and international joint participants,electromedicine, medical technology

Hallen/Halls 9 -14Elektromedizin, Medizintechnik, OP-Technik und EinrichtungElectromedicine, medical technology, operating technology and equipment

Krankenhauseinrichtung, Kommunikations-SystemeHospital equipment, communication systems

3 MEDICA VISION FORUM1/C40 Norma-XRöntgendiagnostika3/B53 EurolyserDiagnostica3/D06 DIALAB3/D52 AMEDALabordiagnostik3/F56 ADVANTAGEAUSTRIA3/F56-1 Technoclone3/F56-2 MEDTRUST3/F56-3 ViennaLabDiagnostics3/F56-4 MobilitasHealthGroup3/F64-1 eBioscience3/F64-2 IasonLabormedizin3/F64-3 Lohmann&Rauscher3/F72-1 VASEMA3/F72-2 WestMedica3/F72-3 Biomedica3/G64 ADVANTAGEAUSTRIA3/G64 SYMPTOMA/clickforknowledge

Visit us in hall 12/C63 with our new OR-Table “OTESUS 1160”!

4 MEDICA PHYSIO FORUM4/F05 tyromotion4/G05 intelligentmotion

15 HEALTH IT FORUM15 ECON FORUM15/G42 SpeechProcessingSolutionsGermany

6 MEDICA WOUND CARE FORUM6/E32 WEBSINGER6/F35 SemperitTechnischeProdukte6/J32 Moltoplast

8a COMPAMED HIGH-TECH FORUM8b COMPAMED SUPPLIERS FORUM8a/J07 z-microsystems8a/L01 SystemIndustrieElectronic8a/L04 STARLIM8b/D20 Mondi8b/E08 EGSTON8b/F03-1 WittmannBattenfeld8b/F03-2 abatec8b/F03-3 JOANNEUMRESEARCH8b/F03-4 AMACO8b/F03-5 ADVANTAGEAUSTRIA8b/F03-6 AT&SAustriaTechnology&Systemtechnik8b/L20 Feller

16/A63 Ing.Sumetzberger17/C20-1 NovotechElektronik17/C20-2 alphatracemedicalsystems17/C20-3 Kohlbrat&Bunz17/C20-4 LenzingPlastics17/C20-5 ADVANTAGEAUSTRIA17/C20-6 EMS17/D20 ATOSMedicalSolution17/D20 BossardAustria17/D20 CNSystems17/D20 FerRoboticsCompliantRobotTechnology17/D20 HealthTechnologyCluster17/D20 Human.technologyStyria17/D20 LISA-LifeScienceAustria17/D20 MAGNASTEYR17/D20 Photonic17/D20 Remesco17/D20 Senseproduct17/D20 SteinbichlerAustria17/D20 StadlerSensorikCNC-Technik17/D20 Tirol/ClusterLifeSciencesTirol17/D20 WILD

12 MEDICA TECH FORUM9/C32 NesslerMedizintechnik9/C48 LeonhardLang10/B42 MidesMedizintechnik10/B49 EMTensor10/E29 TMAMedical10/G42 MICROS11/A22 BIEGLER11/F21 CARLREINER12/A23 METEKA12/C63 MAQUET12/D32 CMB13/A31 H+HSYSTEM13/B23 Marchhart14/A48 SCHRACKSECONET

CCDSüd CCDOst CCDPavillon

CCDOst

Eingang Nord/Mall Entrance North/Mall

Hallen/Halls1,2,3 Halle/Hall3

Labortechnik,Diagnostica Laboratoryequipment,diagnostics

Hallen/Halls4,5 Halle/Hall4

Physiotherapie/Orthopädietechnik Physiotherapy/orthopaedicequipment

Hallen/Halls5,6,7.0,7.1,7a Halle/Hall6

Bedarfs-undVerbrauchsartikel,Textilien Disposables,commoditiesandconsumergoods,textiles

Hallen/Halls8a,8b Halle/Hall8a

COMPAMED Hightechsolutionsformedicaltechnology

Halle/Hall8b

Hallen/Halls9 –14 Halle/Hall12

Elektromedizin,Medizintechnik, OP-TechnikundEinrichtung Electromedicine,medicaltechnology, operatingtechnologyandequipment

Krankenhauseinrichtung,Kommunikations-Systeme Hospitalequipment,communicationsystems

Halle/Hall15 Halle/Hall15

Informations-undKommunikationstechnik Informationandcommunicationstechnology

Hallen/Halls16,17

NationaleundinternationaleGemeinschaftsstände, Elektromedizin,Medizintechnik Nationalandinternationaljointparticipants, electromedicine,medicaltechnology

MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de

Messe Düsseldorf GmbH Postfach 1010 0640001 DüsseldorfGermanyTel. +49(0)211/45 60-01Fax +49(0)211/45 60-6 68www.messe-duesseldorf.de

SUPPLIERSFORUM

by

TECHFORUM

DeutscherKrankenhaustag

Änderungenvorbehalten/Subjecttoalteration

HEALTH ITFORUMMEDICA MEDIA

ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07

Änderungen vorbehalten/Subject to alteration

HAll PlAn2013


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07

MEDICA

20 – 22 Nov 201310.00 – 18.30 h

23 Nov 201310.00 – 17.00 h

www.medica.de

COMPAMED

20 – 22 Nov 201310.00 – 18.30 h

www.compamed.de


CCDOst










Halle/Hall8b






Hallen/Halls16,17


MEDICA

14 –16Nov201210.00 –18.30h

17Nov201210.00 –17.00h

www.medica.de

COMPAMED

14 –16Nov201210.00 –18.30h

www.compamed.de


SUPPLIERSFORUM

by

TECHFORUM




ECONFORUM

ESPRIT arena/

med1201_01133.indd 1 19.07.12 16:07

Änderungen vorbehalten/Subject to alteration


PocketPlan

Entg

eltl

iche

Ein

scha

ltun

gT he Health Technology Cluster (HC) counts 215 partners and is Austria’s largest network in this field. For more than ten years, the HC supports cooperation and networking. In order to be able to exploit synergies the focus is on cooperation among companies, medical institutions, re-

search & development facilities and end-users. The scope of activities includes medical electronics, software, clean room & hygiene, hospital equipment, end-user products, diagnostics-pharma and ma-terials (metal/plastics). Find out more at the group stand LISA or via www.gesundheits-cluster.at.

The Health Technology Cluster – the network for medical technology

16/A63Ing. Sumetzberger GmbH Leberstraße 108, A-1110 WienT: +43(0)1/740 [email protected]: Ing. Michael Kü[email protected]

4/G05intelligent motion gmbh Franzosenhausweg 51, A-4030 LinzT: +43(0)732/371 [email protected]: Elisabeth [email protected]: +43(0)699/173 234 03

Sumetzberger stands for marked customer orientation, innovation, versatility and highest quality. As an independent family business, we are one of the most renowned industrial companies in Austria and one of the leading manufacturers of pneumatic tube systems internationally. As a reliable partner, we convince our customers with comprehensive expert knowledge, direct availability, and the highest quality in all areas as well as with the ability to quickly react to individual requirements.

The company was founded in 2009 and is currently working in the areas “im-sports” concerned with the development and production of innovative training and measurement devices for top-level and popular sports and “im-rehabilitation” responsible for developing high quality rehabilitation robots for neurological rehabilitation, for example the “hirob“, which allows a safe, economic and effective implementation of the automated hippo therapy.


CompanyProfiles

8b/F03-3JOANNEUM RESEARCH Forschungsgesellschaft mbHLeonhardstraße 59, A-8010 GrazT: +43(0)316/[email protected]: DI Dr. Stefan Kö[email protected]

17/C20-3Kohlbrat & Bunz GmbH Loretostraße 4-8A-5550 RadstadtT: +43(0)6452/719 [email protected]

9/C48Leonhard Lang GmbH Archenweg 56A-6020 InnsbruckT: +43(0)512/334 [email protected]: Bettina Sarlay

17/C20-4Lenzing Plastics GmbH Werkstraße 2A-4860 LenzingT: +43(0)7672/[email protected]

JOANNEUM RESEARCH actively cooperates with the business sector to generate innovations. A focus of the institute “MATERIALS” are diamond-like carbon coatings that gain increasing importance due to their unique and outstanding properties. Amongst other applications these coatings can also be used for artificial implants in medicine. Furthermore chemical and biosensors in combination with surface modification and printing methods are developed at the institute.

Manufacturer of rescue equipment and medical devices. Products for vacuum immobilization, RedVac mattresses, splints, pillows for emergency rescue. MedVac positioning mats for MRI scan and during surgery. UT2000, universal applicable transport stretcher, light-weighted, rescue in steep terrain, helicopter transport. RollUP, rollable stretcher, light-weighted, rescue in steep terrain, helicopter transport.

We design, manufacture and distribute products for ECG, electro-surgery, defibrillation and stimulation as well as gels and fixations. As part of our commitment to provide the highest quality service and products and our desire to meet your future requirements, we have formed strong partnerships with renowned companies around the world. Our quality management system is certified according to ISO 9001, ISO 13485 and ISO 13485 CMDCAS and for some product lines to Annex II of the European Medical Device Directive. We also operate an environmental management system certified to ISO 14001.

Lenzing Plastics is beside other activities one of the world‘s leading producer of fluoropolymer yarns, fibers and films.For the medical industry we manufacture PTFE suture yarns mainly used in cardiovascular and dental applications.Another application of our Lenzing PROFILEN PTFE yarns are garments for Psoriasis patients as well as bedsheets for Decubitus prevention. Also wound care products are in our focus of suitable applications for the strength of PTFE yarns - absolutely low friction, very soft, highly biocompatible.

17/D20LISA - Life Science Austria Ungargasse 37, A-1030 WienT: +43(0)1/501 755 [email protected]: Eva Maria [email protected]

Life Science Austria (LISA) promotes the life science sector in Austria on the international stage and is the first point of call for enquiries relating to it. Organised through the regional life science clusters - ecoplus, Health Technology Cluster, LISAvienna, Human Technology Styria and Cluster Life Sciences Tirol, LISA represents companies in the therapeutic, medical technology and diagnostic sectors as well as providers of enabling technologies. LISA is run by Austria Wirtschaftsservice GesmbH (aws) on behalf of the Federal Ministry of Economy, Family and Youth.


CompanyProfiles

In 2014 meet LISA at >>

Advancing Austrian life science //at the heart of Europe

Visit us at Medica 2013

Booth 17 D20

www.LifeScienceAustria.at

BIO-Europe Spring // Turin // March 10-12EuroMedtech // Linz // May 07-08MEDTEC Europe // Stuttgart // June 03-05BIO International Convention // San Diego // June 23-26CPhI Worldwide // Paris // October 07-09BIO-Europe // Frankfurt // November 10-12Medica // Duesseldorf // November 12-15

Ins_210x148,5_MESSEN2014_Medica2013.indd 1 09.08.13 15:01

3/F64-3Lohmann & Rauscher GmbH Johann-Schorsch-Gasse 4A-1141 WienT: +43(0)1/576 [email protected]

17/D20MAGNA STEYR Engineering AG & Co KG Liebenauer Hauptstraße 317, A-8041 GrazT: +43(0)316/[email protected], www.magnasteyr.comContact: DI Johann [email protected]: +43(0)664/884 076 62

Lohmann & Rauscher (L&R) is a leading international supplier of high quality medical devices and hygiene products – ranging from conventional bandages to modern treatment and nursing systems. Created in 1998 from the merger of two long-established companies, Lohmann (founded in 1851) and Rauscher (founded in 1899), L&R have over 160 years expertise as a dependable partner and solution provider for its customers.

MAGNA STEYR, the worldwide leading brand-independent engineering and manufacturing partner for the automotive, aviation, aerospace and medical engineering industries. In the field Medical Systems, innovative and highly flexible customized solutions with a focus on diagnostic imaging are developed.Our range of services includes: • Virtual development • CAD design • Thermal management • Electronics, hardware & software • Measurement engineering (also acoustics, EMC) • Design

13/B23Marchhart GmbH Fabriksgelände 6, A-7201 Neudörflwww.marchhart-air.deContact: Ing. Michael [email protected]: +49(0)151/524 666 64

Marchhart LLC is a traditionally run family company, established in 1968 in Austria. In the field of air filter technology Marchhart LLC offers a wide range of components for hospitals, pharmacies, laboratories and the optical industry. High quality air filter systems guarantee clean air for the protection of people and products. Company’s concept is to offer a complete package: Starting with demand assessment and consulting in the pre-planning stage, followed by support in planning execution through product fabrication up to assembly assistance and commissioning.

CompanyProfiles

3/F56-4Mobilitas Health Group Forschungs- und Ver-triebs GmbHAm Thalbach 3, A-4600 ThalheimT: +43(0)7242 65162-15www.mobilitas-group.comContact: Karoline Reiter [email protected]

3/F56-2MED TRUST HandelsgesmbH Gewerbepark 10, A-7221 MarzT: +43(0)2626/641 [email protected]: Mag. Sylvia [email protected]

10/G42MICROS Produktions- & HandelsgesmbH Hunnenbrunn, Gewerbezone 5A-9300 St. Veit/GlanT: +43(0)4212/309 [email protected]: Herbert [email protected]

12/A23METEKA GmbH Viktor-Kaplan-Straße 7, A-8750 JudenburgT: +43(0)3572/[email protected]: Mag. Andreas [email protected]

Distribution of medical therapy bandages (Zl.4357-44/12).The business idea is to introduce the STAUDT therapy as a form of therapy, outside of Austria.Our therapy bandages should be worn loosely fitted over NIGHT. STAUDT-therapy-bandages are unique in design and effect, because of the patented Mobitex ®fabric. We offer a holistic therapy concept consisting of therapy cuffs, skin nourishing gel and dietary supplement drink.

MED TRUST is an Austrian manufacturer and international diabetes specialist which offers new innovative products for diabetes in humans and diabetes in animals. The Austrian company is internationally present with its own high-quality diabetes brand Wellion. MED TRUST is a family business, was founded in 1997 and includes companies in Austria, Germany, Sweden, Greece, Czech Republic, Bulgaria, Ukraine, Slovakia, Slovenia, and office in India. Our goal is to make life easier for patients and partners with innovative ideas, advice and service.

Company MICROS has been founded in February 1994 and is mainly producing and trading microscopes and microtomes for most fields of application for microscopes in both the life science and the material science sector. The product range extends from small models for schools and education and routine laboratory work up to highly professional microscopes for complex applications. Stereo microscopes and digital hand-microscopes are part of the wide product range as well as various documentation systems. The ISO 9001 certification underlines the commitment of the company to maintain consistent standards of quality and competence in its dealing with its partners.

METEKA stands for excellent knowledge and reliable products for the treatment of infectious waste and waste water. The METEKA hygiene and infection prevention system reduces hospital acquired infections and offers a safe, economical and environmentally friendly solution. METEKA has succeeded in establishing a successful market presence in the field of hygiene and disposal, both in Austria and internationally.

10/B42Mides Medizintechnik GmbH Weinholdstraße 33A-8010 GrazT: +43(0)316/426 [email protected] www.mides.com

MIDES is specialized in providing everything about medical ultrasound systems and can look back to almost 20 years of experience. The company exports its equipment to over 40 countries worldwide and has become the specialist for the repair of ultrasound probes by establishing a special high-tech laboratory. As the leading European service provider MIDES is able to repair cost-effectively electronic, mechanical, and other defects. MIDES is certified according to ISO 9001 and ISO 13485.


CompanyProfiles

6/J32Moltoplast GmbH Egger-Lienz-Straße 130, A-6020 InnsbruckT: +43(0)512/585 [email protected]: Denise Unterwurzacher

Moltoplast was founded in 1955 as the first foam processing plant in Austria. The facilities in Austria were regularly expanded up to a total area of more than 10.000 m2, used for production and storage. The healthcare division manufactures and sells worldwide healthcare products as care-mattresses and positioning aids. In 2007 the wound care and decubitus prophylaxis product momosan® was authorized for the EU and worldwide distribution was successfully started. momosan® has a very advantageous price in combination with a simple application and the product safety standard of an European medical product of class IIb.

8b/D20Mondi Europe & International Kelsenstraße 7, A-1032 WienT: +43(0)1/79013-0Contact: Etienne [email protected]

Mondi Kraft Paper, part of Mondi Group, is a leading European supplier of a wide range of kraft paper and bleached as well as unbleached market pulp. We have a highly experienced research and development workforce with full capabilities in both base paper and coatings development. The knowledge center for medical paper packaging is situated in Lohja, Finland, but our global sales office network ensures that there is always a Mondi partner close to you. We supply various grades of paper for sterilisation purposes offering excellent viral barrier properties to the medical and hygiene industries. By way of extensive product testing, mill audits and customer approvals, we meet the strictest international product specifications.

9/C32Nessler Medizintechnik Egger-Lienz-Straße 1dA-6020 InnsbruckT: +43(0)512/940 34 [email protected]

Since 1993 Nessler Medizintechnik (a former division of Swarovski) has been manufacturing and distributing medical equipment such as swaromed ECG electrodes, SWAROPLATE and TWIN-SAFE neutral electrodes for electro surgery, swaro-safe sterile venous cannula attachments and swaro-pad defibrillator electrodes. These quality products are exported worldwide and also produced under other brand names as OEM products. All products have the CE-mark since Nessler Medizintechnik is certified according to EN ISO 13485 / EN ISO 9001.

· Cluster Life Sciences Tirol Standortagentur Tirol· www.standort-tirol.at/lifesciences

Hier geht’s zum Download des aktuellen Branchenkatalogs der Tiroler Medizintechnik!

Medizintechnik Made in Tirol

Stark, vielfältig und innovativ!

STAGT_Medizintechnik_made_in_Tirol_Inserat_180x121_02.07.2013_LV.indd 1 02.07.13 16:38


CompanyProfiles

17/D20Remesco Handelsgesellschaft mbH Grinzinger Allee 5/25, A-1190 WienT: +43(0)1/328 50 [email protected]: Mag. Franz [email protected]

14/A48SCHRACK SECONET AGEibesbrunnergasse 18, A-1120 WienT: +43(0)1/81157 [email protected]

17/C20-1Novotech Elektronik GmbH & Co.KG Freistädter Straße 38A-4210 GallneukirchenT: +43(0)7235/63888-15www.novotech.atContact: Franz [email protected]

1/C40Norma-X Röntgendiagnostika GmbH Ameisgasse 49-51/2A, A-1140 WienT: +43(0)1/914 85 [email protected]: Gabor Kollanyi

Remesco distributes high quality examination, surgical and specialty gloves as well as Foley Catheters all over Europe. At MEDICA we will focus on the launch of the new hygiene packaging and dispensing concept “Safedon Cuff First” for examination gloves. As gloves are dispensed individually, without touching gloves outer surface from the Safedon dispenser (cross) contamination is reduced to an absolute minimum. Innovative box design allows doubling box quantities leading to reduced cardboard waste and logistic expenses.

Schrack Seconet AG is an Austrian high-tech company specializing in communication and nurse call systems for hospitals and residential homes. To develop, manufacture and implement the most modern, safest, and most reliable communication systems for their customers is the challenge that Schrack Seconet faces on a daily basis. The company offers future-proof communication systems which reduce staff workload in hospitals and help to make hospital stays for patients as comfortable as possible.

Novotech Elektronik is mainly involved in selling electromedical devices, special in selling Rehatron Alpha.

Norma Diagnostika is a young company that focusses on in-vitro diagnostics. Norma Diagnostika operates internationally from its headquarters in Vienna and has an impressive track of high products quality and excellent service. The company and its affiliates currently have 120 employees with many years of experience in developing, producing and distributing laboratory diagnostic equipment and reagents. The product range consists of analyzers and reagents for clinical chemistry, hematology and also coagulation and urine diagnostics in human and veterinary medicine.

17/D20Photonic Ges.m.b.H. & Co. KG Seeböckgasse 59, A-1160 WienT: +43(0)1/48656 [email protected]: DI Wolfgang Brü[email protected]

Photonic offers highly competitive functional products of world-leading quality, with above-average investment in research and development. This is reflected in an impressive number of patents. Our intelligent solutions for lighting technology and opto-mechatronic products for use in different fields of applications make us a top-ranking player on the global market.


CompanyProfiles

02

01

03

Biobanking and biomarker technologies

Pharmaceutical engineering and production processes

Advanced biomedical sensor technology and biomechanics02

03

01

Styria is a powerhouse of innovation offering the very best in resources for a fl ourishing life science industry.

Networking with a smile

Hotbed of Human Life Science Technology

Kofinanziert von der Europäischen UnionEuropäischer Fonds für Regionale Entwicklung (EFRE)

Investitionen in Ihre Zukunft

Inserat_medical_booklet_2013.indd 1 25.06.2013 11:16:18

6/F35Semperit Technische Produkte Gesellschaft mbHModecenterstraße 22, A-1031 WienT: +43(0)1/797 775 [email protected]: Mag. Andreas Wöss

17/D20Sense product GmbH – medical & sport technologyLandstraßer Hauptstraße 34, A-1030 WienT: +43(0)1/718 [email protected]: Marco [email protected]: +43(0)699/144 412 34

Sempermed is the largest segment of the Semperit Group and is ranked among the international leading manufacturers of medical and industrial gloves. The high quality standard of Semperit gloves impresses purchasers world-wide. European knowhow, environmentally friendly high-tech production and comprehensive quality management guarantee maximum safety and reliability, coupled with an optimum price-performance ratio.

Founded in 2007, Sense product GmbH develops innovative technology for therapeutic training equipment, used for both rehabilitation and high performance sports. The internationally active company is highly committed to innovation, vitality, and ingenuity. Sense product is a global trailblazer in the following areas: • physical and neuro-physical medicine • medical fitness and fall prevention • high performance sports • coordination • sensorimotor functions

15/G42Speech Processing Solutions Germany GmbH Tauentzienstraße 9-12, D-10789 BerlinT: +49(0)30/2639595-0www.dictation.philips.com/de/Contact: Marc [email protected]

Speech Processing Solutions is the world leader in professional digital and analogue dictation solutions. From office-based desktop dictation to mobile dictation, from conference recording to entire workflow solutions with the SpeechExec software family, our Philips products support every imaginable scenario for the medical branch. Revolutionary digital dictation products, such as the Philips SpeechMike Premium and the new Philips Pocket Memo with integrated Barcode Scanner are helping professionals to work more efficiently every day, in the easiest possible manner.


CompanyProfiles

8a/L04STARLIM Spritzguss GmbH Mühlstraße 21A-4614 MarchtrenkT: +43(0)7243/585 [email protected]

17/D20Steinbichler Austria GmbH Technologie- und Wirtschaftspark InnsbruckEduard-Bodem-Gasse 5-7, 6020 InnsbruckT: +43(0)512/363631-1info@steinbichler-austria.atwww.lukotronic.comwww.steinbichler-austria.at

17/D20Stadler Sensorik CNC-Technik GmbH Gewerbepark Süd 2, A-8121 DeutschfeistritzT: +43(0)3127/40930 [email protected]: Viktoria [email protected]: +43(0)676/318 40 94

starlim//sterner manufactures parts for the medical industry, the pharmaceutical sector and the baby-article industry. The cleanroom manufacturing and state of the art production conditions guarantee the highest levels of processing quality. Clean, hygienic and process-secured.

Steinbichler Austria GmbH, located in Innsbruck/Austria, develops, manufactures and markets motion capture systems for analyzing people and object motions. The optical, real-time 3D-motion capture systems are based on infrared-cameras which are supported by the capturing and analysis software. Motions of active markers that are mounted on a person or an object are measured by the camera system; thus, the motion can be exactly analyzed.

We are specializing in the production of precision turned and milled parts. Our manufactured parts are used in the fields of medical technology, aviation technology and measuring technology. Quality management according to ISO 2001:2008

17/D20Standortagentur Tirol/Cluster Life Sciences TirolIng. Etzel-Straße 17/2, A-6020 InnsbruckT: +43(0)512/576 262 [email protected]: DDr. Petra Stö[email protected]: +43(0)676/843 101 24

Tirol is one of the major Life Science regions in Austria with globally operating companies, renowned universities and research centers, highly skilled and motivated employees as well as above-average funds for scientific research. The Cluster Life Sciences Tirol coordinates a strong network of partners and the sector’s activities. The medical technology sector boasts a particularly diverse spectrum of expertise in the cluster. Furthermore, the investor services of Standortagentur Tirol offer an extensive service free of charge for those companies interested in Tirol as business location. The Cluster Life Sciences Tirol is financed by the Region of the Tirol and the European Regional Development Fund (ERDF).

3/G64SYMPTOMA / click for knowledge GmbH Jakob-Haringer-Straße 15020 SalzburgT: +43(0)662/[email protected]

Symptoma is a medical search engine for diseases. Physicians can enter symptoms, age and sex and receive a list of matching differential diagnoses - weighted by their probability for their patients. http://www.symptoma.com


CompanyProfiles

8a/L01System Industrie Electronic GmbH Millennium Park 12 , A-6890 LustenauT: +43(0)5577/899 [email protected] , www.sie.atContact: Josef Krojer, T: +49(0)871/965 780 710

3/F56-1Technoclone GmbH Brunner Straße 67, A-1230 WienT: +43(0)1/863 [email protected]: Veronika Binder

S.I.E is a 220 staff strong development and manufacturing partner for the medical devices industry. Specializing in computer technologies and electronics S.I.E provides customer specific assemblies and turnkey medical devices to leading OEMs. S.I.E Medical HMIs, the company’s latest product range, combine highest quality industrial design, newest user-interface-technologies with medical device grade engineering and manufacturing.

Technoclone is a world leading producer not only of ELISA systems but also of global and special coagulation tests, control and reference plasmas and protein and lipid diagnostics. With Ceveron® alpha, a fully automated coagulation analyzer, the portfolio has been completed. Another innovation is the Ceveron® MFU500, a micro particle filtration unit which can identify micro particles thrombogenicity in conjunction with the assay Technothrombin® MP.

10/E29T.M.A. Vertriebsgesellschaft mbHTMA Medical Voellegg 13, A-8654 FischbachT: +43(0)3865/[email protected], www.tma-medical.comContact: Patrick Sellem

The Mobile Care Unit (MCU) is a unique multi device examination system designed for e-health and telemedicine application. Operated on a Multilanguage user interface via a touch screen panel, the MCU provides a wide range of examinations and is easy to customize/interface to existing telemedicine platforms. EMR integrated (import/export to hospital standard). Modern communication allows automatic synchronization with a central data base. Compact packaging and ready to use. Ideal for remote areas, screening population, second opinion, teleconsultation, emergency.


CompanyProfiles

3/F72-1VASEMA GmbH Brunner Straße 67/4, A-1230 ViennaT: +43(0)1/890 48 33 [email protected]: DI Peter [email protected]

6/E32WEBSINGER GmbH Johann-Galler-Straße 15, A-2120 WolkersdorfT: +43(0)2245/[email protected]: Ruth [email protected]

3/F72-2West Medica Produktions- und Handels GmbHFranz-Siegel-Gasse 1, A-2380 PerchtoldsdorfT: +43(0)1/804 81 [email protected]: Mag. Marie [email protected]

3/F56-3ViennaLab Diagnostics GmbH Gaudenzdorfer Gürtel 43-45A-1120 ViennaT: +43(0)1/812 01 [email protected]: Mariella Vicente de Hübner

VASEMA is a manufacturer of high-tech medical devices designed for the usage in skin diagnostics. The first product - dermaMeter® professional 100 - represents a real milestone in this area. The patented technology of the dermaMeter® allows the reliable and objective determination of the patient´s skin health in a few seconds. The company´s objective is to provide solutions for the global challenges concerning health care. Efficient and always up-to-date diagnostic methods are the substantial prerequisites for VASEMA to cope with the future health care requirements.

In 1982 Websinger medical technology was founded as family-owned enterprise. The company based in Lower Austria has specialized in the production of sterile covers for devices as well as the Patient Warming System PWS 72000. The product range of merchandise extends from surgical drainages of biosynthetic vascular grafts and shunts as well as otolaryngology and urological products. Since 2009 Websinger has become business partner of Premier Guard, a specialist for single-use covers for devices.

West Medica, founded in 1993 and headquartered in Perchtoldsdorf, specializes in the manufacture and distribution of diagnostic equipment. WM Group produces a complete line of equipment for the digital Pathology, Vision Microscopy. Our market experience supported by close cooperation with our dealers enables us to produce and supply high quality medical products.

ViennaLab develops, manufactures and exports worldwide in vitro diagnostic tests for inherited diseases and genetic predispositions, pharmacogenetics and oncology. The company offers “StripAssays” for Cardiovascular Disease, Thalassemia, Familiar Mediterranean Fever, Alzheimer, Sugar & Lactose Intolerance, etc; pharmacogenetics and oncology tests which help to predict a patient’s response to different drug and cancer therapies: i.e. anti-coagulation, breast, colorectal, lung and thyroid cancer, melanoma therapy, etc. For more information visit www.viennalab.com

4/F05tyromotion GmbH Bahnhofsgürtel 59, A-8010 GrazT: +43(0)316/908 [email protected]: Mag. Elisabeth [email protected]: +43(0)660/507 91 33

tyromotion has become one of the world’s leading suppliers of innovative, pioneering, robotics-supported rehabilitation devices in the neurological rehabilitation sector. The tyrosolution: the Amadeo® (robotic finger rehabilitation), Diego® (robotic arm rehabilitation), the Pablo® System (active hand-arm-shoulder rehabilitation) and the Tymo® (therapy plate) guarantee targeted, holistic and successful training of upper extremities and the whole body.


CompanyProfiles

COMMITTEDEXPERTS

Besuchen Sie unseren Stand auf derVisit us at our stand at

MEDICA 2013 - Halle 3 und Halle 17COMPAMED 2013 - Halle 8B

ADVANTAGE AUSTRIA is the official Austrian trade promotion organisation. With more than 110 offices in over 70 countries we help over 50,000 Austrian

businesses develop their international markets and promote their products and services around the world.

We provide hands-on, practical support for international businesses wishing to build partnerships with and invest in Austria.

www.advantageaustria.org

8b/F03-1Wittmann Battenfeld GmbH Wiener Neustädter Straße 81A-2542 KottingbrunnT: +43(0)2252/[email protected]: Werner Eibl

8a/J07z-microsystems Hoechster Straße 8, A-6850 DornbirnT: +43(0)5572/72 [email protected]: Harald Denz [email protected]

WITTMANN BATTENFELD, a company of the WITTMANN group is a leading manufacturer of injection molding machines and equipment for the plastics industry. With its own sales and service companies as well as representations in about 60 countries, WITTMANN BATTENFELD provides optimal support to its customers in all matters concerning injection molding technology. Our innovative strength, highest precision and strong focus on maximum customer benefit make us a valuable partner for our customers.

z-microsystems is focused on moulding parts for the medical industry (LOC and / or microfluidic) under clean room conditions. We support our customers by giving input for the development of their parts, designing an optimized mould-concept, producing the injection-mould as well as producing the first samples to finally assume responsibility for mass production with coating and bonding process. z-microsystems is certified by ISO 9001 and ISO 13485.

17/D20WILD GmbH Wildstraße 4, A-9100 VölkermarktT: +43(0)4232/2527-136www.wild.atContact: Diethard [email protected]

WILD is the first choice in medical technology when it comes to the development, manufacturing and service of opto-mechatronic systems and devices. With over 40 years of expertise, WILD and its client-partners have already introduced multiple new products.

WILD – THE MOST TRUSTED COMPANY


CompanyProfiles

22.0

8.20

13 ·

MED

ICA

2013

/ A

llgem

ein

· De

utsc

hlan

d ·

210

x 29

7 +

3mm

·4c

· M

esse

_DSS

D

Be part of the No. 1!

20 – 23 Nov 2013Düsseldorf • Germany

www.medica.de

22.08.2013_MEDICA 2013_Allgemein_Deutschland_210 x 297 + 3mm_4c_Messe_DSSD.indd 1 22.08.13 09:18

Medica 2013 Exhibitor Catalogue

Documents

Transcript of Medica 2013 Exhibitor Catalogue