LTV™ 1200 vent i lator emergency set-up card

For 24-hour assistance, call 800.754.1914

AC adapter

(Use AC power when available).

SprintPack Lithium-Ion

Power System

Step 1: Choose a power source.

Step 2: Connect the LTV® 1200 ventilator to the power source.

• Open bag.

• Remove patient circuit and 22 mm adapter from bag.

Humidifier circuit (optional)

22 mm patient circuit, adult

>20 kg

>44 lb

22 mm adapter

To patient

Sense lines/To ventilator

To ventilator

15 mm patient circuit, infant/pediatric 5 kg to ≤ 20 kg 11 lb ≤ 44 lb

22 mm adapter

To patient

Sense lines/To ventilator

To ventilator

Step 3: Choose a circuit.

For 24-hour assistance, call 800.754.1914

Step 4: Connect the circuit to the LTV 1200 ventilator.

Attach 22 mm adapter

(found in circuit bag). Connect circuit to 22 mm adapter.

Filter optional

Turn clockwise.

Step 5: Connect the sense lines to the LTV 1200 ventilator.

On/Standby

Step 6: Turn on the LTV 1200 ventilator.

For 24-hour assistance, call 800.754.1914

Step 7: Patient setting displays.

Once the power is on, see Same Patient display.

Step 8: Change display to the New Patient setting.

Select

Rotate Set Value knob

clockwise until New

Patient is displayed.

Press Select when New Patient

is displayed.

Note: If you make a mistake, turn the LTV 1200 ventilator

off by holding the On/Standby button for three seconds.

Then return to Step 6.

Press Select when proper patient

size is displayed.

Step 9: Set patient size.

Select

Rotate Set Value

knob to correct patient

size (infant, pediatric or

adult).

For 24-hour assistance, call 800.754.1914

Step 10: Connect circuit to ET tube or mask.

ALARM notice: The LTV 1200 ventilator

will alarm until it is connected to the

patient. To turn it off, you may press the

Silence/Reset button.

Silence/

Reset

For 24-hour assistance, call 800.754.1914

ET tube Mask

Connect to patient.Connect elbow to mask.Choose a mask (pediatric or adult).

Step 11: Optional: Use a mask.

Pediatric Adult

Step 12: Optional: Use an HME and/or flextube as shown for patient comfort.

Flextube

HME

This emergency set-up card is intended to provide emergency

instructions for initial LTV 1200 ventilator set-up. The initial settings

may need to be adjusted based on the patient’s clinical condition.

For complete information regarding set-up and operation, refer to

the LTV 1200 ventilator operator’s manual.

For global distribution.

©2020 Vyaire. Vyaire, the Vyaire logo and all other trademarks or registered trademarks are property of Vyaire Medical, Inc., or one of its affiliates. Medical devices class IIa according to Medical Devices Directive 93/42/EEC. Please read the complete Instructions For Use that come with the devices or follow the instructions on the product labelling. VYR-GBL-2000138

1. The current legal manufacturer is Carefusion. The legal manufacturer will change to Vyaire Medical when Vyaire branded labels are released.

G L O B A L H E A D Q U A R T E R S

Vyai re Medica l , Inc.26125 North Riverwoods BlvdMettawa, I L 60045 USA

vyaire.com

EMERGO EUROPEPr insessegracht 202514 AP The HagueThe Nether lands

A U S T R A L I A N S P O N S O R

Vyai re Medica l Pt y LtdSu i te 5.03, B u i ld ing C1 1 Ta lavera RoadMacquar ie Park , NSW 21 13Aust ra l ia

Vya i re Medica l , Inc. 126125 North Riverwoods BlvdMettawa, I L 60045 USA