Label Sticker Artwork Specification 3 Artwork Specification Label Sticker Artwork Specification...

download Label Sticker Artwork Specification 3 Artwork Specification Label Sticker Artwork Specification Cutting

of 12

  • date post

    10-Aug-2020
  • Category

    Documents

  • view

    7
  • download

    0

Embed Size (px)

Transcript of Label Sticker Artwork Specification 3 Artwork Specification Label Sticker Artwork Specification...

  • Example 1 Example 2

    2mm

    102mm

    96m m

    92m m

    98mm

    Safe Zone

    2mm

    2mm 2mm

    Die-line (Actual Artwork Size) Safe Zone Full Bleed

    IMPORTANT

    1. Safe Zone: Vital elements of artwork MUST BE within the Safe Zone, 2mm from all sides of die-line. 2. Full Bleed: Expand your background design (bleeding), 2mm from all sides of Artwork Height & Width dimension. 3. Please refer to the example below how to determine your Artwork Size, Safe Zone & Full Bleed.

    www.excard.com.my

    1

    Label Sticker Artwork SpecificationArtwork Specification

    Content Page No.

    Safe Zone, Bleeding, Die Line

    Preparing File for Label Sticker with Die Line Artwork Specification

    Die Line Precautions

    Gap Between Multi-edges Die Line

    1 Colour Label Sticker

    White Color Printing, Artwork Preparation for OPP with White Ink

    Important Notes In Preparing White Base Artwork

    1

    2

    3

    4

    5

    6

    7

    Important Notes For Waste Removal Finishing

    Multiple Die Line Label Sticker Artwork File Preparation Method 10 - 12

    Multiple Die Line Label Sticker

    8

    9

    SAFE ZONE, BLEEDING, DIE LINE

    Example:

    Actual Artwork Size 98mm x 92mm (Input at Ordering Page) Full Bleed Size 102mm x 96mm Safe Zone 2mm from all sides of die-cut edge

    Input the artwork actual size at Ordering Page when you place order.

    Let’s say your artwork = 98mm x 92mm

    Safe Zone

    2mm

    102mm

    96m m

    92m m

    98mm

    2mm

    2mm 2mm

  • Step 1

    Step 2

    Step 3

    PREPARING FILE FOR LABEL STICKER WITH DIE LINE ARTWORK SPECIFICATION

    File 1: File 2: File 3:

    File 1: Full artwork with artwork and die line for die-cut.

    File 2: Artwork to be printed only.

    File 3: Die line with transparent background. (JPEG file not accepted). Note: · Ensure die line is positioned accurately (as per File 1) to avoid mis-registration. · You MUST fill the Die Line in PROCESS COLOUR (C: 100, Y: 100, M: 0, K: 0) & Line Stroke: 1.0pts. · Save your file with transparent background.

    Upload your artwork to place order.

    Zip all PDF files together (In zip format)

    Combine and save into 1 PDF file (3 pages)

    www.excard.com.my

    2

    Label Sticker Artwork SpecificationArtwork Specification

  • www.excard.com.my

    3

    Label Sticker Artwork SpecificationArtwork Specification

    Cutting Edge Tolerance: + - 1mm

    DIE LINE PRECAUTIONS

    Scenario 1: What happens when die line falls exactly on the artwork line

    Below are mis-registration scenario that can be happen during the die-cut process when die line is not correctly placed, as + - 1mm cutting edge tolerance has to be taken into consideration.

    What happens when die line is exactly on different colour background. Scenario 2:

    When die line is exactly on artwork line, the result is, die cut may not align accurately during the die-cut process.

    Solution : Allow min. 2mm between artwork line and die-cut line.

    When the artwork is prepared with the die line as shown below, the final outcome may look like the picture shown on the right.

    * Member is advised to revise artwork when these problems are detected. * Excard shall not be held liable for any of defect in printing outcome due to artwork sent not correctly prepared as advised.

    Min 2mm

    Solution : (a) Fill the background with White (b) Fill the background with Red OR

    OR

  • www.excard.com.my

    4

    Label Sticker Artwork SpecificationArtwork Specification

    GAP BETWEEN MULTI-EDGES DIE LINE

    How to define “Multi-Edges Die Line” - More than 5 cutting edges within 10mm.

    Shown below is the correct and incorrect multi-edge die-line edges:

    10mm

    10mm

    10mm

    10mm

  • www.excard.com.my

    5

    Label Sticker Artwork SpecificationArtwork Specification

    1 COLOUR LABEL STICKER

    Artwork with toning from 10% - 100% is allowed for 1 colour label sticker. For example:

    Cyan 100%

    Cyan Artwork With Toning

  • www.excard.com.my

    6

    Label Sticker Artwork SpecificationArtwork Specification

    WHITE COLOR PRINTING

    White color is only available for OPP and not available for other stickers. Printed stickers will show white color due to sticker surface color are white (MKPS, PRPS, PPNG and SYPR).

    Yet for Transparent OPP sticker , since it is transparent, so printing without white ink will be see through if paste on colored surface.

    Baby Shampoo

    - It’s Shower Time -

    500ml

    Gentle Cleaning for Hand & Body

    Paste on yellow colored surface Wording area will be see through due to printing skip on white color area

    Printed OPP Sticker without White Ink

    ARTWORK PREPARATION FOR OPP WITH WHITE INK

    For order with 4C + White Page 1: Overview artwork (Printable artwork and Dieline) Page 2: White artwork with Process Black Colour (K100) Page 3: Printable artwork only (CMYK) Page 4: Dieline only

    For order with White (1C) Page 1: Overview artwork (White artwork and Dieline) Page 2: White artwork with Process Black Colour (K100) Page 3: Dieline only

    Baby Shampoo

    - It’s Shower Time -

    500ml

    Gentle Cleaning for Hand & Body

    Printed OPP Sticker with White Ink

    Baby Shampoo

    - It’s Shower Time -

    500ml

    Gentle Cleaning for Hand & Body

    Wording area will be printed as white color *white ink printing might be not solid

    Actual Artwork

  • www.excard.com.my

    7

    Label Sticker Artwork SpecificationArtwork Specification

    -Fill the artwork with black (K100) to indicate the area for white base.

    -Rename colour to precisely “White” to indicate the area of white base instead “WHITE” or “white” *Excard will not held responsibility on any wrong white spot colour naming error. (eg. “WHITE” or “white”)

    -Only use Adobe Illustrator to prepare the white base artwork. -JPEG file format or JPEG save in PDF format is not allowed while prepare white based artwork.

    Rename the color swatch name by using Adobe Illustrator 1. Fill colour with K100 2. Double Click the colour at Swatches 3. At Swatch Option Choose Color Mode to "Spot Color" and rename the Swatch Name to "White. 4. Double confirm by checking the artwork is filled with K100 with "White" swatch name.

    IMPORTANT NOTES IN PREPARING WHITE BASE ARTWORK

    STEP 1

    STEP 3

    STEP 2

    STEP 4

    Fill colour with K100

  • www.excard.com.my

    8

    Label Sticker Artwork SpecificationArtwork Specification

    Artwork with square & rectangle shape MUST require minimum 2mm radius edge (round corner)

    IMPORTANT NOTES FOR WASTE REMOVAL FINISHING

  • www.excard.com.my

    9

    Label Sticker Artwork SpecificationArtwork Specification

    Artwork Dimension ( Refer to diagram)

    Please refer to the diagram below for the artwork dimension. For example, A4 size:

    297mm

    10mm

    210mm

    1.5mm bleeding for artwork Die cutting size for artwork 2mm safe zone for artwork 10mm safe zone for cut to size sticker Sticker product size

    * The gap between 2 trim lines must at least 3mm

    MULTIPLE DIE LINE LABEL STICKER

    Noted:

    3mm gap between 2 ups

    10 m

    m

  • www.excard.com.my

    10

    Label Sticker Artwork SpecificationArtwork Specification

    10mm

    MULTIPLE DIE LINE LABEL STICKER ARTWORK FILE PREPARATION METHOD

    Page 1: CMYK Printing + Die Line

    ABC ABC

    ABC

    ABC

    ABC

    ABC

    ABC

    ABC

    A B

    C A

    B C

  • www.excard.com.my

    11

    Label Sticker Artwork SpecificationArtwork Specification

    10mm

    Page 2: CMYK Printing

    ABC ABC

    ABC

    ABC

    ABC

    ABC

    ABC

    ABC

    A B

    C A

    B C

    MULTIPLE DIE LINE LABEL STICKER ARTWORK FILE PREPARATION METHOD

  • www.excard.com.my

    12

    Label Sticker Artwork SpecificationArtwork Specification

    10mm

    Page 3: Die Line

    MULTIPLE DIE LINE LABEL STICKER ARTWORK FILE PREPARATION METHOD

    Label-sticker 1 2 3 4 5 6 7 8 9 10 11

    08 09 10 11 12