1

: Repeat these same steps for all 4 corners.: Please ensure all your vital elements are located inside the Safe Zone lines.

NoteImportant

Preparing Round CornerArtwork and OrderArtwork Specification

Step 2:Choose the round corner type (position) that you want.

Step 1:Download the Product Size Template.

2.3 If your artwork is WITHOUT Round Corner, deselect the “Curve” position and ensure the “Corner” position is is selected.

2.1 Open the Product Size Template file, you will see these guidelines.

2.2 To get the round corner artwork guideline, deselect “Corner” position and ensure the “Curve” position is selected.

Adobe Illustrator CorelDraw

2

Step 3 :Delete all guidelines and save in PDF format.

Preparing Round CornerArtwork and OrderArtwork Specification

- Do a final check before saving your file in PDF.

- Your final artwork in PDF

Note : This is the actual round corner position, for either portrait or landscape. Round corner position is follow exactly as shown in ordering page diagram. No rotation required.

Note : Please remove all guidelines before save your PDF file.

Step 5 :Upload your round corner artwork to place order.

Step 4 :

Example : Round Corner 6mm > RC0611

Select the round corner type (position) in the ordering page according to your artwork.

Landscape Printing Portrait Printing