Know about analog and digital hardware devices
description
Transcript of Know about analog and digital hardware devices
Learn About Analog and Digital Hardware Devices
Take a look at various types of Analog and Digital hardware modules or
devices.
Types of Analog and Digital Hardware Devices
TEC controllers Laser drivers TEC modules Smt Capacitor Kits Thermistors
TEC Controllers
TEC (Thermo-Electric Cooler, or Peltier Cooler) is a semiconductor device which can cool down or heat up the temperature of a thermal load depending on the direction of the current going through the two terminals of the TEC.
TECA1-XV-XV-DEfficiency: 90%
Max. output current: 2.5A
TEC5V6A-DEfficiency: 90%
Max. output current: 6A
Laser drivers
Our laser drivers/controllers are designed for driving laser diodes with high stability, low noise, and/or high
power efficiency.
High Efficiency AC Input Laser Driver/Controller
High Current Low Pass Filter
Evaluation Board for 10A Laser
Driver/Controller ATLD10A5D
TEC Modules
Thermoelectric modules also known as Thermoelectric Coolers can generate both
heating or cooling thermal power when applying an electric DC current at different directions. When the current flows in one
direction, one of the peltier cooler's plates is heated up while the other is cooled down.
Examples of TEC Modules
This TEC (Thermoelectric Cooler)modules, ATE1-18, has
18 pairs of Peltier elements inside with a maximum voltage
of 2.3 Volt
This series of TEC modulesATE1-17,
has 17 pairs of Peltier elements inside with amaximum voltage of 2.2 Volt
This series of TEC modules, ATE1-07,have
7 pairs of Peltier elements inside with a maximum
voltage of 0.9 Volt
Smt Capacitor Kits
1206 size 112 value
50pc/value capacitor kit
1206 size 112 value
100pc/value capacitor kit
Thermistors
Name:ATH100KL2A
Key Features:
Glass Encapsulated for Long Term Stability & Reliability
High Stability: <0.1°C/Y
High Resistance Accuracy: 1%
Wide Temp. Range:−55°C to 250°C
Type 1
Thermistors
Type 2
Name:ATH10K1R25
Key Features:
Glass Encapsulated for Long Term Stability & Reliability
High Resistance Accuracy: 1%
Small Size:φ1.25mm×2.0mm
Wide Temp. Range:−40°C to 270°C
Thermistors
Type 3
Name:ATH10KL2B
Key Features:
Glass Encapsulated for Long Term Stability & Reliability
High Resistance Accuracy: 1%
Maximum Temp. Range:−40°C to 270°C
100 % Lead (Pb)-free and RoHS Compliant
Presentation Created by:-
For more Information visitwww.analogtechnologies.com