kalupne Masine
-
Upload
dejan-ilic -
Category
Documents
-
view
238 -
download
0
Transcript of kalupne Masine
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 1/159
Application Tutorial: Mold Machining
3-Axis Rough (HSR), Semi-Finish (HSM) and
Finish (HSS)
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 2/159
2
Files Used
Part File
Forging DIE.SLDASM
Post Processor
Mitu_E
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 3/159
3
Chapter 1
Introduction
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 4/159
4
This tutorial illustrates the use of HSS technology for 3-Axis roughing and finishing of
the mold part displayed on the cover page of this tutorial. HSS technology is used to
finish this entire part as it gave a better finish than HSM on a Multi-axis machine,
when tried on a machine at one of the SolidCAM client.
Important things to keep in mind before using HSS for machining a part:
It works directly on surface data.
The user needs to define the gouge checks manually.
It cannot handle surface overlaps.
The gaps between surfaces and cuts can be handled in the Links section.
It is widely used only for local area finishing.
It can easily control the point spacing. An even and controlled spacing of Toolpath
points exponentially improves the surface finish.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 5/159
5
Chapter 2
CAM-Part Definition
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 6/159
6
1. Double click the SolidWorks Icon.
Browse to open the SolidWorks part FORGING DIE.SLDASM.
2. Click SolidCAM >New > Milling.
3. Accept the default part file name and
path and Click OK.
Inside SolidCAM, the following settings must be done.
- Selecting the Machine / Post Processor
- Defining the Co-ordinate system for Milling
- Stock & Part Definition
- Machine & Material Database Selection for iMachining
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 7/159
7
4. In the CNC-Machine list, click Mitu_E.
Leave the fields of Program Number & Subroutine
number with the default settings.
Click Define button in Coordinate System tab to set
the coordinate system for this part.
A dialog box with the following options appears:
Mac CoordSys number
Position
Coordinate system definition options
5. Click Select Face option in the Define CoordSys
options section to define the main coordinate system.
6. In the Place CoordSys origin to section, select Top
center of model box from the drop down.
7. Select the face as shown in the
image.
8. Click to confirm the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 8/159
8
The CoordSys Data dialog box appears.
9. Click OK in the CoordSys Data pop up.
10. Click to confirm the User Coordinate
System.
11. Click Edit iMachining Database in
iMachining Data section.
12. Click the New icon to create the
Machine.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 9/159
9
13. Enter a name for the machine.
Click Save.
The three values needed by iMachining are now highlighted. Enter the values after
checking the same with the machine tool supplier or going through the manuals of
the machine.
14. Enter the values as shown in the image.
Click the Material DB tab to define a
new material.
Click the New icon.
15. Enter P20 as the material name.
Click Save.
You must set the “Ultimate Tensile Strength” of the material. This value is obtained
either by referring to the test chart of the material or searching in material database
websites such as www.matweb.com.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 10/159
10
16. Enter a value of 1030.
Click Save & Exit.
17. Select the machine and material that you
just defined and select 6 as the default
machining level in the iMachining Data
section.
18. Click icon in the Milling Part Data
dialogue box to begin the toolpath
definitions.
19. Right click Operations > Machine Setup.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 11/159
11
20. Enter a value of 125 in Z column.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 12/159
12
Chapter 3
3-Axis Roughing
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 13/159
13
1. Right click Setup > Add Milling
Operation > HSR.
2. Click Geometry.
Click the New icon under
CoordSys.
3. Select the face as shown in the
image.
4. Click to confirm the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 14/159
14
5. Click Tool > Select.
6. Click icon to add a new tool.
7. Select BULL NOSE MILL as the tool.
8. Enter the tool
parameters as shown
in the image.
Select the Holder check
box.
9. Select the BT 40 ER
32x60 check box.
Click Select.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 15/159
15
10. Click Constraint boundaries.
Click Created manually.
In the list, click
User-defined boundary.
Click the New icon under
Boundary name.
11. Select the two boundaries as
shown in the image.
Click Yes in OK to accept
pop up each time.
12. Click to confirm the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 16/159
16
13. Click Passes.
Enter the parameters as shown
in the image.
Click the Adaptive step down
tab.
14. Select None in the Adapt Step
down by section.
15. Click Link.
Click the Ramping tab.
Enter the parameters as shown
in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 17/159
17
16. Click the Retracts tab.
Click Minimal vertical retract.
Click the Save & Calculate
icon.
Click the Exit icon.
17. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 18/159
18
18. Right click the operation > Add Milling Operation > 3D iMachining.
19. Click Tool > Select.
Click icon to add a new tool.
Select END MILL as the tool.
20. Enter the tool parameters
as shown in the image.
Select the Holder check
box.
Select BT 40 ER 32x60.
Click Select.
21. Click Technology Wizard.
Click Modify cutting conditions tab.
Set Max. Cutting Angle as 35.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 19/159
19
22. Click Technology.
Enter the parameters
as shown in the image.
Click the Save &
Calculate icon.
Click the Exit icon.
23. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 20/159
20
24. Right click > Copy the operation.
25. Right click > Paste the operation.
26. Right click > Edit the operation.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 21/159
21
27. Click Tool > Select.
Click icon to add a new tool.
Select BULL NOSE MILL as the tool.
28. Enter the tool parameters as shown in the image.
Select the Holder check box.
Select BT 40 ER 32x60.
Click Select.
29. Click Technology Wizard.
Click Modify cutting
conditions tab.
Set Max. Cutting Angle as 30.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 22/159
22
30. Click the Save & Calculate icon.
Click the Exit icon.
31. Select the check box before the tool path.
The tool path looks like this:
32. Right click the operation > Add Milling Operation > HSR.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 23/159
23
33. In the Technology list,
click Rest roughing.
34. Click Tool > Select.
Click icon to add a new tool.
Select BALL NOSE MILL as the tool.
35. Enter the tool parameters
as shown in the image.
Select the Holder check box.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 24/159
24
36. Select BT 40 EM 10x65.
Click Select.
37. Click Constraint boundaries.
Click Created manually.
In the list, click User-defined
boundary.
Click the New icon
under Boundary name.
38. Select the boundary as shown inthe image.
Click Yes in OK to accept pop up
each time.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 25/159
25
39. Click to confirm the selection.
40. Click Passes.
Enter the parameters as shown
in the image.
41. Click Link.
Enter the parameters as shown in
the image.
42. Click the Retracts tab.
Click Minimal vertical retract.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 26/159
26
43. Click the Save & Calculate icon.
Click the Exit icon.
Select the check box before the tool path.
The tool path now looks like this:
You have completed 3-Axis roughing of the mold.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 27/159
27
Chapter 4
3-Axis Semi-Finishing
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 28/159
28
1. Right click the operation > Add Milling Operation > HSM.
2. Click Tool > Select.
Select the 8 mm BALL NOSE
MILL that was defined for an
earlier operation.
Click Select.
3. Click Passes.
Enter the parameters as shown
in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 29/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 30/159
30
7. Click the Leads tab.
Enter the parameters as shown
in the image.
8. Click the Save & Calculate icon.
Click the Exit icon.
9. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 31/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 32/159
32
13. Click Link.
Enter the parameters
as shown in the image.
Click the Save &
Calculate icon.
Click the Exit icon.
14. Select the check box before the tool path.
The final semi-finishing tool path looks like this:
You have finished semi-finishing of the mold.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 33/159
33
Chapter 4
3-Axis Finishing
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 34/159
34
1. Right click the operation >
Add Milling Operation > HSS.
2. Select Morph between two
boundary curves in the
Technology section.
Click Geometry.
Click the New icon under
Drive surface.
3. Select the highlighted
faces.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 35/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 36/159
36
8. Select the curve as shown in the image.
9. Click Yes in OK to accept pop up.
Click to confirm the selection.
10. In the Type list, click Full, start and end at exact surface edges.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 37/159
37
11. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
Click Select.
12. Click Levels.
Set the Plane height as 25.
13. Click Tool path parameters.
Enter the parameters as shown
in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 38/159
38
14. Click the Sorting tab.
In the Cutting method. list, click
Spiral.
15. Click Link.
In the lists, click Use Lead-In and
Use Lead-Out.
Click next to Use Lead-In.
16. Unselect the Use default
Lead-In check box.
Enter the parameters as shown
in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 39/159
39
17. Click next to Use Lead-Out.
18. Unselect the Use default Lead-Out
check box.
Enter the parameters as shown
in the image.
Click OK.
19. Click Gouge Check.
Select the Enable/Disable
check box.
Click the New icon under
Check surfaces 1.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 40/159
40
20. Select the faces as shown in the image:
Click to confirm the selection.
21. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 41/159
41
22. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 42/159
42
23. Right click the operation >
Add Milling Operation > HSS.
24. In the Technology list, click
Morph between two boundary
curves.
Click Geometry.
Click the New icon under
Drive surface.
25. Select the highlighted faces.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 43/159
43
26. Click to confirm the selection.
27. Click the New icon under Start edge curve.
28. Select the curve as shown in the image.
Click Yes in OK to accept
pop up.
Click to confirm the
selection.
29. Click the New icon
under End edge curve.
Select the curve as
shown in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 44/159
44
30. Click Yes in OK to accept pop up.
Click to confirm the selection.
31. In the Type list, click Full, start and
end at exact surface edges.
Click Margins.
32. Enter the values as shown in the image.
Click OK.
33. Click Tool > Select.
Select the 8 mm BALL NOSE MILL
that was defined for an earlier
operation.
Click Select.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 45/159
45
34. Click Levels.
Set the Plane height as 23.
35. Click Tool path parameters.
Enter the parameters as
shown in the image.
36. Click the Sorting tab.
In the Cutting method list,
click Spiral.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 46/159
46
37. Click Link.
From the lists, click Use Lead-In and
Use Lead-Out.
Click next to Use Lead-In.
38. Clear the Use default Lead-In check
box.
Enter the parameters as shown in the
image.
Click OK.
39. Click next to Use Lead-Out.
Clear the Use default Lead-Out
check box.
Enter the parameters as shown in the
image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 47/159
47
40. Click the Links tab.
Enter the values as shown in the
image.
41. Click Gouge Check.
Select the Enable/Disable check
box.
Click the New icon under
Check surfaces 1.
42. Select the faces as shown in the
image:
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 48/159
48
43. Click the Save & Calculate icon.
Click the Exit icon.
44. Select the check box before the tool path.
The tool path looks like this:
45. Right click the operation > Add Milling Operation > HSS.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 49/159
49
46. In the Technology list, click Morph between two boundary curves.
Click Geometry.
Click the New icon under Drive surface.
47. Select the highlighted faces.
Click to
confirm the
selection.
48. In the Type list, click Full,
start and end at exact
surface edges.
Click Margins.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 50/159
50
49. Enter the values as shown in the image.
Click OK.
50. Click the New icon under Start edge curve.
51. Select the curve as shown in the image.
Click Yes in OK to accept pop up.
Click to confirm
the selection.
52. Click the New icon under End edge curve.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 51/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 52/159
52
56. Click Tool path parameters.
Enter the parameters as shown in
the image.
Click the Sorting tab.
57. In the Cutting method list, click
Spiral.
58. Click Link.
In the lists, click Use Lead-
In and Use Lead-Out.
Click next to Use
Lead-In.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 53/159
53
59. Clear the Use default Lead-In check box.
Enter the parameters as shown in
the image.
Click OK.
60. Click next to Use Lead-Out.
Clear the Use default Lead-Out
check box.
Enter the parameters as shown in the
image.
Click OK.
61. Click Gouge Check.
Select the Enable/Disable check
box.
In the Check surfaces 1 list, click
faces1.
Click Show.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 54/159
54
The selected faces must look like these:
62. Click the Save & Calculate icon.
Click the Exit icon.
63. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 55/159
55
64. Right click the operation >
Add Milling Operation >
HSS.
65. Click Geometry.
Click the New icon under Drive surface.
66. Select the highlighted
faces.
Click to confirm the
Selection.
67. Click the New icon under Start edge curve.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 56/159
56
68. Select the curve as shown in the image.
69. Click Yes in OK to accept pop up.
Click to confirm the selection.
70. Click the New icon under End edge curve.
71. Select the curve as shown in the image.
Click Yes in OK to
accept pop up.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 57/159
57
72. Click to confirm the selection.
73. In the Type list, Full, start and end
at exact surface edges.
74. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
75. Click Levels.
Set the Plane height as 25.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 58/159
58
76. Click Tool path parameters.
Enter the parameters as shown in
the image.
77. Click the Sorting sub tab.
In the Cutting method list, click
Spiral.
78. Click Link.
In the lists, click Use Lead-In and
Use Lead Out from.
Click next to Use Lead-In.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 59/159
59
79. Clear the Use default Lead-In check box.
Enter the parameters as shown in the
image.
Click OK.
80. Click next to Use Lead-Out.
Clear the Use default Lead-Out
check box.
Enter the parameters as shown in the
image.
Click OK.
81. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check
surfaces 1.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 60/159
60
82. Select the highlighted faces.
Click to confirm.
83. Click the Save & Calculate icon.
Click the Exit icon.
84. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 61/159
61
85. Right click the operation > Add Milling Operation > HSS.
86. In the Technology list, click
Parallel to curves.
Click Geometry.
Click the New icon under
Drive surface.
87. Select the highlighted face.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 62/159
62
88. Click the New icon under Edge curve.
Select the curve as shown in the image.
Click Yes in OK to accept
pop up.
Click to confirm the
selection.
89. In the Type list, click
Determined by number
of cuts.
Enter 10 in the Number
of cuts field.
90. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
Click Select.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 63/159
63
91. Click Levels.
Set the Plane height as 25.
92. Click Tool path parameters.
Enter the parameters as shown
in the image.
93. Click the Sorting tab.
In the Cutting method list, click Spiral.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 64/159
64
94. Click Link.
In the lists, click Use Lead-In and Use Lead Out.
Click next to Use Lead-In.
95. Clear the Use default Lead-In
check box.
Enter the parameters as shown in
the image.
Click OK.
96. Click next to Use Lead-Out.
Clear the Use default
Lead-Out check box.
Enter the parameters as shown
in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 65/159
65
97. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check surfaces 1.
98. Select the faces as shown in the image:
Click to confirm the selection.
99. Click the Save & Calculate icon.
Click the Exit icon.
100. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 66/159
66
101. Right click the operation > Add Milling Operation > HSS.
.
102. In the Technology list, click
Morph between two
boundary curves.
Click Geometry.
Click the New icon
under Drive surface
103. Select the highlighted faces.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 67/159
67
104. Click the New icon under Start edge curve.
Select the highlighted curve.
Click Yes in OK to accept pop up.
Click to confirm the selection.
105. Click the New icon under
End edge curve.
Select the highlighted curve.
Click Yes in Ok to accept pop up.
Click to confirm the selection.
106. In the Type list, click Full, start and
end at exact surface edges.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 68/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 69/159
69
110. Click Tool path parameters.
Enter the parameters as shown
in the image.
Click the Sorting tab.
Select Spiral as the Cutting
method.
Click Link.
Select Use Lead-In and Use- Lead
Out from the drop down lists.
Click next to Use Lead-In.
111. Unselect the Use default Lead-
In check box.
Enter the parameters as shown
in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 70/159
70
112. Click next to Use Lead-Out.
Unselect the Use default Lead-
Out check box.
Enter the parameters as shown
in the image.
Click OK.
113. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check surfaces 1.
114. Select the highlighted faces.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 71/159
71
115. Click the Save & Calculate icon.
Click the Exit icon.
116. Select the check box before the tool path.
The tool path looks like this:
117. Right click the operation > Add Milling Operation > HSM.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 72/159
72
118. In the Technology list, click
Horizontal machining.
119. Click Tool > Select.
Select the 6 mm BALL NOSE MILL that was defined for an earlier operation.
120. Click Constraint boundaries.
Click Created manually .
In the list, click User-defined
boundary.
Set 1 as the Offset value.
Click the New icon under
Boundary name.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 73/159
73
121. Select the highlighted
boundary.
Click Yes in Ok to accept pop
up.
Click to confirm the
selection.
122. Click Passes.
Enter the parameters as shown
in the image.
123. Click Link > Ramping.
Enter the parameters as shown
in the image.
Click the Retracts tab.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 74/159
74
124. Select Minimal vertical
retract .
Click the Save & Calculate
icon.
Click the Exit icon.
125. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 75/159
75
126. Right click the operation > Add Milling Operation > HSS.
127. Click Geometry.
In the Type list, click Full,
start and end at exact
surface edge.
Click Margin.
Set the End Margin as 0.1
Click the New icon
under Drive surface.
128. Select the highlighted
faces.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 76/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 77/159
77
134. Click Levels.
Set the Plane height as 25.
135. Click Tool path parameters.
Enter the parameters as shown in
the image.
Click the Sorting tab.
In the Cutting method list, clickSpiral.
Click Link.
In the lists, click Use Lead-In and
Use Lead-Out.
136. Click next to Use Lead-In.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 78/159
78
137. Clear the Use default Lead-In check
box.
Enter the parameters as shown in
the image.
Click OK.
138. Click next to Use Lead-Out.
Clearthe Use default Lead-
Out check box.
Enter the parameters as shown
in the image.
Click OK.
139. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check surfaces 1.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 79/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 80/159
80
143. Right click the operation > Add Milling Operation > HSM.
144.In the Technology list, click
Horizontal machining.
Click Tool > Select.
Select the 6 mm BALL NOSE
MILL that was defined for an
earlier operation.
145. Click Constraint boundaries.
Click the New icon
under Boundary name.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 81/159
81
146. Select the boundary as
shown in the image.
147. Click Passes.
Enter the parameters as
shown in the image.
148. Click Link.
Enter the parameters as
shown in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 82/159
82
149. Click the Ramping tab.
Enter the values as shown in the
image.
150. Click the Retracts tab.
Click Minimal vertical retract.
151. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 83/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 84/159
84
154. Click Geometry.
In the Type list, click Full,
start and end at exact
surface edges.
Click the New icon
under Drive surface.
155. Select the highlighted faces.
Click to confirm the
selection.
156. Click the New icon under Start edge curve.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 85/159
85
157. Select the highlighted curve.
Click to confirm the
chain.
Click to confirm the
selection.
158. Click the new icon under
End edge curve.
Select the highlighted
curve.
Click to confirm the
selection.
159. Click Tool > Select.
Select the 6 mm BALL NOSE MILL that was defined for an earlier operation.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 86/159
86
160. Click Levels.
Set the Plane height as 25.
161. Click Tool path parameters.
Enter the parameters as shown
in the image.
162. Click the Sorting tab.
In the Cutting method list,
click One-way.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 87/159
87
163. Click Link.
In the lists, click Use Lead-In and Use Lead-Out.
164. Click next to Use Lead-In.
Clear the Use default Lead-
In check box.
Enter the parameters as shown
in the image.
Click OK.
165. Click next to Use Lead-Out.
Clear the Use default Lead-
Out check box.
Enter the parameters as
shown in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 88/159
88
166. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check surfaces 1.
167. Select the highlighted faces.
Click to confirm the
selection.
168. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 89/159
89
169. Select the check box before the tool path.
The tool path looks like this:
170. Right click the operation > Add Milling Operation > HSS.
171. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
Click the New icon under Drive surface.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 90/159
90
172. Select the highlighted faces.
Click to
confirm the
selection.
172. Click the New icon under Start edge curve.
Select the highlighted curve.
Click to
confirm the
chain.
Click to
confirm the
selection.
173. Click the New icon under End edge curve.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 91/159
91
174. Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
175. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
176. Click Levels.
Set the Plane height as 25.
177. Click Tool path parameters.
Enter the parameters as shown in
the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 92/159
92
178. Click the Sorting tab.
In the Cutting method list, click One-way.
179. Click Link.
In the lists, click Use Lead-In and Use Lead-Out.
180. Click next to Use Lead-In.
Clear the Use default Lead-In
check box.
Enter the parameters as shown in the
image.
Click OK.
181. Click next to Use Lead-Out.
Clear the Use default Lead-Out check
box.
Enter the parameters as
shown in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 93/159
93
182. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check surfaces 1.
183. Select the highlighted
faces.
Click to confirm
the selection.
184. Click the Save & Calculate icon.
Click the Exit icon.
185. Select the check box
before the tool path.
The tool path looks like
this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 94/159
94
Now repeat the same process to create the tool path for the opposite side.
186. Right click the operation > Add Milling Operation > HSS.
187. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
Click the New icon under Drive surface.
188. Select the highlighted
faces.
Click to confirm
the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 95/159
95
189. Click the New icon under Start edge curve.
Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
190. Click the New icon under End edge curve.
Select the highlighted curve.
Click to
confirm the chain.
Click to confirm
the selection.
191. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 96/159
96
192. Click Levels.
Set the Plane height as 25.
193. Click Tool path parameters.
Enter the parameters as shown
in the image.
Click Link.
In the lists, click Use Lead-In and
Use Lead- Out.
194. Click next to Use Lead-In.
Clear the Use default Lead-
In check box.
Enter the parameters as shown
in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 97/159
97
195. Click next to Use Lead-Out.
Clear the Use default Lead-Out
check box.
Enter the parameters as shown in
the image.
Click OK.
196. Click Gouge Check.
Select the Enable/Disable check box.
Click the New icon under Check surfaces 1.
Select the highlighted faces.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 98/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 99/159
99
200. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
201. Click the New icon under Drive surface.
Select the highlighted faces.
To select the surface
marked with yellow
arrow, go to the
Feature Manager
Design Tree, and
select Surface-Offset1.
Click to confirm the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 100/159
100
202. Click the New icon under Start edge curve.
Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
203. Click the New icon under End edge curve.
Select the highlighted curve.
Click to
confirm the chain.
Click to
confirm the
selection
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 101/159
101
204. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
205. Click Levels.
Set the Plane height as 25.
206. Click Tool path parameters.
Enter the parameters as shown in the image.
207. Click the Sorting tab.
Select the Flip step over
check box.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 102/159
102
208. Click Link.
In the lists, click Use Lead-In and Use Lead Out.
209. Click next to Use Lead-In.
Clear the Use default Lead-In check
box.
Enter the parameters as shown in
the image.
Click OK.
210. Click next to Use Lead-Out.
Clear the Use default Lead-
Out check box.
Enter the parameters as shown in
the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 103/159
103
211. Click Gouge Check.
Select the Enable/Disable check box.
Clear the Drive surfaces check box.
Click the New icon under Check surfaces 1.
212. Select the highlighted faces.
Click to confirm the selection.
213. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 104/159
104
214. Select the check box before the tool path.
The tool path looks like this:
215. Right click the operation > Add Milling Operation > HSS.
216. In the Technology list, click Parallel to curves.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 105/159
105
217. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
Click the New icon under Drive surface.
218. Select the highlighted
face.
Click to confirm
the selection.
219. Click the New icon under Edge curve.
Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 106/159
106
220. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
221. Click Levels.
Enter the parameters as shown in the image.
222. Click Tool path parameters.
Enter the parameters as shown in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 107/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 108/159
108
225. Click next to Use Lead-Out.
Clear the Use default Lead-
Out check box.
Enter the parameters as shown
in the image.
Click OK.
226. Click the Links tab.
Enter the parameters as shown inthe image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 109/159
109
227. Click Gouge check.
Enter the parameters
as shown in the image.
Click the New icon under
Check surfaces 1.
228. Select the highlighted face.
Click to confirm the
selection.
229. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 110/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 111/159
111
232. Click Geometry.
In the Type list, click Determined by number of cuts.
Click the New icon under Drive surface.
233. Select the highlighted face.
Click to confirm
the selection.
234. Click the New icon under Edge curve.
Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 112/159
112
235. Set Number of cuts as 10.
Click Tool > Select.
Select the 8 mm BALL NOSE MILL
that was defined for an earlier
operation.
Click Levels.
Set the Plane height as 25.
236. Click Tool path parameters.
Enter the parameters as shown in
the image.
237. Click Gouge check.
Unselect the Drive surfaces check box.
Click the New icon under Check surfaces 1.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 113/159
113
238. Select the highlighted face.
Click to confirm the selection.
239. Click the Save & Calculate icon.
Click the Exit icon.
240. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 114/159
114
241. Right click the operation > Add Milling Operation > HSS.
242. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
243. Click the New icon under Drive surface.
Select the highlighted faces.
Click to confirm the
selection.
244. Click the New icon
under Start edge curve.
Select the highlighted
curve.
Click to confirm the
chain.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 115/159
115
245. Click the New icon under End edge curve.
Select the highlighted curve.
Click to confirm the
chain.
Click to confirm the
selection.
246. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
247. Click Levels.
Enter Plane height as 25.
248. Click Tool path parameters.
Enter the parameters as shown in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 116/159
116
249. Click Link.
In the lists, click Use Lead-In and Use Lead-Out.
250. Click next to Use Lead-In.
Unselect the Use default Lead-In check
box.
Enter the parameters as shown in the
image.
Click OK.
251. Click next to Use Lead-Out.
Unselect the Use default Lead-Out check
box.
Enter the parameters as shown in the
image.
Click OK.
252. Click the Links tab.
Set 300 as Small move as size in % of step over.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 117/159
117
253. Click Gouge check.
Unselect the Drive surfaces check box.
Click the New icon under Check surfaces 1.
254. Select the highlighted faces.
Click to confirm the
selection.
255. Click the Save & Calculate icon.
Click the Exit icon.
256. Select the check box before the tool path.
The tool path looks like this:
Now repeat the same
operation for the other
side.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 118/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 119/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 120/159
120
265. Click the Sorting tab.
Select the Flip step over check
box.
Click Link.
In the lists, click Use Lead-In
and Use Lead-Out.
266. Click next to Use Lead-In.
Unselect the Use default Lead-In check
box.
Enter the parameters as shown in the
image.
Click OK.
267. Click next to Use Lead-Out.
Clear the Use default Lead-Out check
box.
Enter the parameters as shown in the
image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 121/159
121
268. Click the Links tab.
Set 300 as Small move as size in % of step over.
Click Gouge check.
Clear the Drive surfaces
check box.
Click the New icon under
Check surfaces 1.
269. Select the highlighted
faces.
Click to confirm the
selection.
270. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 122/159
122
271. Select the check box before the tool path.
The tool path looks like this:
Now repeat the same operation for the opposite side.
272. Right click the operation > Add Milling Operation > HSS.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 123/159
123
273. In the Technology list, click Parallel to Curves.
Click Geometry.
In the Type list, click Determined by number of cuts.
Click the New icon under Drive surface.
274. Select the highlighted face.
Click to confirm the
selection.
275. Click the New icon under Edge curve.
Select the highlighted curve.
Click to confirm the
chain.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 124/159
124
276. Click Margins.
Enter the parameters as shown in the image.
Click OK.
277. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
278. Click Levels.
Enter Plane height as 25.
279. Click Tool path parameters.
Enter the parameters as shown in the image.
280. Click Link.
In the list, click Use Lead-In.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 125/159
125
281. Click next to Use Lead-In.
Clear the Use default Lead-In check box.
Enter the parameters as shown in
the image.
Click OK.
282. Click the Links tab.
Set 300 as Small move as size in
% of step over.
283. Click Gouge check.
Unselect the Drive surfaces check box.
Click the New icon under Check surfaces 1.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 126/159
126
284. Select the highlighted faces.
Click to confirm the
selection.
285. Click the Save & Calculate icon.
Click the Exit icon.
286. Select the check box before the tool path.
The tool path looks like this:
Now repeat the same operation for the opposite side.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 127/159
127
287. Right click the operation > Add Milling Operation > HSS.
288. In the Technology list, click Morph between two boundary curves.
Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
Click the New icon under Drive surface.
289. Select the highlighted faces.
Click to confirm
the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 128/159
128
290. Click the New icon under Start edge curve.
Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
291. Click the New icon under End edge curve.
Select the highlighted curve.
Click to confirm
the chain.
Click to confirm
the selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 129/159
129
292. Click Margins.
Enter the parameters as shown in the
image.
Click OK.
293. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
294. Click Levels.
Enter Plane height as 25.
295. Click Tool path parameters.
Enter the parameters as shown in the image.
296. Click Link.
In the lists, click Use Lead-In and Use Lead-Out.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 130/159
130
297. Click next to Use Lead-In.
Clear the Use default Lead-In check box.
Enter the parameters as shown in the
image.
Click OK.
298. Click next to Use Lead-Out.
Clear the Use default Lead-Out check box.
Enter the parameters as shown in the
image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 131/159
131
299. Click Gouge check.
Clear the Drive surfaces check box.
Click the New icon under Check surfaces 1.
300. Select the highlighted faces.
Click to confirm the
selection.
301. Click the Save & Calculate icon.
Click the Exit icon.
302. Select the check box
before the tool path.
The tool path looks like
this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 132/159
132
303. Right click the operation > Add Milling Operation > HSS.
304. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
Click the New icon under Drive surface.
305. Select the highlighted faces.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 133/159
133
306. Click the New icon under Start edge curve.
Select the highlighted curve.
Click to confirm the chain.
Click to confirm the
selection.
307. Click the New icon under End edge curve.
Select the highlighted curve.
Click to confirm the chain.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 134/159
134
308. Click Margins.
Enter the parameters as shown in the
image.
Click OK.
309. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
310. Click Levels.
Enter Plane height as 23.
311. Click Tool path parameters.
Enter the parameters as shown in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 135/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 136/159
136
315. Click Gouge check.
Clear the Drive surfaces check box.
Click the New icon under Check surfaces 1.
316. Select the highlighted faces.
Click to confirm
the selection.
317. Click the Save & Calculate icon.
Click the Exit icon.
318. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 137/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 138/159
138
323. Select the highlighted curve.
Click to confirm the chain.
Click to confirm the selection.
324. Click the New icon under
End edge curve.
Select the highlighted curve.
Click to confirm the chain.
Click to confirm the selection.
325. Click Margins.
Enter the parameters as shown in the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 139/159
139
326. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
327. Click Levels.
Enter Plane height as 23.
328. Click Tool path parameters.
Enter the parameters as shown in the
image.
Click Link.
In the lists, click Use Lead-In and Use
Lead-Out.
329. Click next to Use Lead-In.
Unselect the Use default Lead-In check box.
Enter the parameters as shown in the
image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 140/159
140
330. Click next to Use Lead-Out.
Unselect the Use default Lead-Out
check box.
Enter the parameters as shown in the
image.
Click OK.
331. Click Gouge check.
Unselect the Drive surfaces check box.
Click the New icon under Check surfaces 1.
332. Select the highlighted faces.
Click to confirm the
selection.
333. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 141/159
141
334. Select the check box before the tool path.
The tool path looks like this:
335. Right click the operation > Add Milling Operation > HSS.
336. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 142/159
142
337. Click the New icon under Drive surface.
Select the highlighted face.
Click to confirm the
selection.
338. Click the New icon under
Start edge curve.
Select the highlighted curve.
Click to confirm the chain.
Click to confirm the
selection.
339. Click the new icon under End
edge curve.
Select the highlighted curve.
Click to confirm the chain.
Click to confirm the
selection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 143/159
143
340. Click Margins.
Enter the parameters as shown in the
image.
Click OK.
341. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
342. Click Levels.
Enter Plane height as 23.
343. Click Tool path parameters.
Enter the parameters as shown in
the image.
Click Link.
In the lists, click Use Lead-In and
Use Lead-Out.
Click next to Use Lead-In.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 144/159
144
344. Clear the Use default Lead-In check box.
Enter the parameters as shown in the
image.
Click OK.
345. Click next to Use Lead-Out.
Unselect the Use default Lead-Out check box.
Enter the parameters as shown in the
image.
Click OK.
346. Click the Links tab.
Enter the parameters as shown in the
image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 145/159
145
347. Click Gouge check.
Clear the Drive surfaces check box.
Click the New icon under Check surfaces 1.
348. Select the highlighted faces.
Click to confirm the
selection.
349. Click the Save & Calculate icon.
Click the Exit icon.
350. Select the check box before the tool path.
The tool path looks like this:
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 146/159
146
351. Right click the operation > Add Milling Operation > HSS.
352. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
353. Click the New icon under Drive surface.
Select the highlighted face.
Click to confirm
the selection.
354. Click the New
icon under Start edge
curve.
Select the highlighted
curve.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 147/159
147
Click to confirm the selection.
355. Click the New icon under End edge curve.
Select the highlighted curve.
Click to
confirm the
chain.
Click to
confirm the
selection.
356. Click Margins.
Enter the parameters as shown in the image.
Click OK.
357. Click Tool > Select.
Select the 8 mm BALL NOSE MILL that was defined for an earlier operation.
Click Levels.
Enter Plane height as 23.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 148/159
148
358. Click Tool path parameters.
Enter the parameters as shown in
the image.
Click Link.
In the lists, click Use Lead-In and
Use Lead-Out.
359. Click next to Use Lead-In.
Clear the Use default Lead-In check box.
Enter the parameters as shown in the
image.
Click OK.
360. Click next to Use Lead-Out.
Clear the Use default Lead-Out
check box.
Enter the parameters as shown in the
image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 149/159
149
361. Click the Links tab.
Enter the parameters as shown in
the image.
Click Gouge check.
Unselect the Drive surfaces check
box.
Click the New icon under
Check surfaces 1.
362. Select the highlighted faces.
Click to confirm the selection.
363. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 150/159
150
364. Select the check box before the tool path.
The tool path looks like this:
Now repeat the same operation for the opposite side.
365. Right click the operation > Add Milling Operation > HSS.
366. Click Geometry.
In the Type list, click Full, start and end at exact surface edges.
Click the New icon under Drive surface.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 151/159
151
367. Select the highlighted faces.
Click to confirm the
selection.
368. Click the New iconunder Start edge curve.
Select the highlighted
curve.
Click to confirm the
chain.
Click to confirm theselection.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 152/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 153/159
153
372. Click Levels.
Enter Plane height as 23.
373. Click Tool path parameters.
Enter the parameters as shown
in the image.
374. Click the Sorting tab.
Select the Flip step over check
box.
375. Click Link.
In the lists, click Use Lead-In and Use Lead-Out.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 154/159
154
376. Click next to Use Lead-In.
Clear the Use default Lead-In check box.
Enter the parameters as shown in
the image.
Click OK.
377. Click next to Use Lead-Out.
Clear the Use default Lead-Out
check box.
Enter the parameters as shown in
the image.
Click OK.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 155/159
155
378. Click the Links tab.
Enter the parameters as shown
in the image.
Click Gouge check.
Clear the Drive surfaces
check box.
Click the New icon under
Check surfaces 1.
379. Select the highlighted faces.
380. Click the Save & Calculate icon.
Click the Exit icon.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 156/159
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 157/159
157
383. Click the New icon under CoordSys.
Select the highlighted curves.
Click Yes in OK to
accept pop-up
windows both
the time.
384. Click Tool > Select.
Click to define a new tool.
Select BULL NOSE MILL as the tool.
Enter the parameters as shown in the image.
Select the Holder check box.
Select BT 40 ER
32x60 as the holder.Click Select.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 158/159
158
385. Click Levels.
Enter the parameters as shown
in the image.
386. Click Technology.
Enter the parameters as
shown in the image.
387. Click the Contour tab.
Enter the parameters as
shown in the image.
8/9/2019 kalupne Masine
http://slidepdf.com/reader/full/kalupne-masine 159/159
388. Enter the parameters as shown in the image.
Click the Save & Calculate
icon.
Click the Exit icon.
389. Select the check box before the tool path.
The final tool path
looks like this: