Jonwax Brouchere.pdf
-
Upload
shyam-yadav -
Category
Documents
-
view
598 -
download
37
Transcript of Jonwax Brouchere.pdf
-
The right choice BASF resins for printing and packaging: Joncryl and Laromer
-
BASF: your strong partner for the printing and
packaging industry
BASF is a leading supplier of solid resins, water-based
polymers and energy-curable resins under the trade names
Joncryl and Laromer.
Our goal at BASF is to design products that help the
industry comply with European legislation while
maintaining a high level of product performance.
Innovative products for tomorrows world
With our Joncryl product line, we offer a broad range of
high-value, high-performance water-based polymers for the
printing inks and overprint varnish market. The Laromer
product line offers high-performance binding agents
resulting in emission-free energy curing of printing inks and
overprint varnishes. The properties and performance of
these product lines contribute to the quality and value of
the printing and packaging industry.
Making things look better
-
02 03
Responsible Care1
Responsible Care1 is an initiative by the global chemical
industry aimed at achieving continuous improvements in
performance in the fi elds of environment, health and safety.
BASF signed the Responsible Care Global Charter in early
2006, committing itself to expanding its worldwide activities
in these fi elds.
Customer focus
As the worlds leading chemical company, BASF opens up
potential for success together with its partners. BASF helps
customers achieve more success by providing consultative
customer guidance with the selection and application of
its Joncryl and Laromer ranges. BASF works intensively
with customers to develop new products and to improve
existing ones. Our industry-recognized team of applications
experts is eager to assist customers in meeting formulation
and related challenges. Much energy goes into marketing
activities and market research of buyers and end users, to
stay on top of changes in demand.
-
Product Appearance Key properties Non-volatile [%]Molecular
weight (Mw)
Styrene/acrylic resins
Solid styrene/acrylic resins
Joncryl ECO is an ultra low VOC and glycol ether-free product range meeting the stringent demands of packaging applications, such as the tobacco and confectionary markets, which cannot tolerate product contamination as a result of retained volatile organic components in the packaging.
Joncryl 586 clear solid resin alkali resistance, excellent water and wet block resistance, good resolubility 97.0 4,500
Joncryl 587 clear solid resin
wide choice of compatible solvents, for maximum formulation exibility, high resistance properties, economic due to low isocyanate demand, provides good pot-life plus capability for fast tack free time
98.0 17,000
Joncryl 611 clear solid resin
high color strength development, excellent ow at high pigment loadings, compatible with many other solvent soluble resin systems, soluble in ethers, ether alcohol mix, ketones and aromatic hydrocarbons
99.0 8,150
Joncryl 678 clear solid resin good color strength development, excellent transfer and printability, good gloss and hold-out 99.0 8,500
Joncryl 680 clear solid resin
high solids varnishes at low viscosity, high gloss, broad compatibility, excellent transfer and printability, good resolubility 99.0 4,500
Joncryl 682 clear solid resin high gloss, high solids/low viscosity solutions, excellent resolubility 99.0 1,750
Joncryl 690 clear solid resin
good viscosity stability, good pigment wetting and color development, good gloss and transparency 99.0 16,500
Joncryl ECO 675 clear solid resin
glycol ether free, ultra low VOC, good color strength development, excellent transfer and printability, good gloss and hold-out 99.5 5,800
Joncryl ECO 694 clear solid resin
glycol ether free, ultra low VOC, good viscosity stability, good pigment wetting and color development, good gloss and transparency 99.5 13,750
Joncryl HPD 671 clear solid resin
good viscosity stability, good pigment wetting and color development, good gloss and transparency 99.5 17,000
-
04 05
Acid value(on solids)
Tg [C]
Ready-made solutions Description and applications
110 66 - styrene-acrylic resin for use in alkali resistant water-based inks and overprint varnishes
< 4 50 - hydroxyl functional acrylic ake for use in solvent-based crosslinked systems
53 60 - acrylic resin for use in solvent-based inks
216 101 Joncryl 61,
8078, 8083 styrene-acrylic resin for use in water-based inks and overprint varnishes
215 91 - acrylic resin for use in water-based overprint varnishes
238 57 Joncryl 8085,
Joncryl 8087 low molecular weight acrylic resin for use in high solids water-based overprint varnishes
240 105 Joncryl 8082,
8088, 8089 styrene-acrylic pigment dispersion resin for use in pigment dispersions for water-based inks
222 95 - glycol ether free styrene-acrylic resin for use in water-based inks and overprint varnishes
200 101 - glycol ether free styrene-acrylic pigment dispersion resin for use in pigment dispersions for water-based inks
214 120 Joncryl HPD
71E, HPD 71MEA styrene-acrylic pigment dispersion resin for use in pigment dispersions for water-based inks
-
Product Appearance Key properties Non-volatile [%]pH
(25 C)
Styrene/acrylic resin solutions
Water-based styrene/acrylic resin solutions
Joncryl DFC is a complete product range of food-contact-compliant (FDA and all European legislations) polymers for use on paper and paperboard and film substrates where Direct Food Contact is necessary.
Joncryl HPD is a special range of High Performance Dispersion resins and resin solutions designed to produce high-quality aqueous pigment dispersions with superior pigment wetting characteristics, exceptional viscosity stability and free-flowing concentrates at high pigment load.
Joncryl 61-E
clear colored solution good pigment wetting, excellent transfer and printability, good gloss and hold-out 35.0 8.3
Joncryl 8078 clear solution
good color strength development, excellent transfer and printability, good gloss and hold-out 32.0 8.3
Joncryl 8082 clear solution
good viscosity stability, good pigment wetting and color development, good gloss and transparency 29.0 8.6
Joncryl 8083 clear solution
good color strength development, excellent transfer and printability, good gloss and hold-out 30.0 8.3
Joncryl 8085
clear colored solution high gloss, excellent resolubility, excellent transfer 42.5 8.1
Joncryl DFC 3025 clear solution
compliant for food contact applications/packaging, excellent transfer and printability, good gloss and hold-out, good water resistance, very low VOC 34.2 8.5
Joncryl HPD 71-E clear solution good viscosity stability, good pigment wetting and color development, good compatibility 25.0 8.5
Joncryl HPD 71 MEA clear solution good viscosity stability, good pigment wetting and color development, good compatibility 25.5 8.4
-
06 07
Viscosity (mPas, 25C)
Molecular weight (Mw)
Acid value(on solids)
Tg [C] Description and applications
3,900 8,500 233 101 ready made ammonia solution of Joncryl 678 for use in water-based inks and overprint varnishes
1,750 8,500 222 101 ready made ammonia solution of Joncryl 678 for use in water-based inks and overprint varnishes
1,350 16,500 249 105 ready made ammonia solution of Joncryl 690 for pigment dispersions to be used in water-based inks
950 8,500 224 101 ready made MEA solution of Joncryl 678 for use in water-based inks and overprint varnishes
1,350 1,750 245 57 ready made ammonia solution of Joncryl 682 for use in high solids water-based overprint varnishes
3,500 5,800 220 95 medium molecular weight styrene-acrylic resin resolution for use in food contact overprint varnishes, inks and pigment concentrates
200 17,000 221 120 ready made ammonia solution of Joncryl HPD 671 for pigment dispersions to be used in water-based inks
1,000 17,000 220 120 ready made MEA solution of Joncryl HPD 671 for pigment dispersions to be used in water-based inks
-
Styrene/acrylic resin solutions
Water-based styrene/acrylic resin solutions
Joncryl LMV 7000 series of Low Maintenance Vehicles offers the printing industry a complete selection of resins and emulsions that will assist in reducing waste and downtime due to anilox plugging and ink buildup on the plates.
Joncryl HPD 96 DMEA clear solution
high concentrated dispersions, pigment savings, excellent rheology and transfer, excellent color development, gloss and transparency, improved shock stability 26.8 8.4
Joncryl HPD 96-E clear solution
high concentrated dispersions, pigment savings, excellent rheology and transfer, excellent color development, gloss and transparency, improved shock stability 31.0 8.5
Joncryl HPD 96-E MEA clear solution
high concentrated dispersions, pigment savings, excellent rheology and transfer, excellent color development, gloss and transparency, improved shock stability 31.5 8.5
Joncryl HPD 296 clear solution
enables high pigmented low viscosity dispersions, improves storage and shock stability, reduces mill time, excellent color development, gloss and transparency 35.5 8.1
Joncryl HPD 296 KOH clear solution
enables high pigmented low viscosity dispersions, improves storage and shock stability, reduces mill time, excellent color development, gloss and transparency 40.0 8.5
Joncryl HPD 296 MEA clear solution
enables high pigmented low viscosity dispersions, improves storage and shock stability, reduces mill time, excellent color development, gloss and transparency 37.5 9.5
Joncryl LMV 7025 clear solution low maintenance, pH-neutral, good gloss and clarity, excellent resolubility 30.0 7.0
Joncryl LMV 7085 clear solution
high concentrated dispersions, excellent color development, low maintenance, pH-neutral 34.5 7.3
Product Appearance Key properties Non-volatile [%]pH
(25 C)
-
08 09
400 16,500 242 105 DMEA based high performance dispersion resin solution for high concentrated pigment dispersions to be used in water-based inks
2,000 16,500 233 105 ammonia based high performance dispersion resin solution for high concentrated pigment dispersions to be used in water-based inks
2,000 16,500 195 105 MEA based high performance dispersion resin solution for high concentrated pigment dispersions to be used in water-based inks
500 11,500 141 15 ammonia based high performance dispersion resin solution for highly pigmented dispersions to be used in water-based inks
300 11,500 141 - KOH based high performance dispersion resin solution for highly pigmented dispersions to be used in water-based inks
700 11,500 141 - MEA based high performance dispersion resin solution for highly pigmented dispersions to be used in water-based inks
2,000 12,500 235 97 low maintenance vehicle, pH-neutral styrene-acrylic resin solution to be used in water-based inks
2,000 13,000 230 77 low maintenance vehicle, pH-neutral styrene-acrylic resin solution for optimized pigment dispersions to be used in water-based inks
Viscosity (mPas, 25C)
Molecular weight (Mw)
Acid value(on solids)
Tg [C] Description and applications
-
Film-forming RC emulsions
Water-based film-forming RC emulsions
Product Appearance Key properties Non-volatile [%]pH
(25 C)Viscosity
(mPas, 25C)
Joncryl 74
semi-translucent emulsion
good water and grease resistance, excellent gloss and transparency, good adhesion 48.0 8.1 600
Joncryl77
semi-translucent emulsion
good resolubility, excellent printability, excellent gloss and transparency, good block resistance 46.0 8.1 550
Joncryl535
translucent emulsion
excellent bleeding resistance (EN646), good printability and resolubility, good washability, low ammonia odor, food contact approval 39.5 8.6 < 50
Joncryl1665
semi-translucent emulsion
excellent heat resistance, good wet rub resistance, excellent adhesion on foil and HDPE, LDPE, OPP lm substrates 36.5 9.3 300
Joncryl1685
semi-translucent emulsion excellent heat resistance, good gloss and clarity 43.5 9.5 350
Joncryl8050
semi-translucent emulsion
excellent grease resistance, excellent lm clarity, excellent resolubility, good adhesion to non-absorbing substrates 42.0 7.9 550
Joncryl8052
semi-translucent emulsion good adhesion, good water resistance, good printability 46.5 7.9 750
Joncryl617
semi-translucent emulsion good lm-forming properties, economical, good gloss and transparency 45.5 8.3 1,250
Joncryl 660 opaque emulsion
excellent hot mar resistance, good rub resistance, good gloss and tranparency 32.3 8.5 400
Joncryl 2136
semi-translucent emulsion
excellent stability in gold inks, long term brightness, excellent rub resistance, excellent printability 42.0 7.9 200
Joncryl 2178
semi-translucent emulsion
excellent dry and wet block resistance, high coef cient of friction, glycol ether free, excellent resolubility, good printability 44.0 8.5 700
Joncryl 2647
semi-translucent emulsion
excellent adhesion on HDPE, LDPE and OPP lm substrates, good lm wetting, fast drying, good wet rub and wet crinckle resistance 46.0 7.9 400
-
10 11
Molecular weight (Mw)
Acid value (on solids)
Tg [C]
Min. film-forming temp. [C] Description and applications
> 200,000 69 - 8 - 3 acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 62 35 12 acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 - 20 < 0 ammonia free acrylic emulsion for use in water-based tissue inks providing excellent bleeding resistance
> 200,000 63 - 42 < 5 acrylic emulsion for use in heat and water resistant water-based inks and overprint varnishes
> 200,000 - - 20 200,000 114 - 18 200,000 65 - 35 < 5 acrylic emulsion for water-based inks on paper, lm and foil substrates
> 200,000 63 7 < 0 styrene-acrylic emulsion for use in water-based overprint varnishes
> 200,000 215 27 26 acrylic emulsion for use in water-based pre-print overprint varnishes
> 200,000 78 - 25 200,000 68 42 < 0 styrene-acrylic emulsion for use in block resistant water-based inks and overprint varnishes
> 200,000 63 - 35 < 5 acrylic emulsion for water-based inks used on lm substrates
-
Film-forming RC emulsions
Water-based film-forming RC emulsions
Joncryl FLX products offer an excellent resistance/resolubility balance and are therefore very suitable to be used in water-based inks for flexible packaging applications. The conversion to water-based inks for medium duty film applications is a high quality, cost-effective reality with the FLX products.
Product Appearance Key properties Non-volatile [%]pH
(25 C)Viscosity
(mPas, 25C)
Joncryl 2651
semi-translucent emulsion
excellent adhesion and leveling on lm substrates, excellent gloss, excellent transfer, good water resistance, good resolubility 44.5 7.7 450
Joncryl 9010
translucent emulsion
water-based, economical, low sealing temperature, good blocking resistance 50.0 7.6 550
Joncryl DFC 3040-E
semi-translucent emulsion
compliant for food contact applications/packaging, good printability, good resolubility, good viscosity stability, good gloss and clarity, very low VOC 44.5 8.3 700
Joncryl DFC 3030
semi-translucent emulsion
compliant for food contact applications/packaging, good printability, good resolubility, excellent adhesion on foil and HDPE, LDPE, OPP lms, high COF, ultra low VOC
47.4 7.9 1,150
Joncryl ECO 2177
semi-translucent emulsion
ultra low VOC, glycol ether free, excellent resolubility, excellent printability, excellent viscosity stability 46.0 8.2 700
Joncryl ECO 2117
semi-translucent emulsion
ultra low VOC, glycol ether free, excellent resolubility, excellent printability, excellent viscosity stability, good compatibility 46.0 8.2 1,250
Joncryl ECO 2124
semi-translucent emulsion
ultra low VOC, glycol ether free, excellent resolubility, excellent printability, excellent viscosity stability, good compatibility 47.0 7.9 1,150
JoncrylFLX 5000
semi-translucent emulsion
good dry and wet rub resistance, excellent resolubility and printability, excellent heat-seal resistance, excellent blocking resistance 42.0 8.5 1,000
JoncrylFLX 5010
semi-translucent emulsion
excellent resistance (alkaline, wet crinkle, deepfreeze), good bond strength in lamination, good resolubility and printability, good heat-seal resistance, fast curing, high gloss
45.5 8.2 40
Joncryl FLX 5020
semi-translucent emulsion
excellent resistance (alkaline, water, deepfreeze), excellent resolubility and printability, good heat-seal resistance, fast curing, high gloss 41.0 8.1 40
JoncrylFLX 5030
semi-translucent emulsion
excellent bond strength in lamination, excellent resolubility and printability, excellent heat-seal bondstrength, fast curing 42.5 8.2 40
JoncrylLMV 7031
translucent emulsion
low maintenance, pH-neutral, excellent resolubility, good water resistance, good adhesion to lm and foil substrates 47.5 7.7 1,500
JoncrylLMV 7040
translucent emulsion low maintenance, pH-neutral, excellent resolubility 45.0 7.0 600
-
12 13
Molecular weight (Mw)
Acid value (on solids)
Tg [C]
Min. film-forming temp. [C] Description and applications
> 200,000 85 - 30 < 0 acrylic emulsion for water-based inks on paper, lm and foil substrates
> 200,000 60 - 10 - acrylic co-polymer emulsion for use in water-based heat-seal lacquers for cardboard blisters and exible packaging
> 200,000 65 22 26 lm-forming styrene-acrylic emulsion for use in food contact water-based inks and overprint varnishes
> 200,000 65 - 27 < 0 soft acrylic emulsion for use in food contact water-based inks and overprint varnishes
> 200,000 64 21 11 glycol ether free acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 62 8 < 5 glycol ether free styrene-acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 65 - 35 < 5 glycol ether free acrylic emulsion for use in water-based inks for lm substrates
> 200,000 90 - < 5 self-crosslinking acrylic emulsion with excellent resolubility for water-based inks used for surface printing on lm substrates
> 200,000 < 10 - 13 self-crosslinking acrylic emulsion with good resolubility for water-based inks used for surface printing on lm substrates as well as reverse printing and subsequent adhesion lamination
> 200,000 26 - 13 self-crosslinking acrylic emulsion with excellent resolubility for water-based inks used for surface printing on lm substrates
> 200,000 26 - 8 self-crosslinking acrylic emulsion with excellent resolubility for water-based white inks used for reverse printing on lm substrates and subsequent adhesion lamination
> 200,000 57 - 9 - 1 low maintenance vehicle, pH-neutral, lm-forming acrylic emulsion for use in water-based inks for lm substrates
> 200,000 115 28 - low maintenance vehicle, pH-neutral, hard lm-forming styrene-acrylic emulsion for use in water-based inks for paper, lm and foil substrates
-
Non-film-forming RC emulsions
Water-based non-film-forming RC emulsions
Product Appearance Key properties Non-volatile [%]pH
(25 C)Viscosity
(mPas, 25C)
Joncryl90
semi-translucent emulsion excellent optical clarity, high gloss, good heat resistance, fast drying 44.0 8.3 260
Joncryl537-E
semi-translucent emulsion
excellent alkali and detergent resistance, broad adhesion characteristics to non-absorbant substrates, excellent gloss, pigment wetting 46.5 8.2 250
Joncryl538
semi-translucent emulsion
plasticizer migration resistance, excellent scrub resistance, good adhesion to non-absorbing substrates 46.5 7.7 250
Joncryl631 opaque emulsion
increases color brightness, good resolubility and printability, fast drying, low curling 49.5 7.8 2,500
Joncryl 1158
semi-translucent emulsion
good resolubility, low odor, good viscosity stability, fast drying, high color brightness 30.0 8.6 200
Joncryl1180 opaque emulsion
improved color brightness, excellent resolubility and printability, fast drying, exceptional low odor, low curling, good viscosity stability 44.0 7.0 600
Joncryl1680-E white emulsion low gloss, no matting agent required 43.5 7.6 300
Joncryl2038
semi-translucent emulsion
excellent solvent and detergent resistance, excellent plasticizer migration resistance, good adhesion to non-absorbing substrates 43.5 8.2 500
Joncryl8060
semi-translucent emulsion
excellent clarity, excellent gloss, good lm-forming properties, excellent formulation exibility 45.0 8.0 250
Joncryl8064
semi-translucent emulsion excellent clarity, excellent gloss, fast drying, good lm-forming properties 43.5 8.0 150
Joncryl8067
semi-translucent emulsion excellent optical clarity, high gloss, good heat resistance, fast drying 42.0 8.1 250
Joncryl8068
semi-translucent emulsion excellent gloss, excellent clarity, cost effective 44 8.1 200
Joncryl 2157 opaque emulsion
extremely fast drying, exhibits low curling, excellent resolubility, excellent compatibility, ultra low VOC 48.0 8.3 125
Joncryl8055
semi-translucent emulsion
exceptional low odor, excellent resolubility, good heat resistance, high gloss, fast drying 46.0 7.9 400
Joncryl DFC 3050-E
semi-translucent emulsion
compliant for food contact applications/packaging, good printability, good resolubility, good block resistance, good gloss and clarity, ultra low VOC 45.0 8.2 300
Joncryl ECO 2189
semi-translucent emulsion
glycol ether free, ultra low VOC, fast drying, high gloss, excellent versatility and robustness 48.0 8.2 550
Joncryl LMV 7051
semi-translucent emulsion low maintenance, pH-neutral, high gloss, excellent resolubility 44.5 7.5 400
-
14 15
Molecular weight (Mw)
Acid value(on solids)
Tg [C]
Min. film-forming temp. [C] Description and applications
> 200,000 76 110 > 85 styrene-acrylic emulsion for use in water-based overprint varnishes and inks
> 200,000 52 50 43 acrylic emulsion for use in alkali or detergent resistant water-based inks and overprint varnishes
> 200,000 70 64 60 acrylic emulsion for use in water-based inks for vinyl wallpaper and ooring
> 200,000 31 107 > 85 high hiding styrene-acrylic emulsion for use in water-based inks
- - 103 - low odor acrylic emulsion for use in water-based exo inks for news print
> 200,000 - 107 > 85 high hiding low odor styrene-acrylic emulsion for use in water-based exo inks
> 200,000 28 56 49 styrene-acrylic emulsion for use in low gloss/matt overprint varnishes
> 200,000 76 > 85 > 85 acrylic emulsion for use in detergent resistant water-based wallpaper inks for vinyl and paper substrates
> 200,000 150 110 84 styrene-acrylic emulsion for use in high gloss high quality overprint varnishes
> 200,000 158 97 58 styrene-acrylic emulsion for use in high gloss high quality overprint varnishes
> 200,000 78 110 > 90 styrene-acrylic emulsion for use in water-based overprint varnishes
> 200,000 152 - 81 styrene-acrylic emulsion for use in high gloss high quality overprint varnishes
> 200,000 36 105 > 85 high solids extremely fast drying styrene-acrylic emulsion for water-based inks on paper and paperboard
> 200,000 - 110 > 85 low odor acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 65 99 > 85 hard non- lm-forming styrene-acrylic emulsion for use in food contact water-based inks and overprint varnishes
> 200,000 65 98 > 85 glycol ether free styrene-acrylic emulsion for use in water-based inks and overprint varnishes
> 200,000 115 98 56 low maintenance vehicle, pH-neutral, hard, non- lm-forming styrene-acrylic emulsion for use in water-based inks for paper and paperboard
-
Joncryl 142-E opaque emulsion
excellent transfer and printability, excellent ink viscosity stability, broad compatibility, good rub resistance, at dilution pro le 40.0 6.1 25
Joncryl637
white opaque emulsion
good transfer and printability, excellent ink viscosity stability, broad compatibility, at dilution pro le, low cost in use 40.0 6.1 70
Joncryl 638
white opaque emulsion cost effective, good transfer and viscosity stability 38.0 6.1 70
Joncryl 661
semi-translucent emulsion
good transfer and printability, excellent hot mar resistance, low cost in use 44.0 2.1 60
Joncryl 665 white emulsion
excellent transfer and printability, good hot mar resistance, low cost in use, high ef ciency, excellent ink viscosity stability 44.5 2.0 25
Joncryl667 white emulsion
excellent transfer and printability, good hot mar resistance, excellent ink viscosity stability 44.0 2.5 25
Joncryl 8003
semi-translucent emulsion
excellent hot mar resistance, excellent transfer and printability, at dilution pro le, excellent ink viscosity stability 33.5 1.7 240
Joncryl 8004 clear solution
excellent transfer and printability, excellent carbon black dispersion vehicle, excellent ink viscosity stability 30.0 7.6 140
Acryliccolloids
Water-based acrylic colloids
Product Appearance Key properties Non-volatile [%]pH
(25 C)Viscosity
(mPas, 25C)
-
16 17
40,000 126 28 acrylic colloidal emulsion for use in inks for post-print corrugated board and kraft paper applications
65,000 130 10 acrylic colloidal emulsion for use in inks for post-print corrugated board and kraft paper applications
65,000 125 10 acrylic colloidal emulsion for use in inks for post-print corrugated board and kraft paper applications
85,000 154 70 acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications
57,000 164 123 acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications
16,000 160 90 acrylic colloidal emulsion for use in high-quality inks for pre-print and post-print corrugated board and paper applications
40,000 250 87 acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications
60,000 103 21 ready made acrylic colloidal solution for use in post-print corrugated inks and kraft paper applications
Molecular weight (Mw)
Acid value(on solids)
Tg [C] Description and applications
-
Additives
Water-based additives
Joncryl Wax 4 opaque emulsion
provides highest rub resistance, lowest formulated cost, ultra low VOCs, no foam 40.0 9.0 1,000
Joncryl Wax 14 opaque emulsion
provides highest rub resistance, lowest formulated cost, ultra low VOCs, high slip 40.0 8.0 1,000
Joncryl Wax 22 opaque emulsion
matting agent, decreased coef cient of friction, enhanced rub- and scratch resistance, improved water resistance, improved heat-seal resistance and release properties
35.0 8.4 2,000
Joncryl Wax 35 clear solution
maintains gloss, decreases the coef cient of friction, enhanced rub- and scratch resistance, high melting point 34.5 9.8 25
Joncryl Wax 43 clear solution
maintains gloss, increased coef cient of friction, enhanced rub- and scratch resistance 40.0 9.5 80
Joncryl Wax 120
straw colored emulsion
minimal effect on gloss, decreased coef cient of friction, improved scratch and rub resistance, improved water resistance, improved heat-seal resistance and release properties
34.0 8.8 400
Zinc Oxide Solution #1 clear solution
carboxyl group crosslinking agent, improved heat resistance, improved lm hardness 25.0 11.4 5
Product Appearance Key properties Non-volatile [%]pH
(25 C)Viscosity
(mPas, 25C)
-
18 19
4 132 high ef ciency polyethylene wax dispersion
9 110 high ef ciency polyethylene wax dispersion
2 90 soft micro crystalline wax dispersion
< 1 130 hard ne particle size polyethylene wax emulsion
< 1 159 unique ne particle size polypropylene wax emulsion
< 1 75 polyethylene-paraf n wax emulsion
- - crosslinking agent, effective with all acrylic polymers, having carboxyl functionality
Average particle size (microns)
Melting point of wax [C] Description and applications
-
Energy-curable products
Product Viscosity[Pas, 23 C] Functionality Reactivity Hardness ElasticityChemicalresistance
Laromer LR 9013 45 - 70 3.0
Laromer LR 9004 30 - 50 2.6
Laromer PE 56 F 20 - 40 3.1
Laromer PE 44 F 2 - 5 3.0
Laromer PO 77 F 1 - 3 3.2
Laromer PO 94 F 0.4 - 0.8 3.5
Laromer LR 8869 0.08 - 0.11 3.0
Laromer LR 8996 0.05 - 0.09 3.1
Laromer LR 9007 0.8 - 1.5 4.0
Laromer PO 43 F 0.2 - 0.4 2.9
Laromer PO 33 F 0.07 - 0.13 3.0
Laromer LR 8863 0.05 - 0.1 3.0
Laromer LR 8765 0.6 - 1.2 2.0
Laromer LR 9019 15 - 20 2.4
Laromer LR 9023 2 - 5 2.4
Laromer LR 8986 3 - 6 2.4
Laromer UA 19 T 16 - 30 2.0
Laromer UA 9033 15 - 25 1.7
Laromer LR 8987 2 - 6 2.8
Laromer PA 9039 0.3 - 0.6 - - - - -
Laromer TPGDA 11* 2.0
Laromer DPGDA 8* 2.0
Laromer HDDA 6* 2.0
Laromer TMPTA 130* 3.0
Laromer POEA 8* 1.0
Laromer TBCH 9* 1.0
Laromer LR 8887 40* 1.0
Polyester acrylates
Pigment grinding resins
Polyether acrylates(free of monomer, amine-modified)
Oligoether acrylates
Epoxy acrylates (aliphatic)
Epoxy acrylates (aromatic)
Urethane acrylates (aliphatic, with monomer)
Specialties
Reactive diluents
* mPas, 23 C
-
20 21
Surfacetension Characteristics
EuropeEINECS
USATSCA
CanadaDSL
JapanENCS
China IECSC
KoreaECL
36.2 excellent pigment wetting properties, low in shrinkage -
40.8 tough with good adhesion - - -
43.6 well balanced properties, leads to a tough film
39.8 free of diluents, low viscosity, low odor, flexible - -
39.8 reactive all-round resins - - -
39.2 highly reactive, good pigment wetting, low odor -
36.4 highly reactive, very low in color - - -
35.0 reactive, very low in color and viscosity - - -
39.2 lowest extractable compounds, good scratch resistance - -
38.8 resistant to chemicals, all-round resin
34.8 low yellowing, low-odor diluent SNUR - -
38.4 lower in viscosity than Laromer PO 33 F
43.5 partially water-soluble, flexible, highly reactive
40.7 low viscosity, free of diluents, resistant to chemicals - - -
38.6 diluted version of Laromer LR 9019, contains 15 % DPGDA - - -
42.0 highly reactive, resistant to chemicals
34.7 flexible, low yellowing, flexible at temperature below 0 C -
40.1 highly elastic, reactive, good adhesion - -
36.9 scratch- and weather-resistant, use for outdoor applications - - - -
33.5 leads to good adhesion to different substrates -
33.2 good cutting power reactivity
32.8 excellent cutting power
35.1 excellent cutting power and adhesion
36.2 cure speed and chemical resistance
41.0 good flexibility and adhesion
39.2 good flexibility and adhesion - -
35.8 good flexibility and adhesion, low odor - -
SNUR = Significant new use rule
-
Product Offset inks Liquid inks Screen inks
Laromer LR 9013
Laromer LR 9004
Laromer PE 56 F
Laromer PE 44 F
Laromer PO 77 F
Laromer PO 94 F
Laromer LR 8869
Laromer LR 8996
Laromer LR 9007
Laromer PO 43 F
Laromer PO 33 F
Laromer LR 8863
Laromer LR 8765 -
Laromer LR 9019
Laromer LR 9023
Laromer LR 8986
Laromer UA 19 T
Laromer UA 9033
Laromer LR 8987
Laromer PA 9039 improves adhesion to plastics and metal
Laromer TPGDA
Laromer DPGDA
Laromer HDDA
Laromer TMPTA
Laromer POEA -
Laromer TBCH -
Laromer LR 8887 -
Energy-curable products
Pigment grinding resins
Polyester acrylates
Polyether acrylates(free of monomer, amine-modified)
Oligoether acrylates
Epoxy acrylates (aliphatic)
Epoxy acrylates (aromatic)
Urethane acrylates (aliphatic, with monomer)
Specialties
Reactive diluents
-
22 23
Overprint varnish
excellent very good good - not suitable
-
ED
C 0
410
eBASF SE 67056 Ludwigshafen Germany
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. The agreed contractual quality of the product results exclusively from the statements made in the product specification. It is the responsibility of the recipient of our product to ensure that any proprietary rights and existing laws and legislation are observed. When handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace hygiene measures adequate for handling chemicals must be observed.
= registered trademark of the BASF Group1 = Responsible Care is a service mark of the American Chemistry Council
www.basf.com/resins
Contact worldwide
AsiaBASF East Asia Regional Headquarters Ltd. 45/F, Jardine House No. 1 Connaught Place Central Hong Kong Tel.: +852 2731-4311 Fax: +852 2734-9670
EuropeBASF Nederland B.V. Resins & AdditivesInnovatielaan 18466 SN NijehaskeP.O. Box 3908440 AJ HeerenveenThe NetherlandsTel.: +31 513 619-570Fax: +31 513 [email protected]
Eastern Europe, Africa, West Asia BASF SE Business ManagementDispersions & PigmentsEUM/SD Europe House 67056 Ludwigshafen Germany Tel.: +49 621 60-76246 Fax: +49 621 60-76115
North America BASF Corporation1609 Biddle AvenueWyandotte, MI 48192USATel.: +1 800 231-7868Fax: +1 800 [email protected]
South AmericaBASF S.A.Av. Faria Lima 3600 10 andarItaim Bibi So Paulo SP04538-132BrazilTel.: +55 11 3043-3637Fax: +55 11 [email protected]