Iso Update June2012

International Standards in processAn International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 May to 31 May 2012

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 1 Screw threads

ISO/CD 965-1 ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data

TC 6 Paper, board and pulps

ISO/CD 14453 Pulps — Determination of acetone-soluble matter

TC 10 Technical product documentation

ISO/CD 17599 Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products

TC 17 Steel

ISO/CD 683-18 Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright products of unalloyed and low alloy steels

TC 20 Aircraft and space vehicles

ISO/CD 27027 Aerospace — Solid-state remote power controllers — General performance requirements

ISO/CD 7257 Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test

TC 22 Road vehicles

ISO/CD 19072-1

Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition

ISO/CD 19072-2

Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements

TC 23 Tractors and machinery for agriculture and forestry

ISO/DTR Tractors and machinery for agriculture and forestry — Basic types — Part 2: Codification for road-use

12934-2

ISO/CD 11783-7

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer

ISO/CD 11783-12

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services

TC 28 Petroleum products and lubricants

ISO/CD 17196 Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method

ISO/CD 17197 Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method

ISO/CD 17198 Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method

ISO/CD 17786 Dimethyl ether (DME) for fuels — Determination of evaporation residues — Mass analysis method

TC 33 Refractories

ISO/CD 16835 Refractory products — Determination of thermal expansion

TC 38 Textiles

ISO/CD 16533 Textiles — Measurement of exothermic and endothermic properties of textiles under humidity change

ISO/CD 17299-1

Textiles — Determination of deodorant property — Part 1: General principle

ISO/CD 17299-2

Textiles — Determination of deodorant property — Part 2: Detector tube method

ISO/CD 17299-3

Textiles — Determination of deodorant property — Part 3: Gas chromatography method

ISO/CD 17617 Textiles — Determination of simulated sweat drying rate

TC 41 Pulleys and belts (including veebelts)

ISO/CD 10247 Conveyor belts — Characteristics of covers — Classification

TC 43 Acoustics

ISO/CD 9295 Acoustics — Measurement of high-frequency noise emitted by computer and business equipment

TC 61 Plastics

ISO/CD 17221 Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)

ISO/CD 22007-6

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO/CD 16440 Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines

TC 96 Cranes

ISO/CD 16715 Cranes — Hand signals used with cranes

ISO/CD 16716 Cranes — Monitoring for crane design life

TC 98 Bases for design of structures

ISO/CD 4355 Bases for design of structures — Determination of snow loads on roofs

TC 106 Dentistry

ISO/CD 22674 Dentistry — Metallic materials for fixed and removable restorations and appliances

ISO/CD 9680 Dentistry — Operating lights

ISO/CD 16954 Dentistry — Test methods for evaluating microbiological treatment methods for dental unit procedural water

TC 113 Hydrometry

ISO/CD 4375 Hydrometric determinations — Cableway systems for stream gauging

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/CD 11148-13

Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools

TC 123 Plain bearings

ISO/CD 17606 Plain bearings — Lubrication characteristics of cross-heads pin bearings for low speed marine diesel engines

TC 130 Graphic technology

ISO/CD 12643-1

Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements

ISO/CD 12647-5

Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing

TC 131 Fluid power systems

ISO/CD 10767-1

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps

ISO/CD 10771-1

Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/CD 15494 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE) and polypropylene (PP) — Specifications for components and the system — Metric series

TC 142 Cleaning equipment for air and other gases

ISO/CD 15957 Challenge contaminants for testing air cleaning equipment

TC 146 Air quality

ISO/CD 8672 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method

TC 154 Processes, data elements and documents in commerce, industry and administration

ISO/CD 9735-10

Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 10: Syntax service directories

TC 159 Ergonomics

ISO/CD 9241-940

Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions

TC 163 Thermal performance and energy use in the built environment

ISO/CD 6781-3 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3: Qualifications of Equipment Operators, Data Analysts and Report Writers

TC 165 Timber structures

ISO/CD 17754 Torsional Resistance of Driving in Screws

TC 172 Optics and photonics

ISO/CD 10110-5

Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances

ISO/CD 10110-19

Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: Optical freeform surfaces

ISO/CD 14999-4

Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110

ISO/CD 17328 Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials

ISO/CD 11979-6

Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability

TC 184 Automation systems and integration

ISO/CD 22400-1

Automation systems and integration — Key performance indicators for manufacturing operations management — Part 1: Overview, concepts and terminology

TC 188 Small craft

ISO/CD 6185-3 Inflatable boats — Part 3: Boats with a maximum motor power rating of 15 kW and greater

TC 201 Surface chemical analysis

ISO 18115-1:2010/CD Amd 1

Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy — Amendment 1

ISO 18115-2:2010/CD Amd 1

Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy — Amendment 1

TC 204 Intelligent transport systems

ISO/DTR 17465 Intelligent transport systems - Definition of terms for "Cooperative ITS" and guidelines for standards

ISO/CD 17931 Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS

ISO/DTS 17931 Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS

TC 210 Quality management and corresponding general aspects for medical devices

ISO/IEC DTR 24971

Guidance on the application of ISO 14971

TC 218 Timber

ISO/CD 17959 General requirements for solid wood flooring

JTC 1 Information technology

ISO/IEC CD 29182-3

Reference architecture for sensor network applications and services — Part 3: Reference architecture views

ISO/IEC CD 29182-4

Reference architecture for sensor network applications and services — Part 4: Entity models

ISO/IEC 15414:2006/PDAM 1

Information technology — Open distributed processing — Reference model — Enterprise language — Amendment 1: ODP — The expression of Obligations and Policies

ISO/IEC CD 11770-3

Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques

ISO/IEC 13818- Information technology — Generic coding of moving pictures and associated audio information: Systems —

1/PDAM 3 Part 1: — Amendment 3: Transport of HEVC video over MPEG-2 systems

ISO/IEC 14496-1:2010/PDAM 2

Information technology — Coding of audio-visual objects — Part 1: Systems — Amendment 2: Support for raw audio-visual data

ISO/IEC 14496-10:2012/PDAM 2

Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2

ISO/IEC 14496-15:2010/PDAM 2

Information technology — Coding of audio-visual objects — Part 15: Advanced Video Coding (AVC) file format — Amendment 2: Carriage of high-efficiency video coding (HEVC)

ISO/IEC CD 14496-29

Web video coding — Part 29:

ISO/IEC 23000-12:2010/PDAM 3

Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music application format — Amendment 3

ISO/IEC CD 23001-8

Information technology — MPEG systems technologies — Part 8: Coding-independent code-points

ISO/IEC 23003-3:2012/PDAM 1

Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 1: Conformance

ISO/IEC 23003-3:2012/PDAM 2

Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 2: Reference software

ISO/IEC 23007-3:2011/PDAM 1

Information technology — Rich media user interfaces — Part 3: Conformance and reference software — Amendment 1: Conformance and reference software for widget extension and AUI

ISO/IEC CD 23009-2

Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 2: Conformance and reference software

ISO/IEC CD 23009-4

Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 4: Segment Encryption and Authentication

ISO/IEC CD 15961-4

Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4: Application interface commands for battery assist and sensor functionality

ISO/IEC CD 30119

Quality Standard for the Creation and Delivery of Fair, Valid and Reliable e-Tests

DIS circulated


These documents have obtained substantial support within the appropriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

TC 8 Ships and marine technology

ISO/DIS 16446 Ships and marine technology — Marine environment protection — Adapter for joining dissimilar boom connectors

2012-10-26

(Revision of ISO 16446:2002)

TC 17 Steel

ISO/DIS 3573 * Hot-rolled carbon steel sheet of commercial and drawing qualities 2012-09-25(Revision of ISO 3573:2008)

ISO/DIS 3574 * Cold-reduced carbon steel sheet of commercial and drawing qualities 2012-09-25(Revision of ISO 3574:2008)

TC 20 Aircraft and space vehicles

ISO/DIS 6517 * Air cargo — Certified lower deck containers — Design and testing 2012-10-23(Revision of ISO 6517:1992)

ISO/DIS 14186 * Air cargo — Fire containment covers — Design, performance and testing requirements 2012-10-26

ISO/DIS 16049-2

* Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing conditions

2012-10-29

(Revision of ISO 16049-2:2005)

TC 21 Equipment for fire protection and fire fighting

ISO/DIS 6182-10

* Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers

2012-10-16


TC 22 Road vehicles

ISO/DIS 11451-4

* Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)

2012-10-09


ISO/IEC DIS 15118-2

Road vehicles — Vehicle to grid communication interface — Part 2: Network and application protocol requirements

2012-10-19

ISO/DIS 13052 * Road vehicles — Trailers up to 3,5t — Requirements for jockey wheels and drawbar supports

2012-10-26

ISO/DIS 21308-5

* Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) — Part 5: Coding of loader crane bodywork

2012-10-23

TC 23 Tractors and machinery for agriculture and forestry

ISO/DIS 3776-2 * Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements

2012-10-30


TC 24 Particle characterization including sieving

ISO/DIS 12154 * Determination of density by volumetric displacement — Skeleton density by gas pycnometry

2012-10-05

ISO/DIS 20998-2

* Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory

2012-10-05


ISO/DIS 5163 * Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method

2012-10-11

(Revision of ISO 5163:2005, ISO 5163:2005/Cor 1:2008)

ISO/DIS 5164 * Petroleum products — Determination of knock characteristics of motor fuels — Research method

2012-10-11


TC 30 Measurement of fluid flow in closed conduits

ISO/DIS 4064-3 * Water meters intended for the metering of cold potable water and hot water — Part 3: Test report format

2012-10-04


ISO/DIS 4064-4 * Water meters intended for the metering of cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1

2012-10-04


ISO/DIS 4064-5 * Water meters intended for the metering of cold potable water and hot water — Part 5: Installation requirements

2012-10-04


TC 31 Tyres, rims and valves

ISO 10231:2003/DAmd 1

* Motorcycle tyres — Test methods for verifying tyre capabilities — Amendment 1 2012-10-24

TC 33 Refractories

ISO/DIS 5017 * Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity

2012-10-03


TC 38 Textiles

ISO/DIS 16373-2

* Textiles — Dyestuffs — Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic substances

2012-10-04

ISO/DIS 20743 * Textiles — Determination of antibacterial activity of textile products 2012-10-25(Revision of ISO 20743:2007)

TC 39 Machine tools

ISO/DIS 14955-1

* Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools

2012-10-01

TC 42 Photography

ISO/DIS 15739 * Photography — Electronic still-picture imaging — Noise measurements 2012-10-10(Revision of ISO 15739:2003)

TC 43 Acoustics

ISO/DIS 11200 * Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

2012-10-25


ISO/DIS 12999-1

Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation

2012-10-18

(Revision of ISO 140-2:1991, ISO 140-2:1991/Cor 1:1993)

ISO/DIS 16251-1

* Acoustics — Laboratory measurement of the reduction of transmittedimpact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor

2012-10-04

TC 44 Welding and allied processes

ISO/DIS 5826 * Resistance welding equipment — Transformers — General specifications applicable to all transformers

2012-11-01


ISO * Gas welding equipment — Materials for equipment used in gas welding, cutting and allied 2012-10-25

9539:2010/DAmd 1

processes — Amendment 1

ISO/DIS 5817 * Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections

2012-10-11


TC 45 Rubber and rubber products

ISO/DIS 16565 * Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers

2012-10-10


TC 58 Gas cylinders

ISO/DIS 10462 * Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance 2012-10-11(Revision of ISO 10462:2005)

TC 63 Glass containers

ISO/DIS 12818 * Glass packaging — Standard tolerances for flaconnage 2012-10-23

ISO/DIS 12821 * Glass packaging — 26 H 180 crown finish — Dimensions 2012-10-23

ISO/DIS 12822 * Glass packaging — 26 H 126 crown finish — Dimensions 2012-10-23


ISO/DIS 19900 * Petroleum and natural gas industries — General requirements for offshore structures 2012-10-04(Revision of ISO 19900:2002)

TC 70 Internal combustion engines

ISO/DIS 15619 * Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio

2012-10-17

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/DIS 12749-2

* Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection

2012-10-21

ISO/DIS 3925 * Unsealed radioactive substances — Identification and documentation 2012-10-28(Revision of ISO 3925:1978)

TC 96 Cranes

ISO/DIS 17440 * Cranes — General Design — Limit states and proof of competence of forged steel hooks 2012-10-21

TC 106 Dentistry

ISO/DIS 17304 * Dentistry — Polymerisation shrinkage: Method for determination of polymerisation shrinkage of polymer-based restorative materials

2012-10-29

TC 121 Anaesthetic and respiratory equipment

ISO/DIS 11197 * Medical supply units 2012-11-01(Revision of ISO 11197:2004)

TC 122 Packaging

ISO/DIS 16495.2

* Packaging — Transport packaging for dangerous goods — Test methods 2012-07-04


ISO/DIS 11297- * Plastics piping systems for renovation of underground drainage and sewerage networks 2012-10-18

1 under pressure — Part 1: General

ISO/DIS 11297-3

* Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes

2012-10-18


ISO/DIS 10121-1

* Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media

2012-10-04


ISO/DIS 17369 * Statistical data and metadata exchange (SDMX) 2012-10-05(Revision of ISO/TS 17369:2005)

TC 157 Non-systemic contraceptives and STI barrier prophylactics

ISO/DIS 4074 Natural rubber latex male condoms — Requirements and test methods 2012-10-18

(Revision of ISO 4074:2002, ISO 4074:2002/Cor 1:2003, ISO 4074:2002/Cor 2:2008)

TC 176 Quality management and quality assurance

ISO/DIS 10008 Quality Management - Customer satisfaction - Guidelines for business-to-consumer electronic commerce transactions

2012-10-19

TC 178 Lifts, escalators and moving walks

ISO/DIS 22559-1

* Safety requirements for lifts (elevators) — Part 1: Global essential safety requirements (GESRs)

2012-10-16

(Revision of ISO/TS 22559-1:2004)

TC 190 Soil quality

ISO/DIS 13876 * Soil quality — Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)

2012-10-21

ISO/DIS 13913 * Soil quality — Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC/MS)

2012-10-24

ISO/DIS 16729 * Soil quality — Digestion of nitric acid soluble fractions of elements 2012-10-17

TC 197 Hydrogen technologies

ISO/DIS 14687-3

Hydrogen fuel — Product specification — Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances

2012-11-01

TC 198 Sterilization of health care products

ISO 11137-1:2006/DAmd 1

* Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices — Amendment 1

2012-10-04

ISO 15883-1:2006/DAmd 1

* Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1

2012-10-04


ISO/DIS 16531 * Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS

2012-10-15

TC 202 Microbeam analysis

ISO/DIS 15932 * Microbeam analysis — Analytical electron microscopy — Vocabulary 2012-10-23


ISO/DIS 15638-7

* Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 7: Other applications

2012-10-16

TC 205 Building environment design

ISO/DIS 13612-1

* Heating and cooling systems in buildings — Method for calculation of the system performance and system design for heat pump systems — Part 1: Design and dimensioning

2012-10-08

ISO/DIS 13612-2

* Heating and cooling systems in buildings — Method for calculation of the system performance and system design for heat pump systems — Part 2: Energy calculation

2012-10-08

TC 206 Fine ceramics

ISO/DIS 14544 * Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties

2012-10-23

ISO/DIS 14574 * Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties

2012-10-23

TC 213 Dimensional and geometrical product specifications and verification

ISO/DIS 10360-8.2

* Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 8: CMMs with optical distance sensors

2012-07-25

TC 244 Industrial furnaces and associated processing equipment

ISO/DIS 13574 * Industrial furnaces and associated processing equipment — Vocabulary 2012-10-03

TMB Technical Management Board

ISO/DIS 80079-36

Explosive atmospheres — Part 36: Non-electrical equipment for use in explosive atmospheres — Basic methods and requirements

2012-11-03

ISO/DIS 80079-37

Explosive atmospheres — Part 37: Non-electrical equipment for use in explosive atmospheres — Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'

2012-11-03

ISO/IEC DIS 80079-38

Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines

2012-11-03


ISO/IEC DIS 20005

Information technology — Sensor networks — Services and interfaces supporting collaborative information processing in intelligent sensor networks

2012-10-16

ISO/IEC DIS 29182-1

Information technology — Sensor networks: Sensor network reference architecture (SNRA) — Part 1: General overview and requirements

2012-10-16

ISO/IEC DIS 29182-2

Information technology — Sensor networks: Sensor network reference architecture (SNRA) — Part 2: Vocabulary and terminology

2012-10-25

ISO/IEC DIS 18026

Information technology — Spatial Reference Model (SRM) 2012-10-12

(Revision of ISO/IEC 18026:2009)

ISO/IEC DIS 27000

Information technology — Security techniques — Information security management systems — Overview and vocabulary

2012-10-26

(Revision of ISO/IEC 27000:2009)

ISO/IEC DIS 29191

Information technology — Security techniques — Requirements for partially anonymous, partially unlinkable authentication.

2012-10-23

ISO/IEC 13818-2/DAmd 1

Information technology — Generic coding of moving pictures and associated audio information: Video — Part 2: Amendment 1: Frame packing arrangement signalling for quincunx pattern — Amendment 1: Extension to MPEG2-Video frame packing arrangement type to signal use of side by side with quincunx

2012-10-15

ISO/IEC 14496-10:2012/DAmd 1

Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Additional profiles and supplemental enhancement information (SEI) messages

2012-10-12

ISO/IEC 21000-3:2003/DAmd 2

Information technology — Multimedia framework (MPEG-21) — Part 3: Digital Item Identification — Amendment 2: Digital item semantic relationships

2012-10-12

ISO/IEC 23001-4:2011/DAmd 1

Information technology — MPEG systems technologies — Part 4: Codec configuration representation — Amendment 1: RVC-CAL extensions

2012-10-12

ISO/IEC DIS 24769-2

Information technology — Real-time locating system (RTLS) device conformance test methods — Part 2: Test methods for air interface communication at 2,4 GHz

2012-10-16

ISO/IEC 2382-36:2008/DAmd 1

Information technology — Vocabulary — Part 36: Learning, education and training — Amendment 1

2012-10-12

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

TC 2 Fasteners

ISO/FDIS 4161 * Hexagon nuts with flange, style 2 — Coarse thread 2012-07-19(Revision of ISO 4161:1999)

ISO/FDIS 7043 * Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B

2012-07-19


ISO/FDIS 7044 * Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B

2012-07-19


ISO/FDIS 10663 * Hexagon nuts with flange, style 2 — Fine pitch thread 2012-07-19(Revision of ISO 10663:1999)

ISO/FDIS 12125 * Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B

2012-07-19


ISO/FDIS 12126 * Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B

2012-07-19


ISO 16047:2005/FDAmd 1

* Fasteners — Torque/clamp force testing — Amendment 1 2012-08-25


ISO/FDIS 13073-1

* Ships and marine technology - Risk assessment on anti-fouling systems on ships — Part 1: Marine environmental risk assement method of biocidally active substances used for anti-fouling systems on ships

2012-07-12


IEC/FDIS 82079-1

* Preparation of instructions for use — Structuring, content and presentation — Part 1: General principles and detailed requirements

2012-06-25

ISO/FDIS 13444 * Technical product documentation (TPD) — Dimensioning and indication of knurling 2012-07-17

TC 17 Steel

ISO/FDIS 5001 * Cold-reduced carbon steel sheet for vitreous enamelling 2012-07-12(Revision of ISO 5001:2007)

ISO/FDIS 16162 * Cold-rolled steel sheet products — Dimensional and shape tolerances 2012-07-29(Revision of ISO 16162:2010)

ISO/FDIS 16163 * Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances

2012-07-29


ISO/FDIS 15698-1

* Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements 2012-07-31

ISO/FDIS 15698-2

* Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods 2012-07-31


ISO/FDIS 8217 Petroleum products — Fuels (class F) — Specifications of marine fuels 2012-07-26


TC 29 Small tools

ISO/FDIS 5608 * Turning and copying tool holders and cartridges for indexable inserts — Designation 2012-07-22(Revision of ISO 5608:1995)

TC 31 Tyres, rims and valves

ISO/FDIS 4209-2

* Truck and bus tyres and rims (metric series) — Part 2: Rims 2012-07-15


TC 33 Refractories

ISO/FDIS 1927-1

* Monolithic (unshaped) refractory products — Part 1: Introduction and classification 2012-07-04


TC 34 Food products

ISO/FDIS 11747 * Rice — Determination of rice kernel resistance to extrusion after cooking 2012-07-11

TC 35 Paints and varnishes

ISO/FDIS 9117-4

* Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder 2012-07-18

ISO/FDIS 9117-5

* Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test 2012-07-18

ISO/FDIS 13129 * Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements

2012-08-01

TC 38 Textiles

ISO/FDIS 1140 * Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes 2012-07-11(Revision of ISO 1140:2004)

ISO/FDIS 1141 * Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes 2012-07-11(Revision of ISO 1141:2004)

ISO/FDIS 1346 * Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes

2012-07-11


ISO/FDIS 13029 * Textiles — Determination of drying rate in dynamic state by the modified sweating-guarded hotplate

2012-07-29

ISO/FDIS 13629-1

* Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method

2012-07-17


ISO/FDIS 4656 * Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)

2012-07-04


TC 54 Essential oils

ISO/FDIS 3517 * Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)

2012-07-04


TC 58 Gas cylinders

ISO/FDIS 7866.2

* Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing

2012-07-04


ISO/FDIS 11119-1

* Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l

2012-07-15


ISO/FDIS 11119-2

* Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners

2012-07-08


TC 61 Plastics

ISO/FDIS 12418-1

* Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 1: Designation system and basis for specifications

2012-07-16

ISO/FDIS 12418-2

* Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle reyclates — Part 2: Preparation of test specimens and determination of properties

2012-07-16

ISO/FDIS 1922 * Rigid cellular plastics — Determination of shear strength 2012-07-17(Revision of ISO 1922:2001)

TC 70 Internal combustion engines

ISO/FDIS 8178-9

* Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

2012-07-09

(Revision of ISO 8178-9:2000, ISO 8178-9:2000/Amd 1:2004)

TC 71 Concrete, reinforced concrete and pre-stressed concrete

ISO/FDIS 16204 * Durability — Service life design of concrete structures 2012-07-23

TC 84 Devices for administration of medicinal products and intravascular catheters

ISO/FDIS 23907 * Sharps injury protection — Requirements and test methods — Sharps containers 2012-08-01

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/FDIS 29661 * Reference radiation fields for radiation protection — Definitions and fundamental concepts

2012-07-11

TC 86 Refrigeration and air-conditioning

ISO/FDIS 13971 * Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes — Requirements and classification

2012-07-30

TC 108 Mechanical vibration, shock and condition monitoring

ISO/FDIS 18437-1

* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines

2012-07-23

TC 110 Industrial trucks

ISO/FDIS 13564-1.2

* Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity

2012-07-12

TC 113 Hydrometry

ISO/FDIS 6421 * Hydrometry — Methods for assessment of reservoir sedimentation 2012-07-12

TC 118 Compressors and pneumatic tools, machines and equipment

ISO/FDIS 11148-7

* Hand-held non-electric power tools — Safety requirements — Part 7: Grinders 2012-07-25

TC 119 Powder metallurgy

ISO/FDIS 5755 * Sintered metal materials — Specifications 2012-08-01(Revision of ISO 5755:2001)

TC 123 Plain bearings

ISO/FDIS 13939 * Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load capacity, friction coefficient and lifetime

2012-07-12


ISO/FDIS 1219-2

* Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams

2012-07-29


ISO/FDIS 6953-3

* Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators

2012-07-12

TC 146 Air quality

ISO/FDIS 16000-26

* Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2) 2012-07-18

TC 147 Water quality

ISO/FDIS 5814 * Water quality — Determination of dissolved oxygen — Electrochemical probe method 2012-07-04(Revision of ISO 5814:1990)

TC 150 Implants for surgery

ISO/FDIS 14708-2

* Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers 2012-07-15


TC 161 Control and protective devices for gas and/or oil burners and appliances

ISO/FDIS 23551-1

* Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves

2012-07-17


TC 164 Mechanical testing of metals

ISO/FDIS 12107 * Metallic materials — Fatigue testing — Statistical planning and analysis of data 2012-07-23(Revision of ISO 12107:2003)

ISO/FDIS 12108 * Metallic materials — Fatigue testing — Fatigue crack growth method 2012-07-23(Revision of ISO 12108:2002)


ISO/FDIS 13666 * Ophthalmic optics — Spectacle lenses — Vocabulary 2012-08-04(Revision of ISO 13666:1998, ISO 13666:1998/DAmd 1.2)

TC 182 Geotechnics

ISO/FDIS 22476-1

* Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test

2012-09-01

ISO/FDIS 22476-5

* Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test 2012-08-25

ISO/FDIS 22476-7

* Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test 2012-08-25

TC 184 Automation systems and integration

ISO/FDIS 18435-2

* Industrial automation systems and integration — Diagnostics, capability assessment and maintenance applications integration — Part 2: Descriptions and definitions of application domain matrix elements

2012-07-24

TC 190 Soil quality

ISO/FDIS 14238 * Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes

2012-07-22


TC 197 Hydrogen technologies

ISO/FDIS 17268 * Gaseous hydrogen land vehicle refuelling connection devices 2012-07-15(Revision of ISO 17268:2006)

TC 198 Sterilization of health care products

ISO/FDIS 13408-7

* Aseptic processing of health care products — Part 7: Alternative processes for atypical medical devices and combination products

2012-07-15


ISO/FDIS 15632 * Microbeam analysis — Instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis

2012-07-12


ISO/FDIS 16592 * Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method

2012-07-22



ISO/FDIS 17263 * Intelligent transport systems — Automatic vehicle and equipment identification — System parameters

2012-07-11

(Revision of ISO/TS 17263:2003)

TC 209 Cleanrooms and associated controlled environments

ISO/FDIS 14644-9.2

* Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by particle concentration

2012-07-25


ISO/FDIS 5436-2

* Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards

2012-07-25

(Revision of ISO 5436-2:2001, ISO 5436-2:2001/Cor 1:2006, ISO 5436-2:2001/Cor 2:2008)

TC 215 Health informatics

ISO/IEEE FDIS 11073-10406

* Health informatics — Personal health device communication — Part 10406: Device specialization — Basic electrocardiograph (ECG) (1- to 3-lead ECG)

2012-11-01

TC 218 Timber

ISO/FDIS 16415 * Non-structural timber grading requirements 2012-07-15

TC 219 Floor coverings

ISO/FDIS 11638.2

* Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification

2012-07-23

TC 221 Geosynthetics

ISO/FDIS 10772 * Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions

2012-07-25

ISO/FDIS 10776 * Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, under load

2012-07-18

IULTCS International Union of Leather Technologists and Chemists Societies

ISO/FDIS 17131 * Leather - Identification of leather with microscopy 2012-07-25

CASCO Committee on conformity assessment

ISO/IEC FDIS 17065

* Conformity assessment — Requirements for bodies certifying products, processes and services

2012-07-18

(Revision of ISO/IEC Guide 65:1996)


ISO/IEC/IEEE FDIS 8802-11

* Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications

2012-10-19

(Revision of ISO/IEC 8802-11:2005, ISO/IEC 8802-11:2005/Amd 6:2006, ISO/IEC 8802-11:2005/Amd 4:2006, ISO/IEC 8802-11:2005/Amd 5:2006)

ISO/IEC 14443-2:2010/FDAmd 2

* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface — Amendment 2: Additional PICC classes

2012-07-16

ISO/IEC 14496- * Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 2012-07-12

3:2009/FDAmd 3

3: Transport of unified speech and audio coding (USAC)

ISO/IEC FDIS 29174-2

* Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2: Registration procedures

2012-07-15

(Revision of ISO/IEC CD 29174)

ISO/IEC 9995-7:2009/FDAmd 1

* Information technology — Keyboard layouts for text and office systems — Part 7: Symbols used to represent functions — Amendment 1

2012-07-17

ISO/IEC FDIS 29120-1

* Information technology — Machine readable test data for biometric testing and reporting — Part 1: Test reports

2012-07-25

Standards published

New International Standards published between 01 May and 31 May 2012


** French version of standard previously published in English only

Price group

TC 2 Fasteners

ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread

H

ISO 7041:2012 * Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12

B

ISO 10509:2012 Hexagon flange head tapping screws C

TC 4 Rolling bearings

ISO 10285:2007/Amd 1:2012

Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances — Amendment 1

XZ


ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method G


ISO 30005:2012 * Ships and marine technology — Ship recycling management systems — Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations

M

ISO 11347:2012 Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings

M


ISO 6433:2012 Technical product documentation — Part references C

TC 17 Steel

ISO 630-3:2012 * Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels J

ISO 630-4:2012 * Structural steels — Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates

H


ISO 7240-10:2012 * Fire detection and alarm systems — Part 10: Point-type flame detectors Q

ISO 7076-1:2012 * Fire protection - Foam fire extinguishing systems — Part 1: Foam proportioning equipment

E

ISO 7076-2:2012 * Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment

F

TC 22 Road vehicles

ISO 11452-9:2012 * Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters

T

ISO 13296:2012 * Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions

F

ISO 13044-1:2012 * Road vehicles — 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations — Part 1: General requirements and definitions

C

ISO 4106:2012 * Motorcycles — Engine test code — Net power M

TC 27 Solid mineral fuels

ISO/TS 13605:2012

* Solid mineral fuels — Major and minor elements in hard coal ash and coke ash — Wavelength dispersive X-ray fluorescence spectrometric method

H

TC 29 Small tools

ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges H

TC 34 Food products

ISO 15163:2012 Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatography of chymosin and bovine pepsin contents

K

ISO 15174:2012 Milk and milk products — Microbial coagulants — Determination of total milk-clotting activity

E

ISO/TS 17193:2011

Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)

C

ISO 7513:1990/Amd 1:2012

* Instant tea in solid form — Determination of moisture content (loss in mass at 103 degrees C) — Amendment 1

XZ

ISO 24115:2012 * Green coffee — Procedure for calibration of moisture meters — Routine method H

TC 37 Terminology and other language and content resources

ISO/TS 11669:2012

Translation projects — General guidance Q

TC 39 Machine tools

ISO 26303:2012 * Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools

S


ISO 5296:2012 Synchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and inch dimensions

F

TC 42 Photography

ISO 18913:2012 * Imaging materials — Permanence — Vocabulary L

ISO 18926:2012 * Imaging materials — Information stored on magneto-optical (MO) discs — Method for estimating the life expectancy based on the effects of temperature and relative humidity

L

ISO 18933:2012 * Imaging materials — Magnetic tape — Care and handling practices for extended usage M

ISO 20462-3:2012 * Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality ruler method

M

TC 43 Acoustics

ISO 17497-2:2012 * Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field

H


ISO 16834:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification

G

ISO 21952:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification

G

ISO 24598:2012 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification

J

ISO 22825:2012 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys

L


ISO 2782-1:2012 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods

G

ISO 2782-2:2012 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method

D

ISO 2951:2012 * Rubber, vulcanized or thermoplastic — Determination of insulation resistance D

ISO 21461:2012 Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds K

TC 46 Information and documentation

ISO 23081-1:2006 Information and documentation — Records management processes — Metadata for records — Part 1: Principles

K

TC 59 Buildings and civil engineering works

ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures

M

TC 61 Plastics

ISO 1183-1:2012 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method

E

ISO 13975:2012 * Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production

G

ISO 17088:2012 Specifications for compostable plastics D

ISO 11833-1:2012 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm

G


ISO/TS 29001:2010

Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations

P

ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves

W

ISO 13500:2008/Amd 1:2010

Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests — Amendment 1: Barite 4,1

XZ

ISO 13503-1:2011 Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids

K

TC 68 Financial services

ISO 17442:2012 * Financial services — Legal Entity Identifier (LEI) C

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 1135-4:2012 Transfusion equipment for medical use — Part 4: Transfusion sets for single use H

ISO 11040-6:2012 Prefilled syringes — Part 6: Plastic barrels for injectables E

TC 79 Light metals and their alloys

ISO 13092:2012 * Titanium and titanium alloys — Titanium sponge A

TC 92 Fire safety

ISO 14934-3:2012 * Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method

H

ISO/TR 26368:2012

Environmental damage limitation from fire-fighting water run-off M

TC 94 Personal safety -- Protective clothing and equipment

ISO 4007:2012 * Personal protective equipment — Eye and face protection — Vocabulary XA

TC 106 Dentistry

ISO 6876:2012 Dentistry — Root canal sealing materials E


ISO 21940-23:2012

* Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines

L

ISO 13379-1:2012 Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines

Q

TC 110 Industrial trucks

ISO/TS 3691-8:2012

Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community

D

TC 113 Hydrometry

ISO/TR 24578:2012

* Hydrometry — Acoustic Doppler profiler — Method and application for measurement of flow in open channels

S

TC 120 Leather

ISO 11398:2012 * Raw ostrich skins — Description of defects, guidelines for presentation and grading on C

basis of defects

TC 126 Tobacco and tobacco products

ISO 15152:2003/Amd 1:2012

Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis method — Amendment 1: .

XZ

ISO 15153:2003/Amd 1:2012

Tobacco — Determination of the content of reducing substances — Continuous-flow analysis method — Amendment 1: .

XZ

ISO 15154:2003/Amd 1:2012

Tobacco — Determination of the content of reducing carbohydrates — Continuous-flow analysis method — Amendment 1: .

XZ

ISO 15517:2003/Amd 1:2012

Tobacco — Determination of nitrate content — Continuous-flow analysis method — Amendment 1: .

XZ


ISO 1219-1:2012 * Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications

XC

TC 145 Graphical symbols

ISO 7000:2012 * Graphical symbols for use on equipment — Registered symbols free

TC 146 Air quality

ISO 16000-19:2012

Indoor air — Part 19: Sampling strategy for moulds N

TC 147 Water quality

ISO 11350:2012 * Water quality — Determination of the genotoxicity of water and waste water — Salmonella/microsome fluctuation test (Ames fluctuation test)

R

TC 150 Implants for surgery

ISO 11658:2012 * Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface modifications for extracorporeal perfusion systems

C

ISO 9714-1:2012 * Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters D

TC 156 Corrosion of metals and alloys

ISO 9227:2012 Corrosion tests in artificial atmospheres — Salt spray tests K

TC 160 Glass in building

ISO 12543-6:2011/Cor 1:2012

Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1

free


ISO 16534:2012 * Thermal insulating products for building applications — Determination of compressive creep

H

ISO 16535:2012 * Thermal insulating products for building applications — Determination of long-term water absorption by immersion

E

ISO 16536:2012 * Thermal insulating products for building applications — Determination of long-term water absorption by diffusion

C

ISO 16537:2012 * Thermal insulating products for building applications — Determination of shear behaviour E

ISO 16544:2012 * Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions

G

ISO 16545:2012 * Thermal insulating products for building applications — Determination of behaviour under cyclic loading

D

ISO 16546:2012 * Thermal insulating products for building applications — Determination of freeze-thaw resistance

C


ISO 8578:2012 * Microscopes — Marking of objectives and eyepieces B

ISO 17123-4:2012 * Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors)

L

ISO 19980:2012 * Ophthalmic instruments — Corneal topographers L

TC 193 Natural gas

ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition

S

ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations

H

TC 199 Safety of machinery

ISO/TR 14121-2:2012

* Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods

R


ISO/TR 13185-1:2012

* Intelligent transport systems — Vehicle interface for provisioning and support of ITS services — Part 1: General information and use case definition

S

ISO 24534-1:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 1: Architecture

D

ISO 24534-2:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 2: Operational requirements

J

ISO 24534-3:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 3: Vehicle data

P

ISO 24534-4:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 4: Secure communications using asymmetrical techniques

X

ISO/TS 26683-1:2012

* Intelligent transport systems — Freight land conveyance content identification and communication (FLC-CIC) — Part 1: Context, architecture and referenced standards

W


ISO 23145-2:2012 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density

D

TC 207 Environmental management

ISO 14045:2012 Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines

R

ISO/TR 14047:2012

Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO 14044 to impact assessment situations

X

ISO/TR 14049:2012

Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis

T

TC 211 Geographic information/Geomatics

ISO 19148:2012 Geographic information — Linear referencing X


ISO 21090:2011 Health informatics — Harmonized data types for information interchange XC

TC 217 Cosmetics

ISO 24443:2012 Determination of sunscreen UVA photoprotection in vitro N

TC 220 Cryogenic vessels

ISO 21013-4:2012 * Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service

E

TC 223 Societal security

ISO 22300:2012 * Societal security — Terminology F

ISO 22301:2012 * Societal security — Business continuity management systems --- Requirements M

ISO 22320:2011 Societal security — Emergency management — Requirements for incident response L

TC 225 Market, opinion and social research

ISO 20252:2012 Market, opinion and social research — Vocabulary and service requirements R

TC 229 Nanotechnologies

ISO/TS 10797:2012

Nanotechnologies — Characterization of single-wall carbon nanotubes using transmission electron microscopy

Q

ISO/TR 13014:2012

* Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment

Q

TC 246 Project committee: Anti-counterfeiting tools

ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods

N


ISO/IEC 10646:2012

* Information technology — Universal Coded Character Set (UCS) XC

ISO/IEC 9834-1:2012

* Information technology — Procedures for the operation of object identifier registration authorities: General procedures and top arcs of the international object identifier tree — Part 1:

M

ISO/IEC 18023-1:2006/Amd 1:2012

* Information technology — SEDRIS — Part 1: Functional specification — Amendment 1 XZ

ISO/IEC 18023-3:2006/Amd 1:2012

* Information technology — SEDRIS — Part 3: Transmittal format binary encoding — Amendment 1

XZ

ISO/IEC 18024-4:2006/Amd 1:2012

* Information technology — SEDRIS language bindings — Part 4: C — Amendment 1 XZ

ISO/IEC 29192-1:2012

* Information technology — Security techniques — Lightweight cryptography — Part 1: General

G

ISO/IEC 15938-9:2005/Amd 1:2012

* Information technology — Multimedia content description interface — Part 9: Profiles and levels — Amendment 1: Extensions to profiles and levels

T

ISO/IEC 24730-2:2012

* Information technology — Real time locating systems (RTLS) — Part 2: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol

C

ISO/IEC 24730-21:2012

* Information technology — Real time locating systems (RTLS) — Part 21: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme

P

ISO/IEC 24730-22:2012

* Information technology — Real time locating systems (RTLS) — Part 22: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with

K

multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme

ISO/IEC 29160:2012

* Information technology — Radio frequency identification for item management — RFID Emblem

K

ISO/IEC 16680:2012

* Information technology — The Open Group Service Integration Maturity Model (OSIMM) W

Standards confirmed

The following International Standards are confimred for a five year period:

TC 4 Rolling bearings

ISO 10317:2008


ISO 1924-2:2008

ISO 5630-1:1991 (reconfirmed)



ISO 5630-5:2008

ISO 8787:1986 (reconfirmed)

ISO 9895:2008

ISO 16532-1:2008


ISO 15786:2008

TC 22 Road vehicles




ISO/PAS 13396:2009

ISO/TS 22239-1:2009

ISO/TS 22239-2:2009

ISO/TS 22239-3:2009

ISO/TS 29062:2009


TC 34 Food products

ISO 9832:2002

TC 54 Essential oils


TC 59 Buildings and civil engineering works

ISO 12006-3:2007

ISO 22263:2008

TC 68 Financial services

ISO 22307:2008

TC 83 Sports and recreational equipment


TC 96 Cranes


TC 122 Packaging


TC 185 Safety devices for protection against excessive pressure

ISO 4126-10:2010

Standards withdrawn



ISO/PAS 30005:2010 (replaced by ISO 30005:2012)

TC 17 Steel

ISO 630:1995 (replaced by ISO 630-1:2011, ISO 630-2:2011, ISO 630-3:2012, ISO 630-4:2012)

ISO 630:1995/Amd 1:2003 (replaced by ISO 630-1:2011, ISO 630-2:2011, ISO 630-3:2012, ISO 630-4:2012)


ISO 5296-1:1989 (replaced by ISO 5296:2012)

ISO 5296-2:1989 (replaced by ISO 5296:2012)


ISO 2782:2006 (replaced by ISO 2782-1:2012, ISO 2782-2:2012)


ISO 7475:2002 (replaced by ISO 21940-23:2012)

ISO 13379:2003 (replaced by ISO 13379-1:2012)


ISO Guide 72:2001 (replaced by )


ISO/IEC 24730-2:2012 (replaced by ISO/IEC 24730-21:2012, ISO/IEC 24730-22:2012)

ISO/IEC 24730-2:2006 (replaced by ISO/IEC 24730-21:2012, ISO/IEC 24730-22:2012)

Meeting calendar

(update at 01 May 2012)

Meetings called for the month of June are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

July 2012

6 San Francisco (USA)

TC 180 Solar energy

6 San Francisco (USA)

TC 180/SC 4

Solar energy/Systems - Thermal performance, reliability and durability

9-10 Shanghai (China)

TC 134 Fertilizers and soil conditioners

10-13

Geisenheim-Johannisberg (Germany)

JTC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology

16 Golden, Colorado (USA)

TC 44/SC 10

Welding and allied processes/Unification of requirements in the field of metal welding

16-17

Paris (France) JTC 1/SC 37 Information technology/Biometrics

18 Golden, Colorado (USA)

TC 44/SC 11

Welding and allied processes/Qualification requirements for welding and allied processes personnel

19 Berlin (Germany)

TC 261 Additive manufacturing

19-20

Golden, Colorado (USA)


20 Lancaster (USA)

TC 43/SC 2 Acoustics/Building acoustics

21 Stockholm (Sweden)

JTC 1/SC 29 Information technology/Coding of audio, picture, multimedia and hypermedia information

24-25

Beijing (China) TC 255 Biogas

August 2012

22-24

Berlin (Germany)

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

24 Brussels (Belgium)

JTC 1/SC 24 Information technology/Computer graphics, image processing and environmental data representation

27-31

Montreal (Canada)

JTC 1/SC 35 Information technology/User interfaces

29 Berlin (Germany)

TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

September 2012

3-6 Stockholm (Sweden)

TC 110/SC 2

Industrial trucks/Safety of powered industrial trucks

3-7 La Rochelle (France)


4-7 Zurich (Switzerland)

TC 172/SC 5

Optics and photonics/Microscopes and endoscopes

5-7 La Rochelle (France)


7 Zurich (Switzerland)


7-8 Gelendzhik (Russian Federation)

TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology

8-16 Busan (Korea, Republic of)

JTC 1/SC 36 Information technology/Information technology for learning, education and training

10 Milan (Italy) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manually transportable fire extinguishers

10 Milan (Italy) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder

10-11

Geneva (Switzerland)

JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces

10-12

Milan (Italy) * TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water

10-12

Moscow (Russian Federation)

TC 150/SC 1

Implants for surgery/Materials

10-12

Zibo city (China)


10-12

Zurich (Switzerland)

TC 209 Cleanrooms and associated controlled environments

10-14


JTC 1/SC 25 Information technology/Interconnection of information technology equipment

10-14

Nancy (France) TC 108/SC 4

Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock

10-14

La Plaine St-Denis (France)

TC 153/SC 1

Valves/Design, manufacture, marking and testing

10-14

Helsinki (Finland)

TC 190 Soil quality

11 Moscow (Russian Federation)

TC 150/SC 5

Implants for surgery/Osteosynthesis and spinal devices

11 Moscow (Russian Federation)

TC 150/SC 7

Implants for surgery/Tissue-engineered medical products

14 Beijing (China) TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection

17-18

San Diego (USA)


17-21

Seoul (Korea, Republic of)

TC 133 Sizing systems and designations for clothes

17-21

Stockholm (Sweden)

TC 165 Timber structures

18-20

Berlin (Germany)

TC 122 Packaging

19 Berlin (Germany)

TC 122/SC 3

Packaging/Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122)

19-20

Rio de Janeiro (Brazil)


19-21

San Diego (USA)

GA General Assembly

21 Graz (Austria) JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems

22 San Diego (USA)

COUNCIL Council

23-26

Sao Paulo (Brazil)

**

TC 164/SC 3

Mechanical testing of metals/Hardness testing

23-26

Vienna (Austria)


24-25

Ottawa (Canada)

* TAG 8 Building

24-25

Sao Paulo (Brazil)

**

TC 164/SC 4

Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)

24-25

Changsha (China)

* TC 264 Fireworks

24-26

Sydney (Australia)

* TC 54 Essential oils

24-28

Stockholm (Sweden)

JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

25-26

Sao Paulo (Brazil)

**

TC 164/SC 2

Mechanical testing of metals/Ductility testing

25-27

Sao Paulo (Brazil)

**

TC 164/SC 5

Mechanical testing of metals/Fatigue testing

27 Sao Paulo (Brazil)

**

TC 164/SC 1

Mechanical testing of metals/Uniaxial testing

28 Sao Paulo (Brazil)

**

TC 164 Mechanical testing of metals

Milan (Italy) **

TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems

Milan (Italy) **

TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas

Cadiz (Spain) **


September-October 2012

30-6 Paris (France) TC 106 Dentistry

3rd Quarter 2012

Frankfurt (Germany)

**

TC 184/SC 1

Automation systems and integration/Physical device control

October 2012

1-2 Ottawa (Canada)

* TC 34/SC 11

Food products/Animal and vegetable fats and oils

1-5 Vienna (Austria)

TC 247 Fraud countermeasures and controls

3 Ottawa (Canada)

* TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals

4-5 Montana-Vermala (Switzerland)

TC 226 Materials for the production of primary aluminium

5 Berlin (Germany)

* TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

6 Chicago (USA) * TC 130 Graphic technology

8 Berlin (Germany)

* TC 254 Safety of amusement rides and amusement devices

8-10 Castro Verde (Portugal)

TC 183 Copper, lead, zinc and nickel ores and concentrates

8-11 Nagoya (Japan)

TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

8-12 (USA) **


9-10 Montreal (Canada)

* TC 199 Safety of machinery

10-11

Berlin (Germany)

* TC 167 Steel and aluminium structures

10-12

Munich (Germany)

* TC 172/SC 6

Optics and photonics/Geodetic and surveying instruments

11-12

Bogota (Colombia)

* CASCO Committee on conformity assessment

11-12

Tokyo (Japan) * TC 119 Powder metallurgy

14-18

Tokyo (Japan) **

TC 10/SC 8 Technical product documentation/Construction documentation

14-19

Tokyo (Japan) TC 59 Buildings and civil engineering works

14-19

Praia do Forte (Brazil)

TC 127 Earth-moving machinery

15 Sydney (Australia)

TC 2/SC 7 Fasteners/Reference standards

15-19

Pointe-Claire, Quebec (Canada)

* TC 6 Paper, board and pulps

15-19

Riccione (Italy) * TC 45 Rubber and rubber products

15-19

Riccione (Italy) * TC 45/SC 1 Rubber and rubber products/Hoses (rubber and plastics)

15-19

Riccione (Italy) **

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

15-19

Amsterdam (Netherlands)

* TC 146 Air quality

15-19

Moscow (Russian Federation)

**



TC 2/SC 11 Fasteners/Fasteners with metric external thread


TC 2/SC 14 Fasteners/Surface coatings

17 Jeju (Korea, Republic of)

TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)

17 Berlin (Germany)

* TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability

17-19

Guilin (China) TC 202 Microbeam analysis


TC 2/SC 12 Fasteners/Fasteners with metric internal thread

18 Riccione (Italy) * TC 45/SC 2 Rubber and rubber products/Testing and analysis

18 Berlin (Germany)

TC 83 Sports and recreational equipment

18-19

Jeju (Korea, Republic of)

TC 17 Steel


TC 2 Fasteners

19 Riccione (Italy) * TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry

21-26

Sapporo (Japan)

TC 92 Fire safety

21-26

Sapporo (Japan)

* TC 92/SC 2 Fire safety/Fire containment

22-26

Rome (Italy) * JTC 1/SC 27 Information technology/IT Security techniques

22-26

Messina (Italy) * TC 8 Ships and marine technology

22-26

(Japan) **

TC 181 Safety of toys

22-27


TC 94/SC 15

Personal safety -- Protective clothing and equipment/Respiratory protective devices


**

TC 138/SC 1

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)


**

TC 138/SC 2

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies


**

TC 138/SC 4

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels


**

TC 138/SC 3

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications


**

TC 138/SC 5

Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications


**

TC 138/SC 6

Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications


**

TC 138/SC 7

Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials

25 Elda (Alicante) (Spain)

TC 216 Footwear

25-26

Tampa, Florida (USA)

TC 112 Vacuum technology

25-27

Tampa, Florida (USA)

* TC 201 Surface chemical analysis


**


(USA) **

TC 36 Cinematography

(France) **

TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

Yokohama (Japan)

**

TC 119/SC 3

Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding hardmetals)

October-November 2012

29-1 Saitama (Japan)

TC 34/SC 17

Food products/Management systems for food safety

31-7 Orlando (USA) * TC 23/SC 18

Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems

November 2012

5 Berlin (Germany)

* TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium

5-8 Warsaw (Poland)

* TC 98 Bases for design of structures

5-10 Jeju (Korea, Republic of)

**


6-8 Tokyo (Japan) * TC 17/SC 1 Steel/Methods of determination of chemical composition

6-8 Reykjavik (Iceland)

TC 234 Fisheries and aquaculture

10-17

St. Petersburg (Russian Federation)

TC 176 Quality management and quality assurance

11-16

Florida (USA) * TC 184/SC 4

Automation systems and integration/Industrial data

12-16

Kyoto (Japan) * TC 244 Industrial furnaces and associated processing equipment

15-16

Xian (China) * TC 227 Springs

16 Atlanta (USA) * TC 17/SC 12

Steel/Continuous mill flat rolled products

26-27

London (United Kingdom)

* TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes

26-30

Florianopolis (Brazil)

* TC 43 Acoustics

26-30

Florianopolis (Brazil)

* TC 43/SC 1 Acoustics/Noise

27-29

Washington, D.C (USA)

* TC 20 Aircraft and space vehicles

Wiesbaden (Germany)

**

TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements

(USA) **

TC 118/SC 6

Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems

Kyoto (Japan) **

TC 159/SC 4

Ergonomics/Ergonomics of human-system interaction

(Mexico) **

TC 229 Nanotechnologies

December 2012

11-12

Riyadh (Saudi Arabia)

* TC 211 Geographic information/Geomatics

4th Quarter 2012

(United Kingdom)

**

TC 157 Non-systemic contraceptives and STI barrier prophylactics

January 2013

7-12 London (United Kingdom)

* TC 121/SC 3

Anaesthetic and respiratory equipment/Lung ventilators and related equipment

(Unknown) **

TC 34/SC 16

Food products/Horizontal methods for molecular biomarker analysis

(Australia) **

TC 248 Project committee: Sustainability criteria for bioenergy

February 2013

4-8 St. Gallen (Switzerland)

* TC 94/SC 13

Personal safety -- Protective clothing and equipment/Protective clothing

4-9 London (United Kingdom)

* TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders

February-March 2013

25-1 (Korea, Republic of)

**


March 2013

19-22


* TC 107 Metallic and other inorganic coatings

27-28


* COUNCIL Council

(Europe) **

TC 161 Control and protective devices for gas and/or oil burners and appliances

April 2013

8-11 Helsinki (Finland)

* TC 117 Fans

17-18

Xian (China) * TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems

22-26

Berlin (Germany)

TC 108/SC 5

Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines

23-24

Dresden (Germany)

**

TC 219 Floor coverings

Paris (France) **

TC 29/SC 5 Small tools/Grinding wheels and abrasives

Salzburg (Austria)

**

TC 89 Wood-based panels

Shenzen (China)

**

TC 130 Graphic technology

(USA) **


(South Africa) **

TC 242 Energy Management

May 2013

13-16

Chicago (USA) **

TC 195 Building construction machinery and equipment

13-17

(Italy) **

TC 29 Small tools

13-17

(Italy) **

TC 29/SC 8 Small tools/Tools for pressing and moulding

13-17

Guangzhou (China)

* TC 68 Financial services

13-17

Guangzhou (China)

* TC 68/SC 2 Financial services/Financial Services, security

27-31

Shanghai (China)

* TC 4 Rolling bearings

Ottawa (Canada)

**

JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)

(China) **


Paris (France) **

TC 46/SC 11

Information and documentation/Archives/records management

(Unknown) **

TC 158 Analysis of gases

June 2013

5 Prague (Czech Republic)

**

TC 115 Pumps

17-21

Shanghai (China)

**

TC 121 Anaesthetic and respiratory equipment


**

TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements

2nd Quarter 2013

(Canada) **

TC 34/SC 4 Food products/Cereals and pulses

August 2013

26-30

(Canada) **


September 2013

18-20

St. Petersburg (Russian Federation)

* GA General Assembly

21 St. Petersburg (Russian Federation)

* COUNCIL Council

Paris (France) **

TC 17/SC 16

Steel/Steels for the reinforcement and prestressing of concrete

(Unknown) **


Victoria (Canada)

**

TC 33 Refractories

(Korea, Republic of)

**

TC 123/SC 2

Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions


**

TC 123/SC 3

Plain bearings/Dimensions, tolerances and construction details


**

TC 123/SC 5

Plain bearings/Quality analysis and assurance


**

TC 123/SC 6

Plain bearings/Terms and common items


**

TC 123/SC 7

Plain bearings/Special types of plain bearings

Tokyo (Japan) **


October 2013

7 Istanbul (Turkey)

**

TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

7-11 Istanbul (Turkey)

**

TC 38 Textiles

8 Istanbul (Turkey)

**

TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

9 Istanbul (Turkey)

**

TC 38/SC 23

Textiles/Fibres and yarns

10 Istanbul (Turkey)

**

TC 38/SC 24

Textiles/Conditioning atmospheres and physical tests for textile fabrics

11 Garching (Germany)

**

TC 60 Gears


**

TC 60/SC 1 Gears/Nomenclature and wormgearing


**

TC 60/SC 2 Gears/Gear capacity calculation

Sarajevo (Bosnia and Herzegovina)

**

TC 34/SC 12

Food products/Sensory analysis

(France) **

TC 111/SC 1

Round steel link chains, chain slings, components and accessories/Chains and chain slings

Berlin (Germany)

**

TC 172/SC 7

Optics and photonics/Ophthalmic optics and instruments

Beijing (China) **

TC 184/SC 2

Automation systems and integration/Robots and robotic devices

(Japan) **


November 2013

10 Okinawa (Japan)

**


10-15

Mexico (Mexico)

* TC 113 Hydrometry

(France) **


4th Quarter 2013


**

TC 106 Dentistry

Gaithersburg (USA)

**

TC 172/SC 9

Optics and photonics/Electro-optical systems

Month unknown 2013

(Australia) **

REMCO Committee on reference materials

(South Africa) **

TC 27 Solid mineral fuels

(South Africa) **


(Unknown) **

TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

(South Africa) **


Porto de Galinhas (Brazil)

**

TC 135/SC 9

Non-destructive testing/Acoustic emission testing

(Norway) **

TC 138/SC 1

Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)

(Brazil) **

TC 155 Nickel and nickel alloys

(Sweden) **


Amsterdam (Netherlands)

**

TC 164/SC 5

Mechanical testing of metals/Fatigue testing

(Unknown) **

TC 173/SC 2

Assistive products for persons with disability/Classification and terminology

(South Africa) **


(Sweden) **


(Portugal) **

TC 228 Tourism and related services

(Finland) **

TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions

February 2014

(South America)

**


May 2014

15 London (United Kingdom)

* TC 68 Financial services


**

TC 46/SC 11

Information and documentation/Archives/records management

September 2014

(South Africa) **


October 2014

Prague (Czech Republic)

**

TC 135 Non-destructive testing

Month unknown 2014

(USA) **


(Brazil) **


Beijing (China) **

TC 36 Cinematography

(Germany) **


(Japan) **


(USA) **


2nd Quarter 2015

(China) **

TC 172/SC 7

Optics and photonics/Ophthalmic optics and instruments

Month unknown 2015

(South Africa) **


(Finland) **


London (United Kingdom)

**


(China) **

TC 155 Nickel and nickel alloys

Month unknown 2016

(Australia) **


Iso Update June2012

Documents

Transcript of Iso Update June2012