IPEX_Aqualift

8/9/2019 IPEX_Aqualift

http://slidepdf.com/reader/full/ipexaqualift 1/11

Work With

Water &

Air

Pressure

CONSULTANTS – ENGINEERS – TRADERS

FIRST TIME IN PAKISTAN

PROFILE FOR AUTOMOBILE LIFTERS



INTRODUCTION OF OUR

COMPANY

Now IPEX INDUSTRIAL PROJECTS EXPORT (PVT) LTD wanted to serve Pakistan automobile

industry that why IPEX introducing world first class heavy duty lifting products to Pakistan

automobile assemblers and workshops and service stations.

We know that in Pakistan Safety of the Moveable property and Safety of workers is a big question

mark, AQUALIFT meet the safety demand of all countries Like America and European Union.

AQUALIFT is also approved by all major Car Manufacturers Like Buick, Cadillac, Chevrolet,

Chrysler, Dodge, GMC, Ford, Jaguar, Rover, Mercedes, BMW, Porsche, General Motors, VW, Audi,

Peugeot, Renault, Citron, FIAT, Alfa Romeo, Volvo, Saab, Toyota, Nissan, Mazda, Honda, Isuzu,

Mitsubishi, Subaru, Suzuki, Hyundai, KIA, Daewoo, SsangYong.

Apart from Universal standard Lifts we can also offer Tailor made Lifts according to vehicle specific

requirement.

These lift are maintenance free and give continue service around the Clock, you just need electric

for your air compressor, a full tank of compressed air the sufficient for the whole day. This is ideal inthe situation when the power shutdown for hours, your AQUALIFT gives you non-stop service.

We hope the Workshops, Service Station and Car assembler will like the AQUALIFT.

Please let us know the details of your Building where you want to install the AQUALIFT so that our

expert can give you better suggestion. Our installation engineers are available any time to visit your

site/factory where you want to install AQUALIFT.



UNI 2.35

TECHNICAL DATAOperating Pressure 12.5 bar 180 psi

Capacity 3500 kg 9000 lbs

Lifting height 1860 mm 73 1 / 4 “

Effective stroke of 1920 mm 75 3 / 5 "

Drive over 60 mm 2 3 / 8 "

Cylinder diameter 210 mm 8 1 / 4 "

Ram distance 1410 mm 55 1 / 2 "

Depth 2498 mm 98 1 / 3 "

Lifting / Lowering time 40 sec

( Lengthwise adjustable aluminum slider plate )

___________________________________________________________________________________

UNI 2.35 PLUS

TECHNICAL DATAOperating Pressure 12.5 bar 180 psi


Lifting height 1860 mm 73 1 / 4 “


Drive over 60 mm 2 3 / 8 "



Depth 2498 mm 98 1 / 3 "


(Length-crosswise adjustable aluminum slider plate)



JIB 2.35

TECHNICAL DATA

Operating Pressure 12.5 bar 200 psi

Capacity 3500 kg 10,000 lbs

Lifting height 1860 mm 73 1 / 4 "


Drive over 50 mm 2 "

Arm clearance 90 mm 3 1 / 2 "



Depth 2498 mm 98 1 / 3 "


( Telescopically extensible swing arms )

______________________________________________________________________________

JIB 2.35 PLUS

TECHNICAL DATA









Depth 2498 mm 98 1 / 3 "Lifting / Lowering time 40 sec

( Dual telescopically extensible swing arms )



SPORT 2.32

TECHNICAL DATAOperating pressure 12 bar 175 psi




Drive over 50 mm 2 ""

Arm clearance 75 mm 3 "


Ram distance 2285 mm 90 "

Depth 2498 mm 98 1 / 2 "


( Dual telescopically extensible swing arms )

______________________________________________________________________________

DUPLEX 4.60

TECHNICAL DATA

Operating pressure 11 bar 175 psi








Depth 2498 mm 98 1 / 3 "


( Triplicate telescopically extensible swing arms )



DUPLEX ALU TRACK 4.50

TECHNICAL DATAOperating pressure 10 bar 145 psi

Capacity 5000 kg 11 000 lbs



Platform length 4800 mm 189 "



Depth 2498 mm 98 1 / 3 "


( DUPLEX – piston for optimal statics )

______________________________________________________________________________

QUAD ALU TRACK 4.50

TECHNICAL DATA

Operating pressure 10 bar 145 psi




Platform length 4800 mm 189 "



Depth 2498 mm 98 1 / 3 "


( Sliding block system for wheel alignment modules, axle lifter, etc )



QUAD ALU TRACK 4.60





Platform length 5500 mm 216 1 / 2 "



Depth 2498 mm 98 1 / 3 "


(Flexible mounting rails-and box section-system)

______________________________________________________________________________

ACCESSORIES

FLAT CARRIER SUPPORT

ADAPTER

1. 2. 3.

Rubber pad Rubber pad Rubber pad

290 x 335 x 20 mm 120 x 120 x 20 mm 70 mm

TOP11007 (1 set / 4 pcs.) TOP11006 (1 set / 4 pcs.) TOP11005 (1 set / 4 pcs.)

4.

Rubber pad

140 mm

TOP11035 (1 set / 4 pcs.)



SWING ARM

ADAPTER

1. 2. 3. 4. 5. 6. 7.

1. Stacking adapter 2. Stacking adapter 3. Stacking adapter NCV3

d 130 x d 45 / 25-55 mm d 130 x d 45 / 25-90 mm d 45 x d70 / 125-250 mm


4. Stacking adapter prism 5. Stacking adapter U-form 6. Stacking adapter extension

d 45 / 182-312 mm d 130 x d 45 / 193-295 mm 80 mm


7. Stacking adapter extension

130 mm

TOP11023 (1 set / 4 pcs.)

______________________________________________________________________________

ACCESSORIES

PLATEFORM

ACCESSORIES

1. Drive on ramp

For installation flush with floor level

TOP12121



2. Drive on ramp

For floor incumbent installation

TOP12122

3. Drive on stop

TOP12129

4. Roll bar

TOP12138

5. Axle lifter

2000 kg. pneumatic, incl. slide rails

TOP12149

2500 kg, pneumatic, incl, slide rails

TOP12150

6. Slide rail set

Incl. fastening material

TOP12151



7. Platform motches for turn tables +

Sliding plates in splitted design

Incl. leveling plates and compensating pieces

TOP12154

8. Wheel alignment

Support

1350 mm 600 mm

TOP12152 TOP12153

9. Illumination set

Alu Track

TOP12167



10. Surround frame DUPLEX

4800 mm galvanized, for install. Flush with floor

level

TOP12171

11. Surround frame DUPLEX

4800 mm galvanized, for install. Flush with floor

level

TOP12171

12. Surround frame QUAD

4800 mm galvanized, for install, flush with floor

level

TOP12169

5500 mm galvanized, for install, flush with floor

level

TOP12173

13. Automatic floor leveling system

DUPLEX, 4800 mm

QUAD, 4800 mm QUAD, 5500 mm

TOP12168 TOP12172

IPEX_Aqualift

Documents

Transcript of IPEX_Aqualift