C U R R I C U L A M V I T A E : -C U R R I C U L A M V I T A E : -

T O TA L E X P E R I E N C ET O TA L E X P E R I E N C E = 5 Y E A R S= 5 Y E A R SIMRAN PASHA s/o JAHANGIR PASHAMobile: +918050223536 (India) +966509684121(Saudi Arabia)Email: imranpasha.mnv@gmail.com OBJECTIVE:To work in challenging environment where hard work coupled with inspiration leads togrowth of the organization.

EDUCATIONAL QUALIFICATION:Bachelor of Mechanical Engineer from Visvesvaraya Technology University at Belgaum.

WORK EXPERIENCE: Company Name : Al-Maimani Group of Factory

Discipline : Manufacture (Red Cellular Bricks,Polystyrene,Rockwool & Water Bottling )

Designation : Mechanical EngineerDuration :14th December to till.

Country : Saudi Arabia

One of the largest Cellular bricks manufacturing company in the Kingdom – have been approved by several consulting offices in Saudi Arabia because they offer a better solution for masonry works. I worked as a Mechanical Supervisor in Al-Maimani group of Factory, As I involved in supervisor activities and to provide mechanical engineering support and focus on the reliability of rotating equipment and machinery to plant operation and maintenance of rotating equipment to effectively and efficiently achieve high degree and reliability for plant production output.

Organising routine servicing schedules.

Allocating work to a team of Mechanical Technicians.

Carrying out quality inspections.

Responding immediately to equipment breakdowns.

Fixing faults or arranging for replacements to be installed.

Report work progress to Managers.

Making scheduled checks on machinery and parts

Finding and fixing faults and recalibrating instruments.

Overhauling and replacing parts according to schedule.

Involved Over haul of Hot Air Generator.

Inspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts & bearings.

Inspecting, troubleshooting, repairing or replacing pneumatic equipment such as diverters, air compressors, lubricators, hoses, and coils.

Inspect & Troubleshoot of Strapping Machine,Rotary Fans,Travelling Fans and Blowers.

Performing preventive maintenance inspections of plant equipment and maintain in Reliable Operation.

Company Name : Rabou- Al Araf Company Discipline : Oil and Gas CompanyDesignation : Mechanical EngineerDuration : 1st July 2012 to 30th June 2014 Country : Oman

I worked as Mechanical Supervisor as a secondment in Petroleum Development of Oman , As I involved in supervisor activities and to provide mechanical engineering support and focus on the reliability of rotating equipment and machinery to plant operation and maintenance of rotating equipment to effectively and efficiently achieve high degree andreliability for plant production output.

Handling the Projects of Maintenance Planning activities.Involved any maintenance difficulties problems and solved it.Arrange materials/spares and tools for onsite.Everyday meeting conducted for work discussion.Spare parts ordered and keep stock for ready.HSE follows everyone Instructed.Able to finish job with in time.Proficient with Microsoft Office and also, Basic computer knowledge.

Summary of professional work experience:

Primary technical resource for maintenance & troubleshooting of Rotating equipment such

as compressors, turbines, blowers, pumps, gearboxes and associated drive systems.

Proficient in installation, operation, Preventive, Predictive, breakdown maintenance and

Troubleshooting of all types of pumps, compressors and turbine.

Over hauling of Compressors, Pumps, Diesel Engine, and Gas Turbine and all types of

Industrial valves including pneumatic Control valves.

Installation of wide range of pipeline equipments and maintenance.

Familiar with condition monitoring of all Rotating Equipments.

To perform overhauling of all types rotating equipments.

Overhauling centrifugal gas compressor.

Follow HSE policy and lifting tool colour code.

Well conversant with cutting, welding & fabrication of pipes & structural work. Planned

& emergency shutdowns, planning & execution of various jobs carried out in turn around.

Installation & commissioning of process equipments.

Expertise in Preventive maintenance, Corrective maintenance, Overhauling and Trouble

shooting of process equipments.

Able to achieve and maintain zero incidents and accidents with prevailing safety

standards.

Prepare daily, weekly & monthly preventive maintenance reports.

Have effective communication and inter-personal skills.

Good knowledge of IVMS (In Vehicle Monitoring System).

Prepares various reports, including daily, weekly and monthly maintenance activity

reports, equipment problems, overtime reports, manpower studies, capital and maintenance budget forecasts and materials forecasts, etc. for review by immediate supervisor.

Technically analyze various equipment failures, decide corrective actions and discuss with

Technical Support Engineers and supervises implementation of repair procedures.

Updates and maintain equipment history records, drawing & technical ref. Materials.

Enforces the implementation of health, safety and Environment Management system and

also promote awareness of its use among all division and department personnel.

Carried out procedures for maintenance of machinery according to Vendors specifications

in coordination with planning section.

Investigates and analysis of faults/failures of machines and their causes for proper

rectification and prevention.

Executes maintenance management program, preventive maintenance and schedule

maintenance, and manpower and equipment utilization.

In charges of warranty claim from vendor during plant startup and commissioning.

Inspecting various parameters such as Vibration, Bearing temperature, Sound, RPM, and

Alignment Checks.

Enforcing to follow HSE procedures, Daily Tool Box talk, Task Site Instruction for sub

contractors.

Acted as technical consultant for planners, maintenance supervisors and operation

supervisors in developing methods for maintenance work execution and/or planning such work.

Preventive and Predictive Maintenance program set up and execution.

Order materials, with purchasing department assistance, that are not routine or maintained

as stock items for maintenance and operations

Supervises various maintenance, testing & overhauling jobs on rotating equipment &

auxiliaries; such as. Pumps, compressors, turbines, blowers, fin-fans, mixers, gas engines, etc.

Typical operations include dismantling of rotating equipment, inspecting internals,

assessing equipment condition for parts replacement / repair, reassembling & test-checking.

Exposure to condition monitoring techniques .

Company : R.B.S.S.N Company.Discipline : MiningPosition held : Worked as a Maintenance Engineer.Period : From July 2010 to June 2012.Country : India.

JOB RESPONSIBILITIES:

Assist in resolution planning for long-term mechanical asset concerns (reliability threats).

Assess equipment performance data and identify and lead activities to ensure optimal reliability and efficient performance.

Assist in cost estimation of corrective-maintenance, preventive-maintenance.

Assist in turnaround planning and execution.

Working in Shift looking after planning of Maintenance activities.

Man power planning.

Inspection and Execution of job.

Preventive Maintenance.

Mechanical Repairs and Break down Maintenance.

Maintenance of Slurry Pumps, Gear boxes, Belt conveyors, Drive chains, Vibrating Screens and Valves.

Maintenance of Rotary Equipments like, Drum Scrubber, Trommel.

Maintenance of Hydraulic System like, Hydraulic Power pack and Hydraulic Gear Box.

Able to work on technical details, have strong analytical & practical field engineeringskills, with a very strong & dynamic leadership.

Very good knowledge of English both verbal & written, highly effective communications & interpersonal skill.

Good working knowledge of process pumps, industrial compressors and turbines, fan and blowers with associated equipment.

Good knowledge on MS Projects and Primavera P6.

PERSONNAL POSITIVE STRENGTH:

Social Adaptability.Hard working confident and highly self motivated.Ability to perform well even under pressure Self-organizingAdaptable and able to work independently and as part of a teamOptimistic and having good interpersonal skills.

I am committed to ensuring that all work I undertake is carried out in a safe and efficient manner, to this end I have attended the following courses. Standard for Training Certificate and Watch Keeping for Seafarers (STCW-95).

Course Name Name of The Institute Date ofIssue

Place ofIssue

Fire Prevention and Fire Fighting

Yak Management &Marine Education

Centre

14/12/2011 MUMBAI

Elementary of First Aid Yak Management &Marine Education

17/12/2011 MUMBAI

CentrePersonal Safety and Social Responsibilities

Yak Management &Marine Education

Centre

21/12/2011 MUMBAI

Proficiency in Survival Techniques

Yak Management &Marine Education

Centre

24/12/2011 MUMBAI

Helicopter Underwater Escape Techniques

Yak Management &Marine Education

Centre

26/12/2011 MUMBAI

HSE Induction N.T.I 02/07/2012

OMAN

Initial Fire Response N.T.I 06/07/2012

OMAN

Dealing with Hazard and Risk

N.T.I 26/07/2012

OMAN

H2S Awareness and Escape N.T.I 04/08/2012

OMAN

SKILLS: Windows and Office Tools - MS Office Engineering Application - AutoCAD , Primavera P6 and Solid Edge.

Languages and Exposure Fluent in English Multicultural Supervision Middle East Experience

PERSONAL PROFILE:Name : Imran pashaFathers name : Jahangir pashaDOB : 06-06-1988Sex : Male.Marital Status : SingleNationality : IndianLanguages Known : English, Kannada, Hindi and TeluguHobbies : To play Cricket & Volley ballPERMANENT ADDRESS:Rahemat nagar, Near Bilal Masjid, Raichur Road Manvi.Post: Manvi-584123.Dist: Raichur.State: Karnataka.

DECLARATION:

I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Place: Manvi. Signature.

Date: (IMRAN PASHA).