HYBRID TORQUE WRENCH · Real-time digital display The LCD permits real-time confirmation of the...
Transcript of HYBRID TORQUE WRENCH · Real-time digital display The LCD permits real-time confirmation of the...
http://www.adrec-jp.com
1-1-12, Sengari, Kamo, Niigata 959-1327, JapanTEL : +81-256-52-1160 FAX : +81-256-52-1146
E-mail : [email protected]
HYBRID TORQUE WRENCH
Appropriate
tightening
to get a tight fit
Multipurpose
tool!
Innovation A variety of functions
3
A variety of functions will back upthe production system.
Real-timedigital displayThe LCD permits real-time confirmation of the tightening torque.
High-function digital torque wrench●Range of the tightening can be set arbitrarily.●Large-capacity memory : 6,000 cases●Work and measuring condition setting : 10 patterns
Bar graphThe bar graph on the LCD permits real-time confirmation of the tightening condition.
Wireless communicationTo allow a plurality of real-time management, and support a variety of systems .
Drip proof & IndicatorIt is possible to work in the outdoor environment regardless of the day and night by LCD lamps and the loud buzzer.
Torque & AngleBy measuring the torque and angle at the same time, it delivers a variety of functions .
Options
2
Full of useful interfaces
Full of interface build cases using the two-way wireless communication(Optional)
USB connection
Two-way wireless real-time data control(*Optional)
RS232C connectionNon-voltage contact converterLAN (*Optional)
Real-time monitor
*The options need separate detailed arrangements.
USB connection Two-way wireless(*Optional)Two-way wireless(*Optiona
NEW Tightening data controlEXCEL.CSV
Past 10 years from the launch
Making further progress,
"HYBRID TORQUE WRENCH" has been reborn.
The biggest feature of adrec products are "digital traceability".
Ultra-lightweight:1/3-1/2 of the weight of conventional tools.
Appreciation by means of the sense of sight, hearing, and touch.
We will help to enhance the customer's traceability management
in a feature-rich.
Tightening management conditions setting
Real-time control display (*Optional)
Tightening data control
Strong support for tightening work Traceability Contorol Tools
4 5
Functionality, reliability, and usability are our missions.
Bar graph & LED display, buzzer sound, and vibration stimulate three senses
Twice tightening prevention function
Blue LED
Setting:Lower limit - Upper limit Blue LED light up
*Some models are not supported.
Indicator Specifications function
Big torque wrench
HTWC-400
Drip proof & Indicator
*Some models are not supported.
*Microsoft.NET Framework4.0 or higher is required .
(Drip proof suport IPX6)
Setting:Over the upper limitRed LED light up
Buzzer sound & vibrationRed LED
Standard software (Supplied free)
Real time monitor (Supplied free on angle option)
Optional : [Ang]Angle calibration product
*Operating environment Windows XP SP3 or later , Vista , 7 ,8.1 ,10 and Microsoft.NET Framework3.5 is required.
Visual Studio / Access / Excel name or logo are registered trademarks or trademarks of Microsoft Corporation.
Stage warning Specified value Over torque
4
Indicator Specifications function
Big torque wrench
HTWC-400
Drip proof & Indicator
*Some models are not supported.
(Drip proof suport IPX6)
Stage warning Specified value Over torque
●Simplified commands ●Various events ●Cumbersome process of the communication control [Make library all]
Communication class library Type : HTW-DLL
Application development environment
Available in only References
at
A
Enable communication under Excel macro
Data receiving and completion event
Command executionVarious settings
Optional : [Ang] or [Dch]
If you re-tightening the screw which has already been tightened in specified torque, by monitoring the torque and angle at the same time, you can prevent the twice tightening operation.
PC Tool has a variety of functions . Data setting of the torque wrench.Read and save work data to PC.Excel conversion function.
●It's possible to analyze a relation between the torque (Turning , twisting force) and the angle.
●Easy to realize the measurement of torque and angle, you can easily graph drawing and data collection of the PC.
●You can directly transfer data to the "Excel"
Communication class library supports communication with the torque wrench.Application development environment " Visual Studio " is, of course , available under the "Excel " macro environment of your daily , enables a unique system built by the customer .
It is possible to work in the outdoor environment regardless of the day and night by LCD lamps and the loud buzzer.
It is possible to significantly reduce the development time of system development .It also enables the construction of torque management system
in those unaccustomed to the communication control .
PC tool
Communication class library(DLL)
Real time measurement of the torque and the angle
nt
Product details
6 7
High quality is achieved with a design which corresponds to needs.
Angle added (Optional)
Wireless function
Model Description
Common Standard Specifications
█Direction of load
█Measuring accuracy
█Memory Function
█Measurement mode
█Work control Condition setting function
█Power
█ Interface
█Standard accessories
HTW-DLL
█Sleep function/ Auto power OFF function
Total length
Effective lengthg
*The weight of the exchange head is excluded.
*Torque wrench only.The weight of the exchange head and display is excluded.
Options apply List
*100N・m type With all of the optionsModel(ex.) HTW C - 100 Ⅱ P - TI - Ang - ZE
Model
HTWC-10Ⅱ
HTWC-25Ⅱ
HTWC-50Ⅱ
HTWC-100Ⅱ
HTWC-200Ⅱ
HTWC-300Ⅱ
HTWC-400Ⅱ
HTWC-600Ⅱ
Tightening range
2~10N・m
5~25N・m
10~50N・m
20~100N・m
40~200N・m
60~300N・m
80~400N・m
120~600N・m
Min.reading
0.01N・m
0.01N・m
0.01N・m
0.1N・m
0.1N・m
0.1N・m
0.1N・m
0.1N・m
Effective length
226mm
249mm
268mm
321mm
460mm
650mm
875mm
1065mm
Square drive
6.35mm
9.53mm
9.53mm
12.70mm
12.70mm
19.05mm
19.05mm
19.05mm
Total length
291mm
318mm
337mm
394mm
536mm
730mm
955mm
1152mm
Weight
0.19kg*0.22kg*0.29kg*0.42kg*0.77kg*1.19kg*1.65kg*2.33kg*
ZigBee/IEEE 802.15.4(TELEC's work design certification granted)
2.4GHz (2405~2480MHz)
11ch~26ch (All 16ch)
1~15
30m~60m(Changed by the use environment)
Communication class library Model Supported OS Overview
Model
HTWS-1.5Ⅱ
HTWS-3Ⅱ
HTWS-5Ⅱ
ModelHTWC/HTWS
ModelHTWS-1.5・3.0・5.0
HTWC-10・25HTWC-50
HTWC-100・200HTWC-300・400・600
P○○○○
Screw type
TG××○○○
ID×××○○
TI×××○○
Ang×○○○○
Dch×○○○○
ZE○○○○○
Max. torque( )
Pin typeNothing
P:Pin type
Drip-proof specification(IPX6)Nothing
TG=Drip-proofID:Indicator
TI:Drip-proof & Indicator
AngleNothing
AngDch
WirelessNothing
ZE
Tightening range
0.3~1.5N・m
0.6~3.0N・m
1.0~5.0N・m
Min.reading
0.001N・m
0.001N・m
0.001N・m
Effective length
145mm
145mm
145mm
Square drive
6.35mm
6.35mm
6.35mm
Total length
195mm
195mm
195mm
Weight
0.09kg*0.09kg*0.09kg*
ModelAngDch
Angle calibration○×
Detection start minimum torqueMax.torque 5%~Max.torque 1%~
Decomposition
0.1°
Angle accuracy
±2°+1digit
Measurement range
1°~999°
955mm
1152mm
1.65kg
2.33kg*
Total length Weight
*
Wireless standard
Channel number
Group ID
Equipment specificationI/O:USB Mini B D-Sub 9Pin
Shape:Box type
Size:L67×W67×H28
Characteristic
ZC-101W
I/O:USB A
Shape:Box type
Size:L75×W67×H28
ZC-201W
I/O:USB A
Shape:USB dongle type
Size:L70×W23×H9
ZC-202W
External output options specification
No-voltage output terminal
16 points
[ModeA]OK/NG signal Each 8 -point output (ID:1~8)[ModeB]OK/NG Count management completed signal Torque wrench ID[1~255]
ZC-501W
ZC-501W-IO
*Data communication of output port
will be either the " Ethernet " or " RS-232C " .
▶HTWCⅡ(Exchange Head Type) Series
▶HTWSⅡ(Display Separation/Exchange Head Type)Series
The exchange shank There are two types of the "quick-change type (standard)" , "pin -locking".
Please specify when ordering (The price is the same amount).Model ex. of ordering【HTWC-10ⅡP】
Right and left or one way setting possible.Automatic Detection of tightening direction
±1% +1digit
Max.6,000 cases
Peak hold/Run mode
Setting condition:Max. 10patternsNumber of control times:Continuous~999times
Lithium battery(Built-in)Working hours:About 18 hours(100 times/H:Wired specification)
・QCH ratchet head・Dedicated PC software・USB cable・Charging adapter
RS232C compliant/USB connection
Communication frequency band
Communication distance
Early type,No USB terminal can be connected to
equipment in the " PLC / sequencer ", etc.
Characteristic
Characteristic
It is to ensure the compatibility and ZC-101w ·
ZC-201W, was realized small size, low cost.
It is corresponding to the Ethernet environment ,
also to allow connection to the management PC
(torque wrench dedicated software) and the data
server and the PLC (sequencer) device , you can
further expand the potential of the system
construction .
Operating environment Windows XP SP3 or later ,
Vista ,7, 8.1,10 and Microsoft.
NET Framework3.5 is required.
It will be offered at the "Com object ".
When you do reference setting
in the development environment,
it is available .
Characteristic
It is to ensure compatibility with the ZC-101W, is equipped with a connection terminal that can withstand the harsh environment of the manufacturing site. And low-cost implementation .
I/O Specification
USB port
Mini B 1port
Baud rate115,200
LAN connector
10/100BASE-T 1port*RS232CD-SUB 9 pin(male)*Baud rate
9,600・19,200・38,400・115,200
Wireless receiver
Applicable model: ZC-101W/ZC-201W/ZC-202W/ZC-501W
Applicable model: ZC-101W/ZC-201W/ZC-202W/ZC-501W/ZC-501W-IO
QCH10
QCH25
QCH50
QCH100
QCH200
QCH300.400
QCH600Square drive
HCH25
HCH50
HCH100
HCH200
2.5
4
6
8
3
5
8
10
4
6
10
12
5
8
12
14
6
10
14
17
45
55
65
80
10
12
15
18
HTWS-1.5/3/5 HTWC-10/25
HTWC-50
HTWC-100
HTWC-200
8
QCH ratchet head
6.35(1/4)
9.53(3/8)
12.7(1/2)
19.0(3/4)
19.0(3/4)
24
31
32
39
46
54
68
19 7.5 12
15.5
16
19.5
23
27
34
55
65
80
100
125
12
15
18
22
30
HTWS-1.5/3/5/ HTWS-10
HTWC-25
HTWC-50
HTWC-100
HTWC-200
HTWC-300.400
HTWC-600
HCH hexagon Model Width W L1 φD1 Applicable torque wrench
RCH50
RCH100
RCH200
8
55
65
80
12
15
18
7
11
12
17
8
11
17
12
17
24
17
24
32
8
13
19
10
12
19
13
19
27
19
27
36
9
14
22
13
22
14
21
30
22
30
41
10
24
14
21
31
HTWS-1.5/3/5 HTWC-10/25
RCH ring head Model L1TS φD1 Applicable torque wrench
SCH300
SCH400
HTWS-1.5HTWS-3HTWS-5
HTWC-10HTWC-25
5.56789
1011129
101112131416121314161718191718192122241718192122232426272122232426272930
1112141618202224182022242628322426283234363834363844485034
36.538.5424446485254424446
48.552545860
3.23.54
4.54.55
5.56
4.55
5.56
6.57
7.56
6.57
7.58
8.598
8.59
13141617181921
17181921222427212224273032
2730323641
293032353638414650323536384146505460
26283234363842
34363842444854424448546064
5662667484
5860647072768292100647072768292100108120
6.57
7.58
8.5910
88.5910101112101011121314
1213141517
45
55
65
80
100
125
10
12
15
18
22
30
16
18
24
26
32
42
SCH spanner head Model Width WWidth W S T S T L1 D2φD1 Applicable torque wrench
Model Square drive S H G R L1 φD1 Applicable torque wrench
15
19
HTWC-50
HTWC-100
HTWC-200
HTWC-300/400
HTWC-600
12
12
17
15
SCH25
SCH50
SCH100
SCH200
SCH600
10
13
15
45 10
HTWC-50
HTWC-100
HTWC-200
RCH2518
19
32
25
34
42
35
45
58
31
33
43
49.5
25 11
14
20
20
45 10
Fig-2
Fig-1
10
11
Width W
Standardhead
Made-toorderheads
H287×W200
Special exchange headsfor HTWC / HTWS
Silicone jacketUsed exclusively for HTW/HTWC/
HTWS/HTW2·I/HTW2·IC/HTW2·IS