Hubble Space Telescope Paper Model
8
Based on a design by Ton Noteboom Distributed with permission by Space Telescope Science Institute www.hubblesite.org The real Hubble Space Telescope Hubble Space Telescope Paper Model Pattern Pieces: Print this document on cover-weight paper or cardstock. The assembled model Downloads, instructions, and other information at: www.hubblesite.org/go/model Hubble Space Telescope This model is based on the configuration after Servicing Mission 3B, conducted by the crew of STS-109 in March, 2002
Transcript of Hubble Space Telescope Paper Model
Based on a design by Ton Noteboom
Distributed with permission by Space Telescope Science Institute
www.hubblesite.org
The real Hubble Space Telescope
Hubble Space TelescopePaper Model Pattern Pieces: Print this document on cover-weight paper or cardstock.
The assembled model
Downloads, instructions, and other information at: www.hubblesite.org/go/model
Hubble Space TelescopeThis model is based on the configuration after Servicing Mission 3B, conducted by the crew of STS-109 in March, 2002
75 8475
73
52
85 78
7584
75
73
52
85 78
Cut out along outlines
Light blue areas arewhere glue is applied.
This piece’s number
Number of the piece that attaches here
Fold along dashed lines(score before cutting out)
Forward shield
Hubble Space Telescopeside view
Aft shroud
Base
Top
Front
Solarpanel
High-gainantenna
High-gainantenna
OTAbays
Aperturedoor
Forward shield
Hubble Space Telescopefront view
Aft shroud
Base
Top
Solarpanel
Solarpanel
High-gainantenna
OTAbays
Aperturedoor
Pattern key:Construction tips: When assembling your model, keep track of which pieces are which by only cutting out the pieces you need for the particular part you are assembling, and lightly writing the number of the piece in pencil on the back.
Print this pattern onto white cardstock; it looks best in color. You may want to have extra printouts handy in case you need them.
The directions (in a separate file) can be printed on regular paper in black-and-white.
The Hubble Space TelescopeView from front View from side
Pattern scale:
This model is designed to be at 1:48 scale relative to the real Hubble Space Telescope.
To ensure your model hasn’t been resized during printing, measure this scale.
1 inch
1 inch1 cm
Hubble Space Telescope Model Pattern — Page 11 in
ch
1 inch1 cm
1
1
2
1
2
2
Aft shroud
Hubble Space Telescope Model Pattern — Page 21 in
ch
1 inch1 cm
3
5
9
10
11
Forward shield (6) attaches here
Front of telescope
�
4
4
Shaping piece
(goes inside of aft shroud)
Aft shroud
Hubble Space Telescope Model Pattern — Page 31 in
ch
1 inch1 cm
6
911
10
6
×
×
×
×
15
Do
or
Cut out all four squares that look like: ×
Forward Shield
Hubble Space Telescope Model Pattern — Page 41 in
ch
1 inch1 cm
9
10
11
129
4
6
10 11
78
Secondary Mirror (optional)
Primary Mirror (glue foil to surface)
13
12
14
6
6
OTA Bays
Hubble Space Telescope Model Pattern — Page 51 in
ch
1 inch1 cm
20
21
15
22
23
24
25
Aperture door
High-gain antenna
Hubble Space Telescope Model Pattern — Page 61 in
ch
1 inch1 cm
18 19
16
17
�
end
of d
owel
�
tow
ard
s te
lesc
op
e
�
end
of d
owel
�
tow
ard
s te
lesc
op
e
Solar Panelsd
owel
gui
de
— d
owel
s sh
ould
be
this
leng
th.
