HINGES - ASSA ABLOY · HINGES Assa offers a comprehensive range of hinges meeting all requirements,...

36

Transcript of HINGES - ASSA ABLOY · HINGES Assa offers a comprehensive range of hinges meeting all requirements,...


HINGES


HINGESAssa offers a comprehensive range of hinges meeting all requirements,

from the simplest case to the most demanding security door.

Assa hinges are available with a number of security enhancing functions,

e.g. security pins that make it impossible to lift the door off.

Together we can even develop hinges to meet your or your company’s

specific requirements for design and construction.


Assa Mini Catalogue 2006 276

Hinges, Nomenclature

Right Hand Door, Left Hand Door

Look at the door/window at the hinge side to determine whether it is right or left handed.If the hinges are on the right, it is a right hand door/window.If the hinges are on the left, it is a left hand door/window.

Traditional style: Hinges with welded knobs on hinge pins in traditional style.

Security pins: Hardened steel pins that prevent forced entry on the hinge side of the door.

Centre lineWhen the hinge positioning has been determined, the position for preparations in the door (window, hatch etc.) can be defined. After spring width S has been added, the preparation in the frame (cabinet frame etc) can be determined.

Automatically closing doorsPositioning in vertical direction, see Doors below.Spring hinges 2220, 2228, and 2248 are positioned in the centre of the door.

French doorsJournal-supported hinges and coupling hinges are mounted 150 mm from the corner of the frame. The third hinge is placed in between the other two hinges. When four are hinges are fitted, the fourth one is positioned 150 mm below the top hinge.The dimensions are measured to hinge centre line.

WindowsJournal-supported hinges and coupling hinges are mounted 150 mm from the corner of the frame. The third hinge is placed in between the two other ones.The dimensions are measured to hinge centre line.

Doors

Door hinges is positioning, see fig. 1-4.

Hinges 1 and 2 is positioning, see fig. 1 and 2.

Doors with height 21M (door leaf 2040 mm).

Doors with other height then 21M (door leaf 2040 mm).

Two hinges

Centre line 250

250

fig. 2fig. 1

Two hinges

Centre line

Symmetry line door leaf

770

770

Tree hinges

250

1

2

3

fig. 3

Four hinges

250

250

1

3

4

2

fig. 4

Centre line

Centre line

Centre line Centre line

Centre line

Centre line

Centre line

Centre line

S

Centre line


Assa Mini Catalogue 2006 277

Hinges

Grades/Dimensioning

Classification of HingesIn accordance with standard EN 1935. Hinges can be classified depending on their strength and durability.

Windows, 3-glazedFor number of hinges, please see diagram 4. Height and width refer to external frame dimensions for single-light windows. 1 M = 100 mm.

Hinge typesFor outward opening windows, use journal-supported hinges 1228 or coupling hinges 1206-65 or 1205.For increased protection against forced entry, use journal-supported hinges 3220.For inward opening windows, use journal-supported hinges 1223-100-1 and coupling hinges 1206-65 or 1205.

Windows, 2-glazedPlease refer to diagram 5 for number of hinges per frame. Height and width refer to external frame dimensions for single-light windows. 1 M = 100 mm.

Hinge typesFor outward opening windows, use journal-supported hinges 1222, 1228, 1212 and coupling hinges 1201,1207-65 or 211.

For increased protection against forced entry, use journal-supported hinges 3220.For inward opening windows, use journal-supported hinges 1223-85, 1223-100 and coupling hinges 1201 or 211.

GRADING TABLE FOR LIFT-OFF HINGES

Hinge type EN 1935

1212 5

1222 5

1228 8

1223-85 5

1223-100 8

2418 7

2472 9

2465 4

2010 10


Assa Mini Catalogue 2006 278

Hinges

Grades/Dimensioning

GRADING TABLE FOR JOURNAL-SUPPORTED HINGES

Hinge type EN 1935

3012 14

3210 11

3211 13

3212 11

3213 13

3220 11

3225 13

3228 13

3229 13

3232 13

3244 13

3248 13

3278 14

3288 14

3240, 3241* 13

*N.B. Together with door leaf 3228, 3229 3244 or 3248

Height

16M 3 3 3 3 3 3 3 3 3 3

15M 3 3 3 3 3 3 3 3 3 3

14M 3 3 3 3 3 3 3 3 3 3

13M 3 3 3 3 3 3 3 3 3 3

12M 3 3 3 3 3 3 3 3 3 3

11M 2 2 2 2 3 3 3 3 3 3

10M 2 2 2 2 2 3 3 3 3 3

9M 2 2 2 2 2 2 3 3 3 3

8M 2 2 2 2 2 2 2 3 3 3

7M 2 2 2 2 2 2 2 3 3 3

6M 2 2 2 2 2 2 2 3 3 3

5M 2 2 2 2 2 2 2 3 3 3

4M 2 2 2 2 2 2 2 3 3 3

Width 5M 6M 7M 8M 9M 10M 11M 12M 13M 14M

Height

19m 3 3 3 3 3 3 3 3 3 3 3 3 3 3

18m 3 3 3 3 3 3 3 3 3 3 3 3 3 3

17m 3 3 3 3 3 3 3 3 3 3 3 3 3 3

16m 3 3 3 3 3 3 3 3 3 3 3 3 3 3

15m 2 2 2 2 3 3 3 3 3 3 3 3 3 3

14m 2 2 2 2 3 3 3 3 3 3 3 3 3 3

13m 2 2 2 2 3 3 3 3 3 3 3 3 3 3

12m 2 2 2 2 2 3 3 3 3 3 3 3 3 3

11m 2 2 2 2 2 3 3 3 3 3 3 3 3 3

10m 2 2 2 2 2 3 3 3 3 3 3 3 3 3

9m 2 2 2 2 2 3 3 3 3 3 3 3 3 3

8m 2 2 2 2 2 2 2 2 2 2 3 3 3 3

7m 2 2 2 2 2 2 2 2 2 2 3 3 3 3

6m 2 2 2 2 2 2 2 2 2 2 3 3 3 3

5m 2 2 2 2 2 2 2 2 2 2 3 3 3 3

4m 2 2 2 2 2 2 2 2 2 2 3 3 3 3

4M 5M 6M 7M 8M 9M 10M 11M 12M 13M 14M 15M 16M 17M


Assa Mini Catalogue 2006 279

Hinges

Selection & Dimensioning

Door with spring hingesWhen you have determined the weight and width of the door, please see diagram 3 for recommended size and the number of hinges.

French doorsFor number of hinges, please see the diagram.Height and width refer to external frame dimensions.1 M = 100 mm.The number of coupling hinges is always 3.

Hinge typesFrench doors in ground floor.For outward opening French doors, use journal-supported hinges 3228, 3244 or 3248.For inward opening French doors, use journal-supported hinges 3229.For coupled French doors, use coupling hinges 1205.

French doors above ground floorFor outward opening French doors, use journal-supported hinges 3220.For inward opening French doors, use journal-supported hinges 3229.

For journal-supported hinges according to this recommendation the number of hinges is indicated in brackets in diagram 3.

Height

22M 3 3 3 (4)

21M 3 3 3 (4)

20M 3 3 3 (4)

8M 9M 10M Width

pcs

pcspcs

pcs


Assa Mini Catalogue 2006 280

Hinges

Selection & Dimensioning

Information below are general recommendations.Variations may occur due to the product which the hinges are used in, the environment etc.

A.Exterior doors, light-weight exterior doors institutional doors etc.Unrebated doors: 3248, 3228, 3288, 3278Rebated doors: 3229

B.Interior doors, light-weigt interior doors institutional doors etc. Unrebated doors: 3220, 2465, 2418Rebated doors: 3229

C.Steel doors3012, 3012-01

D.Garage doors3278, 3288

E.Automatically closing doorsTwo way swing doors: 280One way swing doors: 279Unrebated automatically closing doors: 2220, 2228, 2248

F.Outward opening French doors:3228, 3244, 3248, 3210Coupling hinges: 1206-65, 1206, 1207-65

G.Inward opening French doors: 3229Coupling hinges: 1206-65

H.Outward opening windows3-glazed: 1228, 32202-glazed: 1222, 1212Coupling hinges:3-glazed: 1206-65, 12052-glazed: 1201, 211, 1207-65

I.Inward opening windows With weather seal: 1223-01-100Without weather seal: 1223-100Coupling hinges: 1201, 1206-65, 211, 1205

J.Buttt hinges for hatches, cases, sherds, attics, collapsible tables, ladders etc.8, 10, 12, 14, 18, 5000, 5001, 5002


Assa Mini Catalogue 2006 281

Hinges

Unrebated Rebated

Field 1228, 2 pcs 1223-100,

3 pcs

1 2418, 2 pcs

3212, 2 pcs

3220, 2 pcs

Field 1228, 3 pcs 3229, 2 pcs

2 2418, 3 pcs

3220, 3 pcs

3212, 3 pcs

K1227-110, 2 pcs

Field 3210, 2 pcs 3229, 3 pcs

3 3211, 2 pcs

3225, 2 pcs

3228, 2 pcs

3232, 3 pcs

3244, 2 pcs

3248, 2 pcs

K1227-110, 3 pcs

Field 3210, 3 pcs 3229, 4 pcs

4 3211, 3 pcs

3012, 2 pcs

3225, 3 pcs

3228, 3 pcs

3232, 4 pcs

3244, 3 pcs

3248, 3 pcs

3278, 2 pcs

3288, 2 pcs

Field 3012, 3 pcs

5 3210. 4 pcs

3211. 4 pcs

3225, 4 pcs

3228, 4 pcs

3248, 4 pcs

3278, 3 pcs

3288, 3 pcs

With knowledge of the door weight this should be cross-refermed with the width of the door out the graph below, to identify which hinges should be fitted.

Note that while it is common practice to fit two hinges to lightweight doors, Assarecommended that at least three hinges should always be fitted. This is especially important when a door closer is used.

The graph below can be used if positioning of the hinges are made after positioning on page 276.


Assa Mini Catalogue 2006 282

Hinges

Adjustment

Height adjustment When height adjusting hinges, it is important to ensure that all hinges are supporting after the adjustment. Therefore, hinges with stepless height adjustment are recommended.

Lift-off hinges, journal-supportedThe height is adjusted by placing one or several adjustment discs 249 through the adjustment disc slot on the door leaf so that the disc(s) are placed between the pins in the knuckle. When doing this, the door must be lifted a few millimetres but is not to be lifted off.

Lift-off hinges The door is lifted off and a disc is placed over the hinge pin.

Hinges with stepless height adjustmentThese hinges incorporate a built-in adjustment screw in the hinge pin. The height can be adjusted steplessly with a 3 mm Allen key.

Spring hinges 2220, 2228 and 2248Since these hinges are not supporting they do not need height adjustment. When the belonging supporting hinge is adjusted within appropriate limits the spring hinge follows without influencing function.

Horizontal adjustmentHorizontal adjustment may be necessary because the door/window touches the frame or the chink on the lock side is too wide.

These hinges can easily be adjusted horizontally with the adjustment screws. First loosen fixing screws A and security pin B a couple of turns. Adjust then the hinges by turning the adjustment screws C out or in. Tighten thereafter screws A and B.

Adjust both screws C equally so that the hinge is not askew.

Adjustment of spring powerSpring hinges are adjusted with a pin supplied with the hinges. Place the pin in the knob hole and turn it so that the adjustment pin can be released. Turn the knob to increase or decrease the spring power. The adjustment pin is replaced in the adjustment knob.

A

A

C

B

A

C


Assa Mini Catalogue 2006 283

Hinges Hinges

As all constructions including moving parts, hinges need some maintenance to function faultlessly over their entire life time. The amount of maintenance needed depends on e.g. opening frequency, strain and environment.Maintenance consists of:

• overhaul• cleaning• lubrication

OverhaulOverhaul of hinges should be carried out frequently. The overhaul interval is determined by opening frequency and load.

You should control the following at least once a year:• function• need for lubrication• possible loose screws

This can be carried out in connection with the overhaul and control of locks, door closer, weather seals, glass panes, putty and painting.

CleaningAs hinges are worn, a fine black dust is spread around the bearing. The dust also often settles on the frame and the door/window/hatch door. The best way to avoid the dust is to keep the hinges well-lubricated.

Function Hinges should function easily, be undamaged and securely fastened in both frame and door. The door should not touch frame or threshold when it is closed. Damaged or worn-out hinges should be replaced. Loose screws should be tightened. Loose hinges impair the door function, increase wear on the hinges and make break-in easier.

Screws in newly installed doors must always be tightened after a few months when the wood in the frame and the door has dried.

When necessary, the hinges are adjusted according to the instructions below. However, the reason for adjustment should be carefully analysed before the actual adjustment is carried out. Hinges often get the blame for a badly functioning door, when in fact the real reason is carelessly mounted frame or subsidence in the house.It is useless for example to adjust the hinges of a heavy door if the frame is not mounted to the wall properly.

Before adjusting the hinges, check the following:• Is the frame right by the plummet?• Are the diagonal dimensions of the frame correct?• Is the frame side straight in the rebate (does not bulge inwards or outwards)?• Is the frame rebate width correct?• Is the frame rebate width the same in different heights?• Is frame side straight?• Is the frame securely mounted in the wall?• Is the wall stabile enough to hold the frame?• Is the frame mounted so that it cannot warp?• Are the hinges securely fastened in the frame and door?• Is the door leaf straight and level?

Do not attempt to adjust the hinges if you cannot answer all the above questions in the affirmative.

Maintenance


Assa Mini Catalogue 2006 284

LubricationFor lubrication of hinges, water-free mineral lubricant or synthetic lubricant should be used. Do not use oil unless it is absolutely impossible to apply grease. It is very important to use right kind of lubricant, since stress especially in the case of journal-supported hinges can be very high.

Lubrication of journal-supported lift-off hingesThe easiest way to lubricate the hinges is through the adjustment disc slot. Lift the door a couple of centimetres and apply the lubricant. Lift and lower the door a few times and open the door wide to spread the lubricant on the whole contact surface. The lifting of the door can be done easily with the help of a foot-operated door or board lifter.

Older journal-supported hinges without adjustment disc slot are lubricated by lifting the door/window off and applying lubricant in the knuckle or on the journal. It is important to apply lubricant even on the top of the journal.

Hinges without an adjustment disc slot are lubricated either as older journal-supported hinges or by leaving the door hanging and screwing off the height adjustment screw, applying lubricant in the screw hole and retightening the screw. The lubricant is spread in the knuckle to the contact surfaces.

Simple lift-off hinges (non- journal-supported) should be lubricated as the door/window is installed and thereafter when necessary. They are lubricated in the same way as journal-supported hinges. Make sure that the contact surface between the upper and lower part is well-lubricated.After lubricating, wipe off any excess lubricant on the surface of the hinges with a dry cloth.

Lubrication of coupling hinges and butt hingesIn the case of these hinges it is not possible to reach the lubrication point. Consequently, machine oil that is not all too thin should be applied. Wipe off excess oil afterwards. Sewing machine oil is too thin and should not be used.

Lubrication of spring hinges In general, spring hinges should be demounted for satisfactory lubrication result. Lubricate even the spring so that it does not squeak against the inside of the spring housing.

Hinges

Maintenance


Assa Mini Catalogue 2006 285

Lift-off Hinges

1212, 1212-01

ApplicationFor outward opening windows, unrebated hatches etc. and slot-guided coupled windows. Combine with 1207-65.

Material• Zinc coated steel.• 1212-01 of plastic.

Features• Right or left handed.• Connection part 1212-01.

Accessories • Recommended screws six TFX 4,5 x 25.• Recommended screw for coupling bracket one TFX 4,5 x 30.

1222

ApplicationFor outward opening windows, unrebated hatches etc.

MaterialZinc coated steel.

Features• Right or left handed.• Also available in traditional style.

Accessories Recommended screws six TFX 4,5 x 25.

1228

Application For outward opening windows, unrebated hatches etc.

MaterialZinc coated steel.

Features• Right or left handed.• Also available in traditional style.

AccessoriesRecommended screws six TFX 4,5 x 25.

1212 1212-01

Dimension (mm)

Ref. no H B C D G

1222 85 36 19 11 1,6

1228 85 37 19 13,5 2

Dimension

(mm)

Screw

Ref. no S T Antal Dim.

1222 42,5 2,1 6 4,5x25

1228 42,5 2,7 6 4,5x25


Assa Mini Catalogue 2006 286

Lift-off Hinges

2418

Application For outward opening windows and unrebated lighter doors.

MaterialSteel.

Features• Right or left handed.• Several pin lengths to facilitate mounting.• Powder lacquered hinges are not suitable for outward opening windows.

Accessories Recommended screws: six TFX x 30.

1223-100, 1223-85

Application1223, for inward opening windows without weather seal.1223-01, for inward opening windows with weather seal, only 100 mm.

MaterialZinc coated steel.

Features• Right or left handed.

Accessories • Recommended screws for 1223-85: six TFX 4,5 x 25.• Recommended screws for 1223-100: six TFX 5 x 30.

1223-85


Assa Mini Catalogue 2006 287

Journal-supported Lift-off Hinges

3220

ApplicationFor unrebated doors, outward opening French doors and windows etc.

Material • Zinc coated steel.• Hardened steel pins.

Features• Right or left handed.• Journal-supported.• Also available in traditional style• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: six TFX 5 x 30.Adjustment discs 249.

3210

ApplicationFor unrebated doors, outward opening French doors and windows etc.Slot-guided. Slot; door 18 mm, frame 12mm.

Material • Zinc coated steel• Hardened steel pins

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: six TFX 4,5 x 30.Adjustment discs 249.


Assa Mini Catalogue 2006 288

Journal-supported Lift-off Hinges

3211-1

ApplicationFor unrebated doors and windows, slot-guided.Slot; door 17,3 mm, frame 12 mm.

Material• Yellow zinc-iron.• Pin of stainless steel.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: eight 4,5 x 30Adjustment discs 249.

3212

ApplicationFor unrebated windows, slot-guided.Slot; door 17,3 mm, frame 12 mm.

MaterialYellow zinc-iron.Pin of stainless steel.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: eight 4,5 x 30Adjustment discs 249.


Assa Mini Catalogue 2006 289

Journal-supported Lift-off Hinges

3228, 3228-08

ApplicationFor unrebated doors, outward opening windows etc.

Material• Zinc coated steel. Black and yellow zinc-iron.• Hardened steel pins.

Features• Version 3228-08, for security doors.• Right or left handed.• Also available in traditional style.• Journal-supported.• With adjustment disc slot for easy height adjustment.• Can be combined with 3240-01 or 3241-04, 05 on doors with steel frame.

AccessoriesRecommended screws: eight TFX 5 x 30.Can be complemented with frame-reinforcing mounting plate 248-28, fitting with machine screw. When using the mounting plate, four MFX 6 and two TFX 5 X 30 are recommended.Adjustment discs 249.Security pins 2301 for 3228-08.

3228-30

ApplicationFor unrebated doors, outward opening French doors etc.

Material Stainless steel, SS 2333.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: eight TFX 5 x 30 RF.Adjustment disc 249.


Assa Mini Catalogue 2006 290

Journal-supported Lift-off Hinges

3244

ApplicationFor unrebated doors etc.

Material• Zinc coated steel. Black and yellow zinc-iron.• Hardened steel pins.

Features• Right or left handed.• Also available in traditional style.• Half-symmetrical, journal-supported.• With adjustment disc slot for easy height adjustment.• Allows symmetrical mortise.• Can be combined with 3240-01 or 3241-04, 05 on doors with steel frame.

AccessoriesRecommended screws: eight TFX 4,5 x 25.Adjustment discs 249.

3248

ApplicationFor unrebated doors, outward opening French doors etc.

Material• Steel, zinc coated, black and yellow zinc-iron.• Hardened steel pins.

Features• Right or left handed.• Also available in traditional style.• Half-symmetrical, journal-supported.• With adjustment disc slot for easy height adjustment.• Allows symmetrical mortise.• Can be combined with 3240-01 or 3241-04, 05 on doors with steel frame.

AccessoriesRecommended screws: eight TFX 5 x 30.Can be complemented with frame-reinforcing mounting plate 248-48, fitting with machine screw. When using the mounting plate, four MFX 6 and two TFX 5 x 30 are recommended.Adjustment discs 249.


Assa Mini Catalogue 2006 291

Journal-supported Lift-off Hinges

3229

ApplicationFor rebated doors etc.

Material• Zinc coated steel. • Hardened steel pins.

Features• Right or left handed. • Journal-supported. • With adjustment disc slot for easy height adjustment. • Can be combined with 3240-01 or 3241-04, 05 for doors with steel frame.

AccessoriesRecommended screws: eight TFX 5 x 30. Can be complemented with frame-reinforcing mounting plate 248-28, fitting with machine screw. For fitting the mounting plate, four MFX 6 and two TFX 5 x 30 are recommended. Adjustment discs 249.

3232

ApplicationFor anti-squeeze unrebated doors in day-care centres, hospitals etc.

MaterialZinc coated steel.Hardened steel pins.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment. 26 mm turning allowance accommodates an anti-squeeze rubber list.• Suits same preparation as 3228.

AccessoriesRecommended screws: eight TFX 5 x 30.Can be complemented with frame-reinforcing mounting plate 248-28, fitting with machine screw. For fitting the mounting plate, four MFX 6 and two TFX 5 x 30 are recommended.Adjustment discs 249.


Assa Mini Catalogue 2006 292

Journal-supported Lift-off Hinges

3240-01

ApplicationFor steel frames. For use together with door leaf of hinges 3228, 3229, 3244 or 3248.

Material • Zinc coated steel.• Hardened steel pin.

Features• Right or left handed.• Journal-supported frame leaf.• Stepless height adjustment.

AccessoriesRecommended screws: three MFX 8 x 16.

3241-04, 3241-05

Application For steel frames. For use together with door leaf of hinges 3228, 3229, 3244 or 3248.

MaterialZinc coated steel.Hardened steel pins.

Features• Right or left handed.• Journal-supported.• Leaf width 3241-04, 46 mm. 3241-05 49 mm.• Recommended screws three MFX 8x16.


Assa Mini Catalogue 2006 293

3225-04

ApplicationFor unrebated doors, outward opening French doors and windows etc.Security doors.

Material• Zinc coated steel.• Hardened steel pins.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: eight TFX 5 x 30.Can be complemented with frame-reinforcing mounting plate 248-28, fitting with machine screw. When fitting the mounting plate, four MFX 6 and two TFX 5 x 30 are recommended.Adjustment discs 249.Security pins 2301.

Journal-supported Lift-off Hinges

K1227, Ball Bearings

ApplicationFor doors with special decorative demands.

Material Brass, polished or nickel-plated.

Features• Right or left handed.• With ball bearings.

AccessoriesRecommended screws: eight TFX 5,5 x 30.Can be complemented with frame-reinforcing mounting plate 248-28. In this case four screws MFX 6 and two wood screws according to above are recommended.Spare ball bearings 540-9.25.


Assa Mini Catalogue 2006 294

Journal-supported Lift-off Hinges

3278

Application For unrebated doors, outward opening French doors etc.

Material• Zinc coated steel.• Hardened steel pins.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: eight TFX 5 x 30.Can be complemented with frame-reinforcing mounting plate 248-28, fitting with machine screw. For fitting the mounting plate, four MFX 6 x 30 and four TFX 5 x 30 are recommended.Adjustment discs 249.

3288

ApplicationFor unrebated doors, outward opening French doors etc.

Material• Zinc coated steel.• Hardened steel pins.

Features• Right or left handed.• Half-symmetrical, journal-supported.• Allows symmetrical mortise.• With adjustment disc slot for easy height adjustment.

AccessoriesRecommended screws: eight TFX 5 x 30.Can be complemented with frame-reinforcing mounting plate 248-48, fitting with machine screw. For fitting the mounting plate, four MFX 6 and two TFX 5 x 30 are recommended.Adjustment discs 249.


Assa Mini Catalogue 2006 295

Journal-supported Lift-off Hinges

3288-09, 3288-10

ApplicationFor unrebated doors, outward opening French doors etc. security doors.

Material• Zinc coated steel.• Hardened steel pins.

Features• Right or left handed.• Half-symmetrical, journal-supported.• Allows symmetrical mortise.• With adjustment screw for easy stepless height adjustment.• With adjustment screws for adjusting the door horizontally.• Version 09 without deflection.

AccessoriesRecommended screws: eight TFX 5 x 30.Security pins 2301.Horizontal adjustment screw 2302.Mounting plate 248-48When fitting mounting plate 248-48, four MFX 6 and four TFX 5 x 30 are recommended.

3288-09

3288-10


Assa Mini Catalogue 2006 296

3012-01

ApplicationFor wooden doors with steel frame. For use with 3012 frame leaf.

MaterialZinc coated steel.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.

AccessoriesScrews: four TFX 5 x 30Adjustment disc 249.

Journal-supported Lift-off Hinges

3012

ApplicationFor steel doors with steel frame.

MaterialZinc coated steel.

Features• Right or left handed.• Journal-supported.• With adjustment disc slot for easy height adjustment.• Slot hinge.

ApplicationAdjustment discs 249.Screws depending on the frame design.


Assa Mini Catalogue 2006 297

Buttt Hinges

8, 10, 12, 14, 18, 1218

ApplicationButtt hinges for hatches, cases, sheds, attics, collapsible tables, ladders etc.

Material • Zinc coated steel • Pin of brass. • 1218 non-surface finished.

Accessories Recommended screws according to the table. 1218 is designed to be welded and does not have screw holes.

Ref. no B (mm) H (mm) D (mm) G (mm) T (mm) No. of

screws

Dim. of

screws

8-75 71 19 6,3 3,3 1,5 4 3,5×20

8-100 101 19 7,9 4 1,9 4 3,5×20

10-100 102 25,5 8,3 4 2,1 4 3,5×20

12-100 102 31,5 9,2 4,5 2,3 6 4×20

12-125 127 31,5 9,2 4,5 2,3 6 4×20

12-150 152 31,5 9,2 4,5 2,3 6 4×20

14-100 101 38 10,8 5,5 2,6 6 4,5×25

14-125 127 38 10,8 5,5 2,6 6 4,5×25

14-150 152 38 10,8 5,5 2,6 6 4,5×25

18-100 101 50,5 11,8 6,5 2,7 6 5×30

18-125 127 50,5 11,8 6,5 2,7 6 5×30

18-150 152 50,5 11,8 6,5 2,7 6 5×30

18-200 203 50,5 11,8 6,5 2,7 6 5×30

18-250 246 50,5 13,5 7 3,25 8 5×30

19-300 50,5 50,5 13,5 7 3,25 8 5×30


Assa Mini Catalogue 2006 298

Coupling Hinges

211-65

ApplicationCoupling hinges for windows.

Material • Zinc coated steel. • Pin of brass.

Features• Both halves countersunk on the rear.

AccessoriesRecommended screws: six TFX 3 x 20.

5000, 5001, 5002

ApplicationButt hinges for furniture, hatches, cases etc.

Material • Zinc coated steel. • Pin of brass.

AccessoriesRecommended screw according to the table below.

Ref.no B (mm) H (mm) D (mm) G (mm) T (mm) No. of

screws

Dim. of

screws

5000-32 30 22 4 2,2 0,9 4 2,4×16

5000-38 38 26 4,7 2,6 1,05 4 3×16

5000-50 50,5 31 5,5 3 1,25 6 3×20

5000-65 63,5 37 6 3,3 1,35 6 3×20

5001-25 25 21,5 3,6 2 0,8 4 2,4×12

5001-32 30 31 4,5 2,7 0,9 4 2,4×16

5001-38 38 32 4,7 2,6 1,05 4 3×16

5001-50 50,5 40 5,5 3 1,25 6 3×20

5001-65 63,5 48 6 3,3 1,35 6 3×20

5002-25 25,5 26,5 3,8 2,2 0,8 4 2,4×12

5002-32 32 32 4,4 2,4 1 4 2,4×16

5002-38 38 38 4,7 2,6 1,05 4 3×16

5002-50 50,5 48 5,5 3 1,25 6 3×20

5002-65 63,5 62,5 6 3,3 1,35 6 3×20


Assa Mini Catalogue 2006 299

Coupling Hinges Coupling Hinges

1201, 1205, 1206

ApplicationCoupling hinges for windows and French doors. Journal-supported hinges for lighter hatches etc.

Material • Zinc coated steel.• Pin of brass.

Features• 1205, one half countersunk on the rear.

AccessoriesAccording to the table.

Ref. no H (mm) B (mm) D (mm) G (mm) M (mm) Tool Ø T (mm) No. of

screws

Dim. of

screws

1201-65 63,5 36 6 0,7 32 20 1,35 6 3×20

1205 63,5 44 7 - 32 20 1,6 6 3,5×25

1206-65 63,5 44 7 1,2 32 26 1,6 6 3,5×25

1206-75 76 50 8 1,4 38 1,7 6 3,5×25

centre line


Assa Mini Catalogue 2006 300

Coupling Hinges

2465

ApplicationFor light-weigt interior doors.

Features• Snap-In function.• Symmetrical right/left.• Approved for B 30 doors together with Assa 2465 Fire• Also available in traditional style.

MaterialFrame leaf of steel, lacquered bronze or white.

AccessoriesRecommended screws: three TFX 5 x 25.

Antic style

3881

ApplicationCoupling hardware for windows.

Features• Right and left handed.

Material• Zinc coated steel.• Pin of plastic.

AccessoriesScrew 3,5 mm zinc coated

2010

The new frame leaf 2010 is equipped with a composite bearing hinge pin for a quiet and easily swinging door. The new bearing reduces wear and makes the frame leaf more precise, resulting with less sagging of the door. In addition, the hinges do not produce black dust.

Assa Snap-In 2010 series is available in colours white, silver and gold. Bronze is available on request. Suits also door leafs for Assa 2465.

Variant• Traditional style• Approved for B 30 doors together with Assa 2465 Fire

Hinges for Light-weigh Interior Doors


Assa Mini Catalogue 2006 301

Coupling Hinges Symmetrical Hinges

3886, 3887

ApplicationCoupling hardware for windows.

Features• Right and left.

Material• Zinc coated steel. • Pin of plastic.

AccessoriesScrew 3,5 mm zinc coated.


Assa Mini Catalogue 2006 302

2465 Fire

ApplicationDoor leaf for use together with frame leaf 2465.

Features• For fire doors.

MaterialSteel, bronze or white lacquered.

AccessoriesRecommended screws: two TFX 5 x 25.

Mounting Plates

2403, 2434, 2465

ApplicationDoor leaf for use together with frame leaf 2465.

Features• Mortise dimensions depending on the type. • For door thickness 38 mm or 39 mm.

MaterialNylon, bronze or white lacquered.

AccessoriesRecommended screws: two TFX 5 x 25.

2403

2434


Assa Mini Catalogue 2006 303

Mounting Plates

2439, 2441, 2459

ApplicationDoor leaf for use together with frame leaf 2465.

Features• Different mortise dimensions depending on the type.• For door thickness 38 mm or 39 mm.

MaterialZink, bronze or white lacquered.

AccessoriesRecommended screws: two TFX 5 x 25.

Mounting Plates

2439

2441

2459


Assa Mini Catalogue 2006 304

279, 280

ApplicationFor one- and two-way swing doors. 279 for automatically closing single-action doors. 280 for swing doors.

Material Steel, zinc coated or nickel-plated.

Features• 279, one-way spring function, supported. • 280, two-way spring function, supported. • Adjustable spring power, regardless of right or left handedness. • Adjustable closing force.

Spring Hinges

279

280

Ref. no H

(mm)

B

(mm)

C

(mm)

D

(mm)

E

(mm)

M

(mm)

G

(mm)

R

(mm)

T

(mm)

No. of

screws

Dim. of

screws

Max. door thickness*

279-100 101 38 - 22 15 50,5 9 14 4 8 4×25 -

279-150 152 48 - 28 20 76 9 18 4 10 5×30 -

280-75 76 33 48 22 15 38 9 13,5 4 8 4×25 25

280-100 101 38 54,5 22 15 50,5 11 14 5 8 4×25 30

280-150 152 48 73,5 28 20 76 11 18 5 10 5×30 42


Assa Mini Catalogue 2006 305

Spring Hinges Spring Hinges

2220, 2228, 2248

ApplicationFor unrebated automatically closing doors. 2220 for lighter doors.

Material Zinc coated steel.

Features• One-way, non-supported.• Right or left handed.• Adjustable spring power.• Adjustable closing force.• For closing function only use: - 2220 together with journal-supported hinges 3220. - 2228 together with journal-supported hinges 3228 or 3278. - 2248 together with journal-supported hinges 3248 or 3288.

The hinges have the same fitting dimensions and can therefore be combined. The depth of the mortise is the same as for supported hinges. The hinges can be lifted off after the spring power has been released.

2220

2228

2248


Assa Mini Catalogue 2006 306

Spring Hinges

2466

ApplicationFor single-action swing doors. Together with hinges 2465.

MaterialSteel, lacquered.

Features• Single-action with adjustable spring power.

AccesoriesMounting plates. See symmetrical hinges.


Assa Mini Catalogue 2006 307

Spring Hinges

248

ApplicationMounting plate for hinges in heavier doors. Frame-reinforcing for security doors.

Material Steel.

Features• Right or left handed.• Hinges are fixed to the mounting plate with machine screw M 6.• Four MFX 6 x 30 are used for frame.• Mounting on the outside of the frame.• 248-28 for hinges 3228, 3278, K1227.• 248-48 for hinges 3248, 3288.

AccessoriesRecommended screws: two TFX 5 x 30.

Hinges, Accessories

540

ApplicationSpare parts for Assa ball bearing hinges.

249

ApplicationAdjustment disc for height adjustment of doors with journal-supported lift-off hinges.

Material Steel, hardened and zinc coated.

2301

ApplicationSecurity pins of hardened steel for screwing through hinges into the frame. For hinges with holes for security pins.

2302

ApplicationScrew for adjusting the width of door chink. For screwing into the frame behind the hinge leaf of hinges that can be horizontally adjusted.Allen key 3 mm.

Ref. no For pin Ø d Dim in mm Dim in mm

d D T

540-9,25 9,25 18 7,5

540-12 12 24 8

Ref. no Dim in mm

D T

249-7X1 7 1

249-7X1,5 7 1,5

249-8,5X1 8,5 1

249-8,5X1,5 8,5 1,5

40


Assa Mini Catalogue 2006 308

96

ApplicationFlush bolt for double doors.

Material • Zinc coated steel.

Features• With pivot arm and robust design.• Material of steel for fire-rated doors.• Also available with rounded plate corners.

AccessoriesRecommended screws: three TFX 4 x 45 and two TFX 3 x 20.

Flush Bolt

97

ApplicationFlush bolt for double doors and windows.

Material • Zinc alloy with bolt of steel. • Striking plate of propene plastic.

Features• The bolt is operated by the pivot arm and is easy to install.

AccessoriesRecommended screws: two TFX 3,5 x 25.


Assa Mini Catalogue 2006 309

Flush Bolt

2396

ApplicationFlush bolt, automatic, for the passive door leaf in wooden, steel or aluminium double doors.

Features• Automatic single-action.• Bolt Ø 12 mm and with a min 17 mm throw, adjustable +10mm.• The latch is reversible.• Material of steel for fire-rated doors.• Door preparation for flush bolt 1296, 1396 and 2396 is the same.• Face plate width 22 mm.• Dimension from the face plate to the centre of the bolt is adjustable 30-36 mm.• Finish: Bright zinc-coated

Function The bolt is operated by the latch bolt.

AccessoriesStriking plate.Guide, for use in wooden doors when climate changes may affect it´s features, and in doors with profiles of various materials.

1296, 1396

ApplicationFlush bolt, manual, for the passive door leaf in wooden, steel or aluminium double doors.

Features• Manual single-action.• Bolt Ø 12 mm with 25 mm throw. Material of steel for fire-rated doors.• Door preparation for flush bolt 1296, 1396 and 2396 is the same.• Face plate width 22 mm.• Dimension from the face plate to the centre of the bolt is adjustable 30-36 mm.• Finish: Bright zinc-coated

Function The bolt is operated by the pivot arm.

AccessoriesStriking plate.Guide, for use in wooden doors when climate changes may affect its features, and in doors with profiles of various materials.