S u p e r i o r q u a l i t y a n d a c c u r a c y

The Component FamilyH i g h v a c u u m a n d u l t r a h i g h v a c u u m

f i t t i n g s & f e e d t h r o u g h f a m i l y

Family Overview

32

iso-KF FittinG FamilYDn 10 to Dn 50

INFICON ISO-KF fi ttings are manu-factured according ISO 2861/1, DIN 28403 and Pneurop 6606. These quality fi ttings are the standard vacuum components for all vacuum and high vacuum applications. They are designed and tested for leak rates less than 1 x 10-9 mbarl/s.

This line includes a wide range of:• connecting elements• seals and centering rings• fl anges• pipe fi ttings• metal bellows and hoses• PVC and rubber hoses• transition pieces/ reducers This line is available in aluminum or stainless steel 304 or 316L.

mEcHanical FEEDtHrouGH FamilYDn 16 to Dn 63

The huge variety of mechanical feedthroughs offers the right device for demanding applications, no matter if it serves e.g. in an OEM customers coating chamber or in your applied research project under laboratory conditions.

Mechanical feedthroughs are available as:• Rotary Feedtrough• Rotary/ linear combination feedthrough• Linear feedthrough

Available fl ange designs ISO-KF/ ISO-K and CF corresponds to our fi tting line.All feedthroughs are suited to work in vacuum systems with leak rates up to 1 x 10-9 mbarl/s. For UHV needs an all metal designed feedthrough is available.

iso-K / iso-F FittinG FamilY Dn 63 to Dn 630 / 1000

INFICON ISO-K quality fi ttings are manu- factured according ISO 1609, DIN 28404 and Pneurop 6606. These large diameter fi ttings are the standard vacuum compo-nents for all vacuum and high vacuum lines. They are designed and tested for leak rates less than 1 x 10-9 mbarl/s.

This line includes a wide range of:• clamp & claw connecting elements • seals & centering rings (up to DN 1000)• fl anges• pipe fi ttings• metal bellows and hoses• transition pieces/ reducers• collar fl anges with retaining ring (ISO-F) This line is available made of stainless steel 304 or 316L. Partly aluminum and nickel plated steel is available too.

ViEWport FamilY Dn 16 to Dn 160

A wide range of industrial approved viewports make this line fi tting into nearly all applications where a view port is needed.

Viewports are available in:• borosilicate glass• kodial glass• sapphire glass

Available fl ange designs ISO-KF / ISO-K / ISO-F and CF corresponds to our fi tting line.

All viewports are at least He-leck tight up to 1 x 10-9 mbarl/s. For UHV needs the CF fl anged and metal sealed UHV viewports are best suited.

cF FittinG FamilYDn 16 to Dn 250 / 350

INFICON CF quality fi ttings are manu-factured according ISO 3669 and the latest TS/ ISO 3669-2 standard. These Ultra high vacuum fi ttings are designed for UHV applications down to 1 x 10-12 mbar and bakeout temperatures up to 400°C.

This line includes a wide range of:• connecting elements • all metal gaskets• fl anges• pipe fi ttings• metal bellows and hoses• transition pieces/ reducers This line is available made of stainless steel 304L or in the higher graded 316LN ESR/ESU.

ElEctrical FEEDtHrouGH FamilYDn 16 to Dn 40

Infi con offers economicaly priced ISO-KF fl anged feedtroughs which can be found in all standard vacuum applications all over the world for many years. In addition to this feedthroughs a choice of connectors for vacuum and atmosphere side of the vacuum chamber is confi gured.

For UHV applications CF fl anged feedthroughs are available in different sizes and technical specifi cations.

For special demand our BNC/MHV Coaxial Feedthroughs, based on MIL-C-39012A, is available in 3 different fl ange design / sizes and in 5 different specifi cation ranges.

ElEctrical iso-KF FittinG FamilY

mEcHanical iso-K / iso-F FittinG FamilY

5

inFicon componEnts FamilY aDVantaGEs at a GlancE

• Competitively priced

• 100% leak tested to less than 1 x 10-9 mbar-l-s

• Complete fi tting & feedthrough component program for ISO-KF, ISO-K, ISO-F and CF Flange designs

• Design and measures follow strictly international respected standards

• Surface fi nish, welds, material specifi cations and cleanliness meet or exceed high vacuum specifi cations

• 98% of the component line is available even in bigger quantities directly from stock for immediate worldwide delivery

www.inficon.com reachus@inficon.com Due to our continuing program of product improvements, specifications are subject to change without notice.

tibb04e1 ©2011 INFICON

Asia

CHINAINFICON Ltd.BeijingPhone: +86.10.6590.0164E-mail: reach.china@inficon.com

INFICON Ltd.Guangzhou, GuangdongPhone: +86.20.8723.6963E-mail: reach.china@inficon.com

INFICON Ltd.Wanchai, Hong KongPhone: +852.2520.2880E-mail: reach.china@inficon.com

INFICON Ltd.ShanghaiPhone: +86.21.6209.3094E-mail: reach.china@inficon.com

JAPANINFICON Co. Ltd.Yokohama-shi, Kanagawa-ken Phone: +81.45.471.3328E-mail: reach.japan@inficon.com

KOREAINFICON Ltd.Kyunggi-doPhone: +82.31.783.2942E-mail: reach.korea@inficon.com

SINGAPOREINFICON PTE Ltd.SingaporePhone: +65.6890.6250E-mail: reach.singapore@inficon.com

TAIWANINFICON Co. Ltd.Chupei CityPhone: +886.3.552.5828E-mail: reach.taiwan@inficon.com

USA

INFICON Inc.

East Syracuse, NYPhone: +1.315.434.1100E-mail: reach.us@inficon.com

INFICON Inc.

Santa Clara, CAPhone: +1.408.361.1225E-mail: reach.us@inficon.com

INFICON Inc.

Austin, TXPhone: +1.512.448.0488E-mail: reach.us@inficon.com

Europe

FRANCEINFICON SARLCourtaboeuf Cedex, OrsayPhone: +33.1.6013.7695E-mail: reach.france@inficon.com

GERMANYINFICON GmbHColognePhone: +49.221.347.41321E-mail: reach.germany@inficon.com

ExcEllEnt customEr support is a commitmEnt

INFICON provides a global network of sales and service centers. These centers are staffed with local service and application experts who can assist you in choosing the best solution for your individual product application and provide fast support if service is needed.

LIECHTENSTEIN / SWITZERLANDINFICON AGBalzersPhone: +423.388.3111E-mail: reach.liechtenstein@inficon.com

UNITED KINGDOMINFICON Ltd.Blackburn, LancashirePhone: +44.1254.678250E-mail: reach.unitedkingdom@inficon.com