Godrej & Boyce Mfg. Co. Ltd. Electricals and Electronics...
Transcript of Godrej & Boyce Mfg. Co. Ltd. Electricals and Electronics...
Organizes
Two Day Workshop on
Under Technical Education Quality Improvement Program (TEQIP)
In Collaboration with
Godrej & Boyce Mfg. Co. Ltd.
(Electricals and Electronics Division)
7th to 8th May 2015
Bharatiya Vidya Bhavan’s
SARDAR PATEL COLLEGE OF ENGINEERING (Government Aided Autonomous Institute under Mumbai University)
SPCE | MED
Two Day Workshop on CNC Programming, 7th –8th May 2015 2
SARDAR PATEL COLLEGE OF ENGINEERING
Sardar Patel College of Engineering (SPCE) under the management of the Bhartiya Vidya Bhavan, was founded
by Kulapati Dr. K. M. Munshi. It was established to meet the growing demand for engineering talent.
The foundation stone of the college was laid on 17th September 1961 by Shri.Y.B.Chavan (the then Chief Minis-
ter of Maharashtra who later became the Defence Minister of India.)
The college was inaugurated by the first Prime Minister of Independent India, Pandit Jawaharlal Nehru in
1962.The college is dedicated to Sardar Vallabhbhai Patel, an eminent nation builder of independent India.
The college is autonomous and affiliated to the University of Mumbai for the full-time degree and post gradu-
ate degree courses. The institute has set high standards for aspiring engineering students and also meets the
need of quality education in the challenging world of business.
Over the last 50 years the college has gained an excellent reputation in the field of Technical Education.
Godrej & Boyce Mfg. Co. Ltd. (Electricals and Electronics Division)
Godrej Electricals and Electronics, is an ISO 9001:2004, ISO 14001:2007 and OHSAS 18001:2007 certified divi-
sion of Godrej & Boyce Mfg. Co. Ltd. And is recognized as one of the leading technology solution providers in
India in the areas of : Industrial Electronics and Automation, Power Distribution Systems, Green Building Con-
sultancy Services, Mechanical, Electrical and Public Health Engineering Projects, Power Infrastructure and Re-
newable Energy Compressed Air Solutions. The Industrial Electronics and Automation business of Godrej
Electricals & Electronics offers: CNC training machines for colleges and institutions; industrial machines for
heavy engineering industries and railways; system integration and turnkey automation projects—for oil and
gas, metal, power, aerospace, atomic energy and water industries; design, development and manufacturing of
microprocessor based embedded products.
Message from Head of Department
SPCE-MED is pleased to organize the
two day workshop on CNC Programming
for class-III supporting staff under TE-
QIP programme. This workshop is orga-
nized to improve skill sets in CNC pro-
gramming of supporting staff and add
value to their institute. This is the first
workshop in this area conducted in col-
laboration with Godrej company.
The workshop consists of : introduction
to CNC machines, part programming in CNC lathe and vertical
milling machine, maintenance of CNC machines, tooling for CNC
and introduction to DELCAM software.
Upon successful completion of this workshop the participants
will be able to work effectively in automated manufacturing
environment and apply technology to operate and contribute
towards business of manufacturing systems.. They will also be
able to handle maintenance of safe and healthy work environ-
ment.
Dr. Rajesh Buktar Head MED
Mr. Luis Dias Lab Incharge, MED
Mr. Nilesh Kelkar Instructor, MED
Mr. Nandan Gaikwad
Organizing com-mittee members
Mr. Siddheshwar Shetkar
Mr. Rajesh Keny
Mr. Pravin Lohar
Dr. S. K. Mahajan
(Chief Coordinator, SPFU) Director, Directorate of Technical Education (DTE), Maha-rashtra State, Mumbai
Dr. P. H. Sawant Principal, SPCE
Dr. M. M. Murudi Vice Principal and TEQIP coordinator
Patrons
Programme Coordinators Dr. R. B. Buktar
SPCE | MED
Two Day Workshop on CNC Programming, 7th –8th May 2015 3
Inaugural Function
The workshop inauguration was graced by presence of Chief Guest, Principal, Dr. P. H. Sawant and Vice Princi-pal and TEQIP coordinator, Dr. M.M. Murudi. Both appreciated the special initiative taken by MED for skill de-velopment of supporting staff in collaboration with industry partner, Godrej & Boyce Mfg. Co. Ltd., Mumbai.
Dignitaries on dais (L to R): Dr. P.P. Nagrale, HOD-CED; Dr. M.M. Murudi, Vice Principal & TEQIP coordinator; Dr. P.H. Sawant,
Principal; Dr. R.B. Buktar, HOD-MED, Mr. A.B. Jagtap, Maintenance superintendent, during talk by Mr. Luis Dias, Lab Incharge
Dr. P.H. Sawant, Principal, SPCE, Lighting the lamp during the inaugural ceremony
Dr. R.B. Buktar, HOD-MED Lighting the lamp during the inaugural ceremony
Mr. Yatin Mohire, Assistant Manager, Godrej & Boyce Mfg. Co. Ltd., Mumbai, lighting the lamp
Mr. Siddeshwar Shetkar felicitating Dr. P.H. Sawant, Principal, SPCE
Dr. P.H. Sawant, Principal, addressing the gathering Dr. M. M. Murudi, Vice-Principal, addressing the participants
SPCE | MED
Two Day Workshop on CNC Programming, 7th –8th May 2015 4
Hands-on Learning During Workshop
The training as well as practical sessions were conducted by Mr. Yatin Mohire, Assistant Manager, Godrej & Boyce and Mr. Nilesh Kelkar, SPCE. The participants learnt the practical lessons by operating on CNC ma-chines.
SPCE | MED
Two Day Workshop on CNC Programming, 7th –8th May 2015 5
The Learning Group
SR.NO NAME INSTITUTE
1. Mr. Patil Motiram Dattatray Dr.Babasaheb Ambedkar Tech.University Lonere
2. Mr. Deepak D. Telawane D.J.Sanghavi college of Engg. Vileparle ,mumbai
3. Mrs. Vaishali G. Joshi D.J.Sanghavi college of Engg. Vileparle ,mumbai
4. Mr. Husain Abdulla Satwilkar Rajendra Mane COE,&Tech. Devrukh
5. Mr. Sunil Pandurang Sawant Rajendra Mane COE,&Tech. Devrukh
6. Mr. Nandkumar Soma Jadhav Rajendra Mane COE,&Tech. Devrukh
7. Mr. Vaibhav V Yadav S.S.P.M. College of Engineering Kankavali
8 Mr. Sanjog Srinivas Mutalik S.S.P.M. College of Engineering Kankavali
9 Mr. S.D. Deshpande Walchand College of Engineering, .Sangali
10 Mr. S.N. Nitwe Walchand College of Engineering, Sangali
11 Mr. Vijay Sahebrao Lende Government College of Engineering, Amravati
12 Mr. Rameshware S. Wajge Government College of Engineering, Amravati
13 Mr. Nilesh Anna Dhoke Government College of Engineering, Amravati
14 Mr. Patil Pravin P FCRIT,VASHI
15 Mr. S.M. Degloorkar SGGS Institute of Engineering & Technology, Nanded
16 Mr. R.G. Gundedwad SGGS Institute of Engineering & Technology, Nanded
17 Mr. V.B. Badwane SGGS Institute of Engineering & Technology, Nanded
18 Mr. B.V Kadam SGGS Institute of Engineering & Technology, Nanded
19 Mr. B.K. Dhutmal SGGS Institute of Engineering & Technology, Nanded
20 Mr. A.V. Rakhe SGGS Institute of Engineering & Technology, Nanded
21 Mr. R.V. Maharaj SGGS Institute of Engineering & Technology, Nanded
SPCE | MED
Two Day Workshop on CNC Programming, 7th –8th May 2015 6
Glimpses