EPICYCLOIDAL GEAR BOX

EPICYCLOIDAL GEAR BOX

The standard stock General Gear epicycloidal gear boxes are the ideal solution for any type of machinery that

requires torques up to 6 Nm. Cheap and reliable are completely made in Italy.

GEAR BOX TYPE RATIO H

TORQUE LIMIT [Nm]

MAX TORQUE INTERMITTENT FUNCTION [Nm]

MAX TORQUE CONTIN.

FUNCTION [Nm]

MERCURY 1:16 33 3.5 2.0 1.0

VENUS 1:64 39 3.5 2.0 1.0

MARS 1:256 45 3.5 2.0 1.0

SATURN 1:64 45 6.0 4.0 2.0

N° 3 holes at 120 ° of radius R = 10 for self-tapping screws Ø2.9; penetration max: 9.5mm;

available penetration: 6mm

Standard gear box material (MERCURY, VENUS,

MARS)

Body and gears: Delrin 500

Output shaft: stainless steel AISI420

Sleeve bearings: self-lubricating sintered

Materials for reinforced gear box (SATURN)

Body and gears, I° stage: Delrin 500

Gears II & III stage: Hardened and tempered steel

Output shaft: AISI 420 stainless steel

Sleeve bearings: self-lubricating sintered

The motor sprocket is available with hole for shaft Ø2.3 and, upon request, with hole for shaft Ø2, Ø3.17 and Ø4.

Composition for motors with approximately Ø28

Composition for motors with approximately Ø35

The scope of supply includes:

1. Gear box

2. Flange

3. Motor sprocket for shaft Ø2.3 and, upon request,

Ø2, Ø3.17, Ø4.

The motors Ø27/28, since they have the connections

indicated are compatible with all types of our gearboxes.

The scope of supply includes:

1. Gear box

2. Flange

3. Motor sprocket for shaft Ø2.3 and, upon

request, Ø2, Ø3.17, Ø4.

4. Additional flange which increases the

proportion of H 6mm.

The motors Ø35/36, since they have the connections

indicated are compatible with the following gearboxes:

MERCURY, SATURN.

Please note that the maximum torque indicated above shall not be exceeded.

For the versions presented in this paper, the gear box shall be provided with no motor and no screws.

EPICYCLOIDAL MOTOR GEAR

EPICYCLOIDAL MOTOR GEAR

The General Gear epicycloidal motor gear boxes are the ideal solution for any type of machinery that requires torques

up to 6 Nm at 12V and 24V. Cheap and reliable are completely made in Italy.

Epicycloidal motor gear box with motor Ø28 at 12V DC

NOTE

- Gear box body Material &

gears: DELRIN

- Output shaft material:

STAINLESS STEEL.

- 1: Sleeve bearings: self-

lubricating sintered

Values are indicated at cold.

Some versions are

personalized with encoder.

Please contact our technical

department.

* Tends to stop with gradual

load.

MARS D28-12

Type Standard

Ratio 256:1

Quote L [mm] 122

Quote A [mm] 45

Io / Icc [A] 0.4 / 4

Power [W] ~12

Output R.P.M.(no load) ~35

Input Motor R.P.M. ~9000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 3.0

Torque [Nm] 0.5 0.8 1 1.2 1.5 1.8 2

Exit RPM 32 30 29 28 27 26 25

Absorbed Current(A) 0.5 0.64 0.7 0.9 1 1.2 1.4

Service Type cont. cont. cont. cont. cont. int. int.

VENUS D28-12

Type Standard

Ratio 64:1

Quote L [mm] 116

Quote A [mm] 39

Io / Icc [A] 0.4 / 3.6

Power [W] ~12

Output R.P.M.(no load) ~140

Input Motor R.P.M. ~9000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 1.75

Torque [Nm] 0.3 0.5 0.8 1 1.2 1.75

Exit RPM 120 108 90 73 60 *

Absorbed Current(A) 0.82 1.2 1.75 2.1 2.46 3.6

Service Type cont. cont. int. int. int. int.

MERCURY D28-12

Type Standard

Ratio 16:1

Quote L [mm] 110

Quote A [mm] 33

Io / Icc [A] 0.3 / 3.6

Power [W] ~12

Output R.P.M.(no load) ~560

Input Motor R.P.M. ~9000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 0.5

Torque [Nm] 0.05 0.1 0.2 0.3 0.5

Exit RPM 500 430 340 250 *

Absorbed Current(A) 0.6 1.2 1.75 2.1 3.6

Service Type cont. cont. int. int. int.

EPICYCLOIDAL MOTOR GEAR

EPICYCLOIDAL MOTOR GEAR

Epicycloidal motor gear box with motor Ø28 at 24V DC

NOTE

- Gear box body Material &

gears: DELRIN

- Output shaft material:

STAINLESS STEEL.

- 1): Sleeve bearings: self-

lubricating sintered

Values are indicated at cold.

Some versions are

personalized with encoder.

Please contact our technical

department.

* Tends to stop with gradual

load

MARS D28-24

Type Standard

Ratio 256:1

Quote L [mm] 122

Quote A [mm] 45

Io / Icc [A] 0.2 / 2

Power [W] ~12

Output R.P.M.(no load) ~35

Input Motor R.P.M. ~9000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 3.0

Torque [Nm] 0.5 0.8 1 1.2 1.5 1.8 2

Exit RPM 32 30 29 28 27 26 25

Absorbed Current(A) 0.25 0.32 0.35 0.45 0.5 0.6 0.7

Service Type cont. cont. cont. cont. cont. int. int.

VENUS D28-24

Type Standard

Ratio 64:1

Quote L [mm] 116

Quote A [mm] 39

Io / Icc [A] 0.2 / 1.8

Power [W] ~12

Output R.P.M.(no load) ~140

Input Motor R.P.M. ~9000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 1.75

Torque [Nm] 0.1 0.3 0.5 0.8 1 1.2 1.75

Exit RPM 125 120 108 90 73 60 *

Absorbed Current(A) 0.2 0.41 0.6 0.88 1.05 1.23 1.8

Service Type cont. cont. cont. int. int. int. int.

MERCURY D28-24

Type Standard

Ratio 16:1

Quote L [mm] 110

Quote A [mm] 33

Io / Icc [A] 0.15 / 1.8

Power [W] ~12

Output R.P.M.(no load) ~560

Input Motor R.P.M. ~9000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 0.5

Torque [Nm] 0.05 0.1 0.2 0.3 0.5

Exit RPM 500 430 340 250 *

Absorbed Current(A) 0.3 0.6 0.88 1.05 1.8

Service Type cont. cont. int. int. int.

EPICYCLOIDAL MOTOR GEAR

EPICYCLOIDAL MOTOR GEAR

Epicycloidal motor gear box with motor Ø36 at 12V DC

NOTE Values are indicated at cold.

Some versions are personalized

with encoder. Please contact our

technical department.

SATURN D36-12 Type Reinforced

Ratio 64:1

Quote L [mm] 140

Quote A [mm] 51

Io / Icc [A] 0.5 / 6

Power [W] ~17

Output R.P.M.(no load) ~80

Input Motor R.P.M. ~5000

Gearbox torq. lim.[Nm] 6

Starting Torque [Nm] 4.5

Torque [Nm] 0.5 1 1.5 2 2.5 3 3.5

Exit RPM 70 62 52 47 40 28 *

Absorbed Current(A) 1 1.6 2.2 2.4 2.9 3.3 6 Icc

Service Type cont. cont. cont. cont. int. int. int.

* Tends to stop with gradual load

MERCURY D36-12 Type Standard

Ratio 16:1

Quote L [mm] 128

Quote A [mm] 39

Io / Icc [A] 0.4 / 6

Power [W] ~17

Output R.P.M.(no load) ~315

Input Motor R.P.M. ~5000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 1.55

Torque [Nm] 0.2 0.4 0.6 0.8 0.9

Exit RPM 300 260 200 165 110

Absorbed Current(A) 0.8 1.4 2.3 2.7 3.3

Service Type cont. cont. int. int. int.

NOTE – Reinforced type

- Gear box body material & gears 1st

stage: DELRIN

- 2nd & 3rd stage gears: TEMPERED & HARDENED STEEL.

- Output shaft material: Stainless steel

- 1: Sleeve bearings: self-lubricating sintered

NOTE – Standard type

- Gear box body material & gears: DELRIN

- Output shaft material: Stainless steel

- 1: Sleeve bearings: self-lubricating sintered

EPICYCLOIDAL MOTOR GEAR

EPICYCLOIDAL MOTOR GEAR

Epicycloidal motor gear box with motor Ø36 at 24V DC

NOTE Values are indicated at cold.

Some versions are personalized with

encoder. Please contact our technical

department.

SATURN D36-24 Type Reinforced

Ratio 64:1

Quote L [mm] 145

Quote A [mm] 51

Io / Icc [A] 0.25 / 3

Power [W] ~17

Output R.P.M.(no load) ~80

Input Motor R.P.M. ~5000

Gearbox torq. lim.[Nm] 6

Starting Torque [Nm] 4.5

Torque [Nm] 0.5 1 1.5 2 2.5 3 3.5

Exit RPM 70 62 52 47 40 28 *

Absorbed Current(A) 0.5 0.8 1.1 1.2 1.45 1.65 3 Icc

Service Type cont. cont. cont. cont. int. int. int.

* Tends to stop with gradual load

MERCURY D36-24 Type Standard

Ratio 16:1

Quote L [mm] 133

Quote A [mm] 39

Io / Icc [A] 0.2 / 3

Power [W] ~17

Output R.P.M.(no load) ~325

Input Motor R.P.M. ~5000

Gearbox torq. lim.[Nm] 3.5

Starting Torque [Nm] 1.55

Torque [Nm] 0.2 0.4 0.6 0.8 0.9

Exit RPM 300 260 200 165 110

Absorbed Current(A) 0.4 0.7 1.15 1.35 1.75

Service Type cont. cont. int. int. int.

NOTE – Reinforced type

- Gear box body material & gears 1st

stage: DELRIN

- 2nd & 3rd stage gears: TEMPERED & HARDENED STEEL.

- Output shaft material: Stainless steel

- 1: Sleeve bearings: self-lubricating sintered

NOTE – Standard type

- Gear box body material & gears: DELRIN

- Output shaft material: Stainless steel

- 1: Sleeve bearings: self-lubricating sintered