GarudaUserManual

download GarudaUserManual

of 15

Transcript of GarudaUserManual

  • 8/2/2019 GarudaUserManual

    1/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    DE GARUDAVehicle Communication InterfaceUSER MANUAL

    Version: 1.4

    Dearborn Electronics (India) Pvt Ltd.687, 16th Main, 4th T Block, Jayanagar

    Bangalore - 560041Phone: 91-80- 22440025

    Fax: [email protected]

  • 8/2/2019 GarudaUserManual

    2/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 2 of 15

    Table of Contents1 Introduction ................................................................................................. 3

    1.1 Vehicle Networks Supported .................................................................. 31.2 Garuda Connection ................................................................................ 31.3 Application Programming Interface ........................................................ 4

    2 Know your Product ....................................................................................... 42.1 Garuda Label ......................................................................................... 52.2 Garuda Front and Rear Views ................................................................. 62.3 Connectors ............................................................................................ 6

    3 Garuda Hardware Specifications.................................................................... 73.1 Power Supply ......................................................................................... 73.2 Hardware Attributes .............................................................................. 73.3 Status Indicators ................................................................................... 73.4 Power and Network Connections ............................................................ 7

    4 Installation and Setup .................................................................................. 85 Software Setup ........................................................................................... 126 Garuda Reflash - Optional ........................................................................... 137 Technical Support ...................................................................................... 15

  • 8/2/2019 GarudaUserManual

    3/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 3 of 15

    1 IntroductionGaruda is an advanced and high performance SAE J2534 based VehicleComunication Interface (VCI) supporting CAN and KWP communications. We

    Thank you for selecting Garuda VCI for your Vehicle Communction Interfaceneeds.

    We would like to mention here the possible Garuda VCI usages:

    Vehicle Diagnostics ECU Reprograming ECU Calibration Custom applications using Passthru APIs based on SAE J2534

    We see Garuda usefull in Production, EOL and After market VCI needs.

    Illustrated Garuda VCI usage Diagram

    1.1 Vehicle Networks Supported CAN (supporting both 11 and 29 bit identifiers) ISO 15765 ISO 14230 (KWP2000)

    1.2 Garuda Connection Provides USB 2.0 communication for fast downloads (operates at full

    network speed with fast and efficient data transfers). USB cable includedwith this product can be used to connect to the PC.

    Connects to the vehicle network on SAE J1962 connector via theproprietary DLC cable, included with this product.

  • 8/2/2019 GarudaUserManual

    4/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 4 of 15

    1.3 Application Programming InterfaceAn SAE J2534-1 based dynamic link library is provided for integration withApplications to use Garuda VCI.

    2 Know your ProductDE - GARUDA Vehicle Comminication Interface is delivered to you with thefollowing parts:

    Sl. No. Item Description Reference Image

    1DE-GARUDA

    Vehicle Communcation Interface

    2 Installation CD

    3 USB Cable

    4 Proprietary DLC cable

  • 8/2/2019 GarudaUserManual

    5/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 5 of 15

    2.1 Garuda LabelThe figure below depicts the label details of Garuda:

    Connection to

    Vehicle side

    Connection to PC or

    Laptop side

    Status

    Indicators

    DB 15 ConnectorDetails

    Dearborn

    Electronics Logo

  • 8/2/2019 GarudaUserManual

    6/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 6 of 15

    2.2 Garuda Front and Rear Views

    To view the Sl. No. of your product, liftthe flap on the rear side.

    2.3 Connectors

    USB Connector View DB 15 Connector View

    DB 15 Pin Assignment

  • 8/2/2019 GarudaUserManual

    7/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 7 of 15

    3 Garuda Hardware Specifications3.1 Power Supply

    Operates on voltage range of 8 32 VDC with a nominal voltage of 12 /24 VDC

    Power Consumption (Nominal): 80 mA @ 12 V3.2 Hardware Attributes

    Dimensions : Height X Width X Depth : 24 mm X 76 mm X 112 mm Weight : 170 grams Operating Temperature : 0C to +65C Storage Temperature : 40C to +85C

    3.3 Status IndicatorsGaruda has three status LEDs that indicate activity of the following functions:

    USBOFF Garuda has NOT established a connection to PC.

    ON Garuda has established a connection to PC and Active.

    LinkOFF Vehicle network link is NOT established

    Flash Vehicle network link has been established and Active.

    PowerOFF NOT connected to a power source.

    ON Power source connected and active.

    3.4 Power and Network Connections3.4.1 OBD II CablePower for Garuda unit and vehicle network access is provided via ProprietaryDLC Cable, which can be connected to the J1962 connector on the vehicle.

    3.4.2 Custom CableA custom cable may also be used to provide power to Garuda unit and toestablish network connections to the vehicle via the DB-15 female connectionwith Garuda unit. Extreme caution is suggested with respect to Power andNetwork connections. Refer section 2.3 for Pin assignment.

  • 8/2/2019 GarudaUserManual

    8/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 8 of 15

    4 Installation and SetupStep1:Connect Garuda VCI using the USB Cable to your PC / Laptop. Ensure that theUSB LED is ON.

    Step 2:Insert the Garuda Installation CD provided with the product. Double click onthe DE Garuda.exe and follow the screens below:

    Click Next to continue installation.

  • 8/2/2019 GarudaUserManual

    9/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 9 of 15

    Enter your Name and Company details, click Next to continue installation.

    Select the Installation directory, click Next to continue installation.

  • 8/2/2019 GarudaUserManual

    10/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 10 of 15

    Click Next to continue installation.

    Installation is in Progress.

  • 8/2/2019 GarudaUserManual

    11/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 11 of 15

    Installation completed. Click Finish to exit.

    Now Garuda J2534 libraries are installed and you are now ready to proceedwith your application to use Garuda.

  • 8/2/2019 GarudaUserManual

    12/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 12 of 15

    5 Software SetupOnce the DE Garuda is successfully installed on the your system following filescould be located in installation path,

    Sl. No. File Name Description1. Garuda Demo Sample source files to refer usage of

    Garuda J2534 API Library.2. Garuda.debf Firmware file to flash Garuda3.

    GarudaConfig.exe Configuration application to configureGaruda

    4. GarudaJ2534SDK.exe Sample SDK application to test GarudaVCI with vehicle network.

    5. GarudaReflash.exe Reflash application to program GarudaVCI.

    6. GarudaUserManual.pdf User Instruction manual for DE Garuda.

  • 8/2/2019 GarudaUserManual

    13/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 13 of 15

    6 Garuda Reflash - OptionalTo upgrade the firmware for Garuda, follow the steps below.

    Step 1:Go to Program files and select the GarudaReflash application,

    Step 2:Select the .debf file located in the installation path of DE Garuda. Click onReflash.

  • 8/2/2019 GarudaUserManual

    14/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 14 of 15

    Wait for sufficient time (Approximately 10 sec) to allow OS to load USB driversfor bootloader mode. The progress bar shows the flashing progress as shownabove.

    CAUTION: Do not remove USB cable while flashing is in progress.

    Step 3:After successful flashing, the message appears as shown below.

    Note: If the Reflashing fails, please power cycle the hardware and repeat the steps 1 and 2as detailed above. If the problem persists please contact the DE Technical support team.

  • 8/2/2019 GarudaUserManual

    15/15

    GARUDAUSER MANUAL

    DATE: 10-08-11VERSION:1.4

    Dearborn Electronics Confidential Page 15 of 15

    7 Technical SupportUpgrades and Updates:

    Garuda is capable for field updates and upgrades. We will put our bestefforts to ensure that Garuda user community is notified of latestupdates and upgrades.

    Queries / Observations / Suggestions:

    Kindly feel free to contact out Technical support team to get your Queriesor Observations addressed at the earliest.

    We are glad to hear about our product from you and we are open for yoursuggestions.

    Details:Email: [email protected]:

    Techsupport TeamDearborn Electronics (India) Pvt Ltd.687, 16th Main, 4th T Block, JayanagarBangalore - 560041Phone: 91-80- 22440025 Ext: 121Fax: 91-80-26534949www.deindia.com