DCR-VX2000 148 - tcp-ip.or.jpmeisyou/topics/bideo.pdf · = —dcr-vx2000 148 . = —dcr-vx2100
FWPQ2617S Flat Wire SMD Power Inductor• Low DCR • High Saturation Current Inductance Range: 33uH...
Transcript of FWPQ2617S Flat Wire SMD Power Inductor• Low DCR • High Saturation Current Inductance Range: 33uH...
![Page 1: FWPQ2617S Flat Wire SMD Power Inductor• Low DCR • High Saturation Current Inductance Range: 33uH Packaging: 40 per Tray, 200pcs per Carton Marking: Part Number / Date Code 10/08/2015](https://reader035.fdocuments.net/reader035/viewer/2022062921/5f0393757e708231d409bb9a/html5/thumbnails/1.jpg)
FWPQ2617S Flat Wire SMD Power Inductor
Features
Electrical
Tolerance: 10%
Test Frequency: 100KHz, 100mVrms, 0ADC
Operating Temp: -40ºC ~ +85 ºC
Irms: Current at which the temperature rise willnot exceed 40 ºC above ambient.
Physical
RoHS
ALLIED COMPONENTS INTERNATIONAL949-356-1780 www.alliedcomponents.com
28.0
Irms (A)
FWPQ2617S-330K
AlliedPart
Number
INDUCTANCE±10%
10% 30%
DROP
DCR
Max.
33 8.77.0 9.6 2.86
20%DROPDROP
• Flat Wire SMD Power Choke
• Low DCR• High Saturation Current
Inductance Range: 33uH
Packaging: 40 per Tray, 200pcs per Carton
Marking: Part Number / Date Code
10/08/2015
Max.
• Frequency Range up to 1MHz
Isat: Current at which the inductance will dropby no more than the specified amount from its original Inductance without current.
Isat (A)
(uH)
All specifications subject to change without notice.
27.90 Max
1 2
Allied FWPQ2617S-330K YYWW
27.94 Max
4.00±0.1510.43
17.78 Max
0.13
3.80 Ref
6.90 Ref1 2
5.28
5.08
6.35
5.59 5.33
4.82
3
11.56
Pad is for mounting stability onlyDo not connect to groundor other circuits
1
SCHEMATIC
2
Ref
• Third Solder pad for mounting
stability only.
(mΩ)