frpstrutsystems
-
Upload
emncomposite -
Category
Documents
-
view
218 -
download
5
description
Transcript of frpstrutsystems
Call us at (84.8) 3897 8933 or email us at [email protected]
ISO 9001:2008
SOUTHERN TRADING & PRODUCING ELECTRICAL EQUIPMENT COMPANY
Strut Channels
Channel Fittings
Accessories
Supports
Fiberglass Nuts & Bolts
Threaded Rods
SOUTHERN ELECTRICAL EQUIPMENT COMPANY
GREEN TECHNOLOGY FOR TODAY AND TOMORROW
STRUT SYSTEMS
Introduction
FRP COMPOSITES / STRUT CA – 01 01/20
General
Strut system is the most widely used because it is the most complete quality line of nonmetallic accessories, fasteners, hangers, pipe clamps and channels available. Strut system is a versatile, high-strength product that can use in nearly every application. Some of those applications include: wastewater treatment, refineries, chemical plants, marinas, pulp and paper, desalination facilities, theme parks, aquariums and underground vaults. Made from entirely nonmetallic, corrosion resistant resins, Fiberglass Strut can be used in demanding environments where steel strut systems have traditionally failed. Its lightweight components can be installed quickly and easily using standard metal working tools. All strut parts incorporate the highest quality materials to provide superior chemical resistance, strength, flame resistance and ultraviolet protection
Materials & Process
Strut channels are manufactured from the pultrusion process.
Strut channels are of pultruded glass reinforced polyester or vinyl ester resin. Glass reinforced strut channels have a synthetic surfacing veil applied on exterior surfaces to improve weatherability and inhibit ultraviolet degradation. An ultraviolet stabilizer is incorporated in the resin formulation to further inhibit ultraviolet degradation.
Structural Design
All strut channels provides reliable fastening and interlocking of strut components and accessories.
Installation & Fabrication
The installation of strut channel and accessories is similar to the installation of metallic channel and accessories. All standard installation practices and procedures apply. In general, special handling is not required. Fabrication of strut components requires just three simple operations: cutting, drilling and sealing.
Features & Benefits Corrosion Resistance High Strength Lightweight Versatile Fire Retardant UV Resistant Non-Conductive Non-interfering/ Non-magnetic Cost Effective Easy to Install and Access
STRUT SYSTEMS
Strut Channels
FRP COMPOSITES / STRUT CA – 02 02/20
Standard Channels
Type 1: FRP ST STC 40X40 Type 2: FRP ST STC 40X25
Slotted Channels (Holes: 25mmx9.5mm)
Type 1: FRP ST SLC 40x40 Type 2: FRP ST SLC 40x25
Note: Slots – (25x10)x 50 mm on center
STRUT SYSTEMS
Strut Channels
FRP COMPOSITES / STRUT CA – 03 03/20
Back-to-Back Channels
Type 1: FRP ST BBC 40x80 Type 2: FRP ST BBC 40x50
Punched Channels
Type 1: FRP ST PUC 40x40 Type 2: FRP ST PUC 40x25
STRUT SYSTEMS
Strut Channels
FRP COMPOSITES / STRUT CA – 04 04/20
Strut Embedment Channels
In certain applications, it is necessary to embed a corrosion resistant channel into a new pouring of concrete. For these applications, strut concrete embedment channel is used. Strut embedment channel is available in two material types: polyester and vinyl ester. The polyester and vinyl ester embedment channel is a two piece bonded type design. The embedment channel utilizes two continuous protruding flanges in the profile base to retain the channel in the concrete. Mounting the embedment channel flush with the concrete surface is a convenient way to secure piping, conduits or electrical enclosures to a wall or ceiling.
Type 1: FRP ST HC 40x40 Type 2: FRP ST HC 40x25
STRUT SYSTEMS
Channel Fittings
FRP COMPOSITES / STRUT CA – 05 05/20
Strut channel fittings are easily attached to strut channels with nuts and fasteners. The fittings are in two types: fabricated (cut from flat stock) or molded. Fabricated fittings are made from either polyester or vinyl ester material. All molded fittings with the exception of the post bases are molded in polyurethane. Post bases are in polypropylene.
Connector Plates
FRP ST CP S2 002 FRP ST CP S3 003 FRP ST CP S4 004
FRP ST CP S5 005 FRP ST CP A3 003 FRP ST CP A4 004
STRUT SYSTEMS
Channel Fittings
FRP COMPOSITES / STRUT CA – 06 06/20
FRP ST CP T4 004 FRP ST CP P3 003 FRP ST CP P4 004
FRP ST CP C5 005 FRP ST CP P6 006 FRP ST CP H3 003
FRP ST CP H4 004 FRP ST CP H5 005 FRP ST CP SE 002
STRUT SYSTEMS
Channel Fittings
FRP COMPOSITES / STRUT CA – 07 07/20
FRP ST CP H6 006 FRP ST CP O7 007 FRP ST CP L4 004
FRP ST CP J4 004 FRP ST CP Z3 003 FRP ST CP L4 202
FRP ST CP L2 002 FRP ST CP HA 003 FRP ST J4 010
STRUT SYSTEMS
Channel Fittings
FRP COMPOSITES / STRUT CA – 08 08/20
FRP ST J4 020 FRP ST J4 030
FRP ST U4 010 FRP ST UA 010 FRP ST UA 020
WINDOW CLAMP
FRP ST WC 001
STRUT SYSTEMS
Strut Post Base
FRP COMPOSITES / STRUT CA – 09 09/20
STANDARD POST BASE
FRP ST PB 001
SINGLE POST BASE
FRP ST PBS 001
DOUBLE POST BASE
FRP ST PBD 001
STRUT SYSTEMS
Heavy Duty Post Base
FRP COMPOSITES / STRUT CA – 10 10/20
HEAVY DUTY POST BASE
FRP ST PB 001 HA
HEAVY DUTY POST BASE
FRP ST PBS 001 HB
STRUT SYSTEMS
Beam Clamps
C – Clamps
FRP COMPOSITES / STRUT CA – 11 11/20
Catalogue number Thickness
(mm)
FRP ST BCL 006 6
FRP ST BCL 010 10
FRP ST BCL 014 14
Single C – Clamps M 10, 14
Double C – Clamps M 10, 14
HEAVY DUTY CHANNEL NUTS
M 8, 10, 12, 14 ,16, 18, 20
STANDARD DUTY CHANNEL NUTS
M 8, 10, 12, 14
FRP ST SCC 010 FRP ST SCC 014
FRP ST DCC 010 FRP ST DCC 014
STRUT SYSTEMS
Pipe Clamps
FRP COMPOSITES / STRUT CA – 12 12/20
Two-Hole Pipe Straps
Strut Two Hole Pipe Straps are designed for use in securing pipe, conduit and ducts to strut channel. Two hole fiberglass straps can also be used independently from the channel for surface mounting. The two hole pipe straps are manufactured from a fire retardant, glass reinforced polyester resin. For extreme chemical environments, the straps can be manufactured from vinyl ester resin.
Catalogue number A
(mm) B
(mm) Bolt size
(mm) Strap size WxT (mm)
FRP ST PC 020 22 122 14 40x6
FRP ST PC 025 28 128 14 40x6
FRP ST PC 035 34 136 14 40x6
FRP ST PC 045 48 150 14 40x6
FRP ST PC 060 62 162 14 40x6
FRP ST PC 075 74 174 14 40x6
FRP ST PC 090 90 190 14 40x6
FRP ST PC 100 100 200 14 40x6
FRP ST PC 115 115 215 14 40x6
FRP ST PC 140 140 242 14 40x6
FRP ST PC 170 170 270 14 40x6
FRP ST PC 220 220 320 14 40x6
FRP ST PC 275 275 400 16 40x6
FRP ST PC 325 325 425 16 40x6
FRP ST PC 355 355 455 16 40x10
FRP ST PC 400 400 500 16 40x10
FRP ST PC 450 450 550 16 40x10
FRP ST PC 500 500 600 16 40x10
FRP ST PC 560 560 660 16 40x10
FRP ST PC 630 630 730 16 40x10
STRUT SYSTEMS
Pipe Clamps
FRP COMPOSITES / STRUT CA – 13 13/20
Rigid Pipe Clamps
Catalogue number Nominal Pipe Size
(mm)
FRP ST RPC 015 15
FRP ST RPC 020 20
FRP ST RPC 025 25
FRP ST RPC 032 32
FRP ST RPC 040 40
FRP ST RPC 050 50
FRP ST RPC 065 65
FRP ST RPC 080 80
FRP ST RPC 090 90
FRP ST RPC 100 100
FRP ST RPC 150 150
FRP ST RPC 200 200
U – Bolts
Catalogue number Nominal Pipe Size
(mm)
A (mm)
B (mm)
C (mm)
D (mm)
TL (mm)
FRP ST UB 015 15 24 10 40 62 34
FRP ST UB 020 20 28 10 42 66 34
FRP ST UB 025 25 34 10 45 72 34
FRP ST UB 032 32 42 10 49 80 34
FRP ST UB 040 40 50 10 53 88 34
FRP ST UB 050 50 62 14 63 108 40
FRP ST UB 065 65 76 14 70 122 40
FRP ST UB 080 80 92 14 78 138 40
FRP ST UB 090 90 104 14 84 150 40
FRP ST UB 100 100 116 14 90 162 40
FRP ST UB 150 150 176 16 146 250 82
NOT RECOMMENDED for Vertical Installation
Without Additional Supports
STRUT SYSTEMS
Strut Channel Fasteners
FRP COMPOSITES / STRUT CA – 14 14/20
FLAT WASHERS
Ø 8, 10, 12, 14 ,16, 18, 20
Thickness: 3 mm
SQUARE HEAD BOLTS
M10
HEX BOLTS M10
M16
HEX FLANGE BOLTS M 8 M16
STRUT SYSTEMS
Pipe Hangers
FRP COMPOSITES / STRUT CA – 15 15/20
Catalogue number A
(mm) B
(mm) C
(mm) T
(mm) W
(mm)
Hanger Rod
(mm) Trans Rod
(mm)
FRP ST UB 015 38 70 48 4 38 14 10
FRP ST UB 020 50 90 60 4 38 14 10
FRP ST UB 025 68 120 78 4 50 14 10
FRP ST UB 032 82 140 92 4 50 14 10
FRP ST UB 040 98 180 108 4 50 16 10
FRP ST UB 050 130 215 142 6 50 16 10
FRP ST UB 065 180 275 192 6 75 16 10
FRP ST UB 080 235 355 250 8 75 16 10
FRP ST UB 090 290 455 305 8 100 16 14
FRP ST UB 100 340 550 355 8 125 16 14
FRP ST UB 150 400 620 420 8 125 20 14
FRP ST UB 080 450 690 490 10 150 20 20
FRP ST UB 090 500 800 540 10 150 20 20
FRP ST UB 100 560 900 610 13 150 20 20
FRP ST UB 150 630 1040 730 13 150 20 20
Rod Couplers
Catalogue number M
(mm) a (*)
(mm)
FRP ST RCPL 10 10 50
FRP ST RCPL 14 14 50
FRP ST RCPL 16 16 50
FRP ST RCPL 20 20 50
FRP ST RCPL 24 24 50
Notes: (*) other dimensions available upon request. (**)Minimum thread engagement must be 20 mm per side.
STRUT SYSTEMS
Saddle Clips
FRP COMPOSITES / STRUT CA – 16 16/20
Saddle Clips make fastening through strut channel much easier. The clips mate with the exterior of the channel flanges and are secured with threaded rods and nuts.
SADDLE CLIPS
FRP ST SCL 010 FRP ST SCL 014 FRP ST SCL 016 FRP ST SCL 020
Hole: Ø10, Ø14, Ø16, Ø20
TRAPEZE SUPPORT SYSTEMS
STRUT SYSTEMS
Wall Brackets
FRP COMPOSITES / STRUT CA – 17 17/20
The wall brackets are available in a wide variety of sizes and configurations. They are specifically designed to meet the customers requirements. They are ideal for customizing the support of piping, cables, tubing, conduits or cable trays. These brackets are available in either polyester or vinyl ester resin types and will work with all the accessory items.
Tray Width mm
A mm
B mm
150 275 250
225 350 300
300 430 330
450 580 400
600 730 480
750 880 550
900 1040 630
STRUT SYSTEMS
Support Systems
FRP COMPOSITES / STRUT CA – 18 18/20
PIPE SUPPORT RACK
STRUT SYSTEMS
Support Systems
FRP COMPOSITES / STRUT CA – 19 19/20
Typical Hanging Support System
STRUT SYSTEMS
FRP COMPOSITES / STRUT CA – 20 20/20
SOUTHERN ELECTRICAL EQUIPMENT COMPANY
40 - Street 11 - TruongTho Ward - ThuDuc District - HoChiMinh City – Vietnam
(84.8) 3897 8933
www.emn.com.vn
www.emncomposite.com.vn
ISO 9001:2008