FRANKE BOW SINGLE BOWL - digitalassets.reecegroup.com.au
4
FRANKE BOW SINGLE BOWL INSET/UNDERMOUNT/FLUSHMOUNT SINK - BXX 210-36 To see the complete FRANKE range go to www.reece.com.au/bathrooms SPECIFICATIONS Recommended use Domestic Material Stainless steel Formation Welded Tap Holes N/A Dimensions 400 x 450 mm Bowl Size 360 x 410 x 200 mm/28 L Cut Out Template Cabinet Size 450 mm Waste Outlet 90 mm Features Waste to rear, sound deadening pads, bowl insulation, fast fix installation system Accessories Included accessories: Please refer to website for more information Models available BXX 210-50 BXX 220-36/36 BXX 210-68 CLEANING RECOMMENDATIONS We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage caused by any improper treatment is not covered by the product warranty - refer to Warranty Conditions. Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Published 22/09/2021 FEATURES Model BXX 210-36 Bowl configuration Single bowl Bowl(s) Stainless steel with cr=12 mm corners and rear waste Finish Stainless steel Fixing Fixing clips Colours N/A 400 360 450 410 page 1 of 4
Transcript of FRANKE BOW SINGLE BOWL - digitalassets.reecegroup.com.au
FRANKEBOW SINGLE BOWL INSET/UNDERMOUNT/FLUSHMOUNT SINK - BXX 210-36
To see the complete FRANKE range go to www.reece.com.au/bathrooms
SPECIFICATIONSRecommended use Domestic
Material Stainless steel
Formation Welded
Tap Holes N/A
Dimensions 400 x 450 mm
Bowl Size 360 x 410 x 200 mm/28 L
Cut Out Template
Cabinet Size 450 mm
Waste Outlet 90 mm
Features Waste to rear, sound deadening pads, bowl insulation, fast fix installation system
Accessories Included accessories: Please refer to website for more information
Models available BXX 210-50BXX 220-36/36BXX 210-68
CLEANING RECOMMENDATIONSWe recommend the use of soapy water or approved cleaners.This product should not be cleaned with abrasive materials.Damage caused by any improper treatment is not covered by the product warranty - refer to Warranty Conditions.
Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor takes no responsibility for printing errors. Published 22/09/2021
FEATURESModel BXX 210-36
Bowl configuration Single bowl
Bowl(s) Stainless steel with cr=12 mm corners and rear waste
Finish Stainless steel
Fixing Fixing clips
Colours N/A
400
36045
0
410
page 1 of 4
FRANKEBOW SINGLE BOWL INSET/UNDERMOUNT/FLUSHMOUNT SINK - BXX 210-36
INSTALLATION INSTRUCTIONS - INSET
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
page 2 of 4
FRANKEBOW SINGLE BOWL INSET/UNDERMOUNT/FLUSHMOUNT SINK - BXX 210-36
INSTALLATION INSTRUCTIONS - UNDERMOUNT
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
A B
A A
A
ø 35
40
15
A
20
A
1 432
A
[mm]
[mm]
Sil
ico
n
O.K.
1
2
Franke Sunshine
ChlorChlorine
(Cl)
page 3 of 4
FRANKEBOW SINGLE BOWL INSET/UNDERMOUNT/FLUSHMOUNT SINK - BXX 210-36
INSTALLATION INSTRUCTIONS - FLUSHMOUNT
Plumbers, please ensure a copy of the installation instructions is left with the end user for future reference
1 3 642
O.K.
1 35
64 2
7 8
5
21
A
1
A
2
3
Silico
nSili
con
A
Franke Sunshine
ChlorChlorine
(Cl)
page 4 of 4
