The Roman Villa at Blacksmith’s Corner, Walberton, West Sussex
Forming Machines Foldable Information. FORGE Related Terms Anvil Blacksmith’s Hammer Ferrous...
-
Upload
samuel-kennedy -
Category
Documents
-
view
214 -
download
1
Transcript of Forming Machines Foldable Information. FORGE Related Terms Anvil Blacksmith’s Hammer Ferrous...
Forming MachinesFoldable Information
FORGE
Related Terms
Anvil Blacksmith’s Hammer Ferrous Metals
FORGE
Uses
Used to heat up ferrous metal to a red hot temperature.
The metal can then be shaped using the anvil and blacksmith’s hammers.
FORGE
Safety Rules
Always make sure the lid is open before lighting.
Stay away from opening when lighting.
Always shut the gas and air off when shutting down the forge.
Be aware of where the hot metal is at all times.
CRUCIBLE FURNACE
Related Terms
Non-ferrous metals
Ingots
Oil Bonded Sand Casting
CRUCIBLE FURNACE
Use
Used to melt non-ferrous metal that will be cast into a mold.
CRUCIBLE FURNACE
Safety Rules Always have the lid open when lighting.
Always keep any moisture away from the molten metal.
Only instructor may fill the furnace or pour the molten metal.
Turn off the gas and the air when shutting down the furnace.
RING ROLLER
Related Terms
Sheet metal (slip rolls)
Round or square bar (ring roller)
RING ROLLER
Uses
Used to roll metal into a cylinder, cone or ring.
RING ROLLER
Safety Rules
Keep fingers away from moving parts.
Do not overload the machines with to thick of a material.
Increase amount of curve over several passes.