Fiber Inbuilding Distribution System

7/31/2019 Fiber Inbuilding Distribution System

1/33

Fiber Inbuilding DistributionFiber Inbuilding Distribution SSystemystem

SHENZHEN WINHAP COMMUNICATIONS INC.

http://www.winhap.com/


2/33

11 FIDS SummaryFIDS Summary

FIDS System & FeaturesFIDS System & Features22

FIDS IntroductionFIDS Introduction33

44 FIDS NMS and OMT SystemFIDS NMS and OMT System

55 FIDS Case StudyFIDS Case Study


3/33

Summar

-

solution for IBS coverage.

Usin Fiber O tical Transmission technical and multi Low RFoutput distribute RUs which provide flexibility for deployment.

Support Multi band and Multi operators.


4/33

n n

11

FIDS SummaryFIDS Summary



44FIDS NMS and OMT SystemFIDS NMS and OMT System



5/33

FIDS system is contributed with: MU (Master unit) EU (Expansion unit)

RU (Remote unit)

MU (Master unit)MU (Master unit)

EU( Expansion unit)EU( Expansion unit)

RU( Remote unit)RU( Remote unit)


6/33

E&OE&O distributiondistributionterminalterminal

Remote PS Unit RPSRemote PS Unit RPS

Optical Power Composite CableOptical Power Composite Cable


7/33

1 MU support 8 EU

1 EU support 8 RU or 8 EU

Using 2 core fiber as transmission Remote power supply optional for RUs

m ax mum ransm s ance e ween , anRUs

upport mu t stan ar an s nc u ng:GSM, DCS, WCDMA, CDMA, etc.


8/33

Content




4FIDS NMS and OMTFIDS NMS and OMTSystemSystem



9/33

Functions: Downlink E/O (electric to optic) transformation

p n op c o e ec r c rans orma on RF input Power detection

RF Gain Control Remote query and control each EUs & RUs by OMT Remote query and control each EUs & RUs by NMS 110/220 VAC

MU (Master unit)MU (Master unit)


10/33

unc ons: Uplink signal O/E, E/O transformation

Downlink E/O, O/E transformation Provide Remote Power Supply Channel Expand network structure:

1 MU su ort 8 RU network mode:1*81 MU support 8 EU,1 EU support 8 RU(network mode:1*8*8)1 MU support 8 EU,1 EU expand 8 EU,1 EU support 8 RU(network

* * *

OMT interface 110/220VAC

EU( Expansion unit)EU( Expansion unit)


11/33

Functions: Uplink signal E/O transformation

Uplink & Downlink band selective in each frequency

DL output power detection

Uplink &Downlink attenuation setup (ATT. value=15), 48VDC or Remote Power Supply Unit supported nter ace prov e query an contro unct ons or

RU (Remote unit)RU (Remote unit)


12/33

Functions: Provide Local ower su l for EU

Provide the Remote power supply for RU

110/220VAC

Remote Power Supply UnitRemote Power Supply Unit


13/33

Functions: Give the Remote Power su l to EU Separate the mix signal from Optical Power CompositeCable Optical branch 1:8 DC output

E&O DistributionE&O DistributionTerminalTerminal


14/33

Functions: Transmission the E&O signal between EU and RU 4 core fiber cable 48VDC

Feeder Optic Fiber length can reach 277m

Optical Power Composite CableOptical Power Composite Cable


15/33

Schematic Dia ram

GSM, DCS, WCDMA & CDMA 4 Bands Schematic Diagram


16/33

Network To olo

Structure 1:


17/33

Network To olo

Structure 2:


18/33

Network To olo

Structure 3:


19/33

Content



3 FIDS IntroductionFIDS Introduction

FIDS NMS and OMT SystemFIDS NMS and OMT System4



20/33

, .

B/S user ends.

s ng nternet rowser as c ent.

Software upgrading only at server.

Resource tree management function. Support multi-transmit protocol, such as Modem SMS,

NMS SMS, TCP/IP, etc.


21/33


22/33


23/33

POWER OFF ALARM POWER FAIL ALARM

BATTERY ALARM FIBER SEND/REC FAILLINK ALARM

FIBER SEND POWER FIBER RECEIVE POWER

UL ATTENUATIONDL ATTENUATION

UL ALC LIMIT DL ALC LIMIT

UL ALC Switch DL ALC SWITCH

DEVICE MODE DEVICE SERIAL NO

SOFT VERSION


24/33

POWER OFF ALARM POWER FAIL ALARMBATTERY ALARM FIBER SEND/REC FAIL

LINK ALARM

FIBER SEND POWER FIBER RECEIVE POWERDEVICE MODE DEVICE SERIAL NO

SOFT VERSION


25/33

FIBER FAIL ALARM PA OVER TEMPERATURE

UL OUTPUT OVER POWER

FIBER SEND POWER FIBER RECEIVE POWER

UL ALC LIMIT DL ALC LIMIT

w tc

RF SWITCH DL PA SWITCH

SOFT VERSION


26/33

on en




4

FIDS NMS and OMT SystemFIDS NMS and OMT System



27/33

Shangsha community is a urban village.


28/33

Building area:386,000

1100 Building(total area:1,150,000 More than 100,000 subscribers.


29/33

Closer building Existing blind coverage


30/33


31/33


32/33

Material Quantit Remarks

Antenna 500

MU 7 G/D/W

EU 28 G/D/W

RU 260 G/D/W

Remote Power Supply Unit 28

Outside Fiber Terminal Box 60

Outdoor Fiber Junction Box 28

18 core Composite Cable 8000

RF Composite Cable 16000


33/33

2011/4 updated

Fiber Inbuilding Distribution System

Documents

Transcript of Fiber Inbuilding Distribution System