Experience The Advantage

Sales • Service • Rental

5 LocationsSt. Louis

4190 Hoff meister Avenue • St. Louis, MO 63125 314-544-1214

800-542-1214 Fax 314-544-1656

Jeff erson City3100 South Ten Mile Dr. • Jeff erson City, MO 65109

573-893-8786

800-345-9154 Fax 573-893-8737

Jackson4788 Old Cape Road East • Jackson, MO 63755

573-204-0100

800-599-9854 Fax 573-204-0411

Wentzville115 Resource Drive • Wentzville, MO 63385

636-327-8877

888-999-6883 Fax 636-327-4944

Troy7651 East Resource Drive • Troy, Illinois 62294

618-288-3400

888-315-1100 Fax 618-288-3410

HoursMonday Thru Friday 7 AM - 5 PM

Saturday 8 AM - 12 PM

Volume 38

Prices Subject To Change Without Notice

Table of ContentsSite Layout Tools 2 - 4

Flatwork Supplies 5 - 10

Masonry Supplies 10 - 11

Foundation Supplies 12 - 14

Waterproofing Supplies 15

Caulks & Adhesives 16

Chemicals & Grouts 16 - 18

Work Wear 19

Job Site Security 20

Safety Supplies 20 - 23

Rental Rate Sheet Insert

Job Site Supplies 23 - 24

Carpentry Tools 25 - 26

Hand Tools & Equipment 27 - 28

Fastening Tools 29 - 30

Iron Workers Tools 30

Power Tools & Equipment 31 - 38

Drywall Tools 39

Landscaping Tools 40

Vehicle Outfi tting & Jobsite Storage 41 - 42

Ladders & Scaff olding 43

Seasonal and nu ITEMS 44

Experience The

Advantage

CHECKAUTHORIZATION BY

PREST STD

U.S. POSTAGE

PAID

Permit No. 5584

St. Louis, MO

Nu Way always appreciates your business and occasionally we make mistakes and errors/omissions. In the event of this they will be posted in our stores and on our website.

Return Address

Nu Way4190 Hoffmeister Ave.St. Louis, MO 63125

Jobsite Safety

Tool and Equipment Rental

Paving and Flatwork Supplies

Commercial Construction Residential Construction

Hand and Power Tools

pp. 27-38

pp. 25-26

Insert

pp. 30-38

pp. 5-10pp. 20-23

2 Visit Us At nuwayinc.com

Prices Good Through September 30, 2016 or While Supplies Last • Prices Subject To Change Without Notice

SITE LAYOUT AND MEASURING TOOLS

Inverted Tip Solvent Based Marking Paint

Stripe Water Based Traffic Marker

As Low As

$2$29595When You Buy 72 Or More

20958 20 Fluid Ounces

As Low As


20631 17 Fluid Ounces

As Low As


20649 Dark Handicap Blue

• Solvent based and VOC compliant• High solids for greater coverage• Available in red/orange• Water based formula available in red, pink, black, green,

blue, white, clear and safety purple

• Water Based and VOC compliant• Traffi c ready in 60 minutes• One can will stripe 250 linear feet

20782 White traffi c “extra” marker for asphalt striping $10.2520786 Yellow traffi c “extra”marker for asphalt striping $10.25Z605 Stripe marking gun $31.75Z606 33” Stripe marking wand $34.50Z604 Stripe marking machine $140.00

Rulers And Tapes

$1350 066FN

• Marked both sides, both edges• Graduated to 1/16ths both edges• 16” stud centers marked in red

• Graduated in feet, 1/10ths and 1/100ths of feet• Regular outisde markings in feet, inches, and 1/16ths• Decimal points on engineer’s scale prevent reading errors

L100 (45100) 3/8” X 100’ hi-viz® orange long steel tape $21.00FE100 1/2” X 100’ hi-viz® fi berglass tape $16.5045068 3/8” X 50’ hi-viz universal long steel tape $14.25

6’ X 5/8” Wood Rule Red End®

6’ Red End Engineer’s Ruler

$18251066DN (45376)

• Graduated to 1/16ths of an inch• 16” stud centers in red, regular outside markings• Marked both sides and both edges

6’ Red End With 6” Slide Rule Extension

$1850X46 (45062)

• Tape Line Stands Out Up to 9’• Toggle Lock Positioned for Convenient Operation• Removable Belt Clip

1” X 33’ Hi-Viz Power Return Tape

$1775P2410CME

Transits And Levels

• 1/4” accuracy at 100’, 200’ working range• Dust protected eyepiece with fi xed cross hairs• Includes: tripod, rod, case and allen wrench

17-620A Pocket sighting level $21.0017-624 6” Round eye level with external bubble $53.0017-630 5X magnifying eye level $126.25

20X Transit Level Kit

$46900 54-200K

• Circular Dome for Fast Setup With Compensated Instruments and Lasers

• Plumb Bob Hook

5/8 X 11 Dome Head Aluminum Tripod

$1190060ALQCI40-0

Tripods

60-ALQCI21-B 1/2” x 20 Ext. Leg Alum. Tripod w/quick clamp $129.0060-ALQCI120-BPL 5/8” - 11 Ext. Leg Aluminum Tripod -Best Value $75.50

Accessories

11-498 8 Ounce brass plumb bob $22.2511-550 12 Ounce brass plumb bob $24.2511-552 16 Ounce brass plumb bob $26.5011-553 18 Ounce brass plumb bob $29.2011-554 24 Ounce brass plumb bob $36.7511-554A 32 Ounce brass plumb bob $37.0011-555B Brass plumb bob point $3.5011-729 12’ Gammon reel with power return $20.0011-431 Plastic plumb bob target $2.25

Lath Stakes

Pine And Hardwood Lath Stakes Available In Sizes 24”, 36” And 48”

Quantity Breaks Available

• 1/4” accuracy at 75’, 200’ working range • Dust protected eyepiece with fi xed cross hairs for

accuracy• Includes: Tripod, rod, case, and allen wrench

20X Level Kit

Clear Inverted Tip Marking Paint - Solvent Based

$33900 54-190K

1300024 24” Pine wood lath stakes - 100 per bundle $29.951300024H 24” Hardwood wood lath stakes - 30 per bundle $24.001300036 36” Pine wood lath stakes - 50 per bundle $29.001300036H 36” Hardwood wood lath stakes - 30 per bundle $32.501300048 48” Pine wood lath stakes - 50 per bundle $36.001300048H 48” Hardwood wood lath stakes - 30 per bundle $40.95WHP24 24” Poplar Smooth Wood Lath Stakes 100 Per Bdl. $37.50WHP36 36” Poplar Smooth Wood Lath Stakes 100 Per Bdl. $51.00WHP48 48” Poplar Smooth Wood Lath Stakes 100 Per Bdl. $73.50

Black Fine Point Marker

$129 48-22-3100

Telescoping Fiberglass Leveling Rods

$21500 98010 25’ Tenths SVR Surveyor’s Series

• Sections retract for compactness• Universal tip fi tting for attaching accessories• Carrying case

98020 25’ eighths fi berglass leveling rod $189.95920041 16’ Tenths (CR series) fi berglass siterod $110.00920042 16’ Eighths (CR series) fi berglass siterod $115.00

• Clog Resistant Marker Tip• Writes through Dusty, Wet and Oily Surfaces • Durable Marker Tip for Writing on Concrete,

OSB and Rough Surfaces• Ink Dries in Seconds

41078 78” R BEAM Type 300 level $225.00

37416 16” Heavy Duty Type 96 Level $61.00

$2550FE200/FE200D

• 1/2” x 200’• Hi-Viz® Orange Case• Yellow Clad Fiberglass Blade Impervious to Moisture

Tech/Electronic IP65 Level With Case

R Beam Type 300 Level

7’-12’ Type 106T Plate Level - Extends 7’ to 12’

Pocket Pro Level and 27’ Tape Measure

$2590036524 24”

$1095541048 48”

$3907535712

$155511927 Reg. $34.25

• 5 mode reading (degrees in 1 or 2 decimal points, percent, feet & inches in decimal, feet and inches in fractions, and mm/m

• 2 screen visibility with no loss of frame strength

• 3 Straight edges• Locked Vial System - never needs adjustment• One Horizontal (level) and two Vertical

(plumb) vials• Vials are guaranteed for life

• 3 Straight edges• Locked Vial System - never needs adjustment• One Horizontal (level) and two Vertical

(plumb) vials• Vials are guaranteed for life

• Pocket Pro Level small and easy to wear on belt• Pocket Pro Level designed for quick level check• Pocket Pro Tape Measure with grit resistant coating• Pocket Pro Tape Measure with scale on both sides

$3050036548 48”

Carrying Cases Available

$30500

Framing Levels And Plate Levels

48” Box Frame Level

$14225 37448

• Removable endcaps for scribing in corners• Rubber endcaps grip walls and do not leave marks• Crystal clear vials readable in any direction

Jamber Level Set

• Crystal clear vials readable in any direction• Inlcudes: 72” and 32” level• Level and plumb the jamb and

header at once

$24400 37532

8

ber Level Set

Closeout

3St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100


Masons Twine

$45014902161 #18 X 250’

• Braided nylon mason line• Colors available

• Extra long 130 ft heavy duty cord and pull ring• Holds 1 lb. of chalk for less refi lls

WT275 #18 X 275’ white twisted nylon $2.75WT545 #18 X 545’ white twisted nylon $5.00OB1000 #18 X 1000’ orange braided $14.55

$3485 G130

• Formulated to achieve a perfect line every time• Brilliant color oxides added to assure constant color

tones for strong sharp lines• Available in blue, red, white, and yellow

$175 8B 8 OZ. BLUE

OTRS18300 300’ Fiberglass tape with 3X high speed rewind $33.50OTR10100 100’ Ultra-glass premium fi berglass tape $25.50OTR1810100 100’ Ultra-glass premium fi berglass tape $27.50OTR1810200 200’ Ultra-glass premium fi berglass tape $60.50OTR1810300 300’ Ultra-glass premium fi berglass tape $77.00

Chalk Line Reels

G100 100’ Little giant chalk line reel $19.95P100 100’ Pro line chalk line reel $8.50

• Brilliant weather-proof color.• Water-resistant lines hold your mark.• 12–15 strikes usual line yield.

$2025103BD 3 LB.

Ultimate

Blue

Chalk/Dye

Marking Chalk

105B 5 Lb. Blue ultra fi ne marking chalk $7.858GO 8 Oz. Ultra fi ne marking chalk $2.75105GO 5 Lb. Glo-orange ultra fi ne chalk $14.255BD 5 Oz. Ultimate blue chalk/dye $3.75105R 5 Lb. Red ultra fi ne marking chalk $7.85

• Graduations are 1/8ths, inches, and feet• Tough ABS reel• Designed for the do-it-yourselfer

200’ Fiberglass Tape Measure

$2675 OTRS18200

Tape Measures

$690043-747

• Clamps to (2x4) dimensional lumber for hands free leveling• 180 rotating vial to duplicate angles• Bridged center dial for continuous marking surface

Bostitch 48” Clamping Box Beam Level

33-428 7.5M/25’ x 1” Powerlock® tape rule $22.4533-835 35’ X 1” Powerlock® tape rule $22.55

$268533-725

• 11’ blade standout• 16” and 19.2” stud center markings simplify

framing jobs• BladeArmor™ coating on the fi rst 4-1/2”

25’ x 1-1/4” FATMAX® Tape Rule

$252534-130

• 4 to 1 gear drive for fast rewind• Stainless steel blade for long life• Tru-Zero end hook for inside and outside

measurements

100’ X 3/8” FATMAX® Long Tape Rule

$1475 47-487L

• Rewinds 5x faster – has a 5:1 gear ratio• Die-cast aluminum housing• 4 oz. waterproof red FatMax® Xtreme™ chalk

Fatmax® Xtreme™ Chalk Reel With

Red Fatmax® Xtreme™ Chalk Kit

$875 42-465

• Durable heavy-duty cast aluminum frame• Ideal for pipe and conduit work• Magnetic strip allows hands-free operation on metal

surfaces

9” Torpedo Level

• 100’ Polyester line rewinds 3-1/2 times faster• Free wheeling disengage gear for ease of use• Quick fi ll rubber grommet

$695 GB1

Chalk Reels

MeasuringWheels

$87547-099

• Durable, heavy-duty die cast body for extra long life• Long wearing felt gasket hugs line and distributes uniform chalk

coating• Can be used as plumb bob

100’ Contractor Grade Chalk Line Reel

$305533-735

• 11’ tape standout• 1-1/4” wide blade for easy readability• BladeArmor™ coating on the fi rst 6”

maximizes durability of hook end

35’ X 1-1/4” FATMAX® Tape Rule

$855 1932872

$1525 1932877

$19000 68900

$11000 68920

$975 14900031, 14900032, 14900039, 14900042

• Wide door for quick and easy chalk fi ll• Abrasion-resistant poly line provides 5-6 strikes per pull• 1:1 Gear ratio rewinds line

• Durable aluminum housing• 100’ Hi-tensile line is stronger for fewer breaks and for

use on rough, abrasive surfaces• Easy Fill & Lock Top

• Measures to 9999 feet• Measures in Ft/10ths • Piston grip mounted counter controls

• Measures to 9999 feet• Measures in Ft/10ths • Tri-Fold handle with pistol grip

• Patented reel handle allows you to change spools easily• Handle made of durable polyethylene• Quality #18 Braided or Twisted nylon line• Tensile strength of 165 lbs.• Orange, Pink, Yellow, and Green

100’ Aluminum Chalk Reel

100’ Mach6 Chalk Reel

DW-PRO 12.5” Measuring Wheel With Carry Case

DW-500 6” Measuring Wheel

Mason/Construction Line Reels

$855 1932874

• Wide door for quick and easy chalk fi ll• 100’ Abrasion-resistant poly line provides 5-6 strikes

per pull• 3:1 Gear ratio rewinds line 3X faster

Speed-Line Chalk Reel

$3150 1932879• 20 oz. Chalk capacity for fewer refi lls• Large sliding door for easy chalk fi ll • 2:1 Gear ratio, rewinds 2x faster• Heavy-duty braided line resists fraying and

breaking

150’ LayoutPro XL

• The strongest housing (stainless steel!) on the market• Metal-reinforced crank handle for durability• Housing reinforced with rivets for superior strength

300’ Perma Clad Nylon-Coated Steel Long Tape

$18025 SNR18300

Long Tapes

RR182 Dual wheel, 1 ft. circumference., 9,999 Ft limit $46.75MP301 3 Ft. circumference., 99,999 Ft limit - best seller $101.25

$1955 33-530

$955 33-425

• 8’ standout• BladeArmor™ coating on the fi rst 6”• Entire blade coated with Mylar® polyester fi lm• 10% smaller than PowerLock® Classic Tapes

• 7’ standout• Chrome high-impact ABS case is job site tough• Entire blade coated with Mylar® polyester fi lm• 16” and 19.2” stud center markings simplify framing

jobs

30’ Powerlock® Tape Rule With Blade Armor™ Coating

25’ x 1” PowerLock® Tape Rule

s fastere of use

8 standout• BladeArmor™ c• Entire blade co• 10% smaller t

• 7’ stan• Chrom• Entire• 16” an

jobs

™ Chalk Kit

d distributes uniform chalk

orkfree operation on metal

Measuring Wheels

$7175 RRT6

• Units: feet and inches• Compact fold-down — easily reduces to 1/2 its size• 5-digit, easy-read, magnifi ed counter that measures 9,999 feet

$9225 RRT12• Units: feet and inches• Compact fold-down — easily reduces to 1/2 its size• 5-digit, easy-read, magnifi ed counter that measures

9,999 feet

$16000 MP401

• 5-digit counter. Up to 99,999 feet.• Rugged 3/4” steel tubing • Compact fold-down—easily reduces to 1/2 its size for

storage and portability.

ly




Flagging

Surveyors Flags

Price Per Bundle Of 100 Pcs.

Construction Lasers

$69500LL100N-2

• Fully automatic self-leveling rotating laser• 1150 ft Diameter with 1/8” accuracy• 3 Year limited with instant exchange

$89500 LL300N-4

$120000 LL300S-27

• Self-leveling rotating laser with manual slope mode• 1650 ft Diameter range with 3/32” accuracy• 5 Year “Knock-over” warranty!

• Self-leveling rotating laser with manual slope mode• 2600 ft Diameter range with 1/16” accuracy

• 5 Year “Knock-over” warranty!

Complete Laser “System” In A Case

Includes: Laser, receiver, tripod, grade rod...All in 1 Case!

Includes: Laser, HL450 receiver and case

Includes: Laser, HL760 receiver, tripod and case

Includes: Laser, HL700 receiver and case

Includes: Laser, CR600 machine/rod receiver and case

Medium Range, High Accuracy Laser

Medium Range, High Accuracy Laser

The Original and Still the Best Professional Laser

Automatic Self Leveling Laser Level

DG813 Pipe Laser

$139500 LL400HV

$210000 LR50W-MM

• 2600 ft Working range with </=1/16” accuracy• 5 Year “Knock-over” warranty!• Includes HL760 receiver

Machine Mount Laser Receiver Kit

$304995 UL633-24

$419900 DG813

$15000 HR220

$39500 LT52

$59500 LT56

$119500 DET-2

• Dual Grade, Horizontal, Vertical, Interior and Pipe Laying Laser• Total control for any application• Plane-Lok, Automatic Grade Match and Axis Alignment• Includes: Two HL750 Laserometers and a SF601 Spot Finder

Universal Laser - The most versatile laser ever!

HR220 Laser Receiver

LT52 Point & Line Laser

5 Beam Point and Line Laser

DET-2 Construction Theodolite

Construction Calculators

$59954225

• Material cost & quantity estimations• Concrete areas & volumes• Includes: User’s guide, protective case, and long

life battery

$6995 4065

• Works in and converts between all building dimensional formats

• Solves right angles, including rafters, rake-walls, slopes and square-ups

• Calculates footing volume, blocks, roof area

4080 Trig plus III calculator $79.955022 Armadillo gear calculator hard case $14.95

Concrete Calc

Construction Master Pro

$799544080

• Work in and convert between any building dimension• Roof, rafter and framing solutions• Two years laserguard use-and-abuse warranty

Desktop Construction Master Pro

$8495 6135

• 91 Built-in scales - 50 imperial/41 metric• Customize scales for plans that are reduced/enlarged• Perform instant linear, rectangular area and volume takeoff s

Scale Master II Digital Plan Measuring System

$4495 8025

• Convert more than 60 imperial & metric units• Easily calculate linear, area and volume measurements• Meets federal highway metrication requirements

• Constructed with a fi berglass handle and forged steel head

• Ideal for demolition of concrete, tile, and drywall

• Patented head to handle connection has a reinforced steel pin for improved safety

Ultra Measure Master Metric Conversion Calculator

Sledge Hammers

Wood Handles11969 4 Lb. Hammer with 16” wood handle $12.501197400 6 Lb. Hammer with 30” wood handle $20.251197900 8 Lb. Hammer with 36” wood handle $21.251120300 10 Lb. Hammer with 36” wood handle $23.951121900 12 Lb. Hammer with 36” wood handle $27.501123400 16 Lb. Hammer with 36” wood handle $34.501124400 20 Lb. Hammer with 36” wood handle $41.25

Fiberglass Handles1197000 4 Lb. Hammer with 16” Fiberpro handle $15.251197600 6 Lb. Hammer with 33.5” Fiberpro handle $21.251198800 8 Lb. Hammer with 33.5” Fiberpro handle $25.001199300 10 Lb. Hammer with 33.5” Fiberpro handle $28.751199600 12 Lb. Hammer with 34” Fiberpro handle $33.001199800 16 Lb. Hammer with 34” Fiberpro handle $37.50

LL300N-2 Includes: HL450 Receiver, C45 adapter, 2161 Tripod and GR151 Rod (15’) $995.00

• “Mistake Proof” compensated self-leveling system• 1600 ft. Working range with </=1/16” accuracy• 5 Year warranty!• Includes Patented HL700 “Digital Readout” receiver

As Low As

$125 EACHWhen You Buy 36 Or More 150001 Orange Fluorescent

As Low As

$800 EACHWhen You Buy 10 Or More 150SFS21FO Orange Fluorescent

$122900 LL500

• allows work indoors or outdoors up to 250 ft and works in all horizontal and vertical applications

• Magnetically attaches on ceilings or metal studs• Waterproof and dustproof to IP67 standards and also

withstands a drop of up to 5 feet to a hard surface.

• Versatile tool does multiple jobs - set it up once and work plumb, level and square in the whole area

• Automatic self-leveling• Combines 5 beam pointer and crossline laser• 3 Year instant exchange warranty

• Automatic self-leveling and plumb• Fast, one person 90° layout of rooms, walls, tile,

carpet squares and fi xtures• Dust, water and shock-resistant

• Horizontal & Vertical Compensation for highest level of accuracy

• Simple & Intuitive 6-button Keypad• NiMH and Alkaline Battery Packs included• Dual LCD with large characters• Programmable settings for the horizontal angle resolution,

90 degree angle beep, vertical degrees or %, and more.• 2” angular accuracy - accurate enough for any construction

job

o

ser

Digirod Rodless Grade Checking Tool• Automatic cut/fi ll calculations• Accuracy of 1/16”• Works with all brand rotating lasers

$69500 DR400

LR50W Laser Receiver and RD20 Wireless

Remote Display

Soapstone,

Markers and

Lumber Crayons

Additional

Colors Available:

BlueFluorescent PinkRedGreenWhiteYellow

15015900GOG 6” Glo Orange Stake Whiskers $.15 Each

Additional Colors AvailableBlack Red Yellow WhiteGreen Blue Pink

3111000 4-lb Safe Lock Fiberglass Handle Sledge Hammer $25.003112000 6-lb Safe Lock Fiberglass Handle Sledge Hammer $35.003113000 8-lb Safe Lock Fiberglass Handle Sledge Hammer $38.003115000 10-lb Safe Lock Fiberglass Handle Sledge Hammer $45.003116000 12-lb Safe Lock Fiberglass Handle Sledge Hammer $50.003117000 16-lb Safe Lock Fiberglass Handle Sledge Hammer $55.00

• Self levelling range of -12% to +40% over the entire grade range

• Bright visible beam that works up to 500ft• IP68 protection (dust and waterproof )• Includes: Laser, Remote and Spot Finder

er

0ft

WhenSafetyMatters

SAFE-LOCK™

Steel-anchored for

maximum security

and head retention

5St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

FLAT WORK SUPPLIES

Gator Glide Hand Floats

White Cementand Marble Dust

48” BullFloat Kit

Rugasol S Surface Retarder

• Gator GlideTM Leveling Head• Light-Weight Bull Float Blade• (4) 6’(ft) Snap Button Poles• Heavy Duty Carrying Case

• Architectural quality appearance with original color and texture of the aggregate

• No danger of acid residue from strong washing compounds

• Easy to apply

GF10802 16” X 3” hand fl oat with square edge $26.25GF10805 16” X 4” hand fl oat with square edge $27.50GF10807 16” X 3” hand fl oat with round ends $30.25

Gator Glide Hand Edgers

GF10833 4” X 8” hand edger 1/4” radius $26.25GF10834 4” X 8” hand edger 3/8” radius $26.25GF10835 4” X 8” hand edger 1/2” radius $26.25

Gator Glide Hand Groovers

GF10815 4” X 8” hand groover 1/2” deep bit $24.00GF10816 4” X 8” hand groover 3/4” deep bit $24.00GF10817 4” X 8” hand groover 1” deep bit $24.00

Spee-D Channel Drains

Dura Slope Trench Drain System

• Ideal for commercial and residential applications from patios to light vehicular traffi c areas

• Flanges on the bottom of the channel ease installation by providing a lip for anchoring

• Extruded channel may be cut to any length and solvent welds together like PVC pipe

400 4’ X 4” Gray channel drain, base only, no grate $28.25400-10 10’ X 4” Gray channel drain, base only, no grate $70.75

430 Pop-up drain emitter with 4” elbow and corrugated pipe adapter $23.25

2371 “Tee” for 4” channel drain w/gray grate $38.952381 90° Elbow for 4” channel drain w/ grate $31.25248 Connector for 4” channel drain, gray $4.95247 Closing end cap for 4” channel drain $5.00241 2’ X 4” Gray channel grate only $17.502404 24” X 24” PVC catch basin with 4 outlets $348.502410 12” Universal outlet adapter $33.002415 Galvanized steel grate for #2404 basin $645.50234 3” & 4” Bottom outlet/strainer $28.25

STEGMEIER CORPORATIONPoured In Place “Cantilever Forms”

• foam forms that attach to the tile on gunite pools and secured with double face tape and tie wires.

• Set up time is minimal (usually the morning of the pour) and they may be removed early while the concrete is still wet enough to “slick fi nish” with a foam profi le edging tool.

• The tie wires are positioned approximately 14” apart with 2” break back

Frontier Desert Deck, when mixed with white marble sand and white cement, and applied to freshly poured concrete produces a durable attractive finish that is ideal for pool decks, patios and other walkways.• Coverage: 1 unit = 250/300 square feet• 8 units per carton• Twelve colors plus white available. • Lite Sand Buff, Regular Sand Buff, Dark Sand Buff,

Dove Grey, and Lite Dove Grey in stock

Double wall bonded P.V.C. drain system which remains straighter while concrete is being poured. The .100 thousandths thick top cap is half-lapped and runs continuously across fittings and short sections of base to keep straight lines.

The snug fit top cap can easily be removed at cleaning time or be replaced when damaged due to ultraviolet sun rays.

Provides the necessary crack control, but not so deep as to interfere with steel placement. In addition to control, it adds a beautiful finished look.

It is cost effectively, durable, and easy to install. With the “T” member ears embedded in concrete, surface water seepage is kept from subsoil.

Deck Drain

Deck Joint

Frontier Desert Deck

13994W Type 1 white portland cement 94 lb. $25.50139100 Marble dust - white 100 lb. bag - pool mix $17.25

$27500 GF10305

$5975 91072 5 Gallon

HeadBlade

olesase

Cast In Place Replaceable Tactile Pavers

2436IDPAV2BR 2’ x 3’ Cast In Place ADA Panel Brick Red $107.502448IDPAV2BR 2’ x 4’ Cast In Place ADA Panel Brick Red $143.50

2436IDRET2BR 2’x3’ Surface Applied ADA Panel Brick Red W/Adhesive & Anchors $105.50

2448IDRET2BR 2’x4’ Surface Applied ADA Panel Brick Red W/Adhesive & Anchors $140.50

2436NV8REPBR 2’x3’ “REPLACEABLE” Cast In Place ADA Panel Brick Red $85.50

2448NV8REPBR 2’x4’ “REPLACEABLE” Cast In Place ADA Panel Brick Red $113.50

Quantity Discounts and Other Colors Available

• For use in new curb ramps or new construction• Pressed into place in freshly poured concrete• Plastic sheeting protection covers entire surface of

Cast-In-Place Tile• Standard sizes: 24” x 36”, 24” x 48”, 24” x 60”, 36” x 48”

and 36” x 60”

Manufactured from HDPE, this

trench drain offers a durable

alternative to concrete channel

that will save time and reduce

cost at installation.

• Interlocking tongue and groove joints for secure alignment and easy installation

• Duraloc intergral joint lock to prevent joint movement• No extra screws or clamps needed at installation• Lightweight sections for easier handling and lowered freight costs• Blank grate inserts eliminate need for plywood• Sloped and Non-sloped sections with bottom outlets offers

system versatility• Various grate options, up to Class D traffic rating

Vapor Barrier And Vapor Retarder Wrap

13703300 14’ X 140’ 15mil vapor barrier for underslab $358.0013707160 14’ X 210’ class a 10mil vapor retarder for underslab $329.00149TAPE 4” X 180’ Stego tape $35.50


Stego Wrap 15 Mil Class A• A true below-slab vapor barrier• A multi-layer plastic extrusion manufactured with only the highest grade

of prime, virgin, polyolefi n resins.• Can be used in systems for the control of soil gases (radon, methane), soil

poisons (oil by-products) and sulfates.

• Chemical coating applied to the surface of unset concrete to retard surface mortar

• It is used for improving the appearance of ornamental work, roadways, driveways, sidewalks, plaza areas and steps

• Top Etch is a water-based, top-surface retarder for producing exposed aggregate concrete fl atwork. Top Etch is available in two strengths: regular (blue) and deep (red).

• Ideal for cast-in-place fl atwork and the top surface of pre-cast concrete panels.

Stego Wrap 10 Mil Class C• 10-mil is used as an exceptional vapor retarder• A multi-layer plastic extrusion manufactured with only the highest grade

of prime, virgin, polyolefi n resins.• Can be used in systems for the control of soil gases (radon, methane), soil

poisons (oil by-products) and sulfates.

$43 Per LF Average Cost

6” x 4’0” Sections

$6900 139TS5 5 Gallon

$7500 140899 5 Gallon

Control Set Surface Retarder

Top Etch Deep Surface Retarder

$3.80 Per LF Average Cost

As Low As $0.75 Per LF

ColorsGrey, Tan and White

ColorsGrey, Tan and White

Beast™ Screed is a fixed-elevation, point-to-point guide screed system that allows you to maintain floor levelness during the screeding operation. Set it and forget it. This eliminates the need to frequently re-establish grade to ensure floor elevation has not changed during the screeding operation as is typical with traditional wet-screed methods.



Concrete Stamps

FM3125-B Ashlar cut slate $173.00FM100-B Rough cut ashlar $185.00FM700-B Random stone $208.00FM300 Cut stone - 12” x 12” tiles $194.00FM520 26” X 26” Edinburgh cobble $265.00FM-650 26” X 46” European fan $233.75FM-E2S1N 24” X 24” Ultra Flex Slate Texture Skin $70.00

A Variety Of Styles Available For Sale Or Rental

Tools And Accessories

Aluminum Chisels

Texture Rollers

Touch Up Wheels

Tampers

Color Hardener And Antique

Release Available Call For Pricing

Dowel Baskets

Red Oxide And Epoxy Coated Dowel Baskets For 6” And 8”

Slabs AvailableKeyway And Accessories

Large Selection Of Keyway And Accessories In Stock

Gullwing Style, Nail-on Style And Recess Keyway With Legs

Polyethylene Sheeting

Available In Clear, Black, Reinforced, Non-

reinforced And Flame Retardant.Rolls 100’ Long And 1 Mil To 10 Mil Thickness

Pallet Pricing AvailableWelded Wire Fabric

Nu Way Stocks Welded

Wire Fabric In 8’ X 15’

Sheets And 5’ X 150’ Rolls

Sizes In-stock4x4 4/4, 6x6 4/4, 6x6 6/6, 6x6

8/8, 6x6 10/10

And IDOT 6x12

Call For Delivery To Your Job

Galvanized and Epoxy Coated

Available - Call For Quote

Tie Wire And Bar Ties

Coil wire is available

in black annealed and

bonded plastic coated. Bar

ties are available in black

annealed and bonded

plastic coated. Sizes 4” to

12” long and bundles of

5000 pieces.

Now Available!6” ties in 500 pc. bundle.

134060-2 6” Plain loop bar ties (1000 pc bundle) $12.25Accessories

14800MT Wood handle economy bar tie twister $3.9514800ATHD Heavy duty ratchet bar tie twister $29.9527400 Klein metal tie wire reel $47.50

1020100C 10+ Mil 20’ x 100’ Clear Poly $105.00420200C 4+ Mil 20’ x 100’ Clear Poly $84.00620100C 6+ Mil 20’ x 100’ Clear Poly $63.00

Slab Bolster And High Chairs

Nu Way Stocks Slab Bolster And High Chairs(Continuous And Individual)

To Suit Any Job

Epoxy Coated Available

Call For Delivery To Your JobCall For Delivery To Your Job

Concrete Bricks

4” X 2-1/4” X 8” Bricks

1+ $ .47

300+ $ .43

600+ $ .39

FLAT WORK SUPPLIES

E-ETCH Environmentally friendly industrial strength fl oor cleaner, degreaser and light etching product 1 Gallon $28.00

FMLR-5 5 Gallon “clear” liquid release agent $120.00

171B1

$26925 701164 Blade Only

$24050 701153

$5850 16191

• 1-3/4” X 6’ aluminum snap handle• Fits bull fl oats, channel fl oats and

adjustable heads• Fits competitors heads and products

• Fits 1 3/8” and 1 3/4” push button handles• Universal mounting that fi ts any two or four

hole bull fl oat without adapter• Fits 1 3/8” and 1 3/4” push button handles

1.5” X 3.5” X 16’ Bumpcutter

2” X 4” X 10’ Highway Screed For Bumpcutter

QLT “Twister” Bull Float Bracket

702154 Male 1-3/4” threaded handle connector $ 6.9514973 Outriggers and braces $46.50

701156 2” X 4” Highway Screed for bumpcutter $306.25701161 1-1/2” x 3-1/2” x 10’ Highway Screed for bumpcutter $214.7514786 2” X 4” X 10’ Aluminum screed with plastic ends $108.2514788 2” X 4” X 12’ Aluminum screed with plastic ends $126.2514790 2” X 4” X 16’ Aluminum screed with plastic ends $158.00

Snap Handle

As Low As

$1995 EACHWhen You Buy 6 Or More

700524

Snap Handle

Speed Dowel - Patented Concrete Doweling SystemSpeed Dowel is the slip dowel installation system preferred by engineers and contractors alike. Speed Dowel provides a highly eff ective method for constructing superior quality construction joints in concrete fl atwork. Additionally, Speed Dowel cuts the time and labor of conventional slip dowel installation in half.

Speed Plate - A Patented Plate Dowel SystemSPEED PLATE™ is the economically smart choice for fl at plate dowel applications in construction joints. SPEED PLATE™ provides load transfer across construction joints and accommodates lateral and axial movement at inception due to concrete shrinkage and diff erential slab movement. The patented design reduces the number of dowels typically required with slip dowel systems and off ers many benefi ts to owners and installers.

PSD09/#5TL #5-3/4” X 9” Speed dowel sleeve $1.40PSD/#5BX #5-3/4” Speed dowel base $.38PSD09/#7TX #7-1” X 9” Speed dowel sleeve $1.50

As Low As

$1.28 EACHWhen You Buy 25 Or More PSD09/#4TS #4-5/8” X 9” Speed Dowel Sleeves

As Low As

$.32 EACHWhen You Buy 25 Or More PSD/#4BX #4-5/8” Speed Dowel Bases

As Low As

$3.00 EACHWhen You Buy 100 Or More 171SP01 1/4” x 4” x 6”Includes Sleeve and plate

Tinte D’AcquaWater-Based

Concrete Stain

$65001 Gallon

Create Unique decorative cementitious surfaces with Tinté D’Acqua™ deep penetrating, water based stains. Tinté D’Acqua’s™ permanent coloring solutions add life and luster to new and existing concrete fl oors, patios, driveways and vertical surfaces.

LegacyDecorative Concrete Systems

Multi-layer, high performance, plastic extrusion from prime grade virgin resin.

Stronger At Less Weight Per Roll

1-1/2” x 3-1/2” Shown on Page 7

7St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

FLAT WORK SUPPLIES

Aluminum Threaded Handle

CC224 1-3/4” X 4’ Magnesium handle $21.25CC670 1-1/4” X 6’ Aluminum handle $23.75CC294 EZY-Tilt II bull fl oat bracket chain style $58.75CC494 Broom bracket base only $3.95CC665 Fresno/broom bracket adapter $18.25

Finishing Brooms

• 3 Rows of black nylon bristles• Adapter included• Accepts standard broom threaded handles

CC256 36” Wood concrete fi nish broom $48.50CC259 Replacement handle adapter $6.25

• Medium-general purpose (black poly)• Lightweight

Aluminum Concrete Finishing Brooms

CC177 36” Aluminum fi nish broom $64.95CC178 48” Aluminum fi nish broom $84.50CC189 60” Aluminum fi nish broom $117.25

Groovers

Stainless Steel Edgers

CC320 24” X 8”, double end 3/4” bit, 3/8” radius $91.95CC322 24” X 8”, double end 1” bit, 1/4” radius $91.95CC324 24” X 8”, double end 1-1/2” bit, 1/4” radius $91.95

CF304 6” X 4-1/2”, 3/4” bit, 5/8” wide groove $34.50CF319 6” X 6”, 3/8” bit, 5/8” wide groove $45.75CF408 6” X 4-1/2”, 5/8” bit, 5/8” wide groove $33.50CF374 8” X 4-1/2” , 1” deep bit, 1/2” wide groove $54.75CC278-01 8” X 8” Walking groover,3/8” wide, 1” deep bit $68.25CC275-01 8” X 4-1/2” Walking groover 1/2” wide, 1” bit $51.00

CF138 6” X 6” 3/8” R Cement edger with wood handle SS $8.50CF141 6” X 3” 1/4” R Curved end edger with wood handle SS $7.75CF146 6” X 4” 1/2” R Outside curb & sidewalk tool SS $8.25CF152 6” X 4” 3/4” R Inside curb & sidewalk tool SS $8.25CF149 6” X 8” Edger/groover $20.50CF154 10” X 4” Highway edger 1”R 1-1/4”L with wood handle SS $9.25CF166 8” X 4” 1/2” R Cement edger with wood handle SS $8.50

“The Performer” Wood Concrete Finishing Brooms

Aluminum Airplane Groovers

Bronze Groovers

Ski Boards

$9975 14800SS 28.5” X 8”

• Lightweight and durable stainless steel

• Closed cell rubber pad• Completely washable

1480015 28.5” X 8” Aluminum ski board $89.25

20” Aluminum Smooth Mover

2” X 2” Footing Keyway Groover

One Man Screeds With Handle

Concrete Chutes

Heavy Duty Hand Screeds

Chute Tool and Form Shovel

48” Jitterbug w/ Diamond Mesh

$2550 CWT-9CT Chute Tool

$3120 1480012 Form Shovel

$9500 CWT37SJB48• 8” x 48”• All welded and double

reinforced construction• Ergonomic hand placement

$9900 CWT3KB• Rustproof and lightweight• Replaceable pads and handles• Completely washable

12” X 22” Aluminum Kneeboards

$4725 320MS36 36” WIDE

• 1” x 2” Rectangular tubing with welded end caps • 1-3/8” x 72” Hardwood handle • Great for leveling any fl at pour: basements,

sidewalks etc.

Made from our toughest alloy, these hand screeds all feature a FULL 1/8” wall thickness for superior strength and stiffness. Won’t dent like thin-walled ribbed screeds. Welded on end caps ensure your screed can’t fill with concrete.

$5445 320MS48 48” WIDE

As Low As

$1775 EACHWhen You Buy 6 Or More CC236 1-3/4” X 6

EACH

• Fits bull fl oat/fresno threaded brackets• Molded thread plugs in each end join

handles together

g

3 R f bl k l b i l2” X 2” Footing

over

$$$$4725320MS36 36”WID

Finishing Trowels

Aluminum Handles

$3775 MX20 20” X 4”

• High carbon spring steel blade• Blade cross ground to better hold its proper shape• Straight wood handle MXS20 20” X 4” with curved wood handle $37.50MXS56 12” X 3” with curved wood handle $28.00MX57 14” X 3” with straight wood handle $29.00MX64 14” X 4” with straight wood handle $29.25MX64D 14” X 4” with straight Durasoft handle $32.25MX66 16” X 4” with straight wood handle $32.25MXS66 16” X 4” with curved wood handle $32.25PB62D 12” X 4” Perma Shape broken-in Durasoft handle $32.75PB64D 14” X 4” Perma Shape broken-in Durasoft handle $35.50PB66D 16” X 4” Perma Shape broken-in Durasoft handle $38.75PB81D 18” X 4” Perma Shape broken-in Durasoft handle $41.50

Magnesium Floats

$12650 B48 48” X 8”

• Lightweight, long wearing, and properly balanced to provide the fi nish you want

• Square ends

$2400 11 8” X 3”• High carbon steel blade• Xtralite aluminum alloy mounting• Curved handle

Midget Trowel

$950 163B 6” X 6”

• Blue steel blade• Sturdy steel mounting• 1/2” radius, 5/8” lip

Edgers

Blue Steel Edger

162SSD 6” X 6” - 3/8” radius stainless steel edger $11.25

$3075 SP12SD 12” X 3½”

• Made from the highest grade spring steel• Curved DuraSoft® Handle• Made in the U.S.A.

Pool Trowels

SP14SD 14” X 4” pool trowel w/Durasoft handle $31.75SP16B 16” X 4½” blue steel Xtra-lite pool trowel $28.75SP16BD 16” X 4½” blue steel pool trowel with Durasoft handle $31.75SP815B 18” X 5” blue steel Xtra-lite pool trowel $31.25

$2450 143D 16” X 31⁄8”

• DuraSoft® Handle• Fully rounded ends that help prevent fl oat marks• Extruded from very hard, durable, lightweight magnesium

145M 16” X 3-1/8” magnesium fl oat $19.50145D 16” X 3-1/8” magnesium fl oat w/Durasoft handle $23.50145SH 16” X 3-1/8” magnesium fl oat w/foam handle $19.25146 20” X 3-1/8” magnesium fl oat $23.50146D 16” X 3-1/8” magnesium fl oat w/Durasoft handle $27.75

• Constructed of heavy gauge aluminum• Reinforced with cross braces and fl anged edges• Durable and lightweight

1710008 8’ Aluminum, fl ared end $199.001711200 12’ Aluminum, fl ared end $269.001711600 16’ Aluminum, fl ared end $375.001712000 20’ Aluminum, fl ared end $429.00

CWT-26HHS06 6’ x 1-1/2” x 3-1/2” Aluminum Screed $56.00CWT-26HHS08 8’ x 1-1/2” x 3-1/2” Aluminum Screed $72.00CWT-26HHS12 12’ x 1-1/2” x 3-1/2” Aluminum Screed $104.00

Made

In

USA

Concrete Chutesvy gauge aluminum

oss braces and fl anged edgesweight

Bracket

Included

Other SizesAvailable

$3650 CWT-8FKG

$2295 CWT120 20” X 4-1/2”

OCT072 1-3/4” X 6’ Octagon, Aluminum Snap-Button $22.7514259 1-3/4” X 6’ Aluminum Snap Handle $20.75

dles



FLAT WORK SUPPLIES

Concrete Saws

$159900 966563503

• 6” max capacity (rig mounted)• 3 speeds, 500/1400/2900 for optimum cutting.• Smartstart™ reduces rpm by 50% when starting holes.

$389900 965150206• 13 HP Honda engine• 18” blade capacity• 6-5/8” Cutting depth

FS 513 Self Propelled

$577500 965150213

• 20 HP Honda engine• 20” blade capacity• 7-5/8” Cutting depth

FS 520 Self Propelled

3 Speed Hand Held Core Drill With Case

Rental Rates (965150209)

Daily Weekly Monthly

$60 $250 $525

Rental Rates (FS 5000D)


$115 $405 $1015

542751359 14” Vari-Cut general purpose blade $99.55542774540 12” X .125 HI5 all purpose blade $302.50542774462 12” X.118 VH5 general purpose diamond blade $63.75542773481 14” X .125 QH5 general purpose blade $91.85542774541 14” X .125 HI5 all purpose blade $387.00542751128 14” X .125 GH10 Asphalt dry cutting asphalt blade $295.00542751036 18”X .125 1DP Blue 200B cured conc. Med-hard $524.50542755556 26” X .165 Millennium,cured concrete $841.50542773701 36” X .187 Millennium, cured concrete $1521.50

Diamond Blades

Core drills And Bits

542780101 7/8” Super premium diamond corebit, 5/8”-11arbor $92.00542780102 1” Super premium diamond corebit, 5/8”-11 arbor $92.50542780103 1-1/8” Super premium diamond corebit, 5/8”-11arbor $94.00542780106 1-1/2” Super premium diamond corebit, 5/8”-11arbor $109.00542780113 3” Super premium diamond corebit, 5/8”-11 arbor $182.00542780116 4” Super premium diamond corebit, 5/8”-11 arbor $241.50542780121 6” Super premium diamond corebit, 5/8”-11 arbor $365.00

3/4” To 12” Diamond Core Bits In Stock

Concrete Saws

Rental Rates (X150)


$75 $275 $600

Rental Rates (X450)


$175 $575 $1450

• 22 HP Kohler engine• Depth of Cut: 1-1/2” to 3”• Heavy duty use

Soff -Cut 4200

10” Soff -Cut 2000

• 9 HP Robin engine• Depth of Cut: 1.5” • Medium to heavy duty use

$10,12500 X2000

13.5” Soff -Cut 4000

• 20.5 HP Kohler engine• Max Depth of Cut: 2.75”• Electric blade depth control• Electronic key start

$11,65000 X4000

• 27 HP Kohler engine• Depth of Cut: 2” to 4”• Heavy duty, multi-purpose, highways, runways, and paving uses

Soff -Cut 5000 Paver

Ask About

Purchase Options

Ask About

Purchase Options

Ask AboutPurchase Options

Ask AboutPurchase Options

Cut-Off Machines

$139999 TS700-14

$219999 GS461

• 98.5CC engine• 4.6” depth capacity• Easy Start System

• 76.5 CC engine• Up to 15.7” cutting depth• Lightweight, compact and delivers excellent cutting

performance, handling and operator comfort.

14” Cutquik® Saw

GS 461 Rock Boss Concrete Cutter

$39999 42247101402 Cart only• Specially designed for the TS 400, TS 410, TS

420, TS 700 & TS 800• High-impact resistant wheels with sealed ball

bearings• Handle-mounted depth control lever• Automatic “return to idle” handle release

Cutquik® Cart

542757349 13.5” ZXL diamond blade $391.00

XL85000 8” X .100 Excel 5000 diamond blade (yellow) $205.55

XL65000 6” X .100 “Yellow” diamond blade (XL series) $105.55

XL55000AX50 5” X .095 “Yellow” diamond blade (XL series) $115.00

Quantity Discounts On Diamond Blades

FS 5000

• 47.6 HP Yanmar engine• 15” depth of cut• Capacity: 30” diamond blade (sold

separately• Compliant with Tier 4 EPA regulations FS 5000D

FS 7000 D

• 74.3 HP Deutz engine• 17.5” Depth of cut• Capacity” 36” diamond blade(sold

separately)• Compliant with Tier 4 EPA regulations

S

all

Saw, blade, cutting guide and water tank sold separately

utquik® Saw

$109999 TS420• 66.7 CC engine• 4.9” depth capacity• Able to be mounted on cart with

adapter kit

14” Cutquik® Saw

$127999 TS500I• 72.2CC engine• 4.9” depth capacity• Low emission engine

14” Cutquik® Saw with Electronic Fuel Injection

uses

• Longer life• Fastest cutting speed• Wide cutting range for hard and soft green

concrete

FLX and ZXL Soff -Cut Blades

ons

ns

5000D

p

Hummer Screed 2

$159500 MV2HH

• 4-stroke Honda engine

MVPR100H Power screed with 2 handles $1560.00

EHSK2 Cordless hummer 2 screed Without drill motor

$1200.00

LB104 4’ Screed bar for power screed 3 x 5 $312.00LB110 10’ Screed bar for power screed 3 x 5 $485.00LB112 12’ Screed bar for power screed 3 x 5 $539.00LB114 14’ Screed bar for power screed 3 x 5 $600.00

Ultra Light Screed Bars

SWB5 Sidewalk buddy without drill motor $545.00PR570 Finish trowel for sidewalk buddy $85.00PR590 Edger for sidewalk buddy $85.00

Side Walk Buddy

Call For

Info

$26000OWC50

• Honda GX50 engine• 4’ to 24’ roller tubes sold separately

Ideal ForPervious Concrete

RST04 4’ Roller tube $120.00RST14 14’ Roller tube $395.00

$255000 X150D• 4-1/2 HP Robin engine• A preset depth of cut• Three diff erent size guide wheels,

for 1/8”,1/4” and 1/2” saw joint

$235000 X150• 4-1/2 HP Robin engine• Depth of Cut: 1” to 1-3/16”• Light to medium duty use

6” “Decorative Concrete” Prowler Saw

The Prowler

Roller Screed Power Kit

Skid Plates Included

9St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

FLATWORK SUPPLIES

CREEP12 Street Creep Expansion Joint 12’ length $385.00CREEP20 Street Creep Expansion Joint 20’ length $660.00

Streamlined Steel Forms

• Available in sizes from 4” to 18” or higher• Self aligning forms• Applications: Edge forms, footers, industrial slabs, foundations, curbs and

gutters, and fl atwork

• Made In USA

The Only

Completely

Reinforced

Forms

Power Cutters

Rental Rates (K760 - Blade Not Included)


$50 $180 $425

• Suitable for: general concrete cutting, pile cutting, asphalt cutting and demolition work

• 14” blade capacity• 5” cutting depth• Blade sold separately

$119500 966477101

14” Power Cutter With Easy Start Engine

531101187 ELC45 14” diamond chain for K950 $756.80

542774541 14” X .125 X 1” HI5 all purpose diamond blade $199.95542750665 14” X .110 X 1” MS-5 combo masonry blade $242.50542751128 14” X .125 X 1” GH10 asphalt dry wet cutting blade $295.00

Call For Pricing 966037802

Concrete Chain Saw

• 6.5 HP motor• 14” bar length• 15” cutting depth• Chain sold separately

• New digital ignition system• 5” cutting depth• 5 hp engine• Blade sold separately

$93955 967181002

K760 II 14” Power Cutter

• 5 HP, 73 cc motor• Depth of cut per pass 2.5” with max cutting depth 16”• 9” twin blades• Includes: Blades

$158900 967195701

Cut-N-Break Concrete Saw

• General Purpose blade made for cutting cured concrete and brick

• Wet/Dry• 1”/20 mm arbor• Sold as 10 pack only

$29555 543716232

14” FLX Diamond Blade 10 PackAsk About Financing Options

• Suitable for: General concrete cutting, masonry work, and landscape work

• 14” blade capacity• 5” cutting depth• Blade sold separately

$79500 966799401

K3000 14” Electric Power Cutter w/ Wet Cutting Kit

Rental Rates (Blade Not Included)


$50 $175 $350

$296500 968424101

• 6.1 HP motor• 14” ring blade• 10” cutting capacity• Blade sold separately

Concrete Ring Saw

Rental Rates (Blade Not Included)


$200 $700 $1750

531108059 14” Cured ring blade ELR 45 series $298.50

576778501 9” Twin blades general purpose $389.30

Poly Forms

Approximately

60% Lighter Than

Steel Forms Poly Forms

869-450 4”X12’ Poly form w/end connections - straight $59.90869-620 6”X12’ Poly form w/end connections - fl exible $49.00869-650 6”X12’ Poly form - straight $68.70869-025 Metal slide pockets $8.75869-040 Metal twist pockets $7.50

QuantityBreaks

Available

cing

ork

1

Rubber Expansion

Joint

A seamless, extruded, EPDM (Ethylene Propylene Diene Monomer) rubber expansion joint. The rubber expansion joint is installed in new or existing concrete slabs including but not limited to roads, driveways, sidewalks and finished floors. The installation process requires limited tools and zero adhesives or sealants.

Protects adjoining structures and concrete slabs during extreme pressure caused by street creep. Maintains a seamless rubber seal while collapsing horizontally allowing approximately 3” of uncontrollable thermal expansion or slab movement. Provides vertical support and surface integrity while undergoing the 3” mechanical collapse.

Concrete Cutting And Grinding Wheels

24061 14” X 3/16” x 1” Green concrete/asphalt blade $21.0023463 14” X 1/8” x 1”/20mm(23464) Big Mac concrete blade $12.7523460 12” X 1/8” x 1”/20mm(23462) Big Mac concrete blade $8.2020087 7” X 1/4” x 5/8-11 T27 masonry concrete and stone $7.0020017 4” X 1/4” x 5/8 T27 masonry concrete and stone $3.2524050 14” X 3/32”x 1” Stud King Chop Saw Blade , Gen Purpose $10.5024051 14” X 3/32”x1” Iron Worker Chop Saw Blade, Fast Cut $9.5025040 6” X 3” Rubbing Brick with Handle 24 Grit $23.0025050 8” X 3-1/2” Rubbing Brick with Handle 24 Grit $32.25

Quantity Discounts Available

Made

In

USA

Ask about the “BLUE CRUSH” Multi Purpose Blade Only $199.00 Each

587261701

Ceramar Foam Expansion Joint• Provides an excellent joint fi ller and back-up material for use in either

horizontal or vertical applications• Compatible with all currently popular cold-applied sealants, caulks and

hot-pour joint sealing compounds.• It is lightweight and easy to cut or form in the fi eld without waste.

1381048120 1” X 48” x 120” foam expansion joint $123.001381055120 1” X 5-3/4” x 120” foam expansion joint $190.00/cf

3116100500 5 Gal White Pigmented Curing Compound WB $41.50

3116105500 55 Gal MODOT White Pigmented Curing Compound WB $251.50

Tiah® Curing And Sealing Compound

White Pigmented Concrete Curing Compound

• An acrylic polymer solution that dries to a transparent fi lm, which improves abrasion resistance of the concrete.

• Provides improved weather and stain resistance, combined with a dustproof sealer.

• Meets maximum VOC content limits of 700 g/L

• water-based, white-pigmented concrete curing compound• Ideal for application on exterior, horizontal surfaces, such as highways,

airports, and street and curb paving• VOC compliant … VOC content is <100 g/L

1390005 5 Gallon Tiah concrete sealer $154.25#164 Hot-Applied Polymeric Sealant

• Provides a positive seal during expansion and contraction of the joint and it will not lose bond in cold weather or fl ow in hot weather.

• Ideal for the large-scale sealing of transverse and longitudinal joints in Portland cement concrete pavements

• It is also used for the maintenance sealing of cracks and joints in concrete and asphalt concrete pavements, parking lots, etc.

14016455 55 Lb. Carton #164 polymeric sealing compound $66.00

1403405 55 Lb. Carton #3405 single component polymeric joint sealnt illinois approved $54.00

040103 4” X 10’ 3 Pocket form 12 gauge $53.32060103 6” X 10’ 3 Pocket form 12 gauge $63.36080103 8” X 10’ 3 Pocket form 12 gauge $94.62040107 4” X 10’ 7 Pocket fl exform with 1 lock clamp $72.0706010 6” X 10’ 7 Pocket fl exform with 1 lock clamp $82.76080107 8” X 10’ 7 Pocket fl exform with 1 lock clamp $111.7804050FF 4” X 5’ Filler form - slip on $23.4006010CFB 6” X 10’ Curb face form “B” straight $62.6706010CFJ 6” X 10’ Curb face form “J” $62.6734018NS ¾” X 18” Nail stake $3.1734024NS ¾” X 24” Nail stake $4.1878018NS 7/8” X 18” Nail stake $4.6378024NS 7/8” X 24” Nail stake $5.7434018FP ¾” X 18” Form pin $2.79

4”, 6”, 8”, 10” And 12” Forms In Stock

Call For Rental Rates

That’s

$29.55Per Blade!



MASONRY & TILE SUPPLIES

FLAT WORK SUPPLIES

400-0 ¼” X 4-7/8” cold chisel $3.50401-0 5⁄16” X 5¼” cold chisel $3.75405-0 ½” X 6-3/8” cold chisel $4.50406-0 5/8” X 6¾” cold chisel $4.75408-0 ¾” X 7-1/8” cold chisel $5.75413-0 7/8” X 7½” cold chisel $7.25417-0 1” X 7-7/8” cold chisel $8.75

Cold Chisel

441-0 ½” X 12” long cold chisel $6.25410-0 ¾” X 12” long cold chisel $8.25419-0 1” X 12” long cold chisel $11.25

Long Cold Chisel

Brick Set

434-0 2½” X 7” brick set $7.75435-0 3” X 7” brick set $8.50436-0 3½” X 7” brick set $9.00437-0 4” X 7” brick set $9.75439-0 5” X 7” brick set $12.25

Floor Chisel

471-0 2” X 10” floor chisel $10.50472-0 2½” X 10” floor chisel $11.75

• 1.2 HP motor• Max cutting depth 2.75”• Max cutting length 28.5”• Adjustable cutting head enables bevel cuts

between 22.5 and 45 degrees

$99900 966610701

• 24” ripping capacity - 18” tile on diagonal• 15 amp, 1.5 hp motor• 3-3/4” depth of cut allows for cutting of

V-cap and pavers

Heavy-Duty 10” Wet Tile Saw

TS 60 10” Tile Saw with Stand

• Accommodates materials up to a 8” x 8” x 16”.

• 15 amp, 3 hp motor• 14” blade• Diamond blade included

$71955 BBM307

Block Buster Electric Masonry Saw

Econ-O-Shim®

34 ¼” Black plastic horseshoe 1½” x 3½” (100/bag) $14.0036 1/16” Blue plastic horseshoe 1½” x 3½” (100/bag) $7.5038 1/8” Red plastic horseshoe 1½” x 3½” (100/bag) $9.75

Vers-A-Shim® Shim Strips And Vers-A-Packs

PC4414-SHEET ¼” X 4” x 4” black (9/pack) $9.00PC4416-SHEET 1/16” X 4” x 4” blue (9/pack) $2.25PC4418-SHEET 1/8” X 4” x 4” red (9/pack) $4.50SP46VS-2 2” Vers-a-pack 32 ea 1/16” x 4” x 6” shims/pack $9.50

• Compressive strength of 10 to 12,000 psi.

• Econ-O-Shims will not rust, rot, stain or leach• Color coded thicknesses

• For the precast / tilt-up industry• Compressive strength of 10 to 12,000 psi.• Convenient thicknesses, lengths and widths.

Poly Pro Steel-Reinforced Plastic Trowel Blade

Gold Pro® Blade For Ride On Trowels

• Blade life comparable to steel blades• Provides a hard, polished fi nish• Precisely-sized steel backing plate adds rigidity

and proper fl ex points

Starting at $73.50 Each

• Constructed from extra thick high-performance tool steel

• Field tested and proven to provide 25% to 50% longer life than most silver trowel blades

• Available in fi nish and combination-blade styles only


Blue XL® Blade

• MAXIMUM VALUE for walk-behind and ride-on power trowels• Proven record in delivering 15% to 25% longer life than

standard silver blades• Available in fi nish and combination-blade styles only


Original Silver Blade

• For use on walk-behind and ride-on power trowels• Silver-polished blade gives maximum fl ex to

ensure a smooth, chatter-free fi nish• Wagman’s heavy-duty construction makes it one

of the most consistent wearing and longest lasting blades available.


Diamond Blades

Buy 3 Or More For

$22900 Each

161291 12” Blade

• 1/20 MM Arbor • Wet or dry cutting • High speed or walk behind saw applications• Uniform Consistency In The Diamond

Segments Improves Cutting Speed, 65%

Improvement

Buy 3 Or More For

$33000 Each

161294 16” Blade

Buy 3 Or More For

$26500 Each

161293 14” Blade

Rental Rates

Daily $55

Weekly $195

Monthly $475

si.dths.

r trowelsannnn

y

dity yyyyyyyyyyyyyyyy

g

ows for cutting offfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff f

$89955 D24000

Burlap,Burlene,

And Cotton Blankets

13710100 10’ X 100’ Burlap 10 oz. $149.00137010100 10’ X 100’ Burlene 10 oz. $200.00137CUREMAT 5’ X 22’ IDOT white cotton curing mat $40.90137ULTRA 8’ x 200’ Ultra-cure Ncf Wet Cure Fabric Non-dot $250.00137ULTRADOT Ultra-cure Dot Ncf Wet Cure Fabric 8’ X 100’ $227.00

Call For Quantity Discounts

See Page 38 For Walk Behind and Ride-On Trowels

Aluminum Brick Hod

$6880 CWT5BH (1483003)

Aluminum Mortar Hod

$8600 CWT-4MH (1486061)

Large Assortment of Masonry

and Tile Blades Available

Barrel Mount Power

Sprayer

7560XL 7.5 gpm barrel mount sprayer $2239.00221075 PCPT push cart for Allen sprayer $889.00221056 TCPT tow cart for Allen sprayer $1275.00

• Sprayers are intended for spraying Form Release Agents, Water Based Concrete Sealants, & Concrete Curing Compounds

• 4 HP Honda GX120 engine• Spray gun with fan tip and 50’ hose

Economy Nail Stakes

17134018NS 3/4” X 18” Steel nail stake $2.3017134024NS 3/4” X 24” Steel nail stake $3.9517134030NS 3/4” X 30” Steel nail stake $4.2517134036NS 3/4” X 36” Steel nail stake $4.50


Barrel Not Included

Spray Up To 30% Solids

11St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

MASONRY SUPPLIES

Portable Masonry Saw

$269500 966006506 Stand Sold Separately

• 4.8 HP Honda engine• 5” max depth of cut• Patented sta-level blade guard• Blade included

14” Gas Powered Portasaw

$189500 966006502 Stand Sold Separately• 1-1/2 HP electric engine• 5” max depth of cut• Blade included

14” Electric Portasaw

Three Piece

Laminated

Levels

148012 12” Custom wood level $46.55148018 18” Custom wood level $57.55148024 24” Custom wood level $77.55148030 30” Custom wood level $80.55148036 36” Custom wood level $89.55148042 42” Custom wood level $108.55148048 48” Custom wood level $110.55

London Pattern

Brick Trowels

RO116-11 11” Narrow London pattern wood handle $31.50RO116-111/2 11½” Narrow London pattern wood handle $31.50RO116-12 12” Narrow London pattern wood handle $31.50RO116-13 13” Narrow London pattern wood handle $32.50RO316-11 11” Narrow London pattern leather handle $45.95RO316-111/2 11½” Narrow London pattern leather handle $45.95RO316-12 12” Narrow London pattern leather handle $45.95RO316-13 13” Narrow London pattern leather handle $47.50

• Meticulously hand crafted with a special tool steel

• Blades are forged and perfectly heat tempered

• The blade, ferrule and tang are bound as one piece

Brick Tongs, Handles 6-11 Bricks

“A” Series Concentrated Mortar Color

$1825 BC384

$2295 BL280

As Low As $1175Light Buff, Dark Buff, Tan, Deep Tan, Golden Brown, Brown, Red, Pink,

Deep Red, Light Chocolate, Dark Chocolate, and Iron Black

149LSB92508 Scaff old board 1-1/2” x 9-1/4” x 8’ $29.50149LSB92516 Scaff old board 1-1/2” x 9-1/4” x 16’ $56.25

• Longer spans and greater on center spacings save money• Durable for multiple reuse• Applications: slab forming, wall forming, and shoring members

Dovetail Anchor Slot• 22 gauge x 10’ long• Filled with polyurethane as it is

roll formed• The foam stops concrete grout

from entering the slot but still permits dovetail anchors to be easily installed

$675 Each13010DTS-22

Masonry Saw BladesLarge Assortment Of

Diamond Blades In Stock4” To 36”

A Size For Every Job

Tuck Pointing Blades 542774592 4” Tuck point DT5 general purpose $39.25542774593 4-1/2” Tuck point DT5 general purpose $45.25542774595 7” X .25 Tuck point DT5+ general purpose $69.75

U505M 5’ Masons panel $89.95U665E 6’6” Walkthrough panel $113.30U765AG 7’6” Mason walkthrough panel $172.75S25G 18” Screw jack with base plate $32.30F-8R 8” Stem type caster with foot lock $55.005HL 5’ Unibilt cross brace angle type $26.607HL 7’ Unibilt cross brace angle type $30.50

See Aluminum Scaffold Planks On Page 43

Call ForSales Or

Rental

Plaster/Mortar Mixers

$334900 WM90PH8• Capacity: 2-1/2 to 3-1/2 bags• 8 HP Honda engine• Manual dump action

9 CU. FT. POLY DRUM

Rental Rates (WM90PH8)


$50 $175 $445

$450000 EM120SMH11• Capacity: 3-1/2 to 4 bags• 11 HP Honda engine• Cast iron paddle arms

• Tag system includes Tag Holder (red for danger), Caution Restriction (yellow) and Ready for Use Scaff old Complete (green).

• Plastic tag holder slips over the stacking pin to alert all workers to a jobs status.

12 Cu. Ft. Steel Drum With Coupler

$286700 WM70PH8• Capacity: 1-1/2 to 2-1/2 bags• 8 HP Honda engine• Manual dump action

7 CU. FT. POLY DRUM

Rental Rates (WM70PH8)


$50 $175 $445

80 1/2 and 5/8 brick jointer $5.5081 3/4 and 7/8 brick jointer $5.5082 5/8 and 3/4 brick jointer $5.5083 3/8 and 1/2 brick jointer $5.50

Laminated Scaffold BoardsWL013 Vinyl grout bag with metal tip $5.50BC291 30” Folding mortar box stand $62.50

Quantity Breaks

Available

Quantity

Breaks

Available

Ring To Coupler

Adapter

H3LA-Mixer

$85.00

Ring To Coupler

Adapter

H3LA-Mixer

$85.00

Ring To Coupler

Adapter

H3LA-Mixer

$85.00

3 Pc. Scaffold Tag System

Proform® Soft Grip Brick TrowelBrick Trowel• Soft textured handle provides the

mason a comfortable fi rm grip. • Handle and blade well balanced for

less wrist and arm fatigue.

RO116-11SH 11” Narrow London pattern Proform® grip $36.25RO116-111/2SH 11½” Narrow London pattern $36.25RO116-12SH 12” Narrow London pattern Proform® grip $36.25RO116-13SH 13” Narrow London pattern Proform® grip $37.25

$975 148OIL 1 PINT

Raw Linseed Oil• Preserves, protects & beautifi es hardwood levels• Protects tools and equipment from rust

542761412 7” TSD-S mas/conc/stone/hard material blade $39.25542750665 14” X .110 MS-5 combo masonry blade $242.50542774809 14” X .125 MI5 masonry blade $319.00542775645 14” X .125 BHT3 hard concrete $259.25542750666 20” Banner Line MS Brick and Block blade $424.50

Tile Blades 542761270 10” Superlok GP wet cutting blade $72.25542761276 10” Superlok continuous rim diamond blade $105.00542761284 10” Vari-cut tile blade with continuous rim $94.00

15% Off On All Diamond Blades

As Low As

$765 EACHWhen You Buy 50 Or More

$26000 700318

Mortar Boxes

Hubbard Brick Jointer with 4 Blades

• 9 cu.ft.• 16 gauge steel• 11” deep x 25.5” x 70.5”

$12500 BL375

• 7.5 cu.ft.• 8” deep x 33” x 56”

• Comes with 1/2”, 5/8”, 3/4”, 7/8” blades• More knuckle clearance and long lasting

Poly

Mortar Box

8

MI5 Blade

Included

MI5 Blade

Included

Each

When You Buy 6 Or More

Available in 4 lb. bags



FOUNDATION SUPPLIES

Snap-In Place Windows

• Designed for ultimate ease of installation

• Automatically seals on installation

• Fits Competitors OpeningsTUFB0835 32 X 19.5” X 8” Full window buck $480.00TUFB0308 32 X 19.5 Insulated slider full fi n $93.50TUFBO409 4’0” X 4’0” insulated single slider full fi n $268.75TUFBO215 8” Drop hanger 8”/10” in wall window bucks $46.00TUFB0830 32 X 19.5 X 8” full 1 pc. Window in wall buck $435.00

Pricing For Forms, Ties And Window Bucks Available Upon Request

Chemical Sprayers

Delivery Available

9 FtForms

AvailableFor

Rental

• Call for sales or rental• Rental purchase options available• Form take off s off ered for all projects

Concrete Form RentalForm Layout For Commercial And Residential Jobs

621101 Rod tie cutter $27.95154060 6’ Tie cutting bar with chisel points $68.50SH100 Strap hinge for gates corner forms $1.64CFT8 8” Top spreader 25 per box $51.65

3/4” X 48” X 96” HDO Plywood 100/100 Density

Available For Gates Forms

Sprayer Accessories

The Way To SpraySince 1884

Nozzles Repair Kits Extensions

• Designed for both day-to-day cleaning and cleaning that has been delayed for awhile!

• Carbide blades for scraping heavy build-up

Form Scraping Tools

• Extruded from high quality polyethylene foam• Peel off Strip• Flexible - Will not break or crack when used around curves or columns• Lightweight - Approximately 10 times lighter than traditional expansion

joint products• Accepted and used daily by both commercial and residential contractors

1/2” x 8” x 50’ Poly Foam Pull Top Expansion Joint

ConcreteForms

• Steel frame plywood face• Matches other comparable forms• 3’, 4’, 5’, 6’, 8’ & 9’

Now Stocking Aluminum Forms

1-1/8” Plywood Forms, Gates, Aluminum And Custom Designed Forms Available For Commerical Or Residential Construction Large

Selection In-stock And Ready For DeliveryCall For Details

$7995 22360• NEW - 4-1/2” wide opening for easy fi lling and cleaning.• VITON equipped for maximum chemical resistance.• 42” heavy duty nylon reinforced hose to resist chemicals.

3 Gallon Poly Acid Sprayer

$8900 1449• “Standard” wand and “clamp on” spray handle• VITON™ o-rings and gaskets for maximum

resistance to chemical attack• “Funnel top”

3.5 Gallon Concrete Sprayer

$10500 6002• Develops up to 150 psi.• 84” reinforced hose• Sprays from any container 5-55 gallon

Trombone Sprayer GATES® Concrete Forming Systems

Accessories

BEST

VALUE

$4162 31420

$13575 22149

$6150 22230

• Funnel top design for no mess in mixing and cleaning• Adjustable nozzle • Tri-Poxy® metal

• Resistant to the most extreme chemicals and high concentrations of acetone, naphtha, xylene and toluene

• Dripless wand • Improved chemical resistant hose

• Acid and chemical resistant seals and gaskets• Auto/manual high pressure relief valve• Lock-off feature to prevent accidental discharge

2 Gallon Steel Lawn and Garden Sprayer

3 Gallon Dripless Xtreme Poly Concrete Sprayer

1 Gallon Industrial Acid Staining Sprayer

Efficient And AccurateDuraform Saves Time And Money

On Your Residential, Agricultural And Light Construction Applications

Duraform Is CompleteThere Are Not Parts To Lose

Duraform Is AccurateDuraform Is Versatile

Low Cost Per PourThere Are Panels In Use With Over 300 Pours To Their Credit

Call For Pricing And

Availability

Full Line Of Accessories And Ties In-stock And

Ready For Delivery To Your Jobsite

141000 3 HP form oil sprayer, 27 gallon w/100’ hose $1258.00

LARGE SELECTION OF FORM TIES AVAILABLE FOR SIMPLEX, SYMONS, GATES, ALUMINUM,

AND PLYWOOD FORM SYSTEMS

$11800 1954 (blue) or 1954R (red)• Available in blue and red for easy identifi cation

of chemicals on the job site• Tri-poxy® lined steel for triple protection against

corrosion, rust and damage from denting• Includes two sprayer tips• Now with Crush proof wand!

Nu Way 3.5 Gallon Pump Sprayer

61800 Pro Series Backpack Sprayer $78.51

As Low As $1050 Per Roll3”, 4”, 6” and 8” Available

13St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

Rebar Estimating and Rebar Estimating and Fabrication Available Fabrication Available

At All LocationsAt All LocationsJobsite Delivery Available

1-1/8” Forming Systems Accessories

TWC450 Top waler $9.50WB6 2 X 6 waler bracket - fi ts ez-lok forms $12.50WBW-4 4” Waler with wedge bracket $10.75OC250 Off set clip $3.50EC100 Corner clips - fi ts ez-lok forms $2.75ST100 1/2 Corner clip $1.75CC22 22.5 Degree outside corner clip, 1 pc. $9.25CC30 30 Degree outside corner clip, 1 pc. $9.25CC45 45 Degree outside corner clip, 1 pc. $8.00CC90 90 Degree outside corner clip, 1 pc. $9.50HC150 1-1/8” To 1-1/2” stacking clip $5.00HC112 1-1/8” To 1-1/8” stacking clip $5.30

FOUNDATION SUPPLIES

Tie-Breaker Tools

BT2 Break off tool for simplex/durform ties $10.00BT10 “Tiebreaker” heavy duty break off tool $24.95

Other Forming Accessories

RC6 Adjustable coil tie - use with 1/2” coil rod $3.00RH6 Rebar hook for up to #6 rebar $2.75FN450 4½” Foam nail with metal washer -100 per box $16.50FN550 5” Foam nail with metal washer -100 per box $18.50FN650 6½” Foam nail with metal washer - 50 per box $14.00

Quantity Breaks Available On Foam Nails

Replacement PlywoodCall Your Sales Representative

Today For Details On

Replacement Plywood For

Your Forms. We Can Also

Refurbish Your Forms For You.

Call Today For A Free Quote

2416SPFSB 2” X 4” x 16’ Standard and better spruce $6.90344896CDX 3/4” X 4’ x 8’ CDX yellow pine plywood $24.75149LSB92516 1-1/2” X 9-1/4” x 16’ Microlam boards $56.25

Plastic Bar Supports

Forming Lumber and Microlam Boards

Anchor Bolts

As Low As

13¢EACH

As Low As $915 EACH

NORTHROCK INDUSTRIESConcrete Vibrators

$48000 30BA1 PRO 1.5+ 13 AMP POWER UNIT • High strength cast aluminum housing• Rugged shock absorbing frame• Replacements for all other brands

30BA2 Pro 2+ 15 amp power unit $560.0030BA3 Pro 3+ 19 amp power unit $706.00

Call For Pricing On Vibrator Packages

Vibrator Heads And Shafts

30D1 1” X 12” Vibrator head $143.0030F15 1-1/2” X 14” Vibrator head $239.0030G17 1-3/4” X 14” Vibrator head $281.0030H2 2” X 14” Vibrator head $312.0030J25 2-1/2” X 14” Vibrator head $370.0030A2 2 ft Shaft for vibrator $84.0030A5 5 ft Shaft for vibrator $129.0030A7 7 ft Shaft for vibrator $165.0030A10 10 ft Shaft for vibrator $212.0030A14 14 ft Shaft for vibrator $277.0030A21 21 ft Shaft for vibrator $380.00 Tie Wire And Accessories Available

Re-Chargeable Battery Operated

Re-Bar Tying Tools

$212900 RB398• 5 times faster than manual tying• Lithium-Ion battery• Approx. 2,600 ties per charge• Ties from #3 X #3 to #5 X #6

Applications: Building foundations, precast concrete products, fl oors and walls, retaining walls, and swimming pools

$240000 RB655

• Make ties in approx. 1 second with consistent tie strength.• High speed tying saves you time and money.• Wire usage is regulated automatically.• Ties up to #9 x #8 rebar

Large Capacity Rebar Tool

Applications: Commercial building, road and bridge construction, foundations, precast plants, radiant heating tubes, electrical conduits

$230000 RB518• About 5 times faster than manual tying• One hand operation• Approx. 2,300 ties per charge• Ties from #5 X #5 to #8 X #7

Applications: Precast concrete products, building foundation, road and bridge construction, fl oors and walls, retaining walls, and swimming pools

Uses 16 Gauge

Tie Wire

Rental Rates (RB518)


$75 $275 $700



$65 $225 $565



$85 $300 $750

“Backpack” Vibrator

$145000 BP50

• Four stroke 2-1/2 HP Honda engine• 1 hour running time on one tank of gas• Can use 3/4” to 2-1/2” vibrator heads

3/8” X 6” To 1” X 36”

Plain and Galvanized Steel

Quantity Discounts Available

Custom Sizes Are Our Specialty

Placemennt Drawings

With Detailed Tags

Plain and Epoxy

CoatedRebar

1351212G 1/2” X 12” Galvanized anchor bolt with nut $77.75 per 100

1355812G 5/8” X 12” Galvanized anchor bolt with nut $131.65 per 100

1353418 3/4” X 18” Anchor bolt with nut $2.85 each

Available Sizes

1”, 1.5”, 2”, 2.5”, 3.5”, and 5”

Variouse Types of Lumber Available• 2 x 4 - up to 16’ (Spruce, Pine, Cedar and CCA Treated)• 1/2” and 3/4” Plywood (CDX, BB and HDO)• 7/16” x 12” x 16’ Smooth Lap siding• 1/8” and 3/16” 4’ x 8’ Tempered Masonite



FOUNDATION SUPPLIES

Insulated Vinyl Sliders For Steel Buck• Energy saving 3/4” insulated glass• Easy-to-remove exterior screen• Operating sash with lift-out feature for

easy cleaning

97029R 15 X 16 8” Galvanized steel frame $45.0097031R 15 X 20 8” Galvanized steel frame $47.5015168GW 15 X 16 8” White galvanized frame $58.0020158GW 15 X 20 8” White galvanized frame $60.0091054 15 X 16 Aluminum hopper insert $57.5091055 15 X 20 Aluminum hopper insert $59.0091604 15 X 16 Insulated slider insert $137.5097129R 8” X 16” x 8” Foundation vent $61.00

$12900 87201 15 X 16

$14000 87202 15 X 20

Window Bucks And Inserts

ME1608LH/RH 3068 8” Welded buck door frame $180.00ME1610LH/RH 3068 10” Welded buck door frame $205.00

Egress Systems And Window Wells

• Constructed to conform to Steel Door Institute Standard ANSI A250.8-1998 (SDI-100).

• Frames are provided with 9/32” DIA. silencer preparation

• Lightweight, easy to handle• Easily cut with a saw on jobsite • Seamless

6” To 60” Diameter12’ Lengths

Call For PricingCustom Cut To Length

Service Available

Finish Free Smooth Forms Available

Fibre Column Forms

GarBroLight Weight Round Gate

Concrete Bucket

• 30-50% Lighter than most standard steel buckets of same capacity

• Non-jamming double clamshell 16” diameter

427R 1 Cubic yard bucket $3615.00427SC Side chute for 1 cubic yard bucket $840.00454R 2 Cubic yard bucket $5250.00454SC Side chute for 2 cubic yard bucket $910.00

Prices Subject To Change Without Notice

Shown With Optional Side Chute

Chamfer Tube Edger

$3175 14816-34 For 16” form tube• Made of long wearing on piece bronze with

1” lip• Belt polished surface for clean smooth edges

14812-34 12” Radius edger $31.7514818-34 18” Radius edger $31.7514824-34 24” Radius edger $31.7514830-34 30” Radius edger $31.7514836-34 36” Radius edger $31.75

70067 15 x 20 8” Vinyl Buck w/Insulated Slider 3020 Premier $132.0070064 15 x 16 10” Vinyl Buck w/Insulated Slider 3020 Premier $155.0070070 15 x 20 10” Vinyl Buck w/Insulated Slider Premier $161.0070115B 4040 8” Double Glazed Egress Slider & Vinyl Frame $365.0070118B 4040 10” Double Glazed Egress Slider & Vinyl Frame $434.00

RJD INDUSTRIES, INC.

Advantages

• Superior architectural fi nishes, without patches or rust.

• Reduces formtie-related costs as much as 70%

• Reduced inventory - “One size fi ts all jobs”.Compatibility

The SuperTie Systems are compatible with all job built commercially available form systems.Basic Uses

The SuperTie Systems are appropriate for use in all forming applications, but is especially benefi cial in situations such as architectural fi nishes. It also reduces costs in battered wall and “odd sized” tie situations, since the rod is cut to the length required at the job site.

Fiberglass Reinforcing BarBenefi ts of fi berglass reinforcing bar:

• Corrosion resistance• Lightweight• Electromagnetic neutrality• Thermal insulator Applications:

• Tunneling/boring applications• Weight sensitive structures• Thermally sensitive applications• Reinforced concrete exposed to deicing salts• Applications subjected to corrosive agents• Applications requiring electromagnetic neutrality

FRPRBR420 #4 X 20’ fi berglass rebar with texture $39.95WaterstopsGreenstreak off ers a complete line of waterstop designs and material types to meet your specifi c need and application

• 2 Sizes of fiberglass rods - .308 And .50• 2 Sizes of grippers - 6000 lb. And 15,000 lb.

Call For Price Or Rental Rates

95707 49 X 36 x 60 Egress white steel window well $225.0096850 49 X 36 x 72 Egress white steel window well $265.00

AWLER371624W 37 X 16 x 24 Half round galvinized white window well $68.00

AWLER371630W 37 X 16 x 30 Half round galvinized white window well $92.00

87007 4040 Double glazed egress slider $204.0089161 49 X 36 Thermal hinge cover $332.0089265 55 X 48 Quarry view thermal cover $392.0095519 4 Rung egress white ladder $101.0097989R 4040 8” White steel egress frame $124.0098009R 4040 10” White steel egress frame $132.00

Door Bucks

Buck Sold Separately

Architectural Form LinersGreenstreak form liners are available in a variety of patterns and textures -- making it easy to add interesting detail into any structure without a lot of cost. Ideal for texturing tilt-up, cast-in-place and precast concrete

Wood And Rubber Chamfer

LA355 Chamfer cutter $22.951711210 1/2” X 12’ Wood chamfer strip $.18 PER LF

1713408 3/4” X 8’ Wood chamfer strip $.18 PER LF

1713412 3/4” X 12’ Wood chamfer strip $.18 PER LF

1711008 1” X 8’ Wood chamfer strip $.40 PER LF

1711012 1” X 12’ Wood chamfer strip $.41 PER LF

1711511 1-1/2” X 10’ Wood chamfer strip $.56 PER LF

1711513 1-1/2” X 12’ Wood chamfer strip $.59 PER LF

171612 3/4” X 10’ Rubber chamfer strip with tail $.68 PER LF

As Low As

12¢Per Foot When You Buy 5000 Or More Feet

Min-Max Thermometers

$1875 MIN/MAX

$3900 MIN/MAX-D

• Clearly shows min and max temperature in time period since last setting

• -40°F to +120°F: -40°C to +50°C +/- division accuracy, 1° div

• Digital Thermometer registers maximum and minimum temperatures in both Celsius and Fahrenheit scales

• +32º F to 122º F (2º div ) 0 to 50 ºC(1º div )

SC Seamless steel slump cone $42.00GTR Graduated tamping rod 5/8” x 24” - 6” scale $17.95SCB Aluminum slump cone base plate only $125.00SCOOP 1 Pc. Aluminum concrete scoop $22.75

Concrete Testing Supplies

We stock the following Waterstops

Mechanical, Hydrophilic and Mastic

Premier VCast In Place

Vinyl Buck and Sash Slider Unit

• Both sashes removable and fully weather stripped

• Great retro-fit window• Sloped sill• Brass rollers for smooth

operation• Unique tie slot mounting

system built into the window frame

15St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

40051 4” x 10’ Sewer & drain perforated pipe SDR35 $18.2540031 4” x 10’ Sewer & drain perforated pipe $7.50

WATERPROOFING & FOUNDATION SUPPLIES

• Commonly used in sandy soils• Single wall corrugated polyethylene pipe

with fi lter wrap• Cost eff ective and ecologically sound

alternative to gravel fi lled leach fi eld trenches

• 3” to 6” drain tubing available

• Plastic Culvert Pipe available in a variety of sizes

Drain Tubing And Culvert Pipe

1513102 3” X 100’ Perforated drain tubing with sock $67.991513100 3” X 100’ Solid drain tubing $45.991513100P 3” X 100’ Perforated drain tubing $40.991510024 18” Heavy duty sump lid $13.501511824 18” X 24” Sump well $30.951510233 2” X 3” x 3” Downspout adapter $3.851514100 4” X 100’ Solid drain tubing $57.991516100 6” X 100’ Solid drain tubing $150.99

10’ Drain Tubing Sections

151410 4” X 10’ Solid drain tubing $6.99151410P 4” X 10’ Perforated drain tubing $6.99

Plastic Culvert Pipe

Culvert pipe with max fl ow dual wall and bell end

1511220 12” X 20’ Plastic culvert pipe $135.001511820 18” X 20’ Plastic culvert pipe $255.501512420 24” X 20’ Plastic culvert pipe $360.00

Crack Repair Products

Sewer & Drain Perforated Pipe

CPR PRODUCTSComplete Crack Injection Repair Kit

Larger Sizes Available

“The Complete Foundation Crack Repair Kit” includes all the materials and tools you’ll need to epoxy inject a 3/64” x 10’ crack; along with a comprehensive instruction manual, data sheets and product MSDS. $13950 140CCRK

10’ Surface Seal KitA 100% solids, moisture insensitive, non-sag epoxy paste used primarily for sealing cracks prior to injection with #1001 injec-tion epoxy or #900 polyurethane resin. This FAST SETTING paste enables the user to inject within 30 minutes.

$4750 14010SSKIncludes: Surface Seal Paste, and surface mount injection ports.

10.5 oz. Epoxy Injection Kit

Carbon Weld Concrete Repair Kit

100% solids, moisture insensitive epoxy designed to perma-nently restore structural strength to cracked concrete. Unique wetting properties allow for maximum penetration into cracks above 0.005”

Carbon Weld straps come in packs of 8 linear feet (4 - 12” x 24” sheets). 35 stitch-bonded uni-directional carbon fabric is pro-duced from continuous tow carbon fi ber. Unique fi ber spreading techniques are utilized to obtain the correct UD fabric weight.

Includes: 4 sheets 1’ x 2’ carbon fi ber fabric, 30 oz. unit #400 bonding epoxy, safety glasses, disposable gloves, 4” roller pad and handle and roller pan.

$1875 140105IK

$11000140NCWK

Includes: Complete cartridge with bleed line, mixing container, 10 oz. high modulus, low viscosity, extended pot life injection epoxy

An Evolution In FootingConstruction, Drainage, And

Radon ReductionFeatures and Benefi tsDrainage is provided for both theinside and outside of foundationfooting

Reduces certain material and labor costs

Accommodates virtually any foun-dation layout

Conforms with EPA’s “Model Standards Techniques for Radon Control in New Residential Buildings.”

LN126 6” X 12’ Form-a-Drain lineal $16.50LN128 8” X 12’ Form-A-Drain lineal $19.25COUP6 6” Coupling $3.25COUP8 8” Coupling $4.95CN456 6” 45 Degree corner $7.50CN458 8” 45 Degree corner $8.50CN906 6” 90 Degree corner $4.75CN908 8” 90 Degree corner $5.75GS018 18” Grade stake price per box (100 pc) $75.25SS420 4” X 20” Spacer strap price per box (16 pc) $49.75SS424 4” X 24” Spacer strap price per box (16 pc) $51.95

Call For Complete List Of Parts And Pricing

Mel-Rol® Waterproofing System

• Flexible, versatile, dependable, roll-type waterproofi ng membrane• It is composed of a nominally 56 mil thick layer of polymeric

waterproofi ng membrane on a heavy-duty, 4 mil thick, cross-laminated polyethylene carrier fi lm.

• cost eff ective answer to properly waterproof foundations, vertical walls and below-grade fl oors in residential and commercial construction.

05110062 Mel-Rol waterproofi ng membrane self adhering, 38½” x 62’5” $189.00

015130129 29 Oz. Pointing mastic for Mel-Rol waterproofi ng membrane $9.75

015160005 5 Gallon Mel-Prime primer for Mel-Rol waterproofi ng membrane $175.00

016055009 9” X 50’ Roll detail strip for Mel-Rol waterproofi ng membrane $48.50

23751 Premium Elastomeric Pourable Driveway Crack Sealant $12.85

Liquid Applied Membrane Foundation Coating• Water based…may be applied to green or uncured concrete and to damp

surfaces.• Exceptional bonding…won’t delaminate from surfaces.• Non-toxic, non-fl ammable, non-hazardous…user and environmentally

friendly.

ELR005 5 Gallon Ecoline-R waterproofi ng membrane foundation coating $103.50

ELT001 1 Gallon Ecoline-T waterproofi ng mastic for tie holes and cracks $24.25

Non-Fibered Roof and Foundation Coating

$4100 63705 4.75 Gallon• Asphalt based coating• Penetrates, Preserves, & Protects Roofs, Foundations, Wood

Fences, Barns, & More• Use for Coating Entire Surface Area, Above or Below Grade

XSM2440 8’ X 65’6” Platon dimpled plastic waterproof membrane $210.00XSC0065 Platon Speedclip mounting clip 260 pcs. per box $94.50XSL0000 6’6” Platon moulding 10 pcs. per bundle $22.50

Waterproofi ng

System

• Easily bridges 1/4” cracks• Controls both interior and exterior moisture• Can be installed in all weather conditions

Expanded &Extruded Insulation

We Stock25 PSI 4’ X 8’ Sheets

1” - 1½” - 2” - 3” - 4” ThickUses: Foundation, Underslab, Plaza Deck, And Freezer Slab

Call For Pricing

104896 1” X 4’ x 8’ XEPS scored/squared edge 25 psi $14.00154896 1.5” X 4’ x 8’ XEPS scored/squared edge 25 psi $21.00204896 2” X 4’ x 8’ XEPS scored/squared edge 25 psi $28.0020249660 2” X 2’ x 8’ 60 psi extruded polystyrene, square edge $38.00304896 3” X 4’ x 8’ Extruded polystyrene squared edge 25 psi $42.00404896 4” X 4’ x 8’ Extruded polystyrene squared edge 25 psi $56.0005A803 1/4” X 4’ x 50’ Fan fold protection board $32.00

Based On Full Bundles - Larger Quantity Breaks Available

• 3000 lb. crush • 1 Belled end• 2 Perforated rows

Hydro-Channel6’ Basement Floor Waterproofing System

• Easy to install• Creates thermal break between

footing and basement fl oors• Proven assurance to protect the cold

joint (the area where the fl oor meets the wall)

$800HC1

$1000 HC2 for Retrofit

As Low As



CAULKS AND ADHESIVES

CHEMICALS AND GROUTS

• All weather formula subfl oor glue• Exceeds APA AFG-01 specs• Waterproof, weatherproof and permanent

Construction Adhesives

30029 QB-300 multi-purpose adhesive - 29 ounce $50.50• Drywall and metal framing adhesive• Waterproof and weather proof• 28 ounce cartridge

Premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant.

Premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant.

Polyurethane

Sealant

• One-part, acetoxy silicone sealant• Cures to fl exible rubber• Available colors: White, black, gray, dark bronze, and

ivory

Silicone Sealant

416712323 Vulkem 116 grey polyurethane sealant $7.75445805333 Vulkem 45SSL limestone self leveling $23.85

• High performance, low modulus, one-component hybrid sealant• Off ers excellent performance in moving joints• Applications: Expansion and control joints, precast concrete panel joints,

perimeter caulking, EIFS, aluminum, masonry and siding• Available colors: Bronze, black, redwood tan, white and buff

Polyurethane Sealant

• 6:1 thrust ratio• Ladder hook• Seal puncture tool and built-in spout cutter

$695140188

Professional Caulk Guns

140125 1/4 Gallon hex rod parallel frame $14.00

pout cutter

• E-Z thrust 10:1 thrust ratio• Ladder hook• E-Z load front cap

$795140111

1/10 Gallon Super Ratchet Rod

1/10 Gallon Hex Rod Parallel Frame

• E-Z thrust 10:1 thrust ratio• Ladder hook• E-Z load front cap

$969140112D

1/10 Gallon Drip Free Hex Rod Parallel Frame

$3000139-3 1/10TH Caulk gun

$3950340-1 Quart Caulk Gun

Deluxe Manual Powered Caulk Guns

Engineered Systems For Coloring, Texturing & Performance In Architectural Concrete

Call For Product Information And PricingNu Way Rents Stamps See Page 17

“Changing The Way The World Looks At Concrete”

Texturetop®

Lithochrome® Chemstain™

Lithochrome® Color Hardener

Chromix Admixture®

Pavecrafters®

Heavy Duty Epoxy Joint Filler

140MM80 MM80 epoxy joint fi ller1 Quart “b”/1 gallon “a” = 1 gallon unit

$90.00 Per Unit

The Problem: Joint edge spalling

The Solution: MM80 Epoxy Joint Filler

• Heavy duty semi-rigid epoxy joint fi ller developed specifi cally for narrow joints in industrial concrete fl oor slabs

• Has a cured hardness of Shore A90-95/D50-55• Specifi cally developed for heavy loads and hard wheel traffi c

13900 1 Quart weld-crete concrete glue $10.7513901 1 Gallon weld-crete concrete glue $30.0013905 5 Gallon weld-crete concrete glue $125.00

Chemical Concrete Bonding Agents

• For exterior and interior use, will bond new concrete, Portland cement, plaster and cementitious mixes to structurally sound concrete fl oors, walls, columns, beams, steps and ramps

• Can be “painted on” in a single application 1 hour to 10 days prior to concrete placement

• It is also used for: bonding setting beds for ceramic tile

Multipurpose Silicone Caulk

27511-000 VP-275 clear multi-purpose silicone $7.9527511-001 VP-275 white multi-purpose silicone $7.95


Plaster-Weld®

139011 1 Quart plaster-weld concrete glue $9.00139010 1 Gallon plaster-weld concrete glue $29.75139011-5 5 Gallon plaster-weld concrete glue $124.00

Weld-Crete®

• Bonds new plaster to any clean, structurally sound, interior surface.• Covers approximately 300 to 400 square feet per gallon• Concrete, brick, block, glass, ceramic tile, wallboard, metals and marble are suitable

sound surfaces, structurally

28” Quick Mix®

$1475 819

• Saves time and energy• Fits any 3/8” or larger slow speed drill (500 rpm)• Blade measures 8-1/2 x 4-1/2

• Revitalize faded, worn color• Impart a consistent appearance to mismatched colors• Help conceal surface imperfections with color• Minimize appearance problems

819L 36” Quick mixer -- 3/8” x 36” shaft $16.25893 Jiff y mixer 3/8” x 16” shaft, 3½” wheels $29.75FM661 Drywall mixer with 2 - 5” wheels $16.00

MixingPaddles

Bonds to wood-treated or untreated, steel, aluminum, brass, and most other types of plastics; glass, ceramic tiles, brick, concrete, mortar, and most other masonry materials.

As Low As

$450

Each For 72 or more91016

As Low As

$695

Each For 60 or more91007

As Low As

$4975Per Case For 6 or more cases

33829

As Low As

$4575Per Case For 6 or more cases

45029

As Low As

$450 When You Buy 60 Or More9718006323 Clear

With JoistFollower

As Low As

$495When You Buy 90 Or More960805323 Limestone

Non-Skid Texture Additive

01804 Drylok E-1 non-skid texture additive 4 oz. $5.25

• Increases traction and helps prevent slipping and falling by providing a slip resistant coating

• For use with DRYLOK E1 1-Part Epoxy Floor Paint and other oil, latex or epoxy fl oor paints.

• Use on garage fl oors, patios, stairs, basements, driveways, ramps and walkways.

Got Faded Stained Concrete?

We have a solution.....

Bring faded concrete color back up to that “new” look, or bring consistency to mismatched colors.

More Product Info

17St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100


Concrete Patches And Grouts

Floor Leveler

SpecSmooth SPECSMOOTH is a one-component, polymer modified concrete repair / resurfacing mortar for smoothing, resurfacing, rubbing, and restoring concrete surfaces.

Nuway DeluxeForm Release Agent

SpecStripReactive Form Release Agent

SpecStrip PlusA Premium Reactive Form Release Agent

A chemically reactive form release agent especially engineered to positively prevent bonding of the concrete to forms and form liners. It provides no waxes or silicones. V.O.C. compliant.

A chemically reactive form release agent especially engineered to positively prevent bonding of the concrete to forms and form liners. It provides no waxes or silicones. V.O.C. compliant.

A chemically reactive form release agent especially engineered to positively prevent bonding of the concrete to wood, steel, and aluminum forms. SpecStrip Plus contains no diesel, kerosene, waxes or silicones. V.O.C. compliant.

Curing Compounds

SpecRezWater Based Dissipating Resin Curing Compound

Cure Hard Sodium Silicate Cure & Dustproofer

A water based dissipating resin based emulsion curing compound for use on freshly finished horizontal and vertical concrete surfaces. SPECREZ is formulated to provide an effective curing membrane that will begin to dissipate after exposure to sunlight, weathering and/or traffic. May contribute to LEED credits.

CURE HARD is a spray applied concrete cure, hardener and dustproofer. CURE HARD deeply penetrates concrete surfaces to densify, harden and dustproof concrete and Portland Cement based material surfaces to help them achieve maximum abrasion resistance and without altering the natural appearance of the concrete. May contribute to LEED credits.

SpecRock

SpecPatch

SC Precision Grout

SC Multipurpose Grout

SC Metallic Grout

Duo Patch

RepCon 928

SpecFlow

SpecPlug

SPECROCK is a one-component, waterproof, nonshrinking, Portland cement-based anchoring cement that sets hard in 12-15 minutes. It expands as it sets and locks into the surrounding concrete.

SPECPATCH is a general purpose concrete repair mortar for concrete floors, walls, precast, tilt-up and masonry surfaces. SPECPATCH can be used for horizontal and vertical applications to provide a durable repair that can be shaped by shaving or sanding.

SC PRECISION GROUT is a non-shrink, non-metallic , high-flow, cement-based grout. SC PRECISION GROUT is formulated for a wide variety of grouting applications, from plastic to fluid through a controlled, positive expansion. Designed for high flow precision grouting applications. Designed to provide effective load bearing capabilities.

SC MULTIPURPOSE GROUT is a non-shrink, nonmetallic multipurpose cement-based grout. SC MULTIPURPOSE is formulated for a wide variety of grouting applications, from damp pack to flowable through a controlled, positive expansion.

SC METALLIC GROUT is a non-shrink metallic cementbased grout designed for industrial applications subjected to dynamic and repetitive loading. SC METALLIC GROUT does not contain chloride and is formulated for a wide variety of grouting applications, from drypack to fluid.

DUO PATCH is a two-component, polymer modified concrete repair mortar with integral corrosion inhibitor for use in horizontal, form and pour and when mixed to a stiffer consistency, vertical and overhead applications. DUO PATCH offers superior durability in industrial warehouse, parking deck, and roadway applications subjected to heavy loads and abrasion.

REPCON 928 is a single component, polymer modified, fiber reinforced, rapid setting concrete repair mortar for use on concrete floors, highway pavements, bridge decks and other applications requiring early resumption of traffic or use. REPCON 928 is formulated to meet the requirements of ASTM C928 Packaged, Dry, Rapid Hardening Cementitious Material for Concrete Repair and AASHTO T260.

SPECFLOW is a cement based, non-shrinking, selfleveling floor underlayment designed for interior use. This single component product produces a smooth subfloor that will accept floor coverings in as little as 12 - 18 hours after installation. Just mix SPECFLOW with water, pour or pump, and it will seek its own level to produce a smooth, flat hard surface

SPECPLUG is a durable, fast-setting hydraulic-cement mortar that stops flowing water through holes and cracks in concrete and masonry surfaces. SPECPLUG will not shrink or oxidize.

Sealers

Surface Retarders

Deco Shine Plus

Crystal Shine

SpecEtch

SpecSilane 20 WB

A methacrylate sealer developed specifically for exterior applications, including exposed aggregate and other decorative surfaces. Deco Shine Plus provides a clear protective coating that brings out the radiance and luster of all natural aggregate and preserves a long lasting, durable finish.

CRYSTAL SHINE is a lacquer sealer developed for interior and exterior applications, to bring out the radiance and luster of exposed aggregate and other decorative concrete surfaces with a durable protective finish. CRYSTAL SHINE is formulated with a unique solvent blend allowing fast-drying, solvent-base performance along with VOC compliance

SPECETCH is a spray applied, chemical surface retarderspecially engineered to expose the underlying aggregateof freshly placed horizontal concrete.

A 20% solids, 100% reactive, waterborne silane sealer that is designed for use on interior and exterior above grade concrete or masonry surfaces. SpecSilane 20 WB helps protect concrete and masonry surfaces, decks, pavements, parking structings, ramps, bridges, marine platforms, etc. against the corrosive effects of deicing salts, moisture and weathering to prevent spalling deterioration of concrete structures. V.O.C. compliant.

Cures and HardenersSpecHard

Water-Based Siliconate Sealer/Densifi er

Surface Shine

A penetrating, water-based siliconate chemical solution that seals, dust proofs and hardens interior concrete floors. Floors last longer, cost less to maintain, are safe to use and are guaranteed to resist dusting for years after application. May contribute to LEED credits. It is V.O.C. compliant, odorless, environmentally safe.

A transparent, high gloss, non-yellowing acrylic polymer engineered as a cure and seal specifically for exterior surfaces such as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior applications. Surface shine enhances the appearance of all treated surfaces with a high gloss sheen. Meets ASTM C-1315-95 Type I

E-CureE-Cure is a leading edge technology, clear concrete curingcompound that was developed to cure concrete as well as resolve compatibility issues related to flooring adhesives. E-Cure is a spray applied concrete cure, hardener and dustproofer. E-Cure penetrates and forms a temporary membrane to cure, densify, harden and dustproof concrete essential for proper strength evelopment.

CURE & SEAL 25 is a VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. Meets ASTM C-1315 and ASTM C 309, Type 1, Classes A & B

Nu Way Cure And Seal 2525% Solid Solvent-Based Cure & Seal

Form Release Agents

SFLOW SpecFlow premium self-leveling underlayment 50 lb. bag $25.95

DPATCH SC Metallic Grout non-shrink, 50 lb. bag + 1 gal jug $26.95

SCMETG SC Metallic Grout non-shrink, 50 lb. bag $24.75

SCMPG SC Non-Metallic Grout non-shrink 50 lb. bag $10.50

SCPCGROUT SC Precision Grout non-shrink 50 lb. bag $12.50

SPATCH SpecPatch general purpose 50 lb. bag $16.50

SROCK50 SpecRock quick-setting anchoring cement 5 Gallon Pail $28.50

SSMOOTH SpecSmooth concrete repair/resurfacing mortar 50 lb. $20.75

SPLUG50 SpecPlug fast-setting hydraulic cement mortar 5 Gal. $31.50

REPCON928 RepCon 928 concrete repair mortar 50 lb. bag $24.75RCONH RepCon H horizontal concrete repair mortar 50 lb. bag $25.25RCONVO RepCon V/O concrete repair mortar 50 lb. bag $20.25

CH5 Cure Hard sodium silcate cure and dustproofer 5 gallon $30.00CH55 Cure Hard sodium silcate cure and dustproofer 55 gallon $158.00

SH5 SpecHard Water-Based siliconate sealer densifi er 5 gallon $67.00SH55 SpecHard Water-Based siliconate sealer densifi er 55 gallon $625.00

SSHINE1 Surface Shine high acrylic sealer 1 gallon $25.50SSHINE5 Surface Shine high acrylic sealer 5 gallon $115.50SSHINEEX-5 Surface Shine EX high acrylic low VOC sealer 5 gal. $140.00

CS255 Cure and seal 25 solvent based cure and seal 5 gallon $79.75CS2555 Cure and seal 25 solvent based cure and seal 55 gallon $777.75

S20WB1 SpecSilane 20 WB penetrating sealer 1 gallon $30.00S20WB5 SpecSilane 20 WB penetrating sealer 1 gallon $136.50S20WB55 SpecSilane 20 WB penetrating sealer 1 gallon $1347.50

SSPLUS5 SpecStrip Plus Form Release Oil 5 gallon $48.75SSPLUS50 SpecStrip Plus Form Release Oil 55 gallon $426.25SSPLUS275 SpecStrip Plus Form Release Oil 275 gal. tote $2131.25

SSTRIP5 SpecStrip reactive form release agent 5 gallon $46.25SSTRIP55 SpecStrip reactive form release agent 55 gallon $395.00SSTRIP275 SpecStrip reactive form release agent 275 gall. tote $1966.25

NWDELUX5 Nu Way Deluxe form release agent 5 gallon $46.25NWDELUX55 Nu Way Deluxe form release agent 55 gallon $390.00NWDELUX275 Nu Way Deluxe form release agent 275 gal. tote $1925.00

DSP1 Deco Shine Plus concrete sealer 1 gallon $33.75DSP5 Deco Shine Plus concrete sealer 5 gallon $154.25DSPB1 Deco Shine Plus Brown concrete sealer 1 gallon $37.75DSPB5 Deco Shine Plus Brown concrete sealer 5 gallon $166.50DSPBR-5 Deco Shine Brown EX concrete low VOC sealer 5 gal. $195.00

EC5 E-Cure Concrete Curing Compound with Dye 5 gallon $45.00EC55 E-Cure Concrete Curing Compound with Dye 55 gallon $399.00

CSHINE-1 Crystal Shine Concrete Sealer 1 gallon $45.00CSHINE-5 Crystal Shine Concrete Sealer 5 gallon $399.00

SETCH1 SpecEtch Surface Retarder 1 Gallon $14.00SETCH5 SpecEtch Surface Retarder 5 Gallon $60.50

SREZ5 SpecRez WB dissipating resin curing compound 5 gallon $40.25SREZ55 SpecRez WB dissipating resin curing compound 55 gallon $325.25

SpecFilm Finishing AidSPECFILM RTU is designed to be used as an evaporation retardant and finishing aid on concrete flatwork of all types. When sprayed over fresh concrete, SPECFILM RTU forms a thin, continuous film which prevents rapid moisture loss from the concrete surface.



Chemical Rollers And Applicators

51034 3” Roller cage frame $2.2551094 9” Roller cage frame heavy duty $4.15148RF18HD 18” Reinforced roller frame (5 wire frame) $52.50149RG165 18” Solvent resistant roller tray 5 gal. Cap. $14.25148RF18LW 18” Roller frame (no wire frame) $21.75


Muratic AcidA 20 degree Baume Muriatic Acid (31.45%) for cleaning and etching masonry surfaces. Acid is an EXTREMELY CORROSIVE product. Meets Federal Specification O-H-765E (ASTM E 1146).

1394395 Muratic acid 1 gallon $6.85

• White tampico, densely fi lled • Two tapered handle holes (handle sold separately)• Acid resistant

$775 177

Heavy Duty Masons Acid Brush

1484585 #179 Masons acid brush (handle not included) $4.50

• White tampico • 20” long high density foam block• Acid proof

$575 78

White Tampico Acid Proof

75 8” White tampico brush $4.2566 8” Extra stiff blue plastic - acid proof $3.5067 20” Extra stiff blue plastic - acid proof $4.95

Cleaning Brushes

• White plastic • 6¾” handle• For applying all types of masonry and water paints

$550 565

White Plastic Solvent Resistant Brush

563 4¼” White tampico coater brush $3.85561 6½” White tampico brush $5.95

• 8” handle

$295 40

Palmyra Fiber Brush

44 20” Palmyra fi ber brush $4.95

$6500139CON20P

$15400139CON60P

• Unique chemical treatment for the waterproofi ng and protection of concrete

• Can seal hairline cracks up to 0.4 mm• Becomes an integral part of the substrate

$9660139MOD60P

• Applied as a second coat over Concentrate, Modifi ed produces a harder fi nish

• Speeds the curing of Concentrate• A single coat of Modifi ed may be used as an alternative to

a spray/tar emulsion• 60 LB. pail

$2575139CURE1G

• Curing agent designed specifi cally for Xypex crystalline waterproofi ng products

• May eliminate the need for water curing the Xypex coating in some cases

• Consult manufacturer for specifi c recommendations

Concentrate

Modified

Gamma Cure

$8475139PNP60P 60 LB

• Formulated as a crystalline, fast-setting, non-shrink, high-bond-strength, hydraulic cement compound for concrete repairs

• It stops fl owing water in seconds• Used to seal cracks, fi ll tie-holes and other defects in

concrete.

• Stops water and salt intrusion into concrete, brick, masonry and many types of stone without aff ecting natural vapor permeability

• Chemically bonds with the substrate forming a penetrated layer below the surface that acts as a one-way fi lter

• Can be applied with low pressure spray, brush, roller or squeegee

Patch’n Plug

Sil-Act Penetrating

Silane Sealer

1499030 9” Metal roller tray $4.3511266 3” Roller cover - 3/8” nap $ .99149B225 9” Pro one koat ¼” nap roller cover $2.09149B275 9” Pro one koat ¾” nap roller cover $2.75148RC1834 18” Roller cover ¾” nap pvc core $5.856002992 Paint strainer for 5 gal. Pail and pump up sprayers $22.95149R001 10” X 11½” wire paint screen for 5 gal bucket $3.49148A12 12” Lambswool pad only $8.65148A16 16” Lambswool applicator pad $9.75148AB12 12” Lambswool applicator and pad ¾” nap $10.25148AB16 16” Lambswool applicator and pad ¾” nap $12.95

See Page 19 For Rubber Gloves And Boots

Concrete Waterproofing By Crystallization™

A7 Adhesive Anchoring System

• All weather formula, down to 0°F and below• Fast curing time, 35 minutes at 60°F• Works in damp holes and underwater applications

$2775 A7L 28 ounce

Dual Component Epoxy Guns

• 26:1 Thrust Ratio• Patented Cartridge Stabilizing Plate

for Extra Cartridge Support• Multi Ratio Applicator

$10100 535-XSP

$9725 750-XSP

• 20:1 Thrust Ratio• Built-In Static Mixer Cutter• Cartridge Retaining Bars

$5925 140515

• 26:1 Thrust Ratio• Extra Durable Heated Treated Piston

Rod• Side by Side Epoxy Applicator

1-1 Epoxy Ratio

2-1 Epoxy Ratio

1-1 Epoxy Ratio$2075 A7-10 10 ounce

• All weather formula, down to 0°F and below• Fast curing time, 35 minutes at 60°F• Inlcudes nozzle and fi ts A100 tool

E24XL Epoxy nozzle 1/2” use with G5 and C6 epoxy $4.95E102 Epoxy gun for C6-18 oz. or G5-22 oz. $115.25A100 Epoxy dispensing tool for use with A7-10 $40.50

C6 Fast Curing Epoxy

• NSF standard 61 certifi ed for drinking water systems• 1 hour cure time at 70°F• Works in damp holes and underwater applications

$2925 C6 18 ounce

$3550139PNP20P 20 LB

$4325ATS421 1 Gallon

$14900ATS425 5 Gallon

1-1 Epoxy Ratio

2-1 Epoxy Ratio

1-1 Epoxy Ratio

Special Patch Horizontal Repair Mortar

A polymer-modified cementitious twocomponent concrete repair mortar for use in thin and thicksectionconcrete patching and overlays.139150 Special Patch horizontal repair mortar 50 lb. $28.50

Enduro 50 Non-Shrink GroutSpecially designed for damp pack to fluid applications. It is a blend of Portland Cement and natural aggregates with cementitious expansive agents.139050 Enduro 50 non-shrink grout 50 lb. Bag $10.50

Spectrum Sealer

Crystal Seal Concrete Sealer

Tough Seal Concrete Sealer

A single component transparent liquid designed sealer developed specifically for exterior surfaces, including exposed aggregate and other concrete surfaces. Spectrum’s reacted aliphatic polymer system brings out the radiance and luster of all natural aggregate and preserves a long lasting, durable finish.139471 Spectrum sealer 1 gallon $21.75139470 Spectrum sealer 5 gallon $99.75139473 Spectrum “brown” sealer 1 gallon $25.00139472 Spectrum “brown” sealer 5 gallon $112.50

Weather Seal WBPenetrating Sealer For Concrete And Masonry

Weather Seal WB is a water base deep penetrating siloxane sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc.139497 Weatherseal WB siloxane sealer 1 gal $22.65139498 Weatherseal WB siloxane sealer 5 gal $98.25

Silane 40Liquid Penetrating Sealer For Concrete Surfaces

A non-water base deep penetrating sealer designed to protect concrete and masonry surfaces, decks, pavements, parking structures, ramps, bridges, marine platforms, etc..139165 40% Silane penetrating sealer 1 gallon $42.75139164 40% Silane penetrating sealer 5 gallon $205.00

139171 1 Gallon tough seal concrete sealer* $34.50139172 5 Gallon tough seal concrete sealer* $157.50

139269 1 Gallon crystal seal concrete sealer $33.75139268 5 Gallon crystal seal concrete sealer $154.25

• Clear wet look fi nish• USDA accepted• 250 - 350 sq ft/gal coverage fi rst coat

*Will not resist brake and hydraulic fluids

• Chemical, gas and oil resistant*• Dries to a high gloss• 200-250 sq ft/gal coverage fi rst coat Chemical

Resistant

Great ForDecorative

Concrete

19St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

WORK WEAR

• Refl ective strap• Fits over most work shoes and boots

• Micro-foam Nitrile coatings are compatible with light oils and will provide a good grip and excellant abrasion resistance

• 100% silicone free• 360° breathability

• Feather light, Durable construction• Chemical and UV resistance• Made in USA

$297584050Size 7 Thru 15

$45034874TAvailable in Large & X-Large

$5700BFCSBSize 4 Thru 13

17” Hi-Viz PVCSlicker Overboot

G-Tek Maxi Flex UltimateNitrile Coated Gloves

16” CruiserSafety Boot

Self Cleaning

Cleated Sole

Composite

Safety Toe

• Fits over work shoes• Sizes Available: 8 thru 18• Rubber soles for slip resistant comfort

$21951479010

5 Buckle Rubber Boots

Deluxe Carpenter Apron - Fixed Pockets

$4345 174274• Reversed Top Grain Leather • 5 Main nail/tool pockets• 6 Smaller pockets fi t pliers, nail sets, pencils, etcts, pencils, et, eeeeee, eeeee, eeeeeeeeeeeee, ee, ee, e, ee,,, c

21448 17 Pocket heavy leather pro framers combo system $185.956714 31 Pocket 5 pc. Comfort lift combo rig $90.965608 16 Pocket 4 pc. Cordura carpenters combo $89.51178234 8 Pocket leather carpenter’s nail & tool bag $30.70179354 10 Pocket leather carpenter’s nail & tool bag $45.46149C12 5 Pocket canvas waist apron $5.26

ToolHolders

439 Steel loop hammer holder $3.00464 16’ - 30’ Measuring tape holder $7.151104 4 Pocket multi-purpose tool holder $6.001518 Utility knife holder with integral measuring tape clip $6.505023 Deluxe cordless drill holster $13.99

Cell PhoneHolders

1514 iPhone® mobile phone holder $12.151517 Horizontal cell phone holder $11.005124 Mini black cell phone holder $8.255124M Mossy oak® cell phone holder $10.505127 Large black cell phone holder $10.50

BucketPockets

1118 30 Pocket outside bucket organizer $14.501119 48 Pocket inside/outside bucket organizer $15.25

ToolBags

1164 32 Pocket 24” Megamouth tote bag with metal frame $52.95304X 20” X 16” Reinforced Mason’s leather bottom tool bag $51.65C300 24” X 16” Leather bottom tool bag $64.00

KneePads

146361 Ultrafl ex non-skid professional kneepads $20.75146363 4 Pc. Replacement strap for ultrafl ex knee pads $5.30146G361 Professional Ultra-fl ex gel knee pad $25.85146V310 Molded, natural rubber kneepads $14.72146V6355 Buckle style easy-swivel kneepads $24.46146V6356 Buckle style non-skid kneepads $27.50

Belts AndSuspenders

C501 Heavy duty cotton web work belt $7.97E4521 2” Embossed leather work belt, fi ts 29” - 46” waist $20.485625 5” Padded comfort belt, fi ts 30” - 46” waist $28.00110USA USA print heavy duty elastic suspenders $13.15110BLU Blue heavy duty work suspenders $10.75

• No Right/ No Left - For no-hassle design • Easy on/ Easy off - Provided by 800% elongation, and

smooth, drag-free inner surface• Lasts 4x longer - Made out of Natural Latex Rubber,

providing enhanced material strength

17” Slush Boots

Anti-Impact Glove with Wrist Support

17851 17” Slush boot, medium 8 - 10 $46.5017852 17” Slush boot, large 11 - 12 $46.5017855 17” Slush boot, large/x-large 13 - 14 $46.5017853 17” Slush boot, x-large 15 - 16 $46.50

$2999 B17

$3499 B04

• 15 ounce, 100% cotton denim• Slim seat and thighs• Two reinforced back patch pockets

• 9.5-ounce, fi rm-hand, 100% cotton drill• Multiple tool and utility pockets• Two reinforced back pockets

Relaxed Fit Denim Jeans

Drill Dungaree Double-Front

$2150 99DEERL• Supple grain deerskin• Absorbent sweat wipe patch• Available in sizes M, L, XL

• Supple grain goatskin• Reinforce contact zones• Available in sizes M, L, XL

$1825 99ACE-GL

Tool Handz Gloves

Made In USA

• Flexible spandex with durable sheepskin• Streamlined performance fi t• Available in sizes M, L, XL

$1700 99BLUEL

9PB-L Grain pigskin driving glove - Large $8.259PB-XL Grain pigskin driving glove - X-large $8.25

• Provides protection from abrasion, impact and shock• Fingerless style for optimum dexterity• Wrist support minimizes extension and over fl exion of

the wrist to prevent RSI

$4900 7650

• Full cut sizes to fi t over clothing.• Constructed with heavyweight PVC• Jacket, bib pants, detachable hood.

$1595 R101

Medium Thru 4X Large

Rain

Wear

• Full cut sizes to fi t over clothing.• Constructed with durable water

resistant Oxford Polyester.• Jacket, bib pants, detachable hood.

$3750R107Large Thru 2X Large

High Visibility Rain Wear

• ANSI/ISEA 107-2004 Class 3 certifi ed.• High visibility fl uorescent yellow body

material with retro refl ective stripes.• Jacket, bib pants, detachable hood.

Starting At

$5495R111 Large Thru 3X Large

High Visibility Class 3 Certified Rain Suit

2-Pc.

Trench Coat

Available

22 Pocket Leather Pro Framer Tool Belt Set• Premium Top-Grain Leather• Hand-Specifi c Tool Holders Promote Maximum

Working Rhythm on the Job• Copper Rivets Reinforce Main Bags• NoSpill™ Tool Holder System• Function Engineered for the Modern Builder

$285505080DB

5055 Stronghold® Suspension System - For use with Tool Belt $115.50



6840D Pro series solid brass padlock $17.506321KA Pro series 2-1/8” keyed alike high security $26.506325KA Pro series 2-3/8” keyed alike high security $31.956327KA Pro series 2-5/8” keyed alike high security $35.65

Large Selection Of Keyed Alike Padlocks

Available

$2550 6321D• Solid iron shackle shroud resists harsh physical

attacks • 5 spool pin tumbler cylinder for added pick

resistance • Dual ball bearing locking mechanism resists pulling

and prying

Reserved Key Numbers Available(Keys Cannot Be Duplicated)

410BLKKA Black safety lockout padlock $12.85410BLUKA Blue safety lockout padlock $12.85410GRNKA Green safety lockout padlock $12.85410ORJKA Orange safety lockout padlock $12.85410REDKA Red safety lockout padlock $12.85410YLWKA Yellow safety lockout padlock $12.85M421 Safety lockout hasp with 1-1/2” dia. jaws $6.85

• 1-1/2” wide 1-3/4” tall Xenoy body, shackle w/1-1/2” clearance

• Designed exclusively for Lockout/Tagout applications

• Compliance with OSHA “one employee, one lock, one key” directive

Lightweight Safety Lockout

6121KA Pro series 2-1/8” weather tough keyed alike $19.506121LJKA Pro series 2-1/8” weather tough lng shackle $20.506125KA Pro series 2-3/8” weather tough keyed alike $22.506127KA Pro series 2-5/8” weather tough keyed alike $25.75

$1850 6121D

• Hardened boron alloy shackle for superior cut resistance • 5 spool pin tumbler cylinder for added pick resistance • Dual ball bearing locking mechanism resists pulling and

prying

Pro Series Weather Tough Padlock

Job Site Security

3/8” X 6’ Coated Steel Cable

$875 78DPF

• Braided steel wires for strength and fl exibility• Galvanized steel cable resists rusting• Recommended use with laminated, solid steel and mini

U-Locks

3/8” X 6’ Adjustable Locking Cable

$2200 8413XDPF• Patented locking mechanism holds the

cable tight at any position• Convenient, rekeyable cylinder • Weather tough and rust resistant lock

body and cable

79DPF 5/8” X 6’ coated steel cable $20.501777941300 3” X 300’ Mini roll caution barrier tape $4.95

Resettable Coated Cable Lock

$1295 8119DPF

• Flexible braided steel cables for strong cut resistance

• Set-your-own combination convenience and security

• Ideal for ladders and generators

6-1/4” Industrial Grade Single HingeHigh Security Hasp

$950 720DPF

• Hardened steel body for added strength • Hardened boron alloy staples resist cutting and sawing • Secure hard-to-lock property

702D 2-1/2” Security hasp $3.45703D 3-1/2” Security hasp $4.25704D 4-1/2” Security hasp $5.25706D 6” Security hasp with pinless hinge $9.65

Solid Steel Round Padlock

$1400 40KADPF

• Hardened steel shackle for extra cut resistance • 4-pin cylinder helps prevent picking• Ideal protection against bolt cutter attacks

Pro Series High Security Shrouded Padlock

Ask AboutAsk AboutPurchase OptionsPurchase Options

Rental Rates

Daily $115

Weekly $335

Monthly $795

LTN6L

• Four 1000 watt lights• 6KW generator• 30-foot adjustable tower rotates

360-degrees

Ear Protection

$875 1010925Viking V1 Multiple Position Earmuff

• NRR 25 rating • Multiple-position headband allows wearer to

select position over the head, behind the head or under the chin

• Dielectric construction

$6900 1030331

• Radio volume does not exceed 82 dB• Lightweight design provides all day comfort• NRR 25

Heavy Duty “Caution” Flagging

• 3” X 1000’ • 10 Rolls per carton• 4 Mil nominal thickness

Heavy Duty “Danger Do Not Enter” Flagging

• 3” X 1000’ • 10 Rolls per carton

As Low As

$755Each for 30 or more

$10.95 ea. for 1+ rolls$9.30 ea. for 10+ rolls

As Low As


1505151Viiiiiiii

Safety Supplies

$11500 1030333

• Limits radio and sound amplifi cation to 82 dB• Separate controls for sound amplifi cation and radio

volume • NRR 25

Ear Muff With Am/Fm Radio

Ear Muff With Am/Fm Radio & Sound Amplification

0110958

150MAX1 NRR:33 no cord orange foam ear plug

150MAX30 NRR:33 orange pre-shaped with cord

340-4004 NRR:25 ultrafi t yellow with cord

PL101C NR 29db classic yellow with cord

QD30RC NRR 26 corded molded foam with case

P200 Push-to-fi t foam 29dB ear plugs

Foam Ear Plugs

As Low As

24¢Each For 1000 or more

Standard Safety Helmet

$1150 150633With Ratchet Suspension

• Includes soft, cushioned brow pad to absorb moisture.

• Features universal accessory slots for visors.• Independently tested to meet the ANSI Z89.1

standard for Type 1, Class E, G and C.• Available Colors: White, yellow, red, orange, and green

150636 Hi-viz orange standard safety helmet $11.50150638 Replacement ratchet suspension $8.75

150675 Curved clear visor for V40 and 677 headgear $5.001508154LF Clear visor for 150K huntsman ratchet type headgear $4.50

Hard Hat Visors

313000 Half mask, dual cartridge $31.75T105810 Multi containment fi lters for respirator (sold in pairs) $25.501508500 RPDM crews nuisance dust mask 50 per box $11.953M-8210 Dust and mist respirator with exhale valve $1.69871100 Model 2200 dust and mist respirator $1.69

Respirators And Dust Mask

$1295 71216

• CoolSense Air Flow • Rain trough helps keep rain off workers • Complies with ANSI standard for Type I, Class C only• Available in orange, white and pink

Serpent Hi-Viz “Ventilated” Hardhat

Prevents Heat Build-Up To

Keep You Cooler

3” X 500’ Re-inforced Barricade Tape

• Super strong 300 lb break strength is 16x stronger than regular barricade tape

• Long term applications • No stretch or sag

$232576-0600

21St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

2A150088 4’ X 50’ HiViz Yellow Green Diamond Safety Fence $39.00XT60004850 4’ X 50’ Green diamond $35.50150201100 4’ X 100’ Orange safety fence, 30 lb. $54.5015060 60” Studded “T” post with anchor plate $6.50

SAFET Y SUPPLIESWide Body Traffic Cones

12” Wide Body

Traffic Cone 3004019

3004042 18” Wide body traffi c cone $11.253004158 28” Wide body traffi c cone $18.35

Nemesis Safety Glasses

• Meets all ANSI Z87.1+ impact standards• 99.9% protection from harmful UV rays• Soft touch temples for added comfort,

off ers unobstructed sight lines

Safety Reading Glasses

$1250 3013307+2.0 Diopter Clear Lens

$15550 70001

4’ x 150’

3013305 +1.0 Diopter clear lens w/black frame $12.503013306 +1.5 Diopter clear lens w/black frame $12.503013308 +2.5 Diopter clear lens w/black frame $12.50

$1425 3011712+1.5 Diopter Brown Lens

• Stylish ergonomic nylon frame• Precise placement of lens inserts helps prevent accidents, headaches

and eyestrain

• Larger lens for more complete wrap around protection• Precise placement of inserts allows for distortion-free forward vision• Meets ANSI Z87.1+ Impact Standard

3011713 +2.0 Diopter brown lens $14.253011714 +2.5 Diopter brown lens $14.25

Safety Glasses

$495 14GB7MBlack Frame/Gold Mirror Lens

14GB83 Black frame/gray lens $3.9914GBOM Black frame/indoor-outdoor clear mirror $4.80

$2695 41GB3Z4x4™ Black Frame/Black Temple Tips/Gray Polarized Lens

• Wrap-around frame• Meets or exceeds ANSI Z87.1+ standard.• Polycarbonate lenses that come with an anti-scratch coating.

• Feather-light for all-day comfort • Meets or exceeds ANSI Z87.1

standard CSA Z94.3 certifi ed • Scratch- and impact-resistant

hardcoated lens

150460M Clear temple/indoor-outdoor clear mirror $3.60150461M Gray Temple/Red Mirror Lens $3.601504680 Clear temple/clear lens $2.501504683 Gray temple/gray lens $2.99

Splash Goggles

$300 32061

$750 21GB78

• Meets or exceeds ANSI Z87.1 standard CSA Z94.3 certifi ed.

• Durable polycarbonate lens• Can be worn over prescription glasses or alone

• Glasses to goggles in just a snap…change your safety eyewear to meet your needs.

• Foam-lined frame helps block dust and debris• Meets the ANSI Z87.1+ high impact standard

Hi Visibility Vest

$375 20030Orange

20040 Lime high visibility poly mesh $3.75

$675 21045Orange L/XL 8210Z

• ANSI Certifi ed Polyester Mesh (3.3 oz.)• 2” Level 2 ANSI Certifi ed Tape• One inside pocket• Zipper closure

• Hook & Loop closure• Polyester Mesh (4 oz.)• 1-inch Retrorefl ective Tape

21047 2XL/3XL class 2 econo orange vest mesh #8210Z $6.7521055 L/XL class 2 econo lime vest mesh #8210Z $6.7521057 2XL/3XL class 2 econo lime vest mesh #8210Z $6.75

Class 2 Econo Vest

As Low As

$825Each For 60 or more

28” Traffic Cone with Reflective Stripes

As Low As


0350010

18” Stop And Slow Paddle

$5275 150FSS18

• ABS plastic paddle• 2-piece 2” x 81” plastic staff • Meets MUTCD requirements

Plastic Barricades• 24” X 36”• Meets MUTCD specifi cations,

NCHRP-350 Type 1• Light sold separately

149Y2K Sundowner fl ashing barricade light $26.75

150SS18 18” Stop and Slow Paddle with 10” Handle $21.00

Rental Rates (2085792 Barricade)


$5.00 $5.00 $18.00

As Low As


2085792

$5253000354

Smoke, Amber, Blue Mirror Lens Available

• Looped handle allows for easy movement and handling

• Made of durable bright orange low density polyethylene

• Tested and certifi ed to meet the crash worthy requirements of NCHRP-350

• Red cone with black base• 6” Upper and 4” lower refl ective collar• Engineered to meet MUTCD Spec and

NCHRP-350 category requirements • Reinforced border• Flame Retardant coating• UV resistant

Looper Channelizer Cone


As Low As

$2255Each

For 100 or more46266CRU

Base Sold Separately

30DH 30 LB. Base

As Low As

$1700 Each

For 100 or more

16DH 16 LB. Base

As Low As

$895 Each

For 100 or more

DOT

APPROVED

$1325 22115Orange L/XL 8320Z

• ANSI Certifi ed Polyester Mesh (5 oz.)• 2” Level 2 ANSI Certifi ed Tape• One inside pocket• ANSI 107-Class 2

22117 2Xl/3xl class 3 orange vest mesh #8320z $13.2522125 L/xl class 3 lime vest mesh #8320z $13.2522127 2Xl/3xl class 3 lime vest mesh#8320z $13.25

Class 3 Hi Visibility Vest

Fat Head Safety Glasses

$1275 SK-XL118Blue Mirror Lenses

• Complies with ANSI Z87.1 2003 • Edge frames are lightweight, fl exible and durable • Scratch resistant and off er UVA, UVB and UVC protection • Yellow, smoke and silver mirror lenses available

SKAP-XL119 Kazbek XL with red mirror aqua precision lenses $13.00

Dakura Camo Safety Glasses

$1075 SW112CFYellow Lenses

• Complies with ANSI Z87.1 2003 • Edge frames are lightweight, fl exible and durable • Scratch resistant and off er UVA, UVB and UVC protection • Copper and smoke lenses available

Khor Safety Glasses

$1300 SDK116Smoke Lenses

• Complies with ANSI Z87.1 2003 • Edge frames are lightweight, fl exible and durable • Scratch resistant and off er UVA, UVB and UVC protection

SDK117 Khor safety glasses w/silver mirror lenses $13.00

Safety Fence

Debris Netting

• Made of durable polyethylene • Rugged yet fl exible, reusable, high

visibility, and U.V. stabilized• Ideal for temporary or permanent

enclosures



• 4” X 60’• Self adhesive• Black

$5188 NST20BK-4X60

Non-Skid Abrasive Safety Tape

SAFET Y SUPPLIES

Fall-Arrest Harnesses

$8350 87140

• Lightweight polyester construction for comfortable all-day use

• One “universal” size fi ts most people.• Harnesses are certifi ed and compliant with

ANSI and CSA requirements.

87141 Klein-lite® full body harness, d-ring $110.7587145 Klein-lite® full body harness, 3 d-rings $145.2587473 6’ Klein-lite® nylon-webbing deceleration lanyard $92.75

$17275 87150

• Includes Fall-Arrest Harness and Deceleration Lanyard.

Klein-Lite® Tradesman’s Set

$1150 93212Fixed front goggles

• Fits easily over prescription glasses.• Supplied with a 2” x 4-1/4”, shade 5 lens protected by a clear cover lens.• 6 vents that assure ample ventilation.

$1500 93213Lift front goggles

Welding Goggles

• Fits easily over prescription glasses.• 6 vents that assure ample ventilation.• Supplied with a 2”x4¼”, shade 5 lens protected by a clear cover lens.

$4250 3002498

• Narrow shell design is perfect for work in tight spaces• Can stand up to radiant heat of 350˚ F• Meets ANSI Z87.1, CSA Z94.3 standards.

Welding Helmet

Rental Rates

Daily $55

Weekly $195

Monthly $495

Rental Rates

Daily $300

Weekly $765

Monthly $2250

WTSP-08

WTMMB-SLL (A)

• 48” X 96” trailer mounted sign• 2 Solar panels• 4 Lead acid batteries

• Solar panels charge batteries automatically• Under 3000 pounds• NTCIP compliant, Meets MUTCD,AASHTO

(NTPEP) tested

Revolution Fall-Arrest Harnesses

$23250 RDTQC/UBKUHARNESS DUAL TECH WEBBING UNIVERSAL SIZE

RIAC1 Sliding belt connectorpoints - 3 pack $16.25RIAT1 Mini cell phone holder with snap $11.45RIAT2 Regular cell phone holder with snap $12.90RIAT5 Med. Open bolt/bull pin bag $24.58

RIAT6 2 Pocket nail & tool pouch for revolution harness with connector $21.25

RIAT8 Padded hammer loop with connector $9.59RIAT9 Open end pliers and tool holder $9.59RIAC2 Universal accessory & belt clip for revolution system 2/pack $7.90

Harnesses, Lanyards And Rope Grabs

496 5,000 Lb Miller Grip anchor $132.00497 10,000 Lb Miller Grip anchor $235.00

Miller Grip Portable Anchorage Connector

842844/LYK Full adjustable body harness non-stretch polyester webbing $199.50

E650-77 Harness w/back pad and belt fully adjustable w/ side rings $193.85

8173 5/8” Trailing rope grab, compact hands free design $95.75

8174X Manual rope grab for use on 5/8” or 3/4” synthetic lifeline $164.50

216M Manyard ii “green” shock absorbing lanyard 4-6’ stretch $84.95

216WLS 6’ Lanyard w/shock absorber 2 double locking snap hooks $78.25

8327 Retractable web lanyard with 10’ nylon webbing & carabringer $337.50

928LS Miller sfstop shock absorbing pack with 1 d-ring & 1 snap $66.75

FL113 11’ Retractable miller min-lite lanyard with carabringer $265.00

RL20G 20’ Self-retracting lifeline, 3/16” cable $693.50

$30525 RDTQCBDP/UBKUHARNESS WITH PADDED BELT, SIDE D-RINGS

$23275 RDTTB/UBKUHARNESS WITH TECH WEBBING & TONGUE BUCKLE

920-2003 Blue leather welding gloves sewn with Kevlar thread $15.25

15 Lite Solar Powered Arrow Board

Variable Message Sign Board

Rebar Safety Caps

As Low As


PC110 #3 - #8 Impalement prevention with steel plate

As Low As

24¢Each For 100 or more

1713125 small #3-#9 Hi Viz Orange Mushroom Style Safety Cap

PC200 #8 And up impalement prevention w/steel plate $4.20

1711225 Large #8 - #18 hi viz orange mushroom style $ .45

Rebar Chain Assembly with 2” Rebar Hook

3’ Webstrap Anchor Sling

Rebel™ Self Retracting Lifeline - Web

1240074 6’ Web lanyard with ez-stop & rebar hook $135.001385501 6’ Rope lanyard with 3600 lb. gated hooks $39.50AL308A6 6’ Rope lanyard w/AJ590A hook on one end $112.00

2000112 Carabiner 11/16” opening, self closing locking gate $46.50

2199803 Roofer’s Compliance In a Can $150.00

Pro™ Line Positioning Harness

Compliance In A Can™

$7000 1191206

$7200 2199802

ss

• PRO harnesses have a ergonomically designed chassis for better fi t and function

• Back D-ring and side D-rings• Pass thru leg straps for quick and easy donning

$9900 AF77710

• Hooks: AJ523A - Zinc plated stamped steel and AJ535A - Zinc plated hook

• Meets or exceeds OSHA 1926

$4800 AJ450A

$18900 AD111AR

• 5000 lb. anchorage point• Easy to install• Meets OSHA 1926 & ANSI Z359 standards

• Compact, lightweight design• Self-locking snap hook on lifeline• Swiveling anchorage point• 11 ft. (3.3m) 1” (2.5cm) polyester web lifeline

$5000 1370007• 3,600 lb gated hooks meeting ANSI Z359• Lightweight design• Limits fall arrest forces to 900 lbs. or less

6’ Rope Shock Absorbing Lanyard - 2 Snaphooks

• 5 Point harness• Single leg shock-pacl lanyard with 3600 lb

hooks

6’ Lanyard W/Shock Absorber & Rebar Hook

• Includes one self locking snap hook and two rebar hooks

• Limits fall arrest forces to 900 lbs. or less• 3,600 lb gated hooks meeting ANSI Z359

$7900 1340180

Call Our Sales Department

For All Your Safety NeedsPro Construction Style

Harness With Back D Ring

Construction Vest Style Harness With Back D Ring

• Tongue buckle legs• Dorsal D-ring• Medium/Large and Extra Large

• Tongue buckle legs• Bakc and frint D-rings• 420 lb capacity• Medium, Large and Extra Large

$9700 1191374/1191375

$195001107736/1107737/1107738

23St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

32A 32” Carpet mask applicator $124.00

DGRC 24” X 30” Tak Mat Refi ll - 4 Pads per pack $67.00

BLD072 3” x 60 yds Builder Board Tape $12.50

OSHA Danger Signs

47022 10” X 14” danger men working above $14.2547009 10” X 14” danger men working $14.2547010 10” X 14” danger no smoking $14.2572246 10” X 14” fl ammable materials $14.2574187 10” X 14” danger hard hat area $14.2547008 10” X 14” danger keep out $14.25

• Weatherproof on/off switch• UL & CUL listed• Includes heavy duty clamp and hook

• 800 Lumens, High Power LG LED’s• 90° angle light distribution• 100% die cast aluminum housing

$1750 L-845

$5000 08-00706

250W Halogen Clamp Light

24 LED Work Ligh with Stand

• Weatherproof on/off switch• UL & CUL listed• “S” stand with foam grip handle

$1675 L-33

500W Halogen Portable Worklight

• Weatherproof on/off switches• UL & CUL listed• Telescopes from 34” to 48” with “Easy Grip” locking

nuts

$4175 L-1719

500W Halogen Twin Head Worklight

• Heavy duty construction• Sled base and tripod base included• Telescopes from 40” to 76” with “Easy Grip” locking nuts

$7995 L-19

1200W Halogen 2-N-1 Twin Head

Tripod Light

SAFET Y SUPPLIES

JOB SITE SUPPLIES

$1675 TP-4$29900 CVR1036393

4” X 108’ PVC Threshhold Tape Cover Shield 36” X 393’ Fire Retardant Floor Protector

$5275 5J1193D

32” X 200’ Carpet Protection Sheeting

$4300 DGCRe-Usable Platform

With One 30 Layer Mat

24” X 30” Clean Room Mat

$650 265 X-Large 10 Pair Per Box

BLD38100

Non-Woven Shoe And Boot Covers

38” X 100’ Builder Board Surface Protection

$1250 2500

Adjustable Steel

Roof Bracket

• Protects metal thresholds during construction

• Stays fi rmly anchored yet removes cleanly

• 10 mil• Meets NFPA standards for

fi re retardancy• Easy to install and remove

• Tough 2 mil non-skid surface• Protects carpet for up to 30 days• A must for high traffi c areas

• Stop dirt and debris from being tracked into work area

• Made of breathable polypropylene• Thick non-skid soles

• Protect expensive fl ooring with the toughest, most durable paperboard on the market.

• Covers the same area as 10 sheets of masonite.• 100% recyclable

Traffic Flag

18” X 18” Orange Fluorescent Traffic Flag On 24” Dowel 150VF1824

As Low As


First Aid Kits

$272517133

• 25 Person kit• Complies with OSHA• Plastic gasketed

17137 50 Person fi rst aid kit $47.50

HITCHCLIP® Roof Anchor System

$62510560 3 Pack

2502 Fixed steel roof bracket $10.50

Miscellaneous Work Wear

14600442 Large polypropylene coverall $7.5514600443 X-large polypropylene coverall $7.5514609907 XX-large polypropylene coverall $9.50

• High Noise Reduction Rating of 25 dB• Meets ANSI S3.19-1974 standard• Padded stainless steel spring wire headband maintains

constant pressure

$2599 00008860402

tains

Over The Head Orange Ear Muff

E-1 Full Brim with Ratchet Suspension

$1495 E1RW

• 8 Point ratchet suspension• Meets ANSI-Z89.1 TYPE 1, Class E, G, or C

$3550WL088

$3395WL137

$4275WL139

$3175WL136

$1475WL084

$1725WL080

1” Thick Felt Leather Knee Pads

Hinge Knee Pads w/Hard Shell Cap

Knee Pad Super Soft/ Front Closure

Non-Skid Knee Pads

Ultra Rubber Knee Pads

2-Strap Polyurethane Knee Pads

• Tough leather makes for long wear• 1” thick soft felt is held in by riveted

construction

• Hinge style• Extra cushion back with hard shell cap

• Protect knees with soft neoprene pad• Unique, easy to use front Velcro« strap

• Professional foam rubber hard shell knee pads• Contoured cap provides extra support and

comfort for heavy use

• Durable rubber with comfortable foam pad insert• Adjustable, replaceable straps, accordion style cap

• Made of lightweight, durable polyurethane• Molded in one-piece• 2 replaceable straps hold pad to knee

As Low As


• 10” adjustable platform• 3-position platform: 30°, 45°, 60°• Commercial grade 12- gauge steel construction• Capacity: 1 worker plus 40 lbs. per 8’ staging• Maximum 8’ spacing between brackets

• Easy to install and Incredibly lightweight• No fl ashing required• Numerous accessory options• Powder coated aluminum• Roof Pitch - 0/12 - vertical/sheer• Worker capacity range - 130 - 420 lbs• Min. breaking strength - 5,000 lbs

00008863202 Chainsaw protective chaps - large $91.99



JOB SITE SUPPLIES

Shopmax™ Wet Wipes Hand Cleaner

$1275 192592 72 ct. bucket

• Pre-moistened, cloth like disposable wipes.• Special Hygienic Micro Emulsion Formula makes it tough

on dirt but gentle on skin.• Won’t leave a residue.

Safety Cans

• Galvanized steel Type-1 • Meets OSHA requirements • Approved by and listed by FM, UL, and ULC

F-15 Funnel for safety can $6.50U110FS 1 Gallon red safety can with funnel $34.75U120FS 2 Gallon red safety can with funnel $40.50U150FS 5 Gallon red safety can with funnel Best Value $33.50U120SB 2 Gallon blue safety can for kerosene $36.50U150SB 5 Gallon blue safety can for kerosene $30.50U150SFSY 5 Gallon yellow safety can type 1 with funnel $30.501215 5 Gallon D.O.T. Approved type II with 7/8” fl ex hose $289.00

Canvas And Poly Tarps

A1020 10’ X 20’ Blue poly $9.50A1525 15’ X 30’ Blue poly $21.21A2030 20’ X 30’ Blue poly $27.75A2540 25’ X 40’ Blue poly $36.85S16X20 16’ X 20’ Silver/black poly $68.00S20X30 20’ X 30’ Silver/black poly $128.00S20X40 20’ X 40’ Silver/black poly $169.00100812 8’ X 10’ 10 oz. Canvas Made in USA $34.00101610 10’ X 16’ 10 oz. Canvas Made in USA $68.00162410 16’ X 24’ 10 oz. Canvas Made in USA $162.00202410 20’ X 24’ 10 oz. Canvas Made in USA $202.00

Additional Sizes Available

Brooms And Brushes

• Center rows coarse brown plastic and borders rows silver fl agged-tip plastic

• Recommended use: For dry sweeping smooth or rough fl oors that have heavy dust and dirt accumulations

• Length of trim: 3 inches

3724 24” Silver fl agged tip plastic broom $14.951024 24” Black tampico fl oor broom $17.502024 24” Black plastic bristle fl oor broom $15.501418 18” Prime stiff Palmyra fi ber garage broom $10.951436 36” Prime stiff Palmyra fi ber garage broom $24.251618 18” Heavy duty brown polypro street push broom $14.85567 7” White tampico paste brush $4.1540 8” Palmyra brush $2.953029 9” Truck brush - white poly bristles $13.75

$1595 3524

$3275 2224-AY

• 24” Polystyrene broom with scraper • Polystyrene material provides exceptional sweeping action • Fully assembled with handle brace, and steel scraper

Scraper attachment ideal for removing mud, gravel, paint, grease, gum and other debris

10 Gallon Wet/Dry Tough Poly Vac

$12900 9625010• 4.0 Peak HP• Airfl ow: 130 CFM• Heavy duty suctionIncludes: 1-1/2” X12’ economy lock on hose, (2) 1-1/2”

wands, 14” fl oor nozzle, blow molded crevice, claw

nozzle, high quality collection bag, and ultra web

fi lter

/2”

Propane Tanks

Concrete Curb Stops

Bollards, Top

Caps and Post

Sleeves

149-20 20 Lb. Propane cylinder refi llable tank $50.55149-30 30 Lb. Propane cylinder refi llable tank $59.55149-40 40 Lb. Propane cylinder refi llable tank $93.90

149CS1 6’ x 5” x 9” Curb stop 2 holes $31.50149CS7 7’ x 6” x 9” Curb stop 2 holes $62.00149CS8 8’6” x 10” x 12” Curb stop 2 holes $175.00

150684 6” X 84” Steel pipe bollard $85.00TOPGARD 6” Bollard Topgard Cap with setting bolt $24.001736 6” x 56” Yellow Plastic smooth bollard cover $54.00

Zinc Rich Galvanize

$1075 149141 13 OUNCE

• Contains 97% pure zinc metallic powder, which yields 94% zinc and 6% resin dry fi lm

• Stops rust and corrosion on any iron or steel surface• Meets performance requirements of MIL-P-46105, and DOD-

P-21035A

$1020 02094 9 OUNCE• Designed to lubricate, waterproof and protect• Especially useful in lubricating metal to non-metal surfaces• Meets FDA Regulation CFR 21-178.3570 for incidental food

contact. NSF H1 Registered

Electrical Grade Silicone Lubricant

Sweeping Compounds And Oil Dry90815 50 Lb. “Wax” base, no grit, green fl uff y $42.5090307 50 LB Sweeping Compound Oil Based With Grit $14.758440 40 Lb. Thrifty-Sorb Multipurpose Floor Dry $9.50

Re-inforced Poly 12’ - 40’ X 100’ In-Stock

149100 Poly sheeting clip for 1”-1½” scaff olding $.996R20100 20’ X 100’ reinforced clear poly $80.0040F20100 4 Mil fi re retardent 20’ x 100’ poly $81.00

903-04-7 Cartridge fi lter $16.19905-80-2 Foam fi lter $ 5.69901-07 Dry pick-up disc fi lter (3-pack) $ 5.79

610-50 10 Gallon stainless steel wet/dry vac $299.009034062 Hepa wet/dry cartridge fi lter $ 47.49

Dot Approved

Safety Cans

Available

Enamel Aerosol

Paint Available

Propane Filling

Station100 Lb. Propane Tanks Available For Rental

Over 100 Different

Brooms and Brushes

• 6000 LB. capacity

• 200 degree turning radius• Overload protection ball valve prevents

lifting loads beyond maximum height

Rental Rates (1495500PJ )


$35 $125 $315

27” x 48” Pallet Truck

$39900 PTW2748

Brown Jersey Gloves

$1175K324GM11 Price Per Dozen

White Dotted Knit Gloves

$975146I125

Price Per Dozen$$$$$$$$$$$$$$$$$$$$$HEAVY

DUTY

Kevlar® Gloves With Latex

ActivGrip Lite Glove

• 100% Kevlar® shell• Cut resistance level 4• Seamless knit construction

• Microfi nish™ Grip• Seamless cottonpolyester liner• Latex dipped• Twin pack• Available in blue also

857500 Leather Palm Gloves - Twin Pack $3.95

$107509K1300-L/XL

$89555AG317-L/XL

Nitrile Coated Glove With Safety Cuff

• Nitrile with Microfi nish grip• Seamless cotton liner, gray with safety cuff • Twin pack

y

$129556AG588-L/XL

• 6.5 Peak HP• Airfl ow: 185 CFM• Heavy duty suctionIncludes: 1-1/2” X 12’ economy lock on hose,

(2) 1-1/2” wands, 14” fl oor nozzle, blow molded

crevice, claw nozzle, high quality collection bag,

and ultra web fi lter

18 Gallon Wet/Dry Tough Poly Vac

$17900 9625310

Flashlights And Batteries

IN2-K 2 Cell D size industrial fl ashlight with krypton bulb $4.95IN3 3 Cell D size industrial fl ashlight $6.29ALAA-24 24 Pack “AA” Contractor Pack $11.50AL-AA or AAA 8 Pack “AA” or “AAA” cell alkaline industrial batteries $3.95AL-C 6 Pack “C” cell alkaline industrial batteries $5.75AL-D 6 Pack “D” cell alkaline industrial batteries $6.506V-HD 6 Volt heavy duty battery with spring terminals $2.95K2-2 or K3-2 Krypton high intensity bulb for 2 cell d-size or 3 cell d-size $3.00

25St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

CARPENTRY TOOLS

T500 5 Pc. T-shank assortment pack $9.50T101D 4” X 6 TPI fast cut wood - plastic $10.25T111C 4” X 8 TPI medium cut wood - plastic $7.00T101B 4” X 10 TPI hard and soft wood - plastic $10.25T119BO 3” X 12 TPI narrow curve cut wood - plastic $8.75T101AO 3” X 20 TPI fi ne cut wood - plastic $8.00T118BF 3” X 14 TPI wood with nails $14.00

• The most suitable blade made from carefully selected materials for every application

• World-wide market leader for jig saw blades• Compatible with DeWalt, Hitachi, Makita, and many others

Pro Series Circular Saw Blades With Case

Spade Bits

• Full cone threaded tip provides the speed needed to drill faster• Designed to answer the needs of professional users in terms of speed,

ease of use and hole quality.

DSB1001 1/4” Dare-Devil spade bit $2.75DSB1003 3/8” Dare-Devil spade bit $2.95DSB1005 1/2” Dare-Devil spade bit $2.95DSB1009 3/4” Dare-Devil spade bit $3.15DSB1015 1-1/8” Dare-Devil spade bit $5.25DSB5006P 6 Pc. Dare-Devil spade bit set 3/8” - 1” $21.95SBE1006 6” Spade bit extension for rapidfeed bits $4.54DSBE1012 12” Spade bit extension for rapidfeed bits $5.75

FB1600 16 Piece bit set with case ¼” thru 2-1/8” $135.00FB004 ¼” Forstner bit with 3/8” shaft $10.00FB008 ½” Forstner bit with 3/8” shaft $12.00FB016 1” Forstner bit with 3/8” shaft $17.50FB024 1½” Forstner bit with 3/8” shaft $27.75FB034 2-1/8” Forstner bit with 3/8” shaft $44.50

Call For Additional Sizes

Hammers And Saws

$257551-402 22 oz.

• Checker face design provides nail grip• Magnetic nail starter for one-handed nail setting• Head design for larger striking surface

Fatmax® Checkered Face Straight Claw

51-944 20 oz. Anti-vibe forged steel rip claw, smooth face $25.8551-947 20 oz. Anti-vibe forged steel rip claw, checkered face $29.10

15-087 20” Sharp-tooth saw 9 points per inch $21.8015-106A 6-3/8” Coping saw with 3 blades $7.2515-059 Replacement coping saw blades $2.35

$190015-335

• 50% faster than conventional handsaws• Resharpenable teeth • Comfortable select hardwood handle with special 45°/90° square/mitre

feature built in

20” Sharptooth™ Handsaw

$1305 46-123

• Durable etched, hard chrome plated blades• Scriber for easily marking surfaces• Easy read vial

12” Combination Square

$43510-509

• For cutting and trimming vinyl or linoleum fl oor covering, roofi ng and similar material

• Taper-ground cutlery steel blade permanently fastened to comfortable, hardwood handle

Linoleum Flooring Knife

$280016-970

• Heavy duty strike caps• Durable precision ground cutting edge• Width identifi cation on handle

3 Piece FatMax® Short Blade Chisel Set

16-971 6 Pc. Fatmax chisel set, 1/4” - 1½” with case $65.5016-980 1-1/2” Fatmax Wood Chisel $14.00

$85055-033

• Special extracting claw• Heat treated• Beveled nail slot

Nail Claw

55-035 11” Double end nail puller $13.93

$345555-099

• 4-in-1 tool for prying, splitting, board bending and striking jobs• Two-tiered jaws for grabbing common dimensional lumber & decking

Fatmax® Xtreme™ Fubar™ Functional Utility Bar

$112555-525

• Extra long length for extra reach and more leverage• Arch in center of bar gives more swing during nail pulling• Works as a panel lift

Super Wonder Bar Pry Bar

55-045 7” Wonder bar II pry bar $3.9855-102 24” Fatmax® wrecking bar $13.5555-104 36” Fatmax® wrecking bar $16.4555-136 36” Wrecking bar $9.2755-515 12” Stanley wonder bar $8.7555-818 17” Ripping bar $13.25

$625 58-501

• 1/32” and 2/32” included• Accepts conventional screwdriver bits• For setting unhardened nails

FatMax® Cushion Grip Interchangeable Nail Set

$209545-011

• Brace measures octagon scale• Board measures 2 way read sleeve• Surface protected to resist corrosion

Premium Aluminum Rafter Square

45-300 Aluminum carpenter square $10.0945-910 24” X 2” steel rafter/roofi ng square $10.25

46-131 16” Combination square $15.05

$1325 46-053

• Rafter layout square with our exclusive adjustable arm • Ideal for marking repetitive cuts accurately• Common/Jack and Hip/Valley scales

Premium Adjustable Quick Square® Layout Tool

$2925 20-531

• One piece durable, die-cast metal body for prolonged life• Thumb-dial adjustable tension mechanism with quick change features • 4-3/4” cutting capacity

Fatmax® High Tension Hacksaw

SDH1 1/8” - 1/2” Step drill with 1/32” increments $24.50SDH3 1/4” - 3/4” Step drill with 1/16” increments $44.00SDH9 13/16” - 1-3/8” Step drill with 1/16” increments $102.25

$82910-779

• Cushion grip surface for comfort, even in extreme temperatures• Slip-resistant grip helps prevent slipping, even on angled surfaces• Patented interlocking nose secures blade

5-3/8” Dynagrip® Retractable Utility Knife

10-499 6” Quick change retractable utility knife $7.0010-049 Pocket knife with blade lock $7.5510-099 3 Position retractable knife w/3 blades $5.0010-209 #199 Fixed blade utility knife $6.6011-041 Replacement knife blade for 10-049 $2.6011-921 Heavy duty utility blade 5 ct package $1.5711-931 Extra heavy duty utility blade 5 per package $1.7511-961 Hook blades 5/pkg .025 Thick blade $5.25

$590 21-399

• One handed tool• Ideal for end-grain work, sheetrocking and smoothing edges of laminates• Fitted with a replaceable fi ne cut blade

6” Surform® Pocket Plane

21-398 5-1/2” Surform® fi ne cut replacement blade $3.70

$2455 15-113

• Rugged design for heavy-duty use• Fully adjustable tension • Quick-release, blade-changing

mechanism in handle

12” High Tension Hacksaw

Jigsaw Blades

• All blades feature industrial quality, laser cut, fully hardened bodies

• Oversized carbide tips for resharpening.• Includes innovative reinforced textile

carrying case

PS740GP 7¼” 40 Tooth for cross cutting $41.95PRO1024RIP 10” 24 Tooth ripping $81.00PRO1040GPB 10” 40 Tooth general purpose $82.20PRO1050COMB 10” 50 Tooth combination $85.00PRO1080LAM 10” 80 Tooth laminate $124.00PRO1072VF 10” 72 Tooth vibration free $113.00PRO1260GP 12” 60 Tooth general purpose $115.00PRO1296VF 12” 96 Tooth vibration free $151.25

Forstner Bits

High Speed Steel Step Drill Bits

• Forstner bits bore perfectly smooth, fl at-bottomed holes in wood

• Ideal for drilling decorative holes used in fi ne woodworking and especially well-suited for severe angles and overlapping holes

• Fashioned from a chrome steel alloy

• Magnetic nail sta• Head design for

• Hea• Beve

j g g

S W d B• Extra long length for exex• Arch in center of bar gi• Works as a panel lift

• For cutco

• Brace measure• Board measure• Surface protec

• Self starting points start on contact• Balanced double fl ute design eliminates

chatter and vibration• Ideal for electrical, plumbing and HVAC

contractors• Ideal for draw bolt and miniature pilot light

holes

$323051-403

• Over-strike steel protection plate• Head designed for larger striking surface• Natural hickory wood handle

22 Oz. Fatmax® Over-Strike Framing Hammer

• 50% faster cutting speed• Induction-hardened teeth stay sharp 3-5 times longer• BladeArmor™ Coating with 2x more rust protection

15” Fatmax® Saw With Blade Armor™

y sharp 3-5 times longermore rust protection

$207520-046

t

Starting At

$2200 EACH



CARPENTRY TOOLS

Hole Saw

Kits600P 20 Pc. Plumbers hole saw kit $118.00600L 10 Pc. Electrician hole saw kit $125.001200G 17 Pc. General purpose hole saw kit $185.002000G 20 Pc. Big daddy 2000 hole saw kit $380.0030847 12” Extension for hole saws $20.50

5/8” to 6” Hole Saws In Stock

Reciprocating Saw Blades

20975 10” Handy hacksaw $12.8520116 12” X 18T hacksaw blade #218HE $2.35

VB3 1/4” - 3/4” Vari-bit $64.25VB2 9-16” - 1” Vari-bit $73.25VB12 7/8” - 1-3/8” Vari-bit $112.50VBX8 8” Extension for vari-bit $26.50

Gray Wolf Low Profi le Hack Saw Frame

Vari-Bit® Step Drill Bits

Powder Actuated Tools

.22 CALIBER SINGLE SHOT TOOL

$17900 PT22

• Fastener Length: 1/2 “ thru 3” (4” washered) • Engineered for continuous use, high reliability and low maintenance • Uses: furring strips, framing pins, electrical boxes, and ceiling clips

.27 Caliber Semi-Automatic Tool

$33500PT27

• Fastener Length: 1/2 “ thru 2-1/2” (3” or 4” washered) • Engineered for continuous use, high reliability and low maintenance • Uses: Acoustical ceilings, electrical applications, framing works, drywall

track

Loads And Pins

22C4 22 Caliber LV yellow crimped load $9.0022C3 22 Caliber LV green crimped load $9.00DP250 2-1/2” LV drive pins - 100 per box $8.75DPW250 2-1/2” LV pins with washer - 100 per box $13.75

Large Selection Of Pins And Loads Available • Quantity Discounts AvailableAuthorized Powder Actuated Tool Operators Exam Location

$29500PRO300SM25K

• Drives screws 1 1/2” to 3” in length • Makita 6.5 amp power unit, 2500 rpm • Fasten subfl ooring, stair treads, wallplates,

decks, docks, fi ber-cement siding.

$29500PRO300SM35K

• Drive a variety of 1-1⁄2” to 3” screws • Makita 3500 rpm power unit• Fasten subfl ooring, stair treads,

wallplates, decks, docks, fi ber-cement siding.

• Includes: extension, quiver, and case

QDPROLDHG2 Quik Drive tool for hardiboard 1-2”cap $133.25Large Assortment of Fasteners Available

FB11G 11.5” Titanium Glazer Pry Bar $119.75

TI14MC 14 oz. Milled Face With Hickory Handle $104.95AG102 8” X 2” Rubber handle wrap Stiletto “Cold-Shrink” $18.00AG180 18” X 2” Rubber handle wrap Stiletto “Cold-Shrink” $24.00

• 45% lighter than equivalent 28 oz. steel framing hammer• 10 times less recoil shock than steel• Virtaully unbreakable handle

Fiber Cement Board Tools

Turbo Shear Attachment For Cordless Drill

$6546 TS1

• Inserts into chuck of A/C or cordless drill• Navigates tight patterns and square cuts• 20 gauge capacity in galvanized steel

Turbo Shear FC Attachment For Fiber Cement

$16600 TSF1

• Inserts into chuck of A/C or cordless drill• Rated to cut 5/16” (8 mm) fi ber cement siding.• Straight shearing, precise arcs, fi ne trimming

Notcher For Fiber Cement Board

$4850 FCN

• Score and cut arcs up to 4” (10.16 cm) diameter.• Allows for plumbing, electrical, venting or other

outlets to pass through siding panel

Nail Cutter For Fiber Cement Board

$6800 SNC

• Cut up to 16D common nails • Flat head with beveled leading edge easily

maneuvers under edge of siding and into corners• Ideal for remodeling or salvaging projects.

Moulding Puller with Cushion Grip

$1195 MP250G

• Precision thin blade for removing moulding without damaging the wall

• 10 oz. head weight• 10” overall length

Pro Claw Nail Puller with Cushion Grip

$1275 PC250G

• Pro claw end assures easy nail removal• 10 oz. head weight• 10” overall length

18” Lightweight I-Beam Construction Pry Bar

$1995 PB-18

• I-Beam construction gives added strength while removing weight• Rocking head provides maximum leverage• Beveled nail slot

20 oz Curved Claw Hammer

$3085 E3-20C

• Nylon vinyl grip• 13-1/2” length• For driving and removing nails

E3-16C 16 oz curved claw hammer nylon/vinyl grip $26.75E3-16S 16 oz straight claw hammer nylon/vinyl grip $26.75E3-20S 20 oz straight claw hammer nylon/vinyl grip $30.85E3-22C 22 oz large handle curved claw hammer $37.75E3-22CMR 22 oz mill face curved claw hammer $39.25E3-24S 24 oz straight claw hammer $38.50

Sold By The Pack - Call For Sizes

$20505012

$4200VB1 1/8” - 1/2”

Pins And Loads

Sold Separately

Pins And Loads

Sold Separately

11.5” Titanium Nail Puller With Dimpler

15” Titanium Flat Pry Bar

14 oz. Smooth Face Finish Hammer w/ Curved Handle

16 oz. Milled Face With Fiberglass Handle

15 oz. Milled Face Tibone Framing Hammer

$8875 TICLW12

$16975 FB15

$8995 FH10C

$12195 TI16MCP

$26250 TB15MC

p g nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnngg.gggg.g.gg.g.ggg.gg.gg.ggg.g.ggggg.gg.ggggg.ggggg.gggggggggggg.ggg.gggggg.gggg.ggg..ggggggggggggggggggggggng

ement Boardmeter.

other

ners

Other Sizes Available

Drill Not Included

1500 Series I-Beam Level

1550 Series I-Beam Level With Magnetic

• Dual chamber design• Plumb Site® off ers dual-sides MagnaVials™

and wide top read window for easy, accurate readings

• Dual chamber design• Plumb Site® off ers dual-sides MagnaVials™

and wide top read window for easy, accurate readings

• Rare earth magnets

1794105 24” 1500 series aluminum I-Beam level $24.751794107 48” 1500 series aluminum I-Beam level $34.501794109 72” 1500 series aluminum I-Beam level $51.50

1794106 24” 1550 series aluminum I-Beam level with magnets $28.751794108 48” 1550 series aluminum I-Beam level with magnets $42.75

AHEEEHAPDNJHHBEOLKKNOMFHAGBPOPAHEEEHABNFFFNBPNHMKJPNGBKBGBHJHBPBOAPBNFFFNBKALJKKFEFFDGHKNFHEHCPLFCOBNJNHMKINPEAFHJLMMFHDOHKMMMPBIFHOKMDOJJJDAGBOMKGNNCKLALFHMEJCCNCCOGDDABEIIFHBBPHKGIDOEIICEFNFBJNDMDCNPMGNGKPCLGDAAIFFCDEBJMHIJNHFFIOCGMHIGLPDOBNFPLHPBMBLDAPKIBFMFFFNFEHBHLKLPDAMGBOONAIHFDMAHFHAANPFAPBBBPAPOIOABMMBNCBEOHOLKHGGDGDFGOBDMHHHHHHHPPHPHPHPPPHPPPPPHHPPPHPPHHHPPH

27St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

HAND TOOLS AND EQUIPMENT

20 oz Regular Fiberglass Rip Claw Hammer

$1775 11-418

• Virtually unbreakable fi berglass handle • Factory balanced for maximum striking power • New grip material reduces handle slickness

24 oz Fiberglass Brick Hammer

$1750 11-428

• Fiberglass handle with comfortable cushion grip• Permabond® construction between head and handle • 1 1/8”- wide bit

24 oz Fiberglass Ball Pein Hammer

$2395 11-421

• Rust-resistant, forged black head with polished poles and peins • Permabond® construction between head and handle • Comfortable black cushion grip

11-400 20 oz premium fi berglass curve claw hammer $19.2511-402 16 oz premium fi berglass curve claw hammer $17.8511-415 16 oz premium fi berglass rip claw hammer $17.8511-416 22 oz premium fi berglass rip claw hammer $23.2511-422 15 oz fi berglass brick hammer $23.75

• Quick-Change jaw quickly converts from clamp to spreader

• Exerts up to 250 lbs. of clamping pressure

• Non-marring pads grip fi rmly and protect work

506QC 6” Quick grip bar clamp w/bar spreader $20.25512QC 12” Quick grip bar clamp w/bar spreader $23.50524QC 24” Quick grip bar clamp w/bar spreader $29.0040104 4 Piece accessory kit $9.55

2-1/4” Quick Adjusting Pipe Wrench• One-handed operation • Ratchets quickly to work surface • 43% less weight than standard 14” cast iron pipe

wrenches

49-56-0505 1/4” Diamond Plus™ Hole Saw $24.0049-56-0507 5/16” Diamond Plus™ Hole Saw $25.0049-56-0509 3/8” Diamond Plus™ Hole Saw $27.0049-56-0511 1/2” Diamond Plus™ Hole Saw $30.0049-56-0513 5/8” Diamond Plus™ Hole Saw $34.0049-56-0515 3/4” Diamond Plus™ Hole Saw $38.00

$2550 274001

• Easy-spin adjusting nut is heat-treated for durability

• Hardened teeth provide tremendous bite • Housing constructed of heavy-duty cast iron

• 16” Hickory handle• Punch diameter: .075”

24606 41 Pc tap and die super set $139.0026317 41 Pc tap and die set $157.7526376 76 Pc. Metric & sae tap and die set $290.00

Taps And

Dies

• Wide capacity jaw • Wider handle provides more comfort

and less stress to the hand • Alloy steel and heat treated

AC-18V 8” Adjustable crescent wrench - 1-1/8” jaw $17.50AC-110V 10” Adjustable crescent wrench - 1-5/16” jaw $22.50AC-112V 12” Adjustable crescent wrench - 1-1/2” jaw $33.00AC-115 15” Adjustable crescent wrench - 1-11/16” jaw $53.25AC-118 18” Adjustable crescent wrench - 2-1/16” jaw $95.00AC-124 24” Adjustable crescent wrench - 2-7/16” jaw $162.25

49904 1/4” Wood auger bit $11.0049905 5/16” Wood auger bit $11.0049906 3/8” Wood auger bit $11.0049907 7/16” Wood auger bit $11.0049908 1/2” Wood auger bit $11.1049909 9/16” Wood auger bit $11.1049910 5/8” Wood auger bit $11.1549911 11/16” Wood auger bit $11.4549912 3/4” Wood auger bit $11.9549913 13/16” Wood auger bit $13.1549914 7/8” Wood auger bit $13.7049915 15/16” Wood auger bit $14.3549916 1” Wood auger bit $14.75

• Quick change mechanism allows for easy blade removal without opening the knife

• Three-position slide provides increased durability for frequent use• Includes 6 IRWIN BLUE BLADE™ Bi-Metal Utility Blades

Protouch Retractable Utility Knife

$1255 2082200

$5750 46284

19” Forged Alloy Nail Puller

• Box-joint, forged alloy, hardened and tempered jaw • Jaw capacity 16 penny nail

• 7-1/4” 24T Framing Carbide Thin Kerf• Anti-stick coating reduces friction and gum-up• Ribbed heat vents allow blade to run cooler

Circular And Miter Saw Blades

DW7763 6-3/4” 40T metal-cutting carbide-tipped blade $55.95DW9152 6-1/2” 36T aluminum cutting blade $31.80DW9154 6-1/2” 24T carbide blade (framing) $20.60DW9155 6-1/2” 18T carbide blade (fast cutting) $20.31DW3182 8-1/4” 24T carbide framing circular saw blade $14.55DW7747 14” 70T heavy gauge ferrous metal cutting blade $218.55

Contractor Bit SetsDW2169 38 Pc. Hex bit set with magnetic bit holder in case $59.38

Power Drill I-100 Auger Bits

Cast Iron Pipe Wrenches

One-Handed Bar Clamps/Spreader

Chrome Finish Adjustable Wrneches

Flat-Steel Fish Tapes

1/8’’ Wide Steel Fish Tape - 125’

• High strength spring steel• Laser etched markings in 1’ increments• Unique sloped handle optimizes hand position

for quick hand-over-hand rewinds.

$5650 56003

Hex Key Wrench Sets

3/16” - 3/8” Five-Key Inch Folding Hex-Key Set

• Handy sets fi t your pocket or tool box easily and help eliminate the lost-key problem.

• Tough, heat-treated alloy steel.• Hex-key ends are square-cut for a secure full-

depth fi t and maximum contact

$1125 70579

70583 3/32” - 1/4” Eight-key inch folding hex-key set $11.2570591 5/64” - 1/4” Nine-key inch folding hex-key set $9.25

1150300 1” Diameter back-out punch with 16” hickory handle $33.95

48-22-3069 6 in 1 Combination pliers, 1-1/2” jaw capacity, wire stripper, bolt cutter and pipe reamer $33.50

3/4” Diameter Heat-Treated Back-Out Punch

$3175 1150000

p

• Box-joint, forged alloy, hardened and tempe• Jaw capacity 16 penny nail

• Virtually unbreakable fi berglass handle• Factory balanced for maximum striking• New grip material reduces handle slick

• Comfortable black cushion grip

y

d for

bite ast iron

As Low As


DW3578

See Page 23 and 24 For More Masonry Tools

$95552361-20

M18™ LED Flood Light

• Flood Light provides 1,100 lumens and up to 1,300 lux• Up To 30% brighter than corded 250 halogen lights• Up To 8 hours of run-time

$245548-22-5125

25’ Magnetic Tape Measure

Diamond Plus Hole Saws

• Diamond Plus™: Greater durability and toughness delivers up to 10X longer life

• Designed as the single cutting solution for all tile, stone, and glass applications

• Diamond Plus™ off ers the lowest cost-per-hole on the market.

• Up to 9’ Standout• Blueprint Scale - Calculates 1/4” and 1/8”

Drawings• 5-Point Reinforced Frame

274101 10” Cast iron pipe wrench $19.50274106 12” Cast iron pipe wrench $24.50274102 14” Cast iron pipe wrench $25.25274103 18” Cast iron pipe wrench $31.75274104 24” Cast iron pipe wrench $45.50274107 36” Cast iron pipe wrench $93.75



HAND TOOLS AND EQUIPMENT

1-1/8” Tubing Cutter

$3850 TC118

• 1⁄8” - 11⁄8” Tube diameter range• Four roller tracking system• Cleanly and easily deburr pipes

6IN1 Combination Pliers

10IN1 ECX™ Multi Bit Driver

$3355 48-22-3069

$1655 48-22-2101

• Pipe Reamer - up to 1-½ ”• Bolt Cutter - Thread and cut #6 and

#8 bolts• Wire stripper - Strip 10 - 18 AWG solid

wire and 12-20 AWG stranded Wire

• 3-½ ” Power Groove Bits for power tool compatibility• Up to 10ga Wire Stripper and Loop Maker• Magnetic bit retention• Wrench Ready™ HEX shanks

4½” Utility Workshop Vise With Swival Base

$9900 674

• Heavy-duty 30,000 PSI casting for strength and durability• Built-in pipe jaws handle various pipe sizes• Perfect for general clamping applications

3” C-Clamp

$1150 540A-3

• Frames made from high strength ductile iron castings

• Sliding pin (vise type) handle, single acme thread rolled spindle and oscillating ball and socket tip

Utility Workshop Vises

675 5½” Utility workshop vise with swival base $125.00676 6½” Utility workshop vise with swival base $165.00

Carriage C-Clamps

540A-4 4” C-clamp $16.50540A-6 6” C-clamp $23.75540A-8 8” C-clamp $32.50540A-10 10” C-clamp $38.95

• 2 way loading via cartridge or suction• Holds 3 oz. grease cartridge• 4” steel extension included• Maximum pressure 3000 PSI

$2150 180G

Grease Guns

NATIONAL SPENCER

• Maximum pressure 5000 PSI• Holds 14 ½ oz. cartridge• Delivers 1 oz. per 40 strokes• Multiple loading via cartridge, suction or bulk

$2975 613

Mini Pistol Grip Grease Gun

10035 3 oz grease cartridge - 3 pack $8.50

Zinc Plated Pistol Grip Grease Gun With 12” Hose

HD4A Lever style grease guns variable stroke $33.2512-R 12” Grease gun hose, 3000 psi, 1/8” npt $5.9518-R 18” Grease gun hose, 3000 psi, 1/8” npt $6.99609 14 oz. Multi-purpose grease $4.50

• Ideal for tightening, clamping, twisting and turning• Curved jaw puts tremendous pressure on four points of

any style nut or bolt head• Stays adjusted for repetitive use

$1275 10WR 10”

Locking Pliers

The Original™ Curved Jaw Locking Pliers with Wire Cutter

4WR 4” Curved jaw vise grip with wire cutter $10.755WR 5” Curved jaw vise grip with wire cutter $11.757WR 7” Curved jaw vise grip with wire cutter $13.25

• Long, straight nose provides easy access in narrow, hard-to-reach places.

• Ideal for tightening, clamping, twisting and turning• Hardened teeth are designed to grip from any angle

$1375 6LN

The Original™ Long Nose Locking Pliers

• Wide-opening jaws provide greater versatility in clamping a variety of shapes

• Constructed of high-grade heat-treated alloy steel• Stays adjusted for repetitive use

$1275 6R 6”

The Original™ Locking C-Clamps With Regular Tips

11R 11” Locking C-clamps with regular tips $19.5118R 18” Locking C-clamps with regular tips $30.859R 9” Locking Welding Clamp $23.50

• Wide-opening jaws provide greater versatility in clamping a variety of shapes

• Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface

• Stays adjusted for repetitive use

$12504SP 4”

The Original™ Locking C-Clamps with Swivel Pads

6SP 6” Locking C-clamp with swivel pads $14.2511SP 11” Locking C-clamp with swivel pads $22.9518SP 18” Locking C-clamp with swivel pads $32.45

• Makes bending, forming, and crimping jobs easier• Turn screw to adjust pressure and fi t work.• Constructed of high-grade heat-treated alloy steel

$1950 8R 8”

The Original™ Locking Sheet Metal Tools

01687 12/3 25’ Polar/solar outdoor extension cord $30.9501688 12/3 50’ Polar/solar outdoor extension cord $48.9501689 12/3 100’ Polar/solar outdoor extension cord $87.50

02589 12/3 100’ Vinyl outdoor extension cord $55.55

025490052 12/3 100’ Green/Yellow Striped Extension Cord $97.75025490077 12/3 100’ Pink/Green Striped Extension Cord $97.7502548USA1 12/3 50’ Red/White/Blue Striped Ext Cord $37.5502549USA1 12/3 100’ Red/White/Blue Striped Ext Cord $57.55025490041 12/3 100’ Red/White Striped Extension Cord $97.75

• The no-slip ProTouch™ grip provide comfort and leverage• Ideal for tightening, clamping, twisting and turning• Constructed of high-grade heat-treated alloy steel

$1250 10R 10”

The Original™ Straight Jaw Locking Pliers

9LN 9” Long nose locking pliers $16.50

48-22-4108 8” 6IN1 Diagonal Pliers $28.00

48-22-2113 11IN1 Screwdriver, wire stripper, wire bender hole $14.75

• Heavy-duty jaw grips around work of all shapes; ideal for plumbers, mechanics, welders, and others working with large objects

• Ideal for tightening, clamping, twisting and turning• Constructed of high-grade heat-treated alloy steel

$2050 12LC 12”

The Original™ Large Jaw Locking Pliers

6BN 6” Bent nose locking pliers with wire cutter $17.707LW 7” Vise Grip locking wrench 7/16”-3/4”/11mm-19mm $14.50

12/3 50’ Polar/Solar Plus™ Outdoor Extension Cord

$3795 04-00102

$9995 07538

• 20 Amp GFCI rating• 12/3 gauge • 3 outlets, 3 ft. length

• Durable outdoor/indoor lighting systems• Accommodates A-23 bulbs up to 150 watts • UL Listed• NEC Compliant • Meets OSHA Requirements

10/3 50’ Polar/Solar Plus™ Outdoor Extension Cord

$8500 01788

$3055 02588 50’

Polar/Solar Plus Outdoor Extension Cords

12/3 Vinyl Outdoor Extension Cords

12/3 Striped Outdoor Extension Cords

GFCI Power Block Adapter w/Lighted Power Block

12/3 50’ Cord-O-Lite Temporary Light Strings

• Features a power indicator light in the female receptacle• Lightweight and stays fl exible to -67°F. • Meets OSHA requirements for Outdoor use.

• Resists moisture, abrasion and prolonged exposure to sunlight• UL/cUL/ETL Listed / Meets OSHA requirements forOutdoor use• Outer jacket won’t mark fl oors or walls

• Clear molded plugs with power-indicator light in female end

• Reinforced blades help prevent accidental bending or breaking

• UL Listed /CSA Certifi ed / Meets OSHA requirements for Outdoor use

01789 10/3 100’ Polar/solar outdoor extension cord $150.0003482 2’ Tri-source 12/3 polar solar tri-tap pwr cord $15.2504422 6’ Quad connector with 4-way block 12/3 $29.7509856 9’ 16/3 Replacement power cord grounded $8.95

1655

getic bit retentionch Ready™ HEX shanks

p

acle

Easily Identify Your Cords

On Any Job Site

MADE INUSA

MADE INUSA

MADE INUSA

29St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

• Tool-free depth changes • Drives 2” to 3-1/2” strip nails• Dual mode trigger - single or rapid cycle

FASTENING TOOLS & EQUIPMENT

• 5.5 HP Honda engine• 9 gallon capacity• 8.9 CFM delivered at 100 PSI

$93900 4090HK17 (4090-H)



$25 $85 $215

Belt-Drive Compressors

6590HMK13S 6.5 HP Honda engine, 9 gal., 13.1 CFM $1179.005715 1-1/2 HP electric, 9 gal., 6.9 CFM $799.005520K17 1-1/2 HP electric, 20 gal., 6.9 CFM $950.00

• Single stage compressor• 2 HP electric motor• 4.0 CFM delivered at 100 PSI

$32500 D2002HPV5

Direct-Drive Compressors

• Single stage compressor• 2 HP electric motor• 4.1 CFM delivered at 100 PSI

$24900 FC2002

GD4000PV5H 4 HP Honda engine, 4.5 Gallon, 4.4 CFM $730.00

FC2002HBP6 2 HP electric motor, 4.0 CFM, on 2-wheel cart $259.00

• Fold-Down Handle for Easy Storage/Low Profi le• 2.5 HP, 3400 RPM electric motor• 6.5 CFM delivered at 90 PSI

$39900 VT25BIG

Ramguard Pins For ACQ Treated Lumber

• Single stage compressor• 1.5 HP electric motor• 3.6 CFM delivered at 100 PSI

$18500 FC1500HBP2

Framing Strip Nailer - 50th Anniversary Edition

$27900 511990 MODEL F350S

• Adjustable depth of drive• Drives 1-1/2” to 2-1/2” fasteners• Heat treated fasteners• Lightweight and Compact

Rental Rates (500570 or 500855)


$35 $125 $315

Positive Placement Framing Nailer

$30955 511800 MODEL PF250S-PP

• No-Mar Tip and Quick Clear• Nail range 5/8” to 2”• Adjustable depth of drive

18 Gauge Brad Nailer

$11900 500959 T200-F18

• Shoots standard F-16 fi nish nails• Nail range 3/4” to 2-1/2”• Adjustable depth of drive

16 Gauge Finish Nailer

$16900 501680 T250S-F16

• Lightweight, yet durable, for more comfort and control

• Fastener range 1-1/4” to 2-1/2”• New Li-ion Battery - provides 50% longer run time



$30 $105 $265

Cordless 16 Gauge Angled Li-ion Finish Nailer

$36900 902400

• 1 Hour Rapid Charger: 80% charge in only 20 min.• No-mar tip ensures undamaged trim surfaces• Drives 1-1/4” to 2-1/2” fi nish nails

16 GA STRAIGHT CORDLESS LI-ION FINISH NAILER

$26955 916000

• Adjustable depth of drive• Drives 5/8” to 2” fi nish nails• Quick clear nose

Cordless 18 Gauge Finish Nailer

$25900 901000

• 50% more nails per charge (up to 6,000 nails)• New depth of drive adjusts on the fl y• Drives 2” to 3-1/4” fasteners

Li-ion Cordless Framing Nailer

$39955 902600P MODEL CF-325LI



$35 $140 $350

• Portability and convenience with no set-up time• Stapler range 3/4” to 2”• Quick-clear feature

• Staples and Caps in one easy step• High capacity canister - holds 240 caps per reel

and 90 staples

Cordless 16 Gauge Utility Stapler

CS150 Cap Stapler

$42900 900078 MODEL IM200S16

$26900 502575 MODEL CS150

Authorized Service Center

• Innovative fi rst-of-its-kind angled pneumatic nailer

• Nail range 1-1/4” to 2-1/2”• Adjustable depth of drive

16 Gauge Angled Finish Nailer

$18500 500910 T250A-F16

501270 S150-W16R wide crown roofi ng stapler $269.00501260 S150-N18 narrow crown 1/2” to 1-1/2” stapler $325.00

Rental Rates (501230 Stapler)


$25 $85 $215

• 10 Shot strip loads• Semi-automatic• 2-1/2” pin capacity (3” w/washer)

27 Caliber Strip Load Stud Gun

2.5 HP Electric Wheeled Air Compressor

$53800 SA270• 10 Shot disc load

• Semi-automatic• 2-3/8” pin capacity (2-1/2” w/washer)

• 1000 Pins per box• Shank diameter = .145 • Head diameter = .300

25 Caliber Disc Load Stud Gun

$45650 D60

• 3 - 5 times faster than regular stud guns• The tool absorbs all recoil for less operator

fatigue• 1/2” to 1-1/2” fasteners

Trakfast Stud Gun

$86400 TF1000/TF1200

Rental Rates (SA270)


$25 $75 $225

FPP034B Trakfast 3/4” pins w/ fuel cell, 1000 pins $89.25FPP114T Trakfast 1-1/4” pins w/ fuel cell, 1000 pins $135.00

1516SDE 2-1/2” Coated drive pin for ACQ treated lumber w/washer $25.50

1524SDE 3” Coated drive pin for ACQ treated lumber w/washer $25.50

Large SelectionOf Concrete

Anchors

Expansion AnchorsScrew Anchors

Bolt & Shield AnchorsRod Hanging Systems

Impact AnchorsPin Anchors

• Heavy duty wear plates• Stapler range 3/4” to 2”• Applications: Sheathing, Decking, and

Vinyl siding

Standard Crown Framing Stapler

$24900 501230 MODEL S200-S16

Large Selection Of Nails ForPaslode, Porter Cable, DeWalt,

Bostitch and Hitachi Nailers

SI



FASTENING TOOLS

• High-capacity magazine reduces reload time• Precisely drives L-shaped fl ooring cleats • Mallet included

• Dial adjustable depth control• Full round driver • Applications: Asphalt shingles, siding, box

assembly, and metal to plywood

• Dial adjustable depth control• Compact design only 12-1/2” in height• Applications: Framing, sheathing, sub fl ooring,

decking, siding and crafting

Flooring Cleat Nailer3/4” - 1-3/4” Roofi ng Coil Nailer

2” - 3-1/2” 34 Degree Clipped Head Stick Nailer

$61900 MIIIFN$21100

CN445R2

$24900 SN890CH2/34

Visit Our Website For More Nails And Staples

Rental Rates (MIIIFN)


$35 $140 $350

0090AC 18” Series 2000 bolt cutter 3/8” capacity $52.500190AC 24” Series 2000 bolt cutter 7/16” capacity $71.500113AC 24” Replacement cutter head for series 2000 $32.25

IRON WORKERS TOOLS

• Breathable AntiJam™ magazine• Patented easy squeeze mechanism• 1/4” - 9/16” fasterners (STCR5019)

Heavy Duty PowerCrown™ Tacker

$2675 T6-8

• Clear staple jams without use of tools• Quick-load magazine• 1/4” - 3/8” fasterners

Powercrown™ Hammer Tacker

$4195 H30-8

• AntiJam™ design for maximum productivity• 1/4”-1/2” STCR5019 PowerCrown™ staples• Extra wide foot plate prevents tearing and marring

Powerslam™ Professional Hammer Tacker

$5900 PC2K

Rental Rates (MIIIFS)


$35 $140 $350

• Drop-forged jaws with center-cut blades • Cuts soft, and medium/hard materials • Toggle joints turn 50 lb hand pressure to 4000

lb of cutting pressure

14” General Purpose Center Cut Bolt Cutter

$4600 1490AC 5/16” CAPACITY

• Fastrac ratchet suspension• Meets or exceeds the applicable

requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1-2003, Class G (electrical, low voltage).

$9850 475407 NATURAL TAN

Skullgard Protective Headwear

0390MCX 36” Heavy duty bolt cutter 7/16” capacity $235.000590MCX 42” Heavy duty bolt cutter 1/2” capacity $258.75

• Recommended for the most demanding hand cutting applications • Maximum hardness of material to be cut: Brinell 455/Rockwell C48 • Toggle joints turn 50 lb hand pressure to 4000 lb of cutting pressure

24” Heavy Duty Center Cut Bolt Cutter

$15925 0190MCX 5/16” CAPACITY

Tool Holders And Bags

5459T Leather erection wrench holder $19.255107-9 Leather plier holder for 9” side cut pliers $23.255109 Wide opening straight wall canvas bucket $43.505113 Tapered wall canvas bucket $46.415118C Leather 4 pocket tool holder $62.505119 4 Pocket tool pouch $20.255139 Canvas zipper bag 7” x 12-1/2” $10.255417T Leather bull pin holder with tunnel loop $18.095458 Snap loop with snap hook $11.505461T Erection wrench holder $19.855471 Canvas electrode bag $18.75

Bolt Cutters And Rebar Hickeys

63314 14” Bolt cutter–steel handles-3/16” to 5/16” cap. $111.5063318 18” Bolt cutter–steel handles-1/4” to 3/8” cap. $115.5063324 24” Bolt cutter–steel handles-5/16” to 7/16” cap. $143.7563330 30” Bolt cutter–steel handles-3/8” to 1/2” cap. $159.8563336 36” Bolt cutter–steel handles-7/16” to 9/16” cap. $202.5063342 42” Bolt cutter–steel handles-1/2” to 11/16” cap. $277.5064306 Grizzly® bar - form stripper crow bar 55½” $96.8564309 Rebar hickey, bends #3&#4 rebar, 65° & 90° angle $146.5064310 Rebar hickey, bends #5 rebar, 65° angle $135.8564311 Rebar hickey, bends #6 rebar, 65° angle $155.5064312 Rebar hickey, bends #7 thru #9 rebar, 65° angle $223.75

Tie Wire Reel

27400 Aluminum tie wire reel $47.5027450 Leather tie-wire reel pad $16.25

Drift Pins, Wrenches And Connecting Bars

3260 11/16” Barrel-type drift pin $6.853262 15/16” Barrel-type drift pin $7.853255 1-1/4” Broad-head bull pin $24.753256 1-1/16” Broad-head bull pin $23.953248 7/8” X 30” round connecting bar $50.753247 3/4” X 24” round connecting bar $37.503246 7/8” X 36” round connecting bar $54.653245 3/4” X 30” round connecting bar $44.003210 1/2” Erection wrench, for u.S. Heavy nut $36.503212 3/4” Erection wrench, for u.S. Heavy nut $41.503222 3/4” Erection wrench, for u.S. Regular nut $42.953239 Adjustable-head construction wrench $82.95

Side Cutter Pliers

213-9ST 9” Ironworker’s work pliers $39.95D2000-7CST 7” Ironworker’s work pliers $48.85D2000-9NE 9” High-leverage side-cutting pliers $43.85D2000-9ST 9” Hi leverage ironworker’s work pliers $51.85D201-7CST 7” Side cutting pliers $39.50D213-8NE 8” High-leverage side-cutting pliers $34.50D213-9NE 9” High-leverage side-cutting pliers $33.95D213-9ST 9” Hi leverage ironworker’s work pliers $39.50D2207 7” HD diagonal-cutting pliers-tapered nose $29.95D502-10 10” Pump pliers $23.75

• Large zipper pocket to secure small parts and tools.• 20 pockets for greater tool storage• Shoulder strap with extra padding and handles for easy

carrying

Tradesman Pro 8” Tote

$2955 554158

• Load rated 150 lbs. (68 kg)• Top of bucket zips closed.• 14’’ diameter accommodates

standard 5 gallon bucket.• Body constructed of heavy-duty

No. 1 canvas.

17” Heavy Duty Top Closing Bucket

$11695 5104CLR17

FLN200 2” Flooring cleat $29.50CN70433 Vinyl Siding Attachment for CN445R2 $73.75

CN5655 1-1/4” - 2-1/2” Siding Coil Nailer $366.00

MIIIFS Flooring Stapler $619.00BCS1516 2” Galvanized staples $89.00

• 5/8” cutting capacity• Grade 60 capacity• Mounted on board

5/8” Rebar Cutter And Bender

$38900 MBC16B

Gift CardGift CardBUILDING MATERIALS • CONSTRUCTION EQUIPMENT • CONCRETE SUPPLIES

Great For

Incentive

ProgramsCall For Details

475395 Skullguard “Cap” Hard Hat w/Fastrac Ratchet Suspension $106.00 5104CLR22 22” Heavy Duty Top Closing Bucket $125.50

31St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

CONSTRUCTION EQUIPMENT

• 3.4 HP GX 100 Honda engine• 3642 lbs. impact force• Max compaction depth 26 inches

BT65/4

Rental Rates


$50 $175 $405

• 3.5 HP GX 120 Honda engine• 2250 lbs. Centrifugal force• 82 ft/min. max working speed

• 4.8 HP GX 160 Honda engine• 4050 lbs. Centrifugal force• 82 ft/min. max working speed

• 15.2 hp Hatz engine• 18000 lbs. Centrifugal force• 92 ft/min. max working speed

$158900 BVP10/36

$163900 BVP18/45

BPH80/65S

Plate Compactors

Rental Rates


$50 $175 $405

Rental Rates


$200 $740 $1850

• Kubota 905 23 HP liquid cooled engine• Hydrostatic drive• 8’4” digging depth

Tractor With

Loader

Rental Rates (TLB225)


$175 $615 $1550

• Four 1250 watt metal halide lights

• 7.5KW generator• 360 rotation

Rental Rates (NLPRO II V)


$115 $335 $795

• 13 HP Honda engine• 16 cu.ft. tub capacity• Hydrostatic drive

Rental Rates (OMPB16)


$75 $275 $695

POWER BUGGYS

Towable 33’

Light Tower

$925000 OMPB16

OMPB16E Power buggy with electric start $8750.00

PRESSURESUPPLY INC.

• 2500 PSI, 3 GPM• 6.5 Honda engine• 50 ft. steel wire braided hose• Stainless steel frame

$91500 PE2565HWSCOM

Rental Rates (3513HWBSGENS)


$70 $255 $645

• 1100 PSI, 2.0 GPM• 1.5 hp Baldor electric motor• 30 ft. hose with 36” wand

$80000 1115EW1COM

Gas Powered Pressure Washers

• 4000 PSI , 4.0 GPM• 13.0 HP Honda engine• 50 ft. hose with 36” wand• Stainless steel frame

$112900 PE4013HWPSCOMZ• 3500 PSI, 4.0 GPM• 13.0 HP Honda engine w/ low oil shutdown• 50 ft. hose with 36” wand• Stainless steel frame

$176000 CD-3513HWBSGEN

Electric Powered Pressure Washer

Accessories

• 30.1 cc engine• 16” bar and chain• Quick chain adjustment

$19999 MS171-16

Rental Rates (MS290-18)


$50 $175 $360

• 130 CFM• 3 cylinder diesel• 100 PSI working pressure

Rental Rates (PDS130S)


$75 $250 $625

130 CFM Air Compressor

Rental Rates (PDS185S)


$95 $335 $850

Rental Rates (PDS400)


$165 $575 $1450



• 55.5 cc engine• 18” bar and chain• Adjustable automatic bar and

chain oiler

$49999 MS291-18

Wood Boss

• 27.2 cc engine• 417 CFM air volume w/tubes• 140 MPH air velocity

• OSHA Class 2 refl ective• Highly visible at 55 mph• Made of specialized Avertic Pro by Engtex

cut-retardent material designed to stop a chain saw

$14999 BG55

$13299 701088408

Rental Rates (BR550)


$45 $160 $400

• 64.8 cc, STIHL 4-mix engine• 530 CFM air volume w/tubes• 199 MPH air velocity

$44999 BR550

1/2” Gas Wood Drill

Chainsaws

Blowers

Hi-Viz Yellow 9 Ply Performance Chaps

• 27.2 cc engine• 1” X 18” wood bit capacity• 2 speed gear box

$49999 BT45

• 1” NPT inlet and outlet• 26 cc Koshin K26 engine, 2 cycle engine• 29 GPM, 26’ maximum lift

$28500 SEV-25L

1” Dewatering Pump

• 2” NPT inlet and outlet• 5.5 HP GX160 Honda engine• 185 GPM, 26’ maximum lift

$96000 KTH50X

• 2” NPT inlet and outlet• 4.0 HP GX120 Honda engine• 150 GPM, 26’ maximum lift

$54400 STH50X

2” Trash Pump

Semi-Trash Pumps

See Page 8 And 23 For More Stihl

KTH100s 4” Trash pump 541 GPM, No Strainer $1932.40

85400061 16” Water broom for pressure washers (4 tips) $33.0085205024SHD 24’ Super heavy duty ext. wand with harness $163.502000WAWS 20” Stainless steel Whirl-A-Way $550.00

/4

d engingggggg e

es

y

Bit Sold Separately

4-Cycle Rammer

Remote Controlled Reversible Vibratory Plate

Don’t Forget The

Suction and Discharge

Hoses

16 Cu. Ft. Electric Power Buggy

FinancingAvailable

• Quiet and emmission free for interior operation• Maximum load 2500 lbs• Hydrostatic drive• Variable hydraulic dump• Full charge average run time of 5-7 hours at

continuous use at 50% loaded/unloaded cyclet ycle

Rental Rates (IEPB16)


$165 $575 $1,450

$17,95000 IEPB16



CONSTRUCTION EQUIPMENT

Trash Pumps

$338900 BS602I

$176000 DH1020VC

$179955 BH2770VCD

$139955 BH2760VCB

$99955 11335K

• 5.5 HP Honda engine• Large capacity water tank• For compaction of granular materials

and mixed materials

• 35 HP Isuzu engine• 20 kW standby output• Ideally suited for construction sites

where durability, reliability and fl exibility are required to supply continuous power

Rammer

$214900 WP1550AW

Price On Request G25

Plate Compactor

25Kva Tow Behind Generator

Rental Rates (BS602I)


$50 $175 $405

• 3 HP engine• Oil injected• 3025 lb. force

• 17 ft. lbs impact energy - Best in Class• 850 - 1,800 No Load BPM• 15 amp

• 47 ft. lbs impact energy - Best in Class• 1,000 No Load BPM• 15 amp, 120V

• 49.5 ft. lbs impact energy - Best in Class• 50% less vibration than the 11304• 15 amp, 120V

• 34 ft. lbs impact energy • 1,300 No Load BPM• 15 amp

• 5.5 HP Honda engine• 2500W max output• Low oil shut-off

$120500 GP2500A

• 11 HP Honda engine• 5600W max output• Includes wheel kit

$214900 GP5600A

• 8 HP Honda engine• 425 GPM discharge• Self priming high performance pumps

for water and solids

$159900 PT3A 3” CENTRIFUGAL

RENTAL RATES (WP1550AW)

DAILY WEEKLY MONTHLY

$50 $175 $405• 5.5 HP Honda engine• 205 GPM discharge• Self-priming high performance pump

capable of handling solids up to 1 inch

$134900 PT2A 2” CENTRIFUGAL

Portable Generators

• 8 HP Honda engine• 3800W max output• Automatic Low oil shut-off

$168500 GP3800A $105000

1415216

• D-handle drop forged handle• 2 bolt head design• 4” stroke

Model 133 Rivet Buster

$43100 1866804

Chipping Hammer



$35 $125 $315

• Deep case-heardened alloy steel cylinder• Heavy duty upper and lower sleeves• 8” stroke



$15 $55 $145

• Automatic valves• Drop forged alloy steel handles• Built-in large automatic oiler

$84500 1415235 60LB. CLASS

Model 160 Paving Breaker



$25 $75 $225

• Built-in large automatic oiler• Flapper valve design allows dirt to pass without

stopping the tool• Internally reinforced 5-3/4” malleable iron butt

$85900 1415214

Model 131 Backfi ll Tamper



$20 $75 $210

• Built-in large automatic oiler

$165600 1415229

Model 155 Rock Drill Dry

SDS-max® Demolition Hammer

120V 1-1/8 Hex Brute Turbo

Brute™ Breaker Hammer

35 lb Breaker Hammer - JACK



$45 $160 $400

• Built-in large automatic oiler• Class 1-1/8” hex bit• Drop forged alloy steel handle

$97900 1415237

Model 180 Paving Breaker 90#



$25 $75 $2251415199 117 Paving breaker 30# class 7/8” x 3-1/4” $885.00

Moil Point 1-1/8” Shank

1421019 1-1/8” X 6” x 14” moil point $22.501421020-2 1-1/8” X 6” x 24” moil point $29.501421020-3 1-1/8” X 6” x 36” moil point $45.00

HS1503 3 x 12” Scaling chisel 3/4” hex hammer steel $29.60HS1515 12” Bull point 3/4” hex hammer steel $13.22HS1517 1” X 12” Flat chisel 3/4” hex hammer steel $12.75

Narrow Chisel

1421030 1-1/8” X 6” x 14” narrow chisel $22.751421031-2 1-1/8” X 6” x 24” narrow chisel $29.501421031-3 1-1/8” X 6” x 36” narrow chisel $45.001420923 7/8” X 3-1/4” x 14” narrow chisel $18.75

3” Chisel1-1/8” Shank

1421040 1-1/8” X 6” x 14” chisel $29.50

5” Asphalt Cutter 1-1/8” Shank

1421045 1-1/8” X 6” x 11” - 5” asphalt cutter $68.50

Ground Rod Driver 1-1/8” Shank

1421806 1-1/8” X 6” GROUND ROD DRIVER- 1” CAPACITY $85.25

Bushing Tool 1-1/8” Shank

142848 1-1/8” X 6” bushing tool $78.50

Large Selection of Air Hoses AvailableSee Page 34 & 36 For Air Compressors

33St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

Portable Generators

• 5.5 hp Honda engine • Produces up to 2.5kW continuous output • 2,500 maximum watts

$133900 GA25HR

Diaphragm Pumps

High Cycle Generator

Trash Pumps


$225000 GA36HB

• 9.5 hp Honda engine • Produces up to 5kW continuous output • 6,000 maximum watts• Includes wheel kit

$247900 GA6HR


$419900 GA97HE Battery sold separately


$325000 GDP5HA

Wheel Kit

$250.00Item # UWKB

Free Wheel Kit

with Purchase

Wheel Kit

$250.00Item # UWKB

• 4.0 hp Honda engine • 3000 GPH, 25 ft. max lift• 2” suction and discharge

Ask AboutPurchase OptionsMQD206H• 3.5 hp Honda engine • 50 GPM, 25 ft. max lift• 3” suction and discharge

Ask AboutPurchase OptionsMQB3H

Centrifugal Pumps• 3.5 hp Honda engine • 8520 GPH, 25 ft. max lift, 115 ft of head• 2” suction and discharge

$51500 QP2H

• 5.5 hp Honda engine • 6,360 GPH, 25 ft. max lift, 246 ft. of head• 2” suction and discharge

• 5.5 hp Honda engine • 14,700 GPH, 25 ft. max lift, 105 ft. of head• 3” suction and discharge

$74500 QP303H

• 5.5 hp Honda engine • 211 GPM, 42 psi max pressure• 2” suction and discharge, solids up to 1”

$114500 QP2TH

• 8.0 hp Honda engine • 396 GPM• 3” suction and discharge, solids up to 1.5”

$134900 QP3TH

• 11.0 hp Honda engine • 555 GPM• 4” suction and discharge, solids up to 2”

$251900 QP4TH

Submersible Trash Pumps

• 37 ft maximum head • 73 GPM• Automatic thermo-overload protection

$32000 ST2037

• 40 ft. maximum head • 79 GPM• Automatic thermo-overload protector

$33000 ST2040T

Plate Compactors

• 4.8 hp Honda engine • Plate size: 19.7” x 20.7”• Centrifugal force: 3450 lbs.

$219900 MVC88VGHW

• 4.8 hp Honda engine • Plate size: 17.7” x 22”• Centrifugal force: 3080 lbs.

$169500 MVC82VHW

High Cycle Vibrator

Concrete Mixers

• 10,800 vibrations/minute • 2-3/8” diameter head• Centrifugal force: 1600 lbs.

$165000 FXA60A4-20

Walk-Behind And Ride-On Trowels

• 9.0 hp Honda engine • 46” ring diameter• 4 blades

$257400 B46H90 with standard handle (SXH)

• 5.5 hp Honda engine • 36” ring diameter• 4 blades

$217400 J36H55 with standard handle (SXH)

• 68.0 hp Gasoline-LPG engine • Non-overlapping twin 48” blades• variable rotor speed ranges from 10-160 rpm

Ask AboutPurchase OptionsHTXG6DF

$89500 QP205SH

QXH Quick pitch handle for JA and BA series $419.00

• 34.0 hp turbo Vanguard diesel engine • Non-overlapping twin 48” blades• variable rotor speed ranges from 40-160 rpm

Ask AboutPurchase OptionsHHN34TVDTCSL5

• Robin EH-122D engine • 3510 lbs. of impact• Up to 678 BPM

$317500 MTX80

Rammers

HighPressure

CentrifugalPump

Rental Rates (HHN34TVDTCSL5)


$225 $785 $1975

Rental Rates (BA48H)


$50 $165 $425

Rental Rates (J36H55)


$40 $140 $295

Rental Rates (ST2040T)


$35 $125 $315

Rental Rates (ST2037)


$20 $70 $175

Rental Rates (QP3TH)


$45 $165 $425

Rental Rates (QP2TH)


$40 $140 $350

Rental Rates (GA36HA)


$50 $185 $435

RENTAL RATES (GA6HA)


$55 $195 $495

RENTAL RATES (QP40TH)


$75 $240 $525

Rental Rates (FXA60A4-20)


$35 $125 $315

Rental Rates (MT65H)


$50 $175 $405

Large Selection OfSuction and Discharge

Hoses In-Stock1-1/2” To 4” Diameter

15’ To 100’ Length Complete Selection Of Blades And Pans For Most Brands

$59500 MC3SEA• Mixes up to 3 cubic feet of material• Gears submersed in oil for reduced

friction and longer gearbox life• Mixer can be used with wheels or

installed on a stand

4.5 Cu. Ft. Electric Concrete Mixer

See Page 24 for Mortar Mixers

MC3SBA 3 Cu. Ft. Mix N Go mixer 3 hp gas engine $899.00Rental Rates (MC3SEA)


$25 $75 $225



• Open nose design, for simple clearing• Fastener range: 2” - 3-1/4”• Selective actuation, allows transition from

single actuation to contact actuation

Full Head Plastic Strip Collation Framing Nailer

ommmmm m m m m mm mmmm mm mmmmmmm

$29555 NR83A3

POWER TOOLS AND ACCESSORIES

• 15 AMP motor• Electric brake• 24T carbide blade included

7-1/4” Circular Saw With Electric Brake

$11555 C7BMR

18008 7-1/4” 4-Tooth hardiboard blade $69.0018108 10” 6-Tooth hardi-plank dry cutting blade $109.0018109 12” 8-Tooth hardi-plank dry cutting blade $115.00

21100S 5/8” 18 Gauge Narrow Crown Galvanized Staples 1000 ct $5.0021101S 3/4” 18 Gauge Narrow Crown Galvanized Staples 1000 ct $5.7521103S 1” 18 Gauge Narrow Crown Galvanized Staples 1000 ct $6.5021105S 1-1/4” 18 Gauge Narrow Crown Galvanized Staples 1000ct $7.2521107S 1-1/2” 18 Gauge Narrow Crown Galvanized Staples 1000ct $8.0013385 2-1/4” x .092 hardi board nail ring shank, galv. For NV65AH $109.00

13388 2 1/4” x .092 hardi board nail smooth shank, galv. For NV65AH $89.50

26001 4” Masonry cup wheel 5/8” - 11, type C-16 $14.5026021 6” Masonry cup wheel 5/8” - 11, type C-16 $24.50

78005 4½” x 7/8” 36 Grit fl ap disc - 40,60 & 80 grit available $6.5078106 4½” x 5/8-11 40 Grit fl ap disc - 60 & 80 grit available $8.25

Saws

• Up to 1,800 RPM and 27,000 BPM• 654 in/lbs of torque, 22 Torque settings• Includes: 2 batteries, charger, Phillips

driver bit, side handle, and case

18V Lithium Ion Brushless 1/2” Hammer Drill

$21555 DV18DBL

• 8.4 AMP motor• 5.9 ft/lbs of impact energy• 2-modes of operation, hammer & drill

and hammer only

1½” Spline Shank Rotary Hammer

$32555 DH38YE2

Rotary Hammers

• 0-900/1400/2000/2600 RPM No load speed• 1,420 in/lbs of torque, 0 - 3,200 BPM• Includes: 2 batteries, charger, and case

18V Lithium Ion Brushless 1/4” Impact Driver

$21555 WH18DBDL

Cordless Tools

• Tool-less depth adjustment• 2” - 3-1/2” fastener capacity• Sequential and contact nailing with the

fl ip of a switch

• 5.5lbs, lightweight and well balanced • 7/8” - 1-3/4” fastener capacity• Tool-less depth of drive adjustment

Roofi ng Nailer, Coil, Wire Collation

$25955 NV45AB2

Pneumatic Nailers

Fasteners

• 2.3 lbs, lightweight and balanced • 1/2” - 1-1/2” fastener capacity• Tool-free depth adjustment and no-mar

tip

1/4” Narrow Crown Stapler

$8955 N3804AB3

• 4.6lbs, lightweight and compact • 1-1/2” - 2-1/2” fastener capacity• Drives wire and plastic sheet collated nails

for added fl exibility

Siding Nailer, Coil, Wire/Plastic Sheet Collation

$36900 NV65AH2

• Coarse grit for tough grinding applications• Excellent for cleaning castings, mold marks, removing fl ashings

Speed Clean™ Dust

Extraction Bit

Masonry Cup

Wheels

• Bit connects to vacuum system and connector is included• Material removed through center of bit• 50% faster anchor installation• Designed to work with Simpson Strong-Tie® AT-XP®

anchoring adhesive and Set-XP® high-strength anchoring adhesive

Metal Cutting Wheels

Flap Disc For Carbon Steel

20060 4-1/2” X 1/4” x 7/8” metal grinding wheel $2.7520160 4-1/2” X 1/4” x 5/8” - 11 T-27 with hublock $5.2522030 4-1/2” X 1/8” x 7/8” T-27 pipeline cutting wheel $2.7520170 5” X 1/4” x 5/8” - 11 a24n metal grinding wheel $5.5023327 6” X .045 X 7/8”abrasive cut-off wheel for metal $2.7522046 6” X 1/8” x 5/8” - 11 pipeline cutting wheel $6.5020085 7” X 1/4” x 5/8” - 11 T-27 metal cutting wheel $6.7523246 8” X 3/32” metal abrasive cut-off wheel $4.7520096 9” X 1/4” x 5/8” - 11 T2 metal cutting wheel $8.7524000 10” X 1/8” x 5/8” metal cutting wheel $10.7523410 12” X 1/8” x 1” metal cutting wheel $8.2024031 12” X 3/32” x 1” iron worker abrasive blade $8.0023450 14” X 1/8” x 1” metal cutting wheel $17.0024051 14” X 3/32” x 1” iron worker abrasive blade $10.25

Closed Coat

Aluminum

Oxide Belts14457201 3” X 21” 36 grit sanding belt $12.2514457203 3” X 21” 50 grit sanding belt $23.0014457204 3” X 21” 60 grit sanding belt $21.7514457205 3” X 21” 80 grit sanding belt $21.0014457206 3” X 21” 100 grit sanding belt $20.0014457207 3” X 21” 120 grit sanding belt $20.0014457209 3” X 21” 180 grit sanding belt $20.00

3” X 24” and 4” X 24” Sanding Belts Available

• 9.5 AMP motor• Tool-less wheel guard• 11,000 rpm no-load speed

• 13.0 AMP motor• Tool-less wheel guard• 2,800 - 10,000 rpm no-load speed

• 8.0 AMP motor• Precision angle bends• Uniformly bends up to No.5 (3/8”, 1/2”,

5/8”) Grade 60 rebar

4-1/2” Disc Grinder

4-1/2” Variable Speed Angle Grinder

Rebar Cutter Bender

/8”, 1/2”,

$9400 G12SE2

$10555 G12VA

$227500 VB16Y

Miscellaneous Tools

Worm Drive

Saws

• 15.0 amp• Cut depth: 2-7/16” at 90 deg. • Weight: 8.8 lbs.

• 15.0 amp• 3-1/2 in. depth of cut and 25 in. rip

capacity• Portable and compact weighing only

49 lbs

• 15.0 amp• Cutting depth - 2-3/4”• Includes: 42-tooth Diablo® Cermet-

tipped blade and Wrench• 15.0 amp• 53° bevel allows users to complete a wider

variety of cuts• Weighs only 13.2 lbs.

y

$11955 SPT67WM-22

$35955 SPT70WT-22

$29955 SPT78MMC-22$34455 SPT70WM-22

7-1/4” Sidewinder Magnesium Circular Saw With Diablo Blade

10” Worm Drive Table Saw With Carbide Tip Diablo Saw Blade

8” Worm Drive Metal Cutting Saw With A Diablo Blade

10-1/4” Mag Worm Drive Saw With Diablo Blade

3-1/2” Clipped Head Framing Nailer

$19900 NR90ADPR

• Bit connects to vac• Material removed t• 50% faster anchor • Designed to work w

anchoring adhesivadhesive

Buy 10 or More Blades and Save

• Heavy duty for tougher applications• High pressure is ideal for removing deeper scratches from the work surface• Made with premium zirconium abrasive material which provides long-life and

high stock removal

As Low As

$600

Each for 10 or more

Starting At

$8900

35St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

POWER TOOLS

TC1 1/8” Carbide Tilecut Bit for Rotozip $8.75XB-DC1 1/4” Carbide cement board/plaster duracut bit $17.35WD1 1/4” Window and door drywall bit 1/pk $7.25GP16 1/8” Guide point for clean cuts in drywall 16/pk. $21.75RZBITSET1 5 Pc. Multi-bit set drywall wood , plastics and tile $17.25ZB8 Standard Point Drywall Zipbit 8 pack $10.45XB-DW2 Drywall x-bit - 2 per pack $10.97SC4 Sabrecut Zipbit for wood and plastic siding 4 pack $9.00XB-FT1 Floor Tile Xbit Diamond Grit 5/32” Bit $31.50XBMPDM2 Multipurpose dust management Xbit 2 pack $12.00DM5 Dust management attachment $20.50

Accessories

• 8.0 amp motor• 10,000 rpm • Quick wheel change system

• 8.0 amp motor• 10,500 rpm • Quick wheel change system

4-1/2” Grinder With Paddle Switch $11955 WE8115

$12555 WP9115Q • For stainless steel, steel, alloy steels, hardened steels, pipe, tube or solids

• 13,200 max rpm• 5/64” thick for fast cutting

• 12.0 amp motor • 9,000 rpm • Quick wheel change system

4-1/2” Combinator Cut/Grinding Wheel

4-1/2” Grinder

6” Grinder With Paddle Switch

$22955 WEP15150Q

655339000 6” Slicer abrasive wheel for steel/ferrous metals - Quantity Breaks Available $1.99

3/4” Square Drive Impact Wrench (Reversible)

$56555 6906

Cordless Tool Kitsch (Reversible)

• Variable 2-speed (0-400 & 0-2,000 RPM) • Compact design at only 7-9/16” long, 3.3 lbs• Includes: Impact Driver, Hammer Drill Driver,

charger, (2) batteries and tool box

18V LXT® Lithium-Ion Cordless 2-Pc. Combo Kit (4.0Ah)

$30555 XT218MB

• Provides up to 65% more run time per charge compared to the 18V 3.0Ah battery

• Battery delivers constant power and run time in extreme temperatures, even in winter (-4º F/ -20º C)

18V LXT® Lithium-Ion 5.0 AH Battery 2 Pack

$21555 BL1850-2

• Compatible with Makita 9.6-Volt - 24-Volt slide-style and pod-style batteries

• Battery and charger sold separately

18V Compact Lithium-Ion Cordless Jobsite Radio, Tool Only

$9455 BMR100W

• Two 18V LXT® Lithium-Ion Batteries deliver the power and performance of a corded saw*

• Large cutting capacity (2-5/8” at 90°)• Weighs only 10.1 lbs. with batteries (not included)

18V X2 LXT® (36V) Cordless 7-1/4” Circular Saw (Tool Only)

$20955 XSH01Z

• 1/2” Hammer Driver-Drill - 480 in. lbs. of torque• Reciprocating saw• Impact Driver - 1,420 in. lbs. of torque• Flashlight, charger, 2 batteries and bag

18V LXT Lithium-Ion 4-Pc. Combo Kit

$42955 LXT407

• 3.5 amp motor• 0 - 2,000 Impacts per minute • Maximum fastening torque of 260 ft. lbs

1/2” Drive Impact Wrench

$21955 TW0350

ch

• 9.0 amp motor • 0 - 2,800 Strokes per minute • 1-1/8” stroke

Variable Speed Reciprocating Saw

$8955 JR3050T

Impact Wrenches

Variable Speed Reciprocating Saw

$18955 JR3070CT

• 15.0 amp motor • Cuts 4-1/2” Round Stock at 45° and 90° • Adjustable depth stop

14” Portable Cut-Off Saw

$16955 2414NB

aw

• Bevel cuts 0-45° • 15.0 amp motor • Two built-in L.E.D. lights illuminate the line of cut

7-1/4” Circular Saw With LED Lights

$9955 5007F

t

D Lights

• 10.5 amp motor • 11,000 rpm • Electric brake for maximum productivity

• 10.5 amp motor • 10,000 rpm • Includes: Grinding wheel, tool less grinding

guard and cutting wheel with extra cutting guard

5” Angle Grinder

6” Angle Grinder/Cut-Off Tool Kit

$14255 GA5020

$15455 GA6010ZX2

• 7.9 amp motor • Soft-Start feature for smooth start-up • Pre-setting dial (2,000 – 4,000 RPM) for optimum

rotating speed

4” Electronic Wet Stone Polisher

$32555 PW5001C

Nibblers and Shears

Corded Drills

10 Gauge Shear

16 Gauge Nibbler

3/8” Angle Drill

$47955 JS3201

$29955 JN1601

$22955 DA3010F

Grinders And Sanders

• 7.0 amp motor, 0-1,100 RPM• 0-4,500 BPM• 40 bit angle settings for chiseling

1” D - Handle SDS Rotary Hammer

$17455 HR2475

• 12.0 amp• 230-460 RPM, 1,300 - 2,600 BPM • Torque limiting clutch

1-9/16” Spline Rotary Hammer

$40955 HR4041C

Saws

• Variable speed dial for presetting maximum speed • 15.0 amp motor• 0 - 2,800 Strokes per minute

• 6.0 amp motor • Capacity: 10 ga. mild steel, 12 ga. stainless • Cuts with no material loss in the kerf as with nibblers

• 5.0 amp motor • Capacity: 16 ga. mild steel, 18 ga. stainless • 2” max cutting radius

• 4.0 amp motor • 0-2400 rpm • Built-in shock proof, high output, white L.E.D.

Rotary Hammers

• 10.0 amp• 2,500 BPM• 4.6 ft. lbs. impact energy

1-9/16” SDS-Max Rotary Hammer

$36955 HR4002

• 9.0 amp motor• 0 - 1,600 Impacts per minute • Maximum fastening torque of 433 ft. lbs

DML801X1 18V L.E.D. Flashlight And 3.0 ah Battery $99.55

616502420 6” Combinator Cut/Grinding wheel $5.75

• 8500 rpm• Includes: Cordless and corded grinder, charger,

(1) batteries and tool bag

18V LXT® Cordless 4-1/2” Angle Grinder Kit (4.0Ah) w/corded 4-1/2” Angle Grinder

$20955 DK0060MX1

• 2-speed transmission (0-550 & 0-2,100 RPM)• 0-31,500 BPM • 1,090 in.lbs. of Max Torque

18V LXT® Brushless Cordless 1/2” Hammer Driver-Drill (Tool Only)

$14455 XPH07Z

• 3-speed power selection switch (0-1,300 / 0-2,000 / 0-2,600 RPM) • 0-1,300 / 0-2,800 / 0-3,400 IPM • 1,090 in.lbs. of Max Torque

18V LXT® Brushless Cordless 3-Speed Impact Driver (Tool Only)

$14355 XDT01Z

M)

• Delivers 1,460 in. lbs. of max torque• 3-speed power selection switch (0-1,300, 0-2,000,

0-2,600 RPM & 0-1,300, 0-2,800, 0-3,400 IPM)

18V LXT Lithium-Ion Cordless Brushless Impact Driver Kit

$31955 LXDT01

While Supplies Last

Great Value

As Low As


14” MM4® 4-Stroke Power Cutter• No Oil Mixing Simplifi es Operation and Prevents

Piston Seizure Due to Improper Mixing• Lower noise at 93.2dB(A)• Lower fuel consumption at .45 gallons

per hour

$1,19500EK7651H



• 5.5 amp motor, 0-2,800 RPM • Trigger speed control with reversing • Built for industrial/construction applications

3/8” Magnum® Drill With Keyless Chuck

$9500 0233-20

Corded And Cordless Drills

• 8.0 amp motor, 0 to 850 RPM• Variable speed control • 360° locking side handle

1/2” Magnum® Drill With Keyed Chuck

$11400 0299-20

• 3.5 amp motor, 0 to 1350 rpm• Large paddle trigger for smooth control• Angled chuck for reaching close quarters

other drills cannot reach

3/8” Close Quarter Angle Drill

$12500 0370-20

• 0-500 rpm and 100 in.-lbs. torque• 14+1 clutch positions • Built-in LED for illumination of dark work spots

M12 1/4” Hex Chuck Sub-Compact Driver Drill

$12955 2401-22

• POWERSTATE™ Brushless Motor• 1,200 in-lbs of Peak Torque• 32,000 BPM

M18 FUEL™ 1/2” Hammer Drill/Driver Kit

$29955 2704-22

• 7.0 amp motor, 0 to 600 rpm• Trigger speed control with reversing • Keyed chuck

1/2” D-Handle Drill With Quik-Lok® Cord

$20500 1007-1

• 7.0 amp motor• 650 rpm with reversing • Keyed chuck

1/2 In. Compact Drill

$22000 1610-1

• 3-1/4” Cut Capacity – cuts most common materials for Electrician, Plumber and Mechanical

• Cast Aluminum Gear Case • Drop Resistant Pulley Guard

$38955 2629-22

M18™ Cordless Band Saw Kit

• 3.8 amp, 1,900 spm• Cuts up to 7 ft. per minute• Perfect for tight radius cuts into steel

16 Gauge Nibbler

$56900 6890

• 1200 in. lbs. of torque • Up to 3,550 impacts per minute • Built-in LED Light illuminates work surface

M12 Fuel 1/4” Hex Impact Driver Kit

$16555 2453-22

Cordless Impact Wrench Kits

• 1,600 in.- lbs. of torque • Up to 3,600 impacts per minute • Built-in LED Light illuminates work surface

M18 Fuel 1/4” Hex Impact Driver Kit

$29955 2653-22

• 7.5 amp motor • Trigger speed control in two ranges • Hammer with rotation or rotation only

1/2” Pistol Grip Dual Torque Hammer-Drill

$13900 5378-20

ROTARY HAMMERS

• 7.0 amp motor • 0-1,500 rpm, 0-5,625 bpm • 3-mode operation: rotary, hammer and rotation

7/8” SDS Plus Rotary Hammer Kit

$18955 5262-21

• 11.0 amp motor • 190-385 rpm, 1700-3400 bpm • 1-1/2 in. solid bit OR 6 in. core bit capacity

M18 Hackzall Reciprocating Saw Kit

$21055 2625-21

• 3.3 ft-lbs of impact energy, 0-1,350 RPM and 0-5,000 BPM

• Up to 1-1/8” solid bit capacity • Up to 3” thin wall core bit capacity

M18 FUEL™ 1-1/8” SDS Plus Rotary Hammer Kit

$53955 2715-22

M

• 11.6 amp motor • Variable temperature 140 to 1040 degrees F • Rotate rear housing to select temperature

Variable Temperature Heat Gun

$9555 8977

Heat And Caulk Guns

• Over 200 tubes of 10oz construction adhesive can be dispensed on one battery charge

• Rotating quick-change collar

M18™ Cordless 10oz. Caulk and Adhesive Gun Kit

$26555 2641-21CT

48-08-1095 Quart cartridge conversion kit for 2641 series gun $39.00

6242-6 Compact band saw $199.55

6161-30 6” Grinder with lock on paddle - 13 amp $135.55

• 21,000 rpm • For mounted wheels and points up to 1-5/8 in.,

reinforced wheels up to 2 in.

4.5 Amp Die Grinder With Paddle Switch

$21955 5194


• 15 amp, 4 max hp motor• 3,900 RPM • Quick change abrasive wheel system

• 11 amp• 10,000 RPM • Tool-free accessory change

14” Abrasive Chop Saw

4-1/2” Small Angle Grinder With Paddle Lock

$14955 6177-20

$8655 6147-30

M18 Fuel Cordless Tools

• 50 degree max bevel • 5000 rpm • Includes: 2 Batteries, charger, blade, blade

wrench and contractor bag

M18 FUEL™ 6-1/2” Circular Saw Kit

$38955 2730-22

• 2 Mode: 100 ft. lbs and 700 ft. lbs • 1,100 ft. lbs torque • Includes: 2 Batteries, charger and case

M18 FUEL™ 1/2” High Torque Impact Wrench w/Friction Ring Kit

$41955 2763-22

• Auger bits: Up to 1-1/4” and self-feed bits up to 2” • 0 - 1,200 RPM • POWERSTATE™ Brushless Motor

M18 FUEL™ HOLE HAWG® 1/2” Right Angle Drill Kit

M12 Cordless Grease Gun Kit

$43955 2707-22

$17955 2446-21XC

• 8500 RPM • Tool free accessory and guard adjustments • Includes: 2 Batteries, charger and case

• M18 FUEL™ 1/2” Hammer Drill/Driver (2604-20) • M18 FUEL™ 1/4” Hex Impact Driver (2653-20) • Includes: 2 Batteries, charger and case

M18 FUEL™ 4-1/2” / 5” Grinder, Paddle Switch No-Lock Kit

M18 FUEL™ LITHIUM-ION 2-Tool Combo Kit

$38955 2780-22

$39955 2797-22

• 0-2800 SPM variable speed trigger • Quik-Lok™ blade clamp • Center pivot adjustable shoe

13 Amp Super Sawzall® Reciprocating Saw

$17955 6536-21

Sawzalls

• 15.0 Amp Milwaukee Motor • Variable Speed Trigger, 0-2800 SPM • Quik-Lok™ Blade Clamp System

15.0 Amp Super Sawzall® Recip Saw

$19500 6538-21

• 11.0 amp motor • Trigger speed control: 0-380 sfpm • 5” x 5” Cutting Capacity

Deep Cut Portable Band Saw

$29955 6232-21

Corded Saws

• 13.0 amp, 3,700 rpm motor • 2-9/16 in. cut depth for one-pass cuts • Dry-cut technology

8” Metal Cutting Saw With Case

$29955 6370-21

• 15.0 amp motor, 5,800 rpm • Tilt-Lok™ main handle adjusts to the work • Superior blade visibility from either side

Tilt-Lok™ 7-1/4” Circular Saw

$13555 6390-21

• 15.0 amp motor, 5,800 rpm • Tilt-Lok™ main handle adjusts to the work • Superior blade visibility from either side

Tilt-Lok™ 7-1/4” Left Blade Circular Saw

$14400 6391-21

2620-21 M18 Sawzall Kit with battery and charger $250.00

3107-6 1/2 In. D-handle right angle drill kit $249.55

• 0-3000 SPM• 1-1/8” Stroke length• Includes: Blade, charger, case and battery

M18 FUEL™ SAWZALL® Reciprocating Saw Kit

$29055 2720-21

• 6.8 amp motor, 0-2,500 RPM • Trigger speed control • 360° swivel head

18 Gauge Shear

$17500 6852-20

Metal Shears And Nibblers

Miscellaneous Tools

48530141 3’ M-Spector digital camera cable extension kit $78.000880-20 18V wet/dry vac w/ fi lter, hose, crevice & wide tool $94.552790-20 Jobsite Radio $104.55

• 10.5 amp motor • 450 rpm, 0-3,000 bpm • 2-Mode rotary hammer and hammer only

1-9/16” SDS Max Rotary Hammer

$39855 5317-21

• 14 oz. cartridge or 16 oz. bulk grease capacity• Up to 7 grease catridges per charge• Over 8000 psi

37St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

SDH1 1/8” - 1/2” Step Drill with 1/4” shank $22.00SDH2 3/16” - 7/8” Step Drill with 3/8” shank $47.25SDH3 1/4” - 7/8” Step Drill with 3/8” shank $40.00SDH4 1/4”, 7/8”,1-1/8” Step Drill with 3/8” shank $63.50SDH5 7/8” Step Drill With 3/8” Shank $44.50

Additional Sizes Available

Corded And Cordless Drills

• 3.8 Amp all ball bearing motor, 0-1100 RPM• Variable speed dial • Ideal for drilling in tight spaces

• DDS181-02 Compact Tough™ 1/2 In. drill/driver

• 25618 1/4 In. hex impact driver

3/8” Right-Angle Drill

18 V Lithium-Ion 2-Tool Combo Kit

$23955 1132VSR

$19955 CLPK232-181

• 600 in. lbs. torque and 0-500/0-1,700 rpm• 25 Position Clutch • LED Light- Great for dark or enclosed areas

18V Compact Tough™ 1/2” Drill/Driver

$19555 DDS181-02

• 600 in. lbs. torque and 0-500/0-1,700 rpm• 18+1 Position Clutch • 0-27,000 No load BPM

18V Compact Tough™ 1/2” Hammer Drill/Driver

$19955 HDS181-02L

ver

• 1/4 In. quick-change hex and 1/2 In. square drive chuck • 0-1,650 Torque, 0-3,200 BPM• 1/4” Hex and 1/2” Square Drive

18V Socket Ready Impact Drive Kit

$29955 IDH182-01L

• 7.0 Amps, 0-4,500 RPM• Posi-Lok™ Nose Piece Design• 106 in. lbs. of Torque

Drywall Screwgun

$11955 SG450

drive chuck

Rotary Hammers

SDS-Plus Rotary Hammer and Grinder Package

• 50% Faster Drilling - 7.1 in/minute! • 3-Mode Selector • Impact Force - 2.2ft.-lbs.

36V 1” SDS-Plus® Rotary Hammer

$69555 11536VSR

• 47.0 ft. lbs impact energy • 15.0 amp • No load bpm 1,000

120V 1-1/8 Hex Brute Turbo - Deluxe kit

$164955 BH2770VCD

kit

• 8.0 Amp, 0-850 RPM • 3 modes of operation, rotation only, rotary

hammer and hammer only mode • Variable speed 3 fi nger trigger

1-1/8” SDS-Plus® Rotary Hammer

$24955 RH328VC

• 12.0 Amp• 2 modes - rotary hammer & hammer only mode • Vario-Lock™ positioning

1-9/16” SDS-Max® or SDS Combination Hammer

$39555 RH540M or RH540S

• 14.0 Amp • 2 modes of operation, rotary hammer and

hammer only mode • Variable-speed dial

$91555 11245EVS

• 13.5 Amp • 2 modes of operation, rotary hammer and

hammer only mode • Variable speed dial

1-7/8” SDS-Max® Rotary Hammer

$81555 RH850VC

• 15.0 Amp • 43 Ft. Lbs. impact energy • No Load BPM 1,400

Brute™ Breaker Hammer

$156955 BH2760VCD

2” SDS-Max® Combination Hammer

• 3.3 Amps, 4,500-12,000 OPM • Multi-purpose sander with pad that both

orbits and rotates • Variable-speed dial

• 2.5 Amps, 7,500-12,000 OPM • Bosch Microfi lter System • Uses Industry-Standard 8-Hole 5” Hook-&-Loop

Discs

$14455 3725DEVS

$7955 ROS20VSK$3500 BL21

5” Electronic Variable Speed Random Orbit Sander/Polisher

5” VS Palm Random Orbit Sander Kit

Sanders

Accessories

11247 1-9/16” Spline rotory hammer kit $349.55

GWS13-60PD 6”High-Performance Angle Grinder with No-Lock-On Paddle Switch $159.55

Routers

• Variable speed dial • 3-3/4” base opening and 2” subbase opening • Microfi ne bit depth adjustment system on both

bases

2.25 HP Combination Plunge & Fixed-Base Router Pack

$22455 1617EVSPK

• 1.0 HP (Max. Tool Output) 5.7 Amp Motor• Fixed Base accepts bits up to 1-5/16” in diameter • Fast & Precise Depth Adjustment System

Colt™ Variable-Speed Palm Router Kit

$21955 PR20EVSK

Grinders

• 10.0 Amps, 11,500 RPM • 5/8” -11 Spindle • Carbon Service Minder™ brushes

4-1/2” Angle Grinder with No-Lock-On Paddle Switch

$7655 GWS10-45PD

• 12.5 Amps; 9,300 RPM • Lock-on/off switch • Four-stage dust intrusion seal• High torque to handle sustained loads

• 13.0 Amps• Variable-speed setting – 2,800 rpm to

11,500 rpm• Two-position Vibration Control™

• 13.0 Amps• 9,300 RPM • Two-position Vibration Control™

5” Concrete Surfacing Grinder

5” High-Performance Angle Grinder

6” High-Performance Angle Grinder

$37955 CSG15

$12955 GWS13-50VS

$14855 GWS13-60

• 8.5 Amps; 11,000 RPM • Variable depth adjustment • Specially designed guard system For

tuckpointing applications

5” Tuckpoint Grinder

$29955 1775E

• 15 Amps, 4,300 RPM • Wrap around side handle mounts left or right • Wheel rotation carries sparks, dust and debris

away from the operator

$57955 1365

• 500-3,100 SPM • Four orbital-action settings • Variable-speed dial

7.0 Amp Barrel-Grip Jig Saw

$15755 JS470EB

14” Abrasive Cutoff Machine

Saws

• 12 Amps • Variable speed trigger• Ultr compact size - only 17.8” long

$13055 RS325

1” Reciprocating Saw with Carrying Bag

• 3 Amp motor • Variable-speed dial• Tool-less accessory change lever

10” Portable Jobsite Table Saw

$35955 GTS1031

• 3 Amp motor • Variable-speed dial• Tool-less accessory change lever

Multi-X Oscillating Tool Kit

$20955 MX30EC-21

• 15 Amps • 14” horizontal capacity (nominal) • 6-1/2-in. vertical capacity against the fence (base)• 6-1/2-in. crown capacity against the fence

$79955 GCM12SD

se)

12” Dual-Bevel Glide Miter Saw

• Powerful 15-amp 4.0-hp max motor • 25” ripping capacity • Active Response Technology™ – mitigates injury

to user in case of blade contact, dropping the blade under the table with no blade damage

$149955 GTS1041A-09

10” REAXX™ Jobsite Table Saw w/ Gravity-Rise™ Wheeled Stand

Includes:2 Points, 2

Chisels And Cart

Includes:2 Points, 2

Chisels And Cart

• 15 Amp motor • Adjustable bevel and depth levers • Soft grip handle

7-1/4”Circular Saw With Built-In Rafter Hook

$12555 CS10

• Self-starting point starts on contact• Resharpenable cutting edge • For all common drilling needs

• Speed helix design for three times faster drilling• Last 50% longer than high-speed steel • Easier drilling, reduced heat and extended drill bit life

High-Speed Steel Step Drill Bit

21 piece Metal Index Black Oxide Drill Bit Set

• 7.2 Amp, 0-1,300 RPM • 3 modes of operation, rotation only, rotary

hammer and hammer-only mode • Variable-speed reversing trigger

1” SDS-Plus® Bulldog Xtreme Rotary Hammer

$17955 11255VSR

$19555 11255VSR-1G

JS572EL 7.2 Amp Top-Handle Jig Saw Kit $288.55

1” SDS-plus® Bulldog™

Xtreme Rotary Hammer

with 4.5”, 6 Amp Small

Angle Grinder



• 7.8 amp motor• 0-850 rpm• 360° Side handle for greater control and

versatility

Heavy Duty 1/2” VSR Drill

$9455 DW235G

Variable Speed Drills

• 9.0 amp motor• 0-550 rpm• 2-position rear spade handle and

3-position side handle

1/2” Heavy Duty Spade Handle Drill

$17955 DW130V

• 6.5 amp motor• 0-2500 rpm• High power motor for metal fastening

applications

Heavy-Duty VSR Versa-Clutch® Screwdriver

$18955 DW268

Drywall Screwdrivers

• 6.5 amp motor• 0-2500 rpm• High torque for deck building and heavy

gauge steel stud framing

Heavy-Duty VSR Drywall/Framing Screwdriver

vy

$10255 DW276

• 12.0 amp motor• 0-2900 spm• 4 Position blade clamp allows for fl ush

cutting and increased versatility

12.0 Amp Corded Reciprocating Saw

$10 455 DWE305

Reciprocating Saws

• 12 amp motor• 0-2700 spm• Keyless blade clamp for quick and

easy blade changing

Heavy-Duty Reciprocating Saw Kit

$14955 DW310K

• 15.0 amp motor• Rear pivot depth of cut adjustment • 50° Beveling capacity

Heavy-Duty 7-1/4” Circular Saw With Electric Brake

$18555 DW364

Circular Saws

• 15.0 amp motor• 13.8 lbs. Lightweight magnesium

construction• 53° Bevel capacity

7 1/4” Worm Drive Circular Saw

ium

$20955 DWS535

• 15.0 amp motor• Rear pivot depth of cut adjustment• 50° Bevel capacity

Heavy-Duty 8-1/4” Circular Saw With Electric Brake

$21955 DW384

• 24” Tile capacity, 18” diagonal• 14 amp 1.5 HP motor• Weighs only 69 lbs.

Heavy-Duty 10” Wet Tile Saw

$89955 D24000

Miscellaneous Saws

• 15.0 amp motor• Ability to cut 2 x 16 dimensional lumber at

90° and 2x12 at 45°• Miters 60° to the right and 50° to the left

12” Double Bevel Sliding Compound Miter Saw

$61955 DWS780

• 10.0 amp motor• Keyless adjustable guard • Dust ejection system

4-1/2” Small Angle Grinder With No Lock-On

$9455 DWE402N


• 13.0 amp motor• 8,000 rpm no load speed• Keyless adjustable guards

7” Medium Angle Grinder

$13555 DW840

• 2.4 amp motor MOVES AT 14,000 OPM• Dual plane counter-balanced low-vibration

design reduces fatigue• 1/4 Sheet paper size

Heavy-Duty 1/4 Sheet Palm Grip Sander Kit

$5500 D26441K

• 8.0 amp motor• 2.8 Joules of impact energy, providing

fast drilling and powerful chipping • 0 - 4,300 bpm

1” D-Handle 3-Mode SDS Rotary Hammer Kit

$21555 D25213KI

Rotary Hammers

• 12.0 amp motor• 8.0 ft-lbs of impact energy provides

fast drilling and powerful chipping• 490 rpm, 3300 bpm

1-9/16” Spline Rotary Hammer Kit

$41955 D25553K

• 12.0 amp motor• 8.0 ft-lbs of impact energy provides

fast drilling and powerful chipping• 490 rpm, 3300 bpm

1-9/16” SDS Max Combination Hammer Kit

$41955 D25501K

• 400 ft-lbs of maximum torque • 0-1,500 rpm/0-2,300 ipm • Includes: charger, (2) batteries, and

kit bag

20V MAX 1/2” High Torque Impact Wrench Kit

$34055 DCF889M2

Cordless Tools And Kits

• 22 Clutch settings• 3 - Speed: 0-575/0-1,350/0 - 2,000 rpm • Includes: 1 hour charger, kit box, (2) batteries

and side handle

20V MAX* Lithium Ion 3-Speed Hammerdrill Kit

$27955 DCD985M2

• 1/2” hammerdrill with patented 3-speed, all-metal transmission

• Reciprocating saw with 4-position keyless blade clamp

20V Max* Lithium Ion Hammerdrill/Recip Saw Combo Kit

$35555 DCK292L2

• DCD996 1/2” Hammerdrill• DCF887 1/4” Impact Driver • (2) 5.0Ah batteries, charger, side handle

(2) belt hook and kit box

20V MAX Hammerdrill / Impact Driver Combo Kit

$34955 DCK299P2

• HEPA rated wet/dry fi lter traps dust with 99.97% effi ciency at 0.3 micron

• 2-Gallon tank capacity • 31 CFM

18/20V MAX* Cordless/Corded Wet-Dry Vacuum

$61955 DCK592L2

• Includes: DCD985 hammerdrill, DCF885 1/4” impact driver, DCL040 LED work light, DCS380 Reciprocating saw, and DCS391 circular saw

20V MAX* Premium 5-Tool Combo Kit

• 8,000 rpm motor • Quick-Change™ Wheel Release allows for

tool free wheel changes• 2-fi nger trigger switch with lock-off button

20V Max* Lithium Ion 4-1/2” /5’’ Grinder (Tool Only)

$11555 DCG412B

• 7.5 AMP motor• 345 ft-lbs of deliverable torque • 1/2” detent pin anvil

Heavy-Duty 1/2” Impact Wrench

$17555 DW292

Miscellaneous Tools

• 10.0 amp motor• 100 - 350 ft per minute• LED light

5” Deep Cut Variable Speed Band Saw Kit

$32955 DWM120K

20V Max* Lithium Ion Grease Gun

DC820KA 18V 1/2” Cordless impact wrench kit $259.55DCF886M2 20V MAX* Lithium Ion Brushless 1/4” Impact Driver Kit $269.55DCD920KX 1/2” 14.4V Cordless drill/driver kit $219.55

DWE4559N 9” 6,500 rpm 4.7 HP Angle Grinder No-Lock $206.55

D25701K 1-7/8” SDS-Max CTC rotary hammer kit $1099.55D25602K 1-3/4” SDS max rotary hammer $589.55D25851K 12 Lb. Demolition hammer kit $559.55

DWS709 12” Double bevel compound miter saw with blade $399.55

DCR018 18V/20V MAX*/12V MAX* compact worksite radio $115.55

DW124K Heavy duty 1/2” right angle drill $374.55DWD215G 1/2” Drill With Keyless Chuck $145.55DWD112 3/8” 7 amp VSR drill with keyless chuck $63.55

$11655 DCV581H

• 2.1 Joules impact energy provides corded power without the cord

• Compact L-shape design• SHOCKS™- Active Vibration Control

20V Max* SDS 3 Mode Rotary Hammer Kit

$46955 DCH253M2

• Powerful motor delivers 10,000 max psi• High-volume pump pushes up to 5.0 oz/min

high-fl ow applications.• Up to 16 cartridges per charge with a

single DEWALT 20V MAX Battery (4.0 Ah)• Includes: Battery, charger, shoulder strap,

and kit box

$24455DCGG571M1

10” Jobsite Table Saw 32 - 1/2” Rip Capacity, and a Rolling Stand

• 15 amp motor• 2-1/2” Dust Collection Port easily connects to a vacuum for

effi cient dust extraction• 3-1/8” depth of cut at 90 and 2-1/4” at 45• Flip over ripping fence Allows for narrow rip cuts

$58955 DWE7491RS

39St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

DRYWALL TOOLS

6” Wall Board Saw

$480 15-206

• 6” blade length• Designed especially for plasterboard• Self-starting point sharpened for plunge cuts

6” Cushion Grip Wall Board Saw

$650 15-556

• 6” blade length• Ergonomically designed curved handle• Sharp tip for plunge cuts

Cushion Grip Multi Saw

$925 20-220

• Works with standard reciprocating sw or hacksaw blades• Ideal for sawing in tight spaces• Ergonomically designed, curved handle is cushioned for comfort and

prolonged use

Tri-Fold Plaster Saw

$3325 3636

• Accepts standard recip blades

14 Ounce Drywall Hammer

$3475 E3-11

• Nylon-vinyl grip• For scoring drywall

7” Tapered Bucket Trowel

$1425 PL800

$39500 0063061423YE

Wallboard Panel Lift

2315

• 150 LB. capacity• 15’ height• Up to 4’ x 16’ wall board capacity• Two speed winch handle

• 2 Swivel and 2 locking swivel casters• 23” x 49” x 46”• 3000 lb. capacity

RENTAL RATES (2311)DAILY WEEKLY MONTHLY

$35 $115 $285

Strap-N-Stride Drywall Stilts

$26995 10771

• Lightweight aircraft aluminum• 24” - 40” height• 230 lb. capacity

10230 18” - 30” Ez-Stride drywall stilts $270.00

Hi-Stride Drywall Bench

$33500 10329

• 450 lb. capacity• 48” long, 18” to 28” adjustable height• Portable folding lightweight walk up bench

2” Plastic Putty Knife

89¢ 00904

• Made of tough polystyrene• Perfect for one-time project use• Chisel edge to aid fi ne spreading

PK30 3” Plastic putty knife $1.153” Stainless Steel Scraper, Stiff

• Rust resistant• Blades of spring stainless steel• Polypropylene handles to resist paint thinners and adhesive solvents

148522 6” Stainless steel broad knife, fl exible $4.25

$825 148515

1-1/4” Putty Knife, Stiff

• Soft grip handle• High quality carbon steel blade• Full tang for maximum strength

90115 3” Stiff scraper $8.2590119 4” Stiff broad knife $9.7590106 1-1/4” Putty knife, fl exible $5.50

$550 90107

2” X 60 Yard Blue Painters Masking Tape

$1075 2090

• Can be used for masking on glass or surfaces exposed to sunlight

• Solvent and moisture resistance

12 X 5-1/4 Drywall Board Lifter

$1825 790

• Designed for easy use• Self-righting features• Non-slip checkered surface to provide foot traction

801 Drywall roll lifter $15.00

Heavy Duty Drywall T-Square 47-7/8 X 22

$2425 27HD

• Notched head• Reverse rulings• Stud markings all for quick, accurate cuts

RIGHT HANDED TAPESHOOTER DRYWALL TAPER

$14300 798D

• One-handed mud loading• Precision mud fl ow control is easy to adjust• Made from lightweight aluminum

3 10 X 10 aluminum hawk with durasoft handle $17.001 13 X 13 aluminum hawk with durasoft handle $19.7531 Drywall tape reel $9.50812 12” Stainless steel drywall mud pan $13.50

12 oz Drywall Hammer With 16” Handle

$3200 800

• Lightweight and perfectly balanced• Properly rounded and checkered head• Wedge shaped steel blade is notched underneath and

doubles as a nail puller

Sharpshooter Hopper Gun

$9400 693

• Angled hopper allows user to spray ceilings and walls• Gun features a handy air control valve• Seven orifi ce sizes with tubular design for reduced

overspray and greater texture variety

5 X 3-3/4 Drywall Thin Coat Corner Trowel

$1125 24D

• Lightweight tool made from one piece of fl exible stainless steel

• Hardened cutter wheel and center pin will remain sharp indefi nitely

Drywall Circle Cutter - 16” Capacity

$835 29

• Measures accurately on the calibrated steel shaft

• Hardened cutter wheel and center pin will remain sharp indefi nitely

1/2 Sheet Drywall Hand Sander

$1100 20D

• Lightweight aluminum backing plate bonded to foam pad

• Designed for die-cut or a half sheet sandpaper • DuraSoft® handle provides soft feel

26A Universal drywall pole sander with out handle (handle #m28 required) $18.50

M28 48” Handle for pole sander $7.0028” Quick Mix®

$1475 819

• Saves time and energy• Fits any 3/8” or larger slow speed drill (500 rpm)• Blade measures 8-1/2 x 4-1/28” Blue Steel Taping Knife With Durasoft Handle

$950 3508D

• Resilient DuraSoft® handle provides a soft feel• Blade fl exes just right for feathering but won’t take a set• Premium tempered blue steel blade with aluminum backing

plate

3506D Durosoft 6” taping knife , blue steel blade $9.253510D Durosoft 10” taping knife , blue steel blade $10.253512D Durosoft 12” taping knife , blue steel blade $11.25

NO Pinch points

NO Free fall

NO Spinning wheels

NO Exposed parts

0

0000000000000000p g

p

ted steel

pin will

ffffffffffffffffffffff

Stilts

e

Drywall Dolly

We Stock Drywall Screws



LANDSCAPING TOOLS

• 3 Cylinder Kubota diesel• 500 LB. operating capacity• 36” Wide bucket

Trailer Rental Not Included

Rental Rates (MT52 - St. Louis Only)


$155 $550 $1375Rental Rates (Auger Attachment #450 With Bit)


$50 $175 $450

• 2 HP 3.0 CID• Right hand into the ground rotation• Weight: 18 lbs.

Auger Bit Not Included

Rental Rates (M240)


$35 $140 $350Rental Rates (3-1/4” - 8” Auger Bits)


$5 $20 $60

1-Man Auger

• Unique Edge Control to Easily Direct Product Distribution

• Positive Stop Dial for Precise Gate Adjustment• Stainless Steel, Heavy Duty Frames• 14” Fully Pneumatic Tires

Additional Charge for Assembly

$25000 82100

ALL SEASON 100 lb Stainless Steel Push Spreader

• 4 HP Honda engine• Aerate 225 FPM• 26-1/2” Swath width

Lawnaire 5 Aerator

• GX160 Honda engine• Cutting depth up to 2.5”• 18” Cutting width

18” Sod Cutter

• 8 HP Briggs and Stratton engine• 20” Tilling width• 8” Tilling depth

Pro Rear Tine Tiller

24” Hedge Trimmer

Earth Auger 8” Capacity

• 21.4 cc 2 cycle engine• Double-sided 24” cutter bar• 0.87 BHP

• 30.8 cc 2 cycle engine• 1.75 BHP• Quick stop auger break transmission lock

out for easy starts and easier “back out”

$39999 HS56-CE

$89999 BT121

RENTAL RATES (MM55)


$25 $90 $200

HS81T-24 24” Pro Series hedge trimmer, 22.7 cc $499.99FS130R Bike Handle Trimmer with straight shaft, 36.3 cc $399.99FS100RX 4-Mix trimmer with straight shaft, 31.4 cc $349.99FS38 Trimmer with curved shaft, 27.2 cc $129.99FS56RCE Trimmer with straight shaft, 27.2 cc w/ EZ Start $219.99

See Page 8 And 31 For More Stihl

11’ 5” Telescoping Pole Pruner

• 31.4 cc 2 cycle engine• 12” bar and chain• 16.3 lbs. with cutting attachment

$59999 HT101

• Rolled step prevents materials from accumulating under blade

• Wood/steel D grip fi ts gloved hand comfortable• 30” wood handle

• Heavy duty pan and hardware• North American hardwood handles• Rugged wheel assembly

$1875 BMTDS

$20955 BW6SNF D-Handle Square Point Shovel

6 Cu. Ft. Poly

Wheelbarrow with

Solid No-Flat Tire

13-093 D-handle square point shovel $23.2512-013 D-handle round point shovel $34.2513-039 Long handle round point shovel $28.00

RAKES

18-960 10 Tine Bedding Mulch Fork with 48” wood handle $32.7518-863 16 Tine bow rake with 60” handle $21.7519-237 24” Spring rake with wood handle $11.25

BW6S 6-cuft Brentwood Poly Pneumatic Wide Tire Wheelbarrow $189.55

GARDEN SPADE

12-302 D-handle ts garden spade $34.2515-771 D-handle garden spade w/29” fi berglass handle $34.00

• 8 cu.ft. capacity• Corrosion proof poly tray• Two 16” pneumatic tires

$12455 BP810

80738400 5-3/4 Cu. Ft. Poly wheelbarrow, 16” Wheel assem-bly with 2 ply tire and ball bearings $129.55

MP575FFBB 5-3/4 Cu. Ft. Poly wheelbarrow with flat free tire $130.55

RENTAL RATES (80638400 STEEL WHEELBARROW)


$15 $45 $90

80638400 6 Cu. Ft. Steel wheelbarrow M6 $97.55M6FFBB 6 Cu. Ft. Steel wheelbarrow with flat free tire $106.55J6 6 Cu. Ft. Steel wheelbarrow $91.75

Jackson Wheelbarrows

• 6 cu.ft. capacity• 16 gauge seamless tray• 16” wheel assembly with pneumatic

2-ply tire and ball bearings

M6

Wheel Barrows

• FLAT PROOF TIRE

• Light weight• Size 480/400 x 8.00

$4350 000357

Drain Spade

12-307 D-handle 14” turn step drain spade $34.2512-311 D-handle 16” drain spade with round point $34.2515-588 Fiberglass d-handle 16” drain spade $46.2512-340 D-handle 16” post spade with square bottom $34.25

82108 SureSpread Salt Spreader 100lb Professional Stainless Steel Push Spreader $250.00

Broadcast Spreaders And Lawn Rollers Available For Rental

140EX 4 oz. 12’6” X 360’ Non-Woven Filter Fabric - 500 sq.yd. $345.00GTF200 GTF-200 12’-6” X 432’ Filter Fabric - 600 sq.yd. $375.00

p g

$59999

ine

idth

rator

mulating

rtable

oint Shovel

RAKES

Rental Rates

Daily $65

Weekly $225

Monthly $565

Rental Rates

Daily $105

Weekly $380

Monthly $950

Rental Rates

Daily $75

Weekly $295

Monthly $795

SC18

12089

LA5

Filter Fabric

Custom Cuts

Available

4’ X 8’ Ground Protection Mat

• Easily supports 60-ton loads• Rugged 1/2” thick polyethylene • Leave turf smooth, even in soft

conditions

As Low As

$225$2250000Each For 10 or more

WM48S1 (White),WM48S1BLK

Rental Rates (WM48S1)


$12.50 $45.00 $115.00

city

• 27.2 cc engine• Handle folds for easy transport and storage• Throttle/start/stop controls built into the handle

$32999 MM55

Yard Boss Mini Cultivator

Optional Attachments:Lawn AeratorBed EdgerBolo Tine CultivatorLawn DethatcherBristle BrushPowerSweep™Weight Kit

dle

ltivator

• Heavy duty• Nortrth Ame• Rugged w

W

So

41St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

$25500 250

VEHICLE OUTFITTINGQuad Flash Strobe Light Class 2

Amber Quad Flash Strobe Light

$11500 Q625MA

$10200 Q550MA

• Magnetic mount• 75 lb. pull magnet• Meets DOT requirements for highway use

• Magnetic mount• 90 lb. pull magnet• 400 candelas/second

Economy Low-Profi le LED Mini-Bar - Magnet Mount

$23100 MMBSLEDFLM-CA

• Amber lens• 15’ cord with cig lighter plug• Magnetic base

$1950 CB25161 2-5/16” x 1” 10,000 lb. GTW

63889 2” x 3/4” Chrome hitch ball, 3,500 lb. TW/GTW $20.5003584 1-7/8” x 1” Chrome hitch ball, 2,000 lb. TW/GTW $15.75

Tie-Down System• 7’ x 1.5” polyester strap with hook• Zinc plated with yellow chromate for

extremely high weather protection• Fits Weather Guard® Racks

$9800 149RS1 Per Pair

149RS10 Complete barrel, hook, strap and knob replacement kit $33.90

Chrome Hitch Balls

• 10,000 lb. capacity• 2” x 27 ft. ratchet load binder• Flat zinc plated hooks

10R27FHY

40R15JK

Ratchet Load Binder

SPAN SET

• 2,500 lb. capacity• 1” x 15 ft. ratchet assembly• Includes J hook and keeper rings

• Fits 15 through 55 gallon drums with 2” opening• Dispenses approximately a pint per stroke

$4175 381 (4-5485)

Drum Pumps

NATIONAL SPENCER

• Fits 15 through 55 gallon drums with 2” bung opening• Dispensing gasoline, diesel fuel and similar light petroleum

products• Dispenses approximately 7-1/2 gallons per 100 revolutions

$7300 962 (4-4530)

Tie-Down Straps

60R20JK 2” Ratchet tie down, 6,000 lb. Capacity $26.50• Reduce the slams and bangs associated with

trailer towing during starting, stopping and towing over rough surfaces

$6795 149AMSSC4

CONVERT-A-BALL

• Exceeds the national standard SAE-J684 for ball hitches. V-5 rated SAFE!

• 10,000 lb. rating• Stainless steel

$6175 903SS

906SS 1” 2-Ball stainless steel 2” and 2-5/16” set $73.9580796 2-Way multi hitch with 2” and 2-5/16” ball $79.951496W Cushioned 6-way multi-hitch $117.00

4” Drop Cushioned Ball Mount

1” Reg. Shank With 1-7/8” And 2” Balls

• Fights all common fi res (Class ABC): wood, electrical, gas oil, fl ammable liquids, paper and cloth

• UL rated 1-A: 10-B:C• Easy to pull safety pin

$2925 466142

• Class 3A40BC• Multipurpose dry chemical• Includes wall hanger

$4595 FX340FC

$14700 TS2802TX20 2 Ply 2” X 20’

$21500 TS2803TX20 2 Ply 3” X 20’

3 Lb. Fireway Fire Extinguisher

5 Lb. Fire Extinguisher

466204 10 LB. Proline type ABC fi re extinguisher $80.50

420118 Fire extinguisher bracket for fi reaway 5, 10 & 110 DOT approved $9.75

46622701K Pro 2.5 MP Fire Extinguisher UL rated 1-A,10-B:C with vehicle mounting bracket

$49.50

Weekender® Ladder Rack• Easy on- easy off for that occasional need to

carry a ladder or long material• Fits fullsize and mini pickups• 250 lb. capacity

$33750 1450B

#7631 Leg Adapters Needed For 2004 Ford F-150

Full Size Van Racks• 12 gauge steel mounting base spreads the load for

maximum carrying capacity• Cross members are 14 gauge steel wall tubing• Adjustable tie down loops

$28000 149205

149211 Aluminum van rack with 2 cross members $432.00149209 White aluminum van rack w/2 cross members $395.00149216 3 Cross member van rack $420.00149210 Safari ladder rack $1040.00

1491211 Accessory side rails for 6.5’ Bed $520.001491215 Aluminum cross member for 1210 and 12111 $115.00

Custom Installations AvailableCall For Details

• 800 lb. load capacity• Fits full size pickup• Side rails optional

$71500 1491200

$56000 1491210 FITS 8’ BED

Accessory

Side Rails

Nylon Lifting Slings

2” X 27’ Ratchet Load Binder With U Hook

Tow-All Vehicle Strap with Tuff-Edge Webbing

EE1802X14 1 Ply 2” x 14’ nylon lifting sling $27.65EE1802X22 1 Ply 2” x 22’ nylon lifting sling $37.75EE1803X12 1 Ply 3” x 12’ nylon lifting sling $40.85EE1803X16 1 Ply 3” x 16’ nylon lifting sling $49.00EE2802X14 2 Ply 2” x 14’ nylon lifting sling $45.90EE2802X20 2 Ply 2” x 20’ nylon lifting sling $62.00EE2803X16 2 Ply 3” x 16’ nylon lifting sling $81.95EE2803X25 2 Ply 3” x 25’ nylon lifting sling $121.50EE2804X20 2 Ply 4” x 20’ nylon lifting sling $130.75

Large Selection Of 1 Ply And 2 Ply Lifting Slings In Stock

Truck And Van Racks

1475B Black Weekender® ladder rack $340.00

Interior Sliding Ladder Rack• Fits most vehicles including enclosed trailers

and Sprinter vans• Works with most ladders up to 8 ft. including

multi-position ladders• Includes side mounting capabilities

As Low As

$1955Per Binder for 2 or more

As Low As

$1400Per Strap for 6 or more

Triangle Refl ector Flare Warning Kit

$3975 1508TF

• Meets or exceeds all DOT standards and requirements of FMVSS125

• Easy to erect• Exclusive wire bracing controls

degree of tilt

s and

with 2” openinger stroke

ngm

EE

all tubing

er Racacccccccckkkkkkkkkkkk

000000000000000000000000000000

Q550M-R Red strobe light $102.00

$2175 26422

• 3,300 Working load limit• 10,000 lbs. Ultimate strength• Polyester



VEHICLE OUTFITTING & JOBSITE STORAGEAluminum Saddle Box

• Extreme protection locks

• 90° Cover opening• 12V pass-through

• 15.3 cu.ft. storage capacity

$77000 117-0-02

117-52-01 “Matte” Black aluminum saddle box $770.00127-0-02 Clear aluminum saddle box - shortbed f/s $705.00127-5-02 Black aluminum saddle box - shortbed f/s $695.00

Aluminum Side Box

• Armor-tuf clear coat• Extensive reinforcing and arc weld seams• 4.1 cu.ft. storage capacity

$51000 174-0-01

184-0-01 Clear aluminum lo-side box for full or mini $480.00149911 19” X 11” tray $37.00

Aluminum Hi-Side Box• Rain gutter design is fully weather stripped and provides a positive seal

against the weather• Armor-tuf clear coat• 10.8 cu.ft. storage capacity

$81000149390

Transfer Tanks• Interior baffl es to prevent fuel sloshing and provide extra

reinforcing• For full size pickups• 90 gallon capacity

$76550 149354

149358 100 Gallon transfer tank for full size pu $695.00149350 50 Gallon transfer tank for mini pickup $605.00149352 75 Gallon transfer tank for f/s short bed $705.0030A1 Manual pump for transfer tank $139.00928 12 Volt pump for transfer tank $430.00

48” Black Steel Underbed Box

$52000 149548B

• 9.1 cu. ft.• Door opening 14-1/2” x 46-1/4”• Black ARMOR-TUF® Powder Coat fi nish

Jobmaster® Cabinets

• 16 gauge steel construction• Double doors on front side• 47.5 cu.ft. storage capacity

$134000 149109

• 16 gauge steel construction• Double doors on front side• 54.9 cu.ft. storage capacity

$252000 149112

Hand Held Tool Boxes• 20” hand tool box• Tool tray included• Black powder coat fi nish for long life

$10500 149741

• 26” hand tool box• Tool tray included• Black powder coat fi nish for long life

$12000 149743

Storagemaster® Chests

• 48” Built-in ramp in front for loading large and bulky items

• 6” wide chest• 57.5 cu.ft. storage capacity

$145000 14991

Tool Trays

• Designed to suspend across the top of the opening on your JOBMASTER® Chest

• Small tools will not get lost

14921 Tool tray for 4824 $62.0014931 Tool tray for 4830 $67.0014941 Tool tray for 42, 36, and 32 $63.00

Jobmaster® Chests• Junk Trunk™ independent locking drawer• Watchman IV lock system 3 point latch

with recessed lock housing• 17 cu.ft. storage capacity

$85500 1494830-D

• 16 gauge steel construction• 3” high, 12 gauge steel skids raise

the unit for easy fork lifting• 15.25 cu.ft. storage capacity

$52000 1494824

• Includes 40” monitor, laser printer with airprint, two power strips, , Power Pass Electrical Pass Thru, USB hub, UPS back-up power supply, 4 GFCI outlets

• 57.6 cu.ft.

• Includes 32” monitor, UPS back-up power, supply, wiring harness and power strip, USB hub, 4 GFCI outlets

• 29.4 cu.ft.

• 16 gauge steel construction• 3” high, 12 gauge steel skids raise

the unit for easy fork lifting• 31 cu.ft. storage capacity

$5,50000 118-01

$3,10000 118-M

$81000 1493068

Casters

Data Vault Mobile Work Stations

149404 4” Casters (1,060 lb. Capacity)

149505 5” Casters (1,240 lb. Capacity)

149516 6” Casters with brake (3,500 lb. Capacity)

Aluminum All-Purpose Chest Full Size

• Armor-tuf clear coat• Fully arc welded seams• Angled body design is ideal for use with fi fth wheel and goose neck trailer

applications that require a full turning radius

$63700 664-0-01

Aluminum Boxes Available In

Black Or Clear Finish

Cab Screens

• These units are designed to protect the cab of the pickup from shifting loads in the cargo area

• Fits full-size pickups• Installation kits sold separatelyy

$28000 1906W WHITE

Pack Rat® Drawer Units

• Drawers have a 425 lb load rating• Drawer channels are 18 gauge steel• Top and sides are 14 gauge plate steel

$99500 307 (3 Compartments Wide)• Drawers have a 425 lb load rating• Drawer channels are 18 gauge steel• Top and sides are 14 gauge plate steel

$130000 338 (4 Compartments Wide)

308 3 Compartment pack rat drawer unit $1175.00300 Pack rat® bin dividers 6 per set $36.009012-3-01 Between the seat glove box $300.00

1905 Aluminum louver cab screen $370.001915-5 Mounting kit for Ford full size truck $92.251916-5 Mounting kit for Chevy full size truck $95.00

• 16 gauge steel construction• 4 drawers and a half width shelf• 800 lbs. storage capacity

$130000 14944

Rolling Work Bench

• 16 gauge steel construction• 12 gauge caster ready skids• 7 cu.ft. storage capacity

$37500 14936

• Extra-wide design• Fits all full size pickup trucks• Full weather seal• 8.8 cu.ft. storage capacity

• Textured Matte Black ARMOR-TUF® Powder Coat fi nish• Fits all full size pickup trucks• Full weather seal• 11.3 cu.ft. storage capacity

$70500 121-0-01

$69500 127-52-02

“Low Profile Design”

121-5-01 Low profi le black aluminum saddle box $705.00

arc weld seams

ing radiuspp p p

390Aluminum Boxes Available In

Bl k O Cl Fi i h

43St. Louis

(314) 544-1214 (800) 542-1214

Jeff erson City(573) 893-8786(800) 345-9154

Jackson(573) 204-0100(800) 599-9854

Wentzville(636) 327-8877(888) 999-6883

Troy, IL(618) 288-3400(888) 315-1100

LADDERS, SCAFFOLDING AND LIFTING EQUIPMENT

• Up to 650 lb. lift capacity• 24 ft. working height• Strong, lightweight aluminum

telescoping mast

Superlift™ Contractor Material Lift

Base Scaffold Unit5’ Tall X 5’ Wide X 7’ Long

Includes: Guard Rail, Casters And Scaffolding Deck

14 Day Rental $89.4828 Day Rental $127.81

Each Additional 5’ Section

14 Day Rental $16.1528 Day Rental $23.07

SCAFFOLD PLANKS

P21212 12’ $199.00

P21216 16’ $275.00

P21220 20’ $399.00

P21224 24’ $519.00

12” Wide, 2 - Man, 500 Lb. Working Load

P22016 16’ $399.00

P22020 20’ $575.00

20” Wide, 2 - Man, 500 Lb. Working Load

Hand Rail and Outriggers Available

• Built-in, skid-resistant surface reduces slips• Stores and transports in approximately half

its fully extended length• 250 lb. capacity

$26900 LP292116A

Aluminum Ladder Jacks

$10500 LP2100232-RUNG STYLE

Holds Stages And Planks Up To 20” Wide

$11200 LP2100133-RUNG STYLE

RENTAL RATES

DAILY $40

WEEKLY $165

MONTHLY $325

Self-Propelled Articulating Boom

8’ and 16’ Laminated Scaffold Boards Available

4 Wd Self-Propelled Scissor Lift With Outriggers

• 32 ft working height• 4WD with rough terrain tires • 1250 lb lift capacity

Rental Rates

Daily $175

Weekly $700

Monthly $2195

• 52 ft working height• 4WD with rough terrain tires• Dual fuel Gas and LPG• 5 ft jib boom

Rental Rates

Daily $295

Weekly $995

Monthly $2395

Z45/25JRT

GS2668RTO

SLC24

Heavy Duty FiberglassStep Ladders

Type 1AA375 Lb. Rated

FS1106HD 6’ $147.00

FS1108HD 8’ $196.00

FS1410HD 10’ $235.00

FS1412HD 12’ $279.00

Classic FiberglassStep Ladders

Type 1A 300 Lb. Rated

FS1504 4’ $72.00

FS1505 5’ $89.00

FS1506 6’ $79.55

FS1508 8’ $125.00

AluminumStep Ladders

300 Lb. Rating

AS1006 6’ $126.00

AS1008 8’ $160.00

Double Sided Fiberglass

Step LaddersType 1A

300 Lb. Rated

FM1504 4’ $119.00

FM1506 6’ $155.00

FM1508 8’ $214.00

Aluminum ExtensionLadders

Type 1A 300 Lb. RatedD-Rung, Two Section

AE2216 16’ $172.00

AE2220 20’ $209.00

AE2224 24’ $245.00

AE2228 28’ $305.00

AE2232 32’ $340.00

AE2236 36’ $410.00

AE2240 40’ $455.00

Fiberglass ExtensionLadders

Type 1A 300 Lb. RatedD-Rung, Two Section

Fiberglass ProPlatform Ladder


Fiberglass 2 in 1 Step Ladders


FE3216 16’ $175.00

FE3220 20’ $199.00

FE3224 24’ $229.00

FE3228 28’ $269.00

FE3232 32’ $339.00

FE7236 36’ $609.00

FE7240 40’ $670.00

• Two units maximum height of 12 ft., outriggers required over 6 ft.

• Fits through 30” door frames• One-person assembly

$23900 ST0606A

Fortruss 6’ Portable Steel Rolling Scaffold

RENTAL RATES (ST0606A)


$35 $115 $285Aluminum Telescoping Plank 10’ To 16’

Ladder Leverlers Available

Ladder Leverlers Available

FXP1704 4’ $159.00

FXP1706 6’ $199.00

FXS1506 6’ $87.55

FXS1508 8’ $125.55

Custom Logo Imprinting AvailableCall today for details on how you can get

your fiberglass ladders custom imprinted

with your Company Logo

Promote Your Company And Deter Theft

nu ITEMS

16” x 3-1/4” Elite Series Square End Mag Float

16” x 3-1/4” Elite Series Square End Mag Float

LED Inspectors™ Safety Glasses

Organic Vapor Cartridge / N95 Filters Combo Kit

P100 Combo Kit – BreatheMate™

BackSaver Concrete Drilling Attachment

16” x 4” Elite Series Five Star Trowel™ Carbon Steel Concrete Trowel

EP6 Ear Plugs With Carry Case

MagVibe PRO™ with QAS™ Mounting Plate

60” Flat Wire Texture Broom 5/8” Spacing

48”x5” Round End Fresno with All-Angle Bracket

60” x 5” Carbon Steel Fresno without Bracket

BreatheMate™ Respirator

• Cork Handle

• features a distinct grind on the working surface that gives concrete a smooth professional look.

• Proudly made in the USA.

• Cork Handle

• features a distinct grind on the working surface that gives concrete a smooth professional look.

• Proudly made in the USA.

• Ultra-bright built-in LED lights• High-impact resistant polycarbonate lens• 99.9% UV protection• Anti-fog and scratch resistant coating on lens

• Approved for use against organic vapor. Filters at least 95% of airborne particles.

• Includes 2 Organic Vapor Cartridges, and 2 N95 Particulate Filters

• Filters at least 99.97% of airborne particles.

• Strongly resistant to oil.• Includes: 2-P100 Particulate Filters

• Stand and work to help prevent back injury• Drill dowel bars more easily• Apply more pressure and use less energy• Increase productivity• Distances user from harmful silica dust

$2595CFE016K

$3395CFE279BK

$11955420-50

$995300-1061

$1295300-1081

$3495

CFE222K

$995Large 6128

$59955

CC498

$5295

CC199

$5295

CC853

$5295

CC835-01

$625

Large 311-3017

AQUAPHALT60 AquaPhalt 6.0 Pot Hole Repair 3.5 gallon pail $45.00

AQUATAMP AquaPhalt Tamper $250.00

• Cork Handle

• Features a precision ground edge that is “broke-in” and ready for immediate use.

• A special trowel holder protects the blade and features a hang hole for storage.

• NRR: 24• Ergonomic design and multi-fl anged stem conforms

to ear shape for maximum comfort and retention.• Low profi le design allows you to keep them in place

while wearing a helmet, hat

Revolutionary permanent asphalt and

concrete repair material for pothole

repair, pavement repair, utility cuts,

walkways, tennis courts and driveway

repair — it works even in wet and cold

conditions

Bucket Dolly with Casters

$5650

ST379

• Can be used with standard 3-1/2 to 5 gallon buckets• Five rubber wheels• 300 pound capacity

• Accepts 1-3/8” and 1-3/4” button bull fl oat handles.• The 18V built-in lithium battery has a 20 hour life

between charges and a battery life indicator.• The concrete vibrator is built into a double-tilt bracket

that attaches to Kraft bull fl oats with 4-hole brackets

• Broom produces a uniform rough groove surface on roads and bridges for max traction and water fl ow

• Bracket accepts all clevis handles• The snap-out, snap-in replaceable tines are blue spring

steel

• Made of high quality tempered steel for the perfect fi nish

• 360 degree all-angle bracket lets you work at any angle

• Designed to fi t EZY-Tilt® bracket (CC290) eliminates bending and lifting • Comfortable fi t and superior

protection• Lightweight material reduces user

fatigue• Unique head strap design allows for a

secure non-slip fi t• Includes: 1-Face Piece, 2-Retainers• Replaceable Cartridges and Filters sold separately

$449002005-53

G-Tek® NPG

Seamless Knit Nylon Glove with Polyurethane Coated Smooth Grip on Palm & Fingers

Viz™ Yellow ANSI Type R Class 3 Two-Piece Value Rainsuit Set

$3.25L, XL, XXL 33G125

$38.95S/M, L/XL, 2X/3X, 4X/5X

353-1000LY

$13.75Yellow/Orange M - XXXL

312-1250BLY/312-1250BOR

$12.55L, XL, XXL 33G125

12 Pair Bulk Pack

• Lightweight polyester with waterproof PU coating and taped seams

• Zipper closure with storm fl ap• Elastic waist pant with snap adjustable cuff • Concealable hood for extra protection

Class 2 Short Sleeve T-Shirt with 50+ UPF Sun Protection

irt tion

BackSaver attaches to the following drill models:

SDS Max Rotary Hammers:

Model# D25501K – 1 9/16”Model# D25601K – 1 3/4”Model# D25602K – 1 3/4”Model# D25603K – 1 3/4”*Model# D25701K – 1 7/8”*Model# D25721K – 1 7/8”*Model# D25723K – 1 7/8”*Model# D25761K – 2”*Model# D25762K – 2”Spline Rotary Hammer:

Model# D25553K – 1 9/16”Model# D25651K – 1 3/4”

CustomImprintingAvailable

Experience The Advantage

Documents

Transcript of Experience The Advantage