Endo Motor with Built-in Apex Locator

ecirp elbanosaer a rof eciohc tnellecxE

& Preloaded Complete Library of NiTi Rotary Systems

Key Features & Benefits:

Available modifications and principal characteristics

:

EndoEst-Motor is most versatile and complete endodontic motor with build-in apex locator for classical preparation technique by rotary nickel-titanium (NiTi) instruments . It has preloaded library of rotary settings for world famous NiTi systems (Dentsply Maillefer, Komet, VDW, FKG,

Endo Motor with Built-in Apex Locator& Preloaded Complete Library of NiTi Rotary Systems

1. The device works in three different modes : 1) Motor alone , 2) Apex Locator alone 3) Combined regime

2. The rotational speed is held constant for all until the preset torque is achieved.

3. During preparation the Automatic Torque Control gives an early feedback of increased friction and therefore reduces the risk of file breakage. Achievement of a preset Torque is accompanied by blue lighting on the end of tip and a special sound. .Once the preset torque is reached, the motor immediately stops or activates special reaction ( reverse or twist movement).* 4. Approaching and achievement of apex is accompanied by red light blinking on the end of handpiece and a special sound. Once the apex is reached, the file movement immediately stops or reverse (depend on operator choice). **

5. Display can be individually customized.

6.The battery-operated motor enables portable use and works regardless of power supply fluctuations. Reliable use of the device will continue without interruption even when the battery is charging.

SybronEndo, Sendoline, MicroMega, R&S). The software can be updated by Internet it with future endodontic innovations

Export manager: Dr. Efimchuk Viacheslav +7 (965) 269-09-72; geosoft_exp@geosoft.ru

ИМ05

for a longer return on your investment

It is fully programmable for individual preferences (6 buttons for activation of frequently used personal programs).

Technical characteristics Parameter

Speed range 150 to 600 rpm

Torque control range: 0,2 - 5,5 Ncm Management by On/Off handpiece button +

Connection of foot pedal possible Battery full recharging time 2,5 hours

Continuous use without recharge 6 hours

Automatic auto reverse or stop when at apex reaching +

Automatic auto reverse, stop or twist at preset torque reaching +

- Control unit - Micromotor «DC-НР»

-- Cable - Mains charger -

- File-clip - Modular stand for micromotor (module «Stand-Master», module «Stand-Satellite» and clean-stand for files) Lip clip

Cable USB-miniUSB - User's guide

Base Complete Set:

*

**