Electronics BBA MBA Project Report
-
Upload
prince-dudhatra -
Category
Documents
-
view
258 -
download
5
Transcript of Electronics BBA MBA Project Report
-
8/4/2019 Electronics BBA MBA Project Report
1/50
A
INDUSTRIAL VISIT REPORT
OF
SAMAY ELECTRONICS PVT. LTD.
-
8/4/2019 Electronics BBA MBA Project Report
2/50
Sr.
No. PARTICULARS PAGE
NO.
1. GENERAL INFORMANTION
2. PRODUCTION DEPARTMENT
3. PERSONNEL DEPARTMENT
4. MARKETING DEPARTMENT
5. FINANCE DEPARTMENT
6. SWOT ANALYSIS
7. FUTURE PLANE
8. SUGGESTION
9. CONCLUSION
10. BIBLIOGRAPHY
-
8/4/2019 Electronics BBA MBA Project Report
3/50
Sr.
No.PARTICULAR PAGE
NO.
1. INTRODUCTION
2. ORGANISATION STRUCTURE
3. FROM OF THE ORGANISATION
4. LOCATION JUSTIFICATION
INTRODUCTION
-
8/4/2019 Electronics BBA MBA Project Report
4/50
The company has commenced production from 1st oct. 1998
(vidyadasmi) with magnificent opening ceremony. The plant was
inaugurated by chief minister of Gujarat. Shri keshubhai Patel in
presence of eminent ministers & state men. The company has startedwith the production of 20,000 wall clocks & 10,000 time pieces per day.
The company production was started with work force of most of
them were female employees from nearest villages. Thus it has created
an employment opportunities for rural women.
ORGANISATION STRUCTURE
Industries are classified according to their size of unit.
-
8/4/2019 Electronics BBA MBA Project Report
5/50
Those are three types of the industries.
1. Small scale industries.
2. Medium scale industries.
3. Large scale industries.
Firm that invests within 3 crores is called small scale industries.
The firm which invest capital from 3 crores to 5 crores is called a
medium scale industries while the firm which invest above 5 crores is a
large scale industries.
SAMAY ELECTRONICS PVT. LTD. is a large scale industriesbecause it invest above 5 crores RS/ in fixed assets.
FROM OF THE ORGANISATION
There are many type of the organization in our country. The main
among them are the proprietorship, partnership, public ltd. company
etc.
-
8/4/2019 Electronics BBA MBA Project Report
6/50
SAMAY is pvt. Ltd. company there is board of directors who manage
whole company.
LOCATION JUSTIFICATION
Location is the main feature. It plays an important role in success
and failure of a business or company. There are many factors, which
affects the development of company.
SAMAY ELECTRONICS PVT. LTD. is situated at Rajkot district in
Morbi town on Rajkot Morbi highway. There are different advantages
of location.
Availability of raw materials
Transport facility easily available
Local labors available
There are two different sources of power supply
a. G.E.B.
b. They are their own generators.
The area covered by SAMAY ELECTRONICS PVT. LTD. 40
crores.
-
8/4/2019 Electronics BBA MBA Project Report
7/50
-
8/4/2019 Electronics BBA MBA Project Report
8/50
Sr.
No PARTICULAR Page
No.
1. INTRODUCTION
2. ORGANISATION STRUCTURE
3. RAW MATERIAL
4. PRODUCTION PROCESS
5. SCRAPE & WASTE MANAGEMENT
6. STORE MANAGEMENT
7. MACHINERY
INTRODUCTION
-
8/4/2019 Electronics BBA MBA Project Report
9/50
Production refers to the volume, value or quantity of goods &
services production in a given period by a worker, plant firm or
economy. It is the sum total of the result achieved by the various factors
used together. Therefore in other words, it could be said thatproduction is the process of transforming raw materials or purchased
components in to finished products for sale.
Production is a process by which goods & services in production
the products comprise a very important part if the organization. It is in
respects to the products that an industry/business can come in to the
market & establish itself.
ORGANISATION STRUCTURE
-
8/4/2019 Electronics BBA MBA Project Report
10/50
The organization structure plays an important role in the
production process. It affects the whole company if there is any defect
so the organizational structure effects. The production process it
increase on decrease the profit of the company so it should be veryaccurate.
At SEPL there is one supervision looking after 15 workers.
The following is the organizational chart of the company.
MANAGING DIRECTOR
(Mr. DILIP PATEL)
PRODUCTION MANAGER
ASSISTANT MANAGER
CHIEF ENGINEER
TECHNICAL HEAD
SUPERVISORS
( 1 SUPERVISOR FOR EVERY 15 WORKERS)
WORKER
RAW MATERIAL
-
8/4/2019 Electronics BBA MBA Project Report
11/50
Raw materials are the basic requirement for any of the
manufacturing firm. These RMs are then converted in to finished
goods by some processing.
The raw materials required by SEPL & places from where they
get them are given below. Most of the row materials are available in
India & only few essential materials are bought from outside.
The basic raw materials required are white & black
movement base & pvc plastics powder which are brought
from Rajasthan & Maharashtra
Another requirement is of plastic granules which arepurchased from foreign companies like L.G. & Dupont.
Color chemicals brought from Taiwan & local market
Transistor & capacitor are brought from Taiwan & Japan.
Glass is brought from hariyana, ankleshwar & Bihar.
I.C. & Crystal are imposed from Japan & Taiwan.
The speaker is also imported from Japan & Taiwan.
Battery supplied with wall clocks & time pieces is
purchased from novino-baroda.
Copper wire is imported from Malaysia & packing box &
crystal precision components are brought from Rajkot
Morbi & ahemadabad.
PRODUCTION PROCESS
-
8/4/2019 Electronics BBA MBA Project Report
12/50
SEPL is a manufacturing unit company manufacturing different
type of electronics clock & time pieces. The brand name of both items is
SAMAY industry have not all parts of the product but such parts and
machinery are practice from outside of country.
PRODUCTION PROCESS:
1) DESIGNING: -
Designing is the first step of to prepare the product. Based on
information technicians prepare design. For new model.
2)DYE MAKING: -
This is the next step in production process. After the design of the
new models to be launched is prepared by the designing department the
dyes are prepared for all the designs. For this purpose, some process is
made on HCSC material & the required shape is given to the metal &
thus the dye is prepared.
3) MOLDING: -
Molding means conversion of RM in to some specific shape or
MOULD. First o all the dye fitted in to various size of the mould.
Then this mould is fitted in the Cincinnati Milacron machine. Different
components such as gear, bobbin, needle & cabinet are manufactured
in this machine.
After the molding process, the unnecessary plastic is removed &
this plastic is recycled & use again.
4) CLEANING: -
After the frame is obtaining it is taken for cleaning. This is done
because during molding some dust particles remain on the frame
Applying air pressure with the help of the compressor does
cleaning of the frame. The female employees do the cleaning process.
-
8/4/2019 Electronics BBA MBA Project Report
13/50
5) FOILING: -
After the frame is cleaned, it is taken to foiling section. On the
foiling machine different colored foils such as golden, silver, black etc.
are pressed on the borders of the frame in order to decorate it. Thenumbers in the wall-clock are also foiled here. The foil used by
SAMAY is usually purchased form Taiwan & a few state of India.
6) GLASS CUTTING: -
In this stage first of all the glasses are cleaned with clean water.
Then these glasses are cut according to the shape of the mould. The
cutting is done completely on computerized machines. These glasses
are then transferred to the assembling department.
7) PRINTING: -
In this section the decoration on the glass is done. Also the
specification on the IC is printed here.
8) QUALITY: -
After the gear & other such minute parts are manufactured in
the Cincinnati machine, they are taken to the quality control
department. Here all the components are placed on the quality control
machine & are checked thoroughly. If there is any defeat in any of the
component, it is taken to the recycling machine & is converted back in
to plastic granules & is used again.
9) ASSEMBLING: -
In this process all the different part, which was mould as well as
imported are used & prepare complete product in assembling. Nowcomplete product comes out.
10) CHECKING: -
After the clock is assembled it is kept under a check for a few
days. If any problem is found in the working of the clock then the
trained technicians cure it. In this manner the quality of the clock is
maintained.
10) PACKING: -
-
8/4/2019 Electronics BBA MBA Project Report
14/50
After the checking process is over, all the faultless products are
taken for packing of the product is done according to the quality &
piece of the products. Products are packed in to different sized boxes.
11) LABLING: -
After the packing of the products is done the labels are put on the
packs there are certain things which are assume on the label and it is
regarding the type of wall-clock, model number, date of manufacture &
price.
-
8/4/2019 Electronics BBA MBA Project Report
15/50
SCRAPE & WASTE MANAGEMENT
Every company has out put of some amount of scrap & waste. So
the company have to manage the scrap & the waste products are not
affecting the environment on they are not creating pollution.
In SAMAY the scrap & waste management is done property
the scrap & waste which is coming out from the out put is refused is
sent to the municipal Lorries. Thus the company manager the scrap &
waste benign in view all the necessary factors.
STORE MANAGEMENT
Store management is second important component of physical
distribution. In SAMAY when the product is ready it is sate in store
room finally delivery at product to the channel and estimate stock
storage also helps balance demand and supply and stabilize the price.
-
8/4/2019 Electronics BBA MBA Project Report
16/50
MACHINERY
In order to produce a finished goods from the available RMs &
machineries are required. Hand made production can be done, but in
todays competitive world quick & large production is required which ispossibility only with the help of advanced machineries.
At SEPL the plant is required with modern sophisticated & world
famous machineries & modern computerized testing instruments & all
machineries are foreign collaborated. The name of various machines at
SEPL & their uses are given below:
1. SHAPER MACHINE: -
The machine is used to give shape to HCSC metal only square of
various shapes of various sizes can be given through this machine.
2. GRINDING MACHINE: -
This machine helps in mirror grinding of HCSC metal. Due to
this the metal surface becomes absolutely plain. There are two type
of grinding machine as surface grinder & tool-grinder.
3. MILLING MACHINE: -
In this machine, the square shaped metal is given various shapes.
Usually holes of different sizes are drilled through this machine. In
milling machine all the shape of the dies are given by the experience
workers. There are four milling machine there. It is three from
Taiwan & one from the Jamnagar.
4. ELECTRIC DEPTH CUTTING MACHINE: -
This machine helps in the preparation of the dye. In this
machine, copper material is put on the HCSC metal & then the
temperature is increases so that the dye of the require shaped can be
obtained.
-
8/4/2019 Electronics BBA MBA Project Report
17/50
CINCINNATI MILACRON MACHINE: -
This is the latest machine & is fully computerized various
component of the clock gear, bobbin & cabinet are manufacture inthis machine. Single machines are very important & costly & all of
them are from Taiwan & in SEPL have 35 pieces of that machine.
5. FOILING MACHINE: -
This machine is used to foil the mould in order to decorate it &
also to print no. on it. This machine is very important for decorate
the clocks & time pieces because by decorating the product we can
attract the customer & we provide the need of the customer.
6. LATHE MACHINE: -
This machine is imported from Nikon, Japan. This machine
helps in maintaining the quality of the products by helping in
eliminating even a little bit of defect in the various components.
7. LATHE MACHINE: -
Lathe machines are used to work side work as to make an ode of
the EDM machine, pins of the dies of the cabinet or the press roller
of the foiling machine so in SEPL lathe machines are used only
small work purpose.
8. PRINTING MACHINE: -
There are two types of the printing machines as manual &
automatic. All the machinery is from the Taiwan. Printing machines
are used to print the glass in the different colors & different shape.
-
8/4/2019 Electronics BBA MBA Project Report
18/50
Sr.
No PARTICULAR Page
No.
1. INTRODUCTION
2. ORGANISATION STRUCTURE
3. NO. OF EMPLOYEES
4. WORKING HOURS & CAPITAL
5. TRAINING
6. W & S ADMINISTRATION
7. PROMOTION & TRASFER
8. PERFORMANCE & APPRISAL
9. RECORD OF EMPLOYEES
INTRODUCTION
-
8/4/2019 Electronics BBA MBA Project Report
19/50
Personnel management is planning, organizing, directing,
staffing and controlling of the procurement development,
compensation, integration, maintenance and separation of human
resources to the end. Those individual organization and social
objectives are accomplished.
Personnel management is concerned with the human
relationship in business organization. Human efforts are mass
available by encouraging, training by providing necessary incentives to
worker to develop the business unit.
No. of employees working: -1500 (95 % female)
Mind your men & men will mind everything
ORGANISATION STRUCTURE
-
8/4/2019 Electronics BBA MBA Project Report
20/50
In order to solve the personnel problem efficiently and in a
responsible manner.
It has become necessary establish a separate personnel
department in the organization, which shall be responsible for
performing all the personnel function like efficiently, establishingsound and effective personnel policies, practices and programmer and
unbiased decision in the interest of labor and of organization.
Organization of personnel department in SAMAY can be seen
through the following chart
PERSONNEL MANAGER
DIRECTOR
DEPARTMENT MANAGER
SUPERVISOR
WORKERS
NO. OF EMPLOYEES
-
8/4/2019 Electronics BBA MBA Project Report
21/50
SAMAY QUARTZ providing the employment to around 1500
employees 95% of which are female employees. This has provided that
the great working capacity of women. The above figure of employees is
according to the year 2005, during the year 1998-99 the no. ofemployees were about 500 among that also 90% are female employees.
WORKING HOUR SHIPS
Time is money so the SAMAY believes in the very punctual
and discipline in time keeping system.
As SAMAY is clock manufacturing company (time measure) they
are very alert in time keeping system. The working hour
1. 07:30 am to 12:30 pm FIRST SHIT
2. 12:00 pm to 12:30 pm LUNCH TIME
3. 12:30 pm to 06:30 pm SECOND SHIT
These shifts are common for both workers and officers. Here major
of the workers is female and from villages area. After prayer, all theworker go to his or her department in each department first of all
worker is taken by supervisor.
TRAINING & DEVELOPMENT
-
8/4/2019 Electronics BBA MBA Project Report
22/50
In the training employee gets skilled, knowledge and ability. By
training the employee becomes more effective and competitive.
Therefore training is potential and vital necessary in the organization.
When the new workers perform their work the experienced and
qualified workers give them instruction and keep eye constantly on the
performance of new worker, SAMAY has a team to provide guidance
and training.
After the training is over if the management is satisfied with this
work, they become him permanent.
WAGES & SALARY ADMINISTRATION
-
8/4/2019 Electronics BBA MBA Project Report
23/50
Wages is the remuneration paid for the service of labour in
production. Wage usually refers to the hourly rate paid to such groups
as production & maintenance employees. On the other hand salary
normally refers to the weekly or monthly rate paid to clerical,administrative & professional employees.
The wages structure is determined on the basis of the skills &
abilities of an employee. The fundamental bases of wages payment are:
1) payment by time worked
2) payment for output
SEPL prefers time wage system. If provide daily wages to theworker & monthly it official employees.
If pays the wages according to the minimum wages act. Starting
from Rs. 60 & rising up to Rs. 150 per day. The wages salaries are
given on the 1st of every month. It also gives bonus to the workers on
festivals such as diwali, along with the wages.
In Samay the wages are paid according to the nature of work
assigned to the workers. All the workers have to perform different types
of the work some work like glass cutting furnishing due to which the
shape of glass in changed etc. are very risky and involves the possibility
of the frequent injury, so working in such department is rewarded
accordingly.
PROMOTION & APPRASIAL
-
8/4/2019 Electronics BBA MBA Project Report
24/50
PROMOTION:
A promotion is an upward advancement of an employee in anorganization to another job, which commands better pay status &
higher opportunities, responsibility, & authoritys better work
environment & facilities & higher rank.
In SAMAY there is no such special policy for promotion. But
here a special gradation method is adopted, according to which the
efficient workers can get higher grade & accordingly their pay scale is
increased.
APPRASIAL:
Performance appraisal is a systematic evaluation of personnel
by their supervisor or other who are familiar with their work
performance.
Performance appraisal helps in many important decisions, which
directly affect the individual & the organization efficiency. It ensures
that the right person is placed on that right job.
At SEPL the performance appraisal is done on monthly basis by
the supervisor. The supervisor keeps a watch on the workers under
them & then prepares a note on every worker under their supervision.
Then the supervisors give grades to the workers without any personal
bias on than these goals are accumulated at the end of the year.
On the basis of such performance appraisal an increased in the
pay as well as the promotion prospects are decided. Usually anincrement of Rs. 100 is made in the salaries of the employees. Thus,
because of this the employees are motivated to work better for the
organization.
RECORD OF EMPLOYEES
-
8/4/2019 Electronics BBA MBA Project Report
25/50
Records of employees are the record of up to date information
about the present employees of the organization. It is a reliable source
for the management to get information about employees at the time of
decision making regarding promotion, increment in wages, transfer,retirement, etc. this information are kept in the computers.
The basic information about personnel are:
1. Name
2. Fathers name
3. Age
4. Educational qualification
5. Date of appointment6. Information about family
Operating information:
1. wages in the beginning
2. increment in wages
3. transfer/promotion
4. departments name
5. leave records6. performance appraisal record
7. training & development
8. behavior, belongingness, willingness at work
9. regularity & sincerity
10.remark
-
8/4/2019 Electronics BBA MBA Project Report
26/50
-
8/4/2019 Electronics BBA MBA Project Report
27/50
SR.NO. PARTICULAR
1. INTRODUCTION
2. ORGANISATION STRUCTURE
3. SEGEMENTRATION
4. MARKET RESEARCH
5. PRODUCT& PRODUCT RELATED STRAIGIS
6. PRISING POLICY
7. PROMOTION POLICY
8. CHHANELS OF DISTRIBUTION
9. EXPORT
10. COMPETITIOR
11. INTERNATIONAL MARKETING
INTRODUCTION
-
8/4/2019 Electronics BBA MBA Project Report
28/50
Market is place where the transaction of buying and selling takes
place. In this place producers sell their product and consumers
purchase the purchase the products and satisfy their needs and wants.
Market is very narrow term compared to marketing. In
marketing all the activities i.e. form getting the idea and making
product available to consumer is covers.
SEPL working throughout world in India they are having 135
wholesale and 20,000 retail dealers through market share in India
around is 45%.
ORGANISATION CONTROL
-
8/4/2019 Electronics BBA MBA Project Report
29/50
In SAMAY ELECTRONICS PVT. LTD. marketing
department is there and all marketing functions are handled by
marketing department.
MARKETING MANAGER
DIRECTOR
DISTRUBUTION
CUSTOMERS
SAMAY has opened its own sales department in market for sales.
In the metropolitan cities like Hyderabad, Bombay, Calcutta and Delhi
the product of Samay is sold by dealers. They all are centralized under
marketing department and also marketing department contents to know
the market position. The product of Samay is sold all over in India only
through dealers.
-
8/4/2019 Electronics BBA MBA Project Report
30/50
SEGMENTATION
Market segmentation is the grouping of customers according to
such characteristics as income age, education, geographical location orarea.
SAMAY has segmented the market on the geographical basis i.e.
it has divided the market in to different geographical units such as
nations regions, states, cities, etc.
Bases of geographical segmentation are:
1. Rural2. Urban
SAMAY has segmented the market according to urban & rural
area. Its main concentration is on rural market as 60% to the
population of India is rural.
Its main consists of villages of India.
MARKET RESEARCH
-
8/4/2019 Electronics BBA MBA Project Report
31/50
Marketing research is concerned with the scientific collection
analysis & interpretation of facts relating to the market of goods &
services.
There are mainly three methods of marketing research as follow:
1. observation method
2. experimental method
3. survey method
SEPL prefers survey method, where they want to launch a new
model; they conduct a market survey to know the tastes & preferences
of the consumers & also to kind out which design is currently popularin the market.
The co. also monthly report from the entire authorized sales
department regarding the sales of the models. So by this, the company
gets in idea about which models. So by this, the company gets in idea
about which model to be produced more & which model produced less.
PRODUCTION & PRODUCT RELATED
STRAIGIES
-
8/4/2019 Electronics BBA MBA Project Report
32/50
Product means finished goods, which are for sale. Therefore
product is compete finished goods. SAMAY is producing following
products.
Clocks Time pieces
Telephones
Calculators
Home applications
Product planning is based on two factors 1- market environment 2-
management policy. Both affect the companys suppliers, customers
competitors, public physical, technology political, legal and social
cultural forces keeping in mind all these aspects of the marketingenvironment and policy etc. the management takes the important
decisions.
PRICING POLICY
According to economists, pricing is the exchange value of aproduct
-
8/4/2019 Electronics BBA MBA Project Report
33/50
At SEPL the prices are fixed on the basis of cost plus method &
going rate method, under cost plus method, cost of the product is
considered & under going rate method the prices & demand of the
competitors products are considered.
One of the most important attributes of the pricing policy of the
SAMAY is the stability of price. The price of wall-clocks & time pieces
are quit stable in nature & do not keep changing frequently.
Components of the price of SAMAY wall clocks.
1. 5% Advertisement expenses
2. 5% Administrative expenses3. 30 % sales tax & Conroy
4. 40% to 45% cost of product, raw material
5. 15% to 20% profit margin
PROMOTION MIX / ADV
-
8/4/2019 Electronics BBA MBA Project Report
34/50
All those activities done by the co. that helps to increase the sale
of the company can be called sales promotion activities.
These are two types of sales promotion.
1. At consumer level
2. At dealer level
SAMAY does not prefer sales promotion at consumer level. They
believe that their prices are so low & the quality is so good that the
consumers do not need any extra incentives to purchase their products.
SAMAY entertains sales promotion a dealer level. They offer
gifts, discounts.
CHHANLE OF DISTRIBUTION
-
8/4/2019 Electronics BBA MBA Project Report
35/50
Channel of distribution are considered to be the most important
element among all the elements of marketing mix. The main function
of this element is to find out appropriate ways through goods are to be
made available to the markets. Channel of distribution may be definedas the means through which thing move from the producers or
manufactures to the ultimate consumer of industrial users. Distribution
channels create time & place utilities.
SAMAYS channel of distribution:
COMPANY
DISTRIBUTION
DEALERS
CUSTOMERS
-
8/4/2019 Electronics BBA MBA Project Report
36/50
SAMAY has widely speared distribution channel in India consisting of
135 authorized sales depots & services centers over 26,000 dealers. The
no. o authorized sales depots & service centers in various states are as
under.
Maharashtra & Goa
North zone
Uttar Pradesh
Assam & north east
Gujarat
West Bengal
Madhya Pradesh
Andhra Pradesh
Gujarat West Bengal
Madhya Pradesh
Andhra Pradesh
Kerala
Tamil nadu
Bihar
Karnataka
Orrisa
Mode of transport
SEPL distribution its products all over the India through
roadways, as it is a cheap & easily available means transport.
In case of distribution of product to other countries. SAMAY
prefers waterways as a mode of transport.
EXPORT
-
8/4/2019 Electronics BBA MBA Project Report
37/50
SAMAY is well known name not only in India market but in the
global market precision in implementation of the factory infrastructure,
plant & machinery & setting up of marketing network. Its aim was to
combine with the top class professional competency & practical ability
to take on any situation on its stride. The manufacture watches for the year 2000 was 30,000 quartz clocks per second, which they have
achieved successfully & in year 2001 they reached their target up to
40,000 quartz clocks per second. By now, the coverage of SEPL has
crossed the level 30% of its total production spread over more than 60
countries. Its scintillating performance can be gauged from the fact
that if exported clocks/time pieces in ten 40 feet high cube containers in
a single day.
COMPETITIOR
Now a day we would found the competition every where. In
clocks, there is also competition. SAMAY has many competitors like
Ajanta, Orpat, Titan & more company.
INTERNATIONAL MARKETING
-
8/4/2019 Electronics BBA MBA Project Report
38/50
The demand of the companys products is very much in India as
well as in foreign countries. There fore it exports its products in many
foreign countries. SAMAY exports its products in more than 60
countries like Singapore, Australia, Iran, south Africa, Russia,
Zimbabwe etc. SAMAY export 30% of its total production.
Now a day SAMAY is the largest clock manufacture and the
people of foreign countries are more attracted toward its products.
Companys sales in different years are as follows:
a. 1999-2000.28 crores (approx)
b. 2000-2001.48 crores (approx)c. 2001-2002.50 crores(approx)
d. 2002-2003.60 crores(approx)
e. 2003-2004.70 crores(approx)
f. 2004-2005.100 crores (approx)
g. 2005-2006.....125 crores(approx)
PLACE
SAMAY sales its product in all over India.
It has segmented market on the basis of geography because there
are many producers in India who are producing well clocks with music
and Samay produces.
Companys market is at national level as well as international
level e.g. Bombay, Delhi, Calcutta, Australia, U.A.E., Bangladesh,
Russia etc.
-
8/4/2019 Electronics BBA MBA Project Report
39/50
Sr.
No.
PARTICULAR
PAGE
NO.
1. INTRODUCTION
2. ORGANISATION STRUCTURE
3. FINANCIAL PLANNING
4. CAPITALIZATION
5. CAPITAL STRUCTURE
6. W/C MANAGEMENT
7. RECEIVABLE MANAGEMENT
8. CASH
9. PROFIT & PROFITABILITY
INTRODUCTION
Finance is the blood of business. Every organization requires
finance for setting up industries, it is running and working for the day
-
8/4/2019 Electronics BBA MBA Project Report
40/50
to day activities, for its expansion, development, for achieving its
objective when objectives can be achieved successfully it gives the
perfect pictures of better functioning of an organization therefore it is
said that finance department is the mirror of an company.
The department also makes forecasting of finance required in
future and also decides finance which will be required for future
expansions, decides fix and working capital to be kept in future.
According to henry ford money is an arm or either use in
or lose it
Loan :
Banker: state bank of Saurashtra
ORGANISATION STRUCTURE
Finance is the part & parcel of business. It is base for startingany business activities, but finance is scare resource. So management
-
8/4/2019 Electronics BBA MBA Project Report
41/50
of finance becomes essential. A part from this financial decision have
got vital importance in any firm. So it also proves it essential to setup
management system. For sound management efficient organization is
precondition where all the financial are performed in scientific &
systematic way.
CHIEF EXCUTIVE
(Mr. MANUBHAI V. PATEL)
HEAD OF DEPARTMENT
ACCOUNT
CASHIER
FINANCIAL PLANNING
Financial planning is a pre-requisite for the smooth functioning
of finance department and for the purpose of growth and expansion of
-
8/4/2019 Electronics BBA MBA Project Report
42/50
business activities. The financial plan represents blue print of what a
firm purposes to do in the future. There are two types of financial
plans:
1. long term financial planning2. short term financial planning
The term long term financial planning is formulated for the
expansion of business for starting new unit. For developing new
products, for modernization of the unit & for the purpose of sales of
fixed rate.
The short term financial planning is formulated for the smooth
functioning of the day to day business operations. For the payment ofmiscellaneous expenditure like salary, wage etc. expanses or looses,
also for meeting unexpected expanses or looses.
CAPITALIZATION
SAMAY ELECTRONIC PVT. LTD. had 35 crores as initial
capital and now it has about 70 crores total investment and companys
-
8/4/2019 Electronics BBA MBA Project Report
43/50
turnover is 60 crores (approx) right now, company has borrowed the
money through loan from state bank of Saurashtra and they also paid
interest on the loan.
Capitalization means the total amount raised where as capitalstructure-regrets and show that how much amount is collected through
which securities i.e. debt funds/equity funds.
CAPITAL STRUCTURE
Capital structure represents the mix of different sources of long-
term funds in the total capitalization of the company.
Capital structure is the permant financing of the company
represented primary by the long tern debt and shareholders fund but it
excludes the short term credits. A firm should try to maintain on
optimum capital structure which maximum the value of a companys
share in the market.
RECEIVABLE MANAGEMENT
-
8/4/2019 Electronics BBA MBA Project Report
44/50
Credit sale has become common today because of increasing
competition it serves as teal for increasing sales of the company.
SAMAY sells its products to authorized dealers & also provides
them facility of credit in some circumstances which makes entry ofreceivable management comes in to existence. In case of SAMAY the
concern gets timely debtors and the firm is good and management of
receivable is proper.
CASH
Cash management deals with managing the cash flows of the
organization most of the business organization determine the level of
cash which is to be kept in the business.
But so far as SAMAY is concerned it doesnt determine the level
of management.
PROFIT & PROFITABILITY
-
8/4/2019 Electronics BBA MBA Project Report
45/50
This company is earning profit. Now companys total turnover is
60 crores (approx) and the net profit of the company is 5.24 crores
(approx). The reason behind it is that they are produces of quality and
standard goods and they have monopoly over market.
SWOT ANLYSIS
-
8/4/2019 Electronics BBA MBA Project Report
46/50
STRENGTHS
1. complete product range of wall clocks & table clocks
2. A highly sophisticated plant.
3. A new electronics product range will be manufactured
in nearest future.
WEAKNESS
1. The general recession in the industry had affected theperformance of the companys opportunities.
2. global marketing
3. diversification & expansion
TREATS
1. Company is subject to competition from the otherestablished companys in this segment, both domestic as
well as overseas.
2. Adverse changes in government policies have an
adverse effect on profitability of the company.
FUTURE PLAN
-
8/4/2019 Electronics BBA MBA Project Report
47/50
SAMAY ELECTRONICS has a bright future let us all hope &
wish.
It future product planning includes many electronics items, it
new product SOGO TILES. A Sogo tile is the new product of theSAMAY ELECTRONICS PVT. LTD.
SUGGESSTION
-
8/4/2019 Electronics BBA MBA Project Report
48/50
After going through the training at SAMAY ELECTRONICS
PVT. LTD. I feel every promotional & organization activity is properly
determined objectivities or goal.
There is nothing to suggest to this type of large scale unit as thecompany has already designed all the activities to bring the companys
product to favorable attention of customers.
So, SAMAY ELECTRONICS PVT. LTD. has speaking future.
CONCLUSIONS
-
8/4/2019 Electronics BBA MBA Project Report
49/50
In conclusions, I would like to say that SAMAY ELECTRONICS
PVT. LTD. is making a very good reputation. It is management is very
good.
The company has efficiency and smooth going personneldepartment. The employees are very good in nature. Relationship with
the bank, debtors, creditors, officers & others.
The overall performance of SAMAY ELECTRONICS PVT. LTD.
is really good.
At least, I am very glad to declare this report. This report is
conduced with all the best wishes for the growth & prosperity of
SAMAY in the coming years.
BIBLIGRAPHY
-
8/4/2019 Electronics BBA MBA Project Report
50/50
Books: -
Principle & practice management
L.M. Prasad
Modern Business Organization & Management
S.A. Sarleker
Visit on www.samayquartz.com
http://www.samayquartz.com/http://www.samayquartz.com/