CONCEALED HINGES 35 mm cup, 11mm cup depth · CABINETMAKERS (fax) 703 -4216333 (ph) 6331 6.1...

CABINETMAKERS SUPPLY www.cabinetmakerssupply.net (fax) 703-421-6333 (ph) 703-421-6331

6.1

CONCEALED HINGES 35 mm cup, 11mm cup depth

94° 110° ARM APPLICATION

C7R6AD9 soft close dowel (13.5mm depth) C2P7A99 C2P6A99 self closing screw

C2R4A99 free swinging dowel FULL OVERLAY C2R6A99 self closing dowel C279A99 self closing rapido (cam) C2PPA99 push open screw

----------------------------------------------------------------------------------------------------------------------------- ----------------- 1/2” OVERLAY C2P4D99 free swinging screw C2R4D99 free swinging dowel C2R6D99 self closing dowel

----------------------------------------------------------------------------------------------------------------------- ----------------------- C2P5G99 C2P4G99 free swinging screw HALF OVERLAY

C2P7G99 self closing screw C2R5G99 C2R4G99 free swinging dowel

C2R6G99 self closing dowel C279G99 self closing rapido (cam) C2J6G99 self closing logica (flip)

----------------------------------------------------------------------------------------------------------------------------- ----------------- C2P4P99 free swinging screw INSET C2P6P99 self closing screw

C2R6P99 self closing dowel

165° 110° ARM APPLICATION

C2PFA99 CBP2A99 self closing screw C2REA99 free swinging dowel C2RFA99 self closing dowel FULL OVERLAY

---------------------------------------------------------------------------------------------------------------------------------------------- CBP2A99 self closing screw C2REG99 free swinging dowel HALF OVERLAY

---------------------------------------------------------------------------------------------------------------------------------------------- C2PFP99 CBP2A99 self closing screw C2REP99 free swinging dowel C2RFP99 self closing dowel INSET


6.2

CONCEALED HINGES 40 mm cup, 13 mm cup depth

94° ARM APPLICATION FULL OVERLAY

CFA5A99 free swinging screw CFA7A99 self closing screw ----------------------------------------------------------------------------------------------------------------- ----------------------------- HALF OVERLAY

CFA5G99 free swinging screw CFA7G99 self closing screw ----------------------------------------------------------------------------------------------------------------------------- ----------------- INSET

CFA5P99 free swinging screw CFA7P99 self closing screw ----------------------------------------------------------------------------------------------------------------------------- ----------------- C2C7A39 self closing glass door 26mm cup for glass 1/4” thick

P2CBAX3 black bullet shaped P2CBA06 chrome {cover plates P2CBA08 brass { for P2CBA09 stainless steel { hinges

---------------------------------------------------------------------------------------------------------------------------------------------------------

Minimum panel (or face frame) width – 1” FFHINSETNP Hinge Boss depth 12 mm, self-closing

___________________________________________________________________________________________ AS PICTURED +30° -45° +45° APPLICATION C2P7N99AC screw BLIND CORNER

------------------------------------------------------------------------------------------------------------------------ --------------------------------- C2R7W99 dowel C2R7H99 dowel

C2P7M99AC ANGLE +30° or +/-45°

----------------------------------------------------------------------------------------------------------------------------- ---------------------------- C2PYA99 screw PIE CORNER


6.3

BASE PLATES

BASE 0mm 2mm 3mm 6mm 9mm 12mm 18mm Screw-on

Screw-in, Euro B2RGE09/16d BARGPC9/16 screws, pre- BARGR29/16 BAVGEC9F

mounted, die cast (Fig. 1) BARGP99/16

------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Screw-in die cast BAR3R09 BAR3R39 (Fig. 2) BAR3R69 BAV3EC9F BAV3EV9FX

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Fig. 1 Fig. 2 ___________________________________________________________________________________________ FACE FRAME ADAPTER PLATES

BASE 1mm 4mm Side panel 3/4” 5/8”

overlay overlay 10 x 48 screw-in, steel BAU3L19 BAU3L49

----------------------------------------------------------------------------------------------------------------------------- ---------------- 7 x 32 INSET screw-in die cast BAL3R59

___________________________________________________________________________________________ VARIABLE ANGLE BASEPLATES B2V3BW9R15X-7.5° to 7.5° B2V3BW9/15 0° to +15° B2V3BW9S/15 +10° to +30°


6.4

FACE FRAME HINGES, 35mm diameter, 11mm cup depth except XR are 12mm cup depth. Screw on.

Overlay 106°

1/4” CSP3Y99 5/16” CSP3Z99 3/8” CSP3999

----------------------------------------------------------------------------------------------------------------------------------- 1/2” CSP3799XR 5/8” CSP3599XR 3/4” CSP3499XR 1” CSP3299XR 1-1/4” CSP3A99NR 1-5/16” CSP3B99PR 1-3/8” CSP3C99NR

________________________________________________________________________________________

HINGEFF1-3/8

1-3/8” minimum overlay Hinge screws to face of face frame. (Not a Salice hinge)

________________________________________________________________________________________ Stock No. Color SMOVELITE Orange SMOVEMED Beige SMOVESTRONG Gray

Used to cushion closing action of hinges and slides D071SN0

Used to ideally locate D066SNBN smove based on door

Beige Smove adapter size. for all Salice Euro hinges.

____________________________________________________________________________________

DPMB289 DP80SNB SPACEBALLS Release device for push hinges & slides. Used in raised panel doors Housing for push release device. to prevent splitting & vibrations.

165CLIP Reduction clip for 165º Hinges. Limits the opening to 110º. Sold in box of 50.

S2R66OXY DOWELS packed 1000/bx 8mm for Salice frameless hinges.


6.5

PIE-CUT CORNER HINGE, FREE SWINGING, 78º, PIE CORNER DOOR SITUATION

Designed for revolving shelf kitchen cabinet installations

Meets all design requirements for three-way adjustability, quick mounting, concealed installation and sturdy construction

Adjustable to allow a small air circulation gap.

Zinc die-cast, nickel-plated

Stock # W-w/o Dowels Hinge Arm Packaging Primary Application

PIECORFSS w/o dowels free swinging each pie-corner ___________________________________________________________________________________________ FOLDING DOOR HINGE WITH OFFSET PIVOT OPENING ANGLE 180º Pivot offset adjustment in steps of 0 mm, 3 mm and 6 mm with 5mm K distance. The reveal is adjustable from hairline to +4 mm. The mounting is always flush. Identical hole pattern for both doors, hinge parts are mounted separately. Nickel-plated die-cast zinc. HINGEEUROBI

__________________________________________________________________________________________________

SEMI-CONCEALED HINGE Suitable for: 16mm door / 16mm panel 19mm door / 19 mm panel Features:

Clip-on door wing

270º door opening

Spring loaded door catch

Easy height adjustment

Zinc die-cast

Note: spacer required for 5/8” overlay Finishes: Nickel & Brass 270FSNP 270FSBP

Drill 35mm hole centered 13.5mm from door edge.

Example: For 3 mm reveal: Pivot Offset Door Offset 0 mm 0 mm 3 mm 6 mm 6 mm 12 mm


6.6

BUMPER PADS - use 1/16" thickness pads with all frameless Salice hinges and CABSUP slides.

Pads/ Thick- Stock Number Material Sheet ness Color .12BROWN silicone 80 1/8" brown 1/16BUMPER silicone 450 .085" clear 1/8BUMPER silicone 200 .15” clear *HDBUMPER rubber 100/bag .335” black .12WHITE foam 54/sheet 1/8” white

*Center-drilled for securing with screws _____________________________________________

POZIBIT These are the drivers recommended to tighten all screws on Salice hinges. It is amazing - tighten as tightly as possible with a Phillips driver, then try a pozi-driver. It will be possible to tighten an additional 1/4 turn - minimum. Sold in multiples of 12. _____________________________________________

This heavy duty hinge is for flush mounting of glass doors 6-8mm in thickness. Recess the top and bottom panel in accordance with mounting hole

diagram. Screw the recess parts on to top and bottom panel. Doors open 95 degrees. Screws sold separately 5X5/8.

nickel plate GLASSFLUSHNP polished gold GLASSFLUSHBP

This door hinge is designed for glass thickness up to 5mm (3/16"), though it may also be used for 1/4" glass by not using the enclosed pressure plates, installing the hinges, applying CLEARSILICON to the channel, then inserting glass and bracing into place while CLEARSILICON dries. A pair (enough for one door) includes 2 hinge parts, 2 self-adhesive pressure plates, 2 plastic bushings and 4 set screw. nickel plate GLASSINSETNP brass plate GLASSINSETBP _________________________________________ This overlay hinge is for glass thickness from 5mm (3/16") to 6.3mm (1/4”). The hinge overlays 1/2” at the side, and 1/8” at top and bottom. A pair (enough for 1 door) consists of 2 hinge parts with attached mounting bracket, 2 set screws and 2

cushioning pads. Doors open 210. Hinge has a stay close “snap”. Sold by the pair, order screws 3X17PHAB (ant. brass), or 3X17PHZP (zinc) separately. Nickel plate GLASSOVERNP Brass plate GLASSOVERBP

(See also Salice hinges for bored glass doors on page 6.2)


6.7

D2A7XCXCP – Orange poziscrew driver with non-replaceable tip, comfortable resin handle. Sold individually. __________________________________________ 5MMDOWEL Drilled for 5mm Euroscrews, but now need to install regular screws? These dowels measure 5mm xAmm, 5 strips of 20 in a bag = 100/bag.

__________________________________________ SQUARE OVERLAY DOORS

Closing Screws Stock # Finish Action Needed 205PCH pol. chrome self w/ screws 205AB ant. brass self 5X1/2AB 5X5/8OHPB 205PB pol. brass self 5X5/8PB 205SN sat. nickel self order separately __________________________________________ 3/8 INSET DOORS surface mount Closing Screws Stock # Finish Action Needed 3/8INSETPCH pol. chrome self 5X5/8NP 3/8INSETPB pol. Brass self 5X5/8OHPB 3/8INSETAB ant. Brass self 5X5/8OHAB

3/8 INSET DOORS - wrap mount Closing Screws Screws Stock # Finish Action Needed 3/8INWRAPAB ant. brass self 5X5/8OHAB 3/8INWRAPPC pol. Chrome self 5X5/8NP 3/8INWRAPPB pol. brass self 5X5/8OHPB __________________________________________ NON-MORTISE HINGES

Closing Screws Leaf Stock # Finish Action Needed Pin Width NM3PB brite brass free loose 1-3/16 NM3ZC zinc plate free loose 1-3/16 NM31/2 brite brass free w/screws

NM4 dull brass free w/screws

_______________________________________________

Closing Screws Leaf Stock # Finish Action Needed Pin Width NM21/2 ant brass free #5 flat tight 5/8”

_______________________________________________

FOLDING SCREEN HINGE, BRASS PLATED w/screws Size For Material Stock # Length x Width Thickness SCREEN3/4BP 1-3/4” x 3/4” 3/4” SCREEN11/8BP 2” x 1-1/8” 1-1/8” SCREEN11/4BP 2” x 1-1/4” 1-1/4”


6.8

1/4” OVERLAY DOORS Closing Screws Stock # Finish Action Needed 1/4SCBP brass plate self 5x5/8OHPB 1/4SCAB ant. brass self 5x5/8OHAB 1/4SCPC pol. chrome self 5x5/8NP __________________________________________ 1/2” OVERLAY DOORS Closing Screws Screws Stock # Finish Action Needed 1/2SCBP brass plate self 5x5/8OHPB 1/2SCAB ant. brass self 5x5/8OHAB 1/2SCPC pol chrome self 5x5/8NP __________________________________________ VARIABLE OVERLAY HINGE Closing Stock # Finish Action Screws VOSCBP brass plate self 5x5/8OHPB VOSCAB ant brass self included

INSET DOOR PIVOT HINGE

Closing Stock # Finish Action Screws HINGEPIVIN Satin free S/S


6.9

CONTINUOUS PIANO HINGES - steel, polished plate BRASS or NICKEL. (1-1/2” x 72” available in solid brass with polished finish; 1-1/2” & 2” available in stainless steel.) 1-1/2x96BPPH Open Width Length Leaf Uses v v Thickness Screw 11/16X72BPPH .040 5X ___ 11/16X72NPPH .040 5X ___ 11/2X72SBPH* .040 4X ___ 11/2X72SSPH* .040 11/2X96BPPH .040 5X ___ 11/2X96NPPH .040 5X ___ 2X72BPPH .045 6X ___ 2X72NPPH .045 5X ___ 2X72SSPH* .045 3X96BPPH .050 6X ___ 3X96NPPH .050 6X ___

*all have pin of same material, use 6X5/8PSSSC stainless screws with stainless hinges. __________________________________________ Ever wonder where those really heavy pivot hinges come from that you see in commercial applications, for heavy weight, hi-frequency cafe doors. Here they are. Double action - weight of door closes door. Maximum door width - 30". Maximum door weight - 75 lbs. Jam bracket is 1-1/4" wide. Door thickness – 7/8” to 1-5/8”. Stock No. Finish Hold Open Screws GRAVITYNO26D dull chrome no w/screws GRAVITYHO26D dull chrome yes, 90º w/screws ______________________________________________

GRAVITY PIVOT HINGES, S150C4, satin brass finish. These

are the sturdiest hinges we’ve found for low-weight, low-frequency café doors. Screws included. - Designed for quiet, carefree operation of louver or dwarf doors - 3/4" to 1-3/8” thick - Returns door to center of opening automatically by gravity - Holds door open at 90º on either side of opening - Door weight carried on tough, silent nylon bearings -1 bag does 2 doors

PIVOT HINGES (screws included) for doors to 7/8”. Stock Number Finish Overlay S331ZP brite zinc Variable S332ZP brite zinc 23/32” 331 332 __________________________________________

HINGE333AB

Top and bottom 270° pivot hinges. Extra-wide throw accommodates up to 1” door. May also be used in through-the-door slot. Steel, antique brass. __________________________________________

HINGE334NP Top and bottom Pivot hinges. For kitchen cabinets and utility use. Steel, nickel or bronze plated. For doors up to 1-1/8””


6.10

The TRASHHINGE is for doors 9/16” to 3/4” thick. The

door sloses with its own weight, rather than with a spring that tends to cause the door to “grab” the tray. Chrome and/or black with screws, depending on availability.

______________________________________________

SPRINGBOLT (For Trash Door Hinge). The Bolt is retracted, door positioned, and bolt allowed to spring out - into pre-drilled hole. When released, door closes on its own weight and returns to center position each time. Zinc plate - uses no screws. Drill a 35mm finger access hole at back of door centered 2-1/2” from edge, 2” from top and 15mm deep. From edge of door, drill 3/8” hole to intersect first hole. Spring bolt is 2-1/2” long with 5/8” retraction. __________________________________________ S1592426DHT is designed for heavy duty use and/or heavy cabinet doors. Elongated screw holes for vertical and lateral alignment. Stocked in dull chrome finish.Uses # 8 screws with hospital tips. Door Frame Frame Reveal Thickness Offset Leaf (w/o mortise) 3/4” 3/4” 1-3/8” 1/4” _________________________________________ HEAVY STRAP HINGES zinc plated without screws 4STRAPHINGE 6STRAPHINGE

LIGHT BUTT HINGES - five knuckle, except 1-1/2” is 3 knuckle. These are nice Stanley hinges. Stock # Size Finish Pin (L x W) S29523 2 x 1-13/16 dull brass loose S29511/226 1-1/2 x 1-3/8 pol. chrome loose __________________________________________ LIGHT NARROW BUTT HINGE with screws, low-priced hinges. Size Finish Pin PB89521/2 2-1/2x1-11/16 dull brass loose PB8953X2 3x2 dull brass loose PC8953X2 3X2 brite zinc loose TWO HINGES IN ONE – Multi-purpose reversing hinges. A unique loose pin hinge that changes from a flush inset door hinge (drawing “A”) to an overlay door hinge (drawing “B”) by removing the pin and reversing the small leaf. Inset door opens 180º and overlay door opens 270º. Steel thickness is .054 S1584C3 Brass plate S1584C26 Chrome plate


6.11

MICO TRUE-LOCK HIDDEN HINGES available in configurations for lip doors, and overlay doors. Hinges are suitable for residential kitchen cabinets, have nylon washers which provide smooth, quiet action, and are four way adjustable (up-down, left-right). Sold by the pair. Order screws and felt pads separately.

__________________________________________

For Overlay, Flush, or Recessed Doors 1-3/8" to 1-3/4" thick, weighing up to 150 lbs.

S327C26D Dull Chrome

SCREW-ON HINGES

For 90º door opening without drilling holes, without using mounting plates. Heavy duty case-hardened steel exceeds NOBOREEURO

ANSI-BFMA specifications.

One hinge fits all door conditions, six-way adjustable, no machining, lay-on mounting. Spring closing, zinc-plated.

NOBOREEURO175 For 175 degree door opening _________________________________________

S342US26D – Dull chrome steel plated

• For overlay doors 1-1/8" (28.6 mm) to 1-3/8" (35 mm) thick doors not exceeding 75 lbs. (34 Kg) • Designed for mullion or face frame mounting • Suitable for floor-to-ceiling doors • Doors can be opened 180º • Elongated screw holes for easy alignment • Mortised door leaves – Standard practice

• Bushings at the pivot point, assure smooth , silent operation • Non-handed

NOBOREEUROFF

Face frame application


6.12

These Bommer hinges are double acting and are self-centering from both directions with a tension regulator (for the thickness/size of door) which also controls the speed of the door closing. Door flange is mortised into edge of door. Jamb flange is surface the jamb, so no hanging strip is required. Non-handed, non-template. When three hinges are used, the center hinge should be installed as close as possible to the top hinge. Screws provided. 2 hinge 2 hinge 3 hinge 3 hinge Minimum Door Stock Hinge Door Weight Maximum Weight Maximum Height for Number Length Thickness Rating Width Rating Width Weight Shown B3029-4US26D 4" 7/8"-1-1/4" 60 lbs 2'-4" 75 lbs 3'-0" 6'-8" B3029-4US4 4" 7/8"-1-1/4" 60 lbs 2'-4" 75 lbs 3'-0" 6'-8" B3029-5US4 5" 1-1/8"-1-1/2" 65 lbs 2'-8" 93 lbs 3'-0" 6'-8"

B3029-5US26D 5” 1-1/8”-1-1/2” 65 lbs 2'-8" 93 lbs 3'-0" 6'-8" 876PB5 5” 1-1/8"-1-1/2" imported substitute for above w/66% capacity of Bommer hinges B3029-6US4 6" 1-1/4"-1-3/4" 75 lbs 2'-8" 107 lbs 3'-0" 7’-0" B3029-6USD 6” 1-1/4"-1-3/4" 75 lbs 2'-8" 107 lbs 3'-0" 7’-0"

B3029-5US26D not stocked, special order ______________________________________________________________________________________________________

For light duty (louvered cafe doors, etc.), use B1515HUS4 for doors 1-1/8" to 1-1/2" thick. Hinges have a hold open feature. Door flange may be mortised or surface applied. The jamb flange is surface applied. Hinges are non-handed, nontemplate. Sold individually, satin brass finish. Maximum door width -18" Maximum weight -18 lbs. Minimum height - 42" * non-stock, by special order ______________________________________________________________________________________________________

SOSS INVISIBLE HINGES - if unsure as to how many hinges to use, call for recommendations.

DULL BRASS DULL CHROME PLATE PLATE DEPTH OF CLEARANCE WOOD SCREWS HINGE GAP LENGTH WIDTH MORTISE WHEN OPEN THICKNESS CLOSED SOSS218P4 SOSS218P26D 4-5/8” 1-1/8” 1-19/32” 27/32” 1-3/4” 10X1-1/2 3/64” SOSS216P4 SOSS216P26D 4-5/8” 1” 1-7/8” 23/32” 1-3/8” 14X1-1/2 1/16” SOSS212P4 SOSS212P26D 3-3/4” 3/4” 1-5/64” 17/32” 1-1/8” 10X1-1/4 3/64” SOSS208P4 SOSS208P26D 2-3/4” 5/8” 29/32” 29/64” 1” 8X1-1/4 3/64” SOSS204P4 SOSS204P26D 2-3/8” 1/2” 23/32” 23/64" 3/4” 7X1-1/4 1/16” SOSS101P4* 1-11/16” 3/8” 31/64” 19/64” 1/2” 5X3/4” 1/32” * Non-load bearing

Templates are carried for the 204 and higher number Soss hinge. Templates require a bushing with an O.D. of 3/4” and maximum distance past base of 9/16”. Porter-Cable Guide 42024 and 42237 (lock nut) meet these requirements. Additionally, a 1/2” inch diameter straight plunge cut (like 1073 or 1055 or 1025, 1026) is used for all hinge installations.

BUSHNUT – Porter Cable

Guide 42024 & 42237 locknut, sold together in a bag.

CONCEALED HINGES 35 mm cup, 11mm cup depth · CABINETMAKERS (fax) 703 -4216333 (ph) 6331 6.1...

Documents

Transcript of CONCEALED HINGES 35 mm cup, 11mm cup depth · CABINETMAKERS (fax) 703 -4216333 (ph) 6331 6.1...