SWAMI PARMANAND COLLEGE OF ENGINEERING & TECHNOLOGYSIX MONTHS INDUSTRIAL TRAINING REPORTON

NETWORKING (MCSE & CCNA)AT

JETKING SEC 34 , CHANDIGARHSUBMITTED AS A PART OF COURSE CURRICULUM

BACHELOR OF TECHNOLOGYIN

ELECTRONICS & COMMUNICATION ENGINEERINGUnder the Guidance of Mr. Baljit singh Mr. Inder Gulati Submitted To: Er. Harpreet Kaur (HOD) Submitted By: Saroj Dogra (697041917)

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING SWAMI PAMANAND COLLEGE OF ENGINEERING & TECHNOLOGY, DERA BASSI, MOHALI

ACKNOWLEDGEMENT

I feel deeply indedted to Mr. Baljit Singh, Microsoft trainer who delivered valuable lesson on MCSE, his indepth knowledge about the subject helped me understand the subject in better way. His method of teaching the minute details helped me a lot to acquire the insight into the subject. I am also grateful to Mr. Inder Gulati, CCNA trainer for giving best knowledge about CCNA.the way he instilled knowledge of the subject was undoubtly praise worthy and valuable. I am also thankful to Jetking institution as a whole that is doing yeomans service by teaching the learner avreast with the computer , networking and hardware knowledge that is the need of the day. I will be failing in my duty if I do not acknowledge my husband Mr. Nardev Singh Rana who always stood by my side during my studies. I am indepted to my sons Anirudh Rana and Romil Rana who never clamed my time and get bore by my long absence rather silent. Last but not the least, I thank all my classmates at Jetking for extending kind co-operation.

SAROJ DOGRA

List of Figures

Figure No.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Name of FigureComputer network Local Area Nework LAN Classification Campus Area Network Metropolitan Area Network To find location of a computer using FQDN Tree structure Structure of domain forest and domain tree Multi-Master Mode Parent child relationship model Direct Sharing Scenario ICS scenario Scenario of win proxy server NAT Server VPN server LAN routing Static routing

Page No.6 9 9 10 11 24 25 36 37 40 43 44 45 46 48 52 53

18 19 20 21 22 23 24 25 26 105 27 28 29

Architecture of router Variable Subnet Mask Scenario of Telnet Scenario of Static Routing Routing table Routing table of covered networks Routing loops OSPF Scenario VLAN Operation VTP Configuration VTP Pruning IEEE 802.11 Standard

60 75 76 81 86 86 87 99

110 111 114

List of tables

Table No.1 23

Name of tableDifference between Workgroup & Domain Comparison between IPv4 and IPv6 Address Classes Category and Speed of UTP cables Colour Coding for straight Cable Colour Coding for Crossover cable Colour Coding for Rollover Cable Operating Systems Difference between Workgroup and Domain

Page No.7

12 13 17 18 19 20 21 34 56 62 63 71 72 74 86 90 91

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Exchange Server with different operating systems Router interfaces and connectors Router Ports Default address mask in binary & dotted decimals Decimal and Binary values of subnet mask Subnet mask, valid hosts, broadcast address Routing table Difference between RIPV1 & RIPV2 Difference between IGRP and RIP

CONTENTS

Sr. No.1 1.1 2 3 3.1

TopicINTRODUCTION Company Profile LITERATURE RIEVIEW NETWORKING Introduction to networking

Page No.1 1 5 6 6 6 8 12 12 15 15 17 20 20 22 23 26 28 29 31 33 34 40 42

3.1.1 Models of Networking 3.1.2 Categories of network 3.2 IP ADDRESSES and MAC Addresses 3.2.1 IPAddressClasses 3.2.2 MAC Addressing 3.3 NETWORKING MEDIA 3.3.1 Ethernet Cabling

3.4 OPERATING SYSTEM 3.4.1 Types of Operating Systems 3.5 DNS SERVER 3.5.1 PARTS OF DNS SYSTEM 3.5.2 DNS Zone 3.6 DHCP SERVER 3.6.1 Working of DHCP Server 3.6.2 InstallationStepsofDHCPServer 3.7 ACTIVE DIRECTORY 3.7.1ActiveDirectoryServices 3.7.2 3.8 CHILD DOMAIN INTERNET SHAREING

3.8.1 Direct Sharing 3.8.2 ICS (Internet Connection Sharing) 3.8.3 Win Proxy Server 3.8.4 NAT (Network Address Translation) 3.9 VIRTUAL PRIVATE NETWORK (VPN) 3.9.1 3.9.2 3.10 ROUTING 3.10.1 Types of Routing 3.11 EXCHANGE SERVER 3.11.1 Elements of Exchange Server 3.11.2 3.11.3 Exchange Version Requirements for Exchange Server VPN components Types of VPN

42 43 45 45 47 48 49 51 51 56 56 56 57 57 58 60 60 62 63 65 66 70 70 73 75

3.12 Open System Interconnection (OSI) Model 3.12.1 Description of Different Layers 3.13 ROUTERS 3.13.1 Router Architecture and its Key Component 3.13.2 Router Interfaces & Ports 3.13.3 Modes of Router 3.13.4 Configuring Password 3.13.5 Managing Configuration 3.14 SUBNETTING 3.14.1 3.15 TELNET Advantages of subnetting 3.14.2 Types of Subnetting

3.15.1 To Access the Device Remotely

75

3.15.2 Commands to assign IP addresses to the interfaces 76 3.16 ROUTING 3.16.1 TYPES OF ROUTING 3.16.2 Routing Protocol Basics 3.1.3 R IP (Routing Information Protocol) 3.1.4 IGRP ( Interior Gateway Protocol) 3.1.5 EIGRP(Enhanced Interior Routing Protocol) 3.1.6 OSPF (Open Shortest Path First) 3.17 LAN SWITCHING 3.17.1 SWITCH 3.17.1.1 3.17.1.2 3.18 VLAN (Virtual LAN) Vlan Trunking Protocol (VTP) 79 79 84 88 91 93 95 100 100 103 108 113 113 114 115 117 118

Wi-Fi (WIRELESS FIDELITY) 3.18.1 Wireless LAN 3.18.2 Wireless Standards 3.18.3 Wireless Security

4 5

CONCLUSION REFRENCES

1. INTRODUCTIONThis project report pertains to six months industrial training that I had underwent at JETKING, Chandigarh as part of curriculum of degree in Bachelor of technology in Electronics and Communication engineering as required by Swami Parmanand College of engineering and technology (affiliated to Punjab Technical University, Jalandhar) . I learnt a lot from professional managers and skilled engineers. I had a great learning experience as trainee in this firm. I learnt a lot about how different networks are controlled in the industry or any department with the help of networking processes, under MCSE and CCNA. I have learnt about different type of servers like DHCP Server, DNS Server, NAT Server. Also I have learnt how to control the LAN and MAN networks under MCSE (Microsoft Certified System Engineers) and how to control MAN and WAN networks under CCNA (CISCO Certified System Engineers). Justification cannot be done to whatever I have learnt in these six months within a few pages but I have still tried my best to cover as much as possible in this report. In this report I have tried to sum up the technical knowledge I have gained in my six months of training.

1.1

Company ProfileJetking is an organization came into establishment in1947. Jetking is Indias

number one Computer Hardware and Networking Institute.

Birth and EvolutionIt took a lot of failure before mankind tasted technological success. Jetking evolved in tune with the changing face of technology. During 55 years in the field of electronic technology. Jetking successfully trained thousands of students to overcome failure for high paying careers.

1947 1962 1972 1986

Birth Pioneered Do-It-Yourself Kits in India Introduced Asia- 72, Fairchild and Wildcat transistors Became a Public Limited Company and also introduced entertainment electronics product-T.V sets, Two-in-ones and amplifiers.

1990 1993 1994 1995 1996 1997 1998 1999 2003

Launched Jetking School of Electronics Technology Network of Jetking training centers spread all over India Opening of Jetking, Chandigarh Tie-up with Heath kit Educational System (U.S.A.) Introduced advanced courses on Pentium, Notebooks, Modems, Email/Internet, LAN 4.X Novell Education Academic Partner Representative for International Correspondence School (ICS), USA in India Added cyber technology to the curriculum ISO 9001-2000 company and Authorized Microsoft online testing centre (VUE) for MS, CISCO, MCSA, MCSE, CCNA, A+ etc.

Mr. Suresh G. Bharwani is the CHAIRMAN and MANAGING Director of Jetking Infotrain Ltd. Indias leading Computer Hardware and Networking Institute. With the vision to promote and the conviction to deliver the widespread propagation of computer hardware and networking education across the nation, Mr. Bharwani was the first to set up an training institute offering innovative courses in computer hardware in 1990. Jetkings core competency lies in providing complete training and developing hardware engineers and professionals with sound technical knowledge. It focuses on the overall development of personality of an individual with emphasis on personality development, presentation and communication skills, leadership skills etc. Jetking has established more than 125 operational centers and 250 faculties across the country and has trained over 3,50,000 students who have move onto the crave

success- full career. With its alumni placed in the best of organizations in India and some abroad, Jetking,s vocational training and placement promises has helped build the career prospects of many young boys and girls. The company has been awarded the ISO 9000:2000 certification in 2003.The company has been awarded the Maharashtra IT Award for a key role in manpower activities in year 2006-07,it was felicitated with Franchise Award as Best Franchisor for the year 2007-08.Also,ranked 4th in the list of 26th hot franchises as per outlook money magazine. Mr. Suresh Bharwani was awarded with Pikes Peak Award by the Bob Pike Group USA for effective implementing smart lab plus for making technical training fun, faster and easier for non- technical person. Across all the sectors, industries are upgrading their information technology system. Industries ranging from plastics, chemicals, textiles and power to the automotive and telecom sector are now IT savy. Government and public sectors are going hi-tech with EDI and computer networks. The IT industry, software companies, data centers, ITenabled services providers are all equipped with advance IT system and networks. The increasing number of call centers, BPOs etc., have given a further boost to the hardware and networking industry. The courses in jetking comprises lecture and theory session, with a great focus on active participation through smart lab plus ,that focuses on audio visual and learning with hands-on training and equips students with an in depth domain knowledge that is technical; it also equips students with soft skills ,to face the multi-faceted challenges of corporate world. PLACEMENT: Jetking is the first and only institute that promises the 100% jobs guarantee to its students. The companies that have recruited jetkings students include: Samsung, Sun Micro system, IBM, Canon, Siement, reliance, TATA, Compaq HP invent, IT-T solutions, Videsh Sanchar Nigam Limited, D-Link, Novell, Dell, Wipro, LG, ICIC Infotech and several other MNCs.

Any student who has qualified his or her HSC/SSC examination is eligible to take up a course at jetking. The one year program Jetking certified hardware and networking professionals give 680 hours of in-depth knowledge to a student in Basic electronics and computer applications. Computer hardware and peripherals, window 2003 administrator and network administrator (soon it will be replaced with window server 2008).Apart frame technical knowledge there are personality development sessions which groom the students personality, their ability to perform better. Jetking, Indias leading hardware and networking training institute has trained over 3,00,000 students from its 125 centers spread across India. With its alumni placed in the best of organizations in India and some abroad, Jetking vocational training and placement promises has helped build the career prospects of many young boys and girls. Jetking has partnered with some of the worlds most renowed names in networking to provide you with cutting edge courses and technologies. With academic partnerships with Microsoft, Comp TIA,LINUX, NOVELL, and person VUE . Jetking Chandigarh is a division of Hi-Tech point. Hi-Tech point is an ISO 90012000 IT company. It was established in year 1993 and run by a company of IT professionals. Jetking Chandigarh branch is considered to be the best centre among all centers. It has bagged number 1 center award consecutively for last 7 years. Here training on various fields is going on like Basic Electronic, Hardware, Networking, JCHNP Analog and Digital electronics and Hardware, RHCE, RHCSS, MNA, MCSE (Microsoft System Engineers), MCITP, MNA, CCNA (CISCO Certified Network Associate), CCNP(CISCO Certified Network Professional). Partnership with industry leaders like Microsoft and Red Hat Jetking ensure its students authentic courseware and technology.

2.

LITERATURE RIEVIEW

Computer Networking is a very vast project in the present developing era of electronics and communication. Now a days, computers are used in a wider range. All the organizations are using multiple computers within their departments to perform their day to day work. Computer network allows the user to share data , share folders and files with other users connected in a network. Computer Networking has bound the world in a very small area with it wide networking processes like LAN, MAN, WAN. The courses in jetking comprises lecture and theory session, with a great focus on active participation through smart lab plus ,that focuses on audio visual and learning with hands-on training and equips students with an in depth domain knowledge that is technical; it also equips students with soft skills ,to face the multi-faceted challenges of corporate world.

3. NETWORKING3.1 Introduction to networkingNetworking is a practice of linking of two or more computing devices such as PCs, printers, faxes etc., with each other Connection between two devices is through physical media or logical media to share information, data and resources. Networks are made with the hardware and software.

Cable/media

Fig 1: computer network

3.1.1 Models of NetworkingModel means the connectivity of two computers. We have many types of networking models. (i) (ii) (iii) Client Server Model Peer to Peer Model (Workgroup Model) Domain Model

(i)

Client Server Model In a Client server model we have one server and many clients. A Client can share

the resources of server, but a server cannot share the resources on clients. On the point of view of administrator its very easy to control the network because we combine with the server also at security point of view. It is very useful because it uses user level security in which users have to remember only one password to share the resources. (ii) Peer to Peer Model (Workgroup Model) In Peer to Peer networking model all computers are in equal status, that is we cannot manage centralization, administration secutity. In Peer to Perr networking client use operating system like Window 98, Window XP, Window 2000, Window Vista. (iii) Domain Model It is a mixture of client server and peer-to-peer model. In this clients can share their resources as peer-to-peer but with the permission of the server as in client server model therefore it is commonly used model because in this security is more as we can put restriction on both server and clients.

Difference between Workgroup & Domain Table 1 Workgroup Domain

1. It is a peer to peer networking model. computers are in equal status.

1. It is a server based networking model. computer called domain controller which

2. There is no client and no server. All the 2. There is a centralized dedicated server

controls all other computers called clients. 3. This model is recommended for small 3. This model is recommended for large networks, upto 10 computers. separately. networks. each PC can be administrated and managed from the server. 5. In this model, low grade OS like 5. in this model high grade OS like WIN 2000/XP professional, WIN 98 etc. can be 2000/2003 Server can be used. used. 6. Users accounts are created in each PC 6. Users accounts are created on the server and are called as Local Users. side and are called Domain Users. 4. There is no centralized administrated 4. There is centralized administration and

3.1.2 Categories of networkNetworks can be categorized as per geographical area to be covered by the network. Computer network are divided into four categories includes: Local Area Network (LAN), Campus Area Network (CAN), Metropolitan Area Network (MAN) and Wide Area Network (WAN). 3.1.2.1 Local Area Network (LAN) LAN is a computer network that is used to connect computers and work station to share data and resources such as printers or faxes. LAN is restricted to a small area such as home, office or college. Devices used in LAN are : HUB and switch. Media for LAN is UTP cables. Figure 1.2 shows how all work stations, server and printer are interconnected with the help of the network device.

Fig 2: Local Area Network Types of LAN In LANs, data can be transferred using techniques like token passing. As per techniques used for data sharing, LANS are classified into Ethernet, Token Bus, Token Ring and Fiber Distributed Data Interface (FDDI).Figure 3.3 shows LAN classification.

Fig 3: LAN classification

Advantages of LAN a). Provides communication in smaller networks, easy to install and configure. b). many users can share data or network elements at the same time which results in fast work. Disadvantages of LAN a). limited number of computers are connected in a LAN. b). LAN cannot cover large area. c). Network performance degrades as the number of users exceeds.

3.1.2.2 Campus Area Network (CAN)Campus Area Network is a computer network made up of two or more LANs within a limited area. It can cover many buildings in an area. The main feature of CAN is that all of the computers which are connected together have some relationship to each other e.g. different buildings in a campus can be connected using different CAN. It will help to interconnect academic departments, library and computer laboratories. CAN is larger than LAN but smaller than WAN. Figure 3.4 shows a CAN network.

Fig 4: Campus Area Network Devices used in CAN are : HUB, Switch, Layer-3 switch, Access Point .And the media used for CAN is Unshielded twisted pair of cables and Fiber Optics Cable.

3.1.2.3

Metropolitan Area Network (MAN)

MAN is the interconnection of networks in a city. MAN is not owned by a single organization. It act as a high speed network to allow sharing resources with in a city. MAN can also be formed by connecting remote LANs through telephone lines or radio links. MAN supports data and voice transmission. The best example of MAN is cable T.V network in a city.

Fig 5 : Metropolitan Area Network

3.1.2.4

Wide Area Network (WAN)WAN covers a wide geographical area which include multiple computers or

LANs. It connects computer networks through public networks like, telephone system, microwave, satellite link or leased line. Most of the WANs use leased lines for internet access as they provide faster data transfer. WAN helps an organization to establish network between all its departments and offices located in the same or different cities. It also enables communication between the organization and rest world. Devices used in WAN is only Router

3.2 IP ADDRESSES and MAC AddressesIt is also called as logical addresses. IP is a 32 bit long and it is divided into 4 octets and dot (.) is used to separate one octet from another. It is represented in the form of decimals. There are two versions of IP addresses: IPv4 IPv6 Table 2 Comparison between IPv4 and IPv6

IPv4 It is 32 bit long. It is divided into 4 octets. Ipv4 performs broadcasting, multicasting and unicasting. IPv4 is divided into 5 classes: A to E. IPv4 is in decimal form. -

IPv6 It is 128 bit long. It is divided into 16 octets. IPv6 doesnt it support performs broadcasting,

multicasting and unicasting. Ipv6 doesnt support classes. IPv6 is in hexadecimal form.

3.2.1 IP Address ClassesIP address is a 32 bit address. It is divided into various classes namely Class A, Class B, Class C, Class D and Class E. TCP/IP defines Class D for experimental purpose. TCP /IP address contains two addresses embedded within one IP address; Network address and host address as shown in figure 3.1

NETWORK ADDRESS 0 bits

HOST ADDRESS 31 bits

Class A consists of 8-bit network ID and 24-bit host ID. Class B consists of 16bit network ID and 16-bit of host ID. And Class C consists of 24-bit of network ID and 8-bit of host ID. Address Classes Table 3: Address Classes Addres s Class Starting Bits (first-byte) Range of First Mask Value Octet Valid Hosts

Class A 0

1to 127

255.0.0.0

256*256*256-2= 16,777,214

Class B

10

128 to 191

255.255.0.0

256*256-2=65,534

Class C

110

192 to 223

255.255.255.0 256-2

Class D 1110

224 to 239

Reserved for multicasting

Class E `

1111

240 to 255

Reserved development

for

research

and

3.2.1.1 How to Assign IP Address to ComputerAn IP address assigned to a computer may either be permanent address or address that is assigned to a computer on a time lease or for temporary basis. Hence, the address granted to computers is divided into two categories Dynamic IP addresses and Static addresses. Dynamic IP Addresses Dynamic IP addresses are assigned to the devices that require temporary connectivity to the network or non-permanent devices such as portable computer. The most common protocol used for assigning Dynamic IP address is DHCP also called

Dynamic Host Configuration Protocol. The DHCP grants IP address to the computer on lease basis. Static IP Addresses Static IP addresses are assigned to the device on the network whose existence in the network remains for a longer duration. These static IP addresses are semi-permanent IP addresses which remain allocated to a specific device for longer time e.g. Server.

3.2.1.2 How to Configure IP Address in window 2003 Right click on My Network Places- properties right click on working LAN card- properties select internet protocol (TCP/IP) -properties Tick on- Use the following IP addresses - now fill the IP address e.g 10.0.0.1 Tick on Use the following DNS server address Fill the preferred DNS server 10.0.0.1 Ok Close

Now check the connectivity of computer with itself with command Start-run-cmd-ping 10.0.0.1

3.2.2 MAC AddressingMAC address is a hardware address that is embedded in the NIC card. It is also known as hardware address or physical address. Every NIC card has a unique MAC address assigned by IEEE. MAC address is used to identify the nodes at lower levels of OSI model. The MAC address operates at the data link layer of the OSI model. MAC address is a 12 digit hexadecimal number (48 bit address). It is made up of numbers from 0-9 or a letter from A-F. MAC address can be written in any one of the formats: MM:MM:MM:SS:SS:SS

MM:MM:MM:SS:SS:SS

T o identify the MAC address in window: Click Start Run Enter cmd in the Open text book Type ipconfig /all Press Enter

The 12 digit MAC address will be shown as say 00:11:11:EA:8D:F6

3.3

NETWORKING MEDIA

To do networking we need to use some type of media. There are many types of media. (i) (ii) (iii) (iv) (iv) Coaxial Cable Fiber optic cable Twisted Pair of Cables Micro- wave Satellite

Coaxial Cable Coaxial cable consists of an insulated copper conductor surrounded by a tube shaped copper braid outer copper tune and the inner conductor have the same axis of curvature hence it called coaxial cable. It is basically of two types: (i) (ii) Base Band Cable (RG 59) Broad Band Cable (RG 58)

We used Base Band signal cable in Networking of Computers, It is so called because it carries single frequency. Its speed is 10 Mbps and impedance is 50 . Where as Broad

Band Cables carries multiple frequencies. Connector used for Coaxial cable is BNC(British Novel Connector) connector. ARCnet uses RG-62 coaxial cable. It has an impedance of 93 and has a comparatively lesser attenuation, hence yield greater distances. These cables are expensive and provide high propagation factor.

Fiber Optical Cable Fiber optic cable consists of a very fine fiber made from two types of glass, one for the inner core and the other for the outer layer. Here signal is transmitted in the form of light. Different varieties of fiber optics is used depending on the size of the network. Single mode fiber optics is used for networks spanning longer distance. Fiber Optics has lower propagation factor than coaxial cable. It is a costly but more secure transmission media. Twisted Pair Cable There are two wires, which are twisted with each other to avoid EMI (Electro Magnetic Induction).these cables are easy to terminate. However they have a slightly higher value of attenuation value and hence have limited distance covering capacity. Connector used for Twisted Pair of Cable is (Registered Jack) RJ-45 and RJ-11. There are two types of twisted pair of cables: STP (Shielded Twisted Pair): In this an extra wire which is called shielded wire is wrapped over the inner cover which holds copper in pairs. This protection is used to protect signal from external noise. UTP (Unshielded Twisted Pair) In this type of wire no shielded cover is there for extra protection from noise. There are different categories of UTP cables:

Categories of UTP Cables Table 4: Category and Speed of UTP cables

Category

Speed

CAT-1 CAT-2 CAT-3 CAT-4 CAT-5 CAT-6 CAT-7

56 Kbps 4 Mbps 10 Mbps 16-20 Mbps 100 Mbps 1Gbps 1Gbps

3.3.1

Ethernet CablingStraight cable Crossover cable Rolled cable

There are three types of Ethernet cables:

3.3.1.1 Straight cableIt is used when we have to connect PC TO Switch PC to Hub Hub to Router Switch to Router

Colour Coding for straight Cable TABLE 5

568A (one end) Green/white Green Orange/white Blue Blue/white Orange Brown/white Brown (other end) Green/white Green Orange/white Blue Blue/white Orange Brown/white Brown (one end) Orange/white Orange Green/white Blue Blue/white Green Brown/white Brown

568B (other end) Orange/white Orange Green/white Blue Blue/white Green Brown/white Brown

3.3.1.2 Crossover CableIt is used when we have to connect: PC to PC Hub to Hub Switch to switch Router to Router PC to Router Hub to Switch

Colour Coding for Crossover cable Table 6 Colour Coding for Crossover cable

(one end)

(other end)

Orange/white Orange Green/white Blue Blue/white Green Brown/white Brown

Green/white Green Orange/white Blue Blue/white Green Brown/white Brown

3.3.1.3 Rollover CableRollover cable isnt used to connect any Ethernet connections together, but Rollover cable can be used to connect a host to a router console serial communication (com) port. NOTE: Straight cable and Cross cables are used for data transfer but Rollover cables are not used for data transfer. There are two methods for manufacturing Rollover cables:

Table 7 Colour Coding for Rollover Cable

568A (one end) (other end) (one end)

568B (other end)

Green/white Green Orange/white Blue Blue/white Orange Brown/white Brown

Brown Brown/white Orange Blue/white Blue Orange/white Green Green/white

Orange/white Orange Green/white Blue Blue/white Green Brown/white Brown

Brown Brown/white Green Blue/white Blue Green/white Orange Orange/white

3.4 OPERATING SYSTEM3.4.1 Types of Operating Systems(i) DOS (Desktop Operating System) Table 8: Operating Systems DOS 1. It is a desktop operating system. 2. It is used in small networks. 3. In this OS, there is less security. 4. In this OS, all computers are clients. Win 3.1, Win 95, Win 98, Win ME comes. NOS 1. It is a network operating system. 2. It is used for large networks. 3. In this OS, there is more security. 4. In this OS, there are servers and 5. In this OS Win NT, Win 2000, Win 2003, LINUX, UNIX, Novell and MAC comes. (ii) NOS (Network Operating System)

5. In this OS, MS-DOS, GUI package clients.

3.4.1.1 Introduction to Window 2003 Server

Window server 2003 (also referred to as WIN 2k3) is a server operating system produced by Microsoft. Introduced in 24th April 2003 as the successor to window 2000 server, it is considered by Microsoft to be the corner stone of its window server system line of business server products. An update version Window Server 2003 R2 was released manufacturing on 6th dec, 2005. its successor window 2008 was released on 4th feb, 2008. According to Microsoft, window server 2003 is more scalable and deliver better performance than its predecessor window 2000. Features of Window 2003 (i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) A significant improved version of Internet Information Service (IIS) Increased default security over previous version due to the built in firewall and having most services disabled by default. Manage your server-a role management administrative tools that allow an administrator to choose what functionality the server should provide. Improvement to Active Directory. Improvement to Group Policy handling and Administration. Provides a Backup system to restore lost files. Improved disk management, including the ability to Backup from shadows of files, allowing the Backup of open files. Improved security and command line tools which are part of Microsoft initiative to bring a complete command shell to the next version of window. Support for a hard based Watch Dog Timer, which can restart the server if the operating system does not suspend with in a certain amount of time. Removed Features The ability of creating server disk automated system recovery (ASR) is used instead . Edition of Window 2003 Window server 2003 comes in a number of editions, each targeted towards a particular size and type of business. In general, all variant of window server 2003

have the ability to share files and printers, act as application server and host message queue, provide email services, authenticate users, act as an X.509 certificate server, provide LDAP (Light Weight Directory Access Protocol) services, serve streaming media, and to perform other server-oriented functions.

3.5

DNS SERVERDNS stands for domain name system. DNS system is a standard technology

for managing the names of websites and other internet domains. DNS techniques allows you to type names into your web browser like computer networking, about computer and allow your computer to automatically find that address on internet. DNS is the resolution mechanism used by Window Server 2003 clients to find other computers and services running on those computers for computers in a window 2003 network infrastructure to talk to one another, one of the key ingredients is the DNS server .Host name alone do not communicate globally but communicate locally, but if domain name is added along with it then the host name can communicate globally. DNS is use for name reservation i.e. to convert IP address to host name and host name to IP address or the function of DNS is to resolve host name such as www.yahoo.com to an IP address. User identify only user friendly name and all computers and technologies identify IP address and MAC address DNS is use to solve this problem because DNS is used to convert host name FQDN (fully qualified domain name) to IP address and IP address to host name .

3.5.1 PARTS OF DNS SYSTEM(i) (ii) Host name Domain name

(iii) (iv) (v)

FQDN Namespace DNS server

3.5.1.1 HOST NAME Host name is a computer name and is also called is NetBIOS (network basic Input/ output system) name. NetBIOS is actually an application layer protocol that can use the transport services of TCP/ IP when used in routed network. A NetBIOS name is 16- byte addresses that identify a NetBIOS resource on the network. 3.5.1.2 DOMAIN NAME Domain name is used to identifies the internet site one can identifies the location without having to remember the IP address of every location e.g. yahoo.com or gmail.com

3.5.1.3 FQD FQDN means fully qualified domain name which represents a hostname appended to the parent name space in hierarchy. Also in fully qualified domain name different levels of namespace are visualize as in fig below this hierarchy is visualized the root level namespace, top level domain, and so on, in use throughout the internet today. Left most portion of the FQDN is the host portion of the name. A host name is alias we give to an IP address.

Fig 6:To find location of a computer using FQDN FQDN is a unique name in the computer on the network. We can identify host id and location of a computer as in fig above. Suppose we want to find location of pc1 with IP address 20.0.0.1, which is in lab2, 2nd floor in the organization center. The FQDN for this is Pc1.row3.lab2.floor2.center.com But this address is very lengthy to locate pc1 so to simplify this we use c name technique as: Pc1.center.com=20.0.0.1 3.5.1.4 Domain Namespace DNS operates in what is known as DNS namespace. The DNS namespace is an organized, hierarchical division of DNS names. Domain namespace enable users to easily locate the network services and resources. The domain namespace include the root domain, the top level domain of the organization and organize these domain in a hierarchical tree structure. Namespace works on the hierarchical tree structure of root domain. There are total 13 root domain working in the internet, they are A, B, C, D, E, F, G, H, I, J, K, L and M. There is one root domain, which acts as the starting point of the

fully qualified domain names. This root domain is designated with a dot (.). Fig 6.2 shows the tree structure or domain namespace.

Fig 7: Tree structure or Domain Namespace 3.5.1.5 DNS server Any computer providing domain namespace is a DNS server. DNS server is used to convert host name FQDN into IP address and IP address into host name FQDN. To store the name-to-IP-addresses mappings so crucial to network communication, name server uses zone files.

3.5.2 DNS ZoneZone is the part of DNS database that contain record of domain or multiple domain. If the domains represents logical division of the DNS namespace, zones represents the physical separation of the DNS namespace. In other words information about records of the resources within DNS domain is stored in a zone files, and this zone files exist on hard drive of server. Zone files are divided into one of two basic types: Forward lookup zone: Provides host-name-to-IP-address resolution Reverse lookup zone: Provides IP-address-to-host-name resolution

3.5.2.1

Resource record stored in a zone file

Each record stored in a zone file has a specific purpose. Some of the records set the behavior of the name server, others have the job of resolving a host name or service into an IP table. (i) NS (Name Server): These specify the name servers that are authoritative for a given portion of DNS namespace. These records are essential when DNS servers are performing iterative queries to perform name resolution. (ii) SOA (Start of Authority): This resource record indicates the name of origin for the zone contains the name of the server that is the primary source for information about the zone. The information in an SOA record affect how often transfer of the zone are done between servers authoritative for the zone. It is also used to store other properties such as version information and timings that affect zone renewal or expiration. (iii) CNAME (Canonical Name):

CNAME can be used to assign multiple names of a single IP address.

For example, the server hosting the site www.abc.com is probably not named www, but a CNAME record exist resolution of www to an IP address all the same. The CNAME record actually points not to an IP address, but to an existing A record in the zone. 3.5.2.2 Steps to Install and configure DNS server Start control panel add and remove program Add remove window components Select networking services and click on detail button Check box of DNS server Ok and finish

3.5.2.3 Creating a Forward Lookup Zone Statically fill the IP address Start administrator tools DNS right click on forward lookup zone New zone next Select primary zone next Enter zone name (abc.com) next Tick Allow both secure and non secure updates and secure dynamic updated next next now click on created zone (abc.com) new host enter host name for global level (i.e by entering www) fill IP address of the web server , click on add button enter another host name, a blank host with same IP i.e do not fill its host name

steps to change SOA and NS records Right click on SOA records properties Fill primary server e.g (www.abc.com) responsible person

host master.abc.com apply ok right click on NS records click on add button enter FQDN www.abc.com resolve ok apply ok ping abc.com

Now go to start menu e.g ping www.abc.com

On Client Side To access DNS server fill IP address of server then use ping command

3.5.2.3

Creating a Reverse Lookup Zone Right click on reverse lookup zone New zone next select primary zone next fill Network ID next next Select allow both non secure and non secure dynamic updates Finish Right click on created reverse zone new pointer enter host IP number e.g (50.0.0.50) enter FQDN (www.chd.com)

3.5.2.4 Some DNS Commands

(i) c:>tracert www.yahoo.comcommand is used to check the path , a data packet follow from one router to another router. (ii) c:>nslookup command display the domain name with IP (works only when reverse lookup zone is set up). (iv) c:>ipconfig /all This command display FQDN, IP address, MAC address. (iv) c:>ipconfig /flushdns

This command flush or clear all the information in the cache that is retrieved from DNS server. (v) c:>ipconfig /displaydns Display the current contents or entries in the cache. (vi) c:>ip config /register register any DNS name

3.6 DHCP SERVERDHCP (Dynamic Host Configuration Protocol) is a protocol that allocates IP address to computer on a network. DHCP centralized the management of IP address allocation and reduces human error associated with manual IP configuration. DHCP server supplies all the necessary networking param-eters. Two things are always handed out as a part of DHCP configuration: IP address and subnet mask. Further DHCP will frequently configure clients with optional values, such as a default gateway, DNS server address, and the address of a Window Internet Naming Server, if one is present. Scenario showing DHCP server IP address allocation.

3.6.1 Working of DHCP Server(i) (ii) (iii) (iv) (v) DHCP Scope DHCP Super Scope Exclusion IP Range DHCP Lease Time IP Reservation Scope having the range of IP address for providing dynamic IP address to other computer. A group of IP address within a scope is called as DHCP scope. DHCP Super Scope A super scope is used to combine two or more scopes each serving different subnets, and can make the administration of several scopes on window 2003 DHCP server more manageable. Using super scope you can group multiple scopes as a single administrative

DHCP Scope

entity that allows the client to lease from either one. With this feature, a DHCP server can: Support DHCP clients on a single physical network segment where multiple logical IP networks are used. When more than one logical IP network is used on each physical subnet or network, such configuration is called multinets. Support DHCP clients located on the far side of DHCP and BOOTP relay agent. In multinet configuration, DHCP superscope can be used to group and activate individual scope ranges of IP addresses used on your network. In this way , a DHCP server computer can activate and provide leases from more than one scope to clients on a single physical network. Exclusion IP range If you want to reserve some IP for any computer i.e if we want that from the series of 192.168.0.2 to 192.168.0.100 if we want that a series of IP addresses must not be assigned automatically then at can be done using exclusive IP range. DHCP Leased Time DHCP lease time is validity of IP address. By default DHCP lease time is 8 days minimum,1 day maximum 999 days, 23 hours to53 day. With in 8 days:After 80% of day clients demand new IP some times server refuse the client request. After 87.5% of days it will retry, and if the server did not give the new IP address then the client will receive APIPA address (Automatic Private IP Address). When a DHCP client is unable to locate a DHCP server, the client picks out a random IP address from the private APIPA address range of 169.254.*.*, with a subnet mask of 255.255.0.0. The 169.254.*.* IP range is private because that network number is not in use on the internet, it is random because the client generates an arbitrary host number for that network. The significance of APIPA is that DHCP client computers that cannot find a DHCP server can still be assigned an IP address and communicate with other computers on the same subnet mask that also cannot find DHCP server. It allows communication

when DHCP server is down or just plain not there. Note that APIPA does not assign a default gateway, and therefore it cannot communicate with any computer that lives on the other side of a router. IP Reservation There are some DHCP clients that you want to be the DHCP clients, but you will also want to make sure that they get same IP address every time. This can be done by statically filling the IP address. We can reserve IP address with the help of MAC address for a particular computer.

3.6.2

Installation Steps of DHCP Serverstart control panel add and remove program add and remove window components select networking services and click on detail button check box of DHCP server ok finish

3.6.2.1

Steps To Configure DHCP Serverstart program administrative tool select DHCP create new scope in action menu new scope next give scope name next give IP address range next add exclusion name next check lease duration next finish

After DHCP server is configured, it is required to be authorized and DHCP scope should be active. For that select DHCP server and click on authorize in action menu. Then right click on scope name and click on active.

3.6.2.2

On Client SideGo to LAN card properties select TCP/IP protocol properties Select obtain IP address automatically Go to command prompt (cmd) Give command

3.6.2.3

Backup of DHCP Server

We can take backup of all the configuration in DHCP server with the help of administrator. Backup means to export the DHCP database to another system, as it is helpful in case due to any reason our data is corrupted or deleted, we can take our database from the place where it is stored. Steps of taking backup : Stop the DHCP server and disable the DHCP server services Copy the DHCP server directory to a temporary location, say pen drive or on a new DHCP server.

3.6.3 DHCP Relay AgentThe DHCP relay agent is a software that listen DHCP discover packet and forward to DHCP server. In window 2003 server system the DHCP relay agent can be enabled as a part of Routing and Remote Access (RRAS).

3.6.3.1 Steps To Configure DHCP Relay Agent Set the network, fill the IP address and select two LAN cards Open Routing and Remote Access enable Routing and Remote Access Right click on general new routing protocols Select DHCP relay agent New interface Select LAN card which is to be connected to the cross cable i.e L1 Ok

Right click on relay agent properties Enter IP address of DHCP server add apply ok

3.7

ACTIVE DIRECTORY

With the release of Windows 2000, Microsoft introduced Active Directory, a scalable, robust directory service. Active Directory is used to create server based networking. Active Directorys job is to store and make available a Directory database i.e information about the user, its class, name, address, mails, phone numbers, location. Active Directory is a technology created by Microsoft that provides a variety of network services like Directory Services, DNS based naming and other network information. Active Directory also allows administrator to assign policies, deploy software and apply critical updates to an organizations. Active Directory was previewed in 1999, released first with window 2000 server edition and revised to extend functionally and improve administration in Window 2003. Additional improvements were made in Window server 2003 and Window server 2008. The fundamental building block of Microsofts Directory services continues to be a domain. A domain is logically grouping of network resources, including shares, printers, groups and users accounts. The user account represents the individual to domain, and allows for different type of access and different types of tasks. Every users account is unique. It has uniqueness of the user account that allows administrator to control access for every member of domain. There are two types of users accounts: local account and domain account. Local accounts are maintained in the local database of a computer and cannot be used to grant access to network resources. Local users are primarily used to administer a computer or to allow several people to share a single computer that is not a member of a domain. Whereas domain users accounts are much more widely used in organizations that local user accounts because they allow for central administration and user can log onto any computer in the domain. Domain users accounts are stored in Active Directory.

3.7.1 Active Directory ServicesA computer network can be divided logically into two networking models. Workgroup Domain

Difference Between Workgroup and Domain Table 9 Workgroup Domain

1. It is a peer-to-peer networking 1. It is a server based networking model. model. 2.there is a centralized dedicated server 2. There is no client and no server. computer All computers are in equal status. 3.This model is recommended for small networks (upto 10 pcs). 4. There is no centralized Administration and each PC is 4. There is centralized administration and each PC can be administrated and managed from the server. 5.In this model, low grade operating system like 2000/xp professional, 5.In this model high grade operating win 98 etc can be used. 6. Workgroup can be given names like sales, HR, accounts etc. 6. Domain can also given names like abc.com, xyz.com etc. system ,like win2000/2003 server are used. administrated separately. 3. This model is recommended for large networks. called domain controller (DC)which controls all other computers called clients.

7 Users accounts are created in each PC and are called as Local Users. 7.Users accounts are created on sever side DC and are called as Domain Users. Active Directory uses domain to hold objects, each domain has security boundary. Users must authenticates to the domain in which their users account resides before they can access resources, such as a shared folders. Active Directory also links related domains in a hierarchical structure and users can access resources in any of the domain in which their user account resides. The hierarchical structures of related domain is called a tree, and all domains in the tree share the same Domain Name System (DNS) namespace. All the domains and the trees in a single organization are called a forest. All domains in the forest share same schema.

3.7.1.1

Types of Domain

Domain Forest Domain Tree Organization unit

Domain Forest A forest is created when window 2k3 server computer is configured as a domain controller. A forest is a collection of multiple domain link together and relationship between the domains. Domain Tree A domain tree is made up when there is a parent child relationship between the domain in the forest. The child domain includes the complete parent domain name. a tree is a set of two or more domains sharing common namespace e.g we can create a parent domain and then child domain like mail.yahoo.com; where mail- child domain, yahoo- parent domain.

Fig 8: Structure of domain forest and domain tree Organization Unit (OU) Organization unit is the smallest unit in a domain network that can contain users, computer groups, shared folders, printers and group policy object in simple words. OU means department like sale department, accounts department like sales, accounts in a company OU can be used to apply different security policies to computer and users in different department. OU also helps in dividing administration among different administrator of managing only computer and users of sales department.

3.7.1.2

Types of Domain Controller(i) (ii) (iii) PDC : Primary domain controller ADC : Additional domain controller BDC : Backup domain controller

Primary Domain Controller (PDC) This is the first domain controller, in this domain all entries are created in it like users account, group policy, Organization unit etc. All FSMO role are done in PDC.

Additional Domain Controller (ADC) It is a domain network, it is important to have more than one DC so that if one DC fails, the other DC will continue serving the client. There is also load balancing of Active Directory Service if we have more than one DC. The first DC we create is simply called PDC and if we create an extra DC then that DC is known as ADC. ADC has same configuration of AD as primary domain controller. All domain controllers in a domain networking are masters. We can make a change in the active directory of any domain controller and that change is replicated to all other domain controllers. Replication takes place among all the domain controllers and it is controlled automatically. If we create a user in the first domain controller, it is automatically created in the ADC because of replication. All the domain controllers in the domain networking are peers and this model is called as multi- master model .

Fig 9: Multi-Master Model

3.7.1.3 Requirements of Active Directory(i) (ii) Window 2000/2003 server computer. Atleast one NTFS partition.

(iii) (iv) (v) (vi)

Static IP address Atleast 1GB free hard disk space LAN card enabled and connected to the network Install DNS, if not installed of Active Directory and configure it.

It should be noted that active directory cannot work without DNS.DNS is automatically installed and configured during the Active Directory installation.

3.7.1.4 Installation of Active DirectoryFirst of all fill the static IP address, then install DNS service into it and after that install the Active Directory start run dcpromo Ok Welcome to active directory next next Select domain controller for a new domain e.g (gmail.com) Next Domain NETBIOS name (gmail.com) Next Data folder, folder new tech directory service next (SYS VOL) Next Click on install and configure the DNS server on this computer to use this DNS server as its preferred DNS server. Tick on permission compatible only with window server Next Enter the restore mode and the password next next finish now restart computer

Command used for the removal of Active Directory

start run dcpromo This command is also used to remove active directory, if after this command the active directory is not removed then type startrun cmddcpromo /forceremoval Ok

How to identify Active Directory installation Start administrator tool After that if three options specified if come, it means that Active Directory has been installed Active Directory domain and trusts Active Directory sites and services Active Directory users and computer Open DNS console by Administrator toolsDNS Forward lookup zone msdcs.exam.edu start of authority (SOA) name server (NS) Now ping active directory with domain name like start run ping gmail.com

Backup of Active DirectorActive Directory backup come in use when there is some problem in active directory. If there is any problem in active directory then remove it and restore the backup. Start runntbackupok Select advance mode and untick that is already ticked Select backup

Selsct system state Change backup path browse keep in your hardware and then send it to the pen drive D:\adbackup

3.7.2 CHILD DOMAINA domain is created say xyz.com. this domain is known as parent domain or the root domain. Now chd.xyz.com will be the child domain or the sub domain of xyz.com.

Fig 10 : parent-child relationship model A child domain is created to ease administration in a very large domain network. We can create the parent domain in the head office of the company and the child domain in the branch offices. Each branch office will have its own administrator to manage the users of the child domain present in the branch office. A true relationship is automatically created between the parent domain and the child domain. This means users in the child domain can access the file server of the

parent domain. Moreover users of either domain can use clients of either domain for logging in the domain but a user can always logon only in the domain in which his account resides, though he physically can use client pc of parent or client domain. Users of either domain can logon its own domain from either side but only when it use its own domain name. users of parent domain can communicate with child domain but he has to use its domain name for that.

3.7.2.1

Steps to create child domain

First of all install the active directory on pc1 i.e on the parent domain. Now make Tom user on it. On pc2 create the child domain, then make users on it, user- Ram Below are the steps to cerate child domain. Fill the IP address in the child domain Now ping to the parent domain with the domain name (xyz.com) Run dcpromo ok next select domain controller for a new domain next select child domain and existing domain name (mcse.com) next enter username, password and domain name enter user parent domain name also enter child domain name enter complete DNS name i.e xyz.mcse.com next next next next

it should be noted that parent domain can logon into child domain but on the other hand child domain cannot logon to the parent domain. Also parent domain can apply policies or security on the child domain. Make the client member by entering particular user with its domain name. First right click on My Computer Properties Computer name Change Write domain name ok Now logoff start and then write user name - Tom Domain name - mcse.com Again logoff and check the other user Start-user name- abc Domain name mail.mcse.com

3.8

INTERNET SHAREINGWe can share a single internet connection to multiple computers with the help of

networking or internet sharing. There are four ways to share internet. (i) (ii) (iii) (iv) Direct sharing ICS Internet connection sharing Win Proxy NAT Network Address Translation

3.8.1 Direct SharingInternet sharing can be done between computers directly, just by taking internet connection directly from ISP (Internet Server provider), then it is provided to ADSL model, ADSL modem is connected to the ISP through RJ-11 connector. Then it is

connected to the switch with RJ-45 connector. Switch, further connects computers those have to be provided with internet connection. The scenario for direct sharing is as shown in figure:

Fig: 11: Direct Sharing Scenario ADSL modem has IP address 192.168.1.1. All the PCs are assigned with a DNS (Domain Name Server) and GW (gateway) -192.168.1.1. Also DHCP (Dynamic Host Communication Protocol) is enabled which will provide IP addresses to the PCs automatically.

3.8.2 ICS (Internet Connection Sharing)Internet Connection sharing provides an alternate way to provide Internet Sharing. ICS requires a server with two network interfaces, one for the private internal network configured with IP 192.168.0.1 address and an adapter for public connection. ICS requires two connections in order to work: one public and one private i.e. ICS server

requires two LAN cards, Internal (Private) and External (Public). Internal LAN card uses Local LAN card (L2) and External LAN card (L1) is used by Internet. ICS is designed to be as simple as possible. ICS works on following windows: XP, Vista, 2K3 Server, 2k3 Server SP1.it doesnt work on the server in which AD+SP1 is present. The scenario for ICS is shown below:

Fig 12: ICS scenario Note:- When we configure ICS then the local card detect 192.168.0.1 address automatically.

How to configure ICS Open network and sharing center Network- Properties Click on Manage network connections Right click on LAN Card which is used for internet- Properties Click on sharing Enable ICS Ok yes

3.8.3 Win Proxy ServerWin Proxy is a third party software which is used for sharing internet and we can also block the web site with the help of win proxy. WIN Proxy supports all the three classes A, B, C also it is supported by all operating systems. The scenario for WIN proxy is shown below:

Fig 13: scenario of win proxy server In win proxy as shown in the scenario above we can share internet. First of all a ADSL modem is connected to the ISP (Internet Service Provider) by a RJ-11 connector and other end of ADSL modem is connected to the PC1 through RJ-45. Assign IP address 192.168.1.1 to the ADSL modem also enable the DHCP server and set the start IP address of 192.168.1.2 and end IP address of 192.168.1.254. Then after ADSL modem connect PC1, assign GW 192.168.1.1 and

3.8.4 NAT (Network Address Translation)If we have to connect many computers with a single IP address then we will use NAT. NAT exchange IP packet between local network and internet. The routing and remote access server of window 2K3 server provide us with a component known as NAT. By enabling NAT on a Server 2003 system, you allow connected users on a private system to

share a single connection to access a public network such as the internet i.e. NAT enable multiple client computer to connect the internet through a single publicly registered IP address. A NAT server translate private IP address to public addresses. NAT eliminates the need for large number of IP addresses by mapping externally assigned IP addresses.

Fig 14: NAT server When deploying NAT, it is needed to configure setting on both the client side and the server side. On the server side of NAT fill the IP address statically.

3.8.4.1 Steps to enable NAT server Open internet Tools Internet options connections LAN settings untick the IP and port address ok ok give site name

.

On the client side of NAT, client side is configured to obtain IP addresses

automatically and then restart the client system. Assuming NAT is used for address assignment, the client system will receive TCP/IP information from the NAT server. The client information includes: IP address from 192.168.0.0 private addressing range

Subnet mask (255.255.255.0) DNS server address, which would be the address of the NAT interface on the server.

With the client side configured, there are few things to do on NAT server: The first step to configure NAT server is to actually install the Routing and Remote Access Services. To do this, start the Routing and Remote Access Service Setup Wizard. Start administrator tools Routing & Remote Access Right click on My Computer right click on computer name Select option Configure and enable routing & remote access Welcome to routing next next Select NAT next Select LAN card which is to be connected to internet next next

From any of the four methods of internet sharing only method is used at a time to remove the other method go to start setting add & remove change/ remove, tick on remove.

3.9 VIRTUAL PRIVATE NETWORK (VPN)A virtual private network is used to convert public network address to private network. All the clients of VPN dial to public IP address of VPN server and receive private IP from virtual VPN dynamic host protocol (DHCP).in VPN one can have multiple virtual connections to a single IP address. This way ,one network card can host several inbound connections, rather than require a modem and telephone line for each simultaneous remote user.

Fig 15 : scenario of VPN server Using VPN server we can connect many private networks to internet services i.e the remote connection. We can create a private network through public network, we can use firewall for security and data encryption in VPN server.

3.9.1 VPN components(i) (ii) (iii) (iv) VPN Server VPN server, serve as the end points of a VPN connection. When configuring a VPN server, you can allow access to just that server, or pass traffic through VPN server so that the remote user gain access the resources of the entire network. VPN Client VPN clients establish connection to VPN server. They can also be routers that obtain the router-to-router secure connection. VPN client software is included in all the modern window operating systems, including Window 2003 server. Router-to router VPN connection can be made from computers running server2003 and Windows 2000 VPN server VPN Clients WAN Option Security Options

running Routing and Remote Access. Additionally, any client that support PPTP or L2TP connections can be VPN clients of a window server 2003 system. WAN Options These provide the physical mechanism for passing data back and forth. These connections typically include such similar network technologies such as T1or frame relay. In order for VPN connections to be successful, the VPN client and VPN server must be connected to each other using either permanent WAN connection or by dialing into an internet server provider (ISP). Security Options Since a VPN uses a network that is generally open to the public, it is important that the data passed over the connection remain secure. To aid with secure communication routing and remote access supports such security measure as logon and domain security, data encryption, smart cards, IP packet filtering and caller ID.

3.9.2 Types of VPN(i) (ii) PPTP (Point to Point Tunneling Protocol ) L2TP (Layer 2 Tunneling Protocol) according to CCNA.

Point to Point Tunneling Protocol (PPTP) PPTP is Microsofts legacy protocol for supporting VPN. It was developed in conjunction with other communications companies such as Robotics as an extension to the PPP protocol. PPTP encapsulates IP or IPX packets inside of PPP datagrams. This means that you can remotely run programs that are dependent upon particular network protocols. One of the keys to remember about PPTP is that the protocol provides encryption capabilities, making it much safer to send information over nonsecure networks. Layer Two Tunneling Protocol (L2TP) L2TP is a standard based encapsulation protocol with roughly the same functionality as a Point-to-Point Tunneling Protocol (PPTP). One of the key differences

between Windows server 2003 implementation of L2TPand it cousin PPTP is that L2TPis designed to run natively over IP networks only. This implementation of L2TP does not support native tunneling over X.25, frame relay, or ATM networks. Like PPTP, L2TPencapsulates Point-to-Point Protocol (PPP) frames, which then encapsulate IP or IPX protocols, allowing users to remotely run programs that are dependent on specific network protocols . But unlike the PPTP protocol, L2TP does not provide encryption of the data. For data security L2TPrelies on the services of another standards- based protocol, IPSec.

3.9.3

How to configure VPNstartadministrative tools Routing and Remote access Right click on computer name configure and enable Routing and Remote access next select remote access (dial up or VPN) next VPN next select LAN card which is connected to internet (172.15.15.50) public IP disable enable security next from a specific range of address nextnew enter the required range oknext no radius next finish

3.9.4 3.9.5

Create users in VPN serveropen user properties dial in allow access apply ok

Working on Client SideRight click on My Network Places properties Double click on New Network Wizard next

Connect to network at my work place next Virtual private network connection next Enter company name (abc) next Enter public IP address of VPN server next Any one use next finish

3.10

ROUTINGIt is a process of transferring information through an inter network i.e from one

network to another. Routing connect different networks having ID help in process of routing. The dial-in properties also allow for specific IP address to be assigned to a user. This is the only way in Window Server 2003 that you can assign a specific IP to a user. To assign a specific IP to a user, check the box next to assign A Static IP Address and enter a valid IP in the space provided. Static routing can also be specified as per user. By defining static routes, users can be limited to only specific parts of networks. In an internetwork a router must then about all the networks present in the for effort websites, there are hardware routers like CISCO. Even win 2003 server computer configured as router. In simple words Router is a computer with two network cards. These two network cards, then, are attached to two different logical IP networks. The routing table helps direct traffic that is passed through the router. Now when there is a router, also there is a routing table, there is a need to configure the router in order for that router to pass along traffic to the proper network. There are two ways the routing table can be built and modified: either manually or automatically.

3.10.1 Types of Routing(i) (ii) Static Routing Dynamic Routing

3.10.1.1 Static RoutingIn this routing information required for routing is manually entered into the router by administrator.

How to configure LAN routing Enter the static IP in the router Administrator tools Routing and Remote access Right click on computer name (pcc1) Configure and enable routing and remote access next custom configuration select LAN routingnext finish yes and logon to see IP table route

Enable LAN routing Interface WAN IP 172.15.0.0 SNM 255.255.0.0 GW 20.0.0.2

enable LAN routing Interface WAN 10.0.0.0 IP 10.0.0.0 SNM 255.0.0.0 GW 20.0.0.1 Fig 16 : scenario for LAN routing

How to configure static routing

At Router R1: At Router R2: Enable LAN routing Right click on static route Interface WAN Destination 10.0.0.0 Mask 255.0.0.0 GW 20.0.0.1 enable LAN routing right click on static route interface WAN destination 172.15.0.0 mask 255.255.0.0 GW 20.0.0.2

Fig 17 : static routing

3.10.1.2 Dynamic Routing

The other way to manage a router routing tables is to let the computer do it for you. Just like DHCP allocate IP addresses, configuring the dynamic routing protocol usually means less errors due to human error, and less administrative overhead. In dynamic routing, routing information is automatically entered in the router using protocols like RIP AND OSPF. These routing protocols used by Window Server 2003 use one of two kinds of algorithms to determine the best possible path for a packet to get to its destination, either distance vector or link state. RIP is used for small networks where as OSPF is used for large networks.

Routing Information Protocol (RIP)The distance vector protocol in use on Window 2003 is called Routing Information Protocol (RIP) for IP. This protocol was designed for the exchange of the routing information within a small to medium size IP network. When Router is enabled on Window 2003 machine, the routing table includes entries only for the networks that are physically connected. When RIP is enabled for an interface, the router will periodically send an announcement of its routing table to inform other RIP routers of the networks it can reach. RIP version1 uses broadcast packets for its announcement. RIP version2 offers an improvement and can be configured to use either multicast or broadcast packets when communicating with other routers. Also, RIP version2 offers more flexibility in subnetted and classless inter domain routing (CIDR) environments. The biggest advantage of RIPis its simplicity. With a few clicks in the Routing and Remote Access Server and MMC console, you can deploy RIP. With the RIP dynamic routing protocol installed on Windows Server 2003, you get the following features: (i) (ii) RIP version1 and version2, with the ability to configure individual network cards with separate versions. Calculations used to avoid routing loops and speed recovery of the network whenever topology changes occur.

(iii)

Route filters; you can configure RIP to except information from only certain networks, and also choose which routes will be shared with RIP routers.

(iv) (v)

Peer filters, which allow control over which router announcements are accepted. Simple password authentication support.

But there are significant drawbacks, which makes RIP a poor, if not unusable solution for large networks. For example, the maximum hop count used for RIP routers is15, making network 16 hops away (or more) unreachable where RIP is concerned. Open Shortest Path First (OSPF) Where RIP is built to work to work in smaller networks, the Open Shortest Path First (OSPF) routing protocol is designed for large or very large networks. The goal is the same: information about connection to other networks is shared from one router to another. It offers several advantages over RIP, especially significant in large networks: (i) (ii) (iii) Routes calculated with OSPF are always loop free. OSPF can scale much more easily than RIP. Reconfiguration for network topology changes is faster.

The biggest reason OSPF is the choice in large networks is its efficiency; instead of changing routing table via broadcast the way RIP does, OSPF configured routers maintain a map of the network. The mapping is called the link state database, OSPF routers keep the link state database up to date. Once changes have been made to link state database, an OSPF routers link state database is recalculated. As the networks start to multiply, the size of the link state database increases, and a corresponding hit on router performance results. To combat this, OSPF sub divide the network into smaller sections, called areas. Areas are connected to each other through a backbone area, with each router only responsible for the link state database for those areas connected to the routers. Area Border Routers (ABRs) then connect one backbone area to another.

The biggest drawback of OSPF is its complexity; OSPF requires proper planning and is more difficult to configure and administer.

3.11 EXCHANGE SERVERExchange server is a mail server, we can send and receive mail from one user to another user. Exchange server is the mail server of Microsoft.

3.11.1 Elements of Exchange ServerMail Server A server which helps to the users to send and receive mail is called mail server. Mail Box A storage place where senders and receivers mails are stored.

3.11.2

Exchange VersionTable 10: Exchange Server with different operating systems Exchange Version Exchange Server 5.5 Exchange Server 2000 Operating System WIN NT or 2000 server (without SP). WIN NT or 2000 server (SP3,SP4) without (SP). Exchange Server 2003 WIN 2000 Server or WIN2003 server (SP4) without SP. Exchange server 2007 WIN2003 server or R2/WIN 2008 server with SP1.

Where SP stands for Service Pack. Service Pack are the services which are loaded externally to remove some bugs that come during installation of server CD.

3.11.3 Requirements for Exchange Server Protocols Required POP3 (Post Office Protocol) This protocol is used for receiving e- mails. IMAE4 (Internet Messaging Access Protocol) This protocol is advance version of POP, this is also used to receive mail. LMTP (Local Mail Transfer Protocol)/SMTP (Simple Mail Transfer Protocol) This protocol is used to send mails. NNTP (Network News Transfer protocol) This protocol is used for transferring messages on internet.

Hardware Requirements Processor: min. 133MHz Rec. 733MHz RAM: min. 256MB Rec. 512MB

Other Requirements OS: 2k or 2k3 Server NTFS partition Static IP address Active Directory DNS installation with AD zone IIS installed with ASP.net, SMTP, NNTP and www service

3.12 Open System Interconnection (OSI) ModelOSI model is the layer approach to design, develop and implement network. OSI provides following advantages: (i) (ii) Development of new technology will be faster. Devices from multiple vendors can communicate with each other.

(iii)

Implementation and troubleshooting of network will be easy.

3.12.1 Description of Different LayersApplication Layer Application layer accepts data and forward into the protocol stack. It creates user interface between application software and protocol stack. Presentation Layer This layer decides presentation format of the data. It also able to performs other function like compression/decompression and encryption/decryption. Session Layer This layer initiate, maintain and terminate sessions between different applications. Due to this layer multiple application software can be executed at the same time. Transport Layer Transport layer is responsible for connection oriented and connection less communication. Transport layer also performs other functions like (i) (ii) Error checking Flow Control Buffering Windowing Multiplexing (iii) (iv) (v) (vi) Network Layer This layer performs function like logical addressing and path determination. Each networking device has a physical address that is MAC address. But logical addressing is easier to communicate on large size network. Logical addressing defines network address and host address. This type of addressing is used to simplify implementation of large network. Some Sequencing Positive Acknowledgement Response

examples of logical addressing are: - IP addresses, IPX addresses etc. Network layer has different routing protocols like RIP, EIGRP, BGP, and ARP etc. to perform the path determination for different routing protocol. Network layer also perform other responsibilities like defining quality of service, fragmentation and protocol identification. Data Link Layer The functions of Data Link layer are divided into two sub layers (i) Logical Link Control Media Access Control Logical Link Control defines the encapsulation that will be used by the NIC to delivered data to destination. Some examples of Logical Link Control are ARPA (Ethernet), 802.11 wi-fi. (ii) Media Access Control defines methods to access the shared media and establish the identity with the help of MAC address. Some examples of Media Access Control are CSMA/CD, Token Passing. Physical Layer Physical Layer is responsible to communicate bits over the media this layer deals with the standard defined for media and signals. This layer may also perform modulation and demodulation as required.

3.13 ROUTERS

13.13.1 Router Architecture and its Key Component

Processor I/O Controller Memory Controller BIOS ROM Incomplete IOS NVRAM Startup Configuration RAM

LAN WAN Ports

Flash RAM O/S IOS

Fig 18 : Architecture of router Processor Speed: - 20 MHz to 1GHz Architecture: - RISC Reduce Instruction set computer Manufacturers: - Motorola, IBM, Power PC, Texas, Orion, Intel. Flash RAM Flash memory is just like a hard copy of the computer. Flash RAM is the permanent read/write memory. This memory is used to store one or more copies of router O/S. Router O/S is also called IOS (Internetwork Operating System).The size of Flash RAM in the router is 4MB to 256MB. This memory is Electrically Erasable Programmable Read Only Memory (EEPROM). NVRAM NVRAM is a Non Volatile Random Access Memory. It is used to store the startup configuration of the Router. It is on chip RAM, its size is 32kb.

RAM (Random Access Memory) It is a volatile memory. All the activities we do are stored in RAM,this means that it holds the running configuration. RAM of the router is divided into two logical parts. Primary RAM Shared RAM

Primary RAMPrimary RAM is used for: (i) (ii) (iii) (iv) (v) Shared RAM Shared RAM is used as a buffer memory to shared the data received from different interfaces. Size of RAM in a router may vary from 2 MB to 512 MB. The types of memory that may be present in a RAM are: (i) (ii) (iii) DRAM -> Dynamic RAM EDORAM -> Extended Data Out RAM SDRAM -> Synchronous Dynamic RAM Running copy of IOS. Running configuration Routing table Address Resolution Protocol (ARP) table (IP address to MAC address) Processor & other data structure

ROM (Random Access Memory) It has four components: POST (Power on Self Test) It performs hardware testing. BOOT Strap Boot strap specifies from where and which inter operating system is to be loaded.

Mini IOS Cisco 2500, 1600 ROM MOW

333333

Router Interfaces & Ports

Interface is used to connect LAN networks or wan networks to the router. Interface will use protocol stacks to send/receive data. Ports are used for the configuration of routers. Ports are not used to connect different networks. The primary purpose of port is the management of router. 33333333 Router Interface

Table 11: Router interfaces and connectors

AUI Attachment Unit Interface EPABX Electronic Private Automatic Branch PSTN Public Services Telephone Network 3.13.2.2 Router Ports Table 12: Router Ports

333333

Modes of Router

When we access router command prompt the router will display different modes. According to the modes, privileges and rights are assigned to the user.

User modeRouter> In this mode, we can display basic parameter and status of the router we can test connectivity and perform telnet to other devices. In this mode we are not able to change and save router configuration.

Privileged modeRouter# In this mode, we can display all information, configuration, perform administration task, debugging, testing and connectivity with other devices. We are not able to perform here configuration editing of the router. The command to enter in this mode is enable. We have to enter enable password or enable secret password to enter in this mode. Enable secret has more priority

than enable password. If both passwords are configured then only enable secret will work.

Global configurationRoute(config)# This mode is used for the configuration of global parameters in the router. Global parameters applied to the entire router. All the changes are performed in this mode. But here we cannot see and save the changes. For e.g: - router hostname or access list of router, password, Banner, Routing, Security. The command to enter in this mode is configure terminal

Line configuration modeIn this mode we can set the password of the user mode, i.e to set user mode password .This mode is used to configure lines like console, vty and auxiliary. There are main types of line that are configured. (i) Console Router(config)#line console 0 (ii) Auxiliary Router(config)#line aux 0 (iii) Telnet or vty Router(config)#line vty 0 4

Interface configuration modeIn this mode we can set ip addresses of the interfaces. This mode is used to configure router interfaces. For e.g:- Ethernet, Serial, BRI etc. Router(config)#interface Router(config)#interface serial 1

Routing configuration modeThis mode is used to configure routing protocol like RIP, EIGRP, OSPF etc. Router(config)#router []

Router(config)#router rip Router(config)#router eigrp 10

333333

Configuring Password

There are five types of password available in a router

Console Passwordrouter#configure terminal router(config)#line console 0 router(config-line)#password router(config-line)#login router(config-line)#exit To erase password do all steps with no command.

Vty Passwordrouter>enable router#configure terminal router(config)#line vty 0 4 router(config-line)#password router(config-line)#login router(config-line)#exit

Auxiliary Passwordrouter#configure terminal router(config)#line Aux 0 router(config-line)#password router(config-line)#login router(config-line)#exit

Enable Passwordrouter>enable router#configure terminal

router(config)#enable password router(config)#exit

Enable Secret PasswordEnable Password is the clear text password. It is stored as clear text in configuration where as enable secret password is the encrypted password. Router>enable Router#configure terminal Router(config)#enable secret Router(config)#exit

Encryption all passwordsAll passwords other than enable secret password are clear text password. The command to encrypt all password are Router#configure terminal Router(config)#service password-encryption

3.13.5 Managing ConfigurationThere are two types of configuration present in a router (i) (ii) Startup Configuration Running Configuration

Startup configuration is stored in the NVRAM. Startup configuration is used to save settings in a router. Startup configuration is loaded at the time of booting in to the Primary RAM. Running Configuration is present in the Primary RAM wherever we run a command for configuration, this command is written in the running configuration.

To save configurationRouter#copy running-configuration startup-configuration Or Router#write

To abort configurationRouter#copy startup-configuration running-configuration

To display running-configurationRouter#show running-configuration

To display startup configurationRouter#show startup-configuration

Configuring Host NameRouter#configure terminal Router(config)#hostname #exit or end or /\z Router#config terminal Router(config)#hostname r1 R1(config)#

Configuration InterfacesInterfaces configuration is one of the most important part of the router configuration. By default, all interfaces of Cisco router are in disabled mode. We have to use different commands as our requirement to enable and configure the interface. Router#configure terminal Router(config)#interface Router(config-if)#ip address Router(config-if)#no shutdown Router(config-if)#exit

To display interface statusRouter#show interfaces (to show all interfaces) Router#show interface This command will display following parameters about an interface (1) Status

(2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)

Mac address IP address Subnet mask Hardware type / manufacturer Bandwidth Reliability Delay Load ( Tx load Rx load) Encapsulation ARP type (if applicable) Keep alive

Configuring optional parameter on WAN interfaceRouter#configure terminal Router(config)#interfac Router(config-if)#encapsulation Router(config-if)#clock rate Router(config-if)#end

Command displaying history of Router To display commands present in historyRouter#show history

To display history sizeRouter#show terminal

To change history sizeRouter#config terminal Router(config)#line console 0 Router(config-if)#history size Router(config-if)#exit

Configuring BannersBanners are just a message that can appear at different prompts according to the type. Different banners are: Message of the day (motd) This banner appear at every access method Login Appear before login prompt Exec Appear after we enter to the execution mode Incoming Appear for incoming connections

Syntax:Router#config terminal Router(config)#banner Router(config)# Text Massage

ExampleRouter#config terminal Router(config)#banner motd $ This router is distribution 3600 router connected to Reliance $ Router(config)#

To set time in routerWe can configure router clock with the help of two methods: (i) (ii) default on reboot. Configure clock locally Configure clock on NTP server (Network Time Protocol)

Router does not have battery to save the clock setting. So that clock will reset to the

To display clockRouter#show clock

To configure clockRouter#clock set hh:mm:ss day month year Router#clock set 7:15:10 9 June 2009

To configure clock from NTP serverRouter#config terminal Router(config)#ntp server Router(config)#exit C:\>ping pool.ntp.org To get ntp server ip from internet C:\>route print

3.14

SUBNETTINGSubnetting is a process or a technique to divide large and complex networks into

smaller parts or smaller networks and each network is called as subnet. Subnetting is done to reduce the wastage of IP addresses ie instead of having a single huge network for an organization smaller networks are created within a given huge network. Subnetting allows the user to create multiple logical networks within a single Class A, B or C based networks. In subnetting, the IPv4 address is broken into two parts; network id and host id. This process borrows bits from the host id field. In this process, the network size does not shrink but the size of hosts per network shrinks in order to include sub-networks within the network. 3 33333

Advantages of subnetting

Size of the physical networks is reduced and hence easy to manage. Reduce network traffic. Easy to troubleshoot.

Reduce the wastage of IP address.

Subnet MaskA subnet mask specifies the part of IP address that is to be used for identifying a sub network. A subnet mask when logically ANDed with IPaddress provides a 32- bit network address. This binary address gives the first address in the subnet block specified in the large network.

Default MaskClassfull addresses consists of three classes; Class A, Class B, Class C used for subnet.Each class has a default subnet mask C lass A consists of eight 1s in the network address field and 24 0s in remaining field, Class B consists of 16 1s in network address field and 16 0s in remaining field, and Class C cointains 24 1s in the network address field and remaining 8 bytes as 0s. the default address mask in binary and dotted-decimal is shown in the table

To Calculate the Subnet Mask 1. Identify the class of address assigned. For this example the class of IP address is Class B.

2. check the default address mask for the appropriate class and convert it to binary format .for this example the default address mask is 255.255.0.0 and the equivalent binary format is; 11111111.11111111.00000000.00000000 3. check the no. of 1s in the default mask. E.g this address contains 16 1s in class B, 16 bits 2 octat are for net id and the last 16 bits 2 octates are for host id. 4. now if we need 9 subnets. This no. 9 is not a power of 2. the next no. that is power of 2 and greater than 2 is 16. So, we require 4 extra 4 extra 1s in the network field which has to be borrowed from the host id field. 5. the total no. of 1s is 16+4=20, as 16 1s are from network id and 4 1s are of additional bits required for subnetwork. The no. of 0s in the n/w is 32-20=12. which defines whole address. 6. hence address is given as 11111111.11111111.11110000.00000000 and in decimal format can be given as 255.255.240.0 Table 14: decimal and binary values of subnet mask

Decimal Binary

00000000 0 128 192 224 240 248 252 254 255 10000000 11000000 11100000 11110000 11111000 11111100 11111110 11111111

3 33333

Types of Subnetting

Fixed Length Subnet Mask (FLSM) Variable Length Subnet Mask (VLSM)

Steps of Subnetting for FLSMFor IP address 192.168.10.0 (Class C) Step 1: Identify the total no. of subnets 2^n = no.of subnets Where n are the no.s and borrowed bytes from host ID portion. Let we are given that we have to make 4 subnets. Therefore 2^n =4 i.e n=2 Step 2: Step 3: step 4: Identify the total no of subnets, no. of valid hosts and the broadcast address. Calculate the subnet mask and range Subnet mask for n/w 192.168.10.0/26 is 11111111.11111111.11111111.1100000000 ie 255.255.255.192 range=> 256-192=64 To idettify the total no. of the valid hosts for each subnet. 2^m-2= no.of valid hosts. Where m are the remaining no. of bits in host ID 2^62=62

Table 15: showing subnet mask, valid hosts, broadcast address Subnetwork 192.168.10.0 Valid Host 192.168.10.1 192.168.10.63 192.168.10.64 192.168.10.65 192.168.10.126 192.168.10.12 8 192.168.10.129 192.168.10.190 192.168.10.193 192.168.10.19 2 192.168.10.254 to 192.168.10.255 to 192.168.10.191 to 192.168.10.127 to 192.168.10.63 Broadcast Address

VLSMIn VLSM to allocate IP addresses to subnets depending upon the no. of hosts. The network having more no of hosts is given priority and the one having least no of host comes at last and for each network the subnet is assigned separately. As in the scenario given:

Fig 19: variable subnet mask 3.15 TELNETTelnet stands for terminal network, telephone network, terminal encapsulation on the network. Purpose of Telnet is to access the remote device in order to configure it. It provides textual access of the remote device. It uses the services of TCP. Telnet service is used where small bandwidth is low. It provides textual access of the remote device. Port number of Telnet is 23.

3.15.1 To Access the Device RemotelyFor this purpose we have to assign the IP addresses to the PCs and the interfaces. For Te